Tech Problem Aggregator

Can I get printed user guide for Epson 4490?

Q: Can I get printed user guide for Epson 4490?

Greetings, I just purchased an Epson 4490 photo scanner and realized there is no printed user manual- just a very basic bunch of directions. They have an in depth guide on the Epson website but it is not an easy one to download and copy, and I find it very difficult to look online whenever I have a question about using this scanner.
I am wondering if there is anyplace I can get the in-depth printed user guide for this scanner. Printed guides are so much easier for some of us to use. If I had known there was no user guide I would never have purchased this scanner.I am hoping that someone other than Epson might print them,since Epson says they have no printed user guide. Thank you!!

A: Can I get printed user guide for Epson 4490?

I doubt you would find a printed version available if epson doesn't have it.
The online manuals are usually in PDF format and you can save them
to your computer so you don't have to download it every time.
Just download and open it,then click file/save as and save it to your desktop.
Of course,after that,if you want to waste the ink,you can always print it out yourself.

2 more replies
Answer Match 81.48%

I have had windows 10 installed but can't see list of programmes when I want to find my Epson 4490 scanner to use it? How do I install a shortcut to do this?

More replies
Answer Match 80.64%

I have a Epson Perfection 4490 Photo Scanner and I bought a new pc with windows 7 home edition on it. I pressed the "copy" button on the scanner, and I got a response "failed to copy". I wrote Epson, and they told me they don't have drivers for this to work for windows 7 and that I may have to get "third party" to make this work. Everything else on the scanner works, except the copy button on the scanner to send the scan object to my laser P2015 laser jet. Epson has not replied to my latest answer to them on "Why isn't there a fix for windows 7 for this to work?".

Does anyone know of free softward that will make this scanner "copy" from it to a printer. I don't know why epson hasn't got this yet, I think that's unfortunate that a big company like them don't have a patch / driver for windows 7.

Thanks
 

A:Solved: Epson Perfection 4490 Photo Scanner

Seems a little strange that Epson would leave out one item. I have found new drivers for 32 and 64 bit Windows 7. http://www.epson.com/cgi-bin/Store/...V_UseBVCookie=yes&oid=70504&infoType=Overview. I would uninstall the old ones and then install the new ones. If it still does not work then scan the item into a photo program and then send it to print. I know it's extra steps but it gets the job done. I doubt that anyone other than Epson is going to make drivers for your machine.

Wait a minute I found this at http://driverscollection.com/?H=Perfection 4490&By=Epson 4490&By=Epson. Of course they could be the same driver package that Epson offers. The other sites I found all appear to be sites with drivers pre Windows 7.
 

3 more replies
Answer Match 77.7%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 64.68%

Hi, I've started getting a strange 'pale' line or banding down the very left side of my printed photos. I first noticed it on a night shot (see link below) and then on the other one link below, a daytime one.

All the ink cartridges are full or almost full and I've done nozzle check and head cleaning. It doesn't show up on a greyscale B&W print I did (or at least not that I could notice).

It's on the leading edge, the part of the image being printed first when using the full size paper eg. A4, 10x15cm.

On a whim while writing this I just tried printing a 7"x5" image in the middle of a sheet of A4 and there was NO banding. Same result with a margin of 2cm rather than the default 0.5cm.
With the 0.5cm default margin, it's like whatever is going on only affects the next 0.5cm of the paper (the first 0.5cm of the printed image).

Is this a paper-feed thing then?
Any ideas how to solve it to avoid wasting lots of paper?
Other than this the printer, whilst old, is still very good

Thanks.

Genuine Epson Inks TO481-6

https://www.flickr.com/photos/cjs696...n/photostream/
https://www.flickr.com/photos/cjs6969/15842139731/

A:Epson Photo R300 - single thin banding-line on left side if printed photos

Tried to realign your cartridges?

2 more replies
Answer Match 58.38%

I just bought a new Chromebook 100S 11IBY aka 80QN0009US. I've registered it, created a gmail acct, etc. As directed, I've gone to the support page to enter the serial number and thus verify my warranty.  All looks fine -- the upper RH corner of the page confirms that I'm in the US and speaking English. Then I click the User Guide icon and get:Yesterday -- I only could only get Polish- or Czech-language manuals.Last night -- I saw Russian once and Arabic once.Today -- the one-and-only default is the German "Benutzerhandbuch."  I can read a little  German -- so now I have the first inkling of the contents of this UserGuide.I got some really patient help from a technician in the Tech Service Dept -- but he was stumped, too. I even downloaded the "Hardware Maintenance Manual" just because it's in English.... I've been persistent in Googling for it.  TIA for any suggestions on where to find it.

More replies
Answer Match 53.76%

Just bought this notebook but can't find the User Guide.  And some of the key legends are wrong, e.g. @ is above 2 which shows " and can't find the hash anywhere.  How can I get the keys to perform what they show?

More replies
Answer Match 53.76%

where can i downlaod pdfs or ebooks tha tcan teach me how to use the internet - url, browsing hypertext aswel as teach it to a group of students
 

A:user guide

Hi ranger1,
Are any of these at BleepingComputer of any use to you? I think there are about 6 pages of list of tutorials.

http://www.bleepingcomputer.com/tutorials/

Richard.
 

2 more replies
Answer Match 53.76%

Does anyone know where I can download the Microsoft Dynamics CRM 3.0 User Guide? I can't find one anywhere. There's an Implementation Guide available for 3.0, but everything else is for 4.0 which I don't have... yet.

Thanks!
 

A:CRM user guide?

I guess you've already Googled it but, perhaps this?
 

2 more replies
Answer Match 53.76%

I would like to be able to download a user guide for an Inspirion 3455. Sure could use some help,  Thankyou

A:User guide

All the ones we wrote are listed here.

1 more replies
Answer Match 53.34%

Wher can i find Sigmatel High Definition Audio Driver user manual?
 

More replies
Answer Match 53.34%

I am trying to figure out how to add the user guide to EMET so that the Help -> User Guide...  opens the user guide.
I have the guide downloaded and I tried copying it to the same directory that EMET is installed to, leaving the default download name of the guide as "EMET 5 5 User's Guide.pdf" but that didn't do it (I was just taking a shot in the dark on that)
I did RTFM and I was unable to locate that in the manual itself.
I tried running the wizard, hoping it would download it, that didn't do it. 
I did locate the "EMET_Users'sGuideLink.txt" file but it doesn't really help with this part.
Thanks!


Portland Public Schools / Systems Administrator II

More replies
Answer Match 53.34%

Hi

I bought an advent 4490 netbook, refurbished from pc world.

It is meant to have xp on it however i got no discs or information with it.

When i switch it on it goes onto a black screen and says

FILE: \BOOT\BCD

I have phoned the tech guys and they cant help because it is meant ot have a built in recovery however i am not able to access this. I have tried all the other options available when starting up and nothing works

Any ideas????

Thanks

A:advent 4490

I'd return it to them and let them sort it out.

3 more replies
Answer Match 52.92%

The following is the closest thing I could find to a PDF reference manual or user guide for Internet Explorer 8 (IE8). Although it describes the Beta 2 release of IE8, from a user's viewpoint, the document seems to accurately describe the final release of IE8. It contains detailed, comprehensive descriptions of not only the "whats", but also the "whys", accompanied with numerous screen snapshots.Additionally, pages 84-86 (as labelled in the Adobe PDF Reader), or pages 81-83 (as printed in the document itself), contain a tabular feature-by-feature comparison between IE7, IE8 and Firefox 3.01."Internet Explorer 8 Beta 2 Evaluators? Guide":http://download.microsoft.com/download/9/7...August%2008.pdf

More replies
Answer Match 52.92%

My PC ia a Packard Bell Imedia 1459. I seem to have lost or am unable to open the Packard Bell info Centre User Guide programme. I have followed Packard Bell's instructions per user manual to reinstall but this doesn't work. Ihad to recove my machine for a completely different reason and discovered accidentally that it had returned. However, it has since disappeared again. Has anyone had this problem? Is there any other way of restoring this program without completely recovering the machine again? I am reluctant to do so as its somewhat laborious and because several other programs will need to be reinstalled after recovery. It's a job!!

