Tech Problem Aggregator

Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

Q: Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?

A: Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.

1 more replies
Answer Match 107.94%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 96.18%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 90.3%

Hey, I used the thread search here and found out how to remove the peper trojan my dad had on his computer, along with HSA.

The spyware has been removed, the computer is running splendidly. However, entries still remain in the "Add/Remove Programs" Control Panel. They all seem to be related to HSA, because like the entry for HSA, all they really do is open your browser and go to a page where it says you can download an uninstall program.

Does anyone know how to remove these entries from the "Add/Remove Programs" screen?

EDIT: nevermind, found out how to do so here
 

More replies
Answer Match 88.62%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 88.62%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originall... Read more

A:"Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 88.62%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 88.62%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A:"Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.
 

A:Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 88.62%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer
 

A:Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.
 

3 more replies
Answer Match 88.62%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 88.62%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 88.62%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 88.62%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does "Compress Contents To Save Disk Space" do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.62%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 88.2%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 88.2%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 88.2%

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A:[SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space o... Read more

4 more replies
Answer Match 88.2%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 88.2%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 87.78%

As this question was never answered I'll post it verbatim with my own comments below,
See original post here;
http://forums.techguy.org/windows-vista/756093-flash-drive-s-active-light.html

In all operating systems up to Vista, the flash drive's "active" light turns off when I go through the disconnect procedure; but, in Vista, it doesn't. I have traditionally used this as part of my explanation to others (and a convenience to myself) about when to not to remove the flash drive from its USB port.

This is a problem common to all Vista systems I've seen.

Why does the light not turn off in Vista?

And, is there an easy way to correct this?

Additional information: I have eliminated this problem being hardware-related. I have loaded Vista onto one of my systems here that previously had Windows 2000, then XP on it and it was only with the loading of Vista that the problem developed on this system. Just to be absolutely sure, I did a restore of a previous image of Windows 2000 and the problem went away again. I put Vista back on and the problem came back. So, this is strictly a Vista problem.Click to expand...

I have had the same problem with every Vista system I have used and every flash drive (note this means SSD NAND flash not HDD's or card adapters). AS the last discussion degraded into useless questions about hardware and other OS's let's get a confirmation that someone out there actually has a flash drive that turns its activ... Read more

A:Flash drive's "active" light doesn't turn off in Vista when "safely removed"

have done a litte research and testing in my lab on several machines and have confirmd the problem. What it seems to indicate to me is that, in Vista, the light simply indicates power, not data transfer. Whenever I am transferring data, the light blinks.

While I have never actually tested it, I do not belive that the "safely remove" feature actually kills all power to the USB port in XP. If that is the case, then there is really no danger as long as vista has acknowledged the disconnect and knows not to try to write data to the drive.
 

2 more replies
Answer Match 87.36%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 87.36%

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A:New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 87.36%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 87.36%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 87.36%

whenever i clicked on a large video file in explorer (running xp sp2 on inspiron 6000), explorer would crash. i found a tip online to run "regsvr32 /u shmedia.dll" and that fixed the problem completely.

however, this fix created a new problem - - now all the info that used to be under "artist" or "album" is gone! any fix? "date modified" is still there, but i like to sort my mp3 folders by artist, and now it does me no good.

by the way, when i now click on an mp3's properties, summary tab, and go to advanced, all the artist/album info is missing from there too.

from doing a search, i see that the way to undo the original fix is to run "regsvr32 shmedia.dll", but then i think i will have errors with large avi's.

so, any other fix?
 

A:Solved: "regsvr32 /u shmedia.dll" helped, but removed "artists/album" info

Greetings daverose808

Download the Attached File 'AudioProps.rar'> Unzip it > Right Click on "AudioProps.reg" > Choose "MERGE"
 

3 more replies
Answer Match 86.94%

I just started getting an error message headed "Miscrosoft Genuine Advantage" stating my copy of Office is about to be marked "not authentic." How can I delete the source and cause of this message. Why am I getting this. My computer is 5 years and this has never happened till now.
 

A:How to Remove Error Message: "This copy of MS Office is not Genuine."??

8 more replies
Answer Match 86.52%

My new laptop originally came with a trial for the 2007... I uninstalled that, and have been trying to uninstall the program listed as "activation assistant for the 2007 microsoft office suites" under the Add/Remove Programs option in Vista. However whenever i select the uninstall button I get an error saying "Microsoft Office 2007 must be installed before Microsoft Activation Assistant can be installed."

