Tech Problem Aggregator

# Photostory-3 project file problem

Q: Photostory-3 project file problem

I recently tried to open a project file and I got the standard Microsoft error message "PS-3 has encountered a problem and must close...". I last used the project file in question almost two years ago with no noticeable problems. Any ideas on what I might try to salvage this file?

A: Photostory-3 project file problem

10 more replies

I use windows XP Packard Bell Imedia 1508 intel pentium with extra ram and memory modem aztech realtek 8139 network card
I have been usung Windows microsoft dig image 2006 together with photo story I have made dozens of dvd videos with it , and now for no apparent reason it will not let me save the project I have assimilated, it will build the video no problem but not save the project whioch now makes it impossible to use. Have tried reinstallation reg cleaner, system restore just about everything I can think of any ideas please? I am working on some urgent
phtostories which I need to complete. Each time the error message shuts down the programme.

A:Solved: Problem with Photostory 3.1 saving a project

What's the error message?
How much HD space do you have left?

1 more replies

I have a user that has been using Project 2003 for several years. He last used one particular file in November, and now when he tries to open it he gets this error message:Project cannot open the file--check that the file name & Path are correct--check that the file format is recognized by projectIt is a .mpp file, and was created with and had all modifications done with project 2003. The only thing that has changed in the last several months is an upgrade from Win 2000 to Win XP pro.I have tried opening this file on other computers and I get the same error message. I have done a new/fresh install on a computer - same problemI have repaired and also removed/reinstalled - same prblem...Help....

A:Microsoft Project 2003 says Project cannot open the file

I do not use MS Project software, Have you installed Service Pack 3 for Project?See here:https://www.microsoft.com/en-us/dow...This site might also be of assistance:http://project.mvps.org/faqs.htmThis is the thread where I found the above link:https://answers.microsoft.com/en-us...MIKEhttp://www.skeptic.com/message edited by mmcconaghy

3 more replies

Does anyone know how I can open a MS Project 2007 file in MS Project 2010. The file that was sent to me is .mpp and created in 2007 but I own 2010 and it says Project cannot open file.

A:Can't Open MS Project 2007 file in MS Project 2010

You will need to convert the file or it will be displayed in Compatibility Mode with reduced functionality. Then, you can resave the project as a 2010 format.

Opening Project MPP files from different versions

3 more replies

I am using the old version of microsoft photostory (3.1) which came with digital image suite, it has the facility to burn VCD's of the completed project, 2 years ago when my eldest son left primary school I created a lovely project for him and his classmates of their time at primary school. Now I am trying to do the same thing for my younger son however for some reason I am getting an error during the burn process.
I have transferred the story onto another (New) laptop and tried again but the same thing happened. I even created another very simple story using a few pictures and only one music track and that failed too.
I know there is a new version of photostory out that does not have the VCD feature - you can buy a plug in for $20 to make DVD's instead, unfortunately I am using an old laptop that has no DVD recorder and whilst I could use my sons new laptop I am concerned that there is something I have overlooked or another way around this-I would hate to have the same problem with the DVD plugin. Any advice would be appreciated. A:Photostory 3 Problem 7 more replies Answer Match 61.32% I am running PS3 on my Windows 7 pc and the only problem I have is when I save the story as an wmv file and play it in Windows Media Player. Sometimes a photo goes black for a few seconds in the middle of the movement (e.g. zooming). It used to do the same thing when I was running XP. Any advice please? More replies Answer Match 60.9% Hi there, I've got a mpp file from MS project 4, but project 2000 can't read it unless I convert the file to the mpx format. I don't have a version of Project 4 with me to do the conversion. How else can I read it? Cheers, Citifly More replies Answer Match 59.22% I have done several Photostories without any problems adding music from my computer. I just purchased some songs from Amazon .com (mp3's) and when I try to add the music it says I am "not choosing a valid music file".Another song that was purchased several months ago is working fine. What do I need to do? A:Problem downloading music files to Photostory Test with a different mp3 file. In any case, it's likely a DRM issue. The new files may have DRM and the old ones do not, or the new files have a different version that is not supported by that software. 1 more replies Answer Match 58.8% I use Windows system, and there is always mswmm file while using windows movie maker. Now I have found the result. First, Know the MSWMM File .MSWMM file is a Windows Movie Maker project file. By saving the project, it allows you to return to the movie and make modifications at a later time. However, if you're satisfied with the movie and would like to upload and share the result through YouTube, you will need to choose "Save Movie File" under the "File" menu (which is different from "Save Project", which creates the .MSWMM file). Solution I: Save and Play the MSWMM File You have to open the mswmm file in Windows Movie Maker and save the movie to your computer ( this step you should use Windows computer): Go Finish Movie > Save to my computer The 2 options for saving a video file from Movie Maker are either DV-AVI or WMV. To create a Mac-compatible video file, open the MSWMM file in Windows Movie Maker, save the movie at the highest quality setting WMV or preferably as a DV-AVI format file. Import this finished AVI or WMV file into iMovie or other Mac video editing application. After the MSWMM file saving as AVI or WMV file in our PC, you can play the WMV/AVI files on your PC and convert them to another video format or burn to DVD. Solution II: Edit and Burn MSWMM File to DVD on Mac Talk of burning to DVD, if you are using Mac, how should we do? First, make sure the MSWMM files had been saved as AVI or WMV format video on your PC, a... Read more More replies Answer Match 55.44% I have a user that has been using Project 2003 for several years. He last used one particular file in November, and now when he tries to open it he gets this error message: Project cannot open the file --check that the file name & Path are correct --check that the file format is recognized by project it is a .mpp file, and was created with and had all modifications done with project 2007. The only thing that has changed in the last several months is an upgrade from Win7 Ultimate to Win7 Prof. I have tried opening this file on other computers and I get the same error message. I have done a new/fresh install on a computer - same problem I have repaired and also removed/reinstalled - same problem. ...help.... A:Project 2007 says "Project cannot open the file" Try downloading and reinstalling the compatibility pack https://www.microsoft.com/downloads/...displaylang=en If that doesn?t work you may want to consider a third part PP recovery tool PowerPoint Recovery Toolbox: https://www.oemailrecovery.com/powerpoint_recovery.html As always, save a copy of the file as a backup before beginning procedures. As always, save a copy of the file as a backup before beginning procedures. See if the following article would help: https://support.microsoft.com/en-us/kb/933960 https://social.technet.microsoft.com...eitproprevious 2 more replies Answer Match 52.08% I created a project in audacity 1.2, then saved it twice under a different name in diffeent places to make sure I have a back up. Trouble is, I have the project file which has the audacity logo but when I open it it says that it cannot find the data file specified. That is because the data file has a different name. It's long story: question is how do I associate the data file, which has all the information with project file that is empty now. They cannot find each other as they have a different name. Any tricks? A:Audacity Project file and data file: how to associate them Just a guess, but try moving the backup of your project file to the same folder that the original was in and then renaming it to the name of the original. Also make sure that the data file is in its original folder with its original name. Slainte midders 2 more replies Answer Match 49.98% I have one of ms project 2003 files that was damaged by virus or malware, after this, it started to show: An unexpected problem occurred while opening the file. I opened it in another version of MS Project 2013, but the same error appeared. More replies Answer Match 49.98% I cannot install Photostory 3 each time I try I get message....Error 1325 DM content is not a valid short file name. Can you please help thank you A:photostory 3 6 more replies Answer Match 49.56% Hey guys, Anybody know how to open a *.mpp file? (I do not have Microsoft project) Thanks,$horty

A:Microsoft Project File

Just asked one of our project gurus for ya:

Bottom line is if you don't own Project, you're SOL. If you know someone who does have Project, they may be able to open the file and export it to Excel or text or some other format you *might* be able to read/understand.