Thanks
Winslowe
 

More replies
Answer Match 52.92%

I am a new Windows 7 user and would welcome your comments as to what user guide would be of service, e.g., Windows 7 QuickSteps by Matthews, Windows 7 for dummies by Andy Rathbone, etc.Thanks in advance for your suggestions,Grover Hughes

A:Windows 7 user guide comparison

I never read a user guide as I usually figure out how to work things pretty quick but the dummies books are usually pretty good. You might want to make a google search for Windows 7 Book Reviews.

9 more replies
Answer Match 52.92%
A:I need a very user-friendly guide on how to put together a computer.

a bit old but should help
http://www.dansdata.com/buildpc.htm
http://tomshardware.co.uk/2002/09/18/building_your_own_pc/index.html
 

1 more replies
Answer Match 52.92%

Needing help on figuring out how to use my Creative PC-CAM 350. Any help given would be great. Thanks...
 

A:User guide info needed....

Any more infomation? Just want to use it? Give up some more details about what has been attempted and what has failed. What are your system specs?
Generally too much information is still not enough

BTW
:wave:Welcome to TechSpot:wave:
 

4 more replies
Answer Match 52.92%

Hello,

I'm not one for getting stuck with hardware that much unless it's beyound my scope of knowledge which is very rare. I have just pruchased a Collermaster COOLDRIVE 4 and even I'm stuck with the lame excuse for a user manual. Does anybody now if the senors and the power source for the fans are inconjunction with, for example:

Fan1 Fan2 Fan3 Fa4 and the pins to the left of the Power Source looking at it from inside are in the same order. Because there is no notification to whether or not these are in order the same as the fans. I have never seen such a poor so called user manual in my life. It does not ell me anything at all.

Can anybody help please.

Look at the link and you will see what I mean. http://www.ixbt.com/power/case/photos/coolermaster/1000/cd4_back.jpg
 

A:Coolermaster CoolDrive 4 User Guide

I think I worked it out, it's confusing because the fan for the caddy uses the same socket as the 4 power sockets, and by default the fan is in FAN2 and Sensor2 so the rest will be determined to which socket I used inline with the sensor.
 

1 more replies
Answer Match 52.08%

Hello,

I just picked up an IBM P202 Monitor to connect with my father's PC 300PL.

The monitor has 2 video input connections on the rear. It seems that I'm in need of the IBM User Guide for this unit via the FTP site, but I've been unable to locate it. IBM support merely lists FRU parts.

IBM 21" Monitor P202 P/N 655843N

Any assistance would be greatly appreciated.


Thanks, Reacher
 

A:Need link to IBM P202 Monitor User guide

Got it now, disregard post

finally found it,
 

1 more replies
Answer Match 52.08%

Help file containing detailed info

How to install and activate eset

How to use eset product and tools available in it

Explaining user interface and meaning of various alert messages

Configuring Eset settings

ESET NOD32 Antivirus 8

Online help file : https://help.eset.com/eav/8/en-US/
User guide : http://download.eset.com/manuals/eset_ess_8_userguide_enu.pdf
ESET Smart Security 8

Online help file : https://help.eset.com/ess/8/en-US/
User guide : http://download.eset.com/manuals/eset_ess_8_userguide_enu.pdf
ESET NOD32 Antivirus 7
User guide : http://download.eset.com/manuals/eset_eav_7_userguide_enu.pdf

ESET Smart Security 7
User guide : User guide : http://download.eset.com/manuals/eset_ess_7_userguide_enu.pdf
 

More replies
Answer Match 52.08%

Hi,

New guy to these forums.

I just acquired a used inverter for my van, to support my laptop,
and a printer. Unfortunately it did not come with a user guide,
or any other manual. It is also without the cables. Does anyone have
a copy of user guide/manual for this, or know where I might obtain one ?
This inverter is 1,000 watts, with 3,000 watts surge. The cables are just
the correct gauge wire, with ring terminals on both ends - I'm not sure
what gauge wire should be used - perhaps 10 gauge, or even 8 ?

Appreciate any assistance.

Rich
 

A:User guide - AC Delco Inverter (#59-210U)

Welcome to TSG!

A laptop is between 65-95 watts most often, so 1000W is a bit of an overkill.

Something to keep in mind if you think you might use the full capacity:

1000W at 12 V is 83 amps, assuming 100% efficiency. At 80% you're looking at 103 amps, with 300 amps during a 3000 W Surge.
Note that efficiency at low loads can be a lot worse.

I'd be looking at 6 or 4 gauge wire, or larger depending on the length of the connection. If you are 10 ft from the battery, 6 gauge wire at 100 amps will have a voltage drop of approx 0.4 volts per wire, so you'll lose 0.8 volts. * gauge wire will lose 0.62 volts per wire, or a 1.24 V drop.

See this table for current capacities of AWG wiring.

You can contact Delco by phone or email from their Contact Us page.

And keep in mind that even though your equipment may only draw 100-200 Watts, a partial short on one of the AC cords could draw the full 1000 W, but not be enough to trip any over current protection. If you wire it planning on only 200 W, you could end up with fried wires. The heaver wire is pretty cheap insurance.

If connected to a fused circuit, say 20-30 amps, you'd only have to allow for that current as a maximum.
HTH

Jerry
 

1 more replies
Answer Match 52.08%

Quote:




Microsoft rolls out the official guide for the new OS

Windows 10 Preview rolled out last week with a plethora of new features, including a Start menu and multiple desktops, and Microsoft has already offered a detailed blog post and videos to demonstrate some of these improvements.

And still, as is the case with all the other products unveiled by the Redmond-based tech giant, the company also provides adopters with a user guide to detail features included in the release, thus making sure that everyone actually manages to explore all its improvements with ease.

The official Windows 10 Preview user guide is now available for download ( PDF viewer required) and comes with quite a lot of details about what's included in this testing version of the operating system, while also providing us with a quick glimpse of the Windows Insider Program that was launched last week.

Basically, experienced users, who are pretty much the only ones who should install the preview version of Windows 10, already know which feature is which in the OS, so this guide shouldn't make too much of a difference.




Download the Windows 10 Preview User Guide - Softpedia

More replies
Answer Match 52.08%

User guide for SecureAnywhere Internet Security Plus, Internet Security Complete, AntiVirus version 8

install & create account
Scan for malware
manage various shields
using firewall
manage quarantine, passwords, identity protection, backup & sync
using advanced tools
How to do settings
Download link

http://download.webroot.com/WSAUserGuide_PC_8.0.2.pdf

Online user guide

http://live.webrootanywhere.com/content/1332/Webroot-SecureAnywhere-for-PC-Overview

 

A:Webroot SecureAnywhere version 8 PC User Guide

+
http://www.webroot.com/En_US/SecureAnywhere/PC/WSA_PC_Help.htm
Knowledge Base Articles
https://community.webroot.com/t5/tkb/communitypage#.UxhTtR_CNjs
URL Reputation Change Request
http://www.brightcloud.com/tools/change-request-url-reputation.php
Account help
http://live.webrootanywhere.com/content/632/Opening-Page
 

1 more replies
Answer Match 52.08%

It would be nice to download a pdf with all the basic Win 8 instructions in plain language. Where do I find that on the web?

A:Where do I find a good Win 8 User Guide online?

There are two available from Microsoft. One for home users, one for IT administrators.

FREE eBook: Windows 8 for IT Pros (Updated - Final Copy) - IT Pros ROCK! at Microsoft - Site Home - TechNet Blogs

Dell | Windows 8 for Dummies E-book

4 more replies
Answer Match 52.08%

My advent 4490 notebook wont start up. It's been working great for over 6 months now it wont start at all its dead. No lights, no noise, no pictures it wont even charge.
 

