Tech Problem Aggregator

Solved: "There is not enough memory or disk space to complete the operation."

Q: Solved: "There is not enough memory or disk space to complete the operation."

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer

A: Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.

3 more replies
Answer Match 91.8%

Hi,

I was working on a large document on Microsoft Word 2010 (Home and Student), saving as I went along as usual, until I tried to save it again and instead received the above error message. When I clicked "OK", a second error message appeared: "There is not enough memory or disk space to update the display". The fonts were all changed, and the pages appeared in the draft layout. I've uploaded the document onto OneDrive and opened it via Word Online, and it's opened fine - formatting is all correct and I haven't lost any work.

My laptop is barely a month old, and the C: drive has plenty of GB free. I've performed a disk cleanup, and the laptop is currently in the middle of a full anti-virus scan. I'm still getting to grips with using Windows 8, and I've never had this message before on any version of Word, so I don't really know what to do. How can I fix it?

Thanks in advance for any help.
 

A:Solved: Word 2010 error: "There is not enough memory or disk space to complete the op

7 more replies
Answer Match 81.3%

I have been exploring how to make a backup so that if my computer dies I will have some record (I assume that is what it means) to put on a replacement computer to make it similar to the one I am using now

I use Firefox so tried their FEBE extension ....
FEBE Firefox Extension
but that didn't seem what I wanted

I then tried Tweaking.com Registry Backup as I already have their Windows Repair Pro which I was advised to install in case I ever have problems in the future with something going wrong but have not had to use (yet?) ....
Registry Backup
but didn't understand how I could get that on to a new computer.

So, I uninstalled both of those and have been trying to make a backup onto a memory stick but am running into problems that I will do my best to explain clearly.

I have tried two new 4GB memory sticks and followed the advice in Control Panel, Backup and Restore.

The Start, Computer screen confirms that Drive I (the memory stick) has 3.85GB free before I start.

All starts well but after a while I get the following message "The disk that your backups are being saved on doesn't have enough free space" and also says that I only have 1.39MB free of the 3.8GB.

So I found a video and tried to follow the instructions carefully ....
https://www.youtube.com/watch?v=ZRdkLClj5rQ
and did so until 2.40 in. The previous steps I followed were fine but I simply could not find the Windows Backup file.

I followed the instructions to delete that backup and tried again. I... Read more

A:"Not enough space left to complete backup" on 4GB empty memory stick?

Best to make a full copy (image) of your hard drive, to recover. The Windows backup only backs up certain files. You are still left to reinstall most everything (including Windows). The Marcrium Reflect (a UK company), free version, will do nicely. But, you need something more than a disc or flash drive. A USB connected hard drive would probably be best.
Macrium Software

2 more replies
Answer Match 79.5%

This morning when i turned on my computer the windows audio service wasn't running even though it is set to automatic. I also wasn't able to sign into Windows Live Messenger.

When trying to start the Windows Audio it gave me the "Error 0x8007000e: Services not enough storage available to complete this operation.

Any ideas? I've spent a good 3-4 hours browsing similar errors but with no use.

Thanks in advance

A:[SOLVED]"Services not enough storage available to complete this operation."

In fact I get the same error code in WLM as well '8007000e".

19 more replies
Answer Match 106.26%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 105%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 102.06%

Hello all fairly new to this page so would gladly apreciate some advice on trying to get past a niggly error message which is recuring despite carrying out Microsofts Solutions.
Any feedback will be a bonus as this fault is randomly popping up and is incredibly annoying doesnt seem to happen at specific times say when creating a task as microsoft document .
We are recieving a "Could not complete the operation. One or more parameter values are not valid".
For which i have tried a number of differing solutions via microsoft including creating new mail profile, renaming outlook data files, .ost and .pst repairer tool, outlook check and repair facilty as well as removing live meeting which can aparently cause a conflict. We are using Office 2003 SP1 and this is a networked PC gettin mail from Exchange 2003 server. An isolated incident here but still very annoying as other computers run fine using same hardware and OS ) Thanks Again Have fun all
(Work to live dont Live to work)
 

