Tech Problem Aggregator

Counting Printed Pages??

Q: Counting Printed Pages??

I have Windows 98SE with a HP 842C Deskjet printer.
Does anyone know of any program that would allow me to see how many pages I have printed since the last ink refill?

A: Counting Printed Pages??

Bump

1 more replies
Answer Match 70.56%

Whe printing multiple copies from Word 2003, (SP-3) Service Pack 3, all pages come out of the printer blank. This happens on my Canon Imageclass MF5550 printer but not on my HP 8100 inkjet. Printing from email, wordpad and notepad work. I reinstalled Word and the Canon printer driver to no avail. I called Canon tech support and they had me print from Wordpad and since it worked they said it's not their problem.

More replies
Answer Match 65.1%

Don't print much multi page output, so am NOT sure when this problem began.

Originally, the pages on my HP DJ855C were printed as expected: page-1 first, then page-2, etc; this resulted with page-1 being on the bottom of the stack. Depending on the application being used, there was often a Print-Order option available for Back-to-Front printing so that the last page would be printed first and then page-1 would be printed last and be on the top in the stacker.

NOW, things seem to have reversed:
If I do NOT ask for the Back-to-Front, then I seem to get it anyway (i.e., page-1 last and on the top). but if I want the original order (i.e., page-1 first and on the bottom) then I must use the Back-to-Front option.
It seems as though the default has become Back-to-Front and then selecting the option for Back-to-Front re-reverses the order and the result is Front-to-Back.

Possibly this reversal happened when I went to Win/XP; possibly it happened with the installation of some piece of software.

Q. Has anyone else had this exxperience?

Please tell me where I might change some parameter to make the option of Front-to-Back actually print the page-1 first like it did originally?

Any advice apprecaited.

Thanks,,

A:Order of Pages Printed

Digger,

Go into your printers and faxes options off of your start menu.

Select your printer, right click the mouse and click on printing preferences.
On the features tab at the bottom there is a option for start printing from last page. If there is a check mark in the box next to it, click there with the mouse and uncheck it and then click on apply and ok and you should be all set after that?

1 more replies
Answer Match 65.1%

The problem I am having is that when I go to print tax return forms from the IRS site or New York Tax Dept site, the form prints "short", that is, the last four or five lines of each page do not print.

You cannot save the data in these forms, they will only save as a blank form. Your only option is to print it.

However, although Adobe tells how to cure this problem ( by clicking File-Print and going down the menu which comes up to "printer scaling", then chosing "print to fit page", this only works if there is a
FILE menu on the left hand side of the page.

In these tax sites, the forms do not have a tool bar above allowing you to chose a FILE menu.
You can right click the mouse and chose PRINT, however it will print a cut off page.

SOOOOOOO ..how do I either:
1. Get a standard Tool Bar to appear on top of the form, on these web site pages, or
2. use some other device or method to print these documents to fit the page.

If any of you are about to suggest right clicking on the printer icon PRINTERS, in the control panel, forget it....my printer does not bring up anything about "Print Scaling".

Hopefully, some geek out there will read this and solve my problem. Thank you. 44 Guy

A:printed pages cut off at bottom

Every computerized tax form that I have seen...is available at the website of the sponsoring governmental agency...and reflects a printed version option which has resulted in everything being printed properly.

I'm not sure where Adobe figures into tax preparation.

If you are using a 3d-party app to do taxes...then the problem resides with the support for that application, IMO.

Louis

http://turbotax.intuit.com/support/iq/TurboTax/Install-Adobe-Reader/GEN12226.html

4 more replies
Answer Match 64.26%

Hi, when I print anything from the web (Amazon receipt for example) the 'Print preview' and actual hard copt print appear as source code (similar to lots of DOS type commands etc) and very small print size. Only happens in Internet Explorer 7.0 -tried using Firfox and that appears okay- any suggestions -anyone? (thanks in anticipation)
 

A:Printed Web pages appear as source code?

open IE, click tools > internet options > advanced tab

click the reset button

This will put everything back to default options and all is good!
 

2 more replies
Answer Match 64.26%

Hello TSG!
I am looking for a solution (maybe a registry setting) to not allow XP to print, say, more than 30 pages in any one print job. Any ideas?

Thanks!
Curtis
 

A:Set Max Number of Pages to Printed at a Time

Any ideas? Found some software online that is far beyond what I need.
 

1 more replies
Answer Match 64.26%

Other than using View>Text Size, is there anything I can do that may cause the print to be darker? I know that my eyes are beginning to grow weaker but perhaps someone knows a trick for me to use or an answer. The light print seems to occur on most web pages and very bad on my ISP webmail account. My signature will tell you I am using WinXP Pro and SP2. If all pages were as clear and dark as the print I am seeing while typing this thread, I would not be asking for help. As always, TIA
 

A:Solved: Pages Appear To Be Too Lightly Printed

7 more replies
Answer Match 63.42%

When I print I am getting a blank page between each printed page. Even if my document is one page it prints a blank page after it. I can also print a selected page, as in "print page 2" but it still prints a blank after it. The blank page does not show up on the preview.

I have a HP Deskjet D1300 and am running Vista Home using Word 2007. Is it a printer problem or a Word 2007 problem? Any suggestions?
 

A:Getting un-wanted blank page between printed pages

I think you may have the printer set to print separator pages.

Look around in your printer properties (Control Panel>Printers>Printername>>Right Click>Properties) and disable.
 

1 more replies
Answer Match 63.42%

Hi All, Please Help !!!!!

I set the printer to Fast Mode. After few month used, now every day morning I print.
The first few pages printed are not clear (especially black color), then the following pages are printed fine. Why ??????
 

A:HP BusinessJet 2200 First Few Pages Printed Not Clear

I'm guessing that the ink jet ports are drying up over night and it takes a couple of pages being printed before the ink is flowing correctly. I think using fast (draft) mode send less ink to the heads or less ink is available because you are printing faster.
 

2 more replies
Answer Match 62.16%

Hello everyone

I recently installed Outlook 2010 and I have got the following strange problem and I was wondering
whether anyone else had the same problem and found a solution.

Whenever I print an Outlook email, the pages come out in reverse order (page 2 then page 1) with a blank cover page which sometimes has "Microsoft Outlook - memo style OUTLOOK.EXE" printed
on the middle of it, and a blank sheet between each page of the message.

It only happens with Outlook. Printing is normal with Word, Excel, etc.

Any suggestions, please?

A:Outlook 2010 emails being printed with blank pages between each page

In Outlook please go to File - Print, highlight Memo Style, then click Print Options button above. In a new window Print, hightlight Memo Style again. Click Define Styles... In a new window, make sure that Memo Style is hightlighted and click RESET button.

If this wont help, click Edit button in the same window, and make sure all the parameters make sense and are correct (page size, etc.)

