Tech Problem Aggregator

msvcrt.dll and bcgcbpro730.dll Causing Problems for WinAmp and Nero

Q: msvcrt.dll and bcgcbpro730.dll Causing Problems for WinAmp and Nero

When I attempt to run WinAmp, I get the msvcrt.dll error and the bcgcbpro730.dll error for Nero Burning Rom (both specfics shown below in the attachment). The other Nero programs are fine, it's just NBR for some reason. I just used it the other day and it was fine; meanwhile, WinAmp's been mean to me for more than a week with this error while I've been trying to find answers to it. I've tried re-installing to no avail. The only updates for msvcrt.dll that I've seen on websites for download are older versions. I have no idea what may have been the catalyst for these problems. I'm running XP, and as far as I can tell, everything else is fine. Kaspersky's not showing any oddities either.

Any ideas?

More replies
Answer Match 84.42%

Whenever I try to select COPY DVD I get the following error messenger. I have downloaded a new DLL file, but it is not working. Any idea?
 

More replies
Answer Match 75.18%

I have Winamp 2.91, and once in a while I'll be playing a song on it and then randomly the track will stop, as well as any sound on my PC. Then, if I'm on AIM, I won't be able to send any more IMs. Out of curiosity, I tried to run netstat, but it said I couldn't execute this program at this time or something.

I have no idea what could be causing this as there are so many weird things going on. Thanks in advance guys.
 

A:Winamp causing problems..

I also have/had this problem too, however the stopping of sound was occuring at other times when winamp wasn't on.

I put the problem down to my SiS driver, although I'm not 100% if that is the actual problem. However since putting in a new sound card I am yet to see the problem occur again and seriously doubt it will.

What motherboard/Operating System do you use?
 

2 more replies
Answer Match 61.74%

dears,

My Winamp 5.62 is crashing while writing data in Nero 10... What wud be the problem... ?

Problem signature:
Problem Event Name: APPCRASH
Application Name: winamp.exe
Application Version: 5.6.2.3161
Application Timestamp: 4e0cc0ab
Fault Module Name: mcicda.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bda18
Exception Code: c0000005
Exception Offset: 00006259
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

A:Winamp Crashing while writing in Nero 10.... plz help

I'm going to tell you something you probably don't want to hear.
For best results when burning period. You do not want any other processes running. Especially those that love to eat up cpu time like media players.

2 more replies
Answer Match 61.32%

hello, I use windows XP - is there anyway with either Nero or Winamp that I can print out my MP3 list?
 

A:Solved: Nero/Winamp print out mp3 list?

8 more replies
Answer Match 60.06%

Hello, I was wondering if anyone else has this problem.. When I have winamp open and running it's like 40-50% cpu usage.. The second I turn it off, it's 0%.. I've reinstalled the program a couple times with different options and it's always the same.

I know it's not my puter : 2600 athlon xp (2.1ghz), SB Live!, gig ddr, 60 gig hd, are among the main specs.

Any suggestions (other than don't use winamp heh). Thanks.
 

A:Winamp causing high cpu usage?

9 more replies
Answer Match 57.54%

I run XP (Home) and something ate (or corrupted) my msvcrt.dll (whatever that is). I had, I'm sorry to say, downloaded a free trial of a pop-up blocker, didn't like it, and opted to uninstall it. A few days later I went to print a USPS label for an eBay sale and my very reiliable HP 722C was dead in the water. I tried to reinstall the printer software and drivers from the HP CD and kept getting this (approx.) message...
"Error 21 'C:\WINDOWS\System32\msvcrt.dll (system file)'
or something real close to that. Other messages followed, none were encouraging.
I just don't know what to try next. I would really appreciate any and all suggestions... we rely on our printer A LOT... I have many photos, we print our own (Hallmark) greeting cards, I am involved in poetry, and am selling off books on eBay and get a price break from the Post Office by printing my own postage labels. None of these things happen without a working printer.
Thanks Much - bwanasafari
 

A:Solved: msvcrt.dll Problems - Help!

6 more replies
Answer Match 54.6%

Hi
Every time I use nero 7 to burn copies of movies or pictures I have a lot of trouble with the computer slowing down and especially when starting up. Is there any way of over coming this? Is there a better software that I should use? Any help would be much appreciated as I am at my wits end.
Thanks
 

A:Nero 7 causing slow PC

CCleaner after the burn
 

1 more replies
Answer Match 49.56%

I have a load of WAVS, MP3's etc.

Is there a way to set Winamp as my default player. At present some times they play via Winamp, but other times it's through RealPlayer, and sometimes it's a mixture of both!.

Any help would be appreciated.

Thanks
jampot
 

A:Winamp problems

Hiya

Which version of RealPlayer have you got? The reason I ask, is that the newer model will only play the mp3's it downloads, and nothing else will.

To try and have a go anyway, try this. For the file that you want to open with WinAmp, hold the Shift key down, then rightclick on it.

Choose Open With...

Pick WinAmp from the list, tick the box, and OK.

Does that work? Also, which version of Windows are you using?

Regards

eddie
 

2 more replies
Answer Match 49.56%

I just installed Winamp. I tried to play a radio station that I previously was able to play with Nero, I Got the following message.

This file does not have a program associated with it for performing this action. Create an associtation in the set association control panel.

I am quite confused. Do I Make the association with Internet Explorer or Winamp? I could really use step by step instructions. I am eager to learn, just need a little assistance.

Thanks

More replies
Answer Match 49.14%

I don't know if this is a Vista error or a sound error, but this has never happened to me before. The other day I opened my winamp & the music plays but there's no sound? I tried everything I can to fix it: I unmuted Winamp, I checked the volume by the soundmixer & checked my sound settings. Like I said, I'm not certain whether it's a Vista problem, but it's never happened to me before. Winamp is my favorate music application & the sound doesn't work

Anyone who knows anything about this problem please help me!!!!

A:Winamp Sound Problems! Plz Help!

Desktop, laptop? Version of Vista? What is listed under "Sound, video and game controllers" in "Device Manager"? Are there any Yellow Exclamation marks shown there? Does it say "working properly"? How old does it say your driver is (date)? Sorry to answer your question with some questions but....

4 more replies
Answer Match 49.14%

Ok so I use winamp to play all my videos. It's a solid program and I like the playlist ablilities and so forth. Well a little while ago winamp stopped allowing me to search through a file for some reason. ( I mean I can't jump from one part of the video to a part later in the video.) All the files used to be searchable, and all of a sudden none of the videos I try to play are! I've uninstalled the program like twice, re installed it, and still nothing. Any idea as to what the problem is?! thanks for any help!
 

More replies
Answer Match 49.14%

Hello,me againWell i have a problem-i cant connect to any winamp internet service(like radio),so they told me to get a hijack log,and well since i already here found help with HijackThis,i figured to go here first,then ill ask them if you are stumped,but i dont belive you will be.So here:Logfile of HijackThis v1.99.1Scan saved at 3:27:40 PM, on 3/4/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\hpnra.exeC:\WINDOWS\system32\hpstatus.exeC:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exeC:\WINDOWS\AGRSMMSG.exeC:\Program Files\iTunes\iTunesHelper.exeC:\Program Files\Zone Labs\ZoneAlarm\zlclient.exeC:\Program Files\QuickTime\qttask.exeC:\Program Files\Winamp\winampa.exeC:\Program Files\Grisoft\AVG Anti-Spyware 7.5\avgas.exeC:\Program Files\Sunbelt Software\CounterSpy\SBCSTray.exeC:\Program Files\Java\jre1.6.0\bin\jusched.exeC:\PROGRA~1\AIM\aim.exeC:\WINDO... Read more

A:Winamp-internet Problems

i really dunno,im waiting for 10 days for ANY reply,i really dunno whats going on here,i even posted on that havent had a reply in 5 days.is there no solution????

16 more replies
Answer Match 49.14%

Hi all
I know you'll probably want system info and everything but can we go into that after :).
I'll explain my problem and then you tell me what I need to do.

Ok it would appear that when I have MSN (I assume it's latest version...humour me for now) or Winamp my CPU useage frequently bombards upto 100% causing great lag on my XP home PC.

Ive run scans, mallware scans adware scans and turned up 0.

Any thoughts on this situation.

:)

Ta

A:Problems inside Xp regarding msn and winamp

its now also causing the cpu to go into 100% when I watch movies/have yahoo messenger open/aol instant messenger and even when I surf on flash based sights it causes lag and makes the sound stick and come out of my speakers all crappy like a broken record.