More replies
Answer Match 51.66%

My computer popped up this virus last night and I've been reading everything I can trying to figure out how to fix it. I tried the self help guide and I get stuck because when I'm in safe. Ode, it won't connect to the Internet (connects fine in normal mode). However, when I check my connections, it says I'm connected so I'm not sure what's going on. D I need Internet access in safe mode to fix this, or can I download the RKill program onto my iPad, transfer it to Dropbox and then open it from there in safe mode? I am horrible with computers and almost in tears over here. I do all my work on this computer and I can't do anything right now and I'm super frustrated. Hoping some kind soul can help me out with this.

Thanks!
Melissa

A:Computer infected with SMART HDD - tried user guide and get stuck

Hello and Welcome to Bleeping Computer!!My name is Gringo and I'll be glad to help you with your computer problems.I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At t... Read more

43 more replies
Answer Match 51.66%

My XPS15 9550 laptop today installed considerable updates that took much of an hour to finish.  Upon completion selecting the Dell Premier Color shortcut icon for premiercolor.exe, it no longer brings up a window as it used to.  I can still go into control panel Display then drill down several levels to get at advanced color settings.  So tried to find online a guide for using this but could not find anything after considerable searching.  Much Dell ad info about how it is useful and users with issues that makes finding real help like a needle in a haystack.  The System Info SW info shows the process running from start up.  Version shows 2.0.199.0
What I would like to read is user guide information for using the program.

More replies
Answer Match 51.66%

I have been unable to find a user guide or an details on what Blocking Untrusted Fonts does in EMET 5.5.  In the details it states "Prevent loading of font files installed outside the system fonts directory." Is this as simple as blocking
access to all .FON, .OTF, .TTC, & .TTF files that don't come from %systemroot%\fonts ?

More replies
Answer Match 51.66%

A power user's guide to the Windows 8 Consumer Preview








By Ed Bott
April 5, 2012, 5:55am PDT


Summary: The more I use Windows 8, the more I like it. In this post, and the accompanying gallery. I want to share some of the small but useful hidden shortcuts, surprises, and secrets that only reveal themselves when you roll up your sleeves and use the new OS every day.


The more I use Windows 8, the more I like it.


It?s still a beta, of course, but it?s been fast and reliable enough for me to use day in and day out.


After more than a month of daily use, the new Start and search screens have become comfortable. Yes, the new design is a big change, one that takes some time (and a bit of unlearning) to adapt to. And yes, there are minor annoyances. The shortcut in the lower left corner of the display that leads to the Start screen, for example, desperately needs some fine-tuning. I have no doubt that Microsoft has heard the intense feedback and will make the necessary adjustments in the final release.


In this post, and the accompanying gallery. I want to share some of the little shortcuts, surprises, and secrets that only reveal themselves when you roll up your sleeves and use the new OS every day. These are things you might not discover on your own.
Gallery: 12 shortcuts and secrets for the Windows 8 Consumer Preview


I?ve come up with a dozen items, divided ... Read more

More replies
Answer Match 51.24%

Detailed user guide & online help file for comodo antivirus 8, firewall 8, internet security 8

Installation
Interface
Detailed info of various settings
detailed info about firewall, sandbox and HIPS
Detailed info about security alerts
Comodo version 8

User guide : https://help.comodo.com/uploads/helpers/Comodo_Internet Security_ver.8.0_User_Guide.pdf
Online help file : https://help.comodo.com/topic-72-1-623-7587-Introduction-to-Comodo-Internet-Security.html

Comodo version 7

User guide : https://help.comodo.com/uploads/helpers/Comodo_Internet Security_ver.7.0_User_Guide.pdf
Online help file : https://help.comodo.com/topic-72-1-522-6207-Introduction-to-Comodo-Internet-Security.html
 

More replies
Answer Match 51.24%

Hi, I'm having a problem entering my product number (to be able to download the user guide for my HP notebook).  I managed to enter it once and it accepted the number but then right at that time I lost my connection to the internet and since then, when trying to enter the same product number I'm getting a page saying it doesn't accept it and it's actually not the same number I'm typing in.  My correct product number is F6D45PA#ABG and it's saying I'm entering f6d45pa&#35abg and therefore, won't accept it.  I've no idea where the &, 3 & 5 are coming from?? I've tried typing the correct number elsewhere and copying and pasting, but still it says I'm entering that wrong number. If anyone's able to help I'd really appreciate it, thanks. 











Solved!
View Solution.

A:Downloading user guide for HP 15-D014tu - wrong product numb...

Hi, All the downloadable documentation for your notebook can be found on the following link. http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=nz&dlc=en&lang=en&lc=en&product=6622251& Best regards, DP-K

5 more replies
Answer Match 51.24%

F Secure antivirus user guide

Anti-Virus 2015 - User's Guide:
?e?tina, dansk, Deutsch, eesti, English, español, español de Latinoamérica, français, français canadien, italiano, magyar, Nederlands, Norsk, polski, português, português brasileiro, român?, sloven??ina, suomi, svenska, ti?ng Vi?t, Türkçe, ????????, ?????????, ???????, ????, ???? (??), ???, ???? (??)

Anti-Virus 2014 - User's Guide:
?e?tina, dansk, Deutsch, eesti, English, español, español de Latinoamérica, français, français canadien, italiano, magyar, Nederlands, Norsk, polski, português, português brasileiro, român?, sloven??ina, suomi, svenska, ti?ng Vi?t, Türkçe, ????????, ?????????, ???????, ???, ????, ???? (??), ???? (??)

Anti-Virus 2013 - User's Guide:
?e?tina, dansk, Deutsch, eesti, English, español, español de Latinoamérica, français, français canadien, italiano, magyar, Nederlands, Norsk, polski, português, português brasileiro, român?, sloven??ina, suomi, svenska, ti?ng Vi?t, Türkçe, ?????????, ???????, ???, ????, ???? (??), ???? (??)

Anti-Virus for Mac 2015 - User's Guide:
?e?tina, dansk, Deutsch, eesti, English, español, español de Latinoamérica, français, français canadien, italiano, magyar, Nederlands, Norsk, polski, português, portu... Read more

More replies
Answer Match 51.24%

I'm looking for a manual for this laptop that I inherited. For starters, I'd appreciate it if some could just tell me how to adjust the screen brightness/contrast (assuming the screen isn't actually dying!). Thanks.

Ken
 

A:Solved: User Guide for Toshiba 2250XCDS Satellite laptop

8 more replies
Answer Match 51.24%

After having sucessfully updated my Realtek HD Audio Driver, I now need to know how I go about setting it all up in Realtek HD Audio Manager.

My audio engineering and setup skills are limited by the fact that last time I ever attempted anything in this field, it involved two tin cans, and a piece of string![System FAILED!....Error: String snapped!]

What I need are easy-to-follow instructions, for the entire setup process of Realtek Audio Manager, from start to finish. I don't want to make a mess of the audio system by barging in, without a clue as to what I am doing, and clicking willy-nilly all over the place.

I also note that the Realtek HD Audio Manager Setup page does not show a ?Help button for the lesser forms of life, and for this reason ask if there are
PDF/User Guide/Instructons etc. anywhere that lead you through the Setup process for the HD Audio Manager?

A:Realtek HD Audio Manager - Setup PDF/User Guide/Instructions?

I don't know if there are any but have you been to the manufacturers site to see if they have any instructions that would help.

