Tech Problem Aggregator

fatal error; can not read IP configuration

Q: fatal error; can not read IP configuration


A: fatal error; can not read IP configuration

You need to adnvise which version of Windows you are running, but have a look here anyway:;en-us;286748&

1 more replies
Answer Match 66.78%

This is about my Windows XP computer, not the Windows 7.

I went to a website named for information and clicked a link about why my computer was slow. This is the message that I received.

This is a fatal error and IP. Board cannot function while this issue persists.

This issue is generally caused by changing your character set in the ACP to one that does not support data stored in the rest of your settings, or by restoring a database backup/completing a server transfer and importing your database tables using the wrong character set or collation. You should contact IPS Technical Support for further assistance. Does anyone have any advice about this?

A:Fatal Error: Your settings Could not be read by IP. Board

Sounds like the site was having an issue not your PC. That message would indicate a failure of the site's software.

3 more replies
Answer Match 63%

Help I can't get past the booting error and there is no way for me to pass this? I've tried many things and can't get past it

File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.

OS: Vista x64 Bit

A:Error while attempting to read boot configuration data?

Please see this article. It has some suggestions.

1 more replies
Answer Match 62.16%

This is the full error message I encountered--> An error occurred while attempting to read the boot configuration data File: \Boot\BCD
1) I have an old Dell Vostro 410, Windows Vista, configured to RAID 1 the whole time.
2) I wasn't able to boot it up one day, pressing the on button only got an amber light momentarily. From the symptom,  I replaced the CMOS battery as suggested by someone online and the PC was able to be powered up but it got to a blue screen-->
3) I realized that's because all the settings on BIOS has been wiped out after I took out the old battery, the "SATA mode" in BIOS was set to IDE instead of RAID, so I set it back to RAID as shown-->
4) I tried rebooting the the system again, this time I can see that RAID has been setup accordingly-->   and
5) But the rebooting was terminated with the message "an error occurred while attempting to read the boot configuration data" --> 
6) Following the on screen instruction, I tried booting from "Windows installation" CD to repair it, however after pressing a key on the following screen,... Read more

A:An error occurred while attempting to read the boot configuration data

When you removed the CMOS battery it set the BIOS to the default settings.  I suspect you will have to rebuild your RAID configuration.

3 more replies
Answer Match 62.16%

Hi, I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: \Boot\BCD"

I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive ?800 paperweight.. Any help massively appreciated!

To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the ha... Read more

A:An error occured while attempting to read the boot configuration data!

Go to your BIOS and set the CD as the first boot device, your hard drive as second.

If this lets you boot from the Win7 CD with the HDD installed run Startup Repair - Run 3 Separate Times.

7 more replies
Answer Match 62.16%

Hi all, im getting that message upon startup. Im running windows 7.
It requests for the windows recovery CD to be inserted, so when I put the CD in to boot I get a "windows is loading files" then a starting windows with the windows logo then just a black screen with a cursor, I left it like this several times for at least an hour an nothing happened.
I can't press F8 to access safe mode etc, nothing will happen.
Pressing F12 to boot from CD just does the same thing as putting the CD in normally.

Help please!?

A:An error occurred while attempting to read the boot configuration data

It seems the CD is damaged.
Burn a new Windows 7 Recovery CD on another computer.
You can download the image or make a copy of a functional Windows 7 Recovery CD.

Boot the new Recovery CD and run automatic StartUp Repair up to three times as sugested in the forum manuals !

Good luck!

1 more replies
Answer Match 61.74%

Hi All,
I have read most of the messages related to this. Unfortunately ASUS doesn't ship with a Vista disk and the Recovery DVD doesn't boot.
Details shown are
File:   \Boot\BCD
Status: 0xc000000f
Info:  "an error occurred while attempting to read the boot configuration data"
Operating medium - Windows Vista
Any suggestions, Pls? I may have to return to Techs who MAY have a Vista disk.

A:an error occurred while attempting to read the boot configuration data (Vista)

Hi Wawny,
Thank you for the post.
The error message usually indicates that the boot sector is damaged or missing.
We can try to use the following methods to troubleshoot the issue. However, performing the following steps requires a Windows Vista installation disk. If you do not have a disk, please contact your computer manufacturer or Microsoft Customer Service or to obtain one.
Microsoft Customer Service: (800) 426-9400, available Monday through Friday, from 6:30 A.M. to 5:30 P.M. Pacific Time.
Note: Microsoft Customer Service mainly handles issues regarding replacement manuals, disks, drivers and service packs, product IDs, lost CD keys, product orders, policies related to copying software on additional computers, licensing, and product registration.
Method 1: Startup Repair from the Windows Recovery Environment (WinRE)
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer. 
2. Press a key when the message indicating "Press any key to boot from CD or DVD ?". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next. 
4. Click Repair your computer. 
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next. 
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repai... Read more

15 more replies
Answer Match 60.9%


I have exactly the same issue as the person on this page, however I have already tried the three solutions and neither work, further explanation below.

I was watching a DVD on my PC last night when it began to stutter and finally the system completely froze. I would like it 5 min and then the PC would work again for roughly 5 sec before crashing again, I let this go on for about 20mins but the PC never fixed itself so I rebooted. On rebooting I got the above message.

1. My first attempt to fix it was using safemode, this however didn't work and it prompted me to use the repair progam on the Vista installation disk .

2. I booted from the vista disk and tried a start-up repair. This ran, said something was fixed and asked me to reboot. I did this but to no avail therefore I went back to the repair centre.

3. I did not have system restore turned on so this option was not useful to me.

4. I then read something suggesting I use Bootrec. However I tried running bootrec /RebuildBcd but it could not find my OS, instead I used the following commands;

* bcdedit /export C:\BCD_Backup
* c:
* cd boot
* attrib bcd -s -h -r
* ren c:\boot\bcd bcd.old
* bootrec /RebuildBcd

This however didn't work either.

5. I left the PC overnight and now things seem to be worse. When I try and use repair centre it does not actually detect a HDD with Vista installed, it does however still let me p... Read more

A:Answer an error occurred while attempting to read the boot configuration data (Vista)

If you can take the HD out and put it into another PC as Slave and see if your data is still readable.

1 more replies
Answer Match 60.9%

Unable to remote to machine at work since upgrading to Windows10.

A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 10.

More replies
Answer Match 59.22%


I have a
win7 64bit
Processor Intel (R) Core(TM) i5-2500K CPU @ 3.30Ghz 3.60Ghz
8GB Ram
Manufacture : Gigabyte
Rating: 5.0 Window experience Index

I have brought a 4 USB 3.0 2.0 PCI-E PCIE USB Port Express Expansion card

I fitted it to my pc, loaded the drivers and it was working great until I went to close down the pc, it came up with fatal error it shutdown my pc and i had to go into safe mode to remove the drivers for pci-e card. i have tried every pci slot x3 still not working.

Does anyone know what might be wrong?


A:installed 4x port usb to Window 7 pc - USB wont read + win7 "FATAL ERROR" message


Originally Posted by soash


I have a
win7 64bit
Processor Intel (R) Core(TM) i5-2500K CPU @ 3.30Ghz 3.60Ghz
8GB Ram
Manufacture : Gigabyte
Rating: 5.0 Window experience Index

I have brought a 4 USB 3.0 2.0 PCI-E PCIE USB Port Express Expansion card

I fitted it to my pc, loaded the drivers and it was working great until I went to close down the pc, it came up with fatal error it shutdown my pc and i had to go into safe mode to remove the drivers for pci-e card. i have tried every pci slot x3 still not working.

Does anyone know what might be wrong?


Check your BIOS for settings on that port you seated that pci card in.

5 more replies
Answer Match 56.7%

On boot up the laptop beeps twice and the message "system configuration data read error" appears with F1 to resume or F2 to setup. If I hit F! it boots up as normal. When I switch off and reboot the same ting happens every its driving me crazy !!

