Tech Problem Aggregator

WMP Rip and Library Paths Don't Stick

Q: WMP Rip and Library Paths Don't Stick

Hi,
We are stuck for the time being using Window Media Player to Rip/Burn/Sync music with. I've set the paths for the ripped music and library to go to a separate partition/drive, but each time the system is reset, WMP resets the paths back to c:\documents\ etc........
Should this be the way things work?
Thanks for your time,
patmac

A: WMP Rip and Library Paths Don't Stick

6 more replies
Answer Match 68.04%

I am going through the library to make sure the files it contains are all in the correct folders. I have set Explorer to show full paths, yet when I open the library the file names are still shown as before.

Is there any way the full path can be made imediately visible without need to go to Properties?

It would make the process much quicker.

A:Documents Library: show full paths

  
Quote: Originally Posted by rundwald


when I open the library the file names are still shown as before.


Hi,

I'm not sure I understand your question. Can you post an image to show us what you mean by "shown as before"?

Regards,
Golden

5 more replies
Answer Match 54.6%

I guess this may be a tiny bit off the subject here, but I am attempting this in windows 7.

I have a program file manager tool called 'Directory Opus' that is capable of calling windows external programs and passing them the current directory the file manager is sitting on.

So far so good.

Now I want to call a cygwin (linux/unix emulator for windows) terminal with that file manager.

Checking properties on the cygwin Icon I got the path: C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico -

So it is a path to a command and an argument to that command.

Actually I guess it is 2 arguments to a command since I think '-' in that position means to feed anything on STDIN to the command. At least that would be true in unix shell programming.

So using the Directory opus setup I pass this call:
'@async:C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico - <and here add {s}>'

So the call ends up:
'@async:C:\cygwin\bin\mintty.exe -i /Cygwin-Terminal.ico - {s}'

That call does just what it is supposed to. It passed the current file absolute address however cygwin terminal does not understand the windows path notation. If I were passing it: C:\subdir\blah\ It would just say 'No such file' Cygwin terminal wants to see /cygdrive/c/subdir/blah Or at least I think that is what is happing.

So to cut to the chase.... I'd like to put a little wrapper to Cygwin terminal in there with the code necessary to convert 'C:\subdir\blah\' to '/cygdrive/c/subdir/blah/'

But, I do not know how ... Read more

A:Dos paths and unix paths conversion

I would ask on DonationCoder.com specifically this forum:
General Software Discussion - DonationCoder.com

The reason is I know there are a bunch of DO aficionados, who also use Linux, on that forum. I've never tried DO myself. I have played around with CygWin. But it's been a few years.

If the site wants a donation to sign up just explain to Mouser why you want to post etc.. I think he'll be sympathetic.

3 more replies
Answer Match 52.08%

How would I copy my saved photos on memory stick to the computer's photo "Library"? I see a "send to", but I don't want to lose the copies on the mem stick. Thanks.

A:Copying photos from mem stick to "Library" on computer.

Open the relevant library folder, then open the flash drive in a new window. Select all of the files you want to copy (or do them one at a time if you like) then right click and hold, drag to the library folder, release right click and choose 'Copy here'.

Example below, substitute 'Gav's Pictures' for your flash drive and my F: drive as your destination library folder.

3 more replies
Answer Match 44.52%

Lenovo is the latest PC maker to join the budding PC-on-a-stick movement. The company on Tuesday announced the Ideacentre Stick 300, a wallet-friendly compute stick suitable for use in multiple scenarios.

Read more
 

A:Lenovo undercuts Intel's Compute Stick with cheaper Ideacentre Stick 300

It's too bad HDMI couldn't supply the power.
 

7 more replies
Answer Match 44.1%

Hiya

The Picture It! Library and Digital Image Library do not display temporary files. By ignoring temporary files, the Library can remain clean and uncluttered. An issue has been identified where some software marks photos as temporary files when they are acquired from the camera. This patch enables the Library to view these temporary files.

The software currently known to mark new files as temporary is Canon Utilities ZoomBrowser version 4.1.0.46.

System Requirements
Supported Operating Systems: Windows 2000, Windows 98, Windows ME, Windows XP

Multimedia PC with Pentium 500 MHz or higher processor
128 MB of RAM

http://www.microsoft.com/downloads/...e5-5d09-4bbf-b7df-b1451f201dae&DisplayLang=en

Regards

eddie
 

A:Picture It! Library/Digital Image Library: View Temporary Files Patch: Aug 26

7 more replies
Answer Match 44.1%

Anyone know of a netbook (small laptop) that has a pointing stick / trackpoint like IBM has on most of their regular sized notebooks?

I love the trackpoints to the point that i wont buy a notebook without one.
The touchpad only option is so 1990's

Id love to get a ASUS eee, but there's no way ill by one, or a similar netbook that dont have a trackpoint.

Other names the keyboard mouse trackpoint goes by for tagging / searching purposes:

TrackPoint
PointStick
NX Point
Pointing
StickPoint
QuickPoint
Track Stick
AccuPoint
FineTrack
Mouse emulator
Pointing Stick

Thanks for looking.
Any and all suggestions are greatly appreciated.
 

More replies
Answer Match 44.1%

Hello People

I've searched for hours now with google but I didn't find anything useful about either how a Trackpoint works or how one of these can be repaired.

I'm doing this because I want to get my old Compaq LTE5300 working neatly again. It's not as useful as a laptop rightnow because of a broken trackpoint and a broken battery. I've already found a tutorial how to get NiCd and NiMh Batteries working again. Going to try that tomorrow.
Well, there's another possibility for getting a TrackPoint to that old Compaq:
I've got a broken Toshiba with Trackpoint as well (Motherboard or Screen or both gone). That Trackpoint works well with the Compaq. Only problem is that I can't use the connectors to put that Trackpoint anywhere outside the case. Question: How do I prolong foil wrapped cables?

Maybe I'm writing a bit confused, but that's only because it's late here in CH.

Greetings Hans
 

More replies
Answer Match 44.1%

A year ago, I created a custom Library and have been using it successfully until the beginning of this week (11/7/2011).

The library's folder location is similar to the following:
C:\Users\USERNAME\FOLDERX

Now, when I open the Library, it shows a listing of all of the files found within all of the folders in that library; that is, imagine a book separated by chapters (folders), and now all of the pages are scattered (files) in one cardboard box.

On the top right of this Library window, I have the following "Arrange by" options:
-Date modified
-Tag
-Type
-Name
----
-Clear Changes

On the "working" libraries, such as 'Documents,' there is a "Arrange by Folder" option, which is what I am attempting to have the custom Library emulate.

I have deleted the custom Library and tried to reestablish it, but the same issue persists: I cannot sort the Library by folder, rendering it useless.

Is there anyway to have the "Arrange by Folder" option reappear?
Did I accidentally switch some setting, or is this due to a Windows Update?

Thank you.

A:Library Conundrum: 'Arrange By Folders' is Missing in Custom Library!

Did you create a new library with the same name or a different name? When you go to Libraries, and you right click and select properties on Documents, do the attributes match what you find when you right click and select properties on your new library?

1 more replies
Answer Match 43.68%

Try to create new library.
Get "Unable to create the file "New Library.library.ms" Access is denied.

Found:
"Unable to create the file 'New Library.library-ms' File System error (16389)

The error 16389 (0x4005) is a trucation of a E_FAIL error (0x80004005)."

New library commands raise an error 16389 when "Prevent users from adding files to the root of their Users Files folder" policy is enabled | Microsoft Connect
"Unable to create the file 'New Library.library-ms' File System error (16389)

The error 16389 (0x4005) is a trucation of a E_FAIL error (0x80004005)."

http://connect.microsoft.com/Windows...icy-is-enabled

http://snipurl.com/uvm5h
Recently transferred files from C:\Users\Ray to E:\My Documents.--used MS move command, thought it would transfer references, apparently not.

What should I do to be able to create a new library?

A:Unable to create the file "New Library.library.ms

Run "cmd". Type "SFC /scannow" (without quotes), hit enter.
Also check the event viewer for errors related to "16389".

6 more replies
Answer Match 43.68%

I am using windows and have all my itunes on an external home network drive. Everything is all set up and all new files are written to the drive. The problem is that if I add music from a cd to the library it is only recognized by the computer that I did it on and not recognised by the other computer. How do I make both computers recognize all content in the library?

Thanks, Joe
 

A:Solved: library on external drive using 2 computers I can't see all the library

No takers eh! I guess there are not many itunes users here?
 

1 more replies
Answer Match 43.26%

I am just starting out learning Windows 7. I am reading an ebook by Mclean and Thomas titled ?Configuring Windows 7?