1 more replies
Answer Match 49.14%

I've been having a problem with my sound card/winamp player. I don't know what's causing it. I can play music for awhile with no problem then all of a sudden winamp stops playing and won't play again until I reboot. I am using the newest version of winamp and have a built in sound card on my motherboard that uses the sis 7018 audio driver. I also have the updated driver. Any idea what could be causing this? Thanks.
 

A:Sound problems with winamp.

Is there any specific file format that causes the issue?
Is the problem present when you play from a cd, from a file from on a drive, or via a network?

If the issue is present all the time, then I'll suggest to use msconfig to diagnostic the issue, by selecting selective starup.
 

2 more replies
Answer Match 49.14%

Hello!

I`m having a little bit of a problem with my winamp playlists. I have an external hard disk with all my music, and i created a winamp list with some of it. Whenever i want to play the list i just connect the hard disk and it`s done...But as of today the playlist is not working anymore. It loads perfectly and i can see all the songs, but when i decide to play any of them, it starts jumping to songs (looking for songs to play, as if the music had been removed from it`s source).
I`ve tried opening the songs separately directly from the explorer and it works perfectly, so i know the computer is recognizing the disk.
Do you have any idea what the problem could be and how to solve it?

Thanks a lot!!

A:Problems with winamp Playlists

If the drive letter for the External drive has changed or if the songs are in a different file name or location on the drive, then Winamp will have the old mapped songs listed but not know where they are, because the drive letter or the name of a file or the location of the file has changed. You can change the drive letter back or the location of the files back to the way it was or Delete the songs in the library and re-add them.

2 more replies
Answer Match 49.14%

Hi...

I'm looking for a good winamp skin maker...

I've done some seraching over google, msn, yahoo... and I only got "Winamp skin maker v1.05,1.2" and I'm not really satifisifed becuase I wanted to be able to edit the skin for the libarary list now in version 5 for winamp and so... I wanna ask if u guys can find 1 that can support the new modern skins for winamp thanks!
 

More replies
Answer Match 48.3%

It seems Winamp's Online Service section (Including ShoutCAST TV, and the like) is having problems due to IE 7's strict security. The Online Services icons will not load, and when I click on them I get a scripting error. I posted in Winamp's forums too, and apparently the problem is I need to specify which external application can use ActiveX and Javascript. Anyone have the same or similar problem, and know how to specify these external apps, or have any other suggestions to solve this problem?

Thanks.

More replies
Answer Match 47.88%

hi tsf love the site.. guys i have the lastest winamp i have a 1mb connection, everytime i click on the live video it plays 4 2 seconds the buffers again nothing plays on it even live radio stations keep breaking up i try real one player live streams they work ok but my pc must have a problem with winamp aslo i shud down my mcafee wen i do it but the real player plays good with it on .i dont knw wat 2 do 2 fix this problem heres my hijack this log hope u guys can help


Logfile of HijackThis v1.99.1
Scan saved at 17:13:26, on 02/08/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\McAfee Privacy Service\GUARDDOG.EXE
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\PROGRA~1\McAfee\SPAMKI~1\MSKSrvr.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\wdfmgr.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\McAfee\McAfee Privacy Service\GUARDDOG.EXE
C:\PROGRA~1\McAfee\SPAMKI~1\MskAgent.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MpfTray.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.... Read more

A:winamp live media stream problems (from XP)

You've got some dirty entries in there, I am going to send this thread to the security section and they will tell you what to remove.

As for the streaming video, you know you can increase the buffer size right? That would help in the case of a video, but not neccessarily a streaming audio (radio etc...)

5 more replies
Answer Match 47.04%

Hey guys,

So far I've been less than impressed with Windows 10's system permissions. I am in the Administrators group, as the only user on my PC, but yet I still have to provide UAC confirmation any time I try to do anything system-related. A bit ironic, no?

Well, for some programs this is a huge issue. I'm using an older version of Winamp to play my music (long story short, the new versions have a lot of shareware crap built in, since they stopped making it a free program and instead wanted you to pay...)
It's an old program, probably from 2003 or something, but it's worked fine on every version of Windows so far. Rather than using %appdata%, it just stores its settings locally. Winamp.ini and winamp.m3u store the settings and location of most recently played file respectively, and they're located in C:/Program Files (x86)/Winamp

Right, so here's the thing. I have a mIRC script that reads Winamp's activity, and can show what song I am playing. If I run the app normally, it will not modify winamp.m3u (even though I've already edited the permissions of that file and the entire Winamp folder so that Users have full control... shouldn't matter since I'm admin but I digress). If I do "run as administrator", play a song and close the program, the m3u DOES get updated with the new song's location. However... my mIRC script doesn't behave when I do that, since the script still runs as a normal user like any other program, and somehow it just takes the bitrate, fi... Read more

A:Winamp Issues with winamp.m3u and permissions

This is not a Windows 10 issue, it's working as it should, protecting the Program Files folder as designed. By default Windows protects the system folders with global security settings, everything placed for instance in Program Files and Program Files x86 folders inherit these global settings only giving users and groups permissions to Read, Read & execute and List folder contents.

Your case is a typical example of this, another is for instance trying to save a text document from Notepad to Program Files or Windows folders; it won't work when Notepad is run normally giving Access Denied error, but can be done if Notepad is run as the built-in administrator.

In your case it's not you as an admin user who should get the write permissions, it's (as far as I know) the group ALL APPLICATION PACKAGES:

However, I do not recommend changing the default security settings of system folders. A far more simple solution would be to reinstall the software in question in another location, not in a system folder. Install your older WinAmp for instance to D:\WinAmp and you should have no issues, subject to you being able to edit your mIRC script to change the location from where it retrieves the information.

Kari

3 more replies
Answer Match 43.68%

i have got windows 2000 and recently i have been getting heaps of errors and problems when i install, play or uninstall games and apps.
one of the window boxes reads:
Microsoft Visual C++ Runtime Library (title in the blue thing)
MSVCRT.DLL for Win32
Error: MSVCRT.DLL not compatible with Win32s

i need every bit of help coz i dont know what to do or what this is
 

A:msvcrt.dll

6 more replies
Answer Match 43.68%

hello please i need help here
i downloaded need for speed most wanted 2012 skidrow and when i instald it i got and error saying
the procedure entry point_except_handler4_common could not be located in the dynamic link msvcrt.dll
and some website saying that i should delete a file called DWMAPI.DLL in windows but this file is not in C: and i cant find it
so if you can help me that will be great
and i tried to put file msvcrt in C:\Program Files\EA Games\Need for Speed Most Wanted and dont work to nothing change
 

A:msvcrt.dll

7 more replies
Answer Match 43.68%

I ****ed up my PC because of msvcrt.exe. Whenever i open an .exe a pop-up with "msvcrt.exe Send Error Report/Don't Send Error Report" comes up.. So i decided to look for it and delete it. I found it in /windows/system32 directory. And i deleted but.. But after i deleted it, i cant run programs anymore.. Whenever i double click an .exe it always "open with and a program list comes out and browse program" thing.

But if i right click on a program and choose run as, it works.

I did system restore but this problem is still here..

A:msvcrt.exe

If you have a look at this link you should get help with setting things right:

http://www.bleepingcomputer.com/star...i32-12387.html

However it may be easier to boot up from the Windows installation CD and elect to repair your existing installation of Windows.

1 more replies
Answer Match 43.68%

Hi i am getting an error "The procedure entry point **** cound not be located in dynamic link library msvcrt.dll" whenever i open browsers or messenger, i dont know what it means and what it is, can someone please help me out here.

I am using XP SP3.

A:msvcrt.dll

You can always download the fresh original file here - http://www.dll-files.com/dllindex/dl...s.shtml?msvcrt

Run a search for msvcrt.dll to determine where the file is (should be c:\Windows\System32) and then copy the downloaded file there.

If the file is still in use, try killing the process with the task manager or booting into Safe mode and trying that again.

3 more replies
Answer Match 43.68%

   Warning
Winamp.com and associated web services will no longer be available past December 20, 2013. Additionally, Winamp Media players will no longer be available for download. Please download the latest version before that date. See release notes for latest improvements to this last release.
Thanks for supporting the Winamp community for over 15 years.


