Tech Problem Aggregator

Problem When Copying A DVD With Nero

Q: Problem When Copying A DVD With Nero

Hello, ive had no problems so far with regards to copying dvds, but yesterday i decrypted a dvd with DVD Shrink and then went it went to burn it using DVD Shrink i got an error saying it could not copy but all my decrypted files were at a certain location.

I thought this could have been a faulty blank dvd, but ive just gotten the same error again so i tried to burn using nero. I got the following Error, i dunno if anybody can make anything out of the error.

I hope somebody can help, thanks.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.0.2
Recorder: <AOPEN DUW1608/ARR> Version: A060 - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1613 >Version: 9YS2 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 1 DMA: On
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1613 E: CDRom0
AOPEN DUW1608/ARR F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 621MB (636780kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.2.2005
UDF/ISO compilation
19:28:01 #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

19:28:01 #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

19:28:01 #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:28:01 #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

19:28:01 #5 Text 0 File Reader.cpp, Line 118
Reader running

19:28:01 #6 Text 0 File Writer.cpp, Line 124
Writer AOPEN DUW1608/ARR running

19:28:01 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

19:28:01 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

19:28:01 #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

19:28:26 #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2286121 (508:01.46, 4465MB)

19:28:26 #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

19:28:26 #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: AOPEN DUW1608/ARR, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

19:28:26 #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Dual Layer.)

19:28:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286122 (2286122) = #2286122/508:1.47
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286122 blocks [AOPEN DUW1608/ARR ]
--------------------------------------------------------------

19:28:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [AOPEN DUW1608/ARR ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681977856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286122 | lead-out | 1 | 0x00 | 0x41

19:28:26 #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

19:28:26 #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

19:28:26 #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

19:28:26 #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 8x (11,040 KB/s)

19:28:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:28:26 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:10,277 (850277ms) -> OK

19:28:26 #22 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

19:28:26 #23 Text 0 File Mmc.cpp, Line 19451
Set BUFE: JustLink -> ON , JustSpeed : ON

19:28:26 #24 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

19:28:26 #25 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:36:34 #26 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x16 0xBD 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x16 0xBB 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

19:36:34 #27 CDR -1135 File Writer.cpp, Line 301
Write error

19:36:34 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:36:34 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

19:36:34 #30 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 1490175

19:36:42 #31 SCSI -1135 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x16 0xBB 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

19:36:42 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

19:36:42 #33 CDR -1135 File WriterStatus.cpp, Line 164
Write error

19:36:42 #34 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

19:36:42 #35 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

19:36:42 #36 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 8x (11,040 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 11:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

More replies
Answer Match 57.54%

using nero 5.5, I put an .iso file on a cd 'as .iso image'. So that it is like a regular cd. Now, I would like to make a copy of that cd, how do I do this in Nero 5.5?
 

A:Nero 5.5 copying cd

Yep, if you burned it properly, it's now just a regular CD, just tell Nero to copy it.
 

2 more replies
Answer Match 57.54%

Hi all I'm trying to copy a copied DVD using Nero 6. It completes the first part ok, but when I insert the blank disk I get a message saying 'illegal disk' and then 'could not perform start of disk-at-once' , and finally 'burn process failed' The disk I'm trying to copy from is +R, my blanks are -R (is this the problem?), my pc supports both. This is the first time I have attempted to copy a DVD. I've only done CD's previously, with no problem. Bearing in mind that I'm a novice using Nero, can anyone tell me where I'm going wrong please? any suggestions appreciated.

More replies
Answer Match 56.7%

Hello.

I wasn't sure where this belongs, so you can move this if it is necessary.

Anyway, I'd like to ask if I use Nero 9 version to copy an entire music CD to an image file, and then burn this file to a new CD -- will it result in a CD that can only play on PC?

The reason I'm asking is because I saw something about it on Wikipedia.

Plus, right now I'm using Nero 8. Is there a good reason to "upgrade" to version 9? My OS is Windows 7 Ultimate.

Thanks in advance.

A:Copying music CD with Nero 9.

If you create an image file of any type of CD, that image file will produce a copy which behaves just as the original does. Using Nero's "CD Copy" option also achieves the same result.

"Is there a good reason to "upgrade" to version 9?"

Yes, because version 8 is not compatible with Windows 7. Strictly speaking you need the latest version which is Nero Burning ROM 10 if you want full compatibility.

3 more replies
Answer Match 56.28%

Ok Here's what I'm using:
Sony External Burner DRX-710UL

Nero 6.6.0.2 Sony Edition

Magic DVD Copier 4.92

Magnavox MWD7006 DVD player

Memorex DVD+R/ DVD+R DL

Here's my situation:
I can make data dvd's with avi files that the magnavox will play (sometimes all the avi's on the disc won't play and sometimes it isn't full screen- I assume that is due to the avi's encoding, I just want all the info in here).

I can SOMETIMES make backups of commercially produced dvd's that will play in the magnavox.

I can SOMETIMES make dvd's by selecting "dvd-video" and adding files from a video_ts folder on my hard drive to the video_ts folder in nero that will play in the magnavox. Some of these are user compiled (ie: music videos fabricated to a dvd with menus, etc.) and some are dvd backups.

Sometimes the dvd will start in the magnavox and I might get the initial trailers or even as far as the menu, but the disc isn't fully functional.

So I know the discs work in the magnavox player, I just don't know why they don't all work all of the time. All of the discs work all of the time when I play them on the Sony burner.

I'm wondering in addition, if there is a problem because there might not be a region code for the magnavox to read? I cannot find a way to designate region 1 in Nero when burning the disc.

I think that's all the info needed.Thanks for reading.
 

A:Help burning/copying dvds with nero 6 please

8 more replies
Answer Match 56.28%

Last year I created a slide show project containing about 39 slide shows and 800 images using an early version of Nero (circa 2001). A few months ago my Lenovo crashed and I had to reformat it back to the factory settings. Some time earlier I had backed up all my important files to CD but somehow had missed copying the slideshow setup (for want of a better word) which meant that, although I had all the images, the slide show itself was lost.

I now have Nero 7 Essentials and the slide show plug in. I am wondering if there is any way of copying the project and its associated slide shows from the DVD I made containing the project in such a way that I can open it in Nero 7 and edit it (add images). This would save me a lot of time as all 800 of the images included subtitles and I would hate to have to create a new project and redo the subtitles.

A:Copying Slideshow Project From Dvd To Nero 7

Others will have answers, I'm sure, but if worse comes to worse you can always download the old version. I think 2001 is version 5http://www.oldversion.com/program.php?n=neroMark

1 more replies
Answer Match 55.86%

Last year I created a slide show project containing about 39 slide shows and 800 images using an early version of Nero (circa 2001). A few months ago my Lenovo crashed and I had to reformat it back to the factory settings. Some time earlier I had backed up all my important files to CD but somehow had missed copying the slideshow setup (for want of a better word) which meant that, although I had all the images, the slide show itself was lost.

I now have Nero 7 Essentials and the slide show plug in. I am wondering if there is any way of copying the project and its associated slide shows from the DVD I made containing the project in such a way that I can open it in Nero 7 and edit it (add images). This would save me a lot of time as all 800 of the images included subtitles and I would hate to have to create a new project and redo the subtitles.
 

More replies
Answer Match 55.86%

my cd burner tends to freeze while doing anything using nero 6. I got it to burn 1 cd, but after that the light no longer comes on, on the burner. could this be a power problem or something else?
 

A:cd burner freezes while burning or copying with nero 6

Does the light come on during bootup? Does the tray still open?
 