In chapter 1 regarding installing Windows 7 using a USB source, the procedure to prepare the USB device is as follows:

1. Connect the USB storage device to a computer running Windows 7 or Windows Vista.
Ensure that the storage device has no data stored on it that you want to keep (or that
you have moved such data to another storage device) because this procedure removes
all existing data.
2. Open an elevated command prompt and type diskpart.
3. At the DISKPART> prompt, type list disk. Identify which disk connected to the
computer
represents the USB storage device.
4. At the DISKPART> prompt, type select disk X where X is the number of the disk that
you have identified as the USB storage device.
5. At the DISKPART> prompt, type clean. When the disk is clean, type create partition
primary.
6. At the DISKPART> prompt, type format fs=fat32 quick. When the format is completed
type active and then exit.
7. After you have completed these steps, copy all the files located on the Windows 7
installation DVD to the USB storage device.
8. Configure the BIOS computer on which you want to install Windows 7 to boot from
the USB storage device. Attach the USB storage device and then reboot the computer
to start installation.

QUESTION 1
Why do you need to go through the above rigmarole when you can just go to My Computer, right click the USB drive, format foll... Read more

A:Windows 7 installation from USB stick now USB stick not working?!

Try method two in this tutorial:
USB Windows 7 Installation Key Drive - Create

2 more replies
Answer Match 42.84%

I have Musicmatch Jukebox 10. I used to have 9.0 and I have a saved library (.ddf file) in my external hard drive. After getting 10.0 the library is now not saving to any .ddf file (that I know of). I have searched all my drives for all .ddf files and produced nothing. My original .ddf file I saved all the time when adding new music has been the same...4.3mb since i upgraded to 10.0. the .ddf file isn't getting any bigger. I have tried deleting mmjb from my entire computer, and going to the C: directory and physically deleting musicmatch. When I download a fresh copy, I still cant save or create a new library. In addition, it still pulls up all my music...which is stored in my external hard drive. Even if I turn my external hard drive off...mmjb still brings up all the music...of course it wont play because the hard drive is turned off but somehow mmjb knows my current library...so is it storing it in a file which is not a .ddf file? There is no option to "new library" or "save library" Someone help me!
 

A:MMJB 10: No option to save library or new library

It might be that the file is hidden and windows cannot see it. Go to My Computer, then Tools > Folder Options > View > select shown hidden files and folders.

Also it could be that it's not using the DDF file anymore and using a different one. Maybe M4U or something similar.
 

2 more replies
Answer Match 42.84%

Hello

We have a GPO setting "Prevent users from adding files to the root of their Users Files folder" as we do not want users to be able to add files to their Roaming User Profile.

This GPO causes an error when a New Library is attempted to be created.

Because of the error we would like to Remove the "New Library" button from the toolbar which appears when the Library item is selected in the navigation pane.

The following article is great, however I cannot find a reference to the "New Library" button.

Windows Explorer Toolbar Buttons - Customize

Could any customisation wizkids offer any advice please?

Many Thanks

A:Remove New Library Button in from Library Toolbar

Hello Lee,

Doing step 7 in the tutorial below to remove "New -> Library" from the context menu will not remove the "New Library" toolbar button, but it will also effectively disable it. It may be a good workaround for you.

New Context Menu - Remove & Restore Default Menu Items

Hope this helps,
Shawn

3 more replies
Answer Match 42.84%

For some reason if I go to the libraries where is has Documents, Music, Pictures and Video I cannot open anything it just says LIBRARY-MS File. I can access the folders if I click on computer, C drive, users etc. I have tried deleting the -MS files right clicking on Libraries and clicking Restore Default Libraries I have also tried making a new user account, adding folder to libraries, even reinstalled Windows 8. Any suggestions?

A:cannot access Library folders keep getting LIBRARY-MS File

Did you first set up a Homegroup with the other machines in your network?

I don't believe the Library folders will function unless a Homegroup has been set up.

The Homegroup trouble shooting guide will show you how to fix most Homegroup related problems.

Ultimate Troubleshooting Guide for Windows 7 HomeGroup Connection Issues

4 more replies
Answer Match 42.84%

My libraries file, Documents, Music, Pictures, Videos had developed a problem.

When I click on Pictures, the picture folders appear, but immediately below, my document files appear as folders also.

If I delete a document file in the pictures file, the document also deletes in the documents file.

If I try to move the document file from the picture file to the document file, a window says its an Identical sub folder and won't go any further.

How can I remove the folder list of documents from the picture file without destroying those documents in the document file?

I think that this problem developed as I loaded an ArcSoft program to read slides into my computer.

Thanks,

Jimbow

A:Documents Library also Appears in Pictures Library

Hello Jimbow, and welcome to Seven Forums.

If it's just been added to your Pictures library by mistake, then you should be able to use the tutorial below to remove it from the library without deleting the actual folder.

Library - Remove a Included Folder

Hope this helps,
Shawn

3 more replies
Answer Match 42.84%

Apologies if I'm on the wrong board, but hoping for advice on rebuilding my iTunes library without a full library.xml or .itl. (I'm on Windows 7 64bit, iTunes 12.1.1.4)
 
My tech skills are poor and after a corrupted library event I just reinstalled itunes, and then added my itunes folder from my C drive in itunes (File> Add Folder To Library). However, not all the songs on the HD were added to my iTunes library i.e. for many albums random tracks were missing when viewed in iTunes (the original .xml and .itl files were corrupted and I didn't try to use them for this).
 
I can go to the iTunes folder on the C drive and right-click to Open those missing files with iTunes. After they have been played like that then they are visible in the library in itunes, but doing that with every individual missing track is incredibly time-consuming.
 
I've just bought a new PC and want to port my whole library over to the new machine. Is there any way of moving all the files to the new machine via external HD and then rebuilding the library *without gaps* even if the library.xml and .itl files from the old machine have gaps?
 
Any suggestions would be really appreciated, or somewhere else to go to find help. Many thanks.

More replies
Answer Match 42.84%

I don't know whats going on but if I go to options and click on Monitor Folders and find my folder where all of my music is located.

WMP11 finds all 24002 files but says "0" added when completed. I basically have no library and I'm not able to add the files to the library.

I've restarted my computer, I've deleted the watched folders and added them back without any luck.
 

A:WMP11 finds my song library but won't add it in the library?

First turn off Monitor Folders and leave WMP open in the library view. To add songs to the library, select the music file folder(s) in Windows Explorer then drag-and-drop them into the WMP window.

If that doesn't work, delete the WMP database http://support.microsoft.com/kb/925718 and try again.
 

1 more replies
Answer Match 42.84%

For some reason if I go to the libraries where is has Documents, Music, Pictures and Video I cannot open anything it just says LIBRARY-MS File. I can access the folders if I click on computer, C drive, users etc. I have tried deleting the -MS files right clicking on Libraries and clicking Restore Default Libraries I have also tried making a new user account, adding folder to libraries, even reinstalled Windows 8. Any suggestions?

A:cannot access Library folders keep getting LIBRARY-MS File

Did you first set up a Homegroup with the other machines in your network?

I don't believe the Library folders will function unless a Homegroup has been set up.

The Homegroup trouble shooting guide will show you how to fix most Homegroup related problems.

Ultimate Troubleshooting Guide for Windows 7 HomeGroup Connection Issues

4 more replies
Answer Match 42.84%

EDIT: This issue has been solved.

Hi there! This problem is slowly driving me crazy, and I'd appreciate anyone's insights.

My default Pictures library has somehow become a permanent clone of my Videos library. It's not that it's a copy of Videos, it's that both libraries have merged into the same entity. The "Pictures.library-ms" file literally does not exist; Windows is using one file and one set of options, yet displaying it as if there were two libraries. And it stubbornly refuses to acknowledge that "Pictures" can or should exist.


If I delete one of the "Videos," both links remain visible until I refresh the Explorer window, which makes them both disappear. If I try to delete one and then the other, Windows says it can't find the file (which makes sense, since the individual "Videos.library-ms" file is already gone).

If I delete all of my libraries and then select "Restore default libraries," both duplicates reappear as before. No "Pictures.library-ms" is ever created. I can manually create a new library called "Pictures," but it doesn't affect the presence of the duplicate Videos, and other applications, such as Windows Media Player, do not recognize it as the official Pictures library. (WMP only shows images in the Videos folders, and if I select "Manage Pictures library" from the WMP navigation pane, it opens the options for the Videos library.)