Improved: Added a Reset button to clear history in the Open/Add URL dialog
Improved: Added an option to disable the mouse wheel from altering the volume
Improved: Added more commandline switches (run: winamp.exe /? to see full list)
Improved: All menus now use the skinned style when option is enabled in ML settings
Improved: Disable all online features when no internet connection selected in Prefs
Improved: High DPI & text scaling compatibility fixes for dialogs & library views
Improved: Increased notification area tooltips up to 128 chars (instead of 64)
Improved: Library views now optionally group the 'Play' and 'Enqueue' buttons
Improved: Mass metadata editor from library now also available in Playlist Editor
Improved: Retry UAC prompt if user previously selected "No" (for relevant settings)
Improved: Speed-up of Winamp shutdown process
Improved: [gen_ff] Added a setting to control show/hide time for docked toolbars
Improved: [gen_ml] Drag & drop handling tweaks
Improved: [ml_downloads] Added 'Size' column
Improved: [ml_history] New options... Read more

A:Winamp 5.66 Last Winamp version

Goodbye to a good friend. WinAmp served me well.

3 more replies
Answer Match 43.26%

I have nero 7 and have recently saved a complete and compressed movie to my hard drive which is less than 4.7g now i can't seem to burn it using nero 7 HELP! can some one give me step by step instructions on what to do after the program has been opened
 

More replies
Answer Match 43.26%

Hi there i was wondering if someone could help me out i tryed using my nero programme yesterday and it seems that i cannot burn cdrs without the pc lagging (snail speed) and ive wasted nearly 20 cdrs just to see if it works the cd rws burn fine its just dvdrs and cdrs if someone please could help me ive tried everything

ive tried system restore
ive tried update the drivers for it
unistalling nero 7 and trying 6 ive tried everything there is i can think of

if someone could help me id be most grateful

my dvd burner is dvdrw-ide1004
and my dvdrom/cd/cdrw is
HL-DT-ST RW/DVD GCC-4320B

please someone help
 

More replies
Answer Match 43.26%

O.P.I have triend installing the program, but when I try to burn DVDs I just get this message:

One or more files could not be added to a compilation.

The following files may not reside in the VIDEO_TS directory of a DVD-Video compilation. Only compliant DVD-Video files
VIDEO_TS.IFO,
VIDEO_TS.VOB,
VIDEO_TS.BUP,
VTS_nn_0.IFO,
VTS_nn_0.VOB,
VTS_nn_0.BUP and
VTS_nn_m.VOB
can be added to the VIDEO_TS folder. Please add files from a completed DVD-Video title or use an authoring software like Nero Vision to create DVD-Video files from standard video files such as *.avi and *.mpg.

Any advice would be MUCH APPRECIATED!!!

More replies
Answer Match 43.26%

I am trying to open Nero 5.5 to copy one of my CD's. The software opens OK and the CD light comes on green when you insert the disc and you hear the disc spinning - but it doesn't move beyond that. Eventually, the green CD light turns to orange and it stops trying. It then says Nero is not responding I have tried rebooting. Can any one tell me how I might fix this and what it could be?? thanks!
Dorothy
 

A:Nero 5.5 problems

16 more replies
Answer Match 43.26%

yeah i just want to know why both my nero versions 6 and 7 don't accept and say that they don't support my mpeg files or my avi files. I've tried converting them, but the problem is that i don't know what to convert them into so that nero and another program called roxio accept them too.
 

A:nero problems

Never had a problem with Nero and avi files. What are you trying to do - play, burn to dvd (have to use data dvd function for that)?
 

3 more replies
Answer Match 43.26%

Hey all. I am new. If I am posting this to the wrong section please let me know... I ma having problems burning a CD with Nero...

Whenever I press the BURN button, it automatically ejects the CD before it burns.

I get the following message. What does it mean, and how do I fix it?

Thanks
Matt
Here is the message

The recorder does not support this type of media
please insert a correct medium to write to

Medium required for the compilation CD-R/RW

Medium type in recorder:Empty
 

A:NERO Problems

9 more replies
Answer Match 43.26%

Hi,

I have previously used Nero 5 to burn a variety of audio and data with no problems.
However it does not seem to be able to copy Playstation games. When I use a RW disc it just flatly refuses to work, citing 'disc error'
When I use a CD-R disc it appears to burn in the normal way, and even states 'burn successfully completed' at the end. However the disc refuses to play (I should point out at this stage that my Playstation is, shall we say, 'suitably configured' to play these discs and in fact has played discs burnt on friends PC's without problems.)

Am I doing something wrong or will Nero not do this kind of thing. Is there any other CD burning software that I can use that will do the job (ideally free of charge)

I am running Windows XP

Any help appreciated.
Jampot
 

A:Problems with Nero 5

Its slightly more complicated than just burning with Nero, however we are not supposed to be helping with modded consoles and pirate games and all that. Google it, or have your friend teach you how.
 

3 more replies
Answer Match 43.26%

i try to erase a dvd-ram with the nero 6 program.i see a mesage "driver is in use by another aplication".I CANT ERASE MY DVD-RAM CDS.I HAVE WINDOWS XP.ALL THE UPDATES,WINASPI.
 

A:problems with nero

Try this:

Start/Settings/Control Panel/Admin Tools/Services. In the R pane, find IMAPI - CD Burning COM Service. R click it; L click Properties. In "Startup type" change it to manual or disabled. Apply/OK and reboot.

Edit: screenshot attached
 

1 more replies
Answer Match 43.26%

Good day, im new here. i have problems installing Nero 8. after the installation when i open Nero, there's an error messate that states "Nero cannot start because there is an error in the configuration settings, reinstalling this application may fix this" i tried reinstalling but it still displays the same error message. i've used the Nero general clean tool, manually delete the folders, run a registry cleaner but still no luck. can somebody please help me. it really irritates me. thanks .

More replies
Answer Match 43.26%

My Nero will not open, uninstall or install. i had the pe_parite a virus on this computer after i got XP and it took a while to get rid of. as some of you might know, you have to go into the registry and delete the value. then i had 2 go through a bunch of RBO files (no clue wut those are) including one from nero. most of the programs quit working after i deleted the RBO's so i deleted them but they were nothing important. Nero i need and im kinda at a dead end here so i need some help.
 

A:Nero 5 problems

16 more replies
Answer Match 43.26%

I can't install Nero ImageDrive, for some reason. I tell it to install, and it says it's installing, but then it goves me a window that says "Driver installation failed!"

Any suggestions?

A:Nero Problems

Hello, Hello? Help would be appreciated.

4 more replies
Answer Match 43.26%

I have just loaded Nero 5.5 and it is asking me to choose my recorder but there doesn't seem to be any way of doing this - can anyone tell me how to do it please? also, it only mentions CD's whereas my drive is a dvd drive does that mean I can still backup dvd's?
I have a modern computer and use windows XP. Thanks
 

A:Nero 5.5 problems

I think some specifics on the make/model of your optical drive, the O/S in use, as well as some details on the system would help a bunch. Nero 5.5.10.56 that I use supports DVD and CD drives.
 

1 more replies
Answer Match 43.26%

i have put nero on the brothers computer and now it takes roughly 3 minutes for the computer to come on. can any1 help me please. it came up with a fatel error message. cant remember wat i said though. i have had a simliar problem on my computer be4. i tryed to taking nero 6 out and didnt make any diffence. so i reformated the computer hoping that will sort the problem out but it hasnt. can any1 please help me. thanks
 

A:Nero 6 problems

Check your hard drive in device manager. the IDE channel it is on should show it operationg in UDMA mode 4 or 5 if it shows PIO mode uninstall and reboot and let windows reinstall the channel when it reboots.
 

6 more replies
Answer Match 43.26%

hey folks,

using nero 5.5.2.8 with a yamaha cdrw 20/10/40 ---

if your familiar with this burn program, it's uses a pretty simple drag and drop system...choose from the right window of choice and drag and drop to the left or new compilation window. it also has a "wizard" helper that simplifies the process even more so.

my problem- if i am selecting a single song for a new compilation from a cd in d drive nero doesn't seem to able to identify specific track information for that single track at this time. all the tracks have a generic tag - track 1, track 2, etc. . if you are copying an entire disc through the wizard it checks out cddb and finds the album/track info. i need this function when it first reads the disc so that i can choose single songs.

the help section is incredibly complex and i cannot locate how to get individual track info so i wonder if there one of you out there that knows if there is an adjustment i can make and how?

sure would appreciate it
 

A:nero problems

Works here. Here is how I do it. ( version 5.5.9.13 )

Open Nero Burning Rom.

Start a new Audio CD.

In the File Browser on the right, navigate to the music cd you want to copy from.