2 more replies
Answer Match 42%

Nero 2015 Classic/Nero Platinum 2015/Nero Burning ROM 2015 - released

Nero just now released NEW Versions for 2015:
1.Nero 2015 Classic
2.Nero Platinum 2015
3.Nero Burning ROM 2015
5.Nero Video 2015

Download Nero 2015 from this page:http://www.nero.com/eng/downloads/

Download offline:
1.Nero Platinium Retail Setup, http://ftp22.nero.com/Nero2015/Nero2015-16.0.02900.exe
2.Content Pack from Nero 2015, http://ftp22.nero.com/Nero2015/Nero2015-16.0.02900.exe


Homepage:http://www.nero.com/eng/downloads/
 

More replies
Answer Match 41.58%

I am using a laptop that is a HP Pavilion dv4 Notebook PC.
The OS being used is the 64-bit Windows 7 Home Premium.
 
I am trying to burn a DVD video file (.vob file) to a DVD disc using Nero Vision Essentials (Nero 9).
 
After importing the file into the project, I played the video and found that it has no sound.
 
As a result, when I have successfully burned it to a DVD disc and played this disc on my DVD player, it has also no sound.
 
Please help me fix this problem!

More replies
Answer Match 41.16%

I recently bought a new pc and gave my old to my dad,he installed his hdd in this pc and ofc the xp pro didnt work.We installed windows 7 on that hdd and it worked fine.Later he wanted to add a new xp to that HDD,when we did that the dualboot showed the old and new xp pro and the w7 was now in a logical partition,so not bootable anymore. So i used partitionmaster to copy it to a primary partition on a second HDD.After running the repairtool from the w7 disk it was running fine again.The logical partition on the first HDD with w7 on it was full, so he wanted to format that one.After formatting it and deleting the partition the windows 7 on the second HDD didnt work anymore.It starts up and than says its building the desktop.after ctr alt delete there is a menum to choose from ,with change user,taskmanager etc.If i click taskmanager there is a message saying that it is an illegal copy,withch is not true ofc.Is there a solution to solve this problem?

A:problem with w7 after copying it to other hdd

Reformat both HD's, & use this tutorial:

Dual Boot Installation with Windows 7 and XP

5 more replies
Answer Match 41.16%

I have done this before but now I have a total mental blank. Please help!

BTW: I have not tried to write a CD since installing SP2

OS: MS: XP Home SP2
Drive: Sony R/W
Media: New TDK 700MB Compact Disk

Problem: Using “My Computer.” I select a file to be copied to the CD; after getting the screen which says “write file to CD” --- I select the file and start the copy. I then get the error message that the system cannot write to the device and that it can only write to a writable CD. Thinking that the CD was not formatted I then went to command mode and entered the instruction
FORMAT F: /FS:FAT32 and after confirming the format I then got the message the device is write protected.

Looking for the correct procedure to write data to a CD

Thank you,
 

A:Problem copying to a CD

16 more replies
Answer Match 41.16%

Hello

I need to copy some dll files to my system32 but vista wont let me. I have tried enabling the administrator account but i keep getting the message that i dont have the rights to perform the action or something. Disabling UAC also didnt help anything. Vista is such a pain in the ass. I know security is a good thing but they also should consider to make it easier to work with it....... XP ftw!


TIA!

A:problem with copying ddl's

Hi tobbert,

You might want to try doing it thru the hidden admin account, but it's recommended not to use it all the time. Or you might just try taking ownership of the files, and see if it will allow you then.

5 more replies
Answer Match 41.16%

Recentlly I bought a movie dvd. I wanted to copy it to my machine and the size has shown 2.76GB. But when i tried to copy it to the machine, it has given an error message saying no enogh space in the disc.There was more than 50gb available in my hard drive.But when I open DVD in file explorer and checked the size, it has shown around 300GB file size and there were lots of VOB file shown in DVD. How ever I managed to copy two .VOB files separately but it does not allow me to copy VTS1_1.VOB file. Is this a dvd copy protection issue?Is it possible to copy this dvd?
 

A:Problem with copying DVD

Nearly every DVD today has some form of anti-copy protection on it. You just can't slap a DVD movie into the drive & copy it. Standard DVD movies [not BluRay] can be anything from a few GBs in size to slightly over 7 GBs. And that is what you'd also get if copied to the HD. Often there are VOB files on the DVD that should not be copied. Manufacturers have a fair number of tricks to thwart your efforts. You would also most likely need a dual layer DVD R disc for a standard DVD movie. BluRay is a whole other ballgame. Lot's more GBs & the copy protection is even more difficult to circumvent. Additionally, & I won't go into it here, you would need specialized software that removes the anti copy to do the rip/copy. Google is probably going to be your best friend in that regard.
One other point worth making/asking is that in this day & age of On Demand, Netflix, DVD rental stores, Redbox kiosks, public libraries & numerous other options for movies why even bother attempting the copying/pirating of a DVD?
 

1 more replies
Answer Match 41.16%

Dear,
hope you can help me with my problem.
I bought a DVD writer about a year ago and its used to work fine.
But recently and suddenly I couldn't write on it or copy file to since i get a message called (Problem Copying) said that : windows encountered a problem when trying to copy this file. What do you want windows to do? and i have the option (retry or cancel). I dont know what to do with this problem.
would you please help.
thanks in advance,
Rami
 

A:problem copying,

Not a lot you can do except run a cleaner cartridge through it and try another cable...also check the cables plugged to it are secure.
 

1 more replies
Answer Match 41.16%

My new computer, 3+ yrs. ago, came with Adaptec Easy CD Creator 4.0 installed. Since, I believe Roxio bought out Adaptec and somehow I acquired Roxio Easy CD Creator 5 Platinum although I can't find a disk in my collection. So I may have downloaded it? It has been some time since I have done any copying whatsoever so I have kind of forgotten how all this came about. Anyway, just now I attempted to copy a disk and got an intercept saying: "You have not installed this application yet. If you would like to use this application, please install it now." I don't understand because nothing has changed, that I know of, and I was able to copy the last time I used it. In checking the Add or Remove Programs section in Control Panel I find that there is an installation of Easy CD Creator 5 Platinum to the tune of 114.00 MB. I then went to Roxio, thinking that there might be an update, and found that there was. So I downloaded and installed it. But I still get the same message. Any suggestions?
 

More replies
Answer Match 41.16%

when I try to copy a cd on my cd rewriter on adaptec-easy cd creator an error always shows up. How can i fix this?
 

A:cd copying problem

You havent said what the error is. That would help !
I use <a href="http://www.nero.com">Nero</a>, much better.
 

1 more replies
Answer Match 41.16%

Hope this the right place for this question. I am trying to copy a CD which a friend gave to me with a certain big file on it, 740 MB. The problem I'm running into is the cd is only 700MB that my friend gave me and when I try to copy it to an identical CD it fails because copying 740 to 700 won't work. The weird thing is when you look at the properties of the cd with the big file on it it shows up as only using 500K of space. Now my question is: "How did the original copier of the file get the big file on the CD".
 

A:Problem Copying a CD

6 more replies
Answer Match 41.16%

Ok, I had an 80GB drive with 3 partitions on it that I wanted to convert to one partition without losing data, and I don't have Partition Magic, so I decided to use two 20GB drives I recently got off Ebay to help swap. I copied the files I wanted to the two 20's, reformatted the 80, and now I'm trying to copy the files back, but - when I'm trying to copy from one of the 20s back to the 80, my comp freezes. So here's what I did to isolate the problem:
I scanned all disks for errors (none).
I tried copying files one by one, thinking maybe it was a particular file that was problematic... discovered that small files copy fine. It's when I try to copy a large file - the "Copying" dialog box comes up with the animation showing a file flying from one folder to another - the comp freezes within a second or two of the first file copy completing. If there are multiple files being copied, the dialog box is on to the next file when the comp freezes. If there are no other files to be copied, the box closes, and the comp freezes within a second or two.
I verified that I had spare room on all drives (5GB free on the 20, more on the others). (Swapfile problem?)
I tried copying large files to/from my other drives - I can copy large files from any of my drives to any other drive - including *to* the 20 - with no problems, regardless of size.
I tried running the Task Manager and watching the CPU and RAM counters to see if they spike when this ha... Read more

A:Odd copying problem

In case this helps anyone, here are the specs on each of the three drives I have installed:

Primary IDE channel:
- 40GB (C: & D: ) Jumper set to Master
http://www.wdc.com/en/products/Products.asp?DriveID=8

- 80GB (X: ) Jumper set to Slave
http://www.wdc.com/en/products/Products.asp?DriveID=10

Secondary channel:
- 20GB (E: ) No jumper (only)
http://www.wdc.com/en/products/Products.asp?DriveID=13
 

2 more replies
Answer Match 41.16%

Okay this started happening not to long ago and I have no idea why.