4 more replies
Answer Match 50.4%

I have two Z 24nq monitors connected to my laptop docking station.  This morning I put my laptop in the docking station, and it will only recognize one external monitor. I cannot get the second monitor to pick up the signal no matter what display options I choose.   A few months ago I chanced on the correct settings to daisy chain through the DisplayPort.  Unfortunately, I didn't write them down.  I say "chanced" because the User Manual posted online does not display instructions that match the On Screen Display (OSD) for my monitors.  http://h20565.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c04678022 - see pages 22-23The Management option contains DDC/CI Support and Factory Reset only. The DislayPort settings are under the Input Control selection at the top level of the OSD. Z24nq 23.8  (2 monitors - same settings/fw version)FW Rev AIMM012560 x 1440 60Hz Laptop:HP ZBook 14 (1st Gen)Windows 7 Pro 64 bit The User Guide needs to be corrected to include what I'm seeing (different firmware causing different menu options?) -- OR, is there a FW update that I should install for my monitors?Need the correct settings for monitors 1 & 2 DisplayPort daisy-chain settings to extend displays (not mirror).  

More replies
Answer Match 50.4%

I have two Z 24nq monitors connected to my laptop docking station.  This morning I put my laptop in the docking station, and it will only recognize one external monitor. I cannot get the second monitor to pick up the signal no matter what display options I choose.   A few months ago I chanced on the correct settings to daisy chain through the DisplayPort.  Unfortunately, I didn't write them down.  I say "chanced" because the User Manual posted online does not display instructions that match the On Screen Display (OSD) for my monitors.  http://h20565.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c04678022 - see pages 22-23The Management option contains DDC/CI Support and Factory Reset only. The DislayPort settings are under the Input Control selection at the top level of the OSD. Z24nq 23.8  (2 monitors - same settings/fw version)FW Rev AIMM012560 x 1440 60Hz Laptop:HP ZBook 14 (1st Gen)Windows 7 Pro 64 bit The User Guide needs to be corrected to include what I'm seeing (different firmware causing different menu options?) -- OR, is there a FW update that I should install for my monitors?Need the correct settings for monitors 1 & 2 DisplayPort daisy-chain settings to extend displays (not mirror).  

More replies
Answer Match 47.04%

How to Create Your Own XP System Restore Disk Guide + dual boot guide.

This guide is for XP users with home built systems. It may also work for others, but I have not tested it on any brand name systems.

Everybody knows that there is nothing sweeter then a fresh installation of XP. Your computer starts and runs faster. It almost never freezes up and crashes. Everybody also knows that as time goes by; your computer starts to slow to a crawl. You run the gambit of system utilities (defrag, registry cleaner, garbage cleaner etc), but your system never runs like it did when you first installed XP, and deep down you know that it never will until you do a complete reformat and reinstall of XP. So what is holding you back? Well, you also know that it will take a lot of time to reformat, reinstall windows, reinstall all of your favorite programs, and download the truck load of updates that have occurred since you first bought your system and your programs. And let?s not forget about your system drivers. Now if you bought a brand name system, it most likely came with a set of restore disk or a restore partition on your hard drive. Or it may have a program that asked you to create the restore disk when you first started it up. In any case, you may already have your restore capabilities if you have a brand name system. But even then doing a system restore would only take you back to the original OEM created system. I personally hate brand name computers because of... Read more

A:How to Create Your Own XP System Restore Disk Guide + dual boot guide

How to Create Your Own XP System Restore Disk Guide + dual boot guide. Part 2

One additional note I want to add before finishing this guide, is that if you plan to use this to dual boot, there are some additional steps you have to take to get it to dual boot. Since, when you do the restore as a dual boot option, you are not running the installation process, windows will not modify the boot.ini file to add the new XP installation as a boot option at start up. With out this, you will not be able to boot from the new XP system. In order to modify the boot.ini file you will need to go through several steps. I will give you two ways to do this below. The first one is the best and safest way to do it, the other is faster but there is some risk involved.

Option 1: This option uses the Windows Recovery Console. The simplest way to start the recovery console is to pop your XP CD into your CD drive and restart your computer. In most case you system should come with a black screen after the post process and say ?PPRESS ANY KEY TO BOOT FROM CD ?.. You really need to pay close attention during the restart process to catch this screen as it only stays up for a few seconds. Of course you need to press a key, any key on your key board while this screen is up. If you don?t see this screen you need to do one of several things. Depending on your motherboard brand it may be a simple as press one of you F keys during the post process to bring up the boot menu screen, where... Read more

1 more replies
Answer Match 47.04%

Hi,I need some help with the guide titled, "Preparation Guide For Use Before Using Malware Removal Tools and Requesting Help".http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/I'm up to step 8.I already downloaded GMER and when I double click it. It would automatically do a scan without prompting me (lasting less than 10 seconds) and then I continue with the instructions in the guide: I unchecked 'Sections', 'IAT/EAT', Drives/Partition other than Systemdrive, which is typically C:\, and 'Show All'.When I clicked "scan" the program just froze on me. I waited for about 5 minutes to see if it was just a lag but then I noticed the clock on the bottom of my computer screen also froze. I had to force the computer to shutdown by holding the power button. I tried GMER again about 2 more times and it froze both times the moment I clicked "scan". Then on the 3rd and 4th try, it scanned but I walked away for about half an hour and when I returned, it appeared to have self terminated. Then my final attempt. The scan finished and I clicked the "save..." button and the program froze on me and again, the clock on my desktop has froze again and I was not able to save the scan report.Is there an alternative program I can use rather than GMER?Thanks

A:I need help in the guide titled, "Preparation Guide For... Malware Removal Tools..."

If you cannot get GMER to just just post the other logs asked for and explain the problem you had trying to run GMER.

3 more replies
Answer Match 46.62%

Source: http://blog.anti-virus4u.com/2015/04/download-install-activate-norton-security.html

How to download, install and activate your Norton Security product?

We have chosen Norton Security, but you can follow the same steps to download, install and activate your Norton Security with Backup.
Visit https://manage.norton.com/setup to create an account / sign in to enter your product key, access your account, manage your subscription, download, install and activate your Norton Security product.

Type your Norton Security product key and click the arrow icon.


Click Agree & Download to download your Norton Security product via Norton download manager.


Click the Norton downloader file.


The system will find automatically, correct version of Norton Security that is compatible with your device.


Click Agree & Install to install your Norton product.
Your Norton Security product will be automatically activated, and registered to your Norton account.
Congratulations!
You have successfully download, install and activate your Norton Security product

Follow the same instructions to install all Norton Security products on your device.

 

More replies
Answer Match 44.52%

Since I was last on the forum I had problems with the computer continually blinking all the time, as if programme was running in background continually. I had installed Secunia PIS and believed that it may have caused the problem. I then had problem uninstalling Secuni and found that I was able to sort it out using “REGEDIT” in the Software section “user_software” and “machine_software”, click and deleted the programme.

The continual “blinking” saga is still there. But, at the same time I am having problems with printing any documents with the Epson C90, which would take at least three minutes to complete the spooling and printing function. I didn’t have this problem before. I spoke to Epson support and sadly they were no help, except to advise me to uninstall and reinstall the programme.

I thought that possibly my WORD programme could be part of the problem, which is WORD 2000 SR-1 that is fully updated to SR-3. I then uninstalled WORD and reinstalled WORD as per Microsoft Download site for software, and printing problem was still the same.

I also have an Epson TX110, I decided to install the TX110 and use it as the “default printer”, but the same printing problem existed. I then decided to uninstall all EPSON printers completely via “ADD/REMOVE”. The EPSON Software was listed under many components. I “REMOVED” each component, one at a time, but the following four components wouldn’t remove an... Read more

A:Epson components of Epson Printer Software Will not REMOVE

I have taken further steps from many answers found on the Google search engine.

(1) I ran Microsoft fix-it on uninstalling problems,and I fixed one EPSON item that wasn't neither of the components that are still listed on ADD/REMOVE.

(2) I went REGEDIT Hkey-Local-Machine-Software-microsoft windonw- current version-uninstall and scrolled down to those EPSON components, and hit the DELETE button.