More replies
Answer Match 98.28%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 98.28%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 98.28%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does "Compress Contents To Save Disk Space" do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 97.86%

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A:[SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space o... Read more

4 more replies
Answer Match 96.6%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 96.6%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 96.6%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 96.18%

can no longer open any of my Office programs. I have tried to
uninstall/reinstall and it hasn't fixed it. I have tried a system restore on
multiple dates and that hasn't fixed it.
I have checked: 1.4 GB of available memory
I am running Windows7 installed and Microsoft Office 2007 with service pack 1 and I believe all the updates that
are available.
All Microsoft programs I try to open pop up with the same error message.

A:There is not enough memory or disk space to run word"

usual sign of being infected by a virus or malware. respond accordingly.

Other issues can be you have never run disk cleanup or disk defrag which results in no available space on the server as well as being severely fragmented file system.

You should start by running chkdsk /f on the volume to check for disk or file corruption errors.

7 more replies
Answer Match 96.18%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 95.76%

when i try to start windows media player, i get "can't perform operation, low memory." i've tried uninstalling and redownloading it but it says i have all the current components and i can't finish installing it...why does this happen?
 

A:Windows Media Player "can't perform operation, low memory"

Hiya and welcome

Go to Run and type MSINFO32
On the left choose Software Enviroment, then Startup Programs. Copy/paste the list here.

Regards

eddie
 

2 more replies
Answer Match 95.34%

Ok, all the problems started here...A message popped up from the taskbar, a file name with a *.dll extension (forgot the name of the file) has been corrupted - run chkdsk. So I restarted the computer and it did a check for errors after bootup. I tried to open windows media player right after all this. The following message was displayed, " Can't perform operation, low memory", with a loud beep. Similarly none of the audio players work, all of them give different messages. I can play a game (NFSU2) but with no audio. Norton Antivirus gives me a message too "Internal program error". Moreover, Copy and Paste doesnt work, Internet Explorer - right click and open in new window doesnt work, does work on mozilla though. Windows XP is also taking longer time to load.

Dont know whats going on , could it be a virus? Please help...Thank You

System Specs
Dell Inspiron 8600 notebook
512 MB RAM, Win XP home, Pentium M , 32 MB video

A:Please help - Win XP error message - "Cant perform Operation, Low memory"

I'm having the same problem. Internet Explorer is also behaving strangely, many links don't work as they should. Outlook Express (XP) has plenty of room to suck down 30 or more new incoming emails but if I dare hit 'create email' I get the awful beep and the message about low mem. Same thing as you for media. I can't even open most pictures with the viewer. I can only see those in paint and audio or .avis, forget it.

Grr. I only bloody formatted and installed 2 days ago from a completely new HDD! No way I got the dreaded lurgie virus in that time, despite not running an antivirus since the installer for McAfee (bought over the net from their site) is on my accidentally wiped HDD and I've only made up this install to get all that kind of data back. Tomorrow antivirus goes on -all my critics, 0_o Also this partition is 200gb (170gb show up in properties). Windows XP takes up 4gb.

I'm thinking we both could have a buggered virtual memory file. I just partitioned within windows using Partition Manager to test it out by splitting my drive in half, while getting used to it in the hope I could use it to get my data back. Didn't work but I bough R-Studio in the end and all appears happy. I just wish I could test all my .avi and .jpg files! I'm not sure if they've been resurrected off my dead HDD properly bc windows is already having this problem with the multimedia software!

I can't wait to do a fresh install of Win 7 tomoz after my data comes back. I'm sure that will fix ... Read more

2 more replies
Answer Match 94.92%

I have Windows XP Pro with a Raid Arrray 0 Configuration (3 hard drives) and windows won't let me run the Disk Defragmenter, it says "command line operation of disk defragmenter is not supported"
 

A:"command line operation of disk defragmenter is not supported"

Try Start>Accessories>System Tools>Disk Defragmenter
 

1 more replies
Answer Match 94.08%

Yet another problem with my Dell (Windows XP). My windows media player will not play. An error pops up saying "cannot perform operation, low memory". How can I fix this? Thanks.
 