I tried to click and drag items to my DVD drive to save them to a DVD-rw

When i do this, i get this message: "Windows has encountered a problem trying to copy this file. What do you want windows to do."

I tried everything I could think of.
I've been using the same DVD's as i always have, and used the same burner.

any ideas? thanks guys!
 

A:Copying problem!!

10 more replies
Answer Match 41.16%

HI,
I bought a CD today which hs some audio tracks.I want to copy these tracks on CD to my hard disk.But, the icons I see when I explore the CD are just shortcuts to the tracks (size 44 bytes each).If I try copying, only the shortcuts get copied.How can I copy the actual audio files?
Please help.

Thanks.

A:Cd Copying Problem

To get the tracks to your harddrive you'll have to rip them, not copy them.You'll find several ripping programs in our Freeware Replacements For Common Commercial Apps topic, under the CD & DVD Applications heading.

1 more replies
Answer Match 41.16%

I am trying to copy some AVI files made from a Camcorder to a DVD-r.

I am just doing this under windows by marking the file and selecting copy to cd from the menu on the left side (the same way I would moving a file to a blank CD).

It gives me the message headed "Problem Copying" Windows encountered a problem when trying to copy this file. What do you want window to do?

When I right click on the properties of the disk is says "Type: CD Drive File System: Raw Used Space:0 Free Space:0 Capacity:0"

The Disks I have are Verbatim Inkjet Printable DVD-r up to 8x 4.7gb

My Drive is LITE-ON Black 20X DVD+R 8X DVD+RW 8X DVD+R
 

A:Problem Copying (AVI to DVD-r)

You have DVD-R, your drive is a DVD+R

Some drives are very picky, try buying a small pack of DVD+R's and see if that works.
 

2 more replies
Answer Match 41.16%

Hello Again,

When I install Nero 7 and I run nero 7

It shows error message:
Nero 7 Stopped working Please Close Program.

PLEASE HELP ME!?!

A:PLEASE HELP: Nero Ultra 7 stops working after installation of Nero

Nero 7 is very old. Its probably not Windows 7 compatible.

Try running it in a compatiblility model for Windows XP.

You may even have to reinstall it in a compatibility mode.

3 more replies
Answer Match 41.16%

Hello, everyone.

I attempted to burn a video file onto a DVD, with Nero Express. However, the software only allows either bup, vob or ifo files. After googling such terms on the web, I came across several forums/communities and whatnot, where people kept saying that Nero Vision is required, in order to convert the files you want, into bup, vob or ifo (I have absolutely zero clue as to why the company behind Nero didn't include Nero Vision in Nero 12's software suite. Because without it, Nero Express is totally useless. But I digress)

I jumped on Nero Vision, but was told by the software that my project could only fit into a DVD-9.

Question 1: I have burnable DVDs for 120 min/4.7gb. Doesn't that mean that even if my project exceeds 120 minutes in length, if it still doesn't exceed the size limit, it's supposed to work? What on earth is a DVD-9, anyways?

Question 2: If you can just power on Nero Vision and immediately get your original file and burn it, why does Nero Express require all this bup, vob, ifo nonsense???

Question 3: What are the major differences between immediately burning your original file onto a DVD, and converting that into the required bup, vob and ifo formats?

Question 4: How would I go about doing that with Nero Vision?

EDIT: Realized that the only way to burn past that time limit (120 min)(My file exceeds 2 hours in length) is to decrease its quality, which I do not want to do. So I should go with the vob, bup, ifo stuff, ri... Read more

A:Nero Express. Nero Vision. DVD File structures!?

16 more replies
Answer Match 41.16%

I have an external hard drive with some files backed up from an old XP system using Nero Back Up software (files have the .NBA extension)
I am looking for a new computer and will want to install some of these files onto the new computer. Am I able to do this if the Nero software is not installed on the new computer, or will I have to buy Nero software just to add these files to the new computer? If so, is that always the case, that one must restore files using the same software used to backup the files?
Thanks.
 

A:Restoring file backed up on old system with Nero..do I need Nero

Yes, you will need to install the Nero Backup software in order to restore the .nba files.

You can try using their free version of NeroBackItUp from here http://www.nero.com/enu/downloads/ to see if that will work.

If not, they have older versions of the same free program http://www.nero.com/enu/downloads/previous-versions/nero-backitup.php

See if you can find the same version that you used to do the backup.

There are other programs you can use to do backups that don't require the same program to restore files. I use SyncBackFree to backup my files. You can use the same program to restore files, but it's not necessary. You can just copy the files back with Windows Explorer.
 

1 more replies
Answer Match 41.16%

When i click on Nero Burning ROM, it does not open at all. All that happens is i get a windows error report telling me that nero.exe encountered a problem. I have succesfully used this many times before, but one day it just stopped working.

Any idea of what is wrong?
 

A:Nero 7 Ultra Edition - Cannot start Nero Burning ROM

A simple uninstall and install might help.
 

2 more replies
Answer Match 41.16%

I am using Nero BackItUp 2.0.0.0 (Nero Ultra 7) and have been receiving "data verification failed" and "Sector NNNNNN on disc has different content to source" errors recently. On the same PC (Win XP Pro SP2), I got the errors using two different burners (an HP and a Sony) and trying both a DVD/RW and a DVD/R. FYI, I use Shadow Copy for the burn, the burn process completes without error every time (i.e. - the error only occurs during verification), and I have burned to the DVD/RW many times before without incident. More generally, I didn't get data verification errors before so I am wondering why I might be getting them now. Also, could someone tell me what, exactly, "Sector NNNNNN on disc has different content to source" means? I assume it means that the source and target files are not matching in some cases. More importantly, is it a big deal? I ran the ScanDisc in Nero CD-DVD Speed and both DVDs had 100% good sectors (0% damaged or bad). Nero log file attached.

Thanks,

Aaron Allen
Albuquerque, NM
 

More replies
Answer Match 40.74%

I copied a small file from my XP to a cd to install on new laptop with Vista Home Basic. Everytime I try to run the program on Vista it tells me to insert the cd. Why won't it save the file? Thanks for the help.

A:Problem copying cd to Vista

1. What is on the CD (data, programs, etc.?)
2. " Everytime I try to run the program on Vista ... " - what program are we talking about?
3. How do you try to read the CD?

6 more replies
Answer Match 40.74%

I've had this problem forever : when copying files using the file manager the process bombs out and says : "Cannot Copy - access denied. Make sure file is not in use or copy protected...etc", and the entire copy process is abandoned because of one file (which was not copy protected anyway).

Can this be avoided ??: Am i doing something wrong ? How do i avoid this ??

A:Problem Copying files

What is the file? just out of curiosity[It could be in use and therefore read-only], and you're trying to copy it not cut it yeah[so it's probably not that]?

A few things to check, what type of file is it? and what programs use it?
Check the properties of the file(For read-only/system settings)...
Also check who has user privelages for it? I had a problem like this before in which my user privelages were erased and only the system user had privelages to view/modify files... Also check the privelages of the folder you're trying to copy them into (if that's read only that would be a problem) sorry i'd give you details on how to do all this but i'm on vista and they would be innaccurate... All i can give is right click-> properties and have a nice long look through everything for the source files and the destination folder

Cheers,
Jamey

1 more replies
Answer Match 40.74%

hi folks,
using nero version 6 am trying to copy some mp3 tracks to an audio cd (for playing on in car cd player), when i go to open the files (for copying) in nero ,get the following error mesage -unexpected file format-
have converted a couple of these mp3 tracks to wma and tried to play them in cd player but nothing happens, have also tried them in wav, again nothing happening
anyone with any ideas (maybe am doing something wrong ) ?

thanks in advance,

jezza.
 

