Tech Problem Aggregator

CGV ray liner ts Universal LCD Touch Screen Remote Control wont work

Q: CGV ray liner ts Universal LCD Touch Screen Remote Control wont work

i have a CGV ray liner ts Universal LCD Touch Screen Remote Control and it wont work on anything i've tried all the codes and the search through the library and nothing is working it can control six things and i only want it for my tv, set top box, and dvd player.
i hope someone knows more than is the user manual (which i read hundred times)

More replies
Answer Match 85.26%

I need a universal remote control for my television connected to Cablevision.

1. Is there an appreciable difference between $10. Sharper Image Universal Remote Control purchased from BJ's and a $30 Logitech harmony 300i Remote purchased at Best Buy.

2. How do I program it for an older Sylvania tv?

Thanks.
 

More replies
Answer Match 81.48%

had this computer for little over 2 months and snce having it the touch screen will not work at all hp 15.1 notebook, touch the screen nothing happens look in device manager cant even find the touch screen in there, any help would be appreciated, thanks

A:touch screen on windows 10 wont work

I request you to boot the PC to BIOS and test the touchscreen in BIOS. To boot the PC to BIOS, first turn off the PC completely. Keep tapping ESC on startup. You would get a startup menuPress F10 to get into BIOS. do not keep the PC in mute. Touch the screen in BIOS, the PC should beep.  If the PC beeps in BIOS (system utility), the touch screen is fine and you are facing a driver or a software issue. If the PC does not beep in BIOS, when you touch the screen, there is a issue with the display/touchscreen. Considered as a hardware issue (service or display replacment might be required). Please share the product number of your PC. This will help get the specification of your PC and I can give further suggestions.  ****Click the White thumb to say thanks********Please mark Accept As Solution if it solves your problem****

1 more replies
Answer Match 81.48%

please help me had win 7 upgraded to win 10 now my touch screen wont work please help!

More replies
Answer Match 81.48%

please help me had win 7 upgraded to win 10 now my touch screen wont work please help!

More replies
Answer Match 70.56%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

More replies
Answer Match 68.88%

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver.  What am I missing? Where I can I find it to activate the touch volume control?

A:Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 68.04%

I have a Dell M1330 which comes with a remote control that works with Windows media centre and windows media player. I recently installed realplayer and it works (play, pause etc) with it too. For some reason VLC and sonic stage don't respond to the remote control (only the volume works), is there any way to change this?
 

A:Is it possible to get my remote control to work with VLC?

http://forum.videolan.org/viewtopic.php?f=14&t=34801&p=137721
 

2 more replies
Answer Match 67.62%

For some reason, my logon background image isnt showing up anymore, and when I try to change back to the way I had done it, regedit wont run, I've searched the forums for an answer, with no luck. And when I go to click grant admin full control, it brings up an open with menu, so I need a command script to grant admin to certain files again.

Windows 7 home premium 64 bit.

Please help, and thanks. And no, I dont have any viruses or malware, I take good care of my computer.

A:Regedit wont run, and grant admin full control context menu wont work

Hello ElliottGenocide

Firstly do you have a system restore point available from before these problems occurred - System Restore
Can you remember what it was you changed in the registry.
Have a look through this,it has a copy of the default background and an application to change the logon background without having to touch the registry - Log On Screen - Change
I would also run this - SFC /SCANNOW Command - System File Checker see if that helps.

Danny

9 more replies
Answer Match 67.2%

Hello guys,
I'm trying to use the X360 Media Remote Control (this) with my PC (e.g., with Media Center) via the Receiver (this).

I googled, and all the solutions I read didn't solve my problem. Maybe I need to link the remote controller with the receiver somehow?

If anyone can help get through this, would be much appreciated.

A:X360 Remote Control, can't get it to work

Check this out, yet?

3 more replies
Answer Match 67.2%

I just purchased hp dv6000, so i am confused now its remote control not working.... any suggestion?

my OS is windows 7 ultimate n 32 bit

A:hp dv 6000 Remote Control Does Not work

Do you have drivers installed?

Did you install or change anything recently that might have changed the settings?

~Lordbob

3 more replies
Answer Match 67.2%

I am looking for a remote control that can operate my Pc (not remote desktop control) in the same way i operate my DVD player and TV.

The remote should be compatible with Win 7 and must be RF (as against IR)

Please let me know where i can buy one (online)

I am aware of the ATI Remote Wonder II but it does not fit my requirements

Any others??

A:is there a hardware RF PC remote control that will work on win 7

Have a look at the following, if you are specific on RF.

Amazon.com: Lenovo Multimedia Remote with Keyboard: Electronics - New (Read the user reviews)

Lenovo Outlet - Lenovo Multimedia Remote with keyboard Scratch & Dent - Discounted Laptops, Cheap Laptops, Refurbished Laptops, Discounted Desktops, Cheap Desktops, Refurbished Desktops (Read the user reviews @ Lenovo - United States also if you want New straight from the horse's mouth. )

If you can go with IR , then a good one EZ Commander - An innovative I/O solution to replace PC remote/mouse/keyboard/presenter It has a twin IR emitter for positive and wide-angle operation.(you have to search whether it is available with any other vendor. )

These are the ones I would recommend based on my personal experience. I have both and use the Lenovo most.

9 more replies
Answer Match 67.2%

Hello i have strange problem, my hp remote not work on windows 7. After 2 years i preinstall from vista home preimum to win7 ultimate. My laptop is hp pavilion dv7-1023cl
and i have all windows 7 x64 drivers, and all hp services running on automatic mode, HID also. I try many many times to set up IR to receive signal from remote, but i no have success. This is information from back side on remote:
RC1762307/01
3139 228 53391
HP SPS: 464793-001
HP: HSTNN-PRO7

P.S: I hope to help if it is possible that this problem be solved.

A:Remote Control Doesn't Work in Win-7

ok i think you possibly need the drivers for your remote, after a long search i came up with this,

HP Support & Drivers | United States

select the detect your product and it will scan your machine and tell you what drivers and software are available ,

9 more replies
Answer Match 67.2%

I've downloaded all drivers required for Windows 7.I replaced #920-001861-01 touch pad with cable. The touchpad and touchpad buttons still wont operate

More replies
Answer Match 66.36%

Seems many people with touch screens are finding what worked with the developer version have been ripped out for the Consumer Preview. Why did they do this? I contacted Planar the maker of my touchscreen and they said Microsoft removed the Control Panel for touch screen devices and they are not sure why.

More replies
Answer Match 66.36%

I have an HP Envy M7-J120DX-17.3" laptop running Windows 8.1. I've had this machine for about 8 months now and have loved it.
 
Over the last while now I've had an issue where I suddenly lose control of the mouse - the cursor starts jumping all over opening random things. I get the grey circles as when one touches the screen except they're popping up all over the place. I'll immediately shut everything down. When I reboot it doesn't show itself right off but eventually it returns.
 