Anyone had a similar problem with a solution?
 

A:Solved: Remove "activation assistant for the 2007 microsoft office suites"

9 more replies
Answer Match 86.52%

Hi there
sometimes when testing new systems I have to install Office 2010 from scratch (I have a VL enterprise version so activation isn't an issue).

However Windows update then every time prompts for about 1.5GB of updates and fixed.

Does anybody know how to "slipstream" these into my office install disk - or at least store these updates manually so I don't have to keep downloading the same stuff over and over again.

(OK I've fast internet - but it's a pain to do each time).

Cheers
jimbo

A:"Slipstream" Office 2010 install disk with FIXES included

Microsoft Update Catalog






least store these updates manually so I don't have to keep downloading the same stuff over and over again



.

I used this site to save and store the updates for XP in a special folder on my HD.

5 more replies
Answer Match 86.1%

whenever i clicked on a large video file in explorer (running xp sp2 on inspiron 6000), explorer would crash. i found a tip online to run "regsvr32 /u shmedia.dll" and that fixed the problem completely.

however, this fix created a new problem - - now all the info that used to be under "Audio" or "video" is gone! any fix? "date modified" is still there, but i like to sort my video folders by artist, and now it does me no good.

by the way, when i now click on an avi's properties, summary tab, and go to advanced, all the needed info is missing from there too.

from doing a search, i see that the way to undo the original fix is to run "regsvr32 shmedia.dll", but then i think i will have errors with large avi's.

so, any other fix?
 

A:"regsvr32 /u shmedia.dll" helped, but removed "video" info

no one can help me? Pl;ease.
 

1 more replies
Answer Match 86.1%

Hello,

last November I installed and ran the Gov't Malware Program by Amnesty Int. called "Detekt".
It found that my PC was infected, with "Ghost": Unfortunately, this program only finds spyware/malware but does not offer any removal tools. I tried running Avast and CCleaner but they were not able to find anything on my Computer, Detekt would still find "Ghost".

Later in 2014 I installed a new Avira Anti Vir program (instead of Avast whih I used before) plus Malwarebytes Anti Malware. All programs were updated. Neither one of these three programs did find anything at the time (to the end of 2014).
Now today (Jan. 5, 2015) I updated and used Malwarebytes and it found "Babylon.A" (a kind of "Ghost", if I understand right) in the "Unlocker" (1.9.2) program files.It was put into quarantine by MWB.

I will try to do as you describe the process, and first post the log files that MWB put out today. My external Hard Disc Drive was connected during the scans.

Please let me know if my Computer is safe now, and if there are any safety measures to take (like , not using old USB sticks, or the like)

Thank you for your help!

QuestionGhost
 

A:"Detekt" found "Ghost"_ MWB removed Babylon from Unlocker

I do not recall exactly when or why I installed Unlocker (1.9.2), or where I got it from, but I must have downloaded and installed it around Nov 2014 (last run Nov 24, 2014)
 

95 more replies
Answer Match 85.68%

I keep getting "Low disk space" messages about one of my partitions.

First of all, what is the point of this message? I can see why it would be useful for the system drive, but for all other drives why would anyone worry about filling up a drive?

More importantly, how can I disable this message from persistently popping up every day?

A:What are "Low disk space" messages for?

Hello Marty,

It's basically just a warning to let you know that the disk/partition is extremely low on free space. This is to warn you to either clear space or get a bigger storage device soon since you could lose data, possibly everything, on the hard drive if you run out of space on it.

The tutorial below can help show you how to disable the "Low disk space" message. Low Disk Space Warning in Vista
Hope this helps,
Shawn

9 more replies
Answer Match 85.68%

Hi everyone,

I've been having this prblem for several months but recently it has been getting worse. I'm working on an Dell Optiplex gx280 windows xp professional sp2. Here is the problem, while I'm working on my computer (doesn't matter what I'm doing) I will get an error msg "low disk space" flash on my screen, then my monitor will shut off, but the power light on the computer stays on (sometimes flashing). I'd have to power it off and turn it back on and it would log in normally. This morning it happened 3 times, please help. Thank you in advance.