A:mp3 to audio cd,problem copying ?

I use Nero all the time to create audio disks from MP3 files. Unless the MP3 files are corrupted in some manner, all you need to do is open an audio compilation and drag-n-drop the MP3's on it, they'll be converted to record an audio disk.
 

1 more replies
Answer Match 40.74%

Hi,

Well, when I copy files on my external HDD, it's going fast, until the 1st file is done, after the 1st file, it doesn't really freeze, but stops for like 4-6 secs, and then it suddenly moves on again, with low transfer speed which increases. This happens for each file

e.g.





Quote:
Copying 13 files ? 300MB

{Copying speed: 35MB/s (constantly changing)

Files remaining: 13

Green bar goes up constantly}

~green bar stops moving, transfer speed rate stops changing for 4-6 secs~

{Copying speed: 20MB/s (constantly going up)

Files remaining: 12

Green bar goes up again}

~green bar stops moving, transfer speed rate stops changing for 4-6 secs~

{Copying speed: 20MB/s (constantly going up)

Files remaining: 11

Green bar goes up again}

~green bar stops moving, transfer speed rate stops changing for 4-6 secs~


and so on

I've had this problem once like.. a year ago, but I somehow managed to fix it back then, I can't remember how tho ):

P.S. I have 2 external HDDs, each worked fine until yesterday. This problem only occurs when putting data on the external HDD, not when copying data from it.

Thanks in advance,
ChrissSpirit

A:Copying files problem?

You can save a lot of time and trouble by using this;

Copy your files faster with TeraCopy

<http://www.codesector.com/teracopy.php>

Regards....Mike Connor

1 more replies
Answer Match 40.74%

I wonder if someone can help me with this problem. I have a Bridge Scoring program on my Windows 10 laptop which runs without a problem. I want to provide a copy (it's was a free program but is now no longer available) to a colleague who has a two year old laptop running on Windows 7. I copied the program onto a disk which I gave to the colleague. The program seems to load onto the colleagues laptop without a problem. However, when he tries to use parts of the program he gets two "Error 339" messages. The messages refer to component "COMDLG.ocx" and to component "MSFLXGRD.ocx". Both messages say " Component XXX or one of its dependencies is not correctly registered: a file is missing or corrupt ".

Are these 'OCX' components normally found in Windows 7 and if so what is the easiest way to restore them to normal ?. I have tried running sfc /scannow on the colleagues laptop but this showed no errors. Your help would be very welcome though I would not wish to play around in the Registry of the colleagues laptop if this can be avoided.

A:Copying Program Problem

Missing Comdlg32.ocx error while running an application?

I just searched for COMDLG.ocx missing. You can do the same for the other. Hope that helps- let us know if it works in '10.

However- do you know if the program requires registry entries? Some old visual basic programs did not.
You could try using RegfromApp (Nir Sofer) to check.

I'm going to assume you know all the possible other areas where programs may create and use folders in addition to the installation folder.

2 more replies
Answer Match 40.74%

I have Windows XP. When I highlight/copy/ text then try to paste it, only the first line shows up. This is happening every time now. What have I done wrong?? I have had no problem before???? thanks!
 

A:Copying Text problem

6 more replies
Answer Match 40.74%

I am having a weird problem...for some reason I am not able to copy some files from a data DVD that I burned. I have a series of folders on this DVD, and I am only having a issues with copying this one folder. I do not have problems copying files from any other CDs or DVDs. The folder that I am trying to copy contains a series of music album folders. When I try to copy the folder with all the folders in it, I get this error: "Cannot copy file: cannot read from source file or disc." I have researched this error and nothing comes up that matches my scenario. The problem is likely that it is Russian music with Russian folder titles. The folders with Russian characters in the title are replaced with (????) and I cannot enter these folders. Explorer says that the folders are empty. It probably has something to do with the fact that the folders had Russian characters in them, which may have caused a problem during the burning process. I have Russian and Cyrillic languages installed for non-unicode programs. The disc is perfectly clean, so I have no idea why there would be any problem. Thanks in advance.

A:Problem Copying Files From DVD

Hello mjhasbach & welcome to TSF,


have you tired to just send the file to you drive

you can right click the folder & then either select (send to ) ( like your music folder /desktop /ect...

or try the same method but try (save target as)

3 more replies
Answer Match 40.74%

I have a Lexmark All In One printer that will print but it will not scan or copy. The scan preview screen comes up a all black screen and I get an error message that says AIO.exe file has encounted a problem and needs to close. If I go in though control panel scanner and printer wizard it says An unspecified error occured while your pictures were being copied (0x8021000e) Can not complete scanner and camera wizard. I have unistalled and reinstalled the printer and downloaded the updated drivers from Lexmark's site because I don't have the disk that came with the unit. Any suggestions?
 

A:Scanning & Copying Problem

Did you inspect the all in one as the preview action is taking place? Is the scan light on, does it advance at a steady pace across the entire bed? Does the flex ribbon, if visible, look well-attached and normal? In other words does everything hardware-related look and sound functional?
 

3 more replies
Answer Match 40.74%

I have problems with my new hp laptop on windows 10

I can't find away to fix the slowness of copying files from external hdd to laptop or laptop to external hdd and i was using usb 3.0 i had same problem on my hp all in one pc and on my new hp laptop it gets bit hot that it burns my legs

If I can't try to fix it.

I want to try return it get a different brand laptop

What Brand is the best laptop?

HP, Toshiba, Asus Acer, Dell, MSI and Lenovo or Mac?

With good specs

at least 8 GB of ram

1TB HDD or 256GB SSD or Both 1TB HDD and 128GB SSD

5th or 6th generation i5 or i7 processor

2GB Graphic card

Budget $1300

is this any good?

http://www.harveynorman.com.au/comp...s/laptops/toshiba-satellite-c70-c-laptop.html or

http://www.harveynorman.com.au/comp...aptops/toshiba-satellite-l50-c002-laptop.html
 

More replies
Answer Match 40.74%

Hi

I have just built a new PC using mostly new parts and some from my original PC.

The spec is:

Asus P5K mobo
E6850 Core2Duo processor
2Gb Crucial Ballistix RAM
700W Power supply
1 x SATA 80Gb Seagate Barracuda 7200.10 boot drive
1 x SATA 400Gb Seagate Barracuda 7200.10 data drive
1 x SATA 300Gb Maxtor data drive
1 x IDE 200Gb Maxtor data drive
I am running XP Pro with all the service packs.

I have a new SATA 400Gb Seagate Barracuda 7200.10 as one of my data drives, and this is split into 2 partitions. I have further data drives also installed.

I can move and copy files from all partitions and drives apart from 1 partition on this Seagate drive. When I try to move a file from this drive, it copies the file, but hangs before deleting the original copy. Windows seems to be holding onto the file, because if I then try to shut down the PC, I get a message saying that Windows is currently processing a file and cannot shut down. I have to reset the PC to get it to restart.

If I try to copy a file from this partition and then delete the original, it works fine. I can move files into this partiton, but not from it.

It works as it should in safe mode....some sort of driver issue ?

I doesn't seem to be a physical problem with the drive as I can copy a file and then delete it.

This all seems a little wierd, I have built a number of machines but not come across anything like this before.

Any ideas would be appreciated.

Thanks
 

A:Problem copying files

11 more replies
Answer Match 40.74%

I used Roxio on my computer to make a copy of some data discs used on another PC.
Now, when any of the original discs are inserted into the other computer, they come up as a music CD and the original files apper to be missing. The only file that Explorer sees is a 1KB CD Audio Track named Track01.cda
However, the files DO appear on my computer when the discs are viewed here.

h-e-l-p-!
 