Hope that helps, $horty. 2 more replies Answer Match 49.56% I just got .mpp file and have no tools to view it. I tried to install trial version of Microsoft Project but failed as I do not have administrative rights on my PC. Is there any way to view it with my limitations? A:How to view .mpp file without having MS Project If you need just open MS Project file, you do not need to install any software. Just go on AmiProject and open it in browser. That is it! 2 more replies Answer Match 49.56% If anyone on these forums is creating small freeware products and would like an ad free host then I would like to help. I am willing to provide hosting for a few select projects on my website using my own bandwidth because I believe that file hosting should be ad free. We currently host 2 projects in our community and would be happy hosting 3-4 more so if you would like a host then please email me with a short description of what your project is. You can view the project database here: http://www.dark-web.co.uk/forums/index.php?showforum=30 . My Email Is: [email protected] Moderators: If this post breaks the forum rules, I don't think it does, then please send me an email and I will remove this post. Remember I make no profit from hosting other peoples files. More replies Answer Match 49.56% Hi, How do i publish a *.mpp file to Project Server 2002 using MS Project Standard edition? thanks More replies Answer Match 49.56% I have a couple hundred old MS Projects that I made in 97-98. My new software (MS Project 2007) won't open them. How do I salvage all this work? A:Old MS Project File Convesion 12 more replies Answer Match 49.56% Hi I am trying to share a Microsoft Project file (.mpp), but I can't. I have all shareing options enabled correctly - I've share alot of files from my computer so I know how to do it, but when right-clicking & selecting Share With on this file, it just opens the Advanced Sharing options which is specific for all file sharing, not this particular file, & they are set correctly (network discovery on, etc., etc.). There is a lock on the file's icon, could that be the reason? I can't find any locking feature or other options to make it accessible. It's in my users/public/documents folder, & when selecting that folder from the remote computer, it shows everything in there but this file. Thanks in advance Brenda A:Can't share an MS Project file (.mpp) Have you tried taking ownership of the file? That should allow you to use the permission settings in order to share the file and get rid of the lock. Take Ownership Shortcut 3 more replies Answer Match 49.14% I am using XP and I have made many videos with Photostory 3 Now when I upload them to youtube the video does not assume the pictures that were customized for example http://youtu.be/UX7mzp33rag this is all right but now they appear so http://youtu.be/dOSaS_zTsnw anyone can help? what can I do? thanks for any help A:photostory 3 for windows Do you check private??? 2 more replies Answer Match 48.72% The original file was created in 2010 and saved in 2007 format - sent to me - I worked on it saved several times but when finally exited did not save. When reentered the file is blank however on properties shows it is still 655kb. A:Microsoft project 2007 file Any chance the .docx color is set to white? 1 more replies Answer Match 48.72% I recently changed computers. My old computer ran on XP and my new one on Windows 7. Prior to changing computers my macro that opened up an Excel file from a macro in Project worked fine. Now, however, I get a message box that says: "This action cannot be completed becasue the other application is busy..." Any suggestions? A:Opening Excel file from Project What version of Excel & Project did you have on your old computer, and what versions are they on your new computer? 2 more replies Answer Match 48.72% I want to know if it is possible to open a .mpp file without having MS project. I also do not want to install any 3rd party software free, trial or shareware for doing the same.Is it possible to open the .mpp file..is it possible to open it through safran planner?...Please help... A:Solved: Open .mpp file ....without having MS Project? Hi TP24, Try this web browser project viewer. http://www.projectviewercentral.com/ Cheers Hew 2 more replies Answer Match 48.72% I worked with mpp file for several months but suddenly on one day I can't open it.Error message:The file "X.mpp" cannot be opened.- Check that the file name and path are correct- Check that the file format is recognized by ProjectProject file saved in a version earlier than Microsoft Project 98 can't be opened.If your file is from earlier version, open it in that version, click save as (File menu), and save in MPX format. Open the MPX file in the current version of Project. When you use this method, project data is imported, but formatting is lost.My comments:- MS Project 2010 SP1- No major changes were made to the file (only operational). File was created in 2010- Other mpp file can be successfully opened except this- On other machine with 2010 it also can't be opened- On other machine with 2007 asks to upgrade in order to open the file- File name and path is correctPlease help! A:MS Project unable to open file Have you tried selecting the option to Open and Repair? Do you have a backup? 5 more replies Answer Match 48.72% hi, I think Ive installed the tweak tool that will let me stop the zoom feature and maybe set a universal time duration for each picture. But where is it ? if Ive got the tool I dont know where it is or how to get at it ! A:photostory 3 slide show starofwonder said: hi, I think Ive installed the tweak tool that will let me stop the zoom feature and maybe set a universal time duration for each picture. But where is it ? if Ive got the tool I dont know where it is or how to get at it !Click to expand... Um, just what are you on about Squire? What is this tool you have? Software? Hardware? A ten pound mallet? I'm afraid that if anybody here is going to be able to help you we must have more information. And any links to commercially available software will be instantly removed as will any forum members who posted them. Software you pay money for will almost certainly have it's own manual and FAQ which should help you out. Same rule for software also goes for warez btw. And welcome to the Forum, my star of wonder 6 more replies Answer Match 48.72% Is there any sign of a Windows 7 compatible Photostory 3? Is there a better alternative? A:Windows 7 compatible Photostory 3? I also have failed to install PS3 on W7 Ultimate RTM x64. Microsoft compatibility website claims compatibility with x32 and x64 of PS3. Is there an answer or an alternative? Highnoon 6 more replies Answer Match 48.72% Everytime I create a story with Photo Story 3, "Photo Story 3 for Windows has encountered a problem and needs to close" It also happens with Windows Movie Maker. Then I usually get another error "Dr Watson has encountered a problem and needs to close" This is really annoying me because it happens as soon as I either preview my video or save it. Causing it to do neither. Please help A:Photostory Continues To Crash How to read a Dr. Watson logfile:http://seer.support.veritas.comMark 1 more replies Answer Match 48.3% Can you recommend a good tool to open .mpp files created inh MS Project 2013? A:Open .mpp file created with MS Project 2013 Hi Vivian, there are many viewers out there that will help you do the trick: Seavus Project Viewer - seavusprojectviewer.com Moos Project Viewer - moosprojectviewer.com K-SOL - www.projectreader.com Steel Ray Project Viewer - www.steelray.com PS If you are looking for a free solution (although I wouldn't recommend it), you can find a list of freeware at: http://listoffreeware.com/list-of-best-free-mpp-viewer-software/ Hope this helps. Cheers! 2 more replies Answer Match 48.3% When attempting to open a .mpp file I receive this error message: “There was a problem opening this project last time, do you want to attempt a repair?” If I choose yes or no for the repair I still get the same result after, which is another message saying: “This action will cause a scheduling conflict. Task 266 of XXX with status upd…’has a task constraint or is linked to a task that cannot move, and as a result the constraint or the link cannot be set. You can, cancel or continue.” Does anyone know how I can go about recovering this file? A:Solved: Microsoft Project file error First of I will suggest you to open a new file in Project and then insert this existing file into the same. Because of the way Project stores files, file fragmentation may be the basic cause. To make sure this isn&#8217;t the problem: open your .mpp file then select File/Save immediately before doing any other action. Only if you save immediately after opening does Project defragment its .mpp file. If you do not have external links in your file, (i.e. resource pool, master with subprojects, etc.), then a good practice is to always use Save As instead of a straight Save with your file after editing. also check this link: https://groups.google.com/forum/?hl=en#!topic/mpp-recovery/cZI5mhYZ-ZA 1 more replies Answer Match 48.3% Here's what I'm looking for to organize my work. I want to keep a list of my to-do list and project ideas and for each item, I want to assign it more than one subject tag. For example: the note "sign timesheets" would be tagged as HR and Finance and if I was looking for my HR stuff, it would be there and if I was looking for my Finance stuff, it would there. Does this make sense? Can I do this in excel (i can use this) or access (very limited experience) or some kind of online app? thanks! A:Help making a database or project management file sfran7, welcome to the Forum. It can be done in either Excel or Access, but Access is better at "Relating" data the way that you want, as that is what it is designed for. I specialise in helping Posters create their databases and tailor them to fit their requirements, but also try and teach them Access basics at the same time. (See this Thread which I am currently working on - http://forums.techguy.org/business-applications/867163-learning-access.html) What I would need from you is some more Examples of what you want to put in and more importantly what you want to get out (as that will control what goes in ) I can only work in Access 97 - 2003, not 2007. 1 more replies Answer Match 48.3% Using WorldCast Version 3.1.48.253 We send out a newsletter every month though worldcast. It's a horrible program but it is all we got. Well now it wont open the project file that has all the emails in it. I am about to pull out what is left of my hair I need a way to crack into the worldcast project file so we can get the emails out and start using a different program. Any suggestions on that different program would be helpful More replies Answer Match 48.3% I've used Magix Xtreme photostory 8 to make several DVDs of photos. Now am getting an encoding error & cannot burn the current program. Magix has a forum but nobody responds to questions. Of several thousand queries, less than 100 have been responded to. Their customer support is nonexistent. Does anyone out there have experience with the company or the program? More replies Answer Match 48.3% I am using Windows Xp. I installed Photostory 3 after installing the required Windows Media Player 11. Made my Photostory perfectly fine till finished product. But the problem is that it doesn't work on a Mac and neither does it work on my Blackberry Curve. Can you please help me? A:Photostory 3 Videos not playing when sent via email to Mac from Win Xp Photostory creates videos in WMV format.(Windows Media Video) To view on a Mac, you need to install a program that will play WMV files. This will play them in Quicktime Player on a Mac:http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx Windows Media Video is supported in BlackBerry Device Software 4.2.1 and later. http://www.blackberryfaq.com/index.php/What_video_and_audio_formats_are_supported?? If you do a lot of movie making for different media players, you might want to purchase a program that gives a variety of output formats. Corel and Adobe both offer video editors from around$40-80. They offer many output formats.