3 more replies
Answer Match 62.16%

Hi
We have a need to find out quickly who is printing and how mucha are they printing to a particular printer. We enabled logging of all spool activity to the event-viewer which records all the printing which takes place through the Printer and gives quite a concise description of what was printed. Is there a way that we could transport this information to some sort of a file where we could get a clear indication as to who has printed and how much as well.
 

More replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 40.32%

How I can change the name that appears at the top of email messages when I print in Outlook 2002?
 

A:Name at top of printed emails

6 more replies
Answer Match 40.32%

This is something that has been bugging me for a while now, and I've been unable to solve this problem. Perhaps someone out there can provide some guidance.

Sometimes, I'm unable to print things (such as online coupons) because I'm told that my printer is set to "Keep Printed Documents." I've tried disabling this setting via the Advanced tab under the printer's properties. However, when I do this, click Apply then OK, and close the tab, the setting automatically reverts back to "Keep Printed Documents". Does anyone know why this is happening? It's sort of frustrating to not be able to set the printer settings the way you choose.

I appreciate any tips/suggestions you might have. Thanks!

Bubba
 

A:Keep Printed Documents

9 more replies
Answer Match 40.32%

hello i was trying to figure out how to count the number of letters in an inputted line of text and display letter by letter how many of each there were..any ideas to help thanks
 

A:counting

9 more replies
Answer Match 40.32%

DON"T MISS OUT ON THIS OPPORTUNITY!!



Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

More replies
Answer Match 40.32%

Hello from No. Carolina. I surely hope someone can help with this. I renewed my Uniblue SpeedUpMyPC license last night and now every time I enter my Yahoo! e-mail user name and password I get redirected to a blank page! Suggestions?

A:I'm Counting on Y'all

Have you checked with Uniblue's support page? http://www.liutilities.com/support/

1 more replies
Answer Match 40.32%

Hi,

Not sure if this could be done...but is it possible to make a script that would tell you the most amount of people that were online at your forum by counting the profile urls in the source code, then displaying the amount and time and date, then it would change if the number increased?

Or could there be another way of doing it?

Thanks

Peter
 

More replies
Answer Match 40.32%

DON"T MISS OUT ON THIS OPPORTUNITY!!



Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

More replies
Answer Match 39.9%

Whenever I print out an email from someone, the resulting document prints my first and last name (Outook Express) in the top left corner. I would like to orevent this but have searched in the Options and cannot find how it got there or how to permanently remove it. Can someone please tell me. Thank you.
jy
 

A:My name on printed emails not wanted

It is using your user name for the header.
You can change this in the account settings.

Not sure if you can turn this off.
 

2 more replies
Answer Match 39.9%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?

Thanks
Pam

A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:

SOLUTION:

When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"




I love Myriam the little bunny

1 more replies
Answer Match 39.9%

Hi all,

Well not sure if this is the right area for this but not really sure what the problem is.

When I boot my PC during the bootup dos stage I hear my PC making noises, it still boots up Windows 7 ok but as soon as I open something I get continious R type accross my screen, If I hit the caps lock it changes from R to r.

Thought it was my keyboard having the R locked down so tried to fix it, no luck. Changed keyboards with my spare one no luck. Disconnect all keyboards no luck.

So where is this R coming from, its impossible to us my PC at the moment as soon as you click somewhere (word, exel, Google etc) an R/r appears.

Any ideas where to start?
 

A:Continous R being printed in Windows 7

8 more replies
Answer Match 39.9%

I'm new here!

First I would like to say I'm a TBI survivor and I'm a male and 42 years old .
I was purchased an emachine computer with a Lexmark lasar printer,
Whenever I go to print something, be it a web site article or a personal document that was created using Microsoft Works Word Processor. Whatever is being printed my name appears at the VERY top and the city and state printed at the bottom.
I know little about computers so I'm trying to get an answer why this is being printed.
The only thing that I can come up with is MY NAME, CITY and STATE was somehow entered on this computer's Hard drive and is prints it because it's been entered by someone at the store before iyt was brought home and set up for me.

If there is someway that I can delete this info. being printed, PLESE tell me what to do EXACTLY!

Thank You!
Chaz-62

A:I'm new her! Why is my name, town and state being printed?

That's very strange, it sounds like a 'Header and Footer' has been set up with that info and is in your normal.dot template. (If Works uses such a template, I know Word does).
Try doing a Find (or Search depending on your version of Windows) for normal.dot and rename any found to normal.old. Then test the printing again. If there is a problem you change the names back again.

hth

3 more replies
Answer Match 39.9%

when i tried to print photo from (user administrator)windows7 photo viewer there appear print picture windows without photo preview(seems busy) and after some seconds five repeated error messages "your picture cannot be printed because of this error occured" appear. It is working in user account Guest. printer and its driver is okay(updated). whats wrong with my windows 7 photo viewer? please help me

A:your picture can not be printed because of this error

From Windows Answers:






I believe it is a problem with the "photowiz.dll" file in system32. It is version 6.x.xxxx.xxxx. I found an older version of this file, had to change the attributes and permissions of the file to allow it to be changed. I renamed it with an "dlx" extension and then copied a version 5.1 photowiz.dll to system32 and the print wizard works again! The site I got the file from is: http://www.dlldump.com/download-dll-files_new.php/dllfiles/P/photowiz.dll/5.1.2600.2180/download.html



Try Googling your problem first. Hope that helps

7 more replies
Answer Match 39.9%

When using my picture it! publishing....when I add a border to a picture it comes out distorted when I print them out. With no border it prints out great.

Any ideas why this is happening?
 

More replies
Answer Match 39.9%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/
 

A:Scanned document when printed out........

16 more replies
Answer Match 39.9%

Hello Team, When I am trying to select eqal (=) to button on which it is printed, it is not getting typed whereas when I am selecting some other button eqal (=) is getting printed. Please help me in solving this issue. Regards,Nizam

More replies
Answer Match 39.9%

I am unable to print pictures completely. I print them from Picasa on HP photosmart C4250. When I try to print, although the preview is correct, the printed result is not. Part of a picture will come out, or the image starts at the end of the paper and is therefore incomplete. Until now, everything worked properly.

soslow24
 

More replies
Answer Match 39.9%

I have 3 print queues that are retaining the printed jobs in the queue and every now and again the damn thing prints all the job again. I have checked that the keep printed jobs button is NOT checked/selected, but the queue acts ilke it is selected to keep printed jobs. I have 125 printer queues and only 3 act like this and they are set up identical to the others. I have reconfigured this twice on all 3 and they still act like they are set to keep printed jobs in the queue.

Anyone seen this and know of a solution, on the Microsoft site I am seeing posts but not a single reply about how to either run a job to clear them out a couple times a day or fix this so they act as configured. To NOT keep printed jobs in the queue.

Any help as always is much appreciated.

The race to solution is on, let's see who can figure this one out first.
 