St... Read more

A:Solved: My Videos Library Ate My Pictures Library

8 more replies
Answer Match 41.58%

I have 2 Corsiar vs512mb400 sticks of ram

and i want to add another one...............

but when i stick the Vs1gb400c3 in that i bought it does not work

It still tells me i only have 1 gig

For sum reason mixing them around does not help the preoblem eather

and Yes iv tryed to just put the 1 gig stick in, and it works fine

Its like the 2 sticks just cancel the big one out all together
No my Ram is not doulbe sided

here r the web http://www.dealtime.com/xPF-Corsair_...RAM_VS512MB400 THIS Is the 512 Sticks i have (2 OFthem)
And The 1 Gig stick i have http://www99.shopping.com/xPF-Corsai..._Free_2nd_Day_
I dont belive they r doulbe sided and my mother board says that it can hold 2gigs of 400mz Ram
 

A:2 Stick of Ram, Cancel Out the 1gig stick

6 more replies
Answer Match 41.16%

I would like to add the games library into the main library system that includes: Videos, Music, Documents, Pictures, Podcasts, ect. How could I do this?

A:Is there a way to add games library to main library?

Correct me if I'm wrong because I have really never used the "Games" Interface but I think it's a part of the system as in like not a folder.

6 more replies
Answer Match 40.74%
Q: Paths

Quote:




Sounds like your PATHS are wrong ?



This is always fun.



You need to ?locate? the nmake.exe and ensure that the path to this file eg, c:\myfiles\nmake.exe is listed in PATH




This is something someone told me i needed to do to finish compiling a program (anope IRC services)

Frankly I'm rather new to all of this and have no clue exactlly what to do

Any help would be greatly appreciated

A:Paths

This page has the full instructions for building Anope for Windows

4 more replies
Answer Match 40.32%

Hello, I know (am pretty sure >.<) that there is a way to do this.

I am trying to set a file path for a folder, but I need the folder to go to the current username, instead of my username. For example..

C:\Users\Matt\Documents\ - Is my current path

I want it to be C:\Users\*THEIR USER NAME*\Documents\

A:Help With File Paths

Hello Anyok,

You can use the path below for a universal profile path instead.

%USERPROFILE%\My Documents

Hope this helps,
Shawn

3 more replies
Answer Match 40.32%

Applications won't run because the paths can't be found but the files and folders all exist

More replies
Answer Match 40.32%

I did not know which forum to post in for my problem. Sorry if this is the wrong one.


I recently tried to relocate my data folders and something went wrong. When I was done I had dble folders. This is a picture of the results.
Attachment 171583

I moved them back to it's original place. I want to be able to move them a separate partician. I know that the problem has something to do with paths being incorrect.

When I click on the start menu and on my username icon it opens up my real user folders and not Libraries. I wonder if this is a clue. I have returned the start menu customizations to default and it still opens my user folders. Can someone help me figure this out?

Thanks.

A:Need to fix folder Paths.

Hi ariel5345

Have a look at this - Start Menu User Folder Buttons - Open to Users Instead of Libraries The second set of .reg files will reset your start menu open locations.

This should help put your user folders back to their default location - User Folders - Restore Default Location

Follow this excellent tutorial to help move your user folders successfully - User Folders - Change Default Location

Post back with any questions

Danny

6 more replies
Answer Match 40.32%

Im new to windows 10, i upgraded from windows 7. I am beyong annoyed with the File looking for is here, there, in that folder and dont forget the folder under it lol. I sync my phone to pc for Dropbox, Files starts to sync and im seeing the same file syncing over and over like 4 times, along with the annoying windows sounds each time. I look to see where they are going and one goes to a folder
Same file here
This PC-Windows C-users Branscum-dropbox

same file went here
Network-THEBRANSCUMS201-Users-Branscum-Dropbox
and here
C-users-craig and lisa-Dropbox

i could go on but im confusing my self even more...Please i dont need all them access points for the same file ...Could some one explain this to me
 

More replies
Answer Match 40.32%

I am trying to show a friend how to use a used computer he purchased recently. I have done some exploring in his files and folders. My experience is limited to XP only; so some things look different to me. I found this path: C:\Users\username\AppData\Local\Temp\services.exe which seems odd. Is a temp folder where Vista would place services.exe, or does this indicate a problem?

Thanks for your replies,
welf
 

A:vista paths

6 more replies
Answer Match 40.32%

http://www.mediafire.com/?hlnmttzzyrg

I am using Parallels running Windows XP.
I try opening the run.bat file from there but it appears and disappears in a second. I managed to click it like crazy and see what it says. "UNC paths are not supported." I also opened CMD and dragged the run.bat file over into it. This is that I got...

Any help would be much appreciated.
 

A:UNC paths are not supported

I've posted this on 10 sites and all I got are witty remarks. People are just dumb these days....
 

2 more replies
Answer Match 40.32%

All,

Looking for a way to add a single file to an existing .ZIP file, but need to specify the path within the existing file structure.

Example - I ZIP a directory and it's subs with all of their files. It has about 6 different subs and each of them have up to 10 subs of their own.
C:\WEBSHARE\WWWROOT\PE\SUB1\file1.asp

I need to add 1 single file and tell it that the path I want it to go to is:
C:\WEBSHARE\WWWROOT\PE\SUB1\file2.asp

BUT - the file is not coming from the same directory on the system being used to create the ZIP.

Please help.

Thanks,
Shaun
 

A:WinZip paths

6 more replies
Answer Match 40.32%

Hey:

I'm trying to enter a registry value. However, the place to enter it is dimmed:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\

When I right click App Paths "New" appears and should allow me to left click on "Key". However, "Key" is dimmed so I cannot select it.

I am the admin and logged in as such. I have XP Pro SP3 installed.

How do I make "Key" available?

Thx

A:How to make xp app paths key available

Sounds like a permissions issue of some kind.

Right click App Paths then click Permissions
Administrators and System should have Full Control and Read access, Power Users should have Read and Special, and Users should have Read access. Creator Owner should have Special. These should all be greyed out, meaning they are inherited.

4 more replies
Answer Match 40.32%

http://www.mediafire.com/?hlnmttzzyrg

I am using Parallels running Windows XP.
I try opening the run.bat file from there but it appears and disappears in a second. I managed to click it like crazy and see what it says. "UNC paths are not supported." I also opened CMD and dragged the run.bat file over into it. This is that I got...

Any help would be much appreciated.
 

A:UNC paths are not supported

7 more replies
Answer Match 40.32%

there two windows xp professionals installe dmy pc .
How can I delete the second?

A:Boot Paths

Go to Start/Run and type msconfig go to the Boot.ini tab click Check All Boot Paths

2 more replies
Answer Match 40.32%

I was just wondering if there were a way to change the default cookie path in XP to another location; for example, my RamDrive...Thanks for any help! peace,
ian
 

A:XP Cookies and Paths

6 more replies
Answer Match 40.32%

I'm writing a batch file which calls a 32 bit .exe program. I want it to be compatible with the different Windows operating systems. The problem is that the path to "Program Files" is different depending which OS is being used. For instance:

I know the paths for these OS' since I use them:
- WinXP 32 bit: C:\Program Files\
- Vista 64 bit: C:\Program Files (x86)\

Could some kind souls please tell me what the 32bit paths are for:
- WinXP 64 bit:
- Vista 32 bit:

And for Windows 7 also would be nice:
- Win7 32 bit:
- Win7 64 bit:

Thanks!
Sky

A:Need help with paths in XP and Vista.

Environment variable - Wikipedia, the free encyclopedia

Look down in the section called "system path variable" for %ProgramFiles%.

Some other good stuff on that page as well.


Gil

6 more replies
Answer Match 40.32%

Is it possib to delete the shared document and libraries from my Seven ? Or will windows keep generating new ones at each boot ? Can I stop windows from doing this ? or have i have to live with this ?


PC-specs

Packard Bell Imedia
q8400
4 gb ram

etc


VV

A:Paths , Librabries ?

You need to remember that library's only point to the actual file somewhere on the network or on your own machine in the "user" files. If you need to delate something from the library you should delate the file from the actual source "my pictures" My documents" "my music".

But there is a way to make it work like you want.

Just go into Windows Media Player, choose the "organize" tab then "options" then choose the Library tab and set it to "delate files from the computer when delated from the Library. Although I believe that only works if you are delating files from Library of the machine that contains the source files.

That should allow for delating from the Library, but only from the machine that the files reside on, I don't believe it will work accross the network. It think it still works best if you delate from the file source instead of the Library.

1 more replies
Answer Match 40.32%

Hi,

I recently had to get rid of of my slave harddrive, and therefore had to reinstall a few programs:

A problem occurs when i try to setup software using setup files that worked perfectly before:

---- 1607:Unable to install InstallShield Scripting Runtime.

I check this out on net. Download the required isscript.msi, which should automatically install the required installshield again. But then i get it automatically pointing towards my old hd

---- Error 1327. Invalid Drive: G:\

Can someone please help me understand whats wrong and how to find a solution?