I've attached a couple of images of the laptop screen so you could see what I'm dealing with - I've circled in red the "touches" that I could catch with my camera. The shots are of my desktop screen - the "touches" bounce around like fireworks going off but don't hit anything as they're more concentrated in the middle of the screen. If my Windows 8.1 screen was up, everyone of those "touches" that happened to hit a tile would open it. When on the internet it's a nightmare because bookmarks, links etc all can randomly be touched and opened. I had to drag the virus scan shown off to the side so it wouldn't get messed up during it's run.
 
I've had a lot of help from NASDAQ over in the Malware Log forums and we've run a bunch of scans but to no avail (the link is attached below):
http://www.bleepingcomputer.com/forums/t/577958/cursormouse-go-out-of-control-randomly-on-laptop/
 
Been through system restore, uninstalling the mouse, deactivating the touch pad, multiple virus searches... Read more

A:Touch Screen / Mouse out of Control

Hi Krooz,
 
I'm not an expert on this, but it seems similar to a problem that I've had with my Surface Pro 3.  If you live in a humid area, use evaporative cooling (swamp coolers), or accidentally leave the laptop in the bathroom while taking a hot shower,  moisture can get between the LCD and Digitizer assembly and create these "ghost touches" you are experiencing.  As you have mentioned the touches appear to be concentrated in the center line.  This could also be cause if you carry the laptop around by hand (like a book) and the pressure and friction (and sometimes sweat) from your arm can affect the screen.  
 
The way I have dealt with this before was to fold a large towel several times and place on a flat surface,  Prop the laptop with the back of the lid flat on the towels.  Take a hairdryer and carefully heat the screen to soften the adhesive between the screen and digitizer.  Then take a clean dry folded hand towel and with firm, but GENTLE pressure wipe from the middle of the screen outward.  Much like removing air bubbles from under a sticker.  Depending on how much moisture is trapped in the screen this may not work.  If this does not fix the issue, you could always go into Human Interface Devices in Device Manager and disable the HID-compliant touch screen, and just use it as a standard laptop.

16 more replies
Answer Match 66.36%

My touch screen clicks itself into the middle of the screen, uset to go into a HP window within the control panel to disable it but since upgrading to windows 7 (thinking it might solve it) the window has gone and now the beeps are driving me insane.

My computer is the IQ700 and I've upgraded from Vista home 32 bit to 7 home 32 bit.
 

More replies
Answer Match 66.36%

Please, somebody has been able to make this program run on Vx64?

I?m getting this error on start: "The Task Monitor Failed to Start. Please Reinstall uIce. The service has not started".

There is a file named TaskMon.dll on the install folder, but I dont have any clue about what can be wrong.

Help, please. I?ve tried everything. Reinstalling does not make any difference. Compatibility modes does not work. I need this program for my X-Fi. IMHO its the best i-r program.

Tnx in advance.

More replies
Answer Match 66.36%

I have Windows Media Center, and before my computer was reformatted, I had a remote that worked for my computer and Media Center, but now it isn't working. Not really sure how to get it to work. My infrared box picks up the signal, but it won't do anything on the computer.

More replies
Answer Match 65.52%

i have a medion md8833 pc about 3 years old. i did not use media centre until recently, but when i did the remote did work for me. after about a week i noticed it getting problematic, so i replaced the batteries and it was fine again for a few days. now it has stopped completely, and even new batteries do nothing for it. the light is not even coming on on it. the light did come on before but was problematic( it would only briefly light or light very dimly). does anyone have any ideas on what could be the problem. it has had very little use and has not been damaged in any obvious way
 

A:medion or24v vista remote control does not work

I'm sure the warranty is expired after three years, huh?

Perhaps it has reached the end of its life span. Check the connectors inside that touch the batteries. These connectors supply power to the unit. Some have springs and some are made of bendable metal. Make sure the metal contacts are making actual contact with the batteries. Sometimes pulling them outward is necessary.

Hope that helps!
 

2 more replies
Answer Match 65.52%

ive tried the trouble shooting it found multiple unown devices and a cpl that the system could not find the driver for, not sure what to do next?

More replies
Answer Match 65.1%

If I change things in my settings, my phone will freeze. If I turn glance screen on it will freeze. And at random times it just freezes while it's locked and it's kind of annoying. I really want to be able to use my glance screen and stuff on my phone that's cool but it freezes...will a hard reset fix it? Or anything at all can help my problem I would be grateful. Thank you

More replies
Answer Match 64.26%

Hello, I have a problem with connecting my SE K700i cell phone with Windows 7 notebook via bluetooth. I have paired them, file transfer is available, the problem is remote control (HID profile) - when trying to connect either desktop, presenter, kmplayer or any other, it always shows "Bluetooth connection failed. Retry?" I do not know what to do with that, with Vista it worked properly, the driver is the same, so what is the problem? Would be happy, if you could help me.

edit: the problem is in Windows - remote control does not work neither with another cell phone. It has Bluetooth Stack for Windows by Toshiba.

A:BT problem: Win7~cell phone-remote control doesn't work

Thx, I have already solved that - In BT settings an option of creating HID was hidden, it offered just dial up networking.

2 more replies
Answer Match 63.84%

I was thinking about it... Does such a universal device / adaptator exist, able to touch and write on every notebook screen?
Maybe a usb sensor / capacitator to put at the bottom of the screen , able to see pen movements and touches?

A:Universal stylus for non-touch notebooks

Originally Posted by Maurizio Troso I was thinking about it... Does such a universal device / adaptator exist, able to touch and write on every notebook screen?
Maybe a usb sensor / capacitator to put at the bottom of the screen , able to see pen movements and touches? are you sugesting that after seeing the mclaren phone videos?
I don't think that could work since there needs to be accuracy. Having a sensor at the top will not be able to gauge depth or accurate distance

3 more replies
Answer Match 63.84%

I have a labtop at home running xp pro with service pack 2 and all the latest updates from microsoft. I have activated all of the remote desktop features on the labtop. I am able to establish a connection from my home desktop as a test. However I am not able to establish a connection from any other computer outside of my house specificly my work computer. I also tried connecting from my friends computer witch is not connected to a server like my work computer. This test was unsuccessful. My set up at home---- I have a cable modem attached to a dlink router witch is unincrypted for open access and my desk top is wired to the router and the labtop is connected wirelessly. Remembering that the labtop is the one i want access to. I really want to know how to connect to my labtop from work. according to the microsoft site this is possibly. well what am i doing wrong.
 

A:remote desktop wont work

Do you have a static IP address on the computer?
Have you done the appropriate port mapping on the router to that IP address?