(3) I then went to C Drive-Programme Files and clicked on three EPSON files that were still listed and deleted them.

I assumed after all of that it would remove all in total, but those entries are still listed on the ADD/REMOVE population. Any idea how to delete these, or even if they are there and it appears that all EPSON components have been DELETED, would it be okay to download the TX110 printer again?

Thanks and regards

2 more replies
Answer Match 44.52%

The Epson Perfection Scanner 1250 which is installed on my PC with Windows XP SP2, used to work but no longer does. I have re-installed the scanner software from the CD supplied with the scanner, but when I try and use it I get a message : Epson Twain 5 Scanner Model not supported by Epson Twain. Any suggestions?
Will
 

A:Solved: Epson Perfection 1250 & Epson Twain %

I spoke to Epson. They told me to download a new driver. Shouldn't be a problem, but first I have to install Winzip. I think it is best to regard the problem as Solved. Will
 

1 more replies
Answer Match 44.52%

Since I was last on the forum I had problems with the computer continually blinking all the time, as if programme was running in background continually. I had installed Secunia PIS and believed that it may have caused the problem. I then had problem uninstalling Secuni and found that I was able to sort it out using “REGEDIT” in the Software section “user_software” and “machine_software”, click and deleted the programme.

The continual “blinking” saga is still there. But, at the same time I am having problems with printing any documents with the Epson C90, which would take at least three minutes to complete the spooling and printing function. I didn’t have this problem before. I spoke to Epson support and sadly they were no help, except to advise me to uninstall and reinstall the programme.

I thought that possibly my WORD programme could be part of the problem, which is WORD 2000 SR-1 that is fully updated to SR-3. I then uninstalled WORD and reinstalled WORD as per Microsoft Download site for software, and printing problem was still the same.

I also have an Epson TX110, I decided to install the TX110 and use it as the “default printer”, but the same printing problem existed. I then decided to uninstall all EPSON printers completely via “ADD/REMOVE”. The EPSON Software was listed under many components. I “REMOVED” each component, one at a time, but the following four components wouldn’t remove and kept on coming up with and ERROR messages stating: “Specific ... Read more

A:Epson components of Epson Printer Software Will not REMOVE

I still have the blinking computer saga, but I was able to ADD/REMOVE the four problematic programmes by doing this:

Click Control Panel – ADD/REMOVE

Programme won’t remove/uninstall and an ERROR appears stating “specific module not found” or any other form of ERROR Message that stops the component being uninstalled.

Steps (Before doing anything on each step, back up and restore):

(1) Go to Microsoft Uninstall Problem Trouble-shooter KB2438651 or later version, and RUN the “FIX IT” download, and if it doesn’t “FIX IT”, then do the following steps.

(2) Click START, go to RUN, type in REGEDIT and go to:
HKey_current_user-software and then find FOLDER and DELETE Folder.
Hkey_current_local_machine-software find FOLDER and DELETE folder.

(3) Go to Hkey_local_machine-software-microsoft-windows-current version, then click (+) for UNINSTALL, scroll down to programme-RIGHT CLICK-DELETE.
(Note: The programme or whatever you are trying to remove from ADD/REMOVE many not be listed under its NAME, then highlight the individual “registry keying information” one at a time and the NAME will be listed in the right column, then RIGHT CLICK and DELETE. Keep going down the “registry keying information”, highlighting each as you go find the name of the problematic programmes, and deleting.

(4) Go to C DRIVE –Program Files and click to see if any other... Read more

1 more replies
Answer Match 42.42%

So I recently replaced my ageing printer with an Epson XP-432 and my O/S is Windows 7, I got it up and running and software installed all ok.
Now I'm trying to establsh an issue with the Epson Scan software but for some or known reason it's not launching, I've tried re-installing the software but no change.
Has anyone else had the same issue?
Thanks
Rob

More replies
Answer Match 42.42%

Hi I am hoping that some one can help solve this problem for me we have just upgraded our computer and it has windows 7 as the OS we used XP previously.

The printer / scanner works fineas a printer however my problem is that the scanner part will only work with windows fax scan, I used to scan using epson scan on the old computer and I find this much more flexable than the windows fax scan. however it will not run on the new computer. I have down loaded the 64 bit driver (as we are using windows 7 64 bit) and installed it but when I try to start epson scan I get " epson scan cannot be started" " try trouble shooting" which I have done and have set the compatibility settings to use XP service pack 3 and run as administrator. And this does not help.

Can anyone offer some suggestions how I may get this to work and also explain the solution in step by step process as i only have a basic knowledge when it comes to computers.

Thanks
Jason

A:Epson cx3900 and epson scan

You can try some freeware graphics programs that have scan support such as
http://xnview.com/en/index.html
and
http://www.irfanview.com/

3 more replies
Answer Match 40.32%

This is something that has been bugging me for a while now, and I've been unable to solve this problem. Perhaps someone out there can provide some guidance.

Sometimes, I'm unable to print things (such as online coupons) because I'm told that my printer is set to "Keep Printed Documents." I've tried disabling this setting via the Advanced tab under the printer's properties. However, when I do this, click Apply then OK, and close the tab, the setting automatically reverts back to "Keep Printed Documents". Does anyone know why this is happening? It's sort of frustrating to not be able to set the printer settings the way you choose.

I appreciate any tips/suggestions you might have. Thanks!

Bubba
 

A:Keep Printed Documents

9 more replies
Answer Match 40.32%

How I can change the name that appears at the top of email messages when I print in Outlook 2002?
 

A:Name at top of printed emails

6 more replies
Answer Match 39.9%

I have 3 print queues that are retaining the printed jobs in the queue and every now and again the damn thing prints all the job again. I have checked that the keep printed jobs button is NOT checked/selected, but the queue acts ilke it is selected to keep printed jobs. I have 125 printer queues and only 3 act like this and they are set up identical to the others. I have reconfigured this twice on all 3 and they still act like they are set to keep printed jobs in the queue.

Anyone seen this and know of a solution, on the Microsoft site I am seeing posts but not a single reply about how to either run a job to clear them out a couple times a day or fix this so they act as configured. To NOT keep printed jobs in the queue.

Any help as always is much appreciated.

The race to solution is on, let's see who can figure this one out first.
 

A:printed job remain in queue

7 more replies
Answer Match 39.9%

I'm new here!

First I would like to say I'm a TBI survivor and I'm a male and 42 years old .
I was purchased an emachine computer with a Lexmark lasar printer,
Whenever I go to print something, be it a web site article or a personal document that was created using Microsoft Works Word Processor. Whatever is being printed my name appears at the VERY top and the city and state printed at the bottom.
I know little about computers so I'm trying to get an answer why this is being printed.
The only thing that I can come up with is MY NAME, CITY and STATE was somehow entered on this computer's Hard drive and is prints it because it's been entered by someone at the store before iyt was brought home and set up for me.

If there is someway that I can delete this info. being printed, PLESE tell me what to do EXACTLY!

Thank You!
Chaz-62

A:I'm new her! Why is my name, town and state being printed?

That's very strange, it sounds like a 'Header and Footer' has been set up with that info and is in your normal.dot template. (If Works uses such a template, I know Word does).
Try doing a Find (or Search depending on your version of Windows) for normal.dot and rename any found to normal.old. Then test the printing again. If there is a problem you change the names back again.

hth

3 more replies
Answer Match 39.9%

I have Windows 98SE with a HP 842C Deskjet printer.
Does anyone know of any program that would allow me to see how many pages I have printed since the last ink refill?
 

A:Counting Printed Pages??

Bump
 

1 more replies
Answer Match 39.9%

hello all,
Im using access 2010 and there is a print of a report like a certificate whenever needed. My office is requesting me to provide a report of all certificate printed including the date and to whom .
my only way to do this is to force users to enter a field print (yes/no) and from there the query "yes" and the report be printed.
Is there any way to do this without forcing the user to enter the yes/no. field.
Thanks
 

A:Try to record printed records

6 more replies
Answer Match 39.9%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?