-jdaries-
 

A:"low disk space" error

6 more replies
Answer Match 85.68%

I have a Compaq Presario with Windows XP Home Edition. I keep receiving the above message. How do I get rid of it? Yes, I know it means I don't have enough disk space on my D Drive, but how do I fix it? It won't defragment because it needs more space (I have only 45 mgs.) My D Drive is solely for Restore so I cannot delete files from there. Can I enlarge the D Drive?

Thanks, gb
 

A:"Low Disk Space D Drive"

16 more replies
Answer Match 85.68%

One of my users was working in Corel Word Perfect 9.0 and experience an "out of disk space" error when she tried to save her work (just a small document). She was working over our TCP/IP network using Win2000 terminal server and saving to a Linux file server. I was at the server so I was able to save the file with a different name but I can't figure why she would get that error as there is plenty of space on the Linux server. Has anyone ever seen this before? Thanks
 

A:"out of disk space" error

Just a wild guess but is there possibly a setting somewhere that may limit the amount of storage space a user can use, on a user by user basis? If so, you may just need to increase the setting for that user.
 

2 more replies
Answer Match 85.68%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 85.68%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 84.84%

Please can somebody help with this minor but annoying matter. When turning on my business computer one morning, the space bar and return/enter buttons are visable when i type emails, but when i send them, they are not. I know its a setting, but can anyone tell me what setting and how to turn it off?

Thanks!

A:[SOLVED] "Space bar" and "return/enter" are visual on emails! Help

You need to tell us what email client you use as these days not everyone uses the built-in one.

4 more replies
Answer Match 84.42%

I was building a new array, using drives formatted with larger cluster sizes to get over the 15.8TB drive limit.
Since you can't 'remove' a drive in the GUI and have everything rebalance, I physically removed the drive while powered down.  Upon rebooting, Storage Spaces said there was a missing drive and I clicked "Remove" so that the repair work would
start (plenty of room since I'd just moved 7TB of data to the new array).

Then disaster hit.  One of my 1TB drives failed hours into the Repair process.
It appears the drive has failed - powers up, spins up but no computer can see it and it doesn't show up in the Disk Management tool.  I may have lost irreplaceable pictures and home movies.  I'd be using mirroring for just this reason.
HOWEVER - the 4TB drive I removed?  Haven't written a thing to it or used it in any way.  When I spin it back up, I get that Disk 14 is Healthy with "Storage Spaces Protected Partition".  Is there ANY way I can "re-attach"
this disk to the array to make up for whatever was on the 50% of the 1TB drive that was mirrored on the 4TB drive?  Only files who were on those two disks and no others would be affected and those are the ones I'm worried about.
Thanks in advance.

More replies
Answer Match 84.42%

Using the Windows Classic theme, can the 'All Programs' & 'Search' (which is useless) be completely removed from the Start Menu?
I'm talking about the entry All Programs bar and the Search entry, or can the useless MS Search be replaced with one of the many substitutes?

I do not mean the Search on the right pane.

I do use "all programs auto expander" to solve the annoyance of always clicking on the All programs to get the folders to show, but it would be superior to also get rid of that line all together. Or is this another futile request as it is to get rid of that equally useless Explorer bar??

A:Can the "All Programs/Back" & "Search" entries be removed?

The search bar is so very useful in 7, but to each his own. Try this:

Start> In search box (ironic, huh?) type Turn Windows Features On or Off> When the list loads, uncheck Windows Search> OK

For All Programs, this also applies to 7

Start Menu All Programs List - Enable or Disable

A Guy

P.S. Have you looked into Classic Shell ?

3 more replies
Answer Match 84.42%

Hello All,
A friend of mine gave me a few computers- because his office was upgrading all of their systems-
I reformatted many of them and installed windows me (they are too slow to support xp), but I am having a problem with one.
Originally it had windows 2000 pro as the os( I didn't have the password to log-into the computer) So I ran fdisk, formatted the hard drive, then tried to install the new os but I keep getting the error message upon booting that "invalid system disk, remove then press any key to continue".
I thought the cd-rom was bad so I replaced it, I changed the boot sequence, used a floppy to boot, even got the hard drive manufacturer's utility program to prep the drive for the os but even that doesn't work.
Am I missing something?
Does the fact that I didn't have the password to enter the computer have anything to do with this?
I used this same method for installing me on all the other systems and they are fine, but this one is an issue.
Thanks in advance for any suggestions.
 