Information for how to configure the host can be found at:
http://www.onecomputerguy.com/networking/xp_remote_desktop_host.htm

Information for how to configure the client can be found at:
http://www.onecomputerguy.com/networking/xp_remote_desktop_client.htm
 

1 more replies
Answer Match 63.84%

Ive got two networked computers, i can netsend to them both, but when i try and remote shutdown by using shutdown -i and typing the name of the computer it will not work. If i click browse it says the directory service is currently unavailable. It will not work if i enter shutdown -m \\ and typing the name of the computer either. Any ideas on how I can get this to work?

A:Remote Shutdown wont work!

Have you tried it through the command prompt?

3 more replies
Answer Match 62.58%

my lap top
HP Pavilion TouchSmart 14-n033tx Ultrabook (ENERGY STAR)
Model #: F2C48PA
windows  8 64
delete windows and recovery and install windows 10 64
touch screen not work no drive found in web site hp
all vido in youtube see but not work
 
 

More replies
Answer Match 62.58%

I have an HP ENVY TouchSmart, Windows 8.1 and 64-bit operating system and yesterday my touch screen was working fine, and today I turn on my laptop and it doesn't work at all. Keyboard works fine, mouse works fine. everything but the touchscreen. I thought it could be complications from a very recent update but It was updated on the 17th. Under my system information it says, "Pen and Touch: No Pen or Touch Input is available for this display". I don't know if that's unusual. I've restarted it, and tried steps to fix the problem like "calibrate my screen" but i can't seem to find the settings to it. In my Device Manager settings, I can't seem to find anything relating to touchscreen software, if there is any? I take good care of my laptop but I don't know the first thing about it. There is no damage to it.  When troubleshooting Hardware and Devices, "The driver for eGalaxTouch EXC7910-1037-11.01.01 is not installed."...Problems found: eGalaxTouch EXC7910-1037-11.01.01 doesn't have a driver-Not fixed. Hardware changes might not have been detected-Detected. I've checked if anything neds to be updated. I dont know what to do from here. Is there anything that I need to install? 

More replies
Answer Match 62.58%

so heres the deal i have a imo touch screen that i use as a main screen (dummie) and when windows 7 uploads it doesnt show the windows symbol the screen is black until the windows startup sound comes on and the main destop comes up . is there a way i can change this in DOS so my usb touch screen will work before windows boots. i have a VGA flip down that i havent installed yet and i was hoping to get the touch screen to work in DOS

A:can a touch screen work in dos

OK, if I read that right, you are missing the Windows 7 Boot Animation. I'm not sure if these links will help but its some place to start.
No windows 7 boot animation
No boot animation for Windows 7? [Archive] - My Digital Life Forums
Oh, thats not DOS, there is no DOS in Windows 7. There is a command shell that you can launch from Windows but its not DOS. The first text based screen you see during boot up is the BIOS POST screen and or your Video cards BIOS screen.

7 more replies
Answer Match 62.58%

Hi,

Is there an inbuilt Windows 7 program available that will allow a screen share with a remote PC but can be configured so that the remote PC cannot have control of the host PC?


Rgds
Auld Bint

A:Screen Share Without Allowing Remote Control ?

I don't believe that you can configure Remote Desktop to only share a your screen.

There is a quite simple way to accomplish this though. You should use one of the programs that people use to broadcast live streams of gaming and/or tutorials. XFire includes the ability to send out a live stream of your desktop.

Here's a tutorial on using XFire to broadcast a live stream:

About Xfire Live Video

1 more replies
Answer Match 62.58%

i have a Media PC in my entertainment center i just setup. i then setup RDP which works great BUT it locks the Media PC and since it is connected to my TV i just want my RDP connection to be able to control the Media PC but still want to see the screen on my TV and cant figure how to not lock the screen when connected?
both machines are 8.1 Pro
thanks

More replies
Answer Match 62.16%

Can I ask about URC remotes on here?

Just spen an hour trying to find a site that can tell me where the LIST button to find the recorded items are for viewing.

Nothing on the ONE FOR ALL SITE so far as I can see and nothing in the manual.

Model is URC-7130. Just bought it - everything else set up fine, but no LIST button

Can anyone help please?
 

More replies
Answer Match 62.16%

My touch screen key board is working but my regular keyboard is noy workingI can't type from the key board

More replies
Answer Match 62.16%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 62.16%

The touchscreen on my Yoga 260 isin't working. I first noticed this problem when the screen was acting wierdly. When you tap on your yoga a light circle appears and fades over time to mark or show where you tapped and when you swipe a trail or tail appears behind of where you swiped then disappears over time. So when I opened my Yoga these taps and swipes were appearing all over the screen ramdomly in a very rapid pace. So I restarted my Yoga and saw that the swipes and taps were still there. So I chose to restart the Yoga again and the taps and swipes dissapered. After that I noticed that the touchscreen became unresponsive but the computer runs as normal butthe screen is unresponsive. Before I discovered the problem I could remember dropped the computer a small height but caught it. If there's a solution to this problem I'm happy to listen! Thanks. 

More replies
Answer Match 62.16%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 62.16%

Hi, i had my motherboard replaced due some manufacturing fault. When i got my laptop back it wasnīt working quite well so i decided to reinstal operating system. I used Backup button and restored my laptop to initial settings. This got me properly working laptop with win 8.1. Afrer i upgraded to win 10 my touch screen stoped working so i did a little research and found some topics with similar problems but any of those  didnīt solve my problem. ? This is screenshot of my deice manager, that unknown USB is my touch screen ( it says: unknown USB device (descriptor request failed)). I tried uninstal this driver, when i do that my touch screen starts working for like 3 seconds and than it stops working again. By the way this is rare to see box called HID in my device manager usually it doesnīt even show up. I tried update drivers through windows update. That didnīt change a thing so i update almost every driver manually (i download all of them from official lenovo support site) . And guess what, that did not worked eather. I am not sure which other solution i tried, because am trying to solve this problem for quite long time, but i feel like i tried everything (even reinstaling win 10) and didnīt even get close to solving this issue.Do you have some idea how to solve this problem?Sorry for grammar mistakes.

More replies
Answer Match 62.16%

any driver for touch screen can work on win 10 for acer_aZ5610

More replies
Answer Match 62.16%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 62.16%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 62.16%

Hi All,

First sorry if this is one of those disaster problems gone wild! But this one is puzzling me and im ussually happy to work through problems.

A freind of mine has a labtop and according to him he doesn't use it for much of nothing. But recently the labtop freezes as windows xp is at the loading screen. I saw it and it actually freezes within moments of the blue lines going across the screen in the little box.
Anyways, so I booted it in safe mode, now in safe mode theres no explorer bar at the bottom of the screen. used task manager to load explorer and it pops up for one second and dissappears.

Next, I went into msconfig and tried to check if there was anything in there that might trigger this affect. So I found two files which were called "[][][][].[][][]" im not sure how many boxes it made but I immediately unchecked those two. And I went on to uncheck a couple more like anti virus software and etc.

This time when it started up it actually went through pass the start up screen. He logged in for me and that started looking goood. But all of a sudden again no explorer bar and I could only work from task manager.