More replies
Answer Match 52.08%

"Can't read ip configuration". That is the message I get on my gateway when I try to run winipcfg. What could the problem be?

It does not have a modem and the network configuration is very simple. Bound with Tcp/ip and Netbeui protocol, having the Netbeui set as the default protocol. There is no dns and no gateway.

A:Can't read ip configuration

You might want to try uninstalling your network complonents and then re-installing them. Sometimes this helps. Good luck.

1 more replies
Answer Match 50.82%

I have an Acer Aspire M5, windows 10.
I was trying to load the Fix-it Utilities program to my computer. All goes well. Once I try to open it up, it gives me the following error. "StartupCommander was unable to read configuration for drivers. These areas will not be available". Then the program gives me an error telling me the program is not working and closes.

More replies
Answer Match 50.4%


I'm having the following problem.
is it possible to read IP address / subnet mask settings from some configuration file?
For example, the easiest way is to go to properties of LAN. But what if that hard drive is placed as secondardy HDD in another computer?
Now I need to dig into some files to read these settings in Windows XP. Can you tell me where this data is kept? Is it in registry?

A:Read IP configuration detials from some config file!?!

7 more replies
Answer Match 50.4%

When I try to open my trend micro console I get this error message:Trend Micro PC-cillin Interner Security 2007 - Unable to read your configuration...I had some kind of virus on my computer, I run trend's sysclean a few times and it cleared some away, but I stilll can't open the program.this is my HiJack This log:Logfile of HijackThis v1.99.1Scan saved at 21:40:24, on 26/06/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16473)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\brsvc01a.exeC:\WINDOWS\system32\brss01a.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\igfxtray.exeC:\WINDOWS\system32\hkcmd.exeC:\WINDOWS\system32\igfxpers.exeC:\WINDOWS\RTHDCPL.EXEC:\Program Files\D-Tools\daemon.exeC:\Program Files\LogMeIn\x86\LogMeInSystray.exeC:\Program Files\ScanSoft\PaperPort\pptd40nt.exeC:\Program Files\Brother\ControlCenter2\brctrcen.exeC:\Program Files\Java\jre1.5.0_03\bin\jusched.exeC:\WINDOWS\system32\ctfmon.exeC:\Program Files... Read more

A:Trend Micro - Unable To Read Configuration

Sorry for the delay. If you are still having problems please post a brand new HijackThis log as a reply to this topic. Before posting the log, please make sure you follow all the steps found in this topic:Preparation Guide For Use Before Posting A Hijackthis LogPlease also post the problems you are having.

1 more replies
Answer Match 49.56%

Since I am in charge of this sub-forum, I will indicate you the few steps to have a suitable security set-up, and keep having it safe.

1 - Read this guide I made. Depending of your Level of Paranoia and Expertise, feel free to include some or all of the layers.

2 - Once the guide read. Chose the security solution you think would be best for you, and don't blindly follow people advices (some are fanboys and will say their favorite is the best). Take time to read and understand what each software can do, and even trial them.

3 - Once chosen. Learn ALL the features/options of the software for a decent amount of time, I suggest 1 month as a minimum. Then you can adjust it properly to your needs.

4 - Do not change your AV every few days or week, you will never master one well enough.

5 - Do not add unnecessary security software. The more you add, the more your setup will be subjected to surface attacks, especially if you barely know if they can works together.​
Note: Once your set up has been posted, I will check it and if I find it secure, I will apply my approval stamp on your thread.

Spoiler: Stamp
Approved by Staff


More replies
Answer Match 49.56%

I am trying to assist a friend.
He had an issue a couple of months ago with someone trying to extort money for "fixing lots of issues on this machine with their wonderful application that he could buy". He realized he was being scammed part way into the conversation and broke off the communication.
He told me about the problem and I looked at his machine. I noticed that the F: Drive partition had been locked with bitlocker. I told him that I could clear the locked drive but couldn't see what was on it. I made an image backup of the system (in case anything went wrong) onto an external drive and then proceeded to re-format the F: partition. After the re-format was complete everything seemed to be okay with the machine and he had an accessible F: drive again.

About two days ago he started to receive the following message on startup:
"Startup Commander was unable to read configuration for drivers. These areas will not be available."

I downloaded the system information from his machine and have attached it below:
Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8073 Mb
Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb
Hard Drives: C: Total - 692158 MB, Free - 612120 MB; F: Total - 20892 MB, Free - 20826 MB; G: Total - 2035 MB, Free - 2026 MB;
Motherboard: Hewlett-Packard, 17F6
Antivirus: ... Read more

A:Getting "Startup Commander was unable to read configuration

6 more replies
Answer Match 47.04%

Hi,I have fundamentally the same problem as Laura H from this thread've had problems with these fake antivirus programs before and they really did a number on my laptop. I treated the problem using various tools mostly malware bytes and deleting some suspect files.Been working fine for the most part however today out out of nowhere I was attacked by malware doctor. I deleted the suspect file from the temporary internet files folder and ran malware bytes that detected trojan and deleted. Shortly after drwatson ??? was shut down and some time later I think explorer shut down because my desktop went back to theme,desktop wallpaper etc. the windows 95 look if you grasp what I'm trying to get at. I thought it was no big issue and in my own time restarted laptop when I realized audio wasn't working after trying to play a film.Upon restart I get the blue screen with the same message as Lauras. So for the most part I'm in the same situation as Laura with some minor differences such as I didn't use Spy doctor etc.I have Kaspersky AV installed which has been inefficient in protecting my laptop lately, especially from these fake AV attacks. I am using Windows Firewall which I know is a bad idea.Myrti was helping Laura resolve the issue and I have followed her instructions upto the following actions:'locate this file and right click it > choose rename > rename it to userinit.txtnow we wi... Read more

A:Malware doctor infection removal and then error c000021a (fatal system error)

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

6 more replies
Answer Match 47.04%

Hi all, I'm receiving an error message " fatal error: one or more table pointers are invalid. Modifications could be unsafe - press any key to continue"

I've just put together my new build, and have never came across this. Googling hasn't solved anything. All help is much appreciated Computer does seem to run okay when started.

Gigabyte G1 Sniper B5 mobo
Intel i5 4430 CPU
Gigabyte gtx650ti OC 1gb
8GB Mushkins blackline ram
1TB Seagate HDD.
- can be more detailed on request.


A:[SOLVED] following error on new build.&quot;fatal error: one or more table pointers are in

* Boot up the PC from your Windows installation disk * Press and hold SHIFT and then press F10 * Input "bootsect.exe /nt60 SYS /force" (without quotes) Restart the PC Note: If the above doesn't fix your boot issue then use the command "bootsect.exe /nt60 ALL /force" instead.

5 more replies
Answer Match 47.04%

Hi, I have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem. Any suggestions on what is happening?

A:STOP: c000021a (Fatal System Error)" Error Occurs

8 more replies
Answer Match 46.62%

I have a dell laptop, D620. When i first put it on the screen was loading funny. as i move the mouse over it a square at time would come in...then when i tried to boot it again. it said new user.. then it just woulnt boot got read error hit control alt delete...i called Dell they said hold fn key and hold start but it went into diagnostic mode. in a few minutes they said HARD DRIVE must be replaced.

My problem is now... that to recover the data companies want from $500 to 25oo to recover the data... is there any program or thing i can do to try to get my files back?

Marv Alpert
[email protected]

A:Hard Drive canNOT Be Read, Computer won't boot. Read Error

Hi malpert and welcome to the TechSpot Forum :wave:

As a laptop only has the ability to support 1 harddrive your option is to remove the drive from the laptop and connect it to a desktop PC using a 2.5" to 3.5" adaptor and try to read the files on it, however I would download the test tools from the makers website and run a thorough test on the drive to ensure readability of the drive.

Remember though if the drive has failed mechanically then any data may be lost and you will need to use one of the professional data recovery services such as "ontrack data recovery" to get it back.