A:OS Installation: "invalid system disk, remove then press any key to continue"

10 more replies
Answer Match 84.42%

What's a quick and easy way to remove windows.old since Disk Cleanup seems to be missing the option to do so in Windows 8 Consumer Preview.

Edit:
I gave myself permissions via CMD which failed(Every file access denied, even in an admin CMD), so I tried one last time to run a Disk Cleanup and when it finished I finally saw the option to remove it........ It was like the 5th time I've ran it and it seemingly randomly starts to work.

A:No "remove old windows installations" option in Disk Cleanup.

It's best to give yourself permission to access the entire drive before you install the new OP system. That way you will have permissions to do what ever you want with the contents of the drive from inside the new Op system. Of course hind site is always 20/20.

The disk clean up problem sounds like a bug to me, nice find.

3 more replies
Answer Match 84.42%

What's a quick and easy way to remove windows.old since Disk Cleanup seems to be missing the option to do so in Windows 8 Consumer Preview.

Edit:
I gave myself permissions via CMD which failed(Every file access denied, even in an admin CMD), so I tried one last time to run a Disk Cleanup and when it finished I finally saw the option to remove it........ It was like the 5th time I've ran it and it seemingly randomly starts to work.

A:No "remove old windows installations" option in Disk Cleanup.

It's best to give yourself permission to access the entire drive before you install the new OP system. That way you will have permissions to do what ever you want with the contents of the drive from inside the new Op system. Of course hind site is always 20/20.

The disk clean up problem sounds like a bug to me, nice find.

3 more replies
Answer Match 84.42%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 84%

hi guys... after installing windows 7, i notice there is something wrong with my safely remove program, my harrdrive (internal, not external) is appear in that list, how to fix this, because i think this is very anoying for me

thanx...

A:Why does my hard disk appear in "Safely Remove Hardware" ?

Does your board support hot swapping?
I have seen that happen before with controllers that support hot swap.

9 more replies
Answer Match 83.16%

When I open a program name photoshop a message comes up telling me that there's no disk in the drive. Please help me to remove this virus.

HiJackThis:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 3:42:39 PM, on 8/17/2010
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18943)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Lexmark 3500-4500 Series\lxdimon.exe
C:\Program Files (x86)\Lexmark 3500-4500 Series\lxdiamon.exe
C:\Windows\vVX1000.exe
C:\Program Files (x86)\Windows Live\Messenger\msnmsgr.exe
C:\Program Files\BigFix\bigfix.exe
C:\Program Files (x86)\LimeWire\LimeWire.exe
C:\Windows\CNYHKey.exe
C:\Program Files (x86)\IOI\Smart Copy\ButtonMonitor.exe
C:\Program Files (x86)\Yahoo!\Search Protection\SearchProtection.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\iTunes\iTunesHelper.exe
C:\Program Files (x86)\DivX\DivX Update\DivXUpdate.exe
C:\Program Files (x86)\AVG\AVG9\avgtray.exe
C:\Windows\ModLedKey.exe
C:\Program Files (x86)\Yahoo!\Messenger\ymsgr_tray.exe
C:\Windows\SysWOW64\DllHost.exe
C:\Program Files (x86)\Windows Live\Contacts\wlcomm.exe
C:\Program Files (x86)\MSN Toolbar\Platform\4.0.0379.0\mswinext.exe
C:\Program Files (x86)\Common Files\Real\Update_OB\realsched.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Google\Google Toolbar\GoogleToolbarUser_32.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program ... Read more

More replies
Answer Match 83.16%

When I initially installed Win7, like a good boy, I unplugged all drives but my SSD. After installing, I plugged in my other drives. And life was wonderful.

A week ago, I wanted to send a Win7-formatted SSD to a friend of mine. So I got the SSD, unplugged my SSD, plugged his in, and installed. I forgot to unplug my other drives.

After many System Repairs, I finally have the system working again, but I can't for the life of me assign my C drive as System, Active, Primary Partition. The closest I can get is Active and Primary Partition. Check out my pic:



I've used diskpart, tried EasyBCD, tried everything. If I unplug all my other drives and boot with just my SSD, then in Disk Management, everything looks as it should -- the C partition is also labeled as System. But if I hook up the other drives, the System designation goes to my E drive.