Hes running Windows XP on a P3 by the way. Anyways, if anyone has any ideas for me to try I would greatly appreciate it. What sucks to me the worse is, this is a labtop so I can't really use a bootdisk to help me tool wise.

I figure this may be some sick virus that I have no clue about cause im sure he doesnt update his Windows ... Read more

A:Explorer wont Work/Cant get into Control Panel

Have you performed the obvious; virus and spyware scans?

Explorer bar? Do you mean the Task Bar?
Task Bar Repair Tool
 

3 more replies
Answer Match 61.74%

Hi there,My mother cannot see her laptop screen as after windows logo it goes black (you can hear windows xp sound when it goes on) so pc works. The problem is that I am abroad and she don't have no-one who could help her, only me. Most of the tasks I done remotely using 'Teamviewer' as we know if the screen is black she cannot see the password, so I can't access it.Is there any way how to activate remote control for teamviewer or any other way? also my dad has his own laptop so perhaps there is a way how to connect his laptop screen to my mothers pc ?My mothers pc has windows xp and my dads pc - windows 8.1I believe the drivers are faulty isn't ?

A:How to activate remote control if laptop screen is black ?

problem is that she or someone around don't have any TV or external screen at all.. I have heard that it might be a laptop inverter problem.. but how to check if that it's the issue?she has Emachines e525 laptop.Today I told her to try safe mode, but still it's same screen goes off after couple sec.

2 more replies
Answer Match 61.74%

I have a HP touch screen running Vista.I ran malwarebites and it found a bunch. computer is running better but still cant get windows update to run it hangs and says the service has not been started.

Malwarebytes' Anti-Malware 1.41
Database version: 3221
Windows 6.0.6001 Service Pack 1

11/23/2009 10:03:30 PM
mbam-log-2009-11-23 (22-03-30).txt

Scan type: Full Scan (C:\|)
Objects scanned: 207514
Time elapsed: 1 hour(s), 3 minute(s), 21 second(s)

Memory Processes Infected: 2
Memory Modules Infected: 5
Registry Keys Infected: 141
Registry Values Infected: 9
Registry Data Items Infected: 0
Folders Infected: 13
Files Infected: 67

Memory Processes Infected:
C:\Program Files\MyWebSearch\bar\1.bin\M3SRCHMN.EXE (Adware.MyWebSearch) -> Unloaded process successfully.
C:\Program Files\MyWebSearch\bar\1.bin\MWSOEMON.EXE (Adware.MyWebSearch) -> Unloaded process successfully.

Memory Modules Infected:
C:\Program Files\MyWebSearch\bar\1.bin\F3HKSTUB.DLL (Adware.MyWebSearch) -> Delete on reboot.
C:\Program Files\MyWebSearch\bar\1.bin\MWSOESTB.DLL (Adware.MyWebSearch) -> Delete on reboot.
C:\Program Files\MyWebSearch\bar\1.bin\MWSBAR.DLL (Adware.MyWebSearch) -> Delete on reboot.
C:\Program Files\MyWebSearch\bar\1.bin\MWSSRCAS.DLL (Adware.MyWebSearch) -> Delete on reboot.
C:\Program Files\MyWebSearch\bar\1.bin\F3HTMLMU.DLL (Adware.MyWebSearch) -> Delete on reboot.

Registry Keys Infected:
HKEY_CLASSES_ROOT\TypeLib\{07b18ea0-a523-4961-b6bb-170de4475cca} (Adware.MyWe... Read more

A:Windows update wont run. Touch screen computer

6 more replies
Answer Match 61.74%

I was thinking of a way to control our media center PC with a remote so that we didn't have to have a keyboard and mouse constantly plugged in. Obviously, I could buy a windows media center remote and solve that problem (that is if it even works with XBMC). However, I found a cheaper remote and USB-Ir combo and decided to try that instead. Also, because the layout of the remote was rather plain, I decided to try using a universal remote we have in conjunction with the USB-Ir combo. I found a program called Girder that confirmed to me it is possible to get a random remote to work with the Ir receiver because the add remote function recognized one of the codes I entered into the remote. However, I'm finding it a little cumbersome to go any further with Girder. Obviously, I can make a keymap file to work with XBMC. However, as I started messing with the buttons, other Windows functions started happening. As such, is there a program out there that can help me reprogram the remote (from within windows, not by hacking the remote) so that it does only what I want it to do?
 

A:Reprograming a universal remote for a PC

Through much research, I have discovered that, no matter how you manage to connect a remote control to a PC, the PC will automatically map the remote control to the keyboard. As such, you cannot remap the remote without remapping the keyboard. There are plenty of applications available for anyone who is game enough to try and modify a remote at the binary level. However, the skill level required to use those programs makes it so that only programmers have a remote change (no pun intended) of remapping their remote without screwing up their keyboard. As such, in my opinion, just use the MCE remotes with WMC and buy a wireless controller (ex: XBOX 360) for XBMC. It's easier to map.
 

1 more replies
Answer Match 61.74%

I've been looking everywhere for this and nobody seems to know of anything. So I'll give it one more shot.

Would it be possible to have a USB IR-Receiver connect to a universal remote control? And have windows recognize the input of the remote for use in, say, VLAN or XBMC? I mean to map out commands so when you press "Play" on the remote it'll activate the "B" key in Windows which you've set VLAN hotkey so B begins to play? And Up, Down, Left & Right on the remote corresponds with Up, Down, Left & Right on the keyboard, and so forth?
 

A:Universal remote with Windows

I haven't seen any software or hardware that allows
the use of a universal remote on a computer.
There are plenty of media center remotes available though.
Ebay.
There are also mini wireless keyboards with trackballs for mouse function.
 

1 more replies
Answer Match 61.74%

I'm willing to spend to maybe $150.00. USB programable would be nice or some thing with good learn features.I hear logitech has a good one but not sure what model it would be.

any ideas?
 

A:Universal Remote Recomendations

12 more replies
Answer Match 61.74%

I've been looking everywhere for this and nobody seems to know of anything. So I'll give it one more shot.

Would it be possible to have a USB IR-Receiver connect to a universal remote control? And have windows recognize the input of the remote for use in, say, VLAN or XBMC? I mean to map out commands so when you press "Play" on the remote it'll activate the "B" key in Windows which you've set VLAN hotkey so B begins to play? And Up, Down, Left & Right on the remote corresponds with Up, Down, Left & Right on the keyboard, and so forth?
 

More replies
Answer Match 61.32%

My phone has a screen lock on it. So the phone boots up and reaches the screen lock part where I can go about unlocking it and doing whatever I will with my phone. however the screen wont respond to any touch. It is an Android and the phone is a Samsung intercept.

also... :/ 3 days ago I dropped in it a puddle. I've been drying it out for few days under weak heat from a heat lamp but I tried it yesterday and I had the problem mentioned above ^. any suggestions, or am I screwed?