Backup, backup and backup is the mantra when it comes to important data...

Dont put your mailing address on a forum like this by the way you will end up getting spammed to hell.

As a newbie to the site would you please take a few moments to read the following. It will help to make your Techspot experience a more pleasurable one.

Techspot FAQ.

A message for all newcomers.

SNGX1275`s A guide to making a good post/thread.


5 more replies
Answer Match 46.62%

Hey, I have Windows 7 running on my HP Pavilion g6 Laptop: Notebook Model: HP Pavilion g6 Notebook pCProduct Number: QE058UA#ABASerial Number: 5CG1390N72  Yesterday I clicked accidentally on the  Windows 10 popup dialog which appeared below right in the corner   . The system run 20 minutes and did some cofiguration,  as a result I am getting this error in the advanced boot options. coooo21a {fatal eystem error}. The initial session process or system procress terminated unexpectedly with status of0x0000001 0x000107c8. The system has been shut down I have tried several options to solve the problem: 1.Lunch startup Repair (recommended) ---> Problem signuture:Problem Event Name:         StartRepairOfflinePromlem Signature 01:      6.1.7600.16385Promlem Signature 02:      6.1.7600.16385Promlem Signature 03:      unknownPromlem Signature 04:      -1Promlem Signature 05:      AutoFailoverPromlem Signature 06:     18Promlem Signature 07:     BadPatchOS version:                             6.1.7600. ID:             &nb... Read more

More replies
Answer Match 46.62%

how can i correct to enable installation of antivirus

A:error 1603 Fatal error during installation of antivirus at 99 % instal

Which anti-virus are you trying to install?

After doing some research of the error code, i stumbled upon this:

Give this a shot, to see if this will help!


2 more replies
Answer Match 46.62%

I Own HP ENVY 4-1046tx UltrabookLast time i forced shutdown the laptop (because it got hanged!)and after that i got this errorsafe mode is not workand last know good configration disnt have any effect.sugguest a way out of this....!!!!!

View Solution.

A:Blue screen error - c000021a Fatal system error

Solved.... Solved.... n solvedby some mean (confidencial way) i have installed window in it...!Thnxx for help and suggestion.

10 more replies
Answer Match 46.62%

I'm having a problem with my sister in law's computer. Originally, she had that annoying XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message;

STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)

I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage since I'm not trained for this. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one. I have no windows CD. The computer is a Dell, and it's running Windows XP service pack 2 with Explorer 6. Heeeeeelp! Other than the F keys, I can't get anywhere with this computer.

A:Error Message blue screen of death C000021a Fatal System Error Windows Logon Process

9 more replies
Answer Match 46.2%

I think rebooting could maybe make things worse, so I figured it would be better to ask for advice before attempting to reboot again, so I don't have the scanning information required.

I began to have problems with my computer this morning (June 29). Last night I had let windows install its updates, rebooted, and left the computer on overnight. When I got up the next morning, it had an error about win32.exe encountering an error and needing to close, one of those error report ones. The first time I didn't bother telling it to send. However, afterwards the taskbar disappeared and ctrl+alt+del didn't do anything. I had to reboot manually, and then it was fine for a while until having another win32 error report, which I sent, and after which my sound failed to work for certain things. My winamp had an error about missing something and wouldn't play, and a youtube video's sound wouldn't play. I didn't have to shut it down manually this time, and the shutdown sound worked. The sound worked again afterward, but I tried virus scanning with Avira and it stopped on svchost.exe.mdmp at 22.1%, and it only found a java/openconnect.l for a ?detection?. I tried getting the task manager, and when I tried ctrl+alt+del and clicked it, it not only didn't give me the task manager at all but it took my taskbar, and then nothing else would work when clicked. I rebooted again and tried running MalwareBytes, and then after a couple minutes the screen went black and then turned blue, and had this:... Read more

A:Win32.exe error report, fatal system error later

Bump, please.
I also forgot to mention that after I rebooted the 2nd time, Google Chrome appeared on my computer, but I never installed it. So there's something weird going on there too.

19 more replies
Answer Match 46.2%

When it happens it says 'Fatal error (0xC0000005) at 0x7761E41B'
It makes a minidump file which I have attached, please read it and tell me what I have to do to stop this error and let me play my game

REDACTED ZM - 29.01.2015

A:Error when trying to play Black Ops 2, Fatal error 0xC0000005

Hey Sam, while you wait for dump analysis, run a full Scan with Malwarebytes
if necessary in Safe Mode.

Then run SFC /SCANNOW Command and establish a clean boot from the Troubleshooting Steps for Windows 7

8 more replies
Answer Match 46.2%

Hello Experts,

I have new laptop with windows 8
I installed one program that I need to work and I am getting the error: fatal error 171 while attempting to report error 171 

Troubleshooting done:
1- Reboot the laptop
2- Uninstall and install 2 times 
3- Tried to run the program in compatibility mode with older windows, even other laptop with windows 8 is working just fine
4- Tried to install MVF runtime, it didnt continue the installation but no error message appeared
5- Tried to check for windows updates, up to the latest ones
6- Tried to update MVF, but I got error messages that it cannot be installed  

Many thanks in advanced 

More replies
Answer Match 46.2%

I downloaded and tried to install Xcelcius and after a short time I get the message Fatal Error - Installation ended prematurely because of an error
When I press OK the installation closes
I use vista home basic
I tried to install using xp compatability and the same thing happens
I also downloaded the program a second time and it still happened

A:Fatal Error - Installation ended prematurely because of an error

Look at the Event log.

3 more replies
Answer Match 46.2%

Hi everyone,
This morning I turned on my PC (Windows 7 x64) and I get this blue screen error STOP:c000021a [FATAL SYSTEM ERROR].
I can't even get passed the starting windows screen it just keeps on rebooting then getting blue screen again. I've tried safe mode and last known configuration point. Both just give me blue screen after the drivers are loaded. Haven't installed anything new recently so I don't know what the cause of this problem could be. I apparently have no system restore points even though Norton would make them every scan. I can get to command prompt and that is the only thing I can get to. Is there a way I can fix this through command prompt. I think I've attached the screen it gives me and that's all I know.

A:Error code c000021a [FATAL SYSTEM ERROR]

6 more replies
Answer Match 46.2%

I put Windows 7 on an old AMD computer. Asus A8V Deluxe MB w/4400 X2, 2 GB memory and ATI X800 Video Card. It installed great and runs pretty good. Thought I would ck the error log and found a few errors I was wondering about.

Error 18 comes up twice in the error log, sometimes three times

Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 2/6/2013 4:20:16 PM
Event ID: 18
Task Category: None
Level: Error
Computer: Asus-WIN7
A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Unknown Error
Processor ID: 1

The details view of this entry contains further information.
Event Xml:
<Event xmlns="">
<Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}" />
<TimeCreated SystemTime="2013-02-06T21:20:16.140625000Z" />
<Correlation ActivityID="{6EF4F233-17D4-4302-BEBB-391D1EA8592C}" />
<Execution ProcessID="1372" ThreadID=... Read more

A:Fatal Hardware Error 18 and Processor Performance Error 6


1 more replies
Answer Match 46.2%

Hi Guys,
My win7 X64 laptop keeps freezing up. In Event Viewer I got the following message.

'The following fatal error alert was generated: 10. The internal error state is 10. schannel.

This error doesn't give me much to work on. Any help on this is much appreciated.

Many thanks

A:The following fatal error alert was generated: 10. The internal error

Hello AIRobot & Welcome to SevenForums!

Does these freezes appear when doing something specific on your machine?
Have you updated your drivers lately?