A:"cannot perform operation, low memory" error

Check out this article: http://www.microsoft.com/windows/windowsmedia/9series/player/playererrors.aspx
 

1 more replies
Answer Match 94.08%

Hi!

So I was going to try to fix a problem with an laptop, where you couldn't find any available networks. However when I was going to try some solutions, I stumbled upon another problem. When I ran things like the Device Manager, Windows Update or the Administration Tool I received a note that said "There isn't enough storage available to complete this operation" from Microsoft Management Console. I checked my RAM and hard drive and they've plenty of space available so I don't really understand what the problem is. I would really appreciate some help.

A:[SOLVED] Not enough space available to complete this operation!?

Hi and Welcome to TSF!

How much memory and hard drive space is on the PC?

Are you using a custom Page File or was it ever removed?

5 more replies
Answer Match 93.24%

Please can somebody help with this minor but annoying matter. When turning on my business computer one morning, the space bar and return/enter buttons are visable when i type emails, but when i send them, they are not. I know its a setting, but can anyone tell me what setting and how to turn it off?

Thanks!

A:[SOLVED] "Space bar" and "return/enter" are visual on emails! Help

You need to tell us what email client you use as these days not everyone uses the built-in one.

4 more replies
Answer Match 92.4%

IN BRIEF:
-asus e900 windows xp service pack 2
-could not get into OS proper. will only reach welcome screen
-netbook restarts when lead to safe mode
-not sure if accidentally pressed hibernate

what can be done?? please help!
 

A:HELP! error message:"memory resources exist to complete the API" seen before welcome

Add any RAM recently? This issue generally has something to do with hibernation mode with systems that have more than 1GB of memory, however this seems unrelated. I would say that your OS is cooked possibly, if it was bad RAM or power supply or mobo it would have more symptons so it is definetly software related in my opinion, my suggestion would be to get the data you need off with a live CD, then install a freash copy of windows.
 

1 more replies
Answer Match 91.98%

Hi all,

I think this is quite a common problem, from what google searches have returned, but i can't quite find the exact problem as this:

I sent my friend an e-mail for a school project, but he had forgotten to tell me (he told me the next day) that he can't access his e-mail.

He didn't give much info, only that:
When his e-mail is accessed (AOL), after about 10-15 seconds, a blue screen appears stating "Physical memory Dump complete"

Any way this can be fixed without too much hassle from his end (he's not much good with comps)?

TIA,

Nappymonster

A:Blue screen of Death: "Physical Memory Dump Complete" When e-mail is accessed

Hi

You'll need access to your friends computer or to help him some way or another. A BSOD can be basically anything wrong, many times it is corrupt RAM or a process driver. Ask your friend to ZIP (using WinZIP) the minidumps found in C:\WINDOWS\Minidump\ and attach that back with your next post. That's the best way to analyze.

3 more replies
Answer Match 91.56%

I reformatted my computer about 4 weeks ago. Every week I've been doing routine maintenance. Ad/spy/virus check, follow by cleaning of Internet temp files, cookies etc etc.


After that I would do a scan disk and the last 4 weeks has been ok, it completed to phase 3.

Now for some reason it doesn't complete phase 2.

Anyway ideas?

Windows XP, Service pack 3 installed.

A:"Windows was unable to complete the disk check" Stuck on Phase 2

Hmmmm? I just cleared the cache, cookies, etc on firefox which is the default browser I use. Clicked scan disk and it completed pass phase 3.

What the is the relationship between clearing cache, cookies etc that makes scan disk work?. Because it seems I have to clear all those date before scan disk can be completed. Why?

I would have thought clearing cookies, history temporary files via control panel > Internet options > general clears all the data but it seems I have to clear it through firefox too? Why?

What the is the relationship between clearing cache, cookies etc that makes scan disk work?

Another thing. As I managed to complete scan disk. I decided to re check it just incase, at this point I was surfing the net reading some emails, etc and scan disk did not complete.

WHY???