Thanks
Pam

A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:

SOLUTION:

When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"




I love Myriam the little bunny

1 more replies
Answer Match 39.9%

When using my picture it! publishing....when I add a border to a picture it comes out distorted when I print them out. With no border it prints out great.

Any ideas why this is happening?
 

More replies
Answer Match 39.9%

I am unable to print pictures completely. I print them from Picasa on HP photosmart C4250. When I try to print, although the preview is correct, the printed result is not. Part of a picture will come out, or the image starts at the end of the paper and is therefore incomplete. Until now, everything worked properly.

soslow24
 

More replies
Answer Match 39.9%

Don't print much multi page output, so am NOT sure when this problem began.

Originally, the pages on my HP DJ855C were printed as expected: page-1 first, then page-2, etc; this resulted with page-1 being on the bottom of the stack. Depending on the application being used, there was often a Print-Order option available for Back-to-Front printing so that the last page would be printed first and then page-1 would be printed last and be on the top in the stacker.

NOW, things seem to have reversed:
If I do NOT ask for the Back-to-Front, then I seem to get it anyway (i.e., page-1 last and on the top). but if I want the original order (i.e., page-1 first and on the bottom) then I must use the Back-to-Front option.
It seems as though the default has become Back-to-Front and then selecting the option for Back-to-Front re-reverses the order and the result is Front-to-Back.

Possibly this reversal happened when I went to Win/XP; possibly it happened with the installation of some piece of software.

Q. Has anyone else had this exxperience?

Please tell me where I might change some parameter to make the option of Front-to-Back actually print the page-1 first like it did originally?

Any advice apprecaited.

Thanks,,

A:Order of Pages Printed

Digger,

Go into your printers and faxes options off of your start menu.

Select your printer, right click the mouse and click on printing preferences.
On the features tab at the bottom there is a option for start printing from last page. If there is a check mark in the box next to it, click there with the mouse and uncheck it and then click on apply and ok and you should be all set after that?

1 more replies
Answer Match 39.9%

Hi all,

Well not sure if this is the right area for this but not really sure what the problem is.

When I boot my PC during the bootup dos stage I hear my PC making noises, it still boots up Windows 7 ok but as soon as I open something I get continious R type accross my screen, If I hit the caps lock it changes from R to r.

Thought it was my keyboard having the R locked down so tried to fix it, no luck. Changed keyboards with my spare one no luck. Disconnect all keyboards no luck.

So where is this R coming from, its impossible to us my PC at the moment as soon as you click somewhere (word, exel, Google etc) an R/r appears.

Any ideas where to start?
 

A:Continous R being printed in Windows 7

8 more replies
Answer Match 39.9%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?
Chuck.
 

A:Solved: Printed name on paper

16 more replies
Answer Match 39.9%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/
 

A:Scanned document when printed out........

16 more replies
Answer Match 39.9%

when i tried to print photo from (user administrator)windows7 photo viewer there appear print picture windows without photo preview(seems busy) and after some seconds five repeated error messages "your picture cannot be printed because of this error occured" appear. It is working in user account Guest. printer and its driver is okay(updated). whats wrong with my windows 7 photo viewer? please help me

A:your picture can not be printed because of this error

From Windows Answers:






I believe it is a problem with the "photowiz.dll" file in system32. It is version 6.x.xxxx.xxxx. I found an older version of this file, had to change the attributes and permissions of the file to allow it to be changed. I renamed it with an "dlx" extension and then copied a version 5.1 photowiz.dll to system32 and the print wizard works again! The site I got the file from is: http://www.dlldump.com/download-dll-files_new.php/dllfiles/P/photowiz.dll/5.1.2600.2180/download.html



Try Googling your problem first. Hope that helps

7 more replies
Answer Match 39.9%

Hello Team, When I am trying to select eqal (=) to button on which it is printed, it is not getting typed whereas when I am selecting some other button eqal (=) is getting printed. Please help me in solving this issue. Regards,Nizam

More replies
Answer Match 39.9%

Whenever I print out an email from someone, the resulting document prints my first and last name (Outook Express) in the top left corner. I would like to orevent this but have searched in the Options and cannot find how it got there or how to permanently remove it. Can someone please tell me. Thank you.
jy
 

A:My name on printed emails not wanted

It is using your user name for the header.
You can change this in the account settings.

Not sure if you can turn this off.
 

2 more replies
Answer Match 39.9%

The problem I am having is that when I go to print tax return forms from the IRS site or New York Tax Dept site, the form prints "short", that is, the last four or five lines of each page do not print.

You cannot save the data in these forms, they will only save as a blank form. Your only option is to print it.

However, although Adobe tells how to cure this problem ( by clicking File-Print and going down the menu which comes up to "printer scaling", then chosing "print to fit page", this only works if there is a
FILE menu on the left hand side of the page.

In these tax sites, the forms do not have a tool bar above allowing you to chose a FILE menu.
You can right click the mouse and chose PRINT, however it will print a cut off page.

SOOOOOOO ..how do I either:
1. Get a standard Tool Bar to appear on top of the form, on these web site pages, or
2. use some other device or method to print these documents to fit the page.

If any of you are about to suggest right clicking on the printer icon PRINTERS, in the control panel, forget it....my printer does not bring up anything about "Print Scaling".

Hopefully, some geek out there will read this and solve my problem. Thank you. 44 Guy

A:printed pages cut off at bottom

Every computerized tax form that I have seen...is available at the website of the sponsoring governmental agency...and reflects a printed version option which has resulted in everything being printed properly.

I'm not sure where Adobe figures into tax preparation.

If you are using a 3d-party app to do taxes...then the problem resides with the support for that application, IMO.

Louis

http://turbotax.intuit.com/support/iq/TurboTax/Install-Adobe-Reader/GEN12226.html

4 more replies
Answer Match 39.9%

Other than dogging the print preview, and struggling with the size in any pertinent image editing software, has anyone found a reliable way to limit or control the size of a printed web document?
to wit:
I scanned an odd shaped document, 3x8" to email to myself at another site, and the printed form was big enough for two pages. What a waste.
I print receipts regularly and they, 99% of the time have a "trailer" on a last page that has stuff like web site address or URL, a Secure Website emblem, or other, clearly unnecessary printing. My introduction to Windows word processing (WordPerfect) had, and I still use, a "makeitfit" command. Invoking such a command AUTOMATICALLY when printing from the web seems like a simple, brainless way to conserve paper...it'll give me a fractional font (e.g. 11.9 vs. a 12) and would prevent the idiotic tendency of a printed page to only have the leftward 80%, l which leaves off the important stuff like the prices...(you gotta print landscape to avoid this)
And I thought a computer was to make life easier, boy was I ever misled)
 

A:printed size of web documents

The problem is that web pages are usually coded to make them look good on screen, and that tends to make them "unfriendly" when printing.

Web pages designed for printing do exist, and it works well in those (few) cases.

Cutting and pasting into a word processor is sometimes the only workable solution.
 

2 more replies
Answer Match 39.48%

I am so hoping someone knows the answer to this very perplexing problem... I thought it was my printer so I bought a new one and I have the same problem. I print a picture of my granddaughter, who has these wonderful chubby cheeks.........until it is printed and the chubby cheeks are gone. She has slimmed right down...... lol I have been struggling with this problem for quite a while now, have asked everyone who comes within two feet of me and no ones knows how to fix this or what is even causing it. I know someone here will know. I have never had a problem that this site has not been able to fix for me. : ) Thanks, in advance.

Oh yes, and new printer is an Epson 835 al-in-one and my old one is an HP photosmart 2575
 

A:Solved: quality of printed pictures...