A:Weird problem with CD copying

13 more replies
Answer Match 40.74%

i'm trying to install sims 3 to my PC.

but when i tried copying TS3.exe to Drive C, this is what happens:



what will i do guys?

More replies
Answer Match 40.74%

Hello Again I did manage to crash both of the laptops had a guy come out said dell trash and will be back to try an fix other However the trouble now is i was using dvd shrink with nero had trouble copying rv so i downlaoded dvd fab dvdidil dvd dec rip it 4 me fixit4me and many more now realplayer cant read it copies to hd i cant get them to shrink dvd shrink starts to encode an disappears i would have been better off to purcash 2 of the dvd i wanted so grandkids I DIDNT STEP ON IT SCARCTH IT ETC now i wonder can i copy the downloads i paid for to a cd for future use as long as i have the key codes so i can delete this junk from pc and get back to normal i cant do a system restore tried that dvd shrink at times says invalid nav sturt and a lot more also have dvd ultr something player I PROMISE NOT TO GET CLICK HAPPY UNTILL I GET SOLID ADVISE SHOULD HAVE DONE THAT A TIME OR TO BEFORE i also bought maddog external dvd/- + cd writer and un hooked that mess
Pat
 

A:Copying dvd major problem pc

16 more replies
Answer Match 40.74%

My OS is Win7 Pro (32bit). I am copying large among of data/files (4.3TB) from different drives (RAID & not RAID) to another RAID storage system over a network (100MBit). I ran into file copying problems. Want to understand the cause of the problem and want to know how to fix it.

For example, I use window explorer to copy for example g:/DataMain/DataDate/DataGroup/Sub01 to x:/Archive/ DataMain/DataDate/DataGroup/Sub01 where there are a number of subfolders under /Sub01 and

g drive can be an external hard drive or a NAS drive (the sources).
x drive a NAS drive (the target).

All files being transfer are scientific files with a meta header and a raw image in the pixel part (similar in concept to jpg and other image types) and each file are either 2MB or 8MB in size. These files come in set and are group together as individual subfolders nested in the parent folder. To access these files, I need a special pixel viewer. Each subfolder being copied is about 2.3GB in size.

I observed these strange behavior:
1/ After the window explorer finished copying a subfolder from one drive to another, the folder size in a number of these subfolders in the target say g:/DataGroup/Sub01, do not match up with the corresponding folder size in the source x:/DataGroup/Sub01. In all these cases so far, the number of files & their sizes in the source directory, g:/DataGroup/Sub01, are larger than the corresponding target location x:/DataGroup/Sub01. Why?

2/ I have in a number of su... Read more

A:File copying problem

Since the amount of data is pretty small, it could be something like thumbnails (usually hidden) or some other small hidden files. If it were me, I use something like robocopy to do your copying, it's fast, will bypass files it can't copy and will press on, and more importantly gives a nice summary of what's been done.

1 more replies
Answer Match 40.74%

I'm having issues with font size.

Sometimes when I copy text that is in normal font [say 12pt] from one source and then paste it elsewhere it will paste in very tiny font. As small is 5 or 6 pt. This has been happening just recently and appears to happening only with certain sites.
Any ideas what is causing this and how to correct the problem? This has only been a recent occurrence.
 

A:Copying and Pasting problem

16 more replies
Answer Match 40.74%

Hello all: I have a problem that suddenly appeared last week. I can no longer copy DVDs to an ISO file using my internal or my external burners. I had just Win 8.1 at the time this first happened, now I also have Win 10 set up on a dual boot, and I didn't install any driver or firmware updates before this occurred. I ran a sfc scan on the 8.1 side and 2 or 3 errors couldn't be repaired. The weird thing is when I tried to create an ISO file in Win 10, the operation failed there as well. For software I've been using BurnAware Free and I made about 10-15 ISO files with no issues previous to this. I've tried to find a halfway decent free ISO creator to verify the error, but they're pretty difficult to find. One other thing, I also had trouble burning copies as well. Made 3 or 4 coasters before I gave up. Gregg

A:E5-772 disc copying problem

Run this in a command prompt as Administrator and then try SFC  again,DISM /Online /Cleanup-Image /RestoreHealth

1 more replies
Answer Match 40.74%

Computer has two drives. One for CD's, other for CD's and DVD's.
I try to use "Record Now" Software to copy a CD.
Problem is that I keep getting message that the blank disk is not compatible. Yet the same type disc, when I create a DVD from, say, television, will play using either drive.

So why won't the system recognize the disc when it is blank and I set it up, via "Record Now" to be the destination disc for copying?
Any suggestions on how to fix this?

A:[SOLVED] Copying a DVD Problem.

Are both CD-ROM drive (includes DVD-ROM) actually RW?

Note we have systems at work that the drive is CD-ROM+RW/DVD-ROM. The DVD function is NOT RW, just the CD.

6 more replies
Answer Match 40.74%

I have Windows XP. I want to copy files to disk. I highlight the file, click on Send To, but disk is not one of my options. And when I double click on Drive E (disk) on my computer, it says E is jot accessible Incorrect Function.

Can anyoone help?
 

A:Problem Copying to Disk

What kind of disk is your E Drive?

If it's a CD/DVD drive, is CD/DVD writing turned on in Windows?
 

3 more replies
Answer Match 40.74%

I just puchased and installed a Lite On CD-RW along with Nero express, while just playing around with it I tried to copy a small video (2.52MB) using the Video CD option and had a message come up telling me that I would need a MPEG-2 to copy the video. I found a reference to M-PEG, but I still have no idea what I need, or where to get it. Help please.

A:Problem copying video

Video-CD format uses mpeg-1 not mpeg-2 (mpeg-2 is used for DVD quality video on a DVD disc.). You must be clicking the wrong option in Nero Express. It already has an mpeg-1 encoder built in to it to convert video to VideoCD format.

5 more replies
Answer Match 40.74%

I can't copy pictures to a cd-r any longer. I used to be able to. When I copy a picture to a cd-r I don't get the message that I have files waiting to be written, and when I try to open the disc on another computer, I get a message saying that there is no disc in the drive. I can only open the picture on my computer from where I copied it. Please let me know if any of you know why this stopped working, or what the problem could be.
Thanks
 

A:Problem copying pictures to cd-r

It sounds like the burning method you're using is either packet writing (using a CD like a floppy) or multisession both of which, as you've found out, don't always work so well. The safest way to burn a CD-R is to make a one time burn.

Open the burning software you use, select the jpg files you want to burn and make a data CD. If you want to make maximum use of the CD space, wait until you have about 700 MB of data and then do the burn.
 

1 more replies
Answer Match 40.74%

I have a problem copying files to my USB hard disk. Many times, I copy a file from a laptop or PC on to the disk, no problem. When I try to open the file(s), I get an error message about restriction, and the file doesn't open. I suspect a virus. Please help.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:05:15 PM, on 2/5/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 6.0\avp.exe
C:\Program Files\Symantec\Norton Ghost 2003\GhostStartTrayApp.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\PROGRA~1\TinaSoft\EASYCA~1\client.exe
C:\WINDOWS\system32\rundll32.exe
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\Rar$EX00.140\jpeg.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\TinaSoft\EASYCA~1\Guardit.exe
C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 6.0\avp.exe
C:\Program Files\Symantec\Norton Ghost 2003\GhostStartService.exe
C:\WINDOWS\system32\inetsrv\inetinfo.exe
C:\WINDOWS\system32\UStorSrv.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Microsoft Office\OFFICE11\POWERPNT.... Read more

More replies
Answer Match 40.74%

my daughter has transferred video footage from a camcorder and burnt onto a DVD+R disc and has asked me to make copies of it.
the disc will play on my pc(with WMP) from my DVD tray but not in the CD tray;i obviously need to keep dvd disc tray clear so cannot copy accordingly. i have tried copying contents of dvd to my desktop but,after a short time of transfer,message box comes up saying-
' cannot copy VTS_01_1: data error(cyclic redundancy check)'
the files(in chapters) on the disc are all in VOB format;there is 3.5 Gb amount of files.

maybe i am missing something simple but any suggestions as to how i can do this?
 