Then there is the conversion route: http://www.videohelp.com/convert
This could be the more difficult route, but free if you have time and patience to research the different formats.
moper

1 more replies

Hi all
I have both Ultimate 64 and 32 on dual boot on my computer.

While I was exclusively on 64, I noticed that anything created with Photostory 3, and old stories in .wmv format were playing badly in WMP 11. The image was bouncy during all transitions, and the audio was sometimes of bad quality.

I thought that maybe it would just be the playback, but anything imported in Movie Maker and transformed to DVD kept that "bouncing around"...

Since then, I reformatted and did a clean install of both systems. On the 32 bit version I have no problems with playing, and creating Photo Stories. I have smooth playback. I can also import avi files in Movie Maker with no problems. I checked that right after the installation of Windows, and also after installation of all updated and new drivers.

On the 64 bit version, right off the bat after installation, I cannot have smooth playback of Photo Stories, but DVD playback is fine. I cannot import avi files in Movie Maker (only audio, black screen). Even after installation of all updates and updated drivers for everything, it does not get better.

So it may not be a driver issue, as with nothing else installed than Windows, it does not work properly at first login under 64, but does on 32.

The only thing in BIOS which I thought could do a difference was the HPET mode (32 or 64 bit) but that didn't do anything.

The videos are located on a NTFS partition (d: ) of the system hard drive (c: ).

I'm quite disappointed with vista x6... Read more

More replies

Hi, I am having a really strange issue, basically, since Thursday 2 users are struggling to open a project document correctly but one user is able to open the document correctly and use it fine. They are all running the same versions of office and patched equally. I have tried uninstalling, ccleaning and reinstalling project on one of the faulty machines but still having no luck at all. It is a really difficult situation to explain but basically the drop-down options aren't working for one column. Now it wouldn't be a problem to recreate the options, we tried this but after closing and opening the document a couple more times the problem returned on 2 of the 3 machines that use the file. I have tried restoring a couple of versions of the document, one from Thursday when it was working and also I tried as a test restoring the oldest version of the document in shadow copy but they both had the same problem. If anyone could help it would be most appreciated. I have also attached 2 screenshots to try and explain the situation a bit better.Best regards!

Solved!
View Solution.