16 more replies
Answer Match 39.48%

Sir,
Thank u for ur support on my previous issue. I have an another issue, whenever I give print from an adobe reader file it shows the error message "Document could not be printed" . I have HP LaserJet printer model F2180. Kindly help on this issue.
 

A:adobe reader files could not be printed

If your problem is that Adobe Reader is unable to print, but other applications can print, I suggest that you uninstall Adobe Reader and then download and install it again.
 

1 more replies
Answer Match 39.48%

Hi, when I print anything from the web (Amazon receipt for example) the 'Print preview' and actual hard copt print appear as source code (similar to lots of DOS type commands etc) and very small print size. Only happens in Internet Explorer 7.0 -tried using Firfox and that appears okay- any suggestions -anyone? (thanks in anticipation)
 

A:Printed Web pages appear as source code?

open IE, click tools > internet options > advanced tab

click the reset button

This will put everything back to default options and all is good!
 

2 more replies
Answer Match 39.48%

Anything I print off the web or email says "Network + Job Functions" at the top of the page and the date at the bottom. Sure, I've been to websites pertaining to the job functions but I never saved anything with that name. How can it be printing at the top of any page?
If I print a document that I made and saved from Wordpad, not anything from the net, it prints fine with no header. I looked at the printer settings dialog box and it shows nothing with this title.
Thanks, Jim
 

A:Printed documents show same heading

If you are using IE, at the top of the page click on file and page setup and see what you have under header and footer. You probably need to change those.
 

1 more replies
Answer Match 39.48%

Problem: Green Cast on Images being printed
Editor - Elements Version 7 & Windows default viewer
Printer R285
Colour Management:- every variation tried

My Neighbour has a Epsom R285 http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-Photo-R285 printer, his had it a few years.
I have recently changed his PC to a Windows 7 desktop and installed all the drivers. The Printer worked fine, but yesterday he was getting a green colour cast on all images
I checked the head alignment, nozzle set-up and cleaned the heads
Checked with windows default viewer, and printing from that application - same problem
Checked all the Colour Management, ICC, settings etc - tried without Management, sRGB, adobe 1998 etc, checked colour management on printer and elements

The image looks fine on the screen , I have emailed a sample image and on my setup it prints fine

The next step was to try the printer on my laptop
any other ideas - this is usually a colour management issue and i have fixed quite quickly in the past on other systems - so I suspect I'm missing something obvious now
 

A:Green cast Images being printed

Wild guess .. Windows 7 software update for the printer ??
 

3 more replies
Answer Match 39.48%

Hi

I suspect this might be a fairly common problem. Whenever I print there also seems to be a block of about 5 fine lines printed over the text for about ever new line of text. Now I recently bought a new (high capacity) cartridge which costs a fortune, so I'm not too keen to buy another if it is the printer (about 6 years old) which is the problem.

Has anyone else had the same sort of problem?
 

A:Solved: Lines through printed page

Try cleaning the print heads, this is the normal solution to this problem.
 

2 more replies
Answer Match 39.48%

Hello TSG!
I am looking for a solution (maybe a registry setting) to not allow XP to print, say, more than 30 pages in any one print job. Any ideas?

Thanks!
Curtis
 

A:Set Max Number of Pages to Printed at a Time

Any ideas? Found some software online that is far beyond what I need.
 

1 more replies
Answer Match 39.48%

I bought a parallel to usb printer cable to make my HP Laserjet 4L to work on my Vista dell laptop and it worked. Then I upgraded to Win 7 64 bit. Now it won't work. It sees it, installs fine, just won't print. no errors. Can it be a "cable driver" (never heard of such a thing until I started researching this problem) if it worked with Vista? It's a no-name cable, so won't likely have a driver that I can find.

Is there anything I can do but replace the cable?
 

A:HP Laserjet 4L printed with Vista, not with Win7

7 more replies
Answer Match 39.48%

I have an Access report that includes a sub-report in whihc I would like to print the records on one row, rather than one column. So far, I have been unable to find a solution.

Example Record:

Job Number: 123456
Version(s): 001,002,003,004
 

A:Access Sub-report records printed on one row

7 more replies
Answer Match 39.48%

computer freezes, especially when going to facebook.com. I am getting pop-up ads. everything I print on my Brother MFC-440cn printer comes up with a watermark from "Spectrum Glass" When trying to download from your instructions for DDS I get a blank page and no download. I have included info that I thought may be useful.
 

A:lock-ups, pop-ups, and watermarks on printed material

Run the following:

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

Thanks,

Kevin....
 

1 more replies
Answer Match 39.48%

Using HP J4680 printer. Some of the pages I print size I print from web pages are so small it is hard to read the printed pages.

Is there a way to change the printed text size?

If so how?

Thanks

Gary
 

More replies
Answer Match 39.48%

I have had my problem for some time and had a work around which is no longer applicable hence I get a white screen where message should be so I don't know what is being said.

My problem started about 6 or 8 months ago on Outlook Express. At that time I was using dial up and changed over to Earthlink.net with their e mail program Total Access. My problem immediately disappeared. One month ago I switched over to High Speed and the person doing the custom install saw I used Outlook Express so he reenergized (non computer word) the program. The custom installer saw my INBOX with about 30+ messages that go back a long way. EACH ONE LINE description was complete, meaning To: xxx,
From: YYY, Subject: ZZZ, and anything else that showns on the ONE LINE.

When I double click on one of the inbox messages I FIND MY PROBLEM! Everything that showed before is shown again, but now greyed out since it has to do with basics. HOWEVER, the text area (where the message should be) is 100% pure white. I have double clicked all 30+ messages and get the same thing,...a pure white screen.

I thought it might have something to do with installing SP-2 on my XP Home Edition BUT SP-2 was installed about 6 months ago and my e mail problem started about 8 months ago.
That is my problem! Can anyone offer suggestions?
 

A:No Outlook Express Messages Are Printed

Hi George-2

Welcome to Tech Support Guy Forums!

So if I understand correctly, you can send and receive emails ok.

The problem lies in that the messages you receive are blank inside?

If you run your mouse over the inside of the message, does anything show up in the highlighted/selected area?

Perhaps your fonts have a white color?

Are you able to create a new message and see the fonts inside?

Let us know.
 

1 more replies
Answer Match 39.48%

When i try to print something the documents appear in my print queue then are deleted before they even begin to print, my printer was working fine until yesterday and now this

Please help

Steve
 

A:Printer deletes documents before they are printed

G'day steviejay, sounds like you have an intelligent printer that is censoring your output!
That is a worry, I haven't seen that problem previously.
You might try having a look in your control panel, system, devices or device manager, with a bit of luck when you scroll down through all your devices you will find a USB printer, (assuming yours is usb) if you open that item you should see something like "this devise is working properly" which is a good start for troubleshooting.
There should be no yellow exclamation marks on this item.
Are you quite sure your print queue in the print manager is being actually deleted?
What kind of printer is it?
The assumption is that it is a PC using a windows variant.
Cheers, qldit.
 

1 more replies
Answer Match 39.48%

Can't find app that lets me get photos printed & delivered to me for Lumia 640XL

More replies
Answer Match 39.48%

Other than using View>Text Size, is there anything I can do that may cause the print to be darker? I know that my eyes are beginning to grow weaker but perhaps someone knows a trick for me to use or an answer. The light print seems to occur on most web pages and very bad on my ISP webmail account. My signature will tell you I am using WinXP Pro and SP2. If all pages were as clear and dark as the print I am seeing while typing this thread, I would not be asking for help. As always, TIA
 

A:Solved: Pages Appear To Be Too Lightly Printed

7 more replies
Answer Match 39.48%

I have a problem with my Word documents. When I try to print them, the right edge is cut off. I thought it was my computer or my printer, so I took it to another computer, and the same thing happened.

The problem is in the files themselves. How do I change the files so they function as they used to? This has been the case with more than 20 files, which were made at different times.