A:Solved: copying DVD problem

6 more replies
Answer Match 40.74%

I usually go to my desktop and in the video task I would click copy this file and wait for the cd writing wizard to appear and take it from there. But now the copy this file is not on my video task, just the play all and get picture from camera and scanner for my printer. I tried to copy this file from the files and folder task and got an error message. I went to trouble shooting and it advised me to go to the administrative tools section click on services and then imapi cd burning com service and right click properties. From that to change setting to automatic then click start then ok.
Well after doing all that I can at least use my sonic recorder to burn audio files but still no luck in copying my other files to a cd.
I tried to copy files from the files and folders task but it ask me the place where I want to copy my cd. I click my cd drive and it gives a ' please insert disk into drive d' It acts as if there is no blank disk in the drive. I tried system restore and got no where.
All this trouble started after I put a brand of cd-rw I never used before to burn some audio files from my sonic recorder. I own a dell 3000 pentium 4, window xp.
 

A:Problem copying files to cds

Try using Sonic to burn data files to a cd. There should be an option to create a data disc. Then give it the filenames you want to copy.
 

3 more replies
Answer Match 40.74%

Acer sent me 4 cd disks that are known as Recovery 1, 2 and another known as Language disk and a fourth that just says 64bit. As a net book owner, there is no cd burner included. ..so in the event of a crash and etc. I have no way of getting these disks acknowledged..until I bought an external enclosure for my 40 gig hard drive. I am trying to copy these disks to my enclosure HD, which in turn allows me to insert into the usb port with that enclosure to reinstall the OS...but the first two disks have almost identical folder names...so after doing the first one, i get a message that the second one would overwrite the previous titles cause they are identical...do i want to continue...of course not. I don't think i can rename the folders of the second one to get by in the event that i need to install disk 1 and possibly be requested to add disk 2. I do have the backup on my net book ..but how would i be able to use that if it crashes? I wish others who have the Acer win7 net books would tell me how they are going about it. Any suggestions?
 

A:Problem copying OS disks

16 more replies
Answer Match 40.74%

Hi frnd's in my pc whenever i want to burn cd or dvd using nero or other burning app's .these shows only image recorder .......but i hav connected the dvd rom correctly and formatted the system but problem is same
plz send me solution

More replies
Answer Match 40.74%

Firstly I apologise if this is in the wrong section, couldnt find where else to post it..??..

I have installed Nero 8 essentials and plan to purchase Nero 8 the complete package, used only to copy and back up dvds/music/photo and data file/discs.
I find it quite annoying that Nero has converted all of my music and video clips to the Nero.MOV format, as I would much rather use what Im used of, Windows Media Player.. To use WMP I have to change each file as its used, which to be honest is starting to bug me.
Is there anyway I can alter my music/videos etc to automatically open with WMP??

Or, would I be better deleting Nero altoghter and finding a different program to back my files up??

Any advice, highly appreciated..

Thanks in advance

RICH....................

A:Problem with Nero......

Want to backup all of the files and programs on the computer try this:

http://www.acronis.com

For the Nero problem try looking thru the properties or options area and se if there is a way of chaging the default extension to something you want.

7 more replies
Answer Match 40.74%

Hi every one, I am having problem uninstalling nero 7 ultra edition.It is giving me the following message:shellmanager database is corrupt or missing than fatal error during installation.This is happening after formating my pc.What I want now is to instal back the same software and try to remov it again.Any one have this sofware in zip form .I want to upgrade nero.
Thanks
Kuti

A:nero 7 problem

I you just reformated your computer, there will be no evidence of the previous Nero Install.

5 more replies
Answer Match 40.74%

Nero 7 has been working fine and then I burned a printable cd and it worked but after that whenever I try to burn a audio cd it locks up at 5% and stays there I have to reser the computer. I tried several different disksa and same results.
Running xp with all updates.
thanks phaz
 

More replies
Answer Match 40.74%

I'm trying to burn an ISO to a CD in Nero 5.5, but it keeps telling me "unexpected exception" and doesn't burn the CD. I've upgraded the firmware to the latest version and there aren't any other programs running.
 

A:Nero problem

Hello.

I had the same problem. To correct it, I uninstalled Nero and then reinstalled it. I also updated Nero, the firmware on the burner, and the motherboard drivers. I have not had the problem since.

Hope this helps and good luck.
Robert2513
 

1 more replies
Answer Match 40.74%

When I had Nero 5.5 doing a back up audio CD took 3 mins. I upgraded to Nero 6 (same computer!) and now an audio CD takes 15 mins!!
Why is this happening? What can I do to put it right?? Thanks
 

A:Nero 6 problem

11 more replies
Answer Match 40.74%

I was using windows 98se. and then I upgraded to windows XP Pro. but the problem is, the ahead nero software doesn't work on the xp.
yes yes yes. I did try un-installing and then RE-installing ahead nero. It just does not work. It gives me those errors. I am pretty sure its just not my computer only.

I haven't come across any upgrades for nero from 98se to xp pro. may be there are and i am not looking deep enough. but why should i have to pay for small software upgrades???
anyways. ALL inputs are appreciated.
Thanks in advance.
 

A:PROBLEM. with NERO that is.

11 more replies
Answer Match 40.74%

hi, im having problems with nero. recently i gave the burning
program alcohol a try, didnt like it, and uninstalled it. I went back to using nero 5.0 , and it was working fine before. But now anything i try 2 burn doesnt work. when it starts buring, it takes about 30 seconds b4 i loose stream. and it give me the message "loss of stream"and ruins my cd. iv tried reinstalling the nero, but that doesnt solve the problem either. i think alcohol might have changed some settings or something. i think (not sure) for some reason, it might b confusing my Read Drive with My Writer Drive. Could some1 plz give me some help, thank you.
 

A:Plz help me with a Nero Problem

6 more replies
Answer Match 40.74%

I have a suddenly appearing problem with Nero 5.5. My nephew came over last Sunday and copied a couple of CD's which is not unusual. He is very good with computers and causes no problem. Today when i tried to backup the data on my computer the Burner starts out fine and then fails in the burn process. It also seems to take longer to do normal functions and also it will lock up the computer and the only way to get it operating again is to do a reset.

The following messages are displayed during the burn process:

!. Burn process started.
2. No seek complete.
3. Invalid write slate.
4. Could not perform end track.
5. Command sequence error.
6. Could not perform fixation.
7. Burn process failed.

I had another burner that I installed into the computer and got the same results.

I also uninstalled Nero and reinstalled with the exact same results. I belive that something has infected my computer but don't have a clue as to what.

Hope someone can help.

Thanks for any help you have.

Bill
 

A:Nero Problem

13 more replies
Answer Match 40.74%

ive just installed someone a external cdrw.

they have nero 5.5 which i installed.

wen i try and copy/make a cd, all it does is makes an image file.

does this mean it doesnt recognize the cdrw?

also if it doesnt work, which is the next best software to install?
 

A:nero problem

Howdy robspriggs...

Open Nero, click on Recorder, then Choose Recorder, is it showing up there ?

If not Nero isn't seeing the external CD/RW...
 

2 more replies
Answer Match 40.74%

Hi. I'm using nero a lot of time now and this error never happend.
Im burning my cd from an image file, and it says something like "Invalid block address" and then proceeds to "writing short lead-out" for about 11 minutes, only to say the burning process failed after that.
Here's the log:

manuel castelon
home


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DW-D22A >Version: BYS2 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD2000JD-00HBB0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : YA1847P CCL543N 1.0 dtscsi Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DW-D22A D: CDRom0
YA1847P CCL543N H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical me... Read more

A:Nero problem.

bump.