Try going to cmd (press start-orb and search 'cmd') and type this message and notice any outdated drivers:

Best Regards,

1 more replies
Answer Match 46.2%

I have no idea what is wrong with my computer its specs are
Gigabyte Z77X-UP5 Motherboard
Intel I5-3570K 3.4GHz Processor
1TB Western Digital HDD
Sapphire 7970 Graphics Card
I believe it has something to do with the Standard SATA AHCI Controller because it says its corrupt/damaged but when I try to update the driver it says it has the latest update, the computer goes to a blue screen freezes saying your computer ran into a problem and needs to restart please help

More replies
Answer Match 46.2%

I have been battling a virus(es) on my desktop for the past couple weeks. Yesterday, I downloaded and ran Spybot in safe mode. It listed 7 problems and I chose "fix selected". Spybot fixed 5 of the 7 and then prompted me to reboot to fix the other 2. Admittedly, I was brain-faded so I didn't look closely at what file names or paths it was trying to fix. Since that particular reboot, I have not been able to load windows since; fyi, I am running XP Pro. When I powerup, the computer flashes the Windows XP logo and then ultimately gives me the following message (before prompting me for login info): Fatal System Error c00021a. windows logon process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000). The system has been shut down.

At this point, I'm not sure if I have a virus problem that has escalated, causing this fatal error, or a completely different problem. I'll give a bit of a background, since it may be relevent. I run Malware Antibyte scans and Advanced System Care (ASC) scans weekly to clean up any issues, but lately the problems would reappear just hours after running the scan. So, a couple of days ago, I downloaded Avast 5 and completed a scan. I also downloaded a freeware called Teamviewer at that time, although i don't think that is part of the problem, despite the timing. Yesterday morning, when booting up the computer in normal mode, I was unable to see any desktop icons or taskbar, I only could see... Read more

A:Virus cause Fatal System Error c00021a error?

Sit tight: An experienced member of the Malware Response Team will be along to assist you.

6 more replies
Answer Match 45.36%

After solving "ntldr is missing" problem,I boot the computer.THen computer ask me to choose the operating system to start.Its screen displays following message:

select the operating system to start:
Microsoft Windows XP Professional
Microsoft Windows
Use the up and down arrow keys to move the highlight to your choice

If I choose Microsoft Windows XP Professional,error mesages will appear as below:
STOP :c000021a{Fatal System Error}
The Session Manager Initialization System process terminated
unexpectedwith a status of 0xc0000034(0x00000000 0x00000000)
The system has been shut down.

But if I choose Microsoft Windows,there will be message stating "Microsoft Windows I\O Error accessing boot sector file multi(0)rdisk(0)partition(1)\BBTSECT.DOS".

What should I do to solve this fatal system problem? Does fixing "ntldr is missing" problem cause this fatal system error?
Thanks in advance

A:Error message:Fatal System Error

sub-forum: guides & solved issues

The above forum has information on how to use Recovery Console & Windows XP CD to restore the OS. Caution, I recommend full backup to a 2nd disk. Caution, don't enter 'r' to the first decision point. Caution: next decision made should not reformat the partition. If you have the ability to clone the hard drive, then you have a spare should recovery be re-done.

Other posts recommend configuring computer to a minimum: the boot hard drive, cdrom, and 1 memory module (256MB is the minimum for XP). This is an easier first step before reloading anything.

Caution: oem restore bombs you back to out-of-the-box conditions. All data & applications are overwritten. This is different from above restore.

You did not indicate what significant changes occurred preceding the problem. Is the hard drive entering old age? Was the disk re-partitioned? Were applications closing/freezing in the days leading up to this?

1 more replies
Answer Match 45.36%

Looking for help with this. Initial research suggested making a change in the registry to solve this but I'm not that good to attempt that without support.

Full text:

Fatal Error!
Error loading EXE C: . . . \Fish Tycoon\Fish Tycoon.exe Error 2

Would also like to provide a "Hijack This" log to see what other gremlins are nesting on the drive. Seems to be running slow even with a recent RAM upgrade.


A:Fatal Error! Fish Tycoon.exe Error 2

This is not the forum for HJT logsFish Tycoon is an online gameWe can run a few scans here to see if you need to post a HJT log---------------------Please download Malwarebytes Anti-Malware and save it to your desktop.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue wit... Read more

7 more replies
Answer Match 45.36%

After some mild gaming on my HP Z420, it started rebooting on it self and at the boot screen i can now see929 FATAL MCA ARRORMLC ERROR detected CPU 0Any idea if the board is starting to act up or is the CPU, or something else?( bios 3.65, Runing windows 7, 32Gb of ram, 2TB HD and 670 GPU)

A:HP Z420 - 929 Fatal error - Mlc error detected cpu 0

no one seen this error before?

3 more replies
Answer Match 44.94%

I have a Dell E1505. I ran several virus scans today, and removed unwanted programs. AFter i restarted, this message popped up. I can no longer even get on my computer. i tried running in safe mode. Please help. This is what it says,

STOP: c000021a [Fatal System Error}
The windows logon process system process terminated unexpectedly with a status of 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.

Any suggestions on what to do?

A:Fatal Error!?

Do you have a system disk?

2 more replies
Answer Match 44.94%

I'm Running a Pentium 4 with XP Pro, my computer cant find two Western Digital Hard Drives, one a 250 GB (WD2500JB) and the other a 80 GB I use both as back up and most of the time I have I them unpluged from the IDE port, the 250 GB is like a year old and the 80 is like 6 month old.

I have try it making it my primary slave, secondary slave, secondary master and always the same result, every time I turn on my pc I heard the hard drive making a clicking sound and then a message on a black screen saying something like "Primary Slave has a Fatal Error" and the only choice it give me is to restart my system.

I have important data on both hard drive and I wish I could save it, any idea if there is a way to fix these hard drive and what the clicking noise is all about? It sound like is trying to read the drive or something.

I was thinking as a ultimate option to buy another 250 GB and a 80 GB open both of them and changing the disk from the bad hard drive to the new one to see if I could read my data, just in case that the problem is not with the physical disc that store the data inside the hard drive.



A:Fatal Error

so do either of these drives have an OS on it / them ?
im a bit confused about this .. you have them for backing up only and you have another drive with the OS on it and then u use these to back up important data ?
and as for the clicking sound . i wouldnt try using that hadr drive since you may damage it even more if you persist on trying to access it .
clicking SOUNDS VERY bad ...

3 more replies
Answer Match 44.94%

I work with a Doctor and he received a Fatal error every day he works which shuts his computer down. The error reads:

"Hardware malfunction, please contact the manufacturer - Parity check/memory parity"

Has anyone seen this error before, and if so, is there anything we can do before contacting the manufacturer.

More replies
Answer Match 44.94%

Not used for a few months, powering on and get fatal error system halted CNU94320DW - Enter Current Password. No idea what the password for this is. Tia

View Solution.

A:Fatal Error

Hi, Enter   e9lovf71td     ( 3rd character is a lower case L ) Regards, DP-K

4 more replies
Answer Match 44.94%

got a problem i don't know if its just games but when i pin a game .exe execution to my start menu or make a shortcut and put it on my start menu or when it puts the .exe on my start menu because i use the .exe alot i get a fatal error when i open it up it from the start menu it reads:FATAL ERROR-signature check failed on propertiespartner.xml.... then i close the window and it procedes to open anyways and works. it seems to only happen whith games such as bejeweled, heavyweapon deluxe chainz ect. ones a reflexive game the other a popcap game. strange thing is if i make a desktop shortcut it works fine just when i make a short cut on my start menu i have problems. any help would be really cool.thanks

A:fatal error

Hi mrm0rgan -There should not be a reason to put the .exe in these areas - Just a Right click on the item in Programs (or My Documents) and place a Shortcut on the desktop is enough -You do not need the .exe there - If you do want it there then download the program to Desktop only and take/play it from there -I also have 2 Popcap games (including Bejeweled2 Deluxe) in My Docs and just a shortcut on the Desktop -Thank You -EDITED for spelling -

1 more replies
Answer Match 44.94%

Upon startup of XP I get a "Fatal Error" message that states:

"Fail to delay load library msclib.(Win32 error:2) This program can no longer run and will terminate."