A:printed job remain in queue

7 more replies
Answer Match 39.9%

hello all,
Im using access 2010 and there is a print of a report like a certificate whenever needed. My office is requesting me to provide a report of all certificate printed including the date and to whom .
my only way to do this is to force users to enter a field print (yes/no) and from there the query "yes" and the report be printed.
Is there any way to do this without forcing the user to enter the yes/no. field.
Thanks
 

A:Try to record printed records

6 more replies
Answer Match 39.9%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?
Chuck.
 

A:Solved: Printed name on paper

16 more replies
Answer Match 39.9%

Other than dogging the print preview, and struggling with the size in any pertinent image editing software, has anyone found a reliable way to limit or control the size of a printed web document?
to wit:
I scanned an odd shaped document, 3x8" to email to myself at another site, and the printed form was big enough for two pages. What a waste.
I print receipts regularly and they, 99% of the time have a "trailer" on a last page that has stuff like web site address or URL, a Secure Website emblem, or other, clearly unnecessary printing. My introduction to Windows word processing (WordPerfect) had, and I still use, a "makeitfit" command. Invoking such a command AUTOMATICALLY when printing from the web seems like a simple, brainless way to conserve paper...it'll give me a fractional font (e.g. 11.9 vs. a 12) and would prevent the idiotic tendency of a printed page to only have the leftward 80%, l which leaves off the important stuff like the prices...(you gotta print landscape to avoid this)
And I thought a computer was to make life easier, boy was I ever misled)
 

A:printed size of web documents

The problem is that web pages are usually coded to make them look good on screen, and that tends to make them "unfriendly" when printing.

Web pages designed for printing do exist, and it works well in those (few) cases.

Cutting and pasting into a word processor is sometimes the only workable solution.
 

2 more replies
Answer Match 39.9%

Windows 10 is coming SOON!!
If you are eligible for the free Upgrade offer you can reserve the DL for the GA. You will need W7 SP1 or W8.1
Make sure your machine or machines are clean & healthy.  Always backup, backup & backup.  Recommend making a Sys Image just prior to final release 
GA-Day is July 29
Cheers,Drew
PS:  Did I mention backup?

A:T- Minus 33 & Counting

I see the first topic in the Win 10 section is dated 1st October 2014. We have had nine months of mumping and moaning about the various test releases. As well as a lot of hot air there have been a number of serious and valid points raised - the purpose of the test releases.
 
Another month and we can all start mumping and moaning about the final release version !
 
I'm chicken !  I intend waiting at least six months before I consider updating from 7 to 10, and that will be dependent on whether or not I decide to rebuild my computer.
 
Chris Cosgrove

3 more replies
Answer Match 39.9%

my Xp is behaving like a couple of bunnies. it was 53 , then 56 now 64
processes operating that i am not sure of. reid (of the forum)looked
at the 56 hjt log and said everything was legiit however my pc runs too slow. it takes 2 minutes after you click on something for a response

dont know what to do

glenn

A:64 processes and counting- help!!!!

What are your system specs? PC Brand and model number, OS, cpu, amount of memory?
Also, do you have alot of icons in your task bar next to clock in the lower right hand corner of your monitor? If so, you can disable the ones you don't need running and that'll free up some resources.
Defragmenting your hard drive my also help speed things up.
To start off post your system specs and a list of items that running in the task bar.

17 more replies
Answer Match 39.9%

i posted a thread yesterday, but got no replies, i have heard this forum is great, so i hope you can help me.
im having a few problems..

1. i have constant pop ups (have had 9 since beginning this thread..10)

2. i cannot save any new files, pictures, or anything. and its important that i do, i am a marketing advertiser and i really need to be able to work with my pictures and graphics.

3. i randomly hear some sort of sports radio channel through my speakers, even with my internet browser closed. sometimes its a poker channel, sometimes its baseball, just 10 minutes ago it was a stupid "guess what candy bar your tasting" thing. the only way i can stop it is to restart my computer.

4. my task bar disappears randomly and comes back maybe 20 minutes later. (as im typing this i dont see it)

5. my computer is running extremely slow. ive never had this problem.

6. ive tried running my spybot search and destroy, adaware, and kaspersky, and all 3 of them stop in the middle of the scan saying there was an error, and my computer shuts down.
if i can get some kind of help, i would greatly appreciate it. i dont want to lose any of my programs that i have paid for. i dont want to lose anything, and i cant afford to go out and buy a new computer.
 

A:7 problems and counting, please help me!

6 more replies
Answer Match 39.9%

Hi,

I have a class called colouruser that changes the link colour of certain member's names. These names only appear in 1 table but mixed with other members names that don't have that class. How can I count the amount of members that has the class="colouruser". The class is in the A tag...

<a href="member url" class="colouruser">name</a>

Thanks
 

A:counting class

This should do it.

http://www.faqts.com/knowledge_base/view.phtml/aid/2193/fid/128
 

1 more replies
Answer Match 39.9%

Hello. I bought a used computer a few months back (app. 7-8 mos. ago), but was not hooked up to the internet until 3 weeks ago or so. I got Aol dial-up & unsuccessfully tried to download their anti-virus program, but due to an earlier installation of Norton, some files were still on hard drive, & AOL would not proceed until they were found & deleted. So the bottom line was I was so thrilled to be back on the internet that I didn't push the anti-virus program issue. My fault totally, but when I finally did run a Pc-cillin scan, I was completely shocked at the NUMBER of viruses- I was only through 1/3 of my files & it was reading 7,000 +. However, as I looked at the files being scanned I realized that I did not recognize any of them & the virus which was pre-dominant, Worm GAO, was probably on the computer when I bought it, propagating away. Anyway, I realize the hard drive is toast, but are any of the files salvageable? Could I use Pc-cillin to scan individual files & save them to CD or do I still run risks of re-infecting a new hard drive?Also, I uploaded photos to Yahoo, so if people were to download them to their computers, will they contain viruses? How about saved e-mail? And yes, I definitely learned my lesson the hard way!!! Thanks to anyone, for advice. I have Windows XP Professional. System Manufacturer VIA Technologies, Model VT82C597. AMD-K6 (tm) 3D Processor, MMX, 3D now, 500 mhz . Thank you.
 

A:Over 7,000 Viruses & Still Counting!!!!

12 more replies
Answer Match 39.9%

Well, I've done everything I know, including your suggestions before making HijackThis log. Still getting advert popup from everything from insurance to dating. Here is my HJT log.
Thanks in advance - T
PS - if I post something wrong, please don't yell at me too much. It's my 1st time!

A:Counting on you guys!