10 more replies
Answer Match 40.74%

Hi

Please help -

I have made a slide show on VCD on Nero 6 - this works perfectly through the PC but will not play on my DVD player - has anyone any suggestions on where I may have gone wrong? Grateful for any help

Floss
 

A:Nero 6 Problem - Please help!!

your dvd player needs to be compatible with vcd's. i have found that a lot are not. it should tell you on the box or in the manual for the player.

Hello and Welcome to Techspot :knock:
 

2 more replies
Answer Match 40.74%

Hi techsupport, nero show time is only working in administrators account, created other accounts but the same problem, error reads:- file could be corrupted or media not suitable for player. this is when playing dvd any advice???

More replies
Answer Match 40.74%

Hey,

i just got a dvd player today so i thought id make a vcd but when i go to make a vcd with vero 5.5 and select a .avi file it says unsupported file type how do i get this to work any sugestions?

Liam
 

A:Nero 5.5 Problem

hi my thread was just gettn 3 pages behind and i thought id bring it back to the first page cause i still need an answer
Liam
 

2 more replies
Answer Match 40.74%

Hi, I've installed the Nero I got with a new burner but whenever I launch it I get an error message sayiny the executable file has been changed and I may have a virus so I should scan and then it closes! I scanned and there's no virus and no matter how I try I can't get it to work. Uninstalled and reinstalled many a time to no avail. What's going on?? Its an ASUS burner and I'm running XP pro. It was working fine before I reformatted but not now. HELP!!

Ta
 

More replies
Answer Match 40.74%

I cant' burn my data files with Nero.

I already tried 5 DVD and it's no use. It said it was "Power Callibration Error" I don't know if it has something to do with Windows 7 or not but It was working properly when I use it before (on Windows 7).


This is the problem



I was using Nero 7 but then I try to use Nero 9.0.9.4 and it's just the same same problem


Any advice?

Thank you very much

A:Does anyone have a problem with Nero?

Nero 8.3.6.0 is working fine for me. I am using Win 7 64 bit .

9 more replies
Answer Match 40.74%

Hi all,

I am having a problem with my Nero 7 concerning Audio Files.

After installation it worked great but suddenly everytime i click on the "create an audio disc",it comes back with a microsoft message saying "Nero 7.exe has encountered a problem and needs to close".

I have uninstalled and reinstalled it but i just cannot get it to create an audio disc-all other options on the program are working ok.

I am running xp pro with sp2.

Any help would be greatly appreciated.

Thanks

A:Nero 7 Problem

Go to my computer and right click on the drive in question and choose properties and go to the recording tab.
Try unchecking the enable desktop recording. The built in direct cd application from Roxio has been known to conflict with NERO in the past.

2 more replies
Answer Match 40.74%

i've downloaded the latest nero in the official site. i've downloaded the english version, but somehow along the way, the license agreement is in japanese. after installation, the program group of nero is in japanese. and the file types that is recognized by nero became japanese too (when you browse explorer in detailed view). somehow the application is in english (the menus and text).

what i'm annoyed is the filetypes on the explorer. so i uninstalled it and now all my images had some Japanese writing as the filetype,so i had togoto"open with" and set it back to opening with windows picture viewer
by the way, i have installed several Asian fonts on my system. winxp. but the general language is english. is that the reason why this is happening?
heres the real problem, i uninstalled it but its still in the add/remove but it doesnt have a program folder. i tried to download it again but when i try to install it, the license agreement is in Japanese (which im sure will lead right back to the same problem). so is there anyway to get it to install in english?
thanks, as usual your help is greatly appreciated
 

A:Nero problem

Did you send an email to Nero support?
 

2 more replies
Answer Match 40.74%

hey all,

this is my first day and first question! can anyone help me with a nero 6
qusetion. whan i try to burn a vcd, svcd, or dvd, it justs locks up half way through.this just started and i cant think of a thind ive done..please help..

thanks and hi to all,,

william
 

A:nero problem

Check your available hard drive space, hard drive fragmentation and applications and services that are running kept to a minimum. What are your system specs??
 

3 more replies
Answer Match 40.74%

I had a power outage and when the power came back on I tried to use Nero, which was working fine before the power outage. Each time I try and open nero by clicking the icon on my desktop, nero opens for a brief second and closes on it's on. I have tried to reinstall nero but the problem still exist. I am not having trouble with any applications except for Nero. My anti-virus did find a virus and quarantined it but will not allow me to repair it so it is still in quarantine mode,it is called ia.dll. I am not sure what to do so if any-one can tell me what to do to get my system to running correctly please tell me. By the way I also did a recovery and I was unable to recovery back to the day before the power outage. I am using windows xp and I am on a hp. when I check my task manager it tells me that nero is running and then it says not responding and Nero closes.
 

A:Help me fix a problem with Nero

you most delate all the registry entry of nero before you can install it with no problems
 

2 more replies
Answer Match 40.74%

okay I am running winxp pro.. I have unsuccessfully tried to use easy cd creator.. so I went with nero instead.. Now i am having trouble with it. I can start to burn a cd but when it gets to about 5% or so it just sits there.. the clock is still running etc but that is about all it does.. when i hit cancel it shows that I cancelled the procedure but then the window sits there and wont go away even if i do the crtl + alt+ del the window still sits there I have to then reboot my computer because I can't open anything or do anything. any help with this?
 

A:nero problem

9 more replies
Answer Match 40.74%

I've been trying to create a Data CD of all my MP3S, Real audio etc. I have Nero 7 and had lined all the songs up to be burnt, it appeared that all the data was on the CD, however, when I played it back in my CD player only two out of about 30 tracks were on!

Any ideas why this is? I've been mixing real audio and mp3 files but I didn't think that made any difference. Some of the real files have RAM attachments. There was plenty of room left on the CD, I'd only used about 75 MB so far.

Please help!!
 

A:Problem with Nero!! Please help!

You don't tell it to create an audio file, you create a data file. I suspect your CD player doesn't play Real Media files.
 

1 more replies
Answer Match 40.74%

I lost my CDW there is no ASPI in trying to download one I found it pressed download, unzipped it from the site then nothing happened so I copied & pasted the instructions.
“This file extracts by default to the c:\adaptec\aspi directory. If you have changed this directory, please note the directory you have chosen. For Windows 98, NT 4.0, ME and 2000, use the enclosed ASPIINST.EXE file to install the ASPI layer. For Windows XP, select Start - Run from the menu, and then the Browse button. Locate the INSTALL.BAT file in the directory the files extracted to and select the OPEN button. In the command box, add a space and either XP32 for Pentium I/II/III/IV processors or XP64 for Itanium processors. The command should look like: c:\adaptec\aspi\install.bat XP32 or c:\adaptec\aspi\install.bat XP64. Then select the OK button to run the XP installer.”
Notes: I found the file in MS-DOS batch file 12-11 2001 and am not sure how to proceed these files are under operating systems and there are 4 listed no OK button just press any key to continue.
 

A:Xp Pro & Nero Cdw Problem

13 more replies
Answer Match 40.74%

HI,

I have a problem with nero burning rom. It works perfectly okay until I click the burn button then I get a blank black screen followed by a blue backgroung which says:

IOS(01)+0000186E ERROR: OE:0028:C003COEE

Can anyone shed any light as to what might be the problem?

Cubbycudlly
 

A:nero problem

Sounds like a CD-RW driver issue, since that's the first time they'd be trying to write the CD.
 

1 more replies
Answer Match 40.74%

I have the following -

- .AVI file of 658.833 mb.
- Nero 5, version 5.5.5.1
- HP 8200 series CD writer.
- 700 mb blank cd.