19 more replies
Answer Match 91.56%

I'm trying to repair a crashed Win 7 computer. I booted off the installation disc and ask it to do a repair. Currently it's "Attempting repairs... Repairing disk errors..." It says this may take over an hour and it's been doing this for just over 2 days (blue bars running across the screen). How long should I keep on waiting? Is there any alternate solution?
Please help...
Thanks.

A:How long to complete: "Attempting repairs... Repairing disk errors"?

It takes a while to run that, but not nearly that long. It can take a couple of hours depending on the size of the hard drive and the errors it finds but not nearly 2 days. I would try to run check disk from this tutorial, if you can't boot you would need to use option 2. I would try running chkdsk C: /F /R

3 more replies
Answer Match 91.14%

Trying to clean up the wife's system, which has not been accomplished in a VERY long time.
Tried to do a "Defrag", was told it had to do a "Check disk" first.
When I set it to accomplish that with the next "Restart", I was then prompted with 'cannot open volume for direct access check disk'

Sooooo, wizards.... your thoughts?
Thanks... as always.
Sky
 

A:Can not open disc to complete "Check disk"

Skyholder said:


Trying to clean up the wife's system, which has not been accomplished in a VERY long time.
Tried to do a "Defrag", was told it had to do a "Check disk" first.
When I set it to accomplish that with the next "Restart", I was then prompted with 'cannot open volume for direct access check disk'

Sooooo, wizards.... your thoughts?
Thanks... as always.
SkyClick to expand...

http://support.microsoft.com/kb/823439
 

2 more replies
Answer Match 91.14%

Hi Everyone! I thought I had a pretty secure machine but I have learned otherwise.

As instructed, I am trying to start the process of asking for help here on malwaretips.com, but FARBAR keeps giving me the error "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1"

I hit Cancel, Try Again, or Continue and nothing closes. The error message just pops up again.

I have not rebooted yet, bc I was hoping to leave things intact for now. Short of rebooting, does anyone have any suggestions? There are no USB drives attached.
 

A:Cannot get FARBAR to complete. Error "There is no disk in the drive..."

Well, I shut down the Event Viewer and the error window went away, and FARBAR completed running.

Strange but glad I can continue!
 

1 more replies
Answer Match 90.3%

Hello, TSG!

Just yesterday I was using the computer normally until I got a Blue Screen. Getting a blue screen is usually something normal that occurs to my every so often, so I didn't mind it and rebooted the computer normally. However, I got two more blue screens within the next hour. The 3rd time rebooting, my computer starts to act strange as if it had a virus. Upon powering up the monitor would just display a black screen with two lines about something --- which I don't remember, sorry --- and stayed like that unless I plugged out the power cord or held on the power button to shut down. Then when after a few tries it boots and displays a message "Floppy Disk Failure" and "Drive 1 not found: Serial ATA, SATA-1" (and the same message for Drives 2 and 3) show up. Also it asks me to continue loading by pressing the F1 Key.

When Windows loads the first time, it displays a message saying a bunch of hardware has just been installed and ready for use. Also, my internal clock resetted itself back to Monday, November 07, 2005 (Which, if I recall, is the date when I got the computer) and my speakers do not work.

TL;DR Version
3 blue screens within a short time
Floppy disk fail
Drivers 1-3 not found: Serial ATA, SATA-1-3

Anyway, I browsed through Google but I haven't seen anyone with both problems. I disabled my Floppy Disk Drive and that message doesn't show up anymore, but the others do and my computer still isn't fixed. I ran a vir... Read more

A:Solved: "Floppy Disk Failure" and "Drive 1 not found" problem

9 more replies
Answer Match 88.62%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originall... Read more

A:"Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 88.62%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 88.62%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.
 

A:Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A:"Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 88.62%

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?
 

A:Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.
 

1 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 88.62%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 88.62%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 88.62%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.2%

Getting this error message "instruction at "0x7c91b1fa" referenced memory at "0x00000010" could not be written. Have looked at previous threads and tried turning off automatic updates, also tried to find "Windows Driver Foundation" but this is not in the local services list.
Problem does not occur in Safe mode.
System is XP laptop.
Any ideas please?
 