Logfile of HijackThis v1.99.1
Scan saved at 12:10:23 PM, on 10/26/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\ISafe.exe
C:\Program Files\ewido anti-spyware 4.0\guard.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\The Cleaner\tcm.exe
C:\Program Files\The Cleaner\tca.exe
C:\Program Files\Java\jre1.5.0_06\bin\jusched.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\CA\eTrust EZ Armor\eTrust Anti-Spam\QSP-2.1.215.5\QOELoader.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVRID.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVTray.exe
C:\Program Files\Weather Pulse\weatherpulse.exe
C:\Program Files\Internet Explorer\iexplore.exe
c:\progra~1\intern~1\iexplore.exe
C:\Program Files\FireTrust\MailWasher Pro\MailWasher.exe
C:\Program Files\SpywareGuard\sgmain.exe
C:\Program Files\SpywareGuard\sgbhp.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.foxnews.com/
R0 - HKCU\Softwar... Read more

3 more replies
Answer Match 39.9%

I have been messing with viruses and infections for 2 days and it seems like I'm spinning in mud. I have another thread:

http://forums.techguy.org/t250735.html

I have scanned with Ad-Aware 3 times and keep finding New Objects. I have HJT and posted it below. Before I started any of these procedures, I couldn't even get to the internet with being redirected, AKA Hijacked. I have since been able to at least close some windows and be able to do enough surfing to get to this forum and download some software. The problem I face now is that when I do start surfing around I get Hijacked by www.81.9.3.87/go/"whatever advertisement goes here".htm

Here are system specs:

345 MHz AMD-K6 3D processor
192 MB Ram
30 GB HD
XP PRO NTFS File System

Foloowing is the newest HJT logfile:

Logfile of HijackThis v1.98.0
Scan saved at 3:45:56 PM, on 7/16/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\atievxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\winlogon.exe
C:\mssys.exe
C:\mssys.exe
C:\WINDOWS\sachost.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\MA311 PCI Adapter Configuration Utility\wlanutil.exe
C:\WINDOWS\System32\Zso5Vyh.exe
C:\WINDOWS\System32\Lh... Read more

A:2 Days and Counting ... Need Help!

16 more replies
Answer Match 39.9%

Hello All:

All I want to do is create an Audio CD from some .mp3 files I have.
(15 .mp3 files = 55.9MB)

I have tried ImgBurn, Ashampoo Burning Studio, and BurnAware.

I have tried changing the write speeds to the lowest settings.

It all seems to go well until the end of the burn when every program tells me the Write Failed. That's it- and I don't know why.

I have an IDE Plextor DVD/RW (PX-870A ATA) drive.

Any ideas about settings? Or anything else I should be checking?

TIA!

A:4 Frisbees and Counting...

  
Quote: Originally Posted by rap33042


Hello All:

All I want to do is create an Audio CD from some .mp3 files I have.
(15 .mp3 files = 55.9MB)

I have tried ImgBurn, Ashampoo Burning Studio, and BurnAware.

I have tried changing the write speeds to the lowest settings.

It all seems to go well until the end of the burn when every program tells me the Write Failed. That's it- and I don't know why.

I have an IDE Plextor DVD/RW (PX-870A ATA) drive.

Any ideas about settings? Or anything else I should be checking?

TIA!


How long are those mp3 files, not in bytes but in minutes?

Things ro consider... when buring a standard audio CD, the mp3 files must first be converted wav files, the burning programs do this automatically.. at least most of them do. If the mp3s are encoded at a high bit rate the wav files could be quite large... is it possible you're exceeding the size limit for the CD?

The other thing to remember.. although it shouldn't affect the burn, use "Disk At Once".

Ap

9 more replies
Answer Match 39.9%

I've got to implement a function that will return the value of bit n of a binary number. I then have to implement a function that will change bit n to 1 or return a 0 if it is out of range.

I'm a bit stuck on this one, anyone know how I'd do it?
 

A:C++ Bit Counting Problem

C++ bitwise operators tutorial

To get what you want you should read up on bit masks and the bitwise and operator. The basic idea is to mask out the bits that you dont want by using a bitwise and operator. I can post example code if you like.
 

3 more replies
Answer Match 39.9%

To put it in a nutshell, I downloaded a game, tried to open it, however it never did. Now accessing my processes list... I have over 500 processes running, and counting. All under the name of the game. My laptop doesn't appear to be running noticeably slower, however these 500 processes are going to mess my computer up sooner or later..

I scanned the executable file with MalwareBytes, Kaspersky (my background AV) and Microsoft Defender. It was clean. Kaspersky however, noted that the program was potential dangerous, only because the digital signature was missing. I told Kaspersky to 'Limit' execution - only to stop dangerous actions.

I then continued to watch my process list grow up to 1000, running under my username. Then eventually, the physical memory overloaded and my computer crashed.

Several days later the same thing occurred. However this time, with a different game. I scanned it, and it was clean. I told Kapsersky to once again, limit execution with no digital signature. Within seconds of opening the game, I had over 200 processes, and the number was slowly rising. I had to hit 'End Process Tree' in order to stop my computer from crashing again.

One person suggested that it had to do with Kaspersky... As other games have worked in the past without limiting them.

I know it isn't a virus or anything malicious, perhaps a glitch? And how can I prevent it?

Additional Info:
Windows 7
AV: Kaspersky Pure

Thanks in advance.

A:500 Processes And Counting?

Try Googling the names of some of these processes. Perhaps that will help you figure out what's causing them or if they're malicious.

2 more replies
Answer Match 39.9%

DON"T MISS OUT ON THIS OPPORTUNITY!!



Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

More replies
Answer Match 39.9%

DON"T MISS OUT ON THIS OPPORTUNITY!!



Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

More replies
Answer Match 39.9%

hey everyone

i'm posting this for a friend whos computer was working fine then out of nowhere it's been getting a msg

smss.exe has encountered a problem

this system is shutting down please save all files and log off\
and it says something about a windows NT/admin

then a bunch of other stuff that he can't make out fast enough

then after 60 seconds the computer reboots
he's running windows XP pro sp1
512mb of ram (no specific brands)
800mhz untel cpu
40gb maxtor harddrive

sorry about being so vague he's trying to tell me by memory since hes not at the computer itself for the night and we can't just reformat because there is important university essasys/reports/lectures that he can not get again

~Allen
 

A:counting down then restarting out of nowhere

9 more replies
Answer Match 39.48%

I have a problem with my Word documents. When I try to print them, the right edge is cut off. I thought it was my computer or my printer, so I took it to another computer, and the same thing happened.

The problem is in the files themselves. How do I change the files so they function as they used to? This has been the case with more than 20 files, which were made at different times.

My computer used to warn that the form I was using was too wide, and ask did I want to go ahead. I would select yes, it would print, and would look just fine. Now it does not ask that question.

Incidentally, another problem is that my files no longer end with .doc, but now say .rtf. All of my Word files changed in several ways at once.
 