From the list of tracks in the bottom pane of the File Browser ( Track 1, Track 2, etc.) you select a track, right-click on it, and choose "Copy to compilation"

The "Adding files" window should pop up.
If it's a new CD that isn't stored in your local database, another window will pop-up that has options for either entering the track info manually, or checking the cddb online. If you have the database info set up correctly in nero's preferences, it shouldn't have trouble fetching the album info. If it finds the album info, it will be dispayed, and you then select the album name and click the button to use that.

After it finishes analyzing the track, you should see the song listed (with it's proper name) in the compilation window on the left.

Once you've done this for 1 track on a cd, the rest of the songs should already be recognized and you won't have to go thru the whole database procedure again.

The files in the File Browser remain named Track 1, Track 2, etc., ~ only the files added to the Compilation window (default name = Audio1) will be relabled with the cddb info.

- If it doesn't pop up with the window that asks you for track name or database info, it might be because there's a checkbox on it that says something like &... Read more

2 more replies
Answer Match 43.26%

I am trying to convert video files downloaded off the internet (anime in mpg and avi format) into vcd and dvd's. however when watching the discs, the subtitles to the anime are cut off at the bottom so that i can only see the top portion of the text. is there a way to compress the picture so that the whole frame can be shown w/o it being cut off? i tried the 4:3 setting but the same thing happens. any help would be very appreciated.

thanks
 

A:Nero 6.6 vcd/dvd problems

Hiya and welcome

When you say downloaded off the internet, are these from p2p programs or from a paid site?

Regards

eddie
 

1 more replies
Answer Match 43.26%

When I try to copy a DVD using Nero 8 on Vista Ultimate 64-bit SP1, it simply goes up to certain percent and then my system freezes and it does not respond... I have to restart it manually...
I can normally copy content from DVD in some folder, it does it at 11-12 MB/s average...
I can also burn content to DVD using Make Data Disc option, and it does it in some 12 minutes on 12x speed (I have a Samsung DVD-RW drive)...
What could cause this problem, is it Nero or Vista?
I also have problems with Nero Vision, when I try to make a DVD video disc, after importing files, it stops and shows me "Don't send" error...
 

A:Nero problems

Run CCleaner and try again

Because your system froze you might want to run CheckDisk on the drive

There is also the chance that your Ram has got problems.
You could try Memtest for 7 Passes on it.
 

1 more replies
Answer Match 43.26%

hi im new here and I was wondering if someone can help me. I recently bought Nero version 6 with all the accesories and dtuff so when I go to nero RomburningSE i was able to just click and burn at first. I then unplugged my laptop and tried to do it again but now my computer seems to think that is a cd i guess and will not burn it to my external sony dvd drive no matter what I do can anyone help please? thanks
 

More replies
Answer Match 43.26%

Hi,

I have re-install Nero 7 on my PC after experiencing some problems (the "ADD" button didn't respond when I want to make data DVD's)with it. After I have installed it again I tried to make some data DVD's and it worked fine the first time but when I try to do it again short afterwards it didn't want to add any movies. When you click on the "add" button it doesn't respond at all even if I restart the PC. Is there something that I do wrong or is it a setting that needs to be changed?

Many thanks in advance!
 

A:Nero 7 problems

You didn't say what version of Windows you have - Nero 7 may not be compatible if you have a new version of Windows.
For example, the standard edition of Nero 7 is not compatible with Windows 7 whereas Nero 7 Ultra is.
 

2 more replies
Answer Match 43.26%

HI,

Running Nero 6 with XP Pro
I am trying to creat some SVCD's from some mpeg music files,
and I am having all sorts of problems?

1. When I am dragging the files across to Nero, eventually Nero will hang (Microsoft sending report etc)

2. If I select fewer files to drag accross, this seems to solve the initial problem, but when going through the "Encoding Video SVCD" seems to get to about 30% then comes up with error **Unknown error in the Video mpeg encoder**

3. Also a few of my mpegs, when dragging accross to Nero, brings up error **Stream encoding which is invalid for Video CD?**

Really would like to know what can be done? Is this a Nero problem? Encoder problem? some dogey files? or maybe all of these??

Can someone help/advise. Thanks
 

A:Nero 6 Problems?

9 more replies
Answer Match 43.26%

I have started to have problems with my Nero 7. It gets to the point of burning a cd and just freezes on me. I have tried reinstalling the software, so i thought it was the burner. So i downloaded Nero 6 and it burnt the cd but 6 is a lot slower then 7.

More replies
Answer Match 43.26%

Hi,
I recently had to re-install WinXP on the work computer. Slowly getting the bugs out of the other progams...
Today I got an error message that directed me to download a Nero patch... well, at re-boot, had same error message, directing me to same download. I would have reported the problem to them, but the form is so complicated, I can't figure out all the lines...
Anyway, I don't have problems with my Hot Burn program, I'm wondering if Hotburn would work on the Nero CD Burner? Both are free with the Burners I installed.
Thanks for any advice.
 

A:Nero problems

Most burner software works with a cd burner in my experience.
 

2 more replies
Answer Match 43.26%

Recently I tried to use my Nero program to record data to cd. Nero opened fine but when I clicked make data cd, I got a message " Can not execute file "C:\Program File\Ahead\nero\nero.exe".
While checking I found when I clicked on any of the make (data,audio or video) cd's I would get that same message. I used Nero's clean up tools, which took all of Nero's software out and then I reinstalled . I still got that same message.
I am running Windows Me, Pent. III and plenty of RAM.
Anyone have any ideas?
 

More replies
Answer Match 43.26%

I JUST BOUGHT NERO WAVE EDITOR 2. I 'M HAVING A PROBLEM BURNING CASSETTES IN CD'S . AFTER I BURN THE CD THERES NO MUSIC ON IT. I HAVE WINDOWS XP
 

A:Nero Problems

10 more replies
Answer Match 43.26%

Hi,

I have been using Nero 5 (Nero Express) to provide back up copies of data and have been advised not to copy 'on the fly' but to rip initially to my hard drive and then to blank CD-R/CD-RW as this provides a more stable copy.

My question is this: Once the disc has been copied in this way, ie from source disc to hard drive and then to blank media, does this then remove the files from my hard disc, or are they still there?

If they still remain how do I remove them?
Thanks
Jampot.
 

A:Problems with Nero 5

Once you have burned the cd the files are deleted by default. Also if you have a newer writer with burnproof or similar you should be able to copy on the fly no problem whatsoever.
 

2 more replies
Answer Match 43.26%

Hi my brother is using Nero Express 6 and he can burn files from his PC to a CDR but if he is copying a audio CD it reads the disc and copies to the hard drive but after it has asked for the appropriate blank disc it stops and the message "illegal mode for this track" appears and the disc draw opens again this happens with any audio disc!
I also run Nero Express 6 and I dont have any problems at all. He is running an older computer AMD 400 processor which he has installed a DVD burner drive into.The NERO software came with the burner so I would of thought it would work OK please if anyone has any ideas please advise!

Thanks bubz7471
 

More replies
Answer Match 43.26%

Hi there

Ive just tried to reinstall nero 7. When I go to Nero vision to try and burn a DVD it comes up with the following message

"Failed to load the capturing subsystem"

Please help
 

More replies
Answer Match 43.26%

Well I've had it with Nero 7. The new Nero 7 has been out for some time, and they still haven't got rid of the "demo" in the updates. Now in the new update this month, April 27, The slideshow transitions are not working correctly. I used it, and some of the transitions are hanging up on my DVD player. The ones that "turn" seem to hang up. When I use the random transition to all my jpegs, is when I have the problem. I'm giving up on them, they can't seem to get their act together with the Nero staff. I'm looking for a "GOOD" program to use with my JPEGS and AVI, MOV, or any movie files to make slideshows with transitions. I would also like to use moving text, or add special graphics like holidays, birthdays, etc. It must be user friendly also. In the $100 - $150 range or lower, with free updates, until the version changes. It must also have the ability to add music in wav, mp3, (midi if possible).
Thanks, Silverado
 

A:Nero Problems

You can look into the Ulead Products, they offer free trials:

http://www.ulead.com/store/store.htm
 

3 more replies
Answer Match 43.26%

i accidently uninstalled nero,i think,but iwas trying to reinstall nero.but wont let me,it keeps saying that nero is on pc.but i cannot find it.

A:nero problems

use the nero removal tool
http://ww2.nero.com/nero7/enu/General_CleanTool.html

1 more replies
Answer Match 43.26%

Hi there i need help

Just tried to install nero 8 trial. we suffered a power cut half way through

i am unable to continue with the installation, nor can i remove it

please help me, what can i do.
 