A:Solved: "0x7c91b1fa" referenced memory at "0x00000010".

8 more replies
Answer Match 88.2%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 88.2%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 88.2%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 88.2%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 88.2%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 87.78%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A:New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 87.36%

Help, I keep on getting a "Windows Security Alert" popup appearing that says:

"Warning ! Potential Spyware Operation!

Your computer is making unauthorised copies of your system and
Internet files. Run full scan now to prevent any unauthorised access
to your files! Click YES to download spyware remover ..."

This is currently appearing about every 5 minutes.

Also, I ran Spybot S&D, and it detected and removed Smitfraud.C

I just checked in my startup folder and found 2 programs that I think shouldn't be there "autorun.exe" and "system.exe"

What's going on here?
Logfile of HijackThis v1.99.1
Scan saved at 9:38:26 AM, on 17/10/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\SUPERVOC\PROGRAM\PICPMON.EXE
C:\Program Files\Raxco\PerfectDisk\PDAgent.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\UPHClean\uphclean.exe
C:\WINDOWS\system32\Z... Read more

A:Solved: Regular popups - "Warning! Potential Spyware Operation!"

12 more replies
Answer Match 87.36%

Hello,

I'm setting up printer sharing on an XP system. I ran the wizard and gave it the okay to share printers.
When I go to my printer options 'Share' tab, select 'Share this printer' and click 'Apply' I get:

"Printer settings could not be saved. Operation could not be completed."

What would cause this?

Thank you.
 

A:Solved: "Printer settings could not be saved. Operation could not be completed."

Nevermind. 'Server' service was disabled. Enabling this service fixed the issue. Hey, I'm getting good at this.
 

1 more replies
Answer Match 87.36%

My computer had been working perfectly until now. I carried it in my backpack for a little bit, and when I tried turning it on at home, a black screen came up saying "Operation System Not Found." What's wrong??

I hardly know anything about fixing computers. I obviously didn't meddle with the operating system or whatever. I really don't know what's wrong.

I remember you're supposed to press the F2 key. I did, and a screen came up that's titled "Insyde H2O Setup Utility Bios Version R029Q2." I have no idea what that's about so I didn't do anything else.

I'm using a Sony VAIO laptop with Windows Vista.

Please help!

A:[SOLVED] URGENT! Can't boot computer, "Operation System Not Found" error!?!?

I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
http://www.carrona.org/memdiag.html (read the details at the link)
http://www.carrona.org/hddiag.html (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: http://www.carrona.org/malware.html (read the details at the link)

3 more replies
Answer Match 86.94%

Dear Friends,

When trying to export Personal Folders (including sub-folders) using the Import - Export tool, in Outlook 2007, the following happens:

1. The operation goes smoothly till I type and (retype) a password, which is saved.
2. Within a few seconds, I get the message "The operation failed. An object could not be found".
3. When I check the file which I had earlier named, to store the data, I find it's there, but with only 5% or 10% of the data.

Could you please guide me what steps I could take?

With thanks,
 

A:Solved: "The operation failed. An object could not be found"

12 more replies
Answer Match 86.94%

I just ran into another unreasonable restriction on access to my own computer in Windows 7. When using MS Outlook 2003 this evening, I tried to open a link inside an email from a forum moderator. It contains instruction on how to change my password after having to reset it. A message pops up saying "this operation canceled due to restrictions on this computer. Please contact your system administrator".

This is moronic I am the only user on this computer and am the administrator. I don't have a clue on how to fix this.

I am also blocked from opening folders in some cases too. For example, I want to access my program application data and get a similar message.

This is the stupidist thing that I have seen Microsoft do in many years. Are their programmers morons or just not able to realize that real people will be running their programs and we are not all located in a huge room with administrators running all over the place.

Is theire a way to overcome this idiocy?

Thanks
 

A:Solved: Win 7 "operation canceled" on outlook link

10 more replies
Answer Match 86.52%

My system crashed recently and I have had to restore everything. I reinstalled Outlook 2007 and was able to restore my PST file from a backup I had using the genie backup product. All my files and folders are now restored.