Also I can't download Security Update for MicroSoft.Net Framework 1.1 SP1 on Windows XP (KB2742597)

Any insight would be appreciated. Thanks for your help.

A:fatal error


1 more replies
Answer Match 44.94%

hi every one i have a problem with fatal eror can u assist me

A:fatal error

you need to post any error that receive in full

2 more replies
Answer Match 44.94%

Sometimes (too often) when I do a web search, and then back out of a website to my search list, I get a "fatal error" message and I have to get completely out of I-net Explorer altogether. This process has grown very tiresome. I'd appreciate any answers you might have that lead to a solution of this problem.

A:Fatal error

My IE also crashes sometimes, usually because of some demanding javascript code. Try to update your IE to the most current version and if it still doesn't help use Opera or Mozilla for your searches. They both have nice features to restrict javascript code and dont even ask about installing Active-X which makes surfing to unknown websites much safer and easier.

3 more replies
Answer Match 44.94%

2 times today i have had the blue screen pop up and I wrote this down.
fatal exception OE has occurred at 0028:C15F9A90 in VXD AF VXD ( 01 ) + 00001090

what did this mean...

A:fatal error - help

What were you doing when these errors came up?

Blue screens are sorta weird. 90% of the time they're ignorable and only require a reboot-and-forget. But sometimes they're also pretty definite indications of a bigger problem.

3 more replies
Answer Match 44.94%

Hi all, have some information from an acquaintance who is stuck. OS = ME.

He installed a scanner, "genius colorpage vivid 1200 xe"?

Now when he boots up, he get error msjs,

1 - Enum\htree\root\o

2 - Sureg createkey failed!

These are both of the "click OK" persuasion.

Beyond that, just a grey screen.

And it won't allow starting in safe mode.

Any suggestions appreciated.


A:Fatal error?

11 more replies
Answer Match 44.94%


I'm encountering a very different and never seen before error, its a FATAL ERROR: cant read necessary tables... something ...

I was installing Win7 Home premium.. After it installed it. it restarted... n i forgot to take the dvd out... After the BIOS screen was out i took out the DVD... it is showing the same error since then....

How can i Handle it...

A:Some Fatal Error

in the long run as you have disc probably much quicker to just reinstall afresh gain, boot from your cd, do a clean install

3 more replies
Answer Match 44.94%

I keep getting a blue screen and dialog that sez "fatal error-windows will shut down to keep from doing damage to your co
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Yahoo!\browser\ybrwicon.exe
C:\Program Files\2Wire\2PortalMon.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Dell AIO Printer A920\dlbkbmgr.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVTray.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVRID.exe
C:\Program Files\Dell AIO Printer A920\dlbkbmon.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\ISafe.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Microsoft Office\Office10\msoffice.exe
C:\Program Files\Yahoo!\Messenger\ymsgr_tray.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\VetMsg.exe
C:\WIN... Read more

A:fatal error

Hi and welcome. I think there may be a couple of issues in the log, but as a general rule, that error is usually hardware related.

Any new hardware additions lately? Or driver updates?

3 more replies
Answer Match 44.94%

I have a Compaq SR1250nx with an ATA hard drive. We tried to restart the computer and get the following error......tried in Standard and Safe Mode.

Fatal Error .... Windows is unable to start because the registry could not be updated....

I have a boot disc that I created with Bart PE.....I can access the C drive...but i am not sure want to do next...

I tried system restore but get same error message.................HATE it when windows does not load....may go to Linux, but kids would kill me.


A:Fatal Error

Have you run a CHKDSK /f from the command line to see if there is any damage to the hard drive?Running CHKDSK from BartPE.

9 more replies
Answer Match 44.94%

See how much this helps:

A:XP Fatal error.

Thanks Rich, but the solutions requirer my windows to run first for me to use the suggected options, trouble has no os currently and brings this screen when am trying to install xp.

4 more replies
Answer Match 44.94%

when i go to search for java error 1033, iget this error msg
Allowed memory size of 75497472 bytes exhausted (tried to allocate 71 bytes in/home/tsf/public_html/search.php on line 1033. what does that mean?

A:fatal error:

That seems to be a glitch on the searching system, it occurs sometimes.

1 more replies
Answer Match 44.94%

"fatal error! the media system on your computer is corrupt. Update your sound and video codec immediately to resolve this issue" I get this message. I found this same problem was posted by someone else. I am running PC Tools Spyware doctor and and it did not fix it the first time and in the process of running it again. Will this fix it and if not how do I fix it?

A:Fatal Error!

The process of cleaning your computer may require temporarily disabliling some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Clic... Read more

1 more replies
Answer Match 44.94%

hi all.i am trying o put on put on windows 2000,i have don the bootup part and then it gets to the it setup part where it restarts and then it coms up with:

fatal error

An error has been encounted that prevent setup from continuing.

setup failed to Install the product catalogs.This is a fatal error.The setup log filles should contain more information

press ok to view the setup log fill.

can any one help???


More replies
Answer Match 44.94%

I have a Dell E1505. I ran several virus scans today, and removed unwanted programs. AFter i restarted, this message popped up. I can no longer even get on my computer. i tried running in safe mode. Please help. This is what it says,

STOP: c000021a [Fatal System Error}
The windows logon process system process terminated unexpectedly with a status of 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.
Any suggestions on what to do?

A:FATAL ERROR! please help

6 more replies
Answer Match 44.94%

This one is something else!!! I cannot get my game "Zuma" to even start. I'll click on the desktop icon to start the game & I get this message: "Fatal Error, expecting levels tag". I restarted the system on Safe Mode with Networking & redownloaded the game & it worked fine...then, restarted the system normally & clicked on the same icon & got the same message. I disabled my firewall to see if that was the problem & got the same thing.
Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 6142 Mb
Graphics Card: ATI Radeon HD 3450, 256 Mb
Hard Drives: C: Total - 595055 MB, Free - 396982 MB; D: Total - 15359 MB, Free - 1466 MB;
Motherboard: Dell Inc., 0M017G, A00, ..CN7443193L0398.
Antivirus: COMODO Antivirus, Updated and Enabled

A:A fatal error

Nope, didn't work.

1 more replies
Answer Match 44.94%


Be working on fixing this NT 4.0 for the last two days.

I'm now trying to install the os over the old one since repair did not fix the problems

But I am getting the following message with the orig CD of the OS system (security subsystem could not be initialized.)

Before this I tried resetting the login password and still was unable to log in with the proper password

Any idea how or what I need to do to get pass the security message



A:Fatal Error NT 4.0

14 more replies
Answer Match 44.94%

Just recently i have seen the blue screen of death. I dont really know how to explain how it happens, ill be running firefox and for instance open up MSN messenger, then the blue screen will come up and my computer will restart automatically. If there is some way i can get the error log file maybe u guys can help me more.

A:Fatal Error!

Look the Event Viewer which is located in the Administrative Tools.Administrative Tools are located in the Control Panel. Start with posting only the Error messages generated in the last day or so. If this has been occurring for a while it will generate the same message since it started.

3 more replies
Answer Match 44.94%

Hi ..I got a problem to reinstalling driver using sysprep.I had used it before but it got fatal error an hour ago.How can i fix this?

A:Fatal Error

Any answer?I think my laptop in bad shape now.Cannot login as admin.. Just Guest.

2 more replies
Answer Match 44.94%

Hey tech guy!

You helped us once before and we are hoping you can help us again. we have a dell computer and are using windows xp and recently when we signed on, our desk top disappeared and was replaced by a generic warning screen saying that our computer's security was at risk. it offered a link to scan our computer but we ignored that - fearing it would futher infect us and scanned our system using super antispyware. the first time it "removed" 139 threats and we have since ran the scan three or four more times. as of this morning we are still completely unable to navigate our computer. it is currently off line and i am using a lap top to contact you.