A:Word Trimming Right Edge when Printed

11 more replies
Answer Match 39.48%

Gentlemen/Ladies,I?m not sure where to post this question so I?m plumping for this forum, knowing that it will be redirected if it is in the wrong place.Occasionally, when I open a website, its pages are too wide for my monitor and I have to scroll across to the right to see what is hidden from view. When I go to print the pages, I end up with just threequarters of the width of the script.I am using an HP LaserJet 1010 printer.I do not have this problem with all websites. Today, the offender is - http://www.explorenorth.com/whalers/featur...lecaptains1.htmWill the pages of this website be partly displayed on the monitors of all of the people who open it , or are my own ?settings? to blame. Please, how can I overcome the problem ?Yours sincerely, oldsoldier

A:Lack of printed script width

Hi oldsoldier.I get the same thing when viewing that page. My screen resolution is set to 1024X768. I found that if I went to View>Text Size and set it to Smallest the page almost fit. Have you used Print Preview in the File menu to see what the page will print like? You can also use Page Setup in the File menu to adjust the margins etc. before printing.

3 more replies
Answer Match 39.48%

How.
This question may look stupid.But please help me
Is there any way to save the documents or material from internet which to be printer
As i have no printer at home,I have to take that to my friend's house,where we can print.That pc has no internet
So i want to save douments offline and then print later using a pendrive
Windows document viewer is one kind of programme,that useful
Is there any other ways?
Please help me
Thanks in advance
 

A:How to save douments from internet which are to be printed later

6 more replies
Answer Match 39.48%

I'm trying to print images/pictures using windows photo viewer and I get this error "Your pictures can't be printed because this error occurred".... It doesn't tell me which error.. simply just says that in the dialog box. THe dialog box comes out like 4 times with the same message and I have to click OK.

I've already tried googling it and the only fix I can find is replacing photowiz and I already did but it has fixed. I've also installed Photo Gallery and it stil lgives me the same error when I try to print and picture. I've also reinstalled all my printer drivers...
Windows 8.1 Updates installed . HP Computer

A:Your pictures can't be printed because this error occurred

What is the mfg & model of the printer? How is it connected to the computer?

8 more replies
Answer Match 39.48%

I have an Access report that includes a sub-report in whihc I would like to print the records on one row, rather than one column. So far, I have been unable to find a solution.

Example Record:

Job Number: 123456
Version(s): 001,002,003,004
 

A:Access Sub-report records printed on one row

7 more replies
Answer Match 39.48%

Problem: Green Cast on Images being printed
Editor - Elements Version 7 & Windows default viewer
Printer R285
Colour Management:- every variation tried

My Neighbour has a Epsom R285 http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-Photo-R285 printer, his had it a few years.
I have recently changed his PC to a Windows 7 desktop and installed all the drivers. The Printer worked fine, but yesterday he was getting a green colour cast on all images
I checked the head alignment, nozzle set-up and cleaned the heads
Checked with windows default viewer, and printing from that application - same problem
Checked all the Colour Management, ICC, settings etc - tried without Management, sRGB, adobe 1998 etc, checked colour management on printer and elements

The image looks fine on the screen , I have emailed a sample image and on my setup it prints fine

The next step was to try the printer on my laptop
any other ideas - this is usually a colour management issue and i have fixed quite quickly in the past on other systems - so I suspect I'm missing something obvious now
 

A:Green cast Images being printed

Wild guess .. Windows 7 software update for the printer ??
 

3 more replies
Answer Match 39.48%

Hi

I suspect this might be a fairly common problem. Whenever I print there also seems to be a block of about 5 fine lines printed over the text for about ever new line of text. Now I recently bought a new (high capacity) cartridge which costs a fortune, so I'm not too keen to buy another if it is the printer (about 6 years old) which is the problem.

Has anyone else had the same sort of problem?
 

A:Solved: Lines through printed page

Try cleaning the print heads, this is the normal solution to this problem.
 

2 more replies
Answer Match 39.48%

I have an HP Deskjet 920c that has worked fine until a few days ago. I tell it to print and the goes through the motions but nothing comes out. This means the printer icon is appears and says that it is printing but it does not. I have checked the power cords and the made sure that it is connected to the computer correctly. Any ideas?
 

A:HP Deskjet 920c says it printed but it didn't

13 more replies
Answer Match 39.48%

I've spent the last four hours trying to solve this/use info that's similar to my problem to no avail. I feel I'm so close I can smell the answer is near!

I have a form I use for work that I manually have to fill in 50 times a day with mostly the same information. This is definitely a job for a computer!

Ideally, I would like to open the spreadsheet and have a button that says 'Print' and it will print what I need - 50 forms with the right information.

So far I have done the following:

Created a custom page size (16cm x 14.7cm)
Scanned an original to use as a background so I can line up the information
Adjusted the Excel boxes to print the info in the right place.

Now I need to print the following number ranges as identifiers:

1 - 22, 29-42 and 51-54

I feel I'm close with using this macro:

Private Sub Workbook_BeforePrint(Cancel As Boolean)
[copy] = [copy] + 1
End Sub

I use both Excel 2003 and 2007, depending on where I am!

I have NO experience of macros until today, so any advice is very welcome.

Regardsm

Jeff.
 

More replies
Answer Match 39.48%

I have printed photos from e-mails before, but never had a problem with moire patterns. This time I have a fine vertical line pattern that is not clearly seen unless you have glasses on that magnify them. Unfortunately, I wear glasses that bring them out. What can I do to prevent or get rid of the moire? Any ideas? Thanks, lilart
 

A:Moire from printed e-mail photos

It likely just a matter of the resolution of the email derived image vs the resolution of the printer. Does it happen with every image or just the lower resolution ones from the emails?
 

2 more replies
Answer Match 39.48%

Using HP J4680 printer. Some of the pages I print size I print from web pages are so small it is hard to read the printed pages.

Is there a way to change the printed text size?

If so how?

Thanks

Gary
 

More replies
Answer Match 39.48%

I have had my problem for some time and had a work around which is no longer applicable hence I get a white screen where message should be so I don't know what is being said.

My problem started about 6 or 8 months ago on Outlook Express. At that time I was using dial up and changed over to Earthlink.net with their e mail program Total Access. My problem immediately disappeared. One month ago I switched over to High Speed and the person doing the custom install saw I used Outlook Express so he reenergized (non computer word) the program. The custom installer saw my INBOX with about 30+ messages that go back a long way. EACH ONE LINE description was complete, meaning To: xxx,
From: YYY, Subject: ZZZ, and anything else that showns on the ONE LINE.

When I double click on one of the inbox messages I FIND MY PROBLEM! Everything that showed before is shown again, but now greyed out since it has to do with basics. HOWEVER, the text area (where the message should be) is 100% pure white. I have double clicked all 30+ messages and get the same thing,...a pure white screen.

I thought it might have something to do with installing SP-2 on my XP Home Edition BUT SP-2 was installed about 6 months ago and my e mail problem started about 8 months ago.
That is my problem! Can anyone offer suggestions?
 

A:No Outlook Express Messages Are Printed

Hi George-2

Welcome to Tech Support Guy Forums!

So if I understand correctly, you can send and receive emails ok.

The problem lies in that the messages you receive are blank inside?

If you run your mouse over the inside of the message, does anything show up in the highlighted/selected area?

Perhaps your fonts have a white color?

Are you able to create a new message and see the fonts inside?