A:Nero 8 problems

Hi, welcome to TSG.

See if this helps, go here http://www.nero.com/eng/downloads-cleantools.html, download and run the Nero 8 CleanTool. Then try to reinstall.
 

3 more replies
Answer Match 43.26%

Hi,
Im trying to burn a dvd onto a disc and when Nero is coding my videos into PAL format.. Nero just dies.. It gave me an error log and this is what it said at the bottom


[19:26:38] NeroVision Windows XP 5.1
[19:26:38] NeroVision IA32
[19:26:38] NeroVision WinAspi: -
[19:26:38] NeroVision ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
[19:26:38] NeroVision NT-SPTI used
[19:26:38] NeroVision Nero API version: 7.5.7.0
[19:26:38] NeroVision Using interface version: 7.0.5.6
[19:26:38] NeroVision Installed in: C:\Program Files\Nero\Nero 7\Core\
[19:26:38] NeroVision Application: ahead\NeroVision
[19:26:38] NeroVision Internal Version: 7, 5, 7, 0
[19:26:38] NeroVision === Scsi-Device-Map ===
[19:26:38] NeroVision DiskPeripheral : WDC WD2000JB-55GVA0 atapi Port 0 ID 0 DMA: On
[19:26:38] NeroVision CdRomPeripheral : CyberDrv CW099D CD-R/RW atapi Port 1 ID 0 DMA: On
[19:26:38] NeroVision CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
[19:26:38] NeroVision DiskPeripheral : ST3320620AS SiSRaid Port 2 ID 0 DMA: Off
[19:26:38] NeroVision === CDRom-Device-Map ===
[19:26:38] NeroVision CyberDrv CW099D CD-R/RW D: CDRom0
[19:26:38] NeroVision TSSTcorp CD/DVDW TS-H552B E: CDRom1
[19:26:38] NeroVision =======================
[19:26:38] NeroVision AutoRun : 1
[19:26:3... Read more

A:Nero problems.

when you say you are trying to burn a dvd onto disc, have you downloaded it, or are you copying a dvd?
Nero is good but it cant do everything. it may be running out of memory during the burning or conversion. some formats allow to convert only so far then cut out, so you cant copy or burn. i dont understand all of the jargon that you have posted, but i have had similar in the past. i dont download video anymore. it too much bother trying to convert.
try here for more advice. http://club.cdfreaks.com/showthread.php?t=113384 or here http://www.velocityreviews.com/forums/t270227-question-concerning-pal-with-nero-6.html
 

1 more replies
Answer Match 43.26%

I have two computers which have very similar hardware configurations. The mother boards and processors are exactly the same. My father-in-law was running #1 and I was running #2. Both had Juno installed and were running fine. Computer #2 still is, while computer #1 started giving a page fault and referenced msvcrt.dll when Juno was executed. I formatted the harddrive and Windows would not re-install. I put the harddrive in #2, and installed Windows 98, then put the harddrive back in #1. After installing Juno, same problem occured. I have tried everything in your forums. There is only one msvcrt.dll file on the computer, and the SPEU.exe patch that MS offers does not fix it. Why would the two computers return different results? Is there a fix for computer #1?
 

More replies
Answer Match 43.26%

I'm getting the msvcrt.exe error message sometimes when I get on internet explorer. I've done a system restore and this doesn't cure the problem, and it's effecting my use of AIM too. Can someone PLEEEEEASE tell me how to repair this problem STAT!!!

Thanks a bunch!
Chrisy

A:msvcrt.exe error

Looks like an infected service is running on your system. Get help from the security section. Time for clean up.

1 more replies
Answer Match 43.26%

Yeah, I was stupid enough to listen to my friend when trying to fix an error with msn messenger. I replaced the msvcrt.dll file with a different one, and now my laptop is stuck in an infinite boot/reboot cycle. I can't boot in safe-mode, and I can't figure out how to get a command prompt up to move the file back manually.
The old file is sitting on the administrator's desktop. How should I go about getting this fixed?
I've already attempted safe-mode (won't boot), last known good configuration (didn't work), and I can't figure out the windows recovery console. I also can't seem to find how to boot directly to dos to fix this.

Any help would be appreciated!

A:Screwed with msvcrt.dll

I'd also like to add that I can't boot in safe mode at all, including the ones with networking and the command prompt.

2 more replies
Answer Match 43.26%

My comp still has errors almost definitely due to a stuffed up msvcrt.dll How do i replace it with the original one from the windows 2000 cd? Or what other remedy can you people advise?
 

A:replacing msvcrt.dll help!

Hi, Go here.

http://dll.softandco.com/dll/3/Msvcrt.dll.html

Peace Mal
 

1 more replies
Answer Match 43.26%

explorer shut done because of error caused by msvcrt.dll, I have had trouble getting to e-mails got that fixed now have this problem. I have repaired explorer and run windows update my msvcrt.dll is version 6.10.8293.0 Can you help?
Here is Hijackthis log:

Logfile of HijackThis v1.97.7
Scan saved at 1:06:48 PM, on 6/1/04
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\SYSTEM\MSTASK.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\SYMTRAY.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCEVTMGR.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCSETMGR.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCPROXY.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\SNDSRVC.EXE
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\PROGRAM FILES\ESOFT\EBOARD\EBOARD.EXE
C:\PROGRAM FILES\NETZIP CLASSIC\NZFPROP.EXE
C:\PROGRAM FILES\2WIRE\HOMEPORTAL\2PORTALMON.EXE
C:\WINDOWS\SYSTEM\QTTASK.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCAPP.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCPD-LC\SYMLCSVC.EXE
C:\PROGRAM FILES\COMMON FILES\REAL\UPDATE_OB\REALSCHED.EXE
C:\PROGRAM FILES\WEBROOT\SPY SWEEPER\SPYSWEEPER.EXE
C:\WINDOWS\SYSTEM\WMIEXE.EXE
C:\WINDOWS\SYSTEM\DDHELP.EXE
C:\WINDOWS\SYSTEM\SPOOL32.EXE
C:\WINDOWS\SYSTEM\PSTORES.EXE
C:\MY DOCUMENTS\MY MUSIC\DOW... Read more

A:msvcrt.dll eror

Hi, Please read about this update and apply it if you like- it should solve your problem, unless it is a program like MailWasher that is causing trouble. I have not looked all through your HJT log.... so someone should advise about that soon, I did see NetZIP which I think is not reccommended, and since you are using Norton Internet Security, there may be issues with that, too.

Here is the location for the Library update:
http://www.microsoft.com/windows98/...ecommended/S_WUFeatured/Libraries/Default.asp
Read this below first, please.
What, where, why page:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;197298

EDIT: Here is some stuff about NetZIP:
http://grc.com/downloaders.htm
http://editor.actrix.co.nz/byarticle/spyw.htm
 

3 more replies
Answer Match 43.26%

how to rectify msvcrt.dll error it appears on IE in win xp? pleeeeeeeeeeese help out.

thanks
Theone1

A:msvcrt.dll error

Hi TheOne,

We'll need a bit more information to go on - Like what the error message says and, if you can get one, a screen shot would be great.

It's worth knowing that the most common 'MSvcrt.dll' error is thrown when a program accessing the 'MSvcrt.dll' file is unable to find the procedure entry point. You may receive error messages similar to the following when you start your Windows XP system:

Lsass.exe: Entry Point Not Found
The procedure entry point _resetstkoflw could not be located in the dynamic link library Msvcrt.dll.

Services.exe: Entry Point Not Found
The procedure entry point _resetstkoflw could not be located in the dynamic link library Msvcrt.dll.

When you select the OK button on the error message box, a blank desktop will be displayed on your screen. Your mouse pointer will still be present and working, you will not have anything on the screen to click and you will not be able to use your keyboard.

These errors usually occur if the original Msvcrt.dll file on your system is replaced with a third-party file that does not include the _resetstkoflw function required to recover from stack overflow.