Cheers,

Xav

More replies
Answer Match 39.9%

Cant run any virus scanners I get "Windows cannot access specified device, file, or path." error.... getting horrid redirects and as you can see from THIS thread in the "Am I Infected" section we have tried a lot of things. DDS (Ver_09-07-30.01) - NTFSx86 Run by Vitamin SB at 17:41:55.32 on Wed 08/12/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_13Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.958.614 [GMT -5:00]FW: Norton Internet Worm Protection *disabled* {990F9400-4CEE-43EA-A83A-D013ADD8EA6E}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcsC:\WINDOWS\system32\svchost.exe -k WudfServiceGroupsvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exesvchost.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Java\jre6\bin\jusched.exeC:\WINDOWS\stsystra.exeC:\Program Files\Common Files\InstallShield\UpdateService\issch.exeC:\Program Files\Dell\Media Experience\DMXLauncher.exeC:\WINDOWS\System32\DLA\DLACTRLW.EXEC:\Program Files\Dell Support\DSAgnt.exeC:\WINDOWS\system32\ctfmon.exeC:\Program Files\UnHackMe\hackmon.exeC:\Documents and Settings\Vitamin SB\Desktop\dds.exe============== Pseudo HJT Report ===============BHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\adobe\acrobat 7.0\activex\AcroIEHelper.dllBHO: AVG Safe Search: {3ca2f312-6f6e-4b53-a66e-4e65... Read more

A:Windows cannot access paths?

Hello YouMayLose,You appear to be infected by a new very nasty Rootkit infection associated with a Rogue antivirus program. See here for more info.==========Let's begin.....Download and run Win32kDiag: Download Win32kDiag from any of the following locations and save it to your Desktop. Download Win32kDiag (Win32kDiag.exe) - #1 Download Win32kDiag (Win32kDiag.exe) - #2 Download Win32kDiag (Win32kDiag.exe) - #3 Double-click Win32kDiag.exe to run Win32kDiag and let it finish. When it states "Finished! Press any key to exit...", press any key on your keyboard to close the program. Double-click on the Win32kDiag.txt file that is located on your Desktop and post the entire contents of that log as a reply to this topic.Next......Download and run a batch file (peek.bat): Download peek.bat from the download link below and save it to your Desktop.Download peek.bat Double-click peek.bat to run it.A black Command Prompt window will appear shortly: the program is running. Once it is finished, copy and paste the entire contents of the Log.txt file it creates as a reply to this post.==========With your next post please provide:* Win32kDiag.txt* Log.txt

57 more replies
Answer Match 39.9%

Since a picture is worth 1000 words....



I can't figure out how to edit booloader paths.

I had the triple boot working- 7, vista, WUBI ubuntu. Then I installed Snow Leopard and tried to add it in via easyBCD.....and all hades broke loose.

Anybody know how to fix? And how to actually set OSX to boot from windows, since there's no drive letter?

A:Edit Bootloader Paths

Open an elevated command prompt in Windows 7

IMPORTANT: make a backup of your bcd file first. To do that, type:


Quote:




bcdedit /export C:\SAVEDBCD




For Vista:

Quote:




bcdedit /set {*insert here*} device partition=F:




* insert the Windows vista BCD ID, too small for me to read (take out the *'s)

ok, Vista should be working now, please test it to make sure

For Ubuntu: - optional; this will rename "nst Linux Loader" to "Wubi Ubuntu"


Quote:




bcdedit /set {*insert here*} description "Wubi Ubuntu"




* insert the "nst Linux Loader" BCD ID, too small for me to read (take out the *'s)

It is getting late, so try those, which should get Vista back on its feet, also go to the elevated cmd and type "bcdedit" please post back the results right-click the cmd prompt and select "mark" then highlight every thing, then post the results. Please copy the results, so i will be able to copy and paste

Also, what is the "EFI snow leopard" partition for???

19 more replies
Answer Match 39.9%

I was wondering what would be a good career path to follow or combine with a mcse certification. Would it be better to go the cisco way and get the ccnp or with red hat and do the rhce? I am currently in South-Africa and been around to our local job sites but it seems that demand for both are low at the moment.
 

More replies
Answer Match 39.9%

I have Windows XP Pro, sp 2.

I've encountered paths like: C:\DOCUME~1\ROYON~1\LOCALS~1\Temp. Except the tilde is higher. I don't know how to follow paths when there like this. Can someone please tell me how to interpret this path?

Thanks,

royeo
 

A:How do you interpret paths like C:\DOCUME~1\...

Hi.

This kind of path is contraction of the real folder or file names so that they are compatible with the old 8.3 DOS filename format. I don't know why it is necessary, but in (my) theory it works this way:
Long names are stripped of all spaces, even between words.
If the resulting string, without extension, is longer than 8 characters, the 6 leftmost characters are taken and an index appended, to distinguish between similar names.
So "ASDFGHJKLQWE" becomes "ASDFGH~1" while ASDFGHJKLRTZ" becomes "ASDFGH~2"

So the one you submitted translates to something like

C:\Documents and Settings\Username\Local Settings\Temp
Where username is different for each user of the computer.
 

2 more replies
Answer Match 39.9%

ok this might sound stupid but, i have a wi-fi router that also has ports for wired connections.
my laptop is usually connected to the router through the wireless medium but if i connect the wire too then what path would the packets take?
the wired or
the wireless?
 

A:priority of routing paths

10 more replies
Answer Match 39.9%

Hello,

A little background first.

I have a shortwave radio that is of a new type where a lot of the functions such as filters, etc. is done via software that resides on the PC.

The radio is mfg. by the WINRADIO company.
The model of the radio is a G31 DDC

After playing with the radio, it automatically Saves the frequencies that you have listened to, and puts them into Memory to be able to recall them later.
The file that it creates is called "User Memory"..

I seem to have the User Memory File in the right place, I think, but the "path" to get there seems to be different.

I have one path of:
Libraries/ Documents/ WINRADIO/ G31 DDC/ User Memory

And another path of:
C:/ Users/ Bob/ My Documents/ WINRADIO/ G31 DDC/ User Memory

They both seem to lead to the correct file of User Memory.

a. My main question: Is there really only one file of User Memory, but two different ways or paths to get to it ?

b. What's with Libraries; I've never set that up ? What are they ?


c. Notice that one path has My "Documents", and the other just "Documents".

If anyone could explain this for me, I would be most appreciative.

Much thanks,
Bob

A:Two Paths To The Same File Question ?

A Library doesn’t contain files, but provides a single aggregated view of multiple folders and their contents.

These links may help:

Libraries - Personal and Public User Folders

http://msdn.microsoft.com/en-us/magazine/dd861346.aspx

Windows 7 Libraries: Frequently Asked Questions

http://technet.microsoft.com/en-gb/l...33(WS.10).aspx

2 more replies
Answer Match 39.9%

My documents are located in D:\Dropbox\MyOwnDocuments

I no longer use Dropbox; so I would like to move them all to D:\MyOwnDocuments

Problem is that I have many portable programs there, and also program files and program data for programs running from my C drive. Not to mention various other shortcuts to documents or folders in D:\Dropbox\MyOwnDocuments

Is there a quick way to check which programs / shortcuts need to be changed? Or (better) is there a way to change these paths automatically?

Thanks for any input.

A:How to change paths seamlessly?

Use subst cmd to fool things they are still in the same location Subst

1 more replies
Answer Match 39.9%

From this download link: http://www.microsoft.com/downloads/d...displaylang=en
Unsupported Upgrade Scenarios


? Upgrades to Windows 7 from the following operating systems are not supported:
? Windows 95, Windows 98, Windows Millennium Edition, Windows XP, Windows Vista? RTM, Windows Vista Starter, Windows 7 M3, Windows 7 Beta, Windows 7 RC, or Windows 7 IDS
? Windows NT? Server 4.0, Windows 2000 Server, Windows Server? 2003, Windows Server 2008, or Windows Server 2008 R2
? Cross-architecture in-place upgrades (for example, x86 to x64) are not supported.
? Cross-language in-place upgrades (for example, en-us to de-de) are not supported.
? Cross-SKU upgrades (for example, Windows 7 N to Windows 7 K) are not supported.
? Upgrades from Windows Vista to Windows N, Windows K, Windows KN, or Windows E are not supported.
? Cross-build type in-place upgrades (for example, fre to chk) are not supported.
? Pre-release in-place upgrades across milestones (for example, Windows 7 RC to Windows 7 RTM) are not supported.

Supported Upgrade Scenarios



From Windows Vista (SP1, SP2)
Upgrade to Windows 7
Business
Professional, Enterprise, Ultimate
Enterprise
Enterprise
Home Basic
Home Basic, Home Premium, Ultimate
Home Premium
Home Premium, Ultimate
Ultimate
Ultimate
... Read more

A:Win7 Upgrade paths

These are "in place" upgrades.
To upgrade from XP is also possible doing a clean install.