Let us know.
 

1 more replies
Answer Match 39.48%

I'm running Windows 8.1 64 bit. I have a PNG file that exceeds the size of the page, 8.5 x 11, when printed. When I view the picture online it appears that it should fit the paper okay. I resized the file by %, pixels, and measurements (inches). I also changed the paper size to 8 x 10. Can somebody tell me what I am doing wrong.

Thanks
PapaK

A:Can not resize PNG file to fit paper when printed

Open a Word document of the desired size and import it there. You can also draw a box on the Word document and put it into there - it will fit. If you don't have Word, try Paint.

3 more replies
Answer Match 39.48%

Fill color isn't displayed during normal viewing of a worksheet. When the worksheet is printed or print-previewed, the colors are visible.

Re-installed Excel, problem persists.
 

A:Excel XP - Can't see fill colors until printed

Go to your control panel and double click on Accessibility Options.
Click on the Display tabsheet and uncheck "Use High Contrast" then press OK to close that window. You should now be able to see color in your view mode.
 

2 more replies
Answer Match 39.48%

When i try to print something the documents appear in my print queue then are deleted before they even begin to print, my printer was working fine until yesterday and now this

Please help

Steve
 

A:Printer deletes documents before they are printed

G'day steviejay, sounds like you have an intelligent printer that is censoring your output!
That is a worry, I haven't seen that problem previously.
You might try having a look in your control panel, system, devices or device manager, with a bit of luck when you scroll down through all your devices you will find a USB printer, (assuming yours is usb) if you open that item you should see something like "this devise is working properly" which is a good start for troubleshooting.
There should be no yellow exclamation marks on this item.
Are you quite sure your print queue in the print manager is being actually deleted?
What kind of printer is it?
The assumption is that it is a PC using a windows variant.
Cheers, qldit.
 

1 more replies
Answer Match 39.48%

I doubt that I can post this question here but I assume it'll be removed if not.

I have an HP printer, 2540, wireless printer. Works fine.

I started to print a pdf file. Because it was a large file I choose the 'booklet' option, which prints 4 pages on one side, then, when everything of the even numbers (I think, not sure) has printed, you will get a message on the pc telling you how to replace the already printed pages in the printer so it can print on the backsides.

When I saw the first batch I decided I didn't like it. So when the message with instructions on how to replace the already printed paper, I went in the printer's menu, highlighted the name of the document and did 'cancel'. In this printer menu it now said it was 'deleting' the document. But it didn't. I waited about half an hour. I turned the printer off and back on. I closed the document. But still the printer menu said 'deleting'.

I opened the document up again, changed the settings for the printer (as in one sided, normal size) and accidentally hit 'print'. I then noticed that - in the printer menu - the 'new' document showed up above the one that still said it was deleting. But it still didn't print. I went in the print menu again and highlighted the new document and did 'cancel' and it did cancel it.

But the old document is still sitting there, 'deleting'. I can not get past that. Any suggestions wo... Read more

A:Cannot delete partly printed document from cue

There's a way to force these to delete, if you don't mind a little typing. You need to open a command prompt by running cmd.exe. If you're unsure of how to do that, tell me which operating system you're using and I can walk you through that. This should open up a black window, and you need to type in the following commands sequentially, hitting the Enter key after each command.
net stop spooler
del %systemroot%\system32\spool\printers\* /q /f /s

net start spooler
The first command stops the printing service, allowing you to carry out the second command, which deletes any jobs in the queue. The last command re-starts the printing service, and you can try running a test print. Once that's all done, you can just close the black window.
 

8 more replies
Answer Match 39.48%

I bought a parallel to usb printer cable to make my HP Laserjet 4L to work on my Vista dell laptop and it worked. Then I upgraded to Win 7 64 bit. Now it won't work. It sees it, installs fine, just won't print. no errors. Can it be a "cable driver" (never heard of such a thing until I started researching this problem) if it worked with Vista? It's a no-name cable, so won't likely have a driver that I can find.

Is there anything I can do but replace the cable?
 

A:HP Laserjet 4L printed with Vista, not with Win7

7 more replies
Answer Match 39.48%

I am so hoping someone knows the answer to this very perplexing problem... I thought it was my printer so I bought a new one and I have the same problem. I print a picture of my granddaughter, who has these wonderful chubby cheeks.........until it is printed and the chubby cheeks are gone. She has slimmed right down...... lol I have been struggling with this problem for quite a while now, have asked everyone who comes within two feet of me and no ones knows how to fix this or what is even causing it. I know someone here will know. I have never had a problem that this site has not been able to fix for me. : ) Thanks, in advance.

Oh yes, and new printer is an Epson 835 al-in-one and my old one is an HP photosmart 2575
 

A:Solved: quality of printed pictures...

16 more replies
Answer Match 39.48%

Anything I print off the web or email says "Network + Job Functions" at the top of the page and the date at the bottom. Sure, I've been to websites pertaining to the job functions but I never saved anything with that name. How can it be printing at the top of any page?
If I print a document that I made and saved from Wordpad, not anything from the net, it prints fine with no header. I looked at the printer settings dialog box and it shows nothing with this title.
Thanks, Jim
 

A:Printed documents show same heading

If you are using IE, at the top of the page click on file and page setup and see what you have under header and footer. You probably need to change those.
 

1 more replies
Answer Match 39.48%

I have an Access database used on daily basis to print maintenance work order. Each work order is assigned with an auto field No. I have a commend button assigned to print each record in a report format. On clicking command button, i enter the record number to be printed and it previews the report and check for accuracy of data entered. Once checked, i click on the print icon to print the same.

My question is, is there any method to find out the record i am going to print now is already printed before? A kind of record keeping of the printed records. Also, the same method shall help me to find out how many times each record is printed?

Hope someone can help me
 

A:Record keeping of the printed records

8 more replies
Answer Match 39.48%

Can't find app that lets me get photos printed & delivered to me for Lumia 640XL

More replies
Answer Match 39.48%

computer freezes, especially when going to facebook.com. I am getting pop-up ads. everything I print on my Brother MFC-440cn printer comes up with a watermark from "Spectrum Glass" When trying to download from your instructions for DDS I get a blank page and no download. I have included info that I thought may be useful.
 

A:lock-ups, pop-ups, and watermarks on printed material

Run the following:

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

Thanks,

Kevin....
 

1 more replies
Answer Match 39.48%

I can't see the printed material that I send or what comes to me.

More replies
Answer Match 39.48%

Sir,
Thank u for ur support on my previous issue. I have an another issue, whenever I give print from an adobe reader file it shows the error message "Document could not be printed" . I have HP LaserJet printer model F2180. Kindly help on this issue.
 

A:adobe reader files could not be printed

If your problem is that Adobe Reader is unable to print, but other applications can print, I suggest that you uninstall Adobe Reader and then download and install it again.
 