Thanks,
Sprinter
 

A:Smartphone touch screen won't work after booting up

I'm afraid you will have to get a new phone. Who is your wireless provider?
 

4 more replies
Answer Match 61.32%

Hi Guys...I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)

I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?

A:Touch Screen doesn't work out of sleep

There is a registry patch for better USB connectivity after waking from sleep, available from Lenovo.

Lenovo Support & downloads - Registry patch to improve USB device detection on resume from sleep for Windows Vista - Notebooks

How's the touchscreen working for you? Hope it's great! I don't like touchscreens because the screen can heat up and flicking your finger around on it can really burn.

4 more replies
Answer Match 61.32%

Hi,My touch screen is disabled upon upgrading to Windows 10, I tried to uninstall HID Compliant touch screen from Device Manager then reboot, but still no luck. Anyone have found a fix? Thanks.

More replies
Answer Match 61.32%

Hey guys i'm pretty new to all this and have only just signed up to the forum so hope i have put this in the right place!!

Anyways i was wondering if an IR Touch panel that fits over the top of an ordinary LCD will work with windows 7 as i have seen one on eBay 32" in size (USB) Pic attached!

A:IR Touch Screen on eBay (Will it work with7)

Looking at the way he's treating it, I would be surprised if it worked at all.

5 more replies
Answer Match 61.32%

hello i heave a nettop mini pc and i have a 7" super sk-8802-a touch screen monitor. when i purhcased it from ebay the seller told me the drivers support windows 7 . i got it and it supports everything below xp and as well as xp. i rather see if i can get it to work rather than sending it back i heard that windows 7 has a xp mode so i can use the programs on windows 7. i found a driver for it from a website called touchkit.com but its a rar file. my thought is can i install the drivers regularly and then swap out the rar files. and help would be great.

A:my touch screen dont work .... bad drivers

If you can't get it to work I would send it back and get your money back. I wouldn't even play around with the guy he misled you and I wouldn't post a good deed done on his reputation. I have seen to many people get taken on Ebay and it ticks me off because I for one have had it done to me. I now by everything brand new from Newegg and or some place I know to be reputable.

Unrar the files to a folder on your desktop and open up device manager and right click on you new touch screen monitor and click update drivers. Then select "Browse My Computer for Driver Software" and then select "Search For Drivers In This Location" and Make sure the subfolders check box is checked and then browse to you folder and click ok then click next. It will either say it is updating the drivers ot that windows has determined that the best driver is already installed. If it says the later then try an Automatic update from windows update. Before you do though go into system in control panel and click the hardware tab and select the setings for "Device Installation Settings" and set it to these setting like below in the screenshot the go back into device manager and automatically update the drivers and it will search windows update as well to see if there are drivers available for your device.

9 more replies
Answer Match 61.32%

hi

i am running ATI control center version 2009 but cant get hot keys to work

they have been set up clone and extend from my monitor and tv

hot keys have been enabled but they still dont work

graphics card is hd 4770

does anyone have an tips

More replies
Answer Match 61.32%

Hello to the community. I am glad you all are here to help us less technologically savey folks.

ok. My computer was attacked the other day. I have Norton Antivirus and it seemed like it caught it. I did a full system scan again Norton caught some Trojan (witch caused the pop ups to stop) and told me to restart to complete the clean.

When I did I got this message in an error box.....

This file does not have a program associated with it for performing this task. Create an association in the Folder Options control panel.

I went to that option but have no idea how to "create an association". I also tryed to restart with the last known good configuration in the safe start menu. It did not work. Also when the error message came up the picture I have for my back ground goes away. Then when i hit OK on the error box I just have a blue back ground.

Do I still have a virus? Does anyone here know how to "create an association" for my control panel files? Oh yeah the task manager has been disabled by the administrater also. I have no idea how to do that so.

Hope to here from someone on this soon. and thanks again for this site.

Paul

A:Windows XP home Control Panel wont work.

Who is the administrator for this system? Who owns this system?

Louis

15 more replies
Answer Match 60.9%

Hi there,

I have a monitor, a LG M228WA, and a Humax HD Fox T2 Freeview box with a uniersal Humax remote.

I was wondering, does anyone know a three-digit code that will allow the universal Humax remote to work with the monitor?

With thanks,
DC.
 

A:Solved: LG Monitor & Universal Remote

I've never heard of a remote working with a monitor. What settings on it do you need to change from a remote?
 

2 more replies
Answer Match 60.9%

Sony RM-AX4000 Universal Remote

I waws thinking of picking one up and was wondering if any one had this and if you would recomed it?
 

More replies
Answer Match 60.48%

Hi HP Support Greetings from Latin America, we have a HP Pavillion All in one 27-n001la, mainly used by my 5 years old daughter, with all her educative games. Since the upgrade to Windows 10, touch screen is not longer "touch", and we cannot find driver available at the website to solve this issue, which btw, is quite relevant for my daughter as she still doesnt have any control of the mouse. Hope you can help us. Warm Regards from Chile Carolina

More replies
Answer Match 60.48%

chrome://flags only help until my yoga 700-11isk ideapad reboots the next time and the touch screen does not respond to scroll. 2 fingers.  anyone has a more permanent solution?

More replies
Answer Match 60.48%

I get a black screen (with backlight).No hard disk access,input output system does not work (It does not turn on/off CapsLk or NumLock).The CPU is not working! Only a long holding the power button turns off the computer.1) my OS installed from the Microsoft Download Center (?winver? into: release 1511,build number 10586,494)2) all drivers are updated from the support center Y700 Touch-15ISK Laptop (ideapad)   (including (ACPI) Driver.)3) I do not install any utility from Lenovo.4) I get a black screen when my laptop is connected to AC power and when running on battery power.5) Power plan is set up by default (Not Configured) 6) I never get problems in High performance mode with connection to AC power (Minimum processor state : Plugged in 100%). I attach my system log




Y700-15ISK Touch/BIOS: CDCN35WWi7-6700HQ/GTX 960M/(RAM) 16,0 /LITEON CV1-8B512

A:Y700 Touch-15ISK .Black screen.The CPU is not work...

You can press the novo buttonGet into the bios and set legacy boot up .And insect the Windows installion cd to fix

2 more replies
Answer Match 60.48%

Hello,

My wife's parents purchased a Toshiba Qosmio DX730 (PQQ11A model). They recently upgraded to Windows 8 and the touch screen now does not work.

The problem is missing drivers (the monitor driver is reporting as a Generic PnP Monitor).

I went to the Toshiba site and selected the driver downloads for the appropriate model and installed a number of drivers, including the recommended NVidia display drivers. There are no drivers on that site that seem to install support for the Toshiba touch screen monitor.

Are there no Windows 8 drivers available for this model? If not, is there another solution? If so, where can I find them. Any help very much appreciated as they have a nice computer and purchased Windows 8 so they could use it with the touch features.