I tried to write the .avi file on to the cd with Nero5 so that I could have a VCD which I could play on any VCD/DVD player. But I encountered the following problems -

-When I hit the burn button on Nero, I get a msg saying "Sorry, there is not enough disk space for the required Nero cache(needed 3751mb, available 1875mb). Please free some disk space or use another caching drive."

-The VCD is much longer than 80min(from the space indicator). If I change the caching drive to my D drive(please tell me how to do that!!), how do I get the movie to be partitioned into halves and fit perfectly into 2 CDs??

Many thanks!!
 

A:Nero VCD problem

check your cache settings in nero. File->preferences click on the cache section. Check your settings there.
 

1 more replies
Answer Match 40.74%

Hi Pals.
I've been having a problem with my Nero 7. While I can burn dvd's without any problem I have a problem when it comes to cd's. Nero usually gives me an error message in Greek:
"Error Dynamic Alignment" (translating from the Greek). This happens on different cd media. Whereas sometimes it burns a cd some other times it doesn't even with the same project. I'm attaching the error log file just in case you good people can understand it, as "It's all Greek to me!!!", even if I am a Greek (hehehehe).
A million anticipated thanks pals.
Cheers.
Damian.
 

A:Problem With Nero 7

Power calibration error (from your log)

Nero say:

The cause will be either poor media, poor power, or a defective recorder.

Please try the following solutions:
Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
Try another brand of CD-R or CD-RW media.
Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.

 

1 more replies
Answer Match 40.74%

I had a problem with my Nero 6 software. When I use a RW disc (CD&DVD), with already written data in it, its not displaying the existing data in the disc. It accepts it as a new disc and when you add the new files and click 'Burn' then it says there is already some data in the disc and if you continue you will loose that data. What could be the reason???

Thanks

 

More replies
Answer Match 40.74%

I installed Nero 9 Lite a couple of weeks ago, had Nero 8 before that. Today I uninstall it, but even after it's removed, it isn't removed from the Add/Remove menu. Here are the screens to help you guys understand -


When I click them to remove them, they show this -
And if I click ok, it searches for something, if I click cancel, it removes itself from the Add/Remove Menu, but when I restart my PC, it's back there again.

Please help me guys.
 

A:Problem with Nero 9

6 more replies
Answer Match 40.74%

I am having problems with my PC. Every time I put a blank disc into the HP dvd writer the PC crahes (blue screen suggests up dating drivers) I am using nero 8 as the writing software and dvd shrink to rip any suggestions would be welcome.
 

A:Nero 8 problem I think

8 more replies
Answer Match 40.74%

i have nero 9, if i want to copy multiple files to my dvd, it wont let me! it will only let me copy one file over! please can anybody shed any light on this? thanks very much!

A:Nero 9 problem!

or failing that can anyone recommend something that will let me copy more than one file onto a dvd? thank you

1 more replies
Answer Match 40.74%

Can anyone help me have installed nero 7 premium and was working fine then nero burning rom suddenly wouldn't open so i used nero express to burn and copy on this was fine for a while but now i have problems copying, sometimes it will let me do one copy other times says it failed some way into the next copy and sometimes i don't even get as far as putting the blank disc in as it says it cant read the original disc i want to copy from even though i've copied off it loads of times before. Have uninstalled and reinstalled and run the nero fix thingy but same errors come up!!! it's all pretty random and really frustrating... can i fix this i have enough coasters and don't want to waste any more discs??????????????
 

More replies
Answer Match 40.74%

When trying to create a cd I get the error:

Unrecoverable error at 12:16.56
Unrecoverable error at 12:16.57
Unrecoverable error at 12:16.58
Unrecoverable error at 12:16.59
ect ect ect.

I am running NERO 5.5.9 and XP Professional
 

A:Nero Problem

You could try here if you can pinpoint the error.
 

3 more replies
Answer Match 40.74%

Hi. Thankyou for having such a great forum to help. I've used this a couple times with a few little glitches I have had in the past.

Firstly I apologise if this problem has been covered. I have done a pretty detailed search here, and googled it, but haven't found an answer.

I have been one of the lucky ones with running Nero 7 Ultra Edition with no problems for months.

I have created quite a few home movies and slideshows with no problems until yesterday.

When I tried to edit a home movie, the program just closed, no errors, just closed. I found it was when I tried to edit movies with transitions in AFTER I had saved and reopened it. Any movie without transitions, or with transitions but haven't opened are fine. Also still image slideshows with transitions are fine too.

It doesn't seem to care what type of video file it is, only if it has had transitions added to it.

I doubt its a memory problem (the movie I really want to edit isn't that long, I have edited ones much longer). I have downloaded a couple of 3g convertors, so I'm unsure if they have caused a problem with codecs?? (I'm not really up to date with codecs, I need to understand them a bit better before I start playing around with them) All my other media programs, including Windows Movie Maker work fine.

I really don't want to do a system restore unless its absolutely necessary. I haven't tried reinstalling Nero yet. I guess I will have to get the cleaner on the n... Read more

A:Yet, another Nero problem

9 more replies
Answer Match 40.74%

I need some help. I am running Windows 98. I have Nero 5 cd burner. Never had any problems with it until now when it comes to reading cds or burning a cd. I burned a cd the other day and everything was fine. My grandmother gave me a cd for my mom to listen to, which came from UK. I placed it into my burner to play it (sometimes I use it instead of my CD rom) and it played fine. Well, I tried burning some songs from my MP3 files onto a cd (and I've used the cds plenty of times before) and it's only burning a few songs. For example, it got to the 14th song then said Failed Writer Error. So, I tried burning the songs again, this time just 10 at a time, made it to the 8th song then said the same thing. I put the cd into my dvd player to see if the songs would play, and they played and stopped where the burning failed. I'm wondering if the UK cd was formatted differently and has messed up my burner? And if so, can it be reformatted or something? I tried reinstalling it and that didn't work either. Someone please tell me what the problem might be. Thanks in advance.
 

A:Problem with Nero 5

6 more replies
Answer Match 40.74%

I have developed a problem with nero 6, when I try to burn a nero image file I get the following message (cannot write track at correct position with this recorder.
please help.
sacky
 

A:Nero problem

Have you been able to burn this type of images before with this (exact) version of Nero, using the same burner and the same kind of media?
 

6 more replies
Answer Match 40.74%

hi there!
can anybody tell me please what that means:dvd video file compliance test failed.
i get this message when i try to burn my dvd backup
thanks for help
matrix
 

A:nero problem

Read this site http://www.nero.com/en/632173744289565.html#3
 

1 more replies
Answer Match 40.74%

I posted a question on Feb 27 or 28 but I can't find it anywhere and don't know if it has been answered!
How do I check?
 

A:Nero Problem

7 more replies
Answer Match 40.74%

When I try to add an .mp3 to burn I get an error message reading "Out of Memory." The program then proceeds to crash. Any ideas?
 

A:Another Nero problem

6 more replies
Answer Match 40.74%

undefinedundefined

I am unable to detect my cd writer as a recordable device in nero it will only give me an option for an image writer. When I checked the drive it say the device was working properly i m using Nero 5.5.1.9. Thank you
 

A:Problem with Nero

Welcome to Techspot!
It is always best to fill out your 'Profile" with your equipment and O/S , you will get faster and better advice.
Did Nero ever work or were you just loading it for the first time.
Is your version of Nero the most recent ?
Does your cdwriter have the latest 'firmware"
These are the two most common solutionsto your issue.
 

2 more replies
Answer Match 40.74%

Dear All,

I have the CD Writer CTX 52*24*52 , on Win 2000 Professional.
I am using nero 5.5 .....

The probelm is :
When I use Nero to copy 5 files, the process is done successfully.
But when I want to copy more than 5 or 6 files , the process fails at simulation stage, but even though it is simulation, the CD writer light becomes on and off, and the whole system goes hanging... and it wastes the CD and
we should restart the computer..... ((((((
Could someone pleeeeeeeeeeeease help ?

Than you in advance,
Bita
 

A:Nero 5.5 problem

6 more replies