1 more replies
Answer Match 39.48%

Hey, I have a person here that has the problem that drawings that she has in her documents don´t print out. I´ve tried turning off background printing still same, I´ve tried printing it on my printer and that works.

Anyone have any idea on any settings or something I can change to make it work?
 

A:Images not being printed in Word 2002

Drawing objects (Tools - Options - Print) ticked?
 

2 more replies
Answer Match 39.48%

Hi again

This time I've encountered another problem with dates. Below are a series of dates in one column formatted mmm-yy. I have many of these dates ranging from Jan-05 to Dec-05 and a few in Jan-06. I want to have a count of how many Jan-05 I have, how may Feb-05 I have etc. I want a number count. for example I have 2 May-05 and 8 Sep-05. The countif formula does not work since it requires the full date, i.e. May 12, 2005 etc. But then it only gives me 1 count only, since the other May-05 has a different date. All I want is to count the months only. Any idea how to do this?? Do you have to write a macro to accomplish this task??

Mario
May-05
May-05
Jun-05
Jun-05
Jul-05
Jul-05
Aug-05
Aug-05
Sep-05
Sep-05
Sep-05
Sep-05
Sep-05
Sep-05
Sep-05
Sep-05
 

A:Counting Months only in Excel

11 more replies
Answer Match 39.48%

I've downloaded one, but I wanted to know what's the best app out there. The store itself is not of much help.

More replies
Answer Match 39.48%

Counting the number of particular process,

I couldn?t figure out if there is a way to count the number of particular process. For example, in the attached screenshot, the number of ?ArcSoc.exe? is three.

Is there a way to count them automatically?

Thank you

Best

Jamal

A:Counting the number of particular process,

You could click on the name column to sort processes by ascending/descending order. From the looks of things, your system is set up to sort based on disk activity right now.

7 more replies
Answer Match 39.48%

Hello,

I recently put a workstation together and am expeirencing the memory counter checking/testing/counting the memory 5 or more times. Sometimes its only three, tonight it was five or six...

The board is an MSI 6368 ver2.1

The BIOS is Award Modular W6368MS Ver 3.1 051501 Pentium 3 1000 Mhz 133 x 7.5 512mb of pc133 generic memory [IBM]

The power supply is 250 watt, and is running Windows Advanced Server, why? I dont know... practise ... lol.. anyways...

It gives me the option "esc" to skip memory test then boot.

I would like to know how to set this counter so it is not counting the memory more than once at boot up.

Thank You

Eli
 

A:keeps counting memory at boot-up

Enable "Quick power on self test" in BIOS
 

3 more replies
Answer Match 39.48%

Hi,

When we right click on any folder or drive, and then see Properties, Windows shows count of files and folders. My question is that what technique Windows uses to count files and folders? Does it uses FindFirstFile() and FindNextFile() API or some other techniques? My doubt is because my program shows count slower than Windows. Anyone please clear my doubt.

Thanks and Regards,
Abhay

A:Counting Files and Folders

Originally Posted by Abhay Kumar


Hi,

When we right click on any folder or drive, and then see Properties, Windows shows count of files and folders. My question is that what technique Windows uses to count files and folders? Does it uses FindFirstFile() and FindNextFile() API or some other techniques? My doubt is because my program shows count slower than Windows. Anyone please clear my doubt.

Thanks and Regards,
Abhay



Sardinian Guy posted a prior topic on this and found out how to count files using powershell. Here is a link to that topic so you can check and see if his information answers your question. Good luck!

2 more replies
Answer Match 39.48%

Brand new system with Asus A7N8X-X mobo, AMD Athlon processor.

The first hard drive was a western digital. It immediately started making loud clicking noises when I powered it up.

I returned it and bought a Maxtor diamond Max 80GB drive. This one allowed me to install windows, etc, and then started making clicking noises and locking up. Powermax reported that the drive was failing.

Returned it and got an identical Maxtor drive. Everything worked perfectly for a few days. Since I actually got the pc to boot, and some software installed, I discovered that the system was very unstable. A memory test revealed that the memory stick was bad. After replacing it, all was well.

I sent the computer home with its rightful owner, and he called me almost immediately. As soon as he powered it on, the hard drive started making loud clicking noises and locked up. Powermax revealed that the drive was failing.

How likely is it that this computer destroys three hard drives? Is there any possibility that the mobo or power supply is frying these drives? I've been carefully watching heat, and it seems withing tolerable ranges. HD is about 100 degrees, CPU around 115 degrees. The case has two big fans on it, and the cpu has another.

Am I doing something wrong?
 

A:Three hard drives down and counting

Check and/or replace the HD data and power cables. I once killed a floppy drive because the power cable was assembled wrong and 12V went to the 5V pin..

Check the PSU voltage levels too.
 

5 more replies
Answer Match 39.48%

I have a few cells i need counting in excel but i need them to perform a certain job. I need to count 2 cells that have data in them to total 1. If there are blanks in the cells i need it not to count them. Below is an example.

Cell L2 Blank Cell M2 blank Cell O2 29 Cell P2 25.

I need this total to total 1 for the 2 full cells of O2 and P2.

Then after that any 2 cells together ie R2 and S2 adds 1 to the total providing that both cells are full.

to explain beter I'm doing a darts spredsheet keeping totals so i need 2 full cells to total a game win of 1. Then every 2 cells full after will be game win 2,3,4 etc.

I hope someone can help.

Many thanks
 

A:cell counting in excel

It's better if you post a sample spreadsheet, showing where the totals (1s) need to go.
If you click on "Go Advanced" below the Quick Reply window you can upload a file.
 

1 more replies
Answer Match 39.48%

Hey there,

I keep getting BSOD's on my Machine. They vary from most being System service exceptions, to IRQL not less or equal, and a couple more that I cannot remember. My event log has recorded 18 thus far, but I've had more - before I installed Windows 7 x64 from XP-64bit.

They are all event ID 41...I'm assuming that's generic and all from the same issue?
I'm using:

Windows 7 x64 (BSODs also happend before I had w7 installed.)
i7 @ 2.6
P6T mobo
gtx260 gpu
6GB G.Skill ram.

Nothing's overclocked, everything is stock.
I've ran memtest and it came back clean - I did 1 pass...but I figure that's fine. I'm certain I've installed up to date drivers for my gtx260, etc. Is there anything that can solve these issues? I believe I've flashed my BIOS with the new firmware as well....
Help!

A:18 BSOD's and counting. win7 x64.

I've attached the .dmp files into a folder. From what I've read, this might help you all.....

Thanks.

9 more replies
Answer Match 39.48%

Hi all,

This summer I designed an Access 2003 database that tracked volunteers for an organization.

They've asked if they could create a report that provides a list of how many volunteers they had in a given period. They only want to count the person no matter how many sessions they've volunteered during the time period.

I've thought about grouping by Unique_ID and then counting the groups, but that leaves me with the question of what to display on the report. Also, I'd like to be able to display the inputted date range (obtained from the query) on the report, if possible.

any ideas on how to accomplish this?