To repair the issue of missing _resetstkoflw function, you will have to restore the original Msvcrt.dll file from the Windows XP installation CD-ROM. You can do this, by performing the steps listed below:

1. Insert the Window XP installation CD-ROM in the CD drive and boot your PC from the CD-ROM.
2. When the Welcome to Setup screen is displa... Read more

1 more replies
Answer Match 43.26%

I've earlier posted my problem here
[?] http://www.techsupportforum.com/f10/...ml#post2733501
Following your 1st steps, I obtained this in dds.txt


DDS (Ver_10-03-17.01) - NTFSx86
Run by Administrator at 20:22:39.43 on 2010:05:21
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2039.1629 [GMT 5:00]


============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
C:\Program Files\AVG\AVG9\avgchsvx.exe
C:\Program Files\AVG\AVG9\avgrsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\Program Files\AVG\AVG9\avgwdsvc.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\AVG\AVG9\avgemc.exe
C:\Program Files\AVG\AVG9\avgnsx.exe
C:\Program Files\AVG\AVG9\avgcsrvx.exe
C:\Documents and Settings\Administrator\Desktop\dds.scr

============== Pseudo HJT Report ===============

uStart Page = hxxp://home.speedbit.com/?aff=105
uSearch Page =
uSearch Bar =
uDefault_Search_URL = hxxp://www.google.com/ie
uInternet Connection Wizard,ShellNext = hxxp://www.google.com/
uSearchAssistant = hxxp://www.google.com/ie
uSearchURL,(Default) = hxxp://www.google.com/search?q=%s
mSearchAssistant =
mCustomizeSearch = hxxp://dnl.crawler.com/support/sa_customize.aspx?TbId=60002
uURLSearchHooks: AVG Security Toolbar BHO: {a3bc75a2-1f87-4686-aa43-5347d756017c} - c:\program files\avg\avg9\toolbar\IEToolbar.dll
uURLSearchHooks: H - No File
mW... Read more

A:msvcrt.dll as Trojan

Hi,

Please do not run any scans or fix any items while we are working together, or that can make diagnosis more difficult, please make certain AVG is totally disabled prior to running the tools:

Please do the following:

We need to disable your CD Emulation drivers, or they can interfere:

Please download DeFogger to your desktop.
Double click DeFogger to run the tool. The application window will appear
Click the Disable button to disable your CD Emulation drivers
Click Yes to continue
A 'Finished!' message will appear
Click OK
DeFogger will now ask to reboot the machine - click OK
IMPORTANT! If you receive an error message while running DeFogger, please post the log defogger_disable which will appear on your desktop.
Do not re-enable these drivers until otherwise instructed.


NEXT


Download ComboFix from one of the following locations:
Link 1
Link 2

VERY IMPORTANT !!! Save ComboFix.exe to your Desktop

* IMPORTANT - Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools. If you have difficulty properly disabling your protective programs, refer to this link here Double click on ComboFix.exe & follow the prompts.
As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this... Read more

19 more replies
Answer Match 43.26%

yes let me start off by saying happy holidays to everyone ok so the other day i started getting this error in my Xp rig the procedure entry pointcould not be located in the dynamic link library msvcrt.dll so i did a little searching on the internet and came across this microsoft article support.microsoft.com/kb/324762 and i followed the instructions to a t and all went well until the part where it says cd \i386 i couldnt get that part to work at all and now my Xp rig wont boot or should i say it will act like its loading the Xp program and then after the windows Xp screen it restarts and it will continue to do this i have even tried last known good configuration and safe boot all to no avail please help anyone that can please it will be greatly appreciated

A:msvcrt.dll problem help

Did you have the cd \i386 in your Optical Drive? As Microsoft says, and we preach, don't get your drivers from 3rd party sources.

3 more replies
Answer Match 43.26%

Problem signature:
Problem Event Name: APPCRASH
Application Name: ffxivgame.exe
Application Version: 0.9.1.0
Application Timestamp: 4c8161bf
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.7600.16385
Fault Module Timestamp: 4a5bda6f
Exception Code: c0000005
Exception Offset: 0000a06e
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I keep getting this error whenever I try to run this program. I'm running windows 7 professional 64 bit. My video card is Nvidia Geforce GT 330M. My laptop is only a couple of weeks old. I haven't run into any other crashes when opening other programs.

Things I have tried:
-reinstalled program
-updated video drivers
-system file check scan
-upgraded and updated windows
-cleaned up registry
-scanned for virus, malware, spyware

Thanks in advance. Hope someone can help me.

A:APPCRASH and msvcrt.dll

Sending this to the top after the holiday weekend.

Not sure what else to try other than a fresh install of windows 7 which I really don't want to do.

Do I need to replace msvcrt.dll? How do you do this if I cannot grant myself full permissions?

3 more replies
Answer Match 43.26%

Whenever trying to install a program I get an error message saying "Microsoft Visual C++ Runtime Library

MSVCRT.dll for Win32

Error: MSVCRT.dll is not compatible with Win32s."

Then the installation usually terminates. Any ideas on how to fix it?
 

A:msvcrt.dll error

10 more replies
Answer Match 43.26%

When my window start-up, a window will pop out saying the msvcrt.dll file cannot be located. In addition, when doing a crtl-alt-del, a window will pop out saying 'taskmgr.exe - entry point not found'. I'm not very sure what going on. At times, my IE will also not load the web page, where it just say is connecting to some proxy 65.XXX.XX. Hope someone can help me with this problems. Thanks in advance.

A:msvcrt.dll problem

I see a lot of instances, but no sure cure.What I would do: As a start, run chkdsk /r on the C: partition. Start/Run...type chkdsk /r (with space between k and /) and hit Enter. To answer the query, type Y and hit Enter.Reboot and let it run.System will reboot when chkdsk is completed.I would then check Event Viewer for possible clues to what might be wrong.How To Use Event Viewer - http://www.bleepingcomputer.com/forums/t/40108/how-to-use-event-viewer/ Louis

4 more replies
Answer Match 43.26%

I'm running Windows 2000 Pro and have been getting the following error message recently when attempting to install application software (upgrades to Nero Burning ROM and PC-Cillin)

MSVCRT.DLL for Win32
Error: MSVCRT.DLL is not compatible with Win32s

After this error appears, the install process aborts.

My system appears to be virus-free, and I don't see anything out of the ordinary when running HJT, so I suspect that this file is just corrupted. However, I'm at a loss at how to replace. Booting into SAFE mode is no help as this dll is still in use.

Any suggestions?

A:msvcrt.dll error

Hey tslots. It sounds like those 2 programs are trying to use older versions of msvcrt.dll. What versions of those programs do you currently have and what versions are you trying to upgrade them too?Cheers.OT

9 more replies
Answer Match 43.26%

I am getting the msvcrt.exe error message sometimes when i open internet explorer. I've done a system restore and still have the problem and it is effecting my use of AIM too. PLEASE HELP STAT!!!!!If you have a solution please email me at (email deleted by Moderator) as soon as possible!Thx,ChrisModerator Edit: Emails can be sent using the email button on the members profile. ~ Animal

A:Msvcrt.exe Error

i dont have a solution sorry, but remove email XTina, not good, you'll get spam

5 more replies
Answer Match 43.26%

Hi,

just wondering if anyone has a solution to my problem, up until last night I was using Xp SP3 just fine, until I had to restart my system due to being very slow. So when I got back in to my account I notice I couldn't access Windows Explorer, Internet Explorer, My Computer, Search and Support, Control Panel, or Search. A pop up was coming up saying Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience. I clicked on click here to see what the error report contained and here is what I found:

AppName: explorer.exe
AppVer: 6.0.2900.5512
ModName: msvcrt.dll
ModVer: 7.0.2600.5512
Offset: 00037678

So any ideas or suggestions at what is gone wrong here and how to resolve this issue. Thanks in advance for your help.

A:Problem -- MSVCRT.dll

hi today i got the exact same error, can you suggest a solution?

"AppName: explorer.exe AppVer: 6.0.2900.5512 ModName: msvcrt.dll
ModVer: 7.0.2600.5512 Offset: 00037678 "

the attached file is an error report that was generated for this issue. hope it helps. i don't have the time and the psychological resources to reinstall.

5 more replies
Answer Match 43.26%

Need help to correct dll error: "MSVCRT.dll was loaded but the dll registerserver entry point was not found". The file can not be registered. This problem arouse after uninstalling Zone Alarm Pro due to True Vector Problem and attempting to reinstall ZA Pro. Install shuts down due to error. ZA tech suggests reinstalling Internet Explorer but, when I attemt to do so Windows Update says I have lastest version and throws me out. HELP! Thanks.
 