When I click on the send/receive button, I get this message "The operation failed. An object could not be found"

I deleted my email setup account (I'm downloading from my att account) and re set it up using the instructions on the att site. I also ran the 'repair' function off the Office CD and did the Office diagnostics.

Any suggestions?
 

A:Solved: Outlook 2007 wont send/receive - error message "operation failed"

Can you give us the exact message.
Are you saying you did a clean install where you formatted and partitioned the drive?
 

3 more replies
Answer Match 86.52%

These illegal operation messages just started popping up:
"ATTNENGN" caused an invalid page fault in module MSVCRT.DLL at 0167:780018ee.
"WEB" caused a general protection fault in model WEB.EXE at 0001:0000bb4c.
I haven't installed anything or downloaded and everything seems to be operating OK. But these messages are appearing for a reason and I would like to fix the problem. Thanks.
 

More replies
Answer Match 86.1%

I have windows 98 and the last few days everytime I try to play solitaire (by using start-programs-accessories-games-solitaire) I get the message Illegal Operation - will be shut down, etc. When I go to details I get "SOL caused a general protection fault in module SOL.EXE at 0001:000060d. Can you help me?
 

A:(Solved) Solitaire "Illegal Operation"

6 more replies
Answer Match 85.68%

When a download is complete, the dialog box opens, announcing "Download Complete" and when I Click the "Open Folder" button the "Download Complete" dialog box closes but the Target Folder doesn’t not open. First noticed this after SP3 in this XP Home environment.

Where’s the “Honor the 'Open Folder' button” setting to get this functionality back?
 

A:The "Download Complete" "Open Folder" button ignored

7 more replies
Answer Match 85.68%

I keep getting "Low disk space" messages about one of my partitions.

First of all, what is the point of this message? I can see why it would be useful for the system drive, but for all other drives why would anyone worry about filling up a drive?

More importantly, how can I disable this message from persistently popping up every day?

A:What are "Low disk space" messages for?

Hello Marty,

It's basically just a warning to let you know that the disk/partition is extremely low on free space. This is to warn you to either clear space or get a bigger storage device soon since you could lose data, possibly everything, on the hard drive if you run out of space on it.

The tutorial below can help show you how to disable the "Low disk space" message. Low Disk Space Warning in Vista
Hope this helps,
Shawn

9 more replies
Answer Match 85.68%

Hi everyone,

I've been having this prblem for several months but recently it has been getting worse. I'm working on an Dell Optiplex gx280 windows xp professional sp2. Here is the problem, while I'm working on my computer (doesn't matter what I'm doing) I will get an error msg "low disk space" flash on my screen, then my monitor will shut off, but the power light on the computer stays on (sometimes flashing). I'd have to power it off and turn it back on and it would log in normally. This morning it happened 3 times, please help. Thank you in advance.

-jdaries-
 

A:"low disk space" error

6 more replies
Answer Match 85.68%

I have a Compaq Presario with Windows XP Home Edition. I keep receiving the above message. How do I get rid of it? Yes, I know it means I don't have enough disk space on my D Drive, but how do I fix it? It won't defragment because it needs more space (I have only 45 mgs.) My D Drive is solely for Restore so I cannot delete files from there. Can I enlarge the D Drive?

Thanks, gb
 

A:"Low Disk Space D Drive"

16 more replies
Answer Match 85.68%

One of my users was working in Corel Word Perfect 9.0 and experience an "out of disk space" error when she tried to save her work (just a small document). She was working over our TCP/IP network using Win2000 terminal server and saving to a Linux file server. I was at the server so I was able to save the file with a different name but I can't figure why she would get that error as there is plenty of space on the Linux server. Has anyone ever seen this before? Thanks
 

A:"out of disk space" error

Just a wild guess but is there possibly a setting somewhere that may limit the amount of storage space a user can use, on a user by user basis? If so, you may just need to increase the setting for that user.
 