Thanks!
Elizabeth
 

A:Report Counting Volunteers

11 more replies
Answer Match 39.48%

This is multi-part question on how to create different formulas on the attached worksheet.

#1 - I would like to count the number of Start Dates IF the Start Date is blank or greater than today, but only IF there is a date in the Requisition Date column. This would be to indicate the total number of open positions as of today.

#2 - I would like to count the number of cells in column A that are greater than or equal to 17 IF the Start Date is blank or greater than today, but only IF there is a date in the Requisition Date column. This would indicate total number of open positions that have a grade lever of 17 or above.
 

A:Excel-Counting with dates

7 more replies
Answer Match 39.48%

I have xp pro
And you know that sometimes you may suddenly get that blue screen that has a counting at the bottom which counts to 100 and at the end it restarts?

What causes that?

I can't explain it anymore sorry but some of you should know what i mean
 

A:You know that blue screen with the counting?

7 more replies
Answer Match 39.48%

Hello, Is there a formula that counts rows. What I'm trying to do is count the number of rows that I highlight to see if I'm missing anything. After I check, I would delete this formula. It would be easier than trying to subtract cell numbers or count I,2,3.

Thanks, Mike
 

A:Solved: Counting Rows

8 more replies
Answer Match 39.48%

I have what I hope is a simple issue in Access. I have a simple set of results of targeted email campaigns. I have a Access report grouped by Salesperson and within that group, each email recipient is listed with an indication of whether or not that person opened our email. Such as:
Smith, George Opened
Smith, John Opened
Smith, Sarah Not Opened.

I am looking for the proper function/syntax to count the total number of "Opened" messages in each group. I've tried a DCount function, but haven't gotten it to work. I know I can work with a count in a query, but I'm interested to see if I can do this right in the report and learn something new regarding functions.
Thanks!
 

A:Conditional Counting in Access

6 more replies
Answer Match 39.48%

Hi,

the last time i posted i had 53 running processes. a little excessive dont ya think? anyway my post went unanswered. i saw the lack of HJT log and tried to amend the post.

prior to that i was working with someone ref my desktop and they musta gave up becuase never heard from them again ( 3 mos ago)

anyway here is my current HJT log
glenn

A:56 running process and counting- help

Logfile of HijackThis v1.99.1
Scan saved at 8:51:41 PM, on 3/11/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Common Files\Creative Labs Shared\Service\CreativeLicensing.exe
C:\WINDOWS\system32\CTsvcCDA.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\TRENDM~1\INTERN~1\PcCtlCom.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\Tmntsrv.exe
C:\PROGRA~1\TRENDM~1\INTERN~1\tmproxy.exe
C:\WINDOWS\wanmpsvc.exe
C:\Program Files\Pure Networks\Network Magic\nmsrvc.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\stsystra.exe
C:\Program Files\Trend Micro\Internet Security 12\pccguide.exe
C:\WINDOWS\system32\Rundll32.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\system32\dla\tfswctrl.exe
C:\Program Files\Creative\SBAudigy\Surround Mixer\CTSysVol.exe
C:\WINDOWS\system32\WLTRAY.exe
C:\Program ... Read more

4 more replies
Answer Match 39.48%

In wordperfect 10 how do I get document information, number of words in a document, etc.
 

More replies
Answer Match 39.48%

Hi again

Once again, I would like to thank all of you for your help in Excel programming. You guys are GREAT!!

I have another slight problem I need help with. I have a column, say column A, with text. Most of this text is repetitive in nature. I want to keep only the first 10 rows of the text that is repetitive and cut and paste the other repetitive text to sheet 2. Here is an example: Let us say that Column A has this text. I just used any text. The columns could have repetitive numbers as well. This is just an example.

qwe
qwe
qwe
qwe
qwe
qwe
qwe
qwe
qwe
qwe
qwe
qwe
rty
rty
rty
rty
uio
uio
uio
uio
uio
uio
uio
uio
uio
uio
uio
uio
uio
uio

Etc down the column. This list is extremely long. As you can see form my example, there are 12 qwe's, 4 rty's and 13 uio's. I would like to keep only ten or less of each groupings and cut and paste those groupings in excess of 10 into sheet 2. In other words, when the macro is run, I would like to have 10 qwe's, 4 rty's and 10 uio's in sheet 1. Sheet 2 would then have 2 qwe's and 3 uio's.

I have tried to create a macro by myself but this is beyond my prgramming expertise. Any help woud be appreciated.

Mario
 

A:Counting rows in Excel

16 more replies
Answer Match 39.48%

Morning,

I am trying to do a count of the amount of approved and released items from each department.

I have an excel sheet like the attached which I have 3 different departments

Finance
Sales
Stationery

I have a collumn each for approved and released. The sheet itself will be updated manually each day when a department appoves an item which has previously been released.

What I am trying to do is keep a record of what we have outstanding and released relating to each department.

Please see attached sheet

Any help would be greatly appreciated
 

A:Solved: Counting from 2 different Collumns

formula like
=SUMIF($A$2:$A$12,A20,$B$2:$B$12) should work on the example you posted
see attached , i have completed for all

not sure of the fill colours - you could use conditional format to automate the colours
 

3 more replies
Answer Match 39.48%

The company that I work for is "going green" and individual employees would like to know how many pages they print on a daily, weekly, and monthly basis.

These employees all print to a networked printer, but instead of getting a cumulative count of how many pages a department prints, each employee wants to know how many pages he/she prints.
Has anyone ever had to configure something like this?

A:Counting Print Jobs

I have seen this. But it is not computer related. It was part of the printer. Each user has to enter their personal code in order to print pages, and then the printer keeps track of the numbers.

2 more replies
Answer Match 39.48%

I have a need to count the number of employees that are assigned to an associate director. I have them identified in the Employee Info Table as Associate Director ID = 24 and 9. On a form called frmDirectors Report Date, I have a choice to pick which Director, then the printer function calls the report and subsequent query to limit the data. One calculation on the report need to know how many employees in total are assigned to the selected director in a calc that figures average employee hours. I cannot figure out how to add the count to the existing query or any other way of approaching this issue. HELP. I have included the MDB for reference.
 

A:Counting Records In Access

I have already answered this question on your previous thread.
 

1 more replies
Answer Match 39.48%

i have an access file that has two tables. one table lists all the foremen and the other has the inspections. i want to print a report that shows how many inspections each foreman has. some foremen will not have any inspections. the two tables are linked together already.
 

A:counting records in access

If the inspection table has the field references the foreman, then use the following select statement.
select foreman,count(foreman) from inspection table group by foreman
Regards/Agoo
 

1 more replies
Answer Match 39.48%

does anyone know of a formula to count how many numbers there are in a single cell?? For instance, Cell A1 has "32, 567, 47, 3563" I need a formula to count that there are 4 numbers there. Is this possible???
 

A:Excel Formula::Counting

8 more replies