Although the trojan.fake drop threats have been temporaily removed we are getting BatCO and Adware/80 solutions surf assistant.

what - if anything can be done to clean our computer up!?!?!


A:fatal error

6 more replies
Answer Match 44.94%

Hey my name is Erwin and I have a little problem with XP.

I recently bought a new laptop, a Dell Vostro 1720.
This laptop came with windows vista pre installed, but I'm not really fond of vista so I reformatted my partitions and installed windows XP instead (SP2).

However after Installing Xp some problems occured. Somethimes my laptop gave me a fatal error:

STOP: c000021a {Fatal System Error}
The Windows SubSystem system process terminated unexpectedly with a status of 0xc0000005 (0x75e91a76 0x00c7f5dc)
The system has been shut down.Click to expand...

I thought this had something to do with me not having all drivers installed. So I restarted installed all drivers and the problems seemed fixxed. after this I installed MCafee and Firefox and turned of my laptop.

This all happened yesterday, after having installed all drivers I got one more fatal system error however after restarting everything seemed fine.
Even today when I started up my laptop everything went smooth. I installed 7zip and after this I installed Photoshop CS4.

After the installation I tried to run photoshop and I got the fatal system error again. Now each time I startup my computer this error occurs a few seconds after starting up. I can start up in Safe mode normally.

I hope anyone can help me with this problem.

Thanks in advance.

A:[XP] Fatal Error.

How to troubleshoot a "STOP 0xC000021A" error

1 more replies
Answer Match 44.94%

i faced a problem during uninstallation of java(TM) 6 update 24, the error message is: Fatal error during installation. can anyone help me?

A:Fatal error

Version 6 Update 26 is the latest version of Java. I would recommend going through add/remove programs and uninstalling any installed versions, rebooting and then starting with Version 6 Update 26.

1 more replies
Answer Match 44.94%

I I have a hp 110 mini but it keeps saying system fatal error and asking me for a password I don't know. The error code is cnu0075hrz

A:Fatal error hp 110.!

Hi, Please try (all lower cases):         e9l11xqzb0 Regards.

1 more replies
Answer Match 44.94%

When trying to invoke my friends e-mail program (Juno) we get the following error:
Fatal Exception: A fatale execption has been detected
at Ex::Logger::log (,\Logger.cpp:41)
Caused by: Can'tOpenLogFileException: Can't open log file
"C:\ProgramData|Juno\ISP\ExecExceptions.xlg", open mode 18
Caused by: ErrnoException : Call to fopen failed with errno (13)
"Permission denied"
Click OK to Exit

When we do click OK we get the Juno program, but when clicking on "Get Mail" we get a Runtime error with no code. If we select the Browser tab we also get a Runtime error. The program just will not access the Internet. MS Internet Explorer works okay.

We have reverted back to an earlier restore date for Windows 7, have uninstalled/reinstalled Juno, copied two complete earlier Juno Folders (Program & Data) and all to no avail. Juno techies are at a loss so we are at a stand still. Does anyone have an idea as to what we might do next within WIndows 7 to fix our problem?

Thanks a bunch, Uncle Dewey

A:Fatal Error

7 more replies
Answer Match 44.94%

I was reinstalling windows and during the set up i got a fatal error. "one of the components that windows needs to setup could not be installed. The divice is not ready.
Installation failed D:\1386\asms. Eroor message: the divice is not ready".

Can anyone tell me what that means? Thankyou!

A:Fatal error! Help!


Originally Posted by z33batou

I was reinstalling windows and during the set up i got a fatal error. "one of the components that windows needs to setup could not be installed. The divice is not ready.
Installation failed D:\1386\asms. Eroor message: the divice is not ready".

Can anyone tell me what that means? Thankyou!

means there is a scratch on the CD or if its a burned CD, it was not burned correctly...

tray cleaning the cd in a propper fashion


1 more replies
Answer Match 44.94%

i posted earlier about my computer restarting on its own and then giving me a fatal error message for windows. i checked the details of it before they sent it to see what it said and it gave me to things that were being sent to microsoft. i was wondering if someone could tell me what they r. the first one is called minidump in my windows folder the other one is under my doc and settings wer3.tmp.dir00/sysdata.xml. ty in advanced for help if possible

A:fatal error

7 more replies
Answer Match 44.94%

I received a Fatal Error in IE @ 0028:c0011E36in vxd vmm<01) t 00010E36. Trojan - spy. HTML.smitfraud.c

I cant do anything on my computer to get rid of this. I cant access my virus scan program or any program or even operate in safe mode. How do I fix this?


A:Fatal Error in IE

Hello and Welcome to TSF

If you can boot it up and connect to the internet follow these instructions'

Scan your pc with one of these free online scanners:
Panda ActiveScan
RAV AntiVirus
Housecall. Be sure to put a check the box beside AutoClean.

Download / Install / Update / and Run:
Adaware SE check for any updates before running it.
Get the plug-in for fixing VX2 variants. You can download it at this SITE
To run this tool, install to the hard drive, then open Ad-aware->Add-ons and select VX2 Cleaner. Then click Run Tool and OK to start it. If it's clean, it will say Status System Clean. Otherwise, you will have to click on the Clean button to remove the VX2 infection.

Download and install Spybot S&D . Run Spybot and click on the 'Search for Updates' button. Install any updates that are available. Next click on the 'Check for Problems' button. Let it run the scan. If it finds something, check all those in RED and hit the Fix Selected Problems button. Exit Spybot. If you keep getting the DSO Exploit entries, even after you updated Windows and fixed them, then download the Spybot DSO Exploit Fix and install it over the current Spybot installation.

If you are unable to boot the system at all, slaving the drive on another pc and scanning the drive... Read more

7 more replies
Answer Match 44.94%

My Pc keeps rebooting down when I try play games or whatch stuff
and then get this error

BCCode : 100000a BCP1 : 00000016 BCP2 : 0000001C BCP3 : 0000000
BCP4 : 804FA11E OSVer : 5_1_2600 SP : 2_0 Product 256_1

A:Fatal Error

That is a "Memory Management" Issue these are associated with Hardware Failures/Faults. Try starting off by running Memtest86.

Memtest86 Instructions
Download the pre-built version of Memtest86 (Link Below) and burn it onto a CD using ISO Recorder (Link Below) after this boot off the CD and start the test going and let it run for 3-5 hours (Minimum of 7 Passes) or Overnight which is best.

Memtest86 -
ISO Recorder -

And Also Run Prime95 on all 3 tests, "Small FFT's", "Large FFT's" and "Blend". This will detect errors in minutes and automatically stop the program if it finds any. Post back once you have done these and tell me if there are any errors.

Prime95 - This corresponds to your OS which version it is 32bit or 64bit
32bit OS Version -
64bit OS Version -

1 more replies
Answer Match 44.94%

I have the message above, I'm not an expert of the computer...somebody could help me, I'm running windows XP not in the normal way.I did a scan with hijackthis...the result isLogfile of HijackThis v1.99.1Scan saved at 18.51.43, on 09/07/2005Platform: Windows XP (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 (6.00.2600.0000)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Programmi\File comuni\Symantec Shared\ccSetMgr.exeC:\Programmi\File comuni\Symantec Shared\ccEvtMgr.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\Programmi\Norton AntiVirus\navapsvc.exeC:\WINDOWS\System32\svchost.exeC:\Programmi\File comuni\Symantec Shared\ccApp.exeC:\WINDOWS\System32\ctfmon.exeC:\Programmi\Messenger\msmsgs.exeC:\Programmi\Hewlett-Packard\Digital Imaging\bin\hpohmr08.exeC:\Programmi\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exeC:\Programmi\Hewlett-Packard\Digital Imaging\bin\hpoevm08.exeC:\Programmi\Norton AntiVirus\SAVScan.exeC:\Programmi\Hewlett-Packard\Digital Imaging\Bin\hpoS... Read more

A:fatal error!