More replies
Answer Match 42.84%

i'm trying to burn a data cd of a audio book. when i bring up nero and go to the add section , to add a file, it works to let me do that. i add the file i downloaded and want to burn. after i click on the file to add to nero to burn , you have to push next and then after you push that it says "burn". i hit the burn button and it automatically goes to save file. i don't know wtf this is doing. i click save and change the name of the file. it says burning files to disc and shows a bar showing how far the burning process is . the only thing wrong with this , it is really not burning even though it says it is.the disc is not making any noise and is not moving and it still says it is burning. sometimes after i do this whole shebang of saving the file and letting is say it's burning, i go back and select the save file and it lets me burn it. only is not doing it this time. i tried on other files but it still don't work. HELP ME PLEASE

JACK SKRILLA
 

A:nero 8 problems can't burn cd

Make sure where it says 'Which recorder would you like to use?' you have you're CD burner drive selected and not Image Recorder.
 

1 more replies
Answer Match 42.84%

Hi, I recently did pc recovery on my Compaq. I saved my Nero to my external hard drive, but don't know how to put it back onto my C drive so that it works again, with the necessary Windows files on the C drive. can anyone please help?!

A:nero reinstall problems

Hi kingmob1000, it's unlikely you will get it to work again without reinstalling in the conventional way. Nero relies on files that are not just stored in the installation directory, but also files in the Common Files folder and Documents & Settings folders...then on top of that, there are hundreds of registry keys which it relies on. Unless you have backed all of that up, you will have to reinstall from scratch.

Hope that helps.

1 more replies
Answer Match 42.84%

So guys, after a couple centuries of searching the vast land called the "internet" to look for a suitable program that SUCCESSFULLY converts avi files to dvd format, i came across winavi.

So far so great!

So I finished converting the Simpsons movie, and I wanna burn it to a dvd.

I decided to use nero for the first time in my life... pretty simple actually. Looking at internet guides, I pressed "burn dvd" or w/e it said, and clicked on the video_ts folder (containing all the files of my simpsons. this is Nero express 6 by the way.)

attempt one: Went well for like two seconds, and a message saying taht i put in a dvd-r, and that i need dvd-rw dvd+r... i dunno, i think thats what it said. basically, it said that i cant use dvd-r in this driver, but i can use a whole lot of others.

attempt two: I foolishly clicked the X button on attempt one without writing down the names of the 'compatible" dvds. So in order to get that list again, I tried burning again. This time however, a simple message of, BURN PROCESS FAILED AT 16X came up.

So, my questions are...

1. How do I find out what my driver is compatible with? I mean waht type, like dvd-rw

2. I am not sure if I used Nero correctly up to that pont, Cuz i just clicked on the folder (it said so on a guide at afterdawn.com). And then, at the list of the files to be burned, a set of dvd files, not the folder, appeared. Did i do this correctly?
 

A:Help help help... Dvd-r and driver/Nero problems

If The Files Were .bup, .ifo, Then thats right.

Most newer burners support all DVD formats, but if its not accepting DVD-R, try DVD+R.

Theres A Few Formats For DVD Burning (-, +, ROM, DL)

The Format Ur Burner Supports Might Be On The CD Tray Panel.

But If It Said It Didn't Accept -, Then Try +.

Also, Right Click On the VIDEO_TS File And Check Its Size.

The Max DVD Size Is 4.38GB.

In The Past, I Have Gone To Burn Movies And Found The VIDEO_TS Larger Than What U Can Burn.

 

1 more replies
Answer Match 42.84%

Hi ... I'm new and posted a very detailed question but I see now it was under the wrong catagory. I put it under photo I think (this has technical info too for those of you that can check that out if it is relavant). It pertains to a slide show. Basically after a series of 2 problems I got a slideshow done under neros essentials se. But I had problems getting the photos done. I used nero vision...did import and from there they were under home essentials se which I could collect,etc. But after so many it no longer worked and I tried other methods. I eventually used lexmark to scan under my pictures and this worked. But then the last 1-2 pictures didn't show up right away. After doing them over I got it done with 3 songs in the background. When I burned it it cameout as data as what I understand to be a backup file. How do I get that to a cd that plays on a dvd player? Or how do I get it do a dvd and which type of blank disc do you recommend? Also is scanning photos working/not working common? And BTW I left out I did try "settings" nuder nero 7 SE and the only thing it does under cd's is data. Thanks...I could use the help you have.
 

More replies
Answer Match 42.84%

Hi, I have created a photo/slideshow DVD with audio files. When I burn the DVD and play it the audio files are real faint in the background. I cannot find any settings to change this. I have tried to use different audio compression settings and that did not seem to make a difference. It does not seem to be a problem if I burn a movie, it turns out fine. There must be a setting somewhere that I am missing. Please help if you have any ideas, thanks!
 

More replies
Answer Match 42.84%

Hi.
I used the Windows Media Player to archive my music library. I want to be able to now pull that music and burn to cd using Nero.
The problem seems to be incompatible formats. Nero cannot read the files as they sit on my hard drive. They must be converted from windows media file to .wav file. Can this be done?


Also, I noticed some inconsistentcies with how XP stored and labled albums that were downloaded on different days. All of the albums are placed in a folder labeled unknown artists. Once I go online and run Media Player each album is named and labeled and I get a nice thumbnail depicting the album cover. Now though all I get is the thumbnail. The folder remains labeled as unknown artists. The artist's and album's name do show up at the top of media player; just not the folder that sits in 'my documents' and 'my music'.


The reason that I like to use Nero instead of Media Player is that all the tracks you drag and drop take up space on their progress bar so you know exactly where you stand spacewise.


So how do I use Nero to burn these folders and why won't XP name my downloaded albums properly anymore?
 

A:Problems with Nero Burning Rom

You can use Winamp 2.xx's Diskwriter output plugin to convert many things to *.wavs. I suggested this in a thread somewhere and someone said that there can be some problems with doing it this way or something, although before I knew nero could deal with *.mp3s I always did it this way.
As far as why your naming problem, I don't know on that one.
 

11 more replies
Answer Match 42.84%

Hey,

I previously had Nero Express OEM installed on my computer. I then got myself a copy of Nero Ultra Edition, which includes Nero Burning ROM in it, However, the Nero Burning ROM gives me an error when I try to access the Nero Burnin ROM even though everything else in Nero Ultra works fine.

The error that is generated is the following:

Error signature
AppName: nero.exe AppVer: 7.0.0.0 ModName: bcgcbpro730.dll
ModVer: 7.30.0.0 Offset: 0011d51b
Thank you,
Goku

A:Problems With Nero Express

This seems to be a very common problem with Nero, very common.There were several solutions offered.Some worked for some people, while other solutions worked for others.You can have a look at these links and see if one of the solutions offered, will work for you.http://forums.afterdawn.com/thread_view.cfm/246263http://www.htmlforums.com/showthread.php?t=68121http://forum.mininova.org/index.php?showtopic=8887http://forums.afterdawn.com/thread_view.cfm/242590http://forums.techguy.org/all-other-software/450785-nero-7-premium.htmlhttp://forums.whirlpool.net.au/forum-replies-archive.cfm/474387.htmlWARNING:One solution offered was a Registry edit.If you're not comfortable with working in the registry, DO NOT ATTEMPT.Improper changes to the registry could render your computer inoperable.Remember to backup the registry before making any changes.Instructions, on how to do that, can be found here:How to back up, edit, and restore the registry

1 more replies
Answer Match 42.84%

Hi...I've done backups before with Nero (Trial edition) before, but lately, I tried to do one and after about 30 minutes of running, Nero says that my backup is not successful. I think I'm doing everything properly.
The only thing that is different about the latest backup attempt is that I am using a CD- RW disk. Could this be a problem? Any suggestions? Thanks.
 

A:Nero Backup Problems

13 more replies
Answer Match 42.84%

Hey all, when i burn Dvd's using files on my computer i recorded off of tivo the lip sync is all out of whack. The files on my comp play fine, its just when i burn them to DVD's. Is there anyway to fix this. Tivo records them in mpeg files. Thanks
 

More replies
Answer Match 42.84%

Up until now I've had no problems burning video files onto DVD-Rs through Nero 6. However recently, without any sort of warning or reason, DVD-R burns have all started to fail. It would get to around half or so of burning progress before it would suddenly say the error message 'Error reading data', 'Writing short-lead cop out', and the burning process failing. I thought it may have been just the videos I was attempting to burn, but I just finished an attempt with another set and those have failed as well. I fail to understand why Nero would burn DVD-Rs with no incident whatsoever but suddenly fail every attempted process as of only a week or so ago.