Thanks.

A:Qosmio DX730 and Win8 - touch screen does not work

Hi

On the Toshiba EU driver page you can find the Win 8 drivers.
As far as I know you need to install the Toshiba display driver to get the touch function working properly.

I found this driver.
Please check if you can install this:
[Win 8 TouchScreen Software for Qosmio DX730|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=366&selProduct=7338&sel ShortMod=null&language=13&selOS=40&selType=all&yea rupload=&monthupload=&dayupload=&useDate=null&mode =allMachines&search=&action=search&macId=&country= all&selectedLanguage=13&type=all&page=1&ID=83418&O SID=-1&driverLanguage=42]

2 more replies
Answer Match 60.48%

Since windows 10 upgrade, my touch screen on my pc no longer works. How can I fix this problem? I had also upgraded my son's laptop and now his mouse doesn't work on his, it works is a mouse is plugged in but not without on either computer. I am confused!

A:Touch screen no longer work after upgrading to Windows 10

Head over to the system builder websites to download and install windows 10-compatible drivers for your machines.i_Xp/Vista/W7/W10 User

3 more replies
Answer Match 60.48%

Screen was cracked so I replaced the screen. Now touch doesn't work.
There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel. In PC info it says, "No pen or touch input is available for this display."
Touch DOES work on LINUX as I ran it from a usb drive, so it is not a hardware problem.
I have reinstalled Windows.
I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
How can I get the touch to work again?

A:Why doesn't my Touch work after replacing the screen on my Yoga 2 Pro?

try refreshing your PC maybe the driver is not working properly
If the touchscreen does show up on the device manager try updating the driver from there. (it will be listed under HID )
​Otherwise To refresh your PC Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)Tap or click Update and recovery, and then tap or click Recovery.Under Refresh your PC without affecting your files, tap or click Get started.Follow the instructions on the screen.

3 more replies
Answer Match 60.48%

i upgraded to windows 10, and surprise surprise my touch screen is gone.   no drivers, no hint of it anywhere on my pc settings,  i tried finding a link on HP's website to redownload the software, no such luck, you would think for such a common problem hp and microsoft would get there act together and provide a patch.  Any ideas anyone. thanks

More replies
Answer Match 60.48%

I bought a windows 8 hp pavilion touchsmart and touch screen worked. I updated to Windows 10 and it worked, only after I did a factory restore did it not work. I've tried everything with the device driver and another factory restore and it still does not work. I sent my computer in to get it fixed while it was under warranty and it was still not fixed. I resigned to it not working and I think that hp should have solved this problem before selling its computers. So we are blaming it on Microsoft 10, but that is not the issue when it worked until I did a factory restore and attempted everything suggested. I have a 350 dollar piece of **bleep**. Plus now my Mic isn't working and there aren't any drivers for me to upgrade to, anywhere.

More replies
Answer Match 60.48%

Hi,

I'm using Win 8.1 Pro. I want to use Microsoft Remote Control app on my Ipad to connect my PC (w Win8). Connection is ok, I can see my PC on the Ipad, but on my PC's screen the lockscreen will be visible. After the leaving the app I can't type my password
on my PC (return to normal use), I can see the textbox, PC doesn't accept any keyboard input. I have only one option, to restart the PC.

May I ask your help?

More replies
Answer Match 59.64%

I lost the factory remote, so I purchased a universal remote control, but both the auto search and manually entering the codes for HP televisions fail to control the monitor. Is this monitor compataible with tuniversal remotes?

A:HP Spectre 32 Studio Display universal remote programming

Hi there @gvent18?,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand you are having lost the remote. I will be glad to help you. I can not help you with third party devices. If you wish to purchase a new remote, You can go to HP Part Surfer and order replacement. Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.

2 more replies
Answer Match 59.64%

The ultra-sensitivity of my Dell laptop trackpad has driven me mad. How to reduce the sensitivity. I read forum advice that said go to control panel,mouse, and there will be a trak pad sensitivity adjustment. But..there was no adjustments for track pad on the mouse section. anyone know where it is??

Thank you!

More replies
Answer Match 58.8%

Hi,
In a big problem from few days. Suddenly Universal apps have stopped working. Whenever I click them, splash screen appears for few seconds and then goes away throwing an error "The remote procedure call failed". The icon of apps have gone from Start Menu. See Mail, Weather and Music.

Since yesterday, Weather was working. But today it has also been corrupted. I used sfc scan and DISM, both failed to solve some files problem. I don't want to create a new user account since I will have to reinstall apps. Can any one please help me out?

Maybe re-registring apps using Dism help. But i know there's a bug in November update which causes all apps to become corrupt. Hence I didn';t try it.

More replies
Answer Match 58.8%

I have the issue that the touch screen + front camera + back camera + windows button on the screen are not working.

I tried installing the display/graphics drivers but that did not helped.

I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country so i cant claim the warranty as well.

someone please sort out this issue and tell me the solution or tell me what i should do?

Help will be really appreciated.
some details about my laptop:

Toshiba Satellite U920T-B919.
windows 8.1 update 64 bit.

Thanks,

A:Satellite U920T - front/back cam + touch screen + win button doesn't work

Since you mentioned different issues with your notebook, I think that in this case its advisable to recover the notebook back to factory settings just to check if all these problems are related to system problem.

Regarding the webcam: the Windows 8 /8.1 already contains the webcam drivers and therefore additional webcam driver installation isn?t possible. Additional webcam driver does not exist simply.

From my point of few the whole description smells a little bit like a hardware problem of the upper slide part where the touchscreen is part of.
The win button as well as the both cams are located there and probably there is some lose connection between the two parts (touchscreen and keyboard)

Anyway, as I said above, its advisable to recover the notebook to factory settings just to ensure that the system isn?t the troublemaker.
In case of hardware problems, you would need to get in contact with service available in your country.

7 more replies
Answer Match 57.54%

Hello,

I have a Windows 7 network set up and whenever I connect remotely to another computer and lock their input such as their keyboard and mouse, the remote user still has the ability to press ctrl alt del, which then allows them to use their keyboard and mouse. My question is, is it possible to disable the ctrl alt del functionality in Windows 7 so that that Blue security screen does not appear? I have tried lots of remote desktop controlling software which has the option to lock the remote computer input, but they still can press ctrl alt del and unlock their keyboard and mouse. How do I stop this? Thanks!

Best regards,

Jerry
 

A:Solved: Remote Desktop Control ends when remote user presses ctrl alt del

Let's try the Symantec Pc Anywhere.This a very Useful software for remote desktop sharing and file transfer and there is the locking feature...
 

1 more replies
Answer Match 57.12%

I have a hp Envy 15 notebook PC windows 10. my screen brightness control button (F2,F3) don't work now they use to, and I am unable to alter them with the control panel.