How can I right this wrong? I know I can format the E drive, but there's like 600GB of data on there and I'd rather not do that if I can help it.

A:Remove "System" Designation from Disk 2

1) Boot the Repair disk.

2) Mark the System Reserved partition on Disk 0 ACTIVE (in your screenshot Disk 1)
Partition - Mark as Active

3) Mark the Disk 1 INACTIVE (in your screenshot Disk 2)
Partition - Mark as Inactive

The Disk 0 in your screenshot is UNKNOWN.

7 more replies
Answer Match 82.74%

I downloaded the game in Winrar format on the desktop and when I tried to extract it to specific folder,I have this error message:-

There is not enough space on disk
Write error: only NTFS file system supports files larger than 4 GB

On my local C: drive I have more than 15 GB available.What do i do now?
Help is very much appreciated.
 

A:"not enough space on disk"???

Your hard disk is FAT32 format? The problem is that the file is larger then 4 gigs, so a FAT32 HD can't handle it, what u need to do is reformat ur computer so its NTSF. Except that means you will lose everything on your drive I think
 

3 more replies
Answer Match 82.74%

I have a virus that eats up all of my available disk space. I have deleted most of my programs, and after the deletions are done, the space I made available fills right back up again. I ran (online) Norton/Symantec, trend micro house call, and AVG. I had to do it online since I need more disk space to run a resident virus program. The only way I can stop the monster from filling up any space made avalable is to delete a program and come up in safe mode. As soon as I reboot to full windows , the space I made availabe fills up. It seems to leave at least 170 to 200 Meg available. The PC is a Dell laptop with a 10 gig drive. And at this point, few programs!

More replies
Answer Match 82.74%

Can anyone suggest a remedy, please?
I recently ran a full PC recovery from my back up DVD-ROM disks. This was about the fifth time I've had to do it, due to infections, etc.
I have 3 recovery disks, but it only ran disc 1, and never asked me to put in the other two...
When I rebooted, I soon realized that I only had 1 or 2 GB of free space.
The C: drive is around 80GB in size and obviously should not be this full.
I suspect it may have to do with the partitioning, or something I did in my previous 4 system restores...
By the way, the last time my HP crashed (about 2 months ago), I got fed up with Windows and tried to install Linux, but I was never able to figure out the code or process necessary for Linux to run my wireless driver, and couldn't connect to the internet, so I reluctantly just re-installed Windows from the disc.
Can anyone help, please?

A:help with "Low Disk space"

Why not scan your hard disk with a disk space utility like showsize(showsize.com)? See what you come up with. You will be able to see the largest folders on the folder sizes report and the largest file on the Only files report (if you sort on Size column).

4 more replies
Answer Match 82.74%

In Word and Excel, when you type "2000", the program automatically changes it to "2001". I have tried changing the regional date system to .../yyyy, with no avail. I have many workstations, and this is the only one with the problem. I also tried re-installing the program, but nothing seems to work.
 

A:Microsoft Office changing year "2000" to "2001"

6 more replies
Answer Match 82.74%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 82.32%

How to remove the "Authenticated Users" "Create Folders" permission from the root of the C Drive via command-line?
I know this question has been asked many times before, but nothing works for us!
We tried the following:
Take ownership: I cannot take ownership using the Administrator account (local and Domain Admin accounts) of the root C:. Error Access Denied
Cuurent root C: owner is TrustedInstaller and acnnot be changed.
We cannot change or remove the Create Folders permission of the Authenticated Users of the root C: . Error Access Denied.
Drive C: is hidden via GPO, but many users can enter it from the File-Explorer and create folders in the root C:.
We do not want -for many reasons- to Block/ Prevent Access to C: via GPO.
We also tried to run cacls and/or icacls under the system-account (PSEXEC -i -s -d CMD). Error Access Denied.
icacls C:\ /deny *S-1-5-11:(NP)(AD)
Error Access Denied.
icacls C:\ /remove:g *S-1-5-11
Error Access Denied.
cacls c:\ /e /c /R "Authenticated Users"
Error Access Denied.
Also using GPO "Computer Configuration\Security Settings\Restricted Groups ..." does not work!
Now we have this issue on over 450 pc's on our network. Nothing work. Please help! How to remove the "Authenticated Users" "Create Folders" permission from the root of the C: Drive on command-line?


win_builder

More replies
Answer Match 82.32%

I have XP and trialled Microsoft Office 2007 for 3mths. The trial period expired and I went back to my old OE6. I decided to uninstall the trial Office 07 as I couldn't afford to purchase it, but now Outlook Express has disappeared? Where are all my emails, address book etc???
 