1 more replies
Answer Match 39.9%

Hello,
 
I can´t find a solution to this problem anywhere in the Net, so maybe you guys can help me. I just did a reinstall of windows 8.1 on my desktop using the option to keep all data AND program files. The process went on very well....BUT when I restarted some programs' exe files are not found by Windows when I try to open them (Ccleaner and Office 2010 are examples) Ccleaner I uninstalled and reinstalled but the message is the same " Windows cannot find [path], make sure you typed the name correctly and then try again...." Office 2010 I ran the repair option but the message came on again, so I reinstalled it and couldn´t open it because the message came on again. I think paths got messed up somehow because those files are certainly in my hard drive. Please can you help me out?

More replies
Answer Match 39.9%

I can ping by name or IP address, but trying to connect via
\\name or \\ipaddress fails. IP v6 has been disabled on the adapter.  The error message is: 
\\share is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  A specified logon session does not exist. 
It may have already been terminated.

Thanks for helping!

More replies
Answer Match 39.9%

On my main PC i am running Windows 7 Homepremium 64bit. My Pc is connected via ethernet cable to BT Homehub3.

I have another PC running Windows XP SP3 connected via WiFi and a laptop also Wndows XP and connected vis WiFi.

I have a Kodak C110 AiO printer connected to the home pc via USB cable.

I have tried to set up printing on the other PC and laptop and the Printer is shown in the network map, but cannot and all my efforts have now disrupted the network; viz I cannot access shared files on the Network.

On the Home PC the network is called Network 2.

I want it to be the Homegroup or Work Group but cannot seem to make this happen.

Any suggestions please?

A:How do I reset my network paths

If I take it you want to print on the main PC from the other two ? I have a similar situation and set it up giving the main PC a fixed IP and then when adding the printer to the other two I used the local port method i.e \\fixed IP address\printer share name, having initially shared the main printer - you will need to install the printer driver on the remote systems. My main PC is ethernet and all the others are wireless.

Hope this is of help.

3 more replies
Answer Match 39.9%

after i run winaso registry cleaner/optimizer i get a messeage that i need to delte invalid files path

how do i do that ??????????

A:invalid file paths ???

Do yourself a favor, and if a registry cleaner offers to do something you don't understand, decline. It's far easier to clean the system to death than to actually fix something with a registry cleaner.

1 more replies
Answer Match 39.9%

Hi guys.
I've just tried to use WinMX and found that it is showing the full paths as to where files are stored on the users' HDs.

Can I turn this off? It makes it really difficult to see the file you're looking for, with all this C:\My Documents\My Music\..... crap at the front.

Thanks.

Gram
 

A:[SOLVED] WinMX paths??

Hiya

Go to the Search page. Then, look for a button that says:

Show Full Paths. Press that, and the paths should dissapear

Regards

eddie
 

3 more replies
Answer Match 39.9%

When I open 3ds max I get a number of error messages for example:
The fonts path D:\Program Files\W2KPrograms\Fonts does not exist. Use configure paths to set the locatioin to a path that does exist.
[These messages also include The Import Path D:\Program Files\W2KPrograms\Meshes, The export path D:\Program Files\W2KPrograms\Meshes, The Expressions Path D:\Program Files\W2KPrograms\Express, Previews Path D:\Program Files\W2KPrograms\Previews and Video Path D:\Program Files\W2KPrograms\Videos does not exist. Use configure paths to set the locatioin to a path that does exist.]
I would dearly love to do that but I don't know how???
Can anyone help me to find out how to 'configure a path?'
Many thanks.
J. Nabney
 

A:(Solved) How to configure paths?

7 more replies
Answer Match 39.9%

Firstly, context: My student edition of Autodesk Maya was not working (something about the license being invalid or 'not found', and so when I searched for the error message online, a solution was to go into Environments and Paths, and replace/edit or add one for C:/Autodesk. It didn't work, and I ended up just uninstalling and reinstalling the program manually for it to work.
However, apparently I screwed around really badly in there, because now important things won't open, such as my MalwareBytes program. When I try, a window will popup and say this:
"C:\Program Files (x86)\Malwarebytes Anti-Malware\mbam.exe
The system could not find the environment option that was entered."
So, naturally, I try to find/open the Environments and Paths thing again, right? Nope. I can't open that either:
"Windows cannot find '%windir%\system32\SystemPropertiesAdvanced.exe'. Make sure you typed the name correctly, and then try again."
Even though I typed 'Environment' in my search bar to find it.
Then recently, Origin tried to install an update on my laptop, but it couldn't find the ProgramFiles, and so there was an error in installation. As a result of this, Chrome is not opening up immediately when I click it. It waits about five-six minutes after I've clicked it. I think it's what caused it, because it didn't do it before yesterday, when I tried to install the update.
So basically: how can I fix this despite knowing little to nothing about computers? How can I go into the Environments with... Read more

More replies
Answer Match 39.9%

How would I set up Windows 8 so that I can edit the `path` environment variable in a fixed pitch font such as `Console` or `Lucida Console`? I don't want to change the font for other parts of Windows - only where paths are displayed. It seems I've been doing this in a terribly inappropriate font for many years and my tired eyes aren't great for semicolons.

A:change the font for paths

Hi Broiyan,
In windows 7 it was so easy by going to control panel, but now is much harder(you`ll see what i mean):
As Far As i know go to regedit>>>>HKEY_LOCAL_MACHINE>>>>SOFTWARE>>>>Microsoft>>>>Windows NT>>>>Current Vision>>>>FontSubstitues>>>> thats all what i know now i need an MVP like brink to hep you with here.

9 more replies
Answer Match 39.9%

Will the Windows Vista Upgrade path allow me to upgrade from 64 bit Home Premium to 32 bit Ultimate? I need to do this to use my legacy software without re-installing everything.
 

A:Vista upgrade paths

The last that I read, going from 32 to 64 required a CLEAN install. Based on that I would think that it would be the same for 64 to 32.
 

1 more replies
Answer Match 39.9%

Dear All,

One of my user is facing copy paths issue in window 7 enterprise . User get the following error.




Thanks & Regards,
Kashiram Sawant

More replies
Answer Match 39.9%

Hello! I recently upgraded my computer with an SSD for boot and main programs and use my 1TB HDD for general programs and media storage. The thing is I want it to by default install to my D:\ drive.

Now the only solution I see is editing the registry ProgramFilesDir - Which has some serious flaws. It will attempt to launch every program off of the D:\ drive even when it is stored on C:\ and about 9 out of 10 times, it still default installs to C:\.

Does anyone have a fix for this?

More replies
Answer Match 39.9%

I am using Oplisker program.

Oplisker (Open Source Play List Maker) | SourceForge.net

How to create m3u file from mp3s in different folders on your computer ?


It seems to only create mp3 playlist only from mp3s in the same folder.

I was interested to create playlist from different folders with different paths
to save to one m3u file, not m3u file in each folder from the mp3s within that folder.


I know I can edit the file so it goes to different paths using notepad, but that would defeat the purpose of this program making it easier to save playlst from diferent mp3s in diffrent folders.

Thanks

More replies
Answer Match 39.9%

There are still doubts about what the possible and legal upgrade paths are for Windows 7.

Below I tried to compile some information in a way which I hope will be helpful.

Thanks to my friend Kari for his valuable contribution
Any other additions or comments are much welcome

Definitions:
1) Upgrade: to move from Windows XP or Windows Vista to Windows 7
2) Custom or Clean Install: wipes the previous installation and install Windows 7 anew. Does not preserve user files
3) In-Place Upgrade: upgrades from specific versions of Vista to specific versions of Windows 7, preserving user files and programs.
4) Upgrade version: Windows 7 license for those who own a valid license of XP or Vista
5) Full retail version: Windows 7 license to install on any PC, independent of previous installations or ownership. Can be reinstalled on other computers (when activated the previous installation is no longer valid)
6) Full OEM version :Windows 7 license to install on one PC, independent of previous installations. Can only be re-installed on same computer and hardware setup

Upgrade paths
The chart below shows in what situations one can perform an in-place upgrade (e.g. from Vista Business to Windows 7 Professional) without the need to migrate files or programs, and the situations when one needs to do a Custom (Clean) Install and replace the data in the target disc. This is the case for all Windows XP owners or Windows Vista Starter. In this case you will need to migrate your personal files ... Read more

A:Windows 7 Upgrade Paths - FAQ

Excellent!

9 more replies
Answer Match 39.9%

How do you get to see the full path rather than have part of it cut off?
 

A:Seeing full drive paths

Take a look here:
http://www.ehow.com/how_2073275_display-files-complete-path-windows.html
 

3 more replies
Answer Match 39.9%

I use WinAso Registry Optimizer; when I run it my computer crashes when it gets to Invalid File Paths, but when I remove the invalid file paths flag, it completes the process just fine. I would like some advice on correcting invalid file paths...thanks.
 