A:Microsoft Project 2010 no longer opens the file

Also you may have a look into the MS Project Organizer, if you see something strange there. The organizer you can also use to copy content from one file to another.After option 2 and 3 you can check, if the problem still exists. This way you find out, if the global template is possibly corrupt or if the project file has a problem. In this case, you need a Microsoft Project service for online repair. I hope you can fix file on this service.https://onlinefilerepair.com/en/project-repair-online.html

5 more replies

Hello all, i know what i am asking might be too much but anyway..
I am volunteering at my school and my prof who is working on a project has assigned me to work on this webpage
http://www.miclimb.net/content/main.html

I am supposed to selectively copy text and save it in various files.
If u go to that link u will see 5 cources listed in the CONTENT OUTLINE, click on mathematics, then on strand 1.

now the text that comes up after clicking on strand 1 has to be copied and saved as a .htm file.
then expand STRAND 1 and click on CONTENT STANDARD 1 and again copy the text that shows up in the frame on the right. then REPEAT ACCORDINGLY BY CLICKING ON THE LINKS AS SHOWN BELOW.(this is what u will see if u expand in the link i provided)

Mathematics
Strand I
//Content Standard 1
////Elementary
//////Benchmark1
////////Assessment Example
////////Instructional Example.
////////Resources

//////Benchmark 2 (***here I only expanded BENCHMARK1 but all have to be****)
//////Benchmark 3
//////Benchmark 4
//////Benchmark 5

////Middle School(***i am supposed to click on each of these links copy the text and save it in a .htm file***)
Benchmark 1(again i did not expand everything, here but i have to click on each one copy and expand again and copy till i get to the examples)
Benchmark 2
Benchmark 3
Benchmark 4
Benchmark 5
High School
Benchmark 1
Benchmark 2
Benchmark 3
Benchmark 4
Benchmark 5
Content Standard 2
Elementary
Benchmark 1
Benchmark 2
Benchmark 3
Benchmark 4
Benchmark 5

More replies

I have a coworker who has a Project file he made in a previous version - I think it was 2003. He has opened and used this file in the current version (2010) almost daily for the last several months. Today, for some reason, he is getting an error saying the file cannot be opened and that files saved in a version earlier than project 98 can't be opened.
He can open all his other Project files, even others he created in v2003.

Any ideas? I have asked our I.T. dept to let me install a previous version on my test laptop so I can try to open it in v2003. But, they are hesitant and told me to see if I can figure out what is happening with the file first since today is the first time he has gotten the message.
So, I'm asking you if you have any ideas.
Thanks.

A:Solved: MS Project 2010 error opening file

only thing I've done in the past that works is to open it using open office or libre office, save it as a .pptx, and then re-open using the MS powerpoint app.

1 more replies

I have a user that has been using Project 2007 for several years. He last used one particular file in November, and now when he tries to open it he gets this error message:
Project cannot open the file
--check that the file name & Path are correct
--check that the file format is recognized by project

it is a .mpp file, and was created with and had all modifications done with project 2007. The only thing that has changed in the last several months is an upgrade from Win Vista to Win 7.

I have tried opening this file on other computers and I get the same error message.
I have done a new/fresh install on a computer - same problem
I have repaired and also removed/reinstalled - same problem

More replies

I exported a large (3,000 tasks) mpp to xml and when I attempt to open it with Project I get the error "An unexpected error occurred.The file may be damaged." I tried exporting it several times but get the same error each time. I don't see anything obvious in the xml, but it is huge and something could be lurking someplace that's not apparent.
Does anybody have any ideas?

A:Solved: Microsoft Project - error opening exported XML file

possible fix

2 more replies

MS Project Server files are saved in Project 2007 format .mpp and then re-opened in MS Project 2010. When the file is opened in MS Project 2010 the progream switches to compatibility mode but there are no tasks or project details - it is a blank schedule. I can open the same file in MS Project 2007 at home, but cannot open it at work on my laptop in MS Project 2010 (opens but is blank).

Any ideas what the issue might be? Belwo are my laptop details.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel Pentium III Xeon processor, x86 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3535 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1024 Mb
Hard Drives: C: Total - 76316 MB, Free - 26108 MB;
Motherboard: Dell Inc., 0W612R
Antivirus: VirusScan Enterprise + AntiSpyware Enterprise, Updated: Yes, On-Demand Scanner: Enabled

A:Cannot see Project 2007 files in Project 2010

http://www.mpug.com/Pages/MPUGForums.aspx?action=ViewPosts&fid=7&tid=709

1 more replies

I've had this problem ever since I got my new Video card.
I start up Project 64 (N64 Emulator) and It says this.

So I click OK, and Then this Pops up.

But, my video Card is like this:
---------------
Display Devices
---------------
Card name: VisionTek XTASY 9600
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_7C201545&REV_00
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6387 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 9/13/2003 00:43:24, 372736 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 9/13/2003 00:43:04, 611328 bytes
Device Identifier: {D7B71EE2-0210-11CF-066E-2A5CA1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x7C201545
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_Pi... Read more

A:Project 64 Problem

Just a bump. I hope someone can help me

2 more replies

Hi, im from Denmark so.. sorry for my horrible english.

First of all i need to provide you with some background information. what i am trying to do is, build a computer from scratch, using only secondhand trashed parts. in my town we have a recyceling site where people and companies trow away old computer systems and stuff. so me and a friend once a week go out and collect what we can.i finally collected enough parts that fit together. my problem is that when i put it all together, and install windows vista (i dont think the hardware supports windows 7, i might be wrong...) it worked some times (about half of the times i booted up it got through, i also had to try avout 10 time before i got the os installed corectly).i then proceded to install some motherboard and GPU drivers, i then restarted.

HERE IS MY PROBLEM:when i get to the login screen i get blue screen of death, and it says: "an error has been detected and windows has been shut down... bla bla" i have rebooted it 50 times, never always get to login screen, then it fails.

So i am trying to locate the problem, here is a list of the parts i have used:

antec true550P EPS12V PSU (almost 100% sure that there is nothing wrong with this part)

abit i-N73V motherboard (motherboard CPU and RAM all came from the same computer and was assembled when i found it

core 2 duo processor

3 GB kingston DDR2 800Mhz RAM

500GB hitachi Harddrive (there is nothing wrong with this harddrive)

A:Need help with a project problem

`Any errors in Memtest tells you the ram is bad are you running a single stick or multiple sticks?
If multiple have you tested the sticks one stick at a time?

5 more replies

After I upgraded my operating system to Windows 10, I have problems with my projection. If I project to second screen only then sound and video display well but if i should project either duplicate or extend then the sound or video will not work. This happens when I project wireless or through HDMI cable

More replies

I just used a very old MS Project template and worked over 5 hours of getting a plan in placed. The project saved fine under 2000 but I can not open it in 2000. Of course I do not have a copy of 98 on hand.

Does anywone know of a way to convert this to 2000 without 98?

More replies

When i try to open the edited Project file, the file opens, the the transitions are there, the clip size is correct but the clip image won't display. i think it has to do w/ the identification of the Project file directory but am not sure as most of the project file appears. M Leckey

More replies

I have to create programmes for large scale civil engineering projects. This is not a problem However, we find more and more clients require a cost breakdown. Costing is carried out by a different person, but from this I can get a TOTAL cost for excavation, fill, etc- all the actual costs for an item.
The question is, can I use this overall number to calculate the cost of each item, and thus generate a costing plan? I want to be ablt to give a value to excavation, and then have project divide this up between all the excavation items- so if I have 10 excavation items of different times (the time is related to volume and thus represents a quantity as well), is there a way to get this done automatically? Typically I have over 300 tasks, sometimes 4 or 5 000, and its way too much work to go in and try to edit it all once the estimators have a value.