A:HELP! Trial Office 07 removed, now OE gone?

It's all good - I found it. OE6 wasn't in it's usual place - I'd click on Email and it would come up with Internet options.

I found it in All Programs - I should've looked ther first but panicked...

SOLVED - thanks.
 

1 more replies
Answer Match 82.32%

Hey everyone, here is my serious problem.

Unfortunately, I was stupid enough to let my "Free Space" on my entire computer get to less than 5 GB left. It may possibly have been at 4 or 3 GB, actually.

My computer then froze, and I went to restart it. However, it would just take me to the blue screen of death. I've tried booting it up in every way I could think of, in normal mode, in Safe Mode, with the "Repair Windows" option, and everything else. My computer will simply not get past the "Loading" screen.

On the blue screen of death, it does say "Check to see if you have adequate disk space", so I am guessing that is a big part of the problem.

But here's my question. How do I free up disk space when my computer cannot even run?

*Note: I've tried going on the BIOS and Advanced Start Up, but I can't seem to find any options that would help with my situation..*

A:BSOD: Cannot start up normally, cannot start up in Safe Mode, "Inadequate Disk Space"

Hi,

Use Ubuntu to free the space.

You can get it from here: http://www.ubuntu.com/desktop/get-ubuntu/download

Step #2 on that page shows you how to create the USB/CD.

Then once you boot into it (choose the option where it just runs off the USB/CD) you can use it to delete your files or to copy them from the Windows Drive to an external hard drive (Note: Do not copy anything to the Ubuntu Filesystem as it will not be saved on shut-down)

Regards,
Reventon

3 more replies
Answer Match 82.32%

I have almost 2 Gb of music on my computer that I'd hate to lose. And hate to have to rebuy or redownload too.

So what I'm wondering is... can I back up all that music on 3-4 700mb disks as a data disk instead of making a 70 minute music disk?

I have Sonic RecordNow that I use for music burning and data backup. I'm just wondering if it is possible to back up 1/3 of it in a folder as a data disk, and do the same for the other parts.

Possible? Would this work?

It would make much more sense to have 4 disks that although you could not PLAY them in a CD player as the songs would be stored in a folder on it, to just be able to copy them out onto another computer instead of making 20+ audio CD's.

Would my idea work? Help me out guys...
 

A:Backing up music as a "data" disk instead of a "audio" disk? Possible?

7 more replies
Answer Match 82.32%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 81.9%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 81.48%

Hello! ... How about removing these two:
"Restore previous versions" and "Share with"

A:Remove "Restore previous versions" and "Share with" from context menu

Hello Pcunite,

This tutorial can show you how to remove Restore Previous Versions from the context menu.Restore Previous Versions - Restore or Remove from Context Menu - Vista Forums
In addition, if you like, this tutorial will show you how to remove the Previous Versions tab in the poperties page.Previous Versions Tab - Restore or Remove from Properties - Vista Forums
This tutorial can show you how to remove Share with from the context menu.Share with - Restore when Missing in Context Menu
Hope this helps,
Shawn

3 more replies
Answer Match 81.48%

After a catastrophic computer failure, I managed to recover almost everything. However upon booting up I got the message "BOOTMGR is missing". I used the original Windows installation disk to do Startup Repair, which recovered BOOTMGR. However now every time I boot up I get a message from Windows Boot Manager asking me to choose between "Windows 7...(recovered)" and "Microsoft WIndows Recovery Console". How can I get the computer to boot straight into Windows 7?

More replies
Answer Match 81.48%

Greetings.
So, I would like to remove "Paste shortcut" and "Undo delete" from the right-click desktop menu.
Wasn't able to locate either in the registry.

More replies
Answer Match 81.48%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

A:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Answer Match 81.48%

First off, thank you for any assistance in advance.

Problem: "System Alert" balloon in tray icon that will not go away and redirects me in IE 7 to hxxp://www.virprotect.com/?aff=1012.