A:Invalid File Paths

Don't use registry cleaners. If you continue to use them, chances are that crashes will be among the least of your problems. Those things are junk, do only harm, and you should be thankful you were even able to reboot. Performance is not improved by using them, they remove needed entries, and they create their own "errors" so that they can "fix" them, making worse errors in the process.
 

3 more replies
Answer Match 39.9%

So I've been trying to use system file checker, and encountered a problem where it can't repair a file. I found this page detailing how to manually fix the problem:

Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

I was fine until step 2, where it says

"For example, type takeown /f E:\windows\system32\extremely_simplified_example.dll"

The problem is, my CBS.log file says stuff like:

Cannot repair member file [l:24{12}]"FWPKCLNT.SYS"
Unable to repair \SystemRoot\WinSXS\Manifests\\[l:24{12}]"FWPKCLNT.SYS"

and I don't know how to translate that into a path to use with the takeown command. I searched for that file using explorer and found a dozen different copies, so I'm not sure which one to replace.

Semi-related questions: Can I just replace them all? I'm planning on using a copy of the file from a similar system that works, is that ok?

Thanks!

A:Help understanding CBS.log file paths

Hello Southbound, and welcome to Seven Forums.

Those instructions there are fine, but just a bit vague. OPTION THREE in the tutorial below can help give you only the SFC results to help make it easier to go through.SFC /SCANNOW Command - System File Checker
Next, the tutorial below can show you how to extract files from your installation disc to replace any listed files that SFC cannot repair.Extract Files from Windows 7 Installation DVD
Before doing anything, please post back and upload your sfcdetails.txt file to see what all may be wrong, and if it any file that cannot be repaired is worth worrying about.Screenshots and Files - Upload and Post in Seven Forums
To help interrupt what it says to know the path:Cannot repair member file [l:24{12}]"FWPKCLNT.SYS"
Unable to repair \SystemRoot\WinSXS\Manifests\\[l:24{12}]"FWPKCLNT.SYS"
The first line says that SFC cannot repair the FWPKCLNT.SYS file.

The second line is the path of the file. "SystemRoot" is a variable "%SystemRoot%" that is actually just a shortcut for "C:\Windows". This leaves you with the file path as:C:\Windows\WinSXS\Manifests\FWPKCLNT.SYS
Doing a search on the C: drive for the listed FWPKCLNT.SYS file would help give you all of it's locations if needed as well.

Hope this helps for now,
Shawn

3 more replies
Answer Match 39.48%

I changed the user name from "user001" to "user888". That changed the name on the login/logout screens. But the user folders and paths all stayed with the old name "user001". As a result some things, like the name installed programs will grab and use, are still called "user001".

Is there a way, short of re-installing Windows, to change all the appropriate folders, paths and registry entries to read "user888" and get rid of the old user name completely?

A:Changing the User Folders (and paths)

You may want to create a new account and move the user files over to that new account. Then delete the old account.

A good explanation can be found from Brink below:
Creating a New User Account Similar to an Existing User Account

6 more replies
Answer Match 39.48%

Hello everyone! New here with this problem, hope I'm entering it under the right category (if not, sorry)

I have a local and a network folder embeded in a tiddlywiki page in iframes.
They both contain folders, .doc and .xls files with both greek and english names.
I've set up the open office plugin to show the aforementioned files within browser, so the frames work as
a sort of view area (http://ubuntuforums.org/showthread.php?t=94384&page=2 ).

At the same time I need to be able to open the folders / files in their native windows environment.
The above configuration doesn't allow that as .doc and .xls links open in the open office environment by default.

A number of firefox add-ons (Open With 4.0 / https://addons.mozilla.org/en-US/firefox/addon/11097/,
IE Tab 2 / https://addons.mozilla.org/en-US/firefox/addon/92382/) provide the functionality to open firefox links in different browsers and/or programs.

I've set up explorer, winword.exe and excel.exe as manual entries in the Open With add-on which allows you to right click on firefox links and select to open them with these applications. Other add-ons allow you to do the same thing with internet explorer or a chosen application.

They all present the following problem:

The plugin works perfectly when opening the folder file:///C:/a with explorer
and the files file:///C:/a/a.doc with winword and file:///C:/a/a.xls with excel.exe.

But I get a path does not exist or is not a directory error when... Read more

More replies
Answer Match 39.48%

i installed vista on a spare dock drive to test it out i decided i liked it so i ordered another drive for vista to run on then i backed up my storage drive and then formated the drive from a XpPro x64 OS and reinstalled vista on its own dedicated hdd the prob is when the installer reboots and it gets back to vistas boot screen it shows 1 xp boot path and 2 vista boot paths one works and the other doesn't but in the one that dose i get all kinds of missing file and corrupt file errors any ideas?
oh and is there anyway to speed up the vista install its kinda sluggish (normal?)
thanks in advance.

AMD BE X2 5000+ 3Ghz 200x15
Asus Formula Crosshair II
8Gb Corsair Dominator 1066 running at 800 (4x2gb)
2 WD raptor 74Gb in raid 0 (XpProx64 &Games)
2 WD caviar 250Gb dock drives
WD raptor 300Gb (for vista)
2 EVGA 9800 GTX SLI
Enermax Galaxy 1Kw PSU

More replies
Answer Match 39.48%

I'm trying to set up Symantec Backup Exec 12 on Windows Server 2003. I want to be able to backup week 1 to X:\, week 2 to Y:\ and week 3 to Z:\ as Backup Exec requires each drive to maintain its own drive letter.

I have 3 Seagate Free Agent hard disks. When I try to assign each one its own drive letter, it won't maintain it. For example if I set drive 1 to X:\, the swap it out for drive 2 and assign that one to Y:\, when I plug in drive 1 it will mount as Y:\ rather than X:\ which I originally assigned it to.

Does anyone know how to get Windows to recognize that these are three separate drives and allow them to maintain their own drive letters?

Thanks.
 

A:Different removable disks assigning different paths

can you not go into diskmgmt.msc and assign the drive path you require?
 

2 more replies
Answer Match 39.48%

I just ran a customized install of Office Ultimate 2007. I open Powerpoint, and tried to access the clipart library to insert a clipart image. It gives me an error saying it can't display the clipart, and tells me I have to run Setup again, and choose "Add & Remove Programs" to install the feature; but it doesn't say WHAT feature. I've done customized installs 100 times, and never had this issue. I've also got the Office12/Clipart folder on another partition from a past install. So, I was going to try and go to the Options/Paths like Office USED to have, but NOO can't go there. So, how the #$&& do I fix this issue?

GPL

A:How Do I Find & Determine Paths for Office

Go to Control Panel, Programs and Features
In the list of installed software, select Microsoft Office.
Click Change.
In the Setup box, click Add/Remove Features.
Click the Plus sign next to Office Shared Features
Click the Down arrow next to Clip Art and click Install All
Click Continue
If prompted by Setup, insert the appropriate disk

4 more replies
Answer Match 39.48%

Hi, I was doing a clean-up and accidentally deleted all the environment variable paths. Can someone please give me a step-by-step instruction on how I can fix this issue without having to restore or enter them 1-by-1. thankyou

A:deleted Enviroment variable paths, please help.

You could try the previous restore point prior to the deletion.
Win+R->rstrui.exe

1 more replies
Answer Match 39.48%

Having moved a bunch of shared printers from one server to another, I need to change the local printer paths on all workstations - is this something that can be done at a command line, and therefore scripted and placed into a batch file/login script?

I rather think it's going to have to be done with something like VBScript or WSH (about which I know nothing!) but if anyone has any ideas, I'd be pleased to hear them.

Thanks.
 

A:Lots of changed printer paths....

7 more replies
Answer Match 39.48%

If I've mapped a drive through the network, I know i can disconnect it, but after that, I need to delete the path from the drop-down list. how do i do that?
 

More replies
Answer Match 39.48%

Hi friends!

I'm experiencing a very strange bug with a custom library. On the odd occasion when I open an explorer pane and navigate to my library on the left-hand side, two of my included folders - which are both located in 'C:\Program Files\...' will change to a non-existent 'C:\Program Files (x86)\...' version of the same folder. If I click on that folder in the library pane it will tell me the folder doesn't exist.

It happens infrequently but often enough to be annoying. It's not immediately clear what causes it or why it stops. When it happened just now I closed all open explorer panes and opened a new one, and the library displayed the correct 'non x86' folder structure.

Any idea what causes this and how it can be avoided?

Thanks!