Seems I can do this, but helps are not a lot of good, and slightly better than our IT- who seem to think if its not word, Excel or email, it doesnt deserve help.
thanks

A:MS Project- resources problem

2 more replies

Trying to install Project 2000. Don’t have enough room on the C drive so want to put it on the D Drive. Install program insists on putting it in the C Drive, but says there’s not enough room. In the destination directory, it says the directory in D I want it, yet it still says not enough space on the highlighted drive. (C) This can’t all be stuff going into the Windows system directory can it? I’ve still got over 130 meg on the C drive.

Have Project 98 on the C but can’t remove it because it insists on having the install disk in order to remove it. My 98 disk is in a storage shed because of some major remodeling we’re doing so can’t even free that space off the C drive. Suggestions?

A:MS Project install problem

If you want to remove Project 98 from your C drive - right click the folder and change the file name then try to delete it. This has worked for me in the past but your registry will still retain the Project 98 info which could cause some problems.

2 more replies

I recently installed Project 2000 on a laptop running Win98 2nd ed. The rest of the MS Office suite is also installed on this machine. When Project is run the user is able to open and work on projects and save them but when shutting the program down he gets an error message that WINPROJ has performed an illegal operation...specifically an "invalid page fault in module MSVBM60.DLL"

I'd appreciate any input on how to resolve this issue. I tried uninstalling and reinstalling the program to no avail. Thanks in advance.

More replies

Hi folks,

I'm using MS Project 2003, and I'm having a couple of difficulties with the relationship between the calendar view and the gantt chart:

The calendar is placing some tasks on non-working days;

When I set up my project in MS Project, I specified working days to run from 8 a.m. to 4:30 p.m., however, when I view the project report it sees working days as running from 8 a.m. to 5 p.m.. This suggests to me that, somehow, the gantt chart and task list are not wedded firmly to the calendar view. Can someone help?;

MS Project is displaying some distinct tasks as separate tasks along the same Gantt Chart bar. For example, tasks, x, y, and z occur on Monday, Tuesday and Wednesday every month, and they are displayed in the Gantt Chart on the same line of the same month running in direct s... Read more

A:MS Project Calendar Problem

11 more replies

All,

I am seeing some strange issues in the MPP file that I am working on.

I am working on a MPP, which has the following line items as attached in the .jpg file.

1) My problem is with the task name "Req analysis". I expected the end date to be 6/1 and I do not understand why Microsoft project calculates it as 6/5.

2)Sometimes, when I select the work as 16 hours, the duration is not getting calculated as 2 days. It is calculated as 2.28, as if I had a 7 hr/day. But I confirmed I had a standard calendar with 8 hrs/day only.

sometimes, I see the resource usage sheet, if I go and modify the 7 hours as 8 hours, it shows as if it is an overallocated task.

Can someone explain the reason for this behavior and help me fix this problem.

THanks a tonn for your help.

Regards,
Sri.

More replies

OK, so, I'm in Computer Science (IT) so I have an entire course on how to use Microsoft Project 2007. They make us buy a little how-to book. I'm following that book as an homework.

So here is the problem. From the Resource Sheet, I choose a resource. Then, I go to Tools -> Change Working Time. I then click on the tab "Work Week". Then, I create a new exception for the resource. Then, in the boxes next to it, in the drop boxes, there's calendar to set when it begins and where it ends, right? Each time that I want to set the end day, Microsoft Project 2007 crashes automatically. It happens sometimes on the start day too.

Anyone can help with that?

P.S Word, Access, Excel and PowerPoint are installed too, but in French. Project 2007 is in English.

EDIT

Ah... Project doesn't like it when we select Januray 1st to December 31st when we are January 10...

More replies

Hello,

I'm stuck can anyone help? I have to present a Microsoft Project document to a funding group on Monday, regarding a project that has not yet started. It needs to have a fixed cost to support our claim with resources correctly allocated and in line with the overall budget. I have MS Project 'step by step' book (2003) and this version on my windows XP laptop. Having searched programme and book to no avail, and with no real person to ask for help I was wondering if someone out there could tell me where abouts to look, or if it is even possible?

Cheers,

Heather

A:Microsoft Project costs problem

Go to the MS news groups. There are groups dedicated to different MS apps
http://www.microsoft.com/communities/newsgroups/default.mspx

It is easier to use Outlook Express as a news reader as the HTML one is kink or crappy to navigate.

1 more replies

I found this forum because of this thread: http://forums.techguy.org/software-development/845981-solved-c-code-block-help.html

I assume that we are in the same class. I went about the project in a different way using fgets() instead of scanf() since scanf() would only accept a single word.

My problem is that when I enter my menu selection in, it is passing the \n into the respective while loops. At least I think that is happening. I have spent the last 4 days trying to figure out what is going on here and since the project is due tonight I got desperate and decided to ask for help here (I hope this isn't considered cheating!)

Can anyone spot where I'm going wrong? This is my final project and I've already dumped at least 20 hours into it at this point, so I appreciate any help.

Here is my code so far:

Code:

#include <stdio.h>
#include <string.h>
#include <ctype.h>

int main (void)
{
int MAX = 80;
char choice;
char input[MAX];
char output[MAX];
printf("Enter the operation of your choice:\n");
printf("u. Convert to uppercase l. convert to lowercase\n");
printf("a. append string b. print backwards\n");
printf("c. compare strings\n");
printf("q. quit\n");

while ((choice = getchar()) != 'q')
{
switch (choice)
{
case 'u' :
{
printf("Enter a string:\n");

A:fgets() problem in a C Programming project

7 more replies

I downloaded and installed Photo Story 3. I have not yet been successful in saving a project. I get this message: "Some Photo Story program files may be corrupted. Reinstall Photo Story 3 for Windows and then edit and save your project again".

I have removed PS via the Control Panel, went back to Microsoft site and downloaded it again and reinstalled...several times. Get same message.

I did update the Windows Media Player from 9 to 11. My computer meets all the system requirements.

More replies

I have a form that, when loaded, I want the primary key to populate right away. But the field shows (New) until the record is written to. How can I write a new record as the form is loaded? - rr

A:Access Data Project (.adp) Primary Key problem

7 more replies

I have an appliation that I want to modify so I can send an email from the application. It is a Visual Studio 2008 Smart Device Project. I'm using .NET framework 3.5 In the application, when I try to import System.Net.Mail and can not get it. I can import System.Net but there is no .Mail option. If anyone can tell me how to do this it would really help.

More replies

Hello,

When I try to install Microsoft Project I have this error:

Data Execution Prevention - Microsoft Windows
Name: Windows installer
Manufacturer: Microsoft Corporation

and I can´t go with installation. Any idea where is a problem ?