You may want to print out or make a copy of these instructions before starting, because you will not be able to connect to the internet during most of this fix.*Please download smitRem.exe and save the file to your desktop.Double click on the file to extract it to it's own folder on the desktop.*Please download ewido security suite it is a trial version of the program.Install ewido security suiteWhen installing, under "Additional Options" uncheck "Install background guard" and "Install scan via context menu".Launch ewido, there should be an icon on your desktop double-click it.The program will now go to the main screenYou will need to update ewido to the latest definition files.On the left hand side of the main screen click updateThen click on Start UpdateThe update will start and a progress bar will show the updates being installed.If you are having problems with the updater, you can use this link to manually update ewido.[*]Exit Ewido. DO NOT run a scan yet.[/list]*If you do not already have Ad-Aware SE 1.06 installed, follow these download and setup instructions. Also check for updates:Ad-Aware SE SetupAgain, do NOT run a scan yet.Next, please reboot your computer in Safe Mode by doing the following:Restart your computerAfter hearing your computer beep once during startup, but before the Windows icon appears, press F8.Instead of Windows loading as normal, a menu should appearSelect the first option, t... Read more

2 more replies
Answer Match 44.94%

i am trying to install windows XP and on installation it gives me a fatal error.

The exact error is

" Data error (cyclic redundancy check) . "

Does anyone know how to solve this problem or get me pointed in the right direction to finding a answer?

A:Fatal Error...

Somethings corrupt or possibly a hard drive getting ready to go bad. You can run the diagnostic tool from the mfg. of you hard patch.comWikipediaMark

12 more replies
Answer Match 44.94%

well i get a fatal error from time to time

and i have constant pop ups
and i have this thing that pops up saying i have a trojen virus
but i think they are trying to sell me something

i took all the steps to get here
but when running dss the program always crashes and never finishes :(

so i have the active scan log and the high jack this log
but not the dss log

active scan log

Incident Status Location

Adware:adware/searchaid Not disinfected Windows Registry
Spyware:Cookie/Casalemedia Not disinfected C:\Documents and Settings\Tina\Application Data\Mozilla\Firefox\Profiles\mom4mm2s.default\cookies.txt[] ... Read more

A:fatal error

Hi, welcome to TSF!

You are operating your computer with multiple Anti Virus programs running in memory at once:

Disable one of your Anti Virus programs.

Anti-virus programs take up an enormous amount of your computer's resources when they are actively scanning your computer. Having two anti-virus programs running at the same time can cause your computer to run very slow, become unstable and even, in rare cases, crash.

If you choose to install more than one antivirus program on your computer, then only one of them should be active in memory at a time.

There are basically two types of these programs:
On-Access and On-Demand

On-Access Scanners
As the name implies, it runs in the background all the time the PC is turned on and running. The main function of an on-access scanner is to monitor activity on your machine.

On-Demand Scanners
As the name implies, are scanners that only run when you ask them to.
Such as:
Online Scans and scanners that run on your machine but are not actively scanning your machine.

Please disable one or the other so they do not conflict.

Download combofix.exeSave it to your desktop.
Double click combofix.exe & follow the prompts.
When finished, it shall produce a log for you. Post that log in your next reply along with a fresh HijackThis log.
Note:In case you already used Combofix previously, please delete the version you are having and redownload it again, because Combofix is being ... Read more

5 more replies
Answer Match 44.94%

I got a blue screen background saying FATAL ERROR IN IE...My display options are Screensaver and settings. Thats it. I ran Hijack this and followed to tutorial. It said to post your results here. I got,Logfile of HijackThis v1.99.1Scan saved at 14:31:04, on 5/7/2005Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\ASWLSVC.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exeC:\WINDOWS\system32\ASWL2K.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\WINDOWS\System32\CTSvcCDA.EXEC:\WINDOWS\system32\msole32.exeC:\Program Files\Norton AntiVirus\navapsvc.exeC:\WINDOWS\popuper.exeC:\WINDOWS\system32\intmonp.exeC:\Program Files\Messenger Plus! 3\MsgPlus.exeC:\PROGRA~1\\agent\mcagent.exeC:\Program Files\Norton AntiVirus\AdvTools\NPROTECT.EXED:\Program Files\BillP Studios\Win... Read more

A:Fatal error in IE

Hello Phili G and welcome to the BC forums. After reviewing your log I see a few items that require our attention. Please print these directions and then proceed with the following steps in order.Step #1I recommend that you remove MessengerPlus because it has advertizing and spyware included in its installation, and MyWebSearch because it is a search hijacker that is usually installed without your knowledge or permission.Remove installed programs using Add or Remove Programs in the Control Panel:Click Start.Click Control Panel.Double-click Add or Remove Programs.Look in the Currently installed programs box for each program listed below and if it is there:Click on it to select it.Click Change (or Change/Remove) button.If you are prompted to confirm the removal of the program, click Yes.MessengerPlus (or anything similar)MySebSearch (or anything similar)Download CCleaner and install it but do not run it yet.Step #2Start in Safe Mode Using the F8 method:Restart the computer.As soon as the BIOS is loaded begin tapping the F8 key until the boot menu appears.Use the arrow keys to select the Safe Mode menu item.Press the Enter key.Step #3Start HijackThis and click the Scan button to perform a scan. Look for the following items and click in the checkbox in front of each item to select it:R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Search_... Read more

1 more replies
Answer Match 44.94%



@DN2? Enter    74eo737h8i Regards, DP-K

1 more replies
Answer Match 44.94%

i foung fatal error in installation at the time final initialization

A:fatal error

Hi anyarthu, Welcome to TSF!

Could you please give us more details regarding this "Fatal Error".
What program were you trying to install when this occurred?
Is there an "Error Message" (like 000008c) associated with it?

Answer these questions and we will be in a better position to help you.

Kind Regards,

3 more replies
Answer Match 44.94%

I apologise in advance for being a bit vague. This happened some months ago while I was abroad and a lot was going on at the time.
I was using an old computer running Windows XP when for no apparent reason I got a blue screen telling me of a fatal error and that the physical memory was being dumped, acounter showed the percentage being dumped and when 100% was reached the computer switched itself off. Amongst the various messages on this screen was one saying that if this was the first time I had seen the message to try restarting the computer.
I tried restarting and some time later the same thing happened again.
My problem:- where is the fatal error likely to be? Is it the operating system or is Windows simply responding to a hardware fault.
As I said this is an old computer and I wondered if a failing motherboard battery would cause this or perhaps a partial RAM failure.
I have another identical motherboard from which I can take all parts which might be needed or if it is the operating system I have all the necessary disks, I am hoping that someone out there can advise where to start as I still do not have much time available for trial and error methods

A:Fatal Error

When there is no idea what is causing the problem and time is short, one decisive method is to reinstall the OS and device drivers from scratch (or OEM partition or discs). If the problem goes away, it was software, if not, its almost certainly some hardware failure or conflict.

2 more replies
Answer Match 44.94%

Hi, my Dell Inspiron 300m (XP) seems to be running exceptionally slow. So, I came to the forum to seek help and when I did a search, I got a white screen with this message: "Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 71 bytes) in /home/httpd/vhosts/ on line 1155."
Can anyone help me? Thank you much

A:Fatal Error

10 more replies
Answer Match 44.94%

not sure if this is the right forum to post or not! When trying to delete programmes (that I know are no longer on my PC) but appear in Add/Remove Programmes, I try to delete and I get a message saying fatal error!
can anyone help?