Adam

More replies
Answer Match 39.48%

Where are the Office programs' exe files found? I cannot find them in 2010?
I check the Office program shortcuts and they look like this:

"C:\Program Files (x86)\Common Files\microsoft shared\Virtualization Handler\CVH.EXE" "Microsoft Excel 2010 9014006204090000"

Which doesn't work when I insert that in "add" to the programs in Setpoint (Logitech's software for VX Revolution mouse)

A:Office 2010 Program Paths?

Have a look in C\Program files\Microsoft Office

9 more replies
Answer Match 39.48%

Hi all,

I was hoping someone knowledgeable could clear up some confusion I have on the upgrade process. I've googled my questions and it seems there is no definitive answer and that Microsoft themselves seem to not be consistent on their treatment of upgrades.

I originally wasn't going to upgrade but at $39.99 for a Pro version, I can't resist. I am aware that you need a current install to upgrade. I was hoping that during the upgrade process I would be given an option to chose the key I wished to invalidate for the upgrade. Now, I am quite fond of my Windows 7 license and am going to keep it around in case I don't like Windows 8 and just because it is a great OS.

So my dilemma is as follows:
I have a couple full licenses for XP and Vista. I also have the OEM license of Vista Business that is on a sticker on my computer. I am resigned to the fact that I'll have to uninstall my current OS and install an old one for the upgrade and I can live with that.

I would, however, like to get rid of my most worthless license for the upgrade, which in my opinion is the one OEM one on a sticker on my laptop. So I guess the question is would the limitations of the OEM license, which is that it is only valid for that specific machine be attached to the upgraded version. As the Pro upgrade is for a limited time only, I imagine any future computer I will buy will have the Home version with it and I would like to preserve my access to the Pro version as well as to have the option to have a... Read more

A:Upgrade paths and future limitations

Hello jaebberwock. Welcome to the Eight Forums.

You mentioned "in case I don't like Windows 8" so I guess you haven't used it yet.
Based on that assumption, I would suggest downloading Windows 8 Enterprise Evaluation for free. (good for 90 days) Burn it to a dvd. Do you know anything about imaging? Do you have any external drives? I would consider learning a little about external drives so that you could make some images? Are you on a budget? Can you afford to spend a few bucks on imaging software? Search online for imaging software. You could image your XP system without affecting it by an upgrade. Same with Vista or Windows 7. Image what you want to save so that they could be returned to the condition they were in. I cannot help you with your questions about upgrading licenses and keys so maybe someone else will chime in. Personally, I am not a fan of dual booting, many problems could happen. Opinions vary.

Download Windows 8 Enterprise Evaluation

From my point of view, I would image backup XP, Vista, Windows 7 using the software of your choice (perhaps something like Acronis). Then, install Windows 8 on unallocated space. Do you know what unallocated space is? I apologize. I know nothing about what you know. Anyway, good luck. There are tutorials here:

Installation & Setup - Windows 8 Forums

Suggested Steps To Take Installing And Setting Up Windows 8

2 more replies
Answer Match 39.48%

I've had the asian language pack installed on my laptop for awhile now and I know of a similar issue that involves the Korean won symbol, fortunately that never happened to me and I use my computer to type Korean frequently. I was attempting to get a program to run in Japanese to help out one of my friends, and after a restart; anywhere there's a file path it shows the &#65509; instead of \.

I know there's no difference aside from appearance, but it's really annoying to look at it.

I've uninstalled the program and looked around the Regional and Language options, policy settings, and about anywhere I can think of, maybe I missed it somewhere, but I can't find a way to revert it. Can anyone help? Thanks.
 

A:Yen symbol () instead of backslash in file paths.

Shameless bump.
 

2 more replies
Answer Match 39.48%

I'm trying to figure out how to change my file path names. The system name on my computer is Tsula but all paths still say the 'Owner' thing.

Example: C:\Documents and Settings\Owner\My Documents\My Music\Enya\Enya (new age)\2005 - Amarantine

Know how to fix it? x3

A:Changing Root Name In File Paths

I think you need to create a new profile and move settings from old to new, How to copy data from a corrupted user profile to a new profile - http://support.microsoft.com/?kbid=811151 Louis

2 more replies
Answer Match 39.48%

I have a program that plays music on VB 2008 Express Edition. It accesses music from my memory stick because I'm going to need to move the program to another computer. However, the memory stick was always listed under the J:\ drive, but now randomly it's listed under the K:/ drive. Is there a way so that I can just get the music "into" the program so that it can just play the music no matter what computer it is on. P.S. I also need to get this program to run on XP, and the file path is E:\, I'm afraid that since mine changed randomly, the XP computer I'm moving it to will also change randomly.

Please Help!
 

A:File Paths Changing Randomly

You can change the drive letter by going to Administrative Tools in Control Panel and them going into Computer Management, there is a section called Disk Management which will show all connected drives, from there you can change the drive path.
 

2 more replies
Answer Match 39.48%

After a bad recovery, I couldn't get a portion of windows to work. Went to Hp and microsoft both for the problem. Hp's suggestion on the matter, was to use F8, windows advance options. and select return to os choices.

Problem was I didn't know which to choose, nor, if I was following the right procedure. Would someone answer this please. Thank you

1:D:\MiniNt
2.D:\1386
3:C:\Windows

Xp pro sp2 Media center edition
os Xp pro, ie 6 after recovery

Boot. INi

[bootloader]
timeout=3
default=multi(0)rdisk(0)partition(2)\Windows
[Operating systems]
Multi(0)rdisk(0)partition(2)\Windows="Windows XP media Center Edition"/noexecute=optin/fastdetect
C:\cmdcons\Bootsect.Dat="Microsoft Windows Recovery Console'/cmdcons

A:Boot Ini paths screwed up after recovery

What appears from the first looks,
You should choose C:\Windows.

1 more replies
Answer Match 39.48%

Hi there,
I have been looking for a simple way to begin to understand the command line in windows. I'm trying to import python code from a folder, and at the moment I can only get my code to run if I save my folder in the default c:\Users\Jamie\<full path>. My question is in two parts
1. How can I run simple scripts from anywhere else (say, my documents)
2. Can I edit paths somehow such that typing % python <script name> will run my script, from the default C:\Users\Jamie, or otherwise?
Sorry if the questions themselves contain errors in understanding, i haven't used the Windows command before

A:Using PATHS in the command line in Windows 7

so you want to do this in command prompt?

python c:\whatever\subfolder\somescript.py


Where is python.exe located?

You want it to work for your account only I assume (?)

9 more replies
Answer Match 39.48%

Hi All,

I have installed RocketDock on my computer and I want use animated icons to launch just about everything I need to do. They require a direct path. I can't create a "sound" shortcut and then change it to an animated icon, as far as I know.

The path for control panel is: C:\Windows\system32\control.exe

I'm looking for the path for the "sound" menu (playback tab, specifically).

I also want the paths for:
My computer
Calculator

Thanks!

A:Direct Control Panel Paths?

::{20D04FE0-3AEA-1069-A2D8-08002B30309D}

%windir%\system32\calc.exe

Not sure how to open on playback tab, try %windir%\system32\sndvol.exe then click on the icon for system sounds for example.

Maybe it will accept this:

rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,0

1 more replies
Answer Match 39.48%

Love 7 so far! But today I needed to access a share (\\servername\share) but when I went to type it, it came up cannot connect. We're on a domain with AD, and noticed in eventvwr that GP not processing:

The processing of Group Policy failed. Windows attempted to read the file \\internal.domain\SysVol\internal.domain\Policies\{5682A7A2-6BAE-4655-8DB6-7CAF8ECC6042}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.

Also would not map network drives. Anyways, ended up doing a system restore to a known working point in time, and that seemed to work, until I rejoined the computer to domain (since it had lost the trust relationship because of the system restore), but after a few group policies processed, and a couple critical updates were installed, it broke again. So now I unplug from the network at bootup, login, then plug network back in, and it seems to be a workaround for now, but hopefully it's only a temporary one. Anyone have any ideas?

A:Network paths (UNC \\server) broke

I would check DNS and that your clock is set to match your domain controller.

2 more replies
Answer Match 39.48%

When I first installed Win 7 I simply went with the default user name of "Owner". I wouldn't mind changing it now but I'm concerned about the effect on my shortcuts and so on.

If I rename it, will Windows go through and automatically update all the shortcuts and program paths and so on? My gut reaction is "Of course it will" but I've learned to be cautious with Windows! Will I end up with a lot of tidying up to do?

A:Will changing username mess up paths?

Only the username will be changed. The c:\users\<username> path does not get changed and this can lead to more confusion.

Better method:

1) Create two new accounts. One in the username you want, and one temporary...you can even call it TEMP if you like.

2) Log in as TEMP. Use Windows Easy Transfer to migrate all files and settings from your old account to the new one you just created.