Regards,

Emil

A:Solved: Problem with installing Microsoft Project - Windows installer

6 more replies

I have a user that is trying to save column widths and row heights. He can set everything how he wants it and save, but when he reopens it, though everything else is saved, the heights and widths are not saved.

Any ideas why this would happen?

Thanks!

A:MS Project Server Problem with saving column/row widths/heights

bump..........anyone?

1 more replies

I have a user that has been using Project 2003 for several years. He last used one particular file in November, and now when he tries to open it he gets this error message:
Project cannot open the file
--check that the file name & Path are correct
--check that the file format is recognized by project
It is a .mpp file, and was created with and had all modifications done with project 2003. The only thing that has changed in the last several months is an upgrade Win7 Ultimate to Win7 Prof.

I have tried opening this file on other computers and I get the same error message.
I have done a new/fresh install on a computer - same problem
I have repaired and also removed/reinstalled - same problem.

More replies

I have two laptops, and old one and a new one. Both are running Windows XP Professional and both have identical versions of Windows Movie Maker. The only difference I can think of is that one was upgraded to Windows XP Professional and the other came with it. I also have a Sony Digital 8 video camera.

I can capture & edit videos in the old computer, but that computer is not powerful enough to play them thru both its own screen and a projector at the same time. I work for a church and this is something we do frequently, so this is a necessary ability.

The church bought the new laptop to correct the projection problem. Now I can not capture the video correctly. I follow all the same steps and it appears to be going great. Then after it creates the clips, I go to play the clips so I can begin editing them and nothing happens. So, I end up creating the video in one laptop and then transferring the video to the other for the presentations.

I know there is the possibility that the problem is having a Sony camcorder, but I don't understand why creating the movie works in one computer and not the other. I've also looked into getting Sony software, but have had little luck in finding any info on it - the only thing I have seen is MovieShaker. According to the Sony Vaio people, that program may only work on a Sony computer.

I've been reading posts here and have seen some mention of Sony Vegas Movie Studio and am wondering if that will have the same proprietary... Read more

More replies

If anyone could help that would be amazing something very bad happened.]
I use windows 8.1 im using hypercam v2 and i was recording something very important worth 100\$ and i got scammed but for some reason when i try to open my video it says "Windows Media Player encountered a problem while playing the file."

Ive recorded 100s of times and this never happens so why is it saying this and please if anyone can help me fix this that would be a life saver!

feel free to ask more questions

A:Broken file! Windows Media Player encountered a problem while playing the file.

You could try playing it in VLC?

2 more replies

WMC recording/playback and media/file sharing seems to work fine until I go to copy a file between drives, where one of those drives is currently using some of its i/o bandwidth to do media. The copy hogs the i/o bandwidth, doing nasty things to the real-time needs.

How do I permanently tell Win7 x64 to do all [explorer] copies at a lower CPU and i/o (explorer.exe & system) priority and/or elevate WMC CPU & i/o (ehshell.exe?) and file/media sharing priorities a bit?

The PC is up to date on patches/drivers and should be able to prioritize obvious applications?

A:Problem with file copying adversely affecting media/file sharing & WMC

Right click on the process in Task Manager. There you can set the priority.

2 more replies

Problem Steps Recorder Error - You do not have the necessary file-system permissions to create the specified output file.

More replies

Hi all,win7 Home Premium 64 bit. I'm having difficulties modifying my hosts file. Following guidance from this forum, I open Notepad++ as administrator & can navigate to and open the hosts file. But the &quot;Save&quot; option is greyed out, so I can't save directly to the original location. I can Save As (eg to the Desktop), then copy paste into the original location.
This is actually part of a larger troubleshooting issue, in which the person helping has suggested changing the file permissions on the hosts file. I'm worried about doing that, as it seems quite a security risk. But the immediate question is, is the behavious of my hosts file unusual, or is that how Windows 7 is meant to work?</p>

A:Problem modifying hosts file, change file permissions?

Drag the file to your desktop, edit and save then drag it back. Done. This is how it should work, you want strong permissions on those directories and files to avoid malware from modifying them.

7 more replies

When I go to attach a file to an email, the "Insert File" dialog box pops up and the files inside are in reverse alphabetical order and the files are there but I have to scroll to the right to see the folders which are usually ahead of files. Does anyone have a suggestion as to how to cure that oddity?
thank you.

A:Attaching A File--file Order Problem: Backwards

Right click in the window that comes up and choose arrange icons->arrange by name

Does that fix it?
What mail program btw?

1 more replies

I am having a problem trying to open a CDR file that I think crashed. This is the 2nd time it has happened with different files.

The file still shows up in my external drive but has an icon next to it which it did not have before (a green pencil, like the icon in my program files for CorelDraw X3). When I click on it, it opens up in corel but as a blank page. Did I loose this file or can I some how recover it?

Thanks

A:Coreldraw X3 problem - CDR File crashed - lost file

Unless you have a saved copy you're probably dead in the water.... or if
you have another photo editing program that will open a CDR file you could try that
as a last resort.

I need to ask you why you saved it as a CDR file when you have other options such
as .tiff or even .jpg and what format did you initially have when you started work on it?

3 more replies

Hi all I'll try and keep this short. I have 3 computers, XBOX 360 and a Wii. Everything access the net just fine. The 2 desktop machines wireless XP SP 2 and hard wired Vista with a USB printer attatched to it. These 2 can see each other, exchange files and print just fine. They both can see the wireless laptop with XP SP 2 also but neither of them can access files on it!!. Here is the kicker....the laptop can see both the other computers and even access files from both!! So why can't the other 2 access the laptop? Also the XBOX can access both desktops but not the laptop but it too can see the laptop!!!! I been fooling with this for about 4 hours now and figured I better ask for help......HELP!!!!

A:Network file file and print sharing problem

9 more replies

When my first computer broke (few years ago) I didn't know enough about them to even consider fixing it.

I held onto it, thinking "someday I'd like to find out what's wrong".

Not sure I'm at that stage yet and I don't have anything to test with, but it's still sitting here, waiting for me to heal it.

It's a Pro-Tech, Pentium(1) 32 MB RAM (said at the time I got it "expandable to 128) with 3 gb hd. Actually it now has a 10 gb hd in someone once gave me, thinking that might have been the problem. But, putting in the (new) hd, didn't work.

I tried starting it with a bootup disk (not really knowing how to do it, but knew I put the floppy in and turned it on) and nothing happened.

The hd doesn't "load" (or whatever) Doesn't make the sounds where it comes to life and lights up the screen.

Though the lights come on the pc front. And the fans run.

I haven't tried it lately, but that's how I remember it. It reminds me of a t.v.- the older ones that had the high voltage tubes. Sometimes they'd go, and the t.v. would light up (low voltage) but not the high voltage that started the picture tube.

Anyway, for the last few months I was using it, it would sometimes (but not always) go off when it dialed up.

It would start, come on, I'd start the dial up, and just as it connected it would flash (yellow light) go off and restart.