A:my screen brightness control buttons don't work

Hi, Can you post back with the full Model No. and Product No. of your notebook - you can usually get this by holding down the fn key and pressing esc, otherwise see Here for a guide on locating this information. Regards, DP-K

1 more replies
Answer Match 56.28%

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

2 more replies
Answer Match 56.28%

Through out the day, I have my computer on. Many times... whether I am using the computer at that moment, or if I leave and come back later... my screen will be frozen. The mouse moves, but nothing on the screen can be clicked. Also, control alt delete works as well, so I have found that if I go into the applications tab and open a new task and open/refresh "explorer" everything will start working again. So there is a work around, but it gets a little frustrating. Any ideas about why this would be happening?

I have recently built my computer... Windows XP... this has been hapening for about 1 1/2 weeks now. Thanks!
 

A:Screen freeze... mouse and Control Alt Delete Still work

bplantman said:

Through out the day, I have my computer on. Many times... whether I am using the computer at that moment, or if I leave and come back later... my screen will be frozen. The mouse moves, but nothing on the screen can be clicked. Also, control alt delete works as well, so I have found that if I go into the applications tab and open a new task and open/refresh "explorer" everything will start working again. So there is a work around, but it gets a little frustrating. Any ideas about why this would be happening?

I have recently built my computer... Windows XP... this has been hapening for about 1 1/2 weeks now. Thanks!Click to expand...
welcome to the forums
Maybe its just hanging up because you leave it sitting so long. Have you thought about letting it go standby when it sits for say ten minutes? Then when you come back and touch the mouse, it picks up right where you left off. To do that, right click anywhere clear on your desktop and select properties, select screensaver,then select power settings, then you can set it to turn off monitor after five or ten minutes, my hard drives are set for never turn off and system you can set for whatever you want, I am set for standby after 15 minutes...doc

 

2 more replies
Answer Match 56.28%

brightness control not work I have upgraded the N148 windows 7 to windows 8 ..how to fix ..please help me

More replies
Answer Match 55.86%

Downloaded and installed today. This is all that happens when it is opened. Network connection is OK. Ideas?



http://www.tenforums.com/attachment....1&d=1458400235

More replies
Answer Match 55.44%

I can't use my Control with any other key to copy, cut, paste, or
bring up task manager.

Help please and thanks, Mary

Here is my hijackthis text file.
 

A:Control/C Control/V control/alter/delete doesn't work

Mary, keyboard problems are not invariably software or malware-related. First things first - what OS are you talking about ? XP, Win 7, Win 8 or what? What type of keyboard is it? PS2, USB or wireless?

Disconnect it and reconnect it a few times, reboot and try again. Turn the keyboard upside down, placing one end on the edge of a thick book, and thump a few times on the back with your hand. Sweep the crud onto the carpet.....

Is it just a keyboard hardware problem, and if so which keys? http://windows.microsoft.com/en-gb/windows/keyboard-shortcuts#keyboard-shortcuts=windows-7 tells you a lot of key combinations with ctrl and shift and alt. Tell us if any or none work?

Open a document and try typing a bit of text. Do all the characters work?

If it appears the keyboard is faulty, can you borrow another to test?

Quite often, keyboard problems are down to wireless problems: and can often be solved by re-installing the keyboard driver.
 

2 more replies
Answer Match 55.02%

Im sorry for the legnth of this, but i tried to put step by step what ive done so far as to give you a better picture.
Ok, i should start by saying I just resently did a Hard drive swap, and this is when this problem started. After the HD swap everything seems to work perfect.. except this.

I noticed when i went to watch a movie on my Xbox (streamed from wmp) that it now says, Lost connection to Computer.

So i opened up Windows Media Player and went to select Media Sharing and click ok, and it just freezes there for about 10-15 seconds then unfreezes and nothing happens. A fairly common problem, ive found, as i researched possible solutions.

The first advice i got was to go into my Administrative Tools (from control panel) then go to Services. First they say to check your SSDP Discovery Service and make sure its set to Automatic, and that the service is started. Ok fine,

Then scroll down my services further to Universal Plug and Play Device Host. Do the same, set it to auto, and start the service. However when i try to start the service it comes up with this.

"The Universal Plug and Play Device Host service on Local Computer was started then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service."

So i thought, ok i guess that sounds fine.

Then lastly, in the services, i also was told to scroll down further untill i got to Windows Media Player Network Sharing Service. Go into it, set it to ... Read more

More replies
Answer Match 55.02%

My granddaughter is having a strange problem with this game. When it gets loaded, the cursor won't move to the left side of the screen. It will go to about 1 inch from the left edge then won't move any further. She can move up and down just fine and to the right all the way to the edge, but it won't move to the left edge so she cannot use any of the buttons on the left edge, or leave the game by using the exit button.

My computer is as follows:

OS Win XP Home w/SP2
DirectX 9
Intel Pentium 4HT, 2800 MHz
RAM 1024 MB
Video Adapter RADEON 9200 (128 MB)

Don't know what else might be pertinent

Thanks for any help.
Peg
 

A:Luxury Liner Tycoon cursor problem

Try making adjustments to the screen resolution within Settings of Windows. It should normally adjust itself but could be running into some bizarre complications. It almost sounds like the game is adjusting the desktop, but not properly fitting it to the screen. Try changing between 640X480, 800X600, 1024X768, and try changing the colour quality for each resolution.
 

1 more replies
Answer Match 55.02%

Hi I have a HP laptop and suddenly when I try to turn the computer on all the buttoms ligth up, like the dvd forward play the ligth for the hard drive the ligth for the wireless and all the ligths get turned on but on the screen can't see any thing not even a little words or testing memory or any thing seams like dead but all ligths are turned on
any ideas
the laptop is a HP Pavilion tx1000us

A:screen wont work

Hello cgrios,

If possible hook the laptop to a monitor and test to see if you have video.

2 more replies
Answer Match 54.6%

My Ideapad S415 touch screen has suddenly stopped working.  I've had a tech connect to my PC and try a BIOS reload of default settings, plus unistalling all "HID" devices in Device Manager with no resolution.  I've also tried a system restore with no luck. The system properties does see the touch capability. Suggestions? Thanks.










Solved!
Go to Solution.

A:Ideapad S415 Touch - touch screen stopped working

hi Hersh,
 
Welcome to Lenovo Community Forums!
 
First do a Power Drain 
     (If the battery is removable)
            Remove AC and Battery and hold the power button down for 15 sec.
               Turn the computer back on and see if the Touch capability is now detected under System Properties,
                  If not
         I suggest you contact Lenovo Technical Team about the Issue as this may be a device detection issue.
       Lenovo Technical Team
 
Regards
Solid Cruver



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 54.18%

i went to YouTube and did all they told me to do but i think when i went to drivers and then device manager i accidentally uninstalled something i wasn't supposed to.. can someone help
 

A:project my screen wont work

what windows version ?
is this a laptop or a desktop
what happens , when you start the PC on the screen ?

you maybe able to get safe mode to work - usually you tap F8 as the pc starts - but not if Windows 10
 

1 more replies
Answer Match 54.18%

had this issue once before when i installed a wireless mouse, do not recall the exact fix, but i have goggled and check all program conflict possibilities..none exist that i can find.
the posts that i can find here are quite dated.