3) When this is complete, log in as your new user and make sure everything is there and working.

4) Delete your old user and TEMP.

3 more replies
Answer Match 39.48%

There is an Excel App on our network that gets used by multiple users. In this app there are some VLookups that pull information from other spreadsheets. The problem we are having is that the physical paths in the VLookups are being changed to relative paths. Instead of using L:\Files\somefile.xls it changes to \\server\share\somefile.xls.

When this happens the VLookup stops working, it's odd because both paths are legetimate but only the one with the physical path works. This is happening on several different spreadsheets and the formulas have to continualy remapped.

All users are using Office 97 but the OS are mixed, Win ME, 2000 and 98. Any ideas?

Here are the Vlookups:

Before
=VLOOKUP($C18,'L:\shared files\[EmpDataLog.xls]RATE'!$B$10:$AZ$642,5)

After
=VLOOKUP($C18,'\\server01\shared files\[EmpDataLog.xls]RATE'!$B$10:$AZ$642,5)

 

A:Paths changing in VLookups (Excel)

Hi, Tal. I suspected, so I confirmed with someone else here at work, that your users have drives mapped differently and they really need to be the same.
 

3 more replies
Answer Match 39.48%

Quote:
So, how can I get an Absolute path into my Test Volume's G:\boot\BCD store ??


Using Visual BCD Editor or bcdedit.

VBCDE can edit every single element of BCD - it's a general and professional tool like bcdedit - give it a try.

More replies
Answer Match 39.48%

On my desktop-computer i have shared some folders with my home network. Then i changed their paths, as i reorganized myself. Now it seems, when I acces the network, those folders paths dont seem to be updated, as i cant access them.

I can now of course "unshare", rename and share them again, which makes them again accessible through the network, but the old "folder names" still remain. why is that, how can i correct it?

Same problem with some old "synched folders".

A:shared folder and changing their paths

Curious, where do the old 'folder names' remain? Just in the drop down menu under 'Map network drive ...'?

If so those paths are saved in your registry.

Best Wishes,
R?nce

2 more replies
Answer Match 39.48%

Hey Techspot,
The other computers in my network have trouble accessing certain shared folders on my main computer. I have three drives installed, C: my OS drive, and D: and B: file drives. My C: Public folder, another folder on C: and my entire D: drive have been shared for a long time, and are the only paths the other computers can access. Anything I try to share now (except stuff on the D: drive, since the entire thing is share-enabled) will return the "is not accessible. You might not have permission to use this network resource." error.
I can understand why a computer in it's entirity wouldn't be accessible across a network, but as to why certain locations wouldn't work - some on the same drive as locations that do work - I'm at a loss.
Thanks in advance!
 

A:Certain paths and folders inaccessable across network.

The edit button isn't working so:
I forgot to mention, all the computers are running Vista Home Premium or Ultimate, all on an ethernet lan with a Belkin router.
 

5 more replies
Answer Match 39.06%

Hi,

After installing installing SP1, a folder on my C drive is left over.

I am unable to delete it since the path is too long, see attachment.

Also, see attached txt file for directory and file info.

I can't rename the files either, rename does not even show up on context menu and F2 does nothing.

So safe to delete these files some how? I get the same error if I try and move it like it recommends in the message. I tried moving just a single file to C drive but same error.

Not a big deal since it's only 2 484 269 bytes or 2.36918354 megabytes worth of files.

Take Care,

Will

A:Odd Files Left Over After SP1 - Can't Delete (Long Paths)

I'm not sure if it will work with the file you're having problems with, but you can try Windows 7 Disk Cleanup.
There is an option for Service Pack Backup Files.

9 more replies
Answer Match 39.06%

Long file paths cause real problems when need to move/copy or delete large amount of data that the path is 350 character long (max character allowed by Windows is 256)

I was wondering if anyone knows of any third party app. that can help with this. Something that will prevent users from naming files/folders on the network and display a message to them.

Renaming files/folders is not what I'm looking for. The problem currently is resolved, I'm trying to avoid this from happening in the future.
Thank you
 

A:Prevent users from creating long paths

I think the real problem here is that the users don't always see the full path.
If you as an administrator map a network drive to a path, the user will be blissfully aware of the true full path.
I'm pretty sure that no human is going to use a path that length deliberately.
 

1 more replies
Answer Match 39.06%

Quote:




Last week Microsoft announced the Windows 10 editions that will power personal computing and Enterprise systems across the growing wide range of devices available. With this announcement Microsoft also reconfirmed they will offer free upgrades to Windows 10 for qualifying Windows 7, Windows 8.1 and Windows Phone 8.1 devices for the first year after the launch of Windows 10.

This week, a blog post on Microsoft's Australia Partner Network offered more detailed information about the specific paths for upgrading to Windows 10. As previously mentioned, but now further spelled out, devices that take advantage of the free upgrade will receive ongoing Windows 10 updates for the life of that device and the free upgrade to Windows 10 will be delivered through Windows Update.




Microsoft spells out upgrade paths to Windows 10

A:Microsoft spells out upgrade paths to Windows 10

"If upgraded within the first 12 months following launch, the device will receive ongoing Windows 10 updates for free for the life of that device"

Now that's what I wanted to see, until now there has been no clarification as to whether updates would be free or a suspected subscription service.

2 more replies
Answer Match 39.06%

when i first got my computer i came up with a lofty way of partitioning my 16o gb hard drive into different sections for different purposes like media partition and a system and a possible linux/ UNIX partition. but i haven't followed my plan and my f ( 60 g's) drive is almost full and my E drive ( 50 g's ) is completely empty can i combine the drives without messing up all of my file paths? maybe if i named the new drive f it would change anything? e is completely empty though
 

A:Partitioning hard drives and file paths

Well, yes if you use a program like Partition Magic that does non-destructive partitioning you can then id the partition as F, and not have lost your paths.
 

1 more replies
Answer Match 39.06%

HDD is labeled E:, but it does work. cd/rom is labeled H:, and it does not work. USB HDD is not even recognized. How do I reset (remap?) to the default drive paths.
 

More replies
Answer Match 39.06%

Well i running windows xp sp2 and i simply forgot how to set paths. For instance if i'm at the command prompt and wanted to use the "ping" command no matter what directory i'm in it would execute the command. Unfortunately i have no clue to what happened but now i have to be in the windows\system32\ directory in order to issue the command. Can anyone help me with this?
 

A:Solved: A simple question about setting paths

14 more replies
Answer Match 39.06%

Hi everyone,

I got a new HP Pavilion laptop with Windows 7 Home Premium 64-bit. When I booted it up for the first time, there was already an administrator account on it named after the company who sent me the laptop. I renamed the user account and the computer to my name. Unfortunately, this change was not taken over by my profile folder or the profile folder paths. For example, if I go to the C drive and to "Users", then there's the Public folder and underneath it is my profile folder (which has a lock icon) - stuck with the previous name. I can access it and see the picture, music, desktop etc. folders with my stuff in them. I wanted to save a Word Document, and the username in the path was the old one, so that's how I first noticed the issue.

I searched and asked around and found out that I'd have to create a new user account and delete the old one to fix this issue. I came across two sets of instructions. I found one set over here in this Microsoft document for Windows 7 - it is about replacing a corrupted user profile, and it says that one would need THREE user accounts to do it...Very confusing...obviously, my user profile is not corrupt, but it looks like I have to replace it:
Fix a corrupted user profile

The second set of instructions I came across simply said that I'd have to do the following:

1) rename my current account back to the old unwanted name
2) create a new administrator account with my name and log into it
3) copy documents, music, picture... Read more

A:Changed user account name but profile and paths keep old name

  
Quote: Originally Posted by PallasAthene


Hi everyone,

I got a new HP Pavilion laptop with Windows 7 Home Premium 64-bit. When I booted it up for the first time, there was already an administrator account on it named after the company who sent me the laptop. I renamed the user account and the computer to my name. Unfortunately, this change was not taken over by my profile folder or the profile folder paths. For example, if I go to the C drive and to "Users", then there's the Public folder and underneath it is my profile folder (which has a lock icon) - stuck with the previous name. I can access it and see the picture, music, desktop etc. folders with my stuff in them. I wanted to save a Word Document, and the username in the path was the old one, so that's how I first noticed the issue.

I searched and asked around and found out that I'd have to create a new user account and delete the old one to fix this issue. I came across two sets of instructions. I found one set over here in this Microsoft document for Windows 7 - it is about replacing a corrupted user profile, and it says that one would need THREE user accounts to do it...Very confusing...obviously, my user profile is not corrupt, but it looks like I have to replace it:
Fix a corrupted user profile

The second set of instructions I came across simply said that I'd have to do the following:

1) rename my current account back to the old unwanted name
2) create a new admini... Read more

9 more replies