Sometimes it would do this over and over till it finally co... Read more

A:Another possible project

13 more replies

i have made project on web designing in asp.net.i have attached the database to it. but i am running it ,it's showing an error.

<---error--->
Login failed for user 'ZENITH\Admin'. body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Lucida Console";font-size: .9em} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Source Error:

Line 29: Line 30: con = new SqlConnection(System.Configuration.ConfigurationSettings.AppSettings ["constr"]); Line 31: con.Open(); Line 32: cmd = new SqlCommand("Select * from puser_registration where uid='" + txtuser.Text + "&#... Read more

A:asp.net project

6 more replies

hi guys,
can anyone suggest me some good project using c++.
tried to search on the net but no luck.
could anyone suggest some sites where to look for?
thnx

A:C++ Project

_____________________________________________

+"C++" +"code" +"beginner"

exactly as shown (including the quotes).
That should get ya started.

Cheers, Mac

1 more replies

Everytime I start up my computer and log in to my user account an error message pops up that say "Can't load project XML" Does anyone know what that means and/or tell me how to make it go away?

A:Project XML

6 more replies

Hi all,

I've got a task from my teacher. We're working on an C#.NET application that makes it possible to send free SMS through a gateway. I found an information and a gateway on that page (ozekisms.com/index.php?owpn=315) that seems to be working for as the engine. Here a C#.NET SMS demo project is provided with full source code. Do you have any suggestions to my project? Any useful idea?

Many Thanks

Sam

A:help me in my C# project

What exactly are you looking for? It appears you have an assignment as well as a good API to use... Where do you need help?

3 more replies

I am getting Project 1 showing up in my applications. I also get a pop up that is a box that has a red circle with an x in it and an ok button. I try to close it and it just keeps coming back. Can some one look at the following log and give some suggestions. I have run spybot and adaware but I am still getting alot of pop ups

Thanks
Logfile of HijackThis v1.99.1
Scan saved at 10:48:36 PM, on 11/17/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.exe
C:\WINDOWS\services.exe
C:\Program Files\Yahoo!\browser\ybrwicon.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr_________.exe
C:\Program Files\Java\j2re1.4.2_06\bin\jusched.exe
C:\PROGRA~1\Yahoo!\browser\ycommon.exe
C:\Program Files\HP\HP Software Update\HPWuSchd.exe
C:\WINDOWS\AGRSMMSG.exe
C:\WINDOWS\System32\ezSP_Px.exe
C:\WINDOWS\System32\1es1ms9i.exe
C:\Program Files\Lfqhq\Ojvibdv.exe
C:\WINDOWS\System32\sdnzkfxpurl.exe
C:\WINDOWS\System32\a7abgd\zlip.exe
C:\WINDOWS\System32\nfomon\nfomon.exe
C:\WINDOWS\System32\vidmon\vidmon.exe
C:\WINDOWS\System32\MSED32.EXE
C:\Program Files\My Love\c4nn0t.exe

A:Project 1 etc

16 more replies

Ok i started making a login form in visual basic
what my final goal is to make the user once logged in when they select what they are booting like on my login will have a box with three options to select while loggin in when they select a option it boots a certin .exe (my program)

Yet i know c++ but no vb and i dont know how to link usernames and passwords to my ftp like a txt file on my ftp also
i dont know how to link login button to log user in and the box which they select things i dont know how to tell it once they click a certin one and login correct to boot any .exe specifyed for that option they selected
Any Help With My Project would be gratfull

I have project file here ready if anyone can help me let me know will send it them

i am also willing to pay or donate for help on my project
Many Thanks
SkunkNation

A:need help with my project

This smells of Homework and non-googleness. What say you guys?

3 more replies

Okay. So I have a desktop, and no matter the screen, there is a red tint over the picture and lines running from side to side. I know that I could just go out and buy a graphics card, but I am trying to fix the problem without buying a graphics card. I have no use for the computer other than to maybe find a cheap life hack sort of ordeal. Any suggestions?

Notes/ I have tried:

Different cords
Different screens
A graphics card(it worked, but as I said I wish to find another way)
Applying thermal paste to the gpu
When the computer is on the gpu does not get too hot
Installed new drivers
Installed different OS

A:Project GPU

Unless baking the card helps, I believe you have hit a brick wall.

3 more replies

Hello I am having problems with the base calendar. Everytime i enter the working times and the days people have off. I loose everything when i save and close the project file. The settings are still there when the project file is open but when i close and save it loses all the base calender settings.

Thankyou
djrock

More replies

Ok,

Here is the situation. My plant manager came to me with a MS Project file that wouldn't open in our MS Project 2002. I started looking into the file and it dates back to 1994. I think the version used to create this was Microsoft Project 4.x.(unsure this is just from research on the web). After reading you can't open these old of files with 98 or above. I was hoping someone may know a way to open this file just so we can view it and print it. Converting it to a newer file would be a plus but not needed. I hope I have provided enough information.

Thanks,

A:MS Project Help

Double check that their is not a converter for the older versions of Microsoft Project on Microsoft's website.

1 more replies

Hey guys,

I have someone that would like to put something from Project into a PowerPoint presentation. I am unfamiliar with Project, so bare with me. In pProject, they have text on the left with charts on the right. We are only able to select the text. How can we select the charts too, and just paste into PowerPoint? Is this even possible. If it matters, we are using Win98se.

Thanks,

p51

A:MS Project 2K

I'm not familiar with Projects either but have you tried to import or export the file into PP?

2 more replies

ok my problem is more like this; i don't know what project to pursue since i am not very well exposed to the resources that are available to some of you out there. So if there is someone who has any computer engineering project which they can help me with by giving me access the resources available to them, please get to me through my yahoo account [e-mail address removed by Cookiegal]. you will find me quite cooperative and an exiting project partner;
thank you

A:help for project

6 more replies

Hi folks

I'm developing a project in C++ and I want to get the best performance possible. My software code should be platform independent, so I can run it in any OS. My knowledge about hardware is almost "null", so I came here to ask a newbie question
Today, I am compiling the project only for 32 bit machines, forcing the OS of 64 bit machines to translate the compiled instructions.

My question is: This approach I've chosen (compile only in 32 bit) impacts the performance negatively if I run it in a 64 bit machine? Is so, would it be slower than a 32 bit machine (completely equivalent machine, but 32 bit), or it would have the same speed?

A:32-bit vs 64-bit for C++ project

I really know almost nothing about this, so fools rush in. A 64 bit computer is a 32 bit computer until something tells it it isn't. So, many programs are 32 bit and a 64 bit deals with them as such. To the best of my very limited knowledge, you don't actually have to "force" a 64 bit machine to deal with 32 bit software, it does that natively.

As to speed of execution a 32 bit program would have slower execution speed than a 64 bit, all other things being equal.

With that said, probably a more important consideration is to write code that is capable of taking full advantage of the current crop of hyper threading and multi-core CPUs.