This is a Gearhead optical wireless nano mouse model mp2600BLU their support claims it is plug and play no additioanl driver is needed.
The problem seems to have started after i replaced the batteries in it.
XPpro SP3 fully updated.

any ideas?

A:screen saver wont work

The screen saver does not start after you install a wireless pointing device

17 more replies
Answer Match 54.18%

I'm working on a Yoga 11s (20246). Someone broke the screen so they purchased a new assembly based off of the LCD part number and installed it. Unfortunately it did not work so they brought it to me. I got on the Lenovo Parts section of the website and found 2 part numbers for the LCD: 18201138 - AUO B116XAT02.0 2B HD G W NB LCD(W/ASF)90400129 - VIUU4 LCD Module W/Frame Without any means to know which one was correct I ordered the first one. I'm not sure what the difference is, even after looking at the photos as they both utilize the same LCD. When it arrived I installed it and had the same exact problem. The screen backlight turns on, but the only thing it displays is verticle white lines that seem to fade in the longer its on.  Here is the weird part though. I've tested the laptop by using a different LCD. Its 15", but uses the same connector and it works just fine. I also found out that if I boot with the larger monitor, put the comptuer to sleep, and then connect the LCD I ordered it works until I restart my computer. One other odd thing I noticed is that with the one I ordered and an external monitor it will only display 1024x768 and wont let me change it anywhere. When I start it with the larger monitor it displays 1366x768 even after switching to the "correct" LCD.  I've also ordered a new cable to ensure thats not what is causing the issue but it had no effect. The only other thing I can think to do is order the ... Read more

More replies
Answer Match 54.18%

The touchscreen stopped working suddenly on my Envy TouchSmart Sleekbook 4-1115dx. At first i though it was like a normal failure and that will get fixed by turning the pc off or restarting so I did not pay attention to it until now that I had restart my pc multiple times. Currently running win10. I started to believe it was because of an update a few days ago since it was when the problem started but all drivers and everything is up to date. I have checked for the HID-compliant Touch Screen driver and had to  show hidden divices in order to find it. I cannot enable it and when i check in the properties the following message displays: "Currently, this hardware device is not connected to the computer. (Code 45)To fix this problem, reconnect this hardware device to the computer." I have no idea on how to connect or how it got disconnected. I come from a similar thread but did not solve my problem. I have been researching this for hours and have not found and answer. Help please! 

More replies
Answer Match 54.18%

Hey everybody, I just received my P40 last week as a replacement for another Lenovo device. So far, everything seems to work fine with one exception: When I turn the screen over to the "tablet position", the touch screen and the touch pen show erroneous behaviour.a) As soon as I make the first input with the touch pen, I cannot make any further input with my finger, so the touch input is simply turned off. The Windows setting to ignore touch input when the stylus is used is not active.b) When I try to tap buttons at certain areas of the screen, especially at the upper edge, the cursor of the stylus starts jumping around and shows up at the lower edge of the screen. That means that when I for example tap on the "X" symbol in the upper right corner to close a window, I actually click on some of the symbols in the system tray in the lower right corner. This problem stops occuring as soon as the angle between the two case parts (screen and keyboard) reaches/exceeds approx. 40°. It does not matter if Windows is in "Tablet" or "Desktop" Mode. I already tried to manually install another Wacom driver mentioned at https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Wacom-Tablet-Service-for-ISD-Driver-Win... and https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P40-Yoga-issues/td-p/3293985. I had no luck trying driver versions 7.3.3.12, 7.3.4.8 and 7.3.4.13. I would really appreciate your help since this issue makes working in the tablet position... Read more

More replies
Answer Match 54.18%

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

1 more replies
Answer Match 54.18%

Hello everyone, my touch screen on my lenovo ideapad z400 touch is not working anymore.  The only weird thing I remember is some ghost touchpoint on my screen. I've been looking for the answer to this issue, but it seems that Lenovo does not address this problem.  If someone has found the solution to this problem and wants to share it with me, I will be forever grateful.  

A:IdeaPad z400 Touch - Touch screen not working

I facing the same situation right now. any solution please. left side of monitor is being "touched"?

1 more replies
Answer Match 54.18%

I want to buy this mouse to better work with my laptop.
Can somebody give me some feedback on how this glas pane works instead of a scrollwheel? Handling, etc.

A:Logitech Touch Mouse 400 for a Laptop with no touch screen

Sorry I can't answer your question, but this post piqued my interest. I use the Logitech 620 touch mouse on a Windows 7 box at work. I find a little touchy and has to tweaked. But I haven't tried the 620 on Windows 8. Because I'm always looking for the perfect mouse, I think I might just pick up the 400 tonight and let you know.

1 more replies
Answer Match 54.18%

Hello, My Thinkpad Yoga is connected to a large display through ThenkPad docking station.  Its lid is closed.   During my work, from time to time I see random touch clicks on my screen, and random opening of menus.  It is clear that the touch screen is active although the lid is closed.  When I open the lid, and still connected just to the 2nd display (large screen) display the phenomena stops.  Worth noting is that although only the 2nd display shows an image, the laptop touch screen is still sensetive to touch.  This is I guess why the random touches show up on the screen -- it feels the keyboard not fingers. I expect the touch screen to be disabled while the lid is closed or when projecting only to the 2nd screen.  The solution of opening the lid while connected to the docking station is not acceptable.  Lenovo's local support suggestion to disable touch for the Yoga is also not acceptable -- people purchase Yoga to get Touch.   A solution please! Yaron

A:Yoga touch screen generates random touch while lid...

I am experiencing the very same thing.A driver/BIOS update would be very much appreciated, dear Lenovo.

9 more replies
Answer Match 54.18%

Yesterday I was on my laptop and before I shut it down it went into what looked like a different mode. I booted it up this morning and it is still in this mode. It looks like touch screen mode but I do not have a touch screen.  The icons on the task bar are spaced out and there is a back button on the task bar too which is not normally there. When i right click against the task bar, one of the buttons says "Show touch keyboard button".  All of my files are spead out as if to have room for touching if I had a touch screen but I do not. I am finding this very annoying because I cannot get onto my desktop properly and is not in the right mode. Please help! 

More replies
Answer Match 54.18%

Hello guys,

Can 9.5mm Universal SATA 2nd HDD SSD Hard Drive Caddy work on Lenovo Laptop G510 ?

Regards.

A:9.5mm Universal SATA Hard Drive Caddy work ?

Don't know why it wouldn't. Most laptop cd/dvd drives can be removed and caddy put in.
Lenova specifically? Not 100% but no reason it not.

4 more replies