Using SpyBot Search & Destroy and Ad-Aware SE, I seem to have gotten rid of the problem of the redirection of my home page as well as removed the trojan that caused all of this in the first place (I think). The pesky balloon, however, remains. All pre-steps your forum recommeded have been completed. Below are the logs your forum requests in advance (please note that my DSS "extra" log file is attached):

PANDA ACTIVESCAN
===============

Incident Status Location

Potentially unwanted tool:application/myglobalsearch Not disinfected c:\program files\MyGlobalSearch
Spyware:Cookie/Atlas DMT Not disinfected... Read more

A:[SOLVED] Trying To Remove "System Alert" Balloon That Directs To "virprotect.com"

Download SDFix from here and save it to your desktop.


Please then reboot your computer in Safe Mode by doing the following :
Restart your computer

After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, a menu with options should appear;
Select the first option, to run Windows in Safe Mode, then press "Enter".
Choose your usual account.

In Safe Mode, right click the SDFix.zip folder and choose Extract All,
Open the extracted folder and double click RunThis.bat to start the script.
Type Y to begin the script.

It will remove the Trojan Services then make some repairs to the registry and prompt you to press any key to Reboot.
Press any Key and it will restart the PC.

Your system will take longer that normal to restart as the fixtool will be running and removing files.
When the desktop loads the Fixtool will complete the removal and display Finished, then press any key to end the script and load your desktop icons.

Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt
(Report.txt will also be copied to Clipboard ready for posting back on the forum).

Finally paste the contents of the Report.txt back on the forum.


=========================================

This will help to identify malware on your system.
Please download Combofix from any of these locations:
... Read more

9 more replies
Answer Match 81.48%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 81.48%

Hello, TSG!

Just yesterday I was using the computer normally until I got a Blue Screen. Getting a blue screen is usually something normal that occurs to my every so often, so I didn't mind it and rebooted the computer normally. However, I got two more blue screens within the next hour. The 3rd time rebooting, my computer starts to act strange as if it had a virus. Upon powering up the monitor would just display a black screen with two lines about something --- which I don't remember, sorry --- and stayed like that unless I plugged out the power cord or held on the power button to shut down. Then when after a few tries it boots and displays a message "Floppy Disk Failure" and "Drive 1 not found: Serial ATA, SATA-1" (and the same message for Drives 2 and 3) show up. Also it asks me to continue loading by pressing the F1 Key.

When Windows loads the first time, it displays a message saying a bunch of hardware has just been installed and ready for use. Also, my internal clock resetted itself back to Monday, November 07, 2005 (Which, if I recall, is the date when I got the computer) and my speakers do not work.

TL;DR Version
3 blue screens within a short time
Floppy disk fail
Drivers 1-3 not found: Serial ATA, SATA-1-3

Anyway, I browsed through Google but I haven't seen anyone with both problems. I disabled my Floppy Disk Drive and that message doesn't show up anymore, but the others do and my computer still isn't fixed. I ran a vir... Read more

A:Solved: "Floppy Disk Failure" and "Drive 1 not found" problem

9 more replies
Answer Match 81.48%

I have "Photo Editor" in my "Office" suite. The "Zoom" and "Select" functions do not activate when I drag them from the Tool Bar. I have the installation CD for "Office." Would I be able to find "Photo Editor" on the CD and do a 'repair' reinstallation? Perhaps there is another solution to the problem.

Your response(s) will be appreciated.

{redoak}
 

A:Solved: "Photo Editor," within "Office," problem

7 more replies
Answer Match 81.48%

I have someone who works from home to connect to an office computer to access a database. Now, she wants to print out of her printer from home from the program she is using. She connects via VNC on a dial-up. Now the only thing I had in mind was to some how network her printer to be available to an outside source from home and add it as a shared printer on the office computer. Is this possible with a dial-ip and also not being on the same network? I wonder if I could do it through HTTP or something similiar?
 

A:Using VNC and want to print to "home" printer from "office" computer

That is one of the limitations of VNC. You can't print to a local printer.
 

1 more replies
Answer Match 81.06%

I can't "extend" my "C" Drive even tho there is free space??
 
I have 251GB free and I cant add it to my C OS drive?
 
Picture:
 
http://img577.imageshack.us/img577/7577/helpc.png

A:I can't "extend" my "C" Drive even tho there is free space??

The Free Space is in an Extended partition.
Right click on the free space and delete the Extended partition. You can then extend the C partition into the Unallocated space released.