I think that multi-threading in a 32 bit program, would likely exceed single thread performance @ 64 bit.

1 more replies

hi there..

i have a project which deals with image processing, that is, i have to use a webcamera for capturing an image to be processed...

i have a webcamera now but it's only 430K pixels..
and the image taken is very blurred that it's impossible to recognize an object..

my questions are:

* Does my videocard has something to do with the quality of the image i get in the webcam?

* and lastly how can i view the specs about my current videocard.. and i've heard that it could be built-in or slot thing(i forgot how to call it)..

A:For my project..

it has nothing to do with the graphics card, you just have a bad webcam

2 more replies

I'm fiddling with the idea of assembling a pc, I've personally never done it before but i'd like to try my hand at it. Looking to build something affordable but with an ok gaming performance. I'd love any input on hardware or hardware configurations, preferably considering relatively new hardware (mid 2009).

I've been looking at some motherboards, cpu's, cases, memory, etc., but I'm having some trouble. Any and all help are appreciated. Thnx

A:New project

9 more replies

When I try to run MS Project I am getting message that the file MSPROJ10.mpp can not be read. Is this real, or it is protection?

More replies

Noticed I had gotten Project 1 virus after homepage became a chinese site. Ran AVG and then that isolated Project 1. But chinese site kept returning as homepage. Then did a system restore and that fixed the homepage issue. Also before I did a system restore, Itunes kept popping up at startup up also until I did a system restore. Now itunes wont run--it says I need to reinstall.

I did all the steps suggested. I do have service pack 2,IE7, but cannot access windowsupdate page.

Log will be in next post.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:22:28 PM, on 9/27/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Yapta\YaptaClient.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Messenger\MSMSGS.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Common Files\DataViz\DvzIncMsgr.exe
C:\Program Files\Palm\Hotsync.exe

A:Project 1

Hello and welcome to TSF.

Apologies for the long delay in response. We have a large number of HijackThis logs to handle and it?s taking us longer to catch up. If you haven?t received help elsewhere already and still require assistance please perform the following:Download RSIT by random/random and save it to your desktop.
Double click RSIT.exe to start the tool and click Continue at the disclaimer.
When the scan completes it will open a log named log.txt maximized, and a log named info.txt minimized.
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of both here.

Please note that the forum is very busy and if I don?t hear from you in three days this thread will be closed.

2 more replies

I have to do a project for my computer literacy class, and it requires Windows XP. All that I have access to is Windows 7. Is there any way to get an interactive XP interface on my Windows 7 laptop?

A:help with project

If you have a spare copy of Windows XP and you can install virtual box and install it or upgrade to Windows 7 pro/ultimate and download the Windows XP Mode

9 more replies

I was given access to MS Project professional under the condition I wont use the software at work and that I will uninstall the software at the end of the semester. Will Microsoft know if I dont remove the application from my computer. It is the full version. Can I keep the software on my computer forever

A:MS Project

I was given access to MS Project professional under the condition I wont use the software at work and that I will uninstall the software at the end of the semester. Will Microsoft know if I dont remove the application from my computer. It is the full version. Can I keep the software on my computer forever

2 more replies

Tor Joins Movement Against Expanding Hacking Powers
messed up if you ask me

More replies

if anyone is willing to offer me advice i would appreciate it, its alot to read but just lookin for any help

Project Overview

A college administrator is planning a new campus and intends to build a network in the new facility that will provide students both high availability and ample bandwidth, but at the least cost.

The administrator realizes that he will need expert advice in designing the network, and has asked your instructor to recruit the best networking students to assist. Your instructor has decided to allow students to compete for the honor of designing the campus network.

You will utilize your knowledge of networking principles to plan and design the new campus network.

Your plan should include, but not be limited to the following issues:

* What type(s) of cable to use and where to use them.
* What LAN topology to use.
* What networking devices to install and where they will be installed.
* How to segment the network to achieve optimum performance.
* Provide an average bandwidth of 4 Mb per user.

Research Supplement

In order to recommend a design that is aligned with the real-world requirements and evidences a cost effective solution to business needs, prepare a report that lists the features and prices of equipment (hubs, switches, routers, etc.) that you have considered for your plan. Your plan should analyze these competing features and prices and offer justification for your recommendations of equipment.

A:got a project need help

Sorry, we cannot help w/ homework assignments/ projects.

This forum is for helping users with Microsoft Windows 7 or Vista issues.

Good Luck to you.

jcgriff2

.

1 more replies

DOES ANYONE KNOW IF YOU CAN EMAIL A PROJECT FILE TO A PERSON WHO DOES NOT HAVE PROJECT? AS A VIEWER OR SOMETIHNG?

THANKS

A:Project 98

Have been looking for a viewer for Project 98 and haven't been able to find one. Can you save the output in another format like word or HTML. If they onlt need to read it, it shouldn't make any difference.

1 more replies

hi ,

i have just finished my basic C course which includes pointers ,arrays, functions , structures , loops , basics function.

I m requried to make a project , and I have run out of ideas on wat to do , my class mates have done programs like factorial,prmie no. ,trigonmetric stuff , expontentinal , fibbonaccy series, matrices are all take, and i don't have any idea , so can u suggest me something within the scope of my knowledge on a good C project , i just need a idea on wat to do

A:I need a C project

try looking here for tons of ideas
http://acm.uva.es/problemset (click on one of the volumes, there are 1~8)
from the examples you said your friends did, I think any of these will do, but beware, some are much easier than others.

1 more replies

Logfile of HijackThis v1.99.1
Scan saved at 8:06:43 PM, on 1/21/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\pctspk.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common Files\AOL\1147668717\ee\AOLSoftware.exe
C:\PROGRA~1\COMMON~1\AOL\AOLSPY~1\AOLSP Scheduler.exe
C:\Program Files\Real\RealPlayer\RealPlay.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\system32\WgaTray.exe
C:\Program Files\Java\jre1.5.0_09\bin\jucheck.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YAHOOM~1.EXE
C:\Program Files\MySpace\IM\MySpaceIM.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YServer.exe
C:\Program Files\Netscape\Netscape\Netscp.exe
C:\Program Files\Internet Explorer\iexplore.exe

A:Ok, new project...Help...here's my log.

Logfile of HijackThis v1.99.1
Scan saved at 8:06:43 PM, on 1/21/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\pctspk.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common Files\AOL\1147668717\ee\AOLSoftware.exe
C:\PROGRA~1\COMMON~1\AOL\AOLSPY~1\AOLSP Scheduler.exe
C:\Program Files\Real\RealPlayer\RealPlay.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\system32\WgaTray.exe
C:\Program Files\Java\jre1.5.0_09\bin\jucheck.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YAHOOM~1.EXE
C:\Program Files\MySpace\IM\MySpaceIM.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YServer.exe
C:\Program Files\Netscape\Netscape\Netscp.exe
C:\Program Files\Internet Explorer\iexplore.exe