My computer used to warn that the form I was using was too wide, and ask did I want to go ahead. I would select yes, it would print, and would look just fine. Now it does not ask that question.

Incidentally, another problem is that my files no longer end with .doc, but now say .rtf. All of my Word files changed in several ways at once.
 

A:Word Trimming Right Edge when Printed

11 more replies
Answer Match 39.48%

I have printed photos from e-mails before, but never had a problem with moire patterns. This time I have a fine vertical line pattern that is not clearly seen unless you have glasses on that magnify them. Unfortunately, I wear glasses that bring them out. What can I do to prevent or get rid of the moire? Any ideas? Thanks, lilart
 

A:Moire from printed e-mail photos

It likely just a matter of the resolution of the email derived image vs the resolution of the printer. Does it happen with every image or just the lower resolution ones from the emails?
 

2 more replies
Answer Match 39.48%

Gentlemen/Ladies,I?m not sure where to post this question so I?m plumping for this forum, knowing that it will be redirected if it is in the wrong place.Occasionally, when I open a website, its pages are too wide for my monitor and I have to scroll across to the right to see what is hidden from view. When I go to print the pages, I end up with just threequarters of the width of the script.I am using an HP LaserJet 1010 printer.I do not have this problem with all websites. Today, the offender is - http://www.explorenorth.com/whalers/featur...lecaptains1.htmWill the pages of this website be partly displayed on the monitors of all of the people who open it , or are my own ?settings? to blame. Please, how can I overcome the problem ?Yours sincerely, oldsoldier

A:Lack of printed script width

Hi oldsoldier.I get the same thing when viewing that page. My screen resolution is set to 1024X768. I found that if I went to View>Text Size and set it to Smallest the page almost fit. Have you used Print Preview in the File menu to see what the page will print like? You can also use Page Setup in the File menu to adjust the margins etc. before printing.

3 more replies
Answer Match 39.48%

How.
This question may look stupid.But please help me
Is there any way to save the documents or material from internet which to be printer
As i have no printer at home,I have to take that to my friend's house,where we can print.That pc has no internet
So i want to save douments offline and then print later using a pendrive
Windows document viewer is one kind of programme,that useful
Is there any other ways?
Please help me
Thanks in advance
 

A:How to save douments from internet which are to be printed later

6 more replies
Answer Match 39.48%

I'm trying to print images/pictures using windows photo viewer and I get this error "Your pictures can't be printed because this error occurred".... It doesn't tell me which error.. simply just says that in the dialog box. THe dialog box comes out like 4 times with the same message and I have to click OK.

I've already tried googling it and the only fix I can find is replacing photowiz and I already did but it has fixed. I've also installed Photo Gallery and it stil lgives me the same error when I try to print and picture. I've also reinstalled all my printer drivers...
Windows 8.1 Updates installed . HP Computer

A:Your pictures can't be printed because this error occurred

What is the mfg & model of the printer? How is it connected to the computer?

8 more replies
Answer Match 39.48%

Hey, I have a person here that has the problem that drawings that she has in her documents don´t print out. I´ve tried turning off background printing still same, I´ve tried printing it on my printer and that works.

Anyone have any idea on any settings or something I can change to make it work?
 

A:Images not being printed in Word 2002

Drawing objects (Tools - Options - Print) ticked?
 

2 more replies
Answer Match 39.48%

I can't see the printed material that I send or what comes to me.

More replies
Answer Match 39.48%

I've spent the last four hours trying to solve this/use info that's similar to my problem to no avail. I feel I'm so close I can smell the answer is near!

I have a form I use for work that I manually have to fill in 50 times a day with mostly the same information. This is definitely a job for a computer!

Ideally, I would like to open the spreadsheet and have a button that says 'Print' and it will print what I need - 50 forms with the right information.

So far I have done the following:

Created a custom page size (16cm x 14.7cm)
Scanned an original to use as a background so I can line up the information
Adjusted the Excel boxes to print the info in the right place.

Now I need to print the following number ranges as identifiers:

1 - 22, 29-42 and 51-54

I feel I'm close with using this macro:

Private Sub Workbook_BeforePrint(Cancel As Boolean)
[copy] = [copy] + 1
End Sub

I use both Excel 2003 and 2007, depending on where I am!

I have NO experience of macros until today, so any advice is very welcome.

Regardsm

Jeff.
 

More replies
Answer Match 39.48%

I have an HP Deskjet 920c that has worked fine until a few days ago. I tell it to print and the goes through the motions but nothing comes out. This means the printer icon is appears and says that it is printing but it does not. I have checked the power cords and the made sure that it is connected to the computer correctly. Any ideas?
 

A:HP Deskjet 920c says it printed but it didn't

13 more replies
Answer Match 39.48%

I have an Access database used on daily basis to print maintenance work order. Each work order is assigned with an auto field No. I have a commend button assigned to print each record in a report format. On clicking command button, i enter the record number to be printed and it previews the report and check for accuracy of data entered. Once checked, i click on the print icon to print the same.

My question is, is there any method to find out the record i am going to print now is already printed before? A kind of record keeping of the printed records. Also, the same method shall help me to find out how many times each record is printed?

Hope someone can help me
 

A:Record keeping of the printed records

8 more replies
Answer Match 39.48%

I'm running Windows 8.1 64 bit. I have a PNG file that exceeds the size of the page, 8.5 x 11, when printed. When I view the picture online it appears that it should fit the paper okay. I resized the file by %, pixels, and measurements (inches). I also changed the paper size to 8 x 10. Can somebody tell me what I am doing wrong.

Thanks
PapaK

A:Can not resize PNG file to fit paper when printed

Open a Word document of the desired size and import it there. You can also draw a box on the Word document and put it into there - it will fit. If you don't have Word, try Paint.

3 more replies
Answer Match 39.48%

Fill color isn't displayed during normal viewing of a worksheet. When the worksheet is printed or print-previewed, the colors are visible.

Re-installed Excel, problem persists.
 

A:Excel XP - Can't see fill colors until printed

Go to your control panel and double click on Accessibility Options.
Click on the Display tabsheet and uncheck "Use High Contrast" then press OK to close that window. You should now be able to see color in your view mode.
 

2 more replies
Answer Match 39.48%

I doubt that I can post this question here but I assume it'll be removed if not.

I have an HP printer, 2540, wireless printer. Works fine.

I started to print a pdf file. Because it was a large file I choose the 'booklet' option, which prints 4 pages on one side, then, when everything of the even numbers (I think, not sure) has printed, you will get a message on the pc telling you how to replace the already printed pages in the printer so it can print on the backsides.

When I saw the first batch I decided I didn't like it. So when the message with instructions on how to replace the already printed paper, I went in the printer's menu, highlighted the name of the document and did 'cancel'. In this printer menu it now said it was 'deleting' the document. But it didn't. I waited about half an hour. I turned the printer off and back on. I closed the document. But still the printer menu said 'deleting'.

I opened the document up again, changed the settings for the printer (as in one sided, normal size) and accidentally hit 'print'. I then noticed that - in the printer menu - the 'new' document showed up above the one that still said it was deleting. But it still didn't print. I went in the print menu again and highlighted the new document and did 'cancel' and it did cancel it.

But the old document is still sitting there, 'deleting'. I can not get past that. Any suggestions wo... Read more

A:Cannot delete partly printed document from cue

There's a way to force these to delete, if you don't mind a little typing. You need to open a command prompt by running cmd.exe. If you're unsure of how to do that, tell me which operating system you're using and I can walk you through that. This should open up a black window, and you need to type in the following commands sequentially, hitting the Enter key after each command.
net stop spooler
del %systemroot%\system32\spool\printers\* /q /f /s

net start spooler
The first command stops the printing service, allowing you to carry out the second command, which deletes any jobs in the queue. The last command re-starts the printing service, and you can try running a test print. Once that's all done, you can just close the black window.
 

8 more replies