2 more replies
Answer Match 85.68%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 85.68%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 84.84%

I am running Windows 10 Pro. My system is running perfectly. There are zero "Event viewer" errors on every restart.
I have never had a BSOD and everything works perfectly.........but, on every other restart I am seeing "System error memory dump files" in the Disk Clean-up utility. The size varies. Currently it is 9.70mb but may change slightly if I reboot.
Whenever I clean it, it returns. There are no dump files in my Windows folder. I really don't understand why I am seeing it.
I have searched the internet for hours but all threads turn to BSOD issues. I have never had a BSOD, nor can I find this mysterious 9.70mb dump file. Can anyone shed any light onto what is happening?
Thanks in advance.

More replies
Answer Match 84.84%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Answer Match 84.84%

Hello, everyone. I'm new here and the only reason I was forced to access this forum is because of the multiple and continuous BSOD's i keep receiving. I upgraded my system and also upgraded to Windows 7 Ultimate (x64) from XP SP3 (x86). I did a clean install: formatted my 20GB partition and installed Win 7 (with both sticks of RAM installed). Installed available updates for Windows + all my necessary software. So far, so good. I don`t remember exactly when (the next day, I guess) I started receiving BSOD's. I tried multiple settings in BIOS: tried everything on Auto, tried increasing RAM voltage, tried setting the default XMP profile for my RAM... same results, same BSOD's: dumping phisycal memory to disk.

Tried a different approach: did another fresh install... same BSOD's. Then tried installing ONLY Windows updates (the important ones)... same BSOD's. So that rules out driver issues.

I have 0503 BIOS version and when I tried to update to the latest 0504 from AsusTek official website, I received an error: boot (something) doesn`t match, or something like that. Anyway, they state out what is fixed in the 0504 version and I don`t think that fix might help me.

Also, I used MemTest86+ v4.00 on each of my RAM sticks (separately) and everything is ok, my RAM is not the issue here.

I will attach the minidump files. Already looked over them with WhoCrashed and everytime ntoskrnl.exe is to blame.

Right now I have only one memory stick installed, so I come with the logical q... Read more

A:BSOD "dumping phisycal memory to disk" 4GB RAM issue ?!

Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

"0xC0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation occurred."


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [E:\Temp\Rar$DI07.984\110509-23540-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02815000 PsLoadedModuleList = 0xfffff800`02a52e50
Debug session time: Thu Nov 5 02:18:00.780 2009 (GMT-5)
System Uptime: 0 days 0:12:11.262
Loading Kernel Symbols
...............................................................
................................................................
............
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get deta... Read more

9 more replies
Answer Match 84.84%

Hi so system and compressed memory uses 100% disk space when i start my computer and continues to do so for 10 minutes at least and it will also do this randomly when i'm gaming or just on the internet. I've checked all of my drives to see if they were updated (I just clicked search online for newest update idk if that's the best way to do it) and i ran a virus scan in safe mode and did some other things like disable prefetch and windows search and i even disabled "show me tips for windows 10" So please help me out if any of you can!
 

More replies
Answer Match 84.42%

When I plug my memory stick into the computer, a new drive appears as you would expect it to, but when I try and open this drive, it acts as if its a disk drive without a disk in, meaning I can't attempt a reformat of the memory stick or anything :S

Does anyone have any ideas as to what I can do to make my memory stick usable?
 

A:"Please Insert Disk"... On a memory stick drive?

Try starting disk management to see if the flash drive is visible and whether or not it is partitioned and formatted. If so, should look like Disk 3 in the attached snapshot ... if not you may need to partition although these drives normally come preformatted.
 

9 more replies
Answer Match 84.42%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 83.58%

my friend has been getting this message for a while now

he occasionally gets it (just started getting it though)

his specs:
Intel 2.4Ghz
768mb ram
60gb hdd
fx5700 ultra

nothing overclocked or tampered with

any solutions?

the BSOD has a number to the right that keeps counting up (1,2,3,4,etc.)

edit: btw, is restarting the computer when this thing pops up bad?