A:fatal error

6 more replies
Answer Match 44.94%

Thankyou for help before hand. My OS is home xp,my background picture has gone, replaced with blue background.This is written across the screen,A fatal error in IE has occured at 0028: COO11E36 in VXD VMMC(01) +00010E36. Error was caused by Trojan - Spy. HTML. Smitfraud.c. Also i cannot do a discfrag, do a disc scan, get my spysweeper up only on start up please please help

A:Fatal Error Please help

10 more replies
Answer Match 44.94%

Gday Guys, I need to know how to fix this FATAL ERROR I keep getting when i Open Windows Media Player and Nero Applications. Ive tried reinstalling WMP but once i reininstalled Says same dam thing. Making me Frustrated

Any Help Or Ideas would be very helpful

PS Has Anyone Seen or had the same problem ?

A:How Do I Get Rid or Fix FATAL ERROR

Hi Josh,

When did this error start occuring? Did you install any software that caused it to start occuring?

3 more replies
Answer Match 44.94%

I have a hp that crashed. It's all explained in bios and motherboards under "SPEED". I have done full system recovery. At end it shuts down to reboot. In boot sequence, it logs a blue screen fatal system error c000021a. Terminate unexpectedly with status of 0xc000003a (0x00000000 0x00000000). Whats this and how do you make it go away?

More replies
Answer Match 44.94%

when i am playing pc games,it came up a message
-fatal error exception :0xC0000005 (ACCESS_VIOLATION) at 0187:6F02CAD6. to fix it

A:fatal error

6 more replies
Answer Match 44.94%

after installing xp sp2 os fatal error occur what will be the problem what are remedies have to take

A:Fatal error

Hello muthupearl

The first thing to do is to uninstall SP2

Here are 3 different ways to do it

If you can`t get into XP post back and we can try another method

Then try to solve the problem
Did the error message give any more information?

Did you make sure that there was no malware at all on the system before installing SP2?

Was your system running problem free before the installation?

1 more replies
Answer Match 44.94%

I think my Windows might be toast. I got some sort of virus and now none of my Windows icons (my computer, recycle bin....etc) opertae properly, I cannot open any folders, programs crash at startup. Icons have changed and system restore opens but to a blank white window. I cannot run a restore or anything. I am using Win XP home.

If this is reversible I would like to work through it. I do have an option of running an "out of the box" functionality restore which would save things I made with certain programs but not the programs themselves.

I can post a hijack this log later if it applies. Am I dead in the water or can you guys help me out? Thanks!

A:Fatal error?

7 more replies
Answer Match 44.94%

Hello, I am trying to load win xp into an azus eee from a flash drive that I made from wintoflash and when the windows splash screen comes up it acts like it is gonna work but I get an error message that says Fatal error an error has been encountered that prevents setup from continuing. Assembly protection error. I desperately need to get xp back in this Azus!!! Please help!!!

A:win xp fatal error

"Assembly protection error" - usually means there is something missing on the installation media or you've made some errors in creating it.

1 more replies
Answer Match 44.94%

I need help fixing "file error igxprd32" on my Dell Inspirion 1525 laptop???

A:Help-FATAL error

Try re-installing the display driver, Have you by chance installed Warcraft III? This seems to be a very commen error after installing that game

1 more replies
Answer Match 44.94%

I bought a new computer with AMD900MHZ processor and a AMR modem installed. I often get a Fatal error (blut screen) when dialing up to my ISP. Doesn't always happens but too frequently! It doesn't happen with my old computer modem. Is there a know problem with modems installed in the AMR slot on the mother board? I noticed that if I go directly to Internet Explorer first and then to Outlook for email, it doesn't error. I stil think it is related to the new type AMR modem as a friend of mine purchased the same computer and is also getting same Fatal error.
Appreciate any help!!

A:Fatal error

Can you post the exact error message, it will help alot.

3 more replies
Answer Match 44.94%

Hi got this message on my desktop after I turn on the computer it runs as far as to boot up and before the desktop sets up fully a message appears
"Fatal error" in this message box it says " an error as been encounter that prevents Setup from continuing Windows could not be updated. To this address this problem Windows must shut down Press Ok to veiw the setup log" When Ok is pressed another box appears called System Setup Log-(C:\WINDOWS\setuperr.log) this message appears on screen along with a number of other missing dll files. Then in the same box it said
Setup detected that the system file name (c:\windows\system32\ole32.dll)is not signed properly by Mircosoft.This file could not be restored to the correct Mircosoft version. Use the SFC utility to verify the integity of file. When close is pressed the machine closes down completely This only happened since I try to run Restore to speed up the computer for my children. Thank-you'

A:Fatal Error

Can you write exactly what the error message says? When does the error occur: Is it when you boot into Windows? When you shutdown? When you run a specific program? What do you mean by "it just keeps closing down"? What closes down?

5 more replies
Answer Match 44.94%

i am using laptop Hp nx6115 (windows xp home with certi
The problem i am facing is when ever i play any video it hangs & show a fatal error. sometimes it hangs in couple of min & sometimes it might be as good as 30 min. more than 10 times i have formated my lapi (c drive & also whole hd) & updated all latest drivers frm Hp site including bios but no solution yet. 2 times of the 5 fatal error i receive, windows is corrupted & sometimes even the window partion is deleted. now wht i really feel may be a ram problem as i upgraded my ram tht was 256mb & using second slot i added 512mb more & tested with hp bios memory test & result was good but still dump. plz suggest me sir solutions to my lap problem.

thanks & Regards
ravi mahna

A:Fatal Error

to TSF,

Run this HP diagnostic tool for information about your issue.

Regarding you RAM upgrade, run this scan at to make sure you have the correct memory installed on you Laptop.

For an overall look with very detailed information about your system download and review using Belarc Advisor. There is sensitive and private information within the Belarc scan result which you should not post here, it is just for your information, however tell us about your display/Video installed and make sure your Windows Updates show currently up to date.

Following the above suggestions will start you off with troubleshooting your issue.

Post back with comments and don't hesitate to ask for more assistance.

kind regards,

1 more replies
Answer Match 44.94%

while deploying the BPMN Application in jdeveloper i am getting the Problem in the SOA_Server. below is the error

Please provide me the solution.

# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000006d8d0776, pid=2292, tid=1736
# JRE version: 6.0_45-b06
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.45-b01 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# V [jvm.dll+0xa0776]
# If you would like to submit a bug report, please visit:

--------------- T H R E A D ---------------

Current thread (0x00000000254b2000): JavaThread "Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms" daemon [_thread_in_vm, id=1736, stack(0x000000002fa30000,0x000000002fb30000)]

siginfo: ExceptionCode=0xc0000005, reading address 0x0000000024256cc0

RAX=0x0000000024232b20, RBX=0x000000077f4b8efb, RCX=0x0000000000009000, RDX=0x0000000000009068
RSP=0x000000002fb2f2e0, RBP=0x0000000000000003, RSI=0x0000000000000003, RDI=0x00000000000000a5
R8 =0x0000000024232300, R9 =0x000000006d830000, R10=0x000000002fb2f4c0, R11=0x000000000000000c
R12=0x0000000000000000, R13=0x000000077f4b8f08, R14=0x0000000000000000, R15=0x0000000000000007
RIP=0x000000006d8d0776, EFLAGS=0x0000000000010202

Top of Stack: (sp=0x000000002fb2f2e0)
0x000000002fb2f2e0: 0000000000010000 000000006d8f387d
0x000000002fb2f2f0: 000000003fb16e52 000000006db... Read more

More replies
Answer Match 44.94%

I have a game "Bejeweled 2 deluxe" that when I try to open this message pops up, "Unable to prepare game executable" It was working fine from the time I installed it but two days ago it decided to pop up with this. Can you help

A:Fatal Error

How do I find a crack, so that I can copy and paste it? Also after I find the the "crack" to copy and paste, where do I put it? Thank you for your time.

1 more replies
Answer Match 44.94%

hello everybody!
i was trying to install windows xp sp2 ,but in the third step which is "installing windows" appears a notice 'fatal error 426' wich don't let me continue... what can i do please help me

best regards!

A:Fatal error 426

may you please give me an answer, please i'm bagging you , i'm waiting for...

2 more replies