20 more replies
Answer Match 80.64%

safe to assume its impossible to remove the "open" and the "merge" entries from the context menu? I figure if i want to open or merge them i would simply double click. Clutter and redundency in this vein dont suit me :P

A:remove the "open" and "merge" entries from context menu?

Open I don't think so, Merge sounds like it is added by a 3rd party program, and likely can be removed. Have a look at ShellMenuvVew and ShellExView from NirSoft. You can remove entries with both. But Open will not be listed, and I have seen no way to remove it. A Guy

2 more replies
Answer Match 80.64%

Hi there,

I didn't really know how to google for this (although I did), so I didn't find anything proper and like to ask you: How do I remove the "labels" from drive types in "Computer" window? What I mean:
These labels above the different drives are really annoying, as I'm accustomed at one item after another and somehow one could change it to that view in every OS every since (XP, Vista), but now it doesn't seem to work? (I tried all the context menu items )

Any ideas? Thanks for your help in advance, much appreciated!

Kind regards

A:Remove "labels" from drive types in "Computer" window?

you can change the view a bit by using the button highlighted below - i don't know if you can remove the labels though...

7 more replies
Answer Match 80.64%

Hi, when I type in my address in I.E./Windows Explorer I can see the folder that I shared on the lan but I also get two extra folders "Printers and Faxes" and "Scheduled Tasks". How do I get rid of them?

Also, is it possible to limit users to download 1 file at a time from me?
 

More replies
Answer Match 80.64%

Hello

I have these 2 unwanted icons on my desktop, "Click to find & Fix errors" and " Sportsbook Football". I don't what type of programs they are but they downloaded themselves without my authorisation and I can't get rid of it.

I have run Ad-Aware, Spybot, The Cleaner (trial version), AVG anti spyware, Webroot (trial version),Windows Defender.

I think it was Webroot Spy Sweeper or The Cleaner that removed "Click to find & Fix errors" but it kept coming back.



Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:28:08 PM, on 5/22/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Java\jre1.6.0_06\bin\jusched.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Apoint\HidFind.exe
C:\Program Files\Apoint\Apntex.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Grisoft\AVG Anti-Spyware ... Read more

A:Help remove "Click to find & fix errors" and "Sportsbook Football"

Hello
Can anyone help please?

Thanks

19 more replies
Answer Match 80.64%

Hi guys. I'm new here. I've tried to read all the discussion about how to fix the unallocated hard drive but I just can't understand it as the cases were pretty much different than I'm facing of.

Here's my problem.
Yesterday my external hard drive seems normal, everything is fine, until there's a blackout and I have to put "sleep" to my laptop. After the power got back, the hard drive suddenly gone and when I check the list of drives under "Disk Management", it showed up as "Disk 1 - Unallocated".

(I've attached screenshots here for your viewing)

My external hard drive is WD My Passport 1TB. It contains a lot of valuable data I cannot afford to lose. I really hope there's a way to fix this, and once I get back all of those precious data I will buy another HD to transfer them ASAP because I cant let this happen to me again.

Your help is so, very much appreciated.
Any questions regarding my problem, let me know. I'll provide all of the details you guys need.

NOTE
1) I've tried TestDisk but on the "Analyse" process, it says "read error"
2) I've changed cable, but the situation remains the same.
3) I've tried Recuva, but it doesnt recognize my external drive.

A:WD EXTERNAL HARD DISK 1TB suddenly "unallocated" and "not initialized"

Hi!

First don't mess up with the WD drive settings.. download partition wizard 7 (its free)..then .. open it ..click wizard(menu) .. select partition recovery wizard.. and it will find the partitions on it i think.. that way you can recover your partition that has been lost.

9 more replies
Answer Match 80.64%

i want make a dvd disk for my compaq recovery, but it always shows "this is not a blank disk, please insert a blank dvd?". wut should i do to get a recovery dvd? (i have updated my drive, but nothing useful. i have tested my burner with nero, it works fine.)
 

A:"compaq Recovery Cd/dvd Creator"!!! why it always shows "this is not a blank disk"?

plz help!!!
 

1 more replies
Answer Match 80.64%

My hard drive not showing in "my computer" or "Disk Management" but is showing under device manager. I got the hard drive from a friend and his dad had put a Password encryption on it. Any Ideas?

More replies