Any help would be greatly appreciated! Here's a saved log file from one of the failed burning sessions a day or two ago, maybe it'll help things out:

Owner

1A20-0318-0000-2350-9239-9175

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <_NEC DVD_RW ND-6750A> Version: 2.01 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <BE0755Z DER014M >Version: 1.0 - HA 2 TA 0 - 6.6.0.13
Adapt... Read more

A:Problems DVD burning in Nero 6

Your DVD drive unable to read the DVD accurately or the file is corrupted. Do you set your burning speed to maximum? I suggest to set the burning speed at a lower rate around 4X up to 8X then check if the burning is successful.
 

2 more replies
Answer Match 42.84%

yeah so i have Nero Burning Rom version 5. And every time i close the program next time i try to run it it just plain wont burn. It always fails. Then i gotta reinstall Nero and restart my computer and ive gotten really tired of it. Any suggestions?
 

A:[SOLVED] problems with Nero 5

7 more replies
Answer Match 42.84%

yea i wanted to know if nero worked on xp its a burning program that i have but i went from me to xp and now it wont work...can some one help me
 

A:problems with Ahead nero and xp

6 more replies
Answer Match 42.84%

Hi all,

Im new here .. so please be kind :]

ok .. im having major problems with installing nero.

I cant install ANY version of nero

I get 2 dll files error (with all versions) :
Cannot create Common Files\AudioPlugins\mp3PRO_hlp.dll
Cannot create Nero\NeMP3Hlp.dll

I had nero installed before this .. but i just bought a BENQ dw1620 DVD writer .. and tried installing the NERO version came along .. but since thn i cant install any version of nero.

I tried reading previous threads .. but no one found the solution (or if they found they dint shared)

Please please please help me.

I know this is one of the most active section on the forums .. so i hope someone from this huge community & from many countries can help me.

Thanks in advance :)

A:Problems installing NERO !!

un install nero, then use a registry cleaner.
re install nero again.

grtzz RonTim

5 more replies
Answer Match 42.84%

Hello,

I was told it would be easier to converse on this issue if I started a new thread instead of using someone elses, so I have. I wasn't sure whether to put this in the software or hardware forum, but I decided here in the end.

Here is the background information:

WINXP Home (fully updated)
Pioneer DVD-RW DVR-105 Drive
Using Staple Cheap Media and Sony media as well

I use my burner to make both audio cdrs and data cdrs (avi's from my harddrive). Up until three days ago, both of these processes worked very smoothly on my PC with Nero 5.5.9.0. Then three days ago as I was attempting to burn an avi to a data disk, I suffered two consecutive buffer underuns. I didn't think this was much of an issue because after examning the file, it appears that it was missing some bytes of data at the end and was therefore corrupt.

Fast forward to the next day... I then proceeded to burn other data disks, and according to all observations of the burning procedure, it went by smoothly. When I went to check the disk afterwards, I popped it into both drives and came away with a "Drive:\ is not accessible, incorrect function" error. This happened repeatedly with every data disk I burned afterwards utilizing Nero. A data disk burned with the native XP burning capabilities also failed to work in the same exact manner. I then tried burning an AUDIO cdr, and these actually work without a hitch. My stereo and computer can read the finished product flawlessly. The dvd-rw... Read more

A:dvd-rw/nero burning problems

14 more replies
Answer Match 42.84%

Hi, I've just encountered a problem with my cd-rw and nero which just sprang up in the last couple of day....

I have a Yamaha CRW8424E and I'm using nero, and the last 3 disks I've tried to burn in a row have failed...

I've turned on simulation and that works fine, then when its towards the end of burning the cd I get an error message about "Session Closed, CD not fixated"

I haven't made any hardware changes since the last disk that burned successfully, and I've tried burning a few different files, so I'm at a loss as to what's gone wrong.

Any help appreciated,

MrT
 

A:yamaha cd-rw & nero problems

7 more replies
Answer Match 42.84%

hello everyone!
well, im having problems with nero backitup. I did my backup and everything, the thing is that it is not recognizing a cd and the NB.txt shows the same cd id as the program. I realized that i can recover the file manually, I was wondering if there's a faster way to do it manually, if not, how can I fix this problem?

thank you for your patience.
 

A:Nero BackItUp problems...

Welcome to Techspot!
Dan... Take a little more time and be specific with your description. When you use pronouns to refer to items there is noway to follow your problem.
What is NB.txt? Backitup does not save files as .txt .
Also Backitup does not recognize " a CD" . Do you mean Nero is not recognizing the CD back up media or the CD writer(ROM)
Does the other programs in Nero recognize your CD drives?
You can use the InfoTool in Nero to confirm the writer and check to see if your ASPI layer is installed correctly.
"Recover the file manually.... more quickly" ?????????
What exactly is the process you are referring to?
 

4 more replies
Answer Match 42.84%

Suddenly, I cannot make cds or dvds using Nero 6. I've updated Nero and then reinstalled the original version with no solution. I cannot burn cds or dvds on the 'first pass', but sometimes can after several tries. Could spyware be interfering? Here's my HiJack This log:

Logfile of HijackThis v1.99.1
Scan saved at 8:38:08 AM, on 9/20/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\Executive Software\DiskeeperServer\DKService.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\IWP\NPFMntor.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\slserv.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Java\jre1.5.0... Read more

A:Nero Problems-can't use cd and dvd functions

It's probably a driver/software issue...

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should 'not' have any open browsers when you are following the procedures below.

Before you do anything else, please create a folder for HijackThis and put it in a permanent folder (like C:\HJT) instead of the Temp folder. This is required because HijackThis will create backups and we don't want them to be deleted.

Go to My Computer->Tools->Folder Options->View tab:
* Under the Hidden files and folders heading, select Show hidden files and folders.
* Uncheck the Hide protected operating system files (recommended) option.
* Click Yes to confirm and then click OK.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Make sure you downloaded, installed, updated and ran these programs (run in Safe Mode) already - Ad-aware, Spybot and Ewido. If you didn't, do them now. For more information, go to http://www.greyknight17.com/spyware.htm

Restart your computer and boot into Safe Mode by hitting the F8 key repeatedly until a menu shows up (a... Read more

10 more replies
Answer Match 42.84%

Well i have done a WAYY overdue format on my computer and earlier backed up some data with NERO BackItup tool.

here is my problem:

i have reinstalled NERO and for some reason i do not have the EXPERT MODE option anymore, nor do i have the BackItup tool, in fact my whole NERO seems to be missing all sorts of options, i dont have the AUDIO RECORDER, AUDIO ENCODE, AUDIO EDITOR when clearly i had these before my reinstall.
so i try to open the backups from the disk, and the file is reconised as a NERO BACKUP, i click on it and yet strangely get this message:
and from here on i have no idea what to do, i have all my important documents on my disk and and cannot open them back onto my computer.

any help at all would be great!
 

A:NERO BackItup Problems

Looks like you've installed an older or basic oem version of Nero to the one you ended up with. Is your Nero version 6?
If it is, get the last version of 6 for free from their website.

http://www.nero.com/nero6/eng/nero-up.php
 

3 more replies
Answer Match 42.84%

I recently installed Nero 5.5 on my boys computer and have two problems. First,after opening the prog once and closing it,I cannot reopen it. No error messages,simply no execution. And secondly,after using the prog,I cannot log off (four accounts on the computer),restart,or shut down. I have to do a hard shut down,which I don't like to do but have no choice. Even tried ctl,alt,del and tried to shut down from there but to no avail. The computer has been recently formatted and everything else is working fine. This same prog was installed on it before the format and it worked fine.
Computer stats are:
Dell 8100
Win XP Home SP2
1.4 Ghz P4
1.25 Gb RAM
WD 120 Gb HD
Sound Blaster Live 5.1
GeForce2 Ultra
AVG Antivirus
By the way,so there is no confusion,this program was bought and paid for.It came bundled with a Maddog CDRW.
Any help would be greatly appreciated. If you need any more info,please let me know. THX.......
 

A:Solved: Nero Problems

16 more replies
Answer Match 42.84%

Hi
I have the NERO 5.5.3.2 and am having problems burning cds.

The cd will burn up to 75% of the disk then it stops.

I have Windows 98 and a compaq presario

thanks
 

A:Nero Burning Problems

6 more replies
Answer Match 42.84%

Hey, I downloaded an episode of the Daily Show and didn't realize that it was in wmv format and kinda fishy. Anyways now I have malware and it's preventing me from going to the spybot search and destroy website. Additionally it has removed my burning rights in Nero.

I ran Avria and it has detected:

dr/mywebsearch.1793776
TR/CryptRedol.73216.1 Trojan
TR/Agent.201493 Trojan

My Hijackthis log is attached.
 

More replies