A:"Dumping memory to disk" - BSOD

turn off the auto reboot and post the error message received in full

1 more replies
Answer Match 83.16%

The instruction at "0x7c9100c8" referenced memory at "0x02030010". The memory could not be read.
I thing, it?s problem with my graphycs card. I have 2 months old GeForce 8800 1Gb DDR2, and after instaling newer drivers and PhysX driver(which i after errer signature uninstaled) is imposible to start nearly any game, and if I want to open NVIDIA control panel, or something like that, this errer appears. I realy don?t know, what I have done bad with my PC. Please Help me!!!

A:The instruction at "0x7c9100c8" referenced memory at "0x02030010". The memory could n

Me too I have same problem
Someone give help us!!

1 more replies
Answer Match 83.16%

So i've been reading around and i have a similar problem that's come up before.

I've got tons of TMP files in My Documents and in Local Disk C.

When trying to delete them i get this response:
0x01d62739" referenced memory at "0x02354e50". The file could not be deleted.

any help???
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:45:40 PM, on 2/10/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\am9zZSB2YXJnYXM\command.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Network Monitor\netmon.exe
C:\Program Files\Dell\NICCONFIGSVC\NICCONFIGSVC.exe
C:\WINDOWS\system32\svchost.exe
c:\WINDOWS\system32\ZuneBusEnum.exe
c:\Program Files\Zune\ZuneNss.exe
C:\WINDOWS\system32\wbem\wmiprvse.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxsrvc.exe
C:\WINDOWS\system32\igfxper... Read more

A:0x01d62739" referenced memory at "0x02354e50". The memory could not be "read.

????
 

2 more replies
Answer Match 83.16%

the instruction at "0x00401082" referenced memory at "0x00000000". the memory could not be "written"

I got this message, now have started in safe mode under the last know successful boot, I ran Hijackthis and got the following, not sure what to do next

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:58:48 PM, on 3/20/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\ge security supra\syncservice.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Norton Internet Security\Norton Internet Security\Engine\16.0.0.125\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\GE Security Supra\ProxyDaemon.exe
C:\SSL\stunnel-4.10.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\eFax Messenger 4.3\J2GDllCmd.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\WINDOWS\system32\drivers\svchost.exe
C:\Program Files\GE Security Supra\SyncInfoApp.exe
C:\Program Files\eFax Messenger 4.3\J2GTray.exe
... Read more

More replies
Answer Match 83.16%

The instructions at "0x00402423" referenced memory at "0x000000074". The memory could not be "read".

I am receiving this error when I run nightly batches. a simple reboot makes the error go away but periodically the error will return.

I am running MS 2000 Server w/SP4. I dont believe this to be a memory issue.

Any suggestions would be helpful.

Alex
 

A:The instructions at "0x00402423" referenced memory at "0x000000074". The memory could

Google and get memtest and run it for atleast 7 passes, any errors and you need to replce your ram.
 

9 more replies
Answer Match 83.16%

Hi again everyone, whenever i want to play chess i get this error when i open chess server like pogo.com
The instruction at "0x7c901010" referenced memory at "0x0000001c". The memory could not be "read". click on ok to terminate the program
 

A:The instruction at "0x7c901010" referenced memory at "0x0000001c". The memory could n

7 more replies
Answer Match 83.16%

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

More replies
Answer Match 82.74%

Hello again. Must say most folks don't find me a "newbie" anymore. I seem to impress many with my "computer skills", but I have told them it is all TSG. I have learnt so much here. Now for todays problem.

I had to format (again!), tried to install Windows XP and it wouldn't do anything. So I reinstalled windows 98SE. Then I had the usual errors (for me), vredir.vxd, dfs.vxd, msnp32.dll, missing, blah, blah, blah,...well I got rid of those errors. Now the problem is when I go to the Network folder and it says "your network is not complete, do you want to continue".

I would like to correct this problem before tackling my next 2 projects; installing XP and installing my All in One Printer.

I have a DSL modem and ethernet card if that information is useful.

Thanks again for my increase in computer knowledge and for the ever flowing help.
PS. please keep the language simple, others may think i know what i am doing but i know better! tee hee hee
 

A:Solved: Message "your network is not complete"

16 more replies
Answer Match 82.74%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 82.74%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies