Tech Problem Aggregator

Games not working anymore

Q: Games not working anymore

My games used to work,haven't used them in a long time. Now when i load them they come up,
start to load,then the screen shuts off and
it goes back to my desktop.Tried reinstalling
them but had no change.One of them goes right
back to desktop when i click on it from start menu.
[email protected]

A: Games not working anymore

7 more replies
Answer Match 66.78%

I have a gateway with a tsstcorp dvd =_ rw mlti format double layer drive and very suddenly I can no longer watch movies. Games play, cds play, audio fine. But I put in a movie and it's like there's no disc here. We've watched movies on it for over a year, so I checked multiple movies that once worked. I've followed the troubleshooting, tried to update driver. The wizard could find no better driver than what is already being used. I DO NOT get an error message. I just don't get anything to show up either under My Computer or in Media Center or Media player. Oh, and if it helps we have Windows XP Media Center Edition. This stumps me. I read somewhere "Security Update for Windows Media Player 6.4 (KB925398)" was a problem but I even went to add/remove programs and couldn't find that paticular update, so I couldn't uninstall that.
Thanks for any help.
 

More replies
Answer Match 51.24%

Ok i posted a support post up for the network.
now i still did not get it to work. gateway told me to reinstall windows 98 so i did still i cant get on the net work but now my pc is worst now i can't run my diablo2 games it runs for like a few seconds it plays the blizzard entertainment into after that it goes back and there is no sounds then a error message comes up also star craft is the same way there is no sound and it laggs alot what happen and what can i do to repair this problem???
 

A:I can't get my games to run anymore

Did you reinstall your video and sound drivers, also would make sure your running the latest version of directx after the reinstall
 

2 more replies
Answer Match 51.24%

Goodevening,
Ive been having a lot of troubles with my Pc lately, around 2 days ago i got a blue screen saying Watchdog error along with my internet download speed going from 5mb/s to 700kb/s and the games where i usually get a average of 150+ frames i cant even get a steady 20. Ive tried updating all my drivers but got no luck.
Specs: Intel Core i7 6700K / 4.00GHz
Corsair Vengeance LPX 32GB 2666MHz DDR4
Nvidia GeForce GTX 1080
Asus PG279Q ROG Swift 27-inch 165Hz
Operating on Win 10

More replies
Answer Match 50.4%

Hello

After I ran registry mechanic and defragged my hard drive (perfect disk - thrice, although I stopped the defrag half way through), none of the latest games work anymore (Call of duty 4, Crysis demo, Bioshock), although older games like Heroes of might and magic 3 still runs fine. Whenever I click to start a game, the splash screen will start, the screen will go black like when one normally starts a game, and then I'm just back at the desktop, with no error message. All other software works fine, like Ableton Live 5 etc.

I should also say that before all of this I decided to clean up my hard drive and deleted some files mainly in C:\documents and settings\bernhard\local settings\temp. I did not delete any read-only files. Maybe this screwed it up?

It's strange because everything works fine except these games all of a sudden.

Any help would be greatly appreciated
 

A:XP games not starting up anymore

Make sure your video drivers are up to date.
 

2 more replies
Answer Match 50.4%

Guys you won't believe it.

I reinstalled Vista yesterday because of this issue and also my games.
Yesterday everything worked.
Today I installed my applications and extra drivers and I started Racedriver GRID and it did the same thing.
So since its a new Vista install I checked what I installed today and removed the Windows Visual C and my Genius Fpen 610 driver.
Reboot and magically Grid and all my games started.

My Genius F610 Tablet driver for Vista was causing all the trouble!!!!
Can you believe that?

Thanks for everyones help!
Cheers
 

More replies
Answer Match 50.4%

hi im trying to get rid of system integrity scan wizard and some other pop ups that are making my game drop down during online game play here is my log any help is appriciated



Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:53:43 PM, on 4/7/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16609)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Windows\RtHDVCpl.exe
C:\Windows\zHotkey.exe
C:\Windows\ModPS2Key.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Windows\System32\rundll32.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Windows\System32\rundll32.exe
C:\Windows\ehome\ehtray.exe
C:\Windows\ehome\ehmsas.exe
C:\Program Files\Linksys EasyLink Advisor\LinksysAgent.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktopIndex.exe
C:\Program Files\Nero\PhotoShow 5\data\Xtras\mssysmgr.exe
C:\Windows\System32\bebmlanu.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktopCrawl.exe
C:\Program Files\EMS Free Surfer Companion\fs30.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\PROGRA~1\Yahoo!\Companion\Installs... Read more

More replies
Answer Match 50.4%

None of my games work anymore, I either get a black screen, then am sent back to windows with no explanation or the games just don't run. These are all old games that I've played a long time ago and haven't touched for years and now when i try them they don't work! I've installed the latest version of directx and scanned my computer for viruses, but still no luck.

Thanks for any help!
 

A:games don' t work anymore

10 more replies
Answer Match 50.4%

About a few months ago I can still play games like Combat Arms, Call of Duty 4, BioShock, and Dead Space at minimal performance. But now, I reinstalled the game to play it again and it just got stuck on the Starting Screen or just plain BLACK Screen! I can still play some MMORPG like Sword of the New World: Granado Espada or the recently Closed-Beta, Luna Online just fine. I don't know what I did wrong with my Dell XPS Laptop. Any help will be apreciated.

My System Specs:
OS Name Microsoft? Windows Vista™ Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer Microsoft Corporation
System Manufacturer Dell Inc.
System Model XPS M1530
System Type X86-based PC
Processor Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz, 1667 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Dell Inc. A05, 11/17/2007
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume3
Locale United States
Hardware Abstraction Layer Version = "6.0.6001.18000"

A:I can't play my games anymore!?

The only thing I noticed with Vista and games is sometimes a game will load and you get to a black menu screen for the game. I play Silent Hunter 4 and the first time I loaded the game in Vista I had not issues at all. Me being me messed up how to handle admin account and user account so I did a clean install to start over. Once done I loaded Silent Hunter 4 again to play. No issues, loaded fine. I clicked to play and I got the load screen. Once I got to the menu of the game it was nothing but a black screen. I could hear the music and see my mouse cursor but nothing else. So, what I had to do was go to my videocard tweak program ( I just use the one offered by Nvidia, it works fine) and reset my video card to all the default values. Should be just a box to check and apply to reset to defaults. Once done, I ran the game and all was fine. I closed the game out and reset my videocard back up to the tweaks I like. My game ran fine every since. Give it a shot, it worked for me.

8 more replies
Answer Match 50.4%

I think I am in the right place but if this thread should be in another spot let me know.

I bought a computer a while ago and because it has a GeForce 7800 GS video card it sadly has the infinite loop problem. I managed to fix the Blue Screen of Death errors this problem causes when I downloaded the latest drivers for my card. I haven't had the crash problem since, but still have video rendering problems when I play some games like Battlefield 2 for instance what happens is the environment goes all screwy, I see a checkerboard type map on the ground or the image of the gun I am holding has odd triangle shapes coming off it or when I get into a vehicle the view is all triangles and flashing object or the other characters in the game look all sparkly and seem to be made up of odd triangle shapes. The only way to fix this is to reboot the system closing the game and starting it again doesn't work. Anywho the main reason I am here is because since I updated the video drivers ( I don't know what they were before or if this is the real reason for the problem) or because of something else other than the driver update, I can't say for sure as I didn't notice the problem right away because I didn't start the affected games for quite some time after the fact. I can still play COD4 but COD5, COD6, and Black Ops all fail to work and close down before they start COD6 actually stutters at the menu screen and I have to shut the system down by pulling the plug.... Read more

More replies
Answer Match 50.4%

Hey guys I have AT&T "High-Speed" Internet DSL. I used to be able to host games and such when I was directly connected to the modem and nobody would lagg, and I would never lagg in games. Anyways, now I bought a linksys wrt54gl because I needed internet for myself and other people here at home. Well I tried the best I could, and I can join games (I play Borderlands and CS:Source and Team Fortress 2) but I can't host. When I host, my friends can't join, they used to be able to join me with no lagg... now they can't even join me.

I've tried port forwarding, disabling DMZ, removing the router firewall, tons of stuff. I can't get it to work, and I need to be able to host games again because I have the fastest internet.

Please help me out, I'm a newcomer and not too Tech Savvy but I'm not stupid either.

Thanks guys at Tech Support Guy Forums,
Andy
 

A:Can't host games anymore, help?!!

just for troubleshooting, put your computer in the DMZ (must have manual IP address). What the DMZ will do is route any traffic to that computer without any issues/port blocks etc.
 

1 more replies
Answer Match 50.4%

recently i have not been able to play resident evil 5 or dead space on my computer. the games ran fine for a long time, but not when i double click the icon nothing happens. i have have tried reinstalling the games multiple time and updating direct x and video driver, nothing seems to work. although splinter cell: conviction seem to work fine. any ideas?

im running Windows XP pro service pack 3; Nvidia 8800GT; 1GB ram
 

A:Games won't start anymore!!!

14 more replies
Answer Match 50.4%

Hi I'm after a little help I cant run my older games anymore
I think it might be to do with the video card not sure
the games i cannot run are Delta force 2 and land warrior, hitman original, and an oldy called Driver, wont load with video memory errors
my system specs are below and ill attach my dxdiag
any advice appreciated in advance
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name TEST
System Manufacturer System manufacturer
System Model System Product Name
System Type X86-based PC
Processor x86 Family 15 Model 44 Stepping 2 AuthenticAMD ~1800 Mhz
BIOS Version/Date American Megatrends Inc. 0204, 14/10/2005
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
User Name TEST\Mark
Time Zone AUS Eastern Standard Time
Total Physical Memory 512.00 MB
Available Physical Memory 136.45 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.95 GB
Page File Space 1.12 GB
Page File C:\pagefile.sys
 

A:Can't run older games anymore

When you say older games don't work does that mean they did work on that PC before or not?
 

3 more replies
Answer Match 50.4%

Hey guys,

Recently my graphics card wont run anygames anymore.It loads
the main menu of a game but when its finished loading a map or mission the computer crashes and a the screen was messed up and a error came up saying that the driver couldnt load normaly and restarts. It was working fine a few hours ago with all the latest drivers. Ive reinstalled the drivers and swaped it with another graphics card. By the way its a geforce fx 5900 agp. Any help apreciated
 

A:Cant play games anymore

Is the GFX fan spinning normally? Check your GPU temps.
 

2 more replies
Answer Match 49.98%

Hi,Im new here.Heres whats been going on.I just bought some games over the weekend.The games are Airline Tycoon and Crazy Taxi Driver.I keep getting this error message that says "interface not registered".So it wont even let me install them.What can I do to install them?

I also bought Flight Simulator 2002 with the add ons that go to that game and now the add ons are saying "interface not registered".What can I do?

Any advice is very appreciated.

nattalie
 

A:most of my games dont work anymore

What version of windows are you using? Also are there any numbers or other parts of the error message?
 

3 more replies
Answer Match 49.98%

Why doesnt my steam or gamespy work anymore. It says that it cannot connect b/c my internet is unstable or i am connected through a over protected firewall, and it has been doing this for about a month now. I went to the steam website and did everything they told me to and it still doesnt work....what should i do?
 

A:None of my online games work anymore

well make sure your are not in fact blocked by a firewall or anything, unless your 100% sure. make sure your internet connection is set under the right setting appropriate for you under Settings>Internet tab for Steam.
 

1 more replies
Answer Match 49.98%

I've already asked this on two other forums, no one can give me a straight answer...here goes:

Whenever I play a game for more than 10 minutes, it locks up and I have to reboot my PC. Even after I reboot, it still occurs every single time. Also, if I want my games to run smooth, I have to run them as soon as I boot up the PC or else the frame rate goes to hell. I have all the latest drivers for my vid/sound card and XP. Defragged around 2 days ago.

The 2nd problem happened long before the first but I didn't think much of it...

I really have no clue what's wrong. Any ideas?

My specs:

AMD Athlon 2100+
512mb RAM
60gig HD
Radeon 9000 Pro 128mb
Sound Blaster Audigy
Windows XP

Thanks.
 

A:PC games don't work anymore....desperate for help!

6 more replies
Answer Match 49.98%

i use to get all my poker sites, full tilt, pokerstars etc. now when i try to get them i get the cannot cnnect to server message. i try disabling my firewall (windows firewall) nothing, i try to uninstall my games nothing. PLEASE HELP...
 

More replies
Answer Match 49.98%

about 3 days ago, i was just on the computer. I went on the internet, tried downloading adobe after affects, and played minecraft. after awhile i got bored so i turned off my computer. When i decided to go back on later, i couldnt play my only 2 computer games which are wizard101 and minecraft. Internet, videos and other programs work just fine. Its just wiz101 and minecraft.
 
When trying to open wizard 101 i get 3 errors (see attached file). After all those messages go away i can type in my username and password to start the game, but it just tells me i am unable to connect to wizard101.
 
For minecraft, i have 2 different minecrafts installed. One of the minecrafts let me enter my password and username and begin playing the game, but after that the minecraft window just goes black and stays like that. When trying to play the OTher minecraft i get this error -
Java Virtual Machine Launcher 
Error: Invalid or corrupt jarfile C:\Documents And Settings\Victoria\Desktop\Mineshafter-proxy.jar
 
ive tried uninstalling and then re-installing minecraft, thats all. It did not work though. I havent tried anything else yet. I have a windows Xp. If you need anymore info on my computer or need me to be more clear about some things, please let me know. Thank you.

A:I cant play certain games on my computer anymore?

Required reading :  http://pcsupport.about.com/od/findbyerrormessage/a/dciman32-dll-not-found-missing-error.htm .
 
Me, I would try running the sfc /scannow command, to repair/replace damaged system files.
 
How To Use SFC Scannow to Repair Windows System Files - http://pcsupport.about.com/od/toolsofthetrade/ht/sfc-scannow.htm
 
Louis
 
 

3 more replies
Answer Match 49.98%

I hope someone has an answer to my dilemma. I like to play games online, especially at Yahoo.com and Pogo.com, but since yesterday I haven't been able to play any of the games. The games don't load for me anymore.

I have disabled the firewall and the pop-up stopper to see if it would help, but it didn't. I don't know what else to do. I am sure I am missing some files, but don't have a clue to which ones are missing.

Any help is greatly appreciated....

By the way my computer has windows 98SE.

Thank you in advance!
 

A:Oneline games don't load anymore...

Problem fixed. I did a system restore and now I am good again.
 

1 more replies
Answer Match 49.98%

At least 2 old games gothic 1 and gothic 2 ( raven ). Both played well on my winXP 64-bit. I reinstalled them both. Gothic 1 has no images in intro, and the sound is very spotty. Gothic 2 also has no intro images and even stopped in the middle of intro.

It is the same computer, except some more games. The computer is virtually not connected to internet except when I need a patch. What could be the reason?

one year old gaming computer
winXP pro 64-bit service pack 2
AMD phenom II X4 955
3.21 ghz 8 gig RAM
radeon HD 4870 X2 2gig video RAM
BTW, the DVDs come from " gothic universal " which includes 3 DVDs ( No1 is gothic 1, No2 is gothic 2 and No3 is gothic 3 ). No3 which is gothic 3 works fine so I have no reason to think that the other two DVDs do not work because they are dusty or scratched. Most other games played well including both old and recent games.
 

A:games that don't play anymore on same computer?

are you saying they were working on the same computer and stopped working after you reinstall them? why did you reinstall them?
 

2 more replies
Answer Match 49.56%

Hi, I have a computer with hardware capable of running almost all current titles, EG Bf3, Dota2, counter strike GO, that was until a few months ago.
I started experiencing serious ping issues / packet loss in games causing me to completely freeze, then re-appear where I would have been. On counter strike source "string_cmds" graph peaks when this occurs.
The problem has got worse now, though, I can't play more then 10 minutes of ANY game before something goes wrong, be it a game crash or my whole computer shuts down resulting in one of the many Blue screen Stop errors I have said.
The game will run perfectly smooth, then suddenly my whole computer will shut down. This can happen about 5 times a day depending on how willing I am to restart the game.
Google chrome has just started to crash frequently now, too, and with limited income being 16 I need to fix this rather buy a new pc.
I don't know whether this will be useful but the address for one of them ( I've had well over 100 by now) Is "at FFFFF8801047D000" and another.." STOP: 0x00000019"

Operating System
MS Windows 7 Home Premium 64-bit
CPU
Intel Core i3 550 @ 3.20GHz 47 ?C
Clarkdale 32nm Technology
RAM
4.00 GB Single-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
Acer Aspire M3910 (CPU 1) 30 ?C
Graphics
HP S2031 (1600x900@60Hz)
AMD Radeon HD 5670 (Sapphire/PCPartner) 48 ?C
Hard Drives
625GB Western Digital WDC WD6400AAKS-22A7B SCSI Disk Device (SATA) 44 ?C
Optical Drives
HL-DT-ST DV... Read more

A:Multiple BSODs - 3B, 7e, 10, 50, can't play games anymore

Welcome to SevenForums,

I have had a look at your last 3 DMP Files, 2 of them are referencing memory.

Can you try these steps for me

Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+If there is no error, enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable


   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip
If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

9 more replies
Answer Match 49.56%

Mothers computer, all she does is play solitaire and bridge games on it.
as of this morning none of the standard windows 7 games or even games explorer will open.
I have un enabled and the re enabled the games through features control. no help
System file checker and scandsk no help
system restore says error XXX8000ffff (not exact error) and doesn't restore anything
Games wont open from the exe in program files either.
Win 7 ultimate x64

Any Ideas?
Thanks

More replies
Answer Match 49.56%

Ok here we go, i got my laptop last year and i got a virus about 6 months ago. I had my laptop reset completely to factory settings. Before i got the virus and reset i could play: sims 3,democracy,fifa,call of duty, downloaded 3d games. Now i cant play any games hardly the screen goes black and it has an error on every single one then it says windows has stopped working

Info

Device:

name: SiS mirage 3 graphics
manufacturer: Silicon intergrated systems corp.
chip type: SiS672 series
DAC type: internal
Approx memory: 184mb
display mode: 1366 x 768 (32 bit) (60hz)
monitor: Generic Pnp monitor

Directx features:

directdraw: enabled
direct3d: enabled

Drivers:

Main driver: SISGRUMD.dll,SiSclone.dll,SiSfunc.dl
version: 8.14.0010.518 (english)
Date: 30/06/2010
WHQL logo'd: Yes
DDI version: 9Ex

please help me thanks i want to be able to play all the games i could before.
 

A:My laptop wont play games anymore

We need the model number and make of your laptop, as well as full system specs to help.
Although I can say right now, your integrated graphics sucks.
 

2 more replies
Answer Match 49.56%

I decided to install the game Grid but the installer will not run because it says that its not compatible with the windows version im running.. But 5 months ago i installed it with no problems. That happened with some other games i installed.. i have the same windows version on my desktop and there i never had any problem instaling just on my laptop.. I have vista home premium 64bit.
I already tried to go to the setup and run it in compability mode but still doesnt work..
What should i do? How come i use to be able to instal and now im not?

A:vista wont install some games anymore..

I have had the ability to play older games. I speculate that after installing SP2 on the x64 you lose the ability to install/play older x86 games. I cant play my MechWarrior 4 anymore and it has me annoyed. I also assume at times...even though sounds stupid..that newer hardware is just too high end for older games that they cant be installed on them. I know its silly but possible. Just keep trying in compatibility mold all the way back to windows 2000/xp settings and try it out more. It might just work if it feels like it.

1 more replies
Answer Match 49.14%

I received this error after trying to play europa universalis 4, after updating with the latest windows 8.1 updates. Yesterday all games worked fine, today, none of them run at all.

I've been searching for a solution but all i can find is update your graphics card / DirectX / install the Dx in the game folder itself, all of which i did, but none of it worked.


I've tried pretty much everything i could find about this problem, anyone have any ideas? Only difference is i am running all of this off a laptop with an intergrated graphics card though, and for the next few months my laptop is all i have in terms of a pc. Graphics card is Intel HD graphics 4600, which worked just fine a day ago.

A:Failed to create graphics device. Can't run games anymore

Welcome to the forum!

You are certain you have only HD 4600 graphics and not also a discrete Nvidia graphics chip? Does device manager show only HD 4600 graphics adapter?

Would also help to know exact model like V3-772-xxxx.

1 more replies
Answer Match 49.14%

I have Win XP with a gig of ram and a nividia geforce 5500fx video card, i used to play battlefield 2 and 2142 with little lag, now my system is slow slow i can't play ANY games, single or multiplayer. Its fine until you get into the acutal gameplay. Several of my process are above 50,000k.
svhost.exe is at 59,0000 right now and comes back if i end it. Here is my hijackthis logfile:
-------------------------------------------------------------------
Logfile of HijackThis v1.99.1
Scan saved at 12:56:31 PM, on 2/12/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcp

roxy.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\McAfee.com\Agent\mcagent.exe
C:\Program

Files\Java\jre1.6.0_01\bin\jusched.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\Common

Files\Real\Update_OB\realsched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\WINDOWS\system32\svchost.exe
c:\WINDOWS\system32\ZuneBusEnum.exe
C:\Program Files\Avira\AntiVir PersonalEdition

Classic\avguard.exe
C:\Program Files\Avira\AntiVir PersonalEdition

Classic\sched.exe
C:\WINDOWS\System32\svchost.exe
C:\Program

Files\SiteAdvisor\6253\SAService.exe ... Read more

A:Help Computer suddenly very Slow - can't play games anymore

please someone help asap i suspect a virus, even tho i've done tons of scans with several programs

1 more replies
Answer Match 47.88%

I got back from christmas break, (hadn't used my computer for about 2 weeks) and my computer was running incredibly slowly on the internet ( i have cox high speed) and when I tried to uninstall and reinstall a few games, they wouldn't uninstall, and i couldn't use them. I think i installed a corrupted rollercoaster tycoon disc, and that messed up my computer.
I've run Norton internet security (05), ad aware, stinger, and tried my cox security, but norton keeps interfering with that. here is my log.


Logfile of HijackThis v1.99.1
Scan saved at 9:45:18 PM, on 1/7/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton Internet Security\ISSVC.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\co... Read more

A:slowed computer, games uninstall/install doesn't work anymore.

Welcome to TSF.

You're infected with a trojan...TWICE!.

There is a procedure for removing the duplicate infection in one go, but I can't remember. So, we are going to run the tool twice instead.
Please print these instructions out for use in Safe Mode. Or Save them to Wordpad so that you can access them in Safe Mode.

Please download VundoFix.exe to your desktop.Double-click VundoFix.exe to extract the files
This will create a VundoFix folder on your desktop.
Go into Add/Remove and uninstall:

Viewpoint Media Player

Delete the folder:

C:\Program Files\Viewpoint
Restart the computer. The computer begins processing a set of instructions known as BIOS.
As soon as the BIOS has finished loading, begin tapping the F8 key on your keyboard.
Continue to do so until the 'Windows Advanced Options' menu appears.
Using the arrow keys on the keyboard, scroll to and select the menu item - Safe Mode.

Once in safe mode open the VundoFix folder and doubleclick on KillVundo.bat
You will first be presented with a warning.
It should look like this

Quote:




VundoFix V2.15 by Atri
By using VundoFix you agree that you are doing so at your own risk
Press enter to continue....





Press 'Enter' to continue!
Next you will see:

Quote:




Please Type in the filepath as instructed by the forum staff
and then press enter:





At this point please type the following file path (make sure to enter it exactly as below!):C:\WINDOWS\... Read more

12 more replies
Answer Match 46.62%

I have
AMD ATHLON 64 4000+
ATI Sapphire Radeon X800 XL Hybrid (512 mb)
1 gb kingston ddr 400 ram
160 gb SATA Harddrive (Western Digital)
Asus A8N SLI Deluxe Motherboard
560 Watt Power supply
Windows XP Professional 64 bit-edition
7 different high power fans that keeps the computer cool

When I play doom 3, Half-life 2, F.E.A.R. or any other game utilising directx 9.0b and higher, the game crashes when I put all the settings to high. The weird thing is that it used to work just fine. Now, when games crash, it usually shows the whole entire screen, filling up with flickering blue squares. The sound keeps going on for about 10 more seconds, and then the sound freezes up too. When I press any button after this happens, The monitor flickers and then shows a screen that is bizarrely coloured. I am using Windows XP Professional 64 bit-edition
 

A:Help! All high-end games are not working! (moved from Games forum)

9 more replies
Answer Match 46.2%

Hello , I have a problem whit my notebook , Windows was not working properly so did I the Recovery Manager , ther was somthing not right , I got message "Restore incomplete" , I still only reserved this message I dont come back into the system . When HP System Recovery DVD used than this does not work also , get notified : "this computer is not supported by the System Recovery Media, You will not be able to continue to recover this system with these Media . Error: 0130-ABA-ABH" . What can I do to fix my computer ?

More replies
Answer Match 46.2%

While trying to clean up the drive of my Dell Inspiron 6400, I must have accidentally uninstalled something. Now my DVD player does not play DVD anymore.
When I go to ?My Computer?and then click on the DVD, I get an error message saying ?This file does not have a program associated with it to perform this action.? The DVD does neither play on DIVX nor on Windows Media Player.
I have checked under ?Device Manager? to see if there was a problem with the DVD driver, but it seems fine. There is no exclamation sign. I even uninstalled the driver and rebooted the computer. It still did not solve the problem.

Can anyone please give me a solution? It is getting quite frustrating.

Thank You in advance.
Prad

A:DVD/CD not working anymore

Download VLC player and play your DVD's with it.

7 more replies
Answer Match 46.2%

Hi

I have a Toshiba L70-B 12z.
Couple of months ago I did experience some problems while gaming (it did crash a lot).
I brought it by the shop who sent it back to toshiba to repair.
They replaced the motherboard because apparently 2 of the 4 cpu's where broken.

When I did get it back I found out my internal speakers weren't working anymore. So I sent it back ones more.
This time, the 2 internal speakers weren broken (how, I don't get) and also replaced. Mind you, it is a 1,5 year old notebook.

When I got it back this time, DTS sound was not functional anymore.
I get the error 'Failed to find apo endpoint'.
I did try to uninstall DTS en re?nstall, but when tries to re?nstall I would get the error 'This product does not support DTS-processing'.
I tried various DTS drivers (older and newest) without succes.

It's very frustrating, since before '**** started hitting the fan' everything worked perfectly fine. DTS sound was working perfectly, and I really liked the sound. I also tried a lot of internet solutions. Re?nstalling windows 10, going back to windows 8.1 (since my laptop originally came with windows 8.1), uninstall, re?nstall and updating sound drivers (from realtek), install the audio enhancement driver, updating BIOS via servicestation, all the recommended drivers for my laptop, all the windows updates. Nothing works.

I really don't know what I can do more for making DTS work again.
I hope someone here can help me.

More replies
Answer Match 46.2%

Good morning.

When i turn on the PC, the restore tool start to run and it never ends!!!

The message is: restore tool i running. During the process the PC could be restarted several times!!!

Any one could help me?

Thank you in advance!

More replies
Answer Match 46.2%

I recently uninstalled a bunch of unused programs from my Win XP and I may have done something wrong. Now the DVD does not play anymore and I get the error message "The file does not have a program assocaited with it to perform this action."
Please Help

More replies
Answer Match 45.78%

here is the detail about my laptop hp g42-388tx
windows 7 home premium 64 bit
my webcam hp webcam-101(internal webcam)
here's the problem when i want to use my webcam it always says cannot connect to your webcam,try selecting another capture device within settings, or close any applications that may be using this webcam
 

A:hi please help me my webcam does not working anymore

To help us help you,please use the TSG System Info tool to let Tech's know the specs of your computer: http://static.techguy.org/download/SysInfo.exe Copy and paste the results here in your thread. You can use the TSG Info to fill in your computer information in your user profile as well.
 

3 more replies
Answer Match 45.78%

Greetings to all, I have been running win 8.1 for a while. At first Bluetooth was working fine. Then last week Bluetooth stopped working. Why, I have got a clue. What I did is just reinstall the drivers from ASUS web site but to no avail. I have looked at 'Event Viewer' but there is no error message pertaining to Bluetooth. In 'Services' Bluetooth is running. I am stumped as far was why my phone that used to connect via Bluetooth to my rig is does not connect anymore. Most of all, I do not know where to look next to solve the issue. My rig has been acting funny recently in many other ways; ie, windows update tells me updates are there to be installed by the update page in 'windows update' is blank. May be different issue than the Bluetooth but I think all related for some reasons. I don't pretend to know anything about IT but would surely appreciate some help PS: I have loads of DCOM errors which I have mentioned in previous post. I have read all I can about DCOM but still can't understand what it is use for and how I can solve issue pertaining to DCOM. zongo saiba

More replies
Answer Match 45.78%

Hi there, brand new user on here but I have been browsing for awhile

I had an issue a few months ago that turned out to be having 2 different antivirus programs on my computer at the same time that kept causing Blue Screens. Nothing's been the same since then. Today I was just trying to get her running better and ran Verifier.exe and luckily the computer's up and running fine still, but I have absolutely no sound now. And the dummy that I am didn't write down exactly the steps I took while using Verifier.exe. I have an HP s5-1060 w/ 6 GB of RAM and an intel Core i5 @2.90 GHz

The thing is that the PC's saying it's working completely fine, no warning or error signs in device manager, the troubleshooter reports nothing wrong. But when i click on the little sound icon down there and the bar raises up and you're supposed to get that little beep.. nothing. I have two sets of headphones, tried both of them in the headphone jack in the front of the computer and in the speaker port in the back. Nothing. So it hadn't been the speakers. Which I hadn't been doing anything w/ them anyway, it's not that the sound is just turned down. It's really odd that the OS is reporting nothing wrong yet even when i try to plug in headphones, I get no sound whatsoever. I have tried to troubleshoot as much as I could but it's been a long day now and I can't figure anything else that it could be except something I did in that .exe program and idk enough about it to go from there. I need help, pleas... Read more

A:Sound not working anymore!!

jeffm9887,
Welcome to SF. You can try doing a restore back to a point when it was working.

3 more replies
Answer Match 45.78%

Hey all,
I'm new to this forum. I'm trying to figure out what when wrong with my laptop. I had a trojan attack at some point previously and I'm not sure if it is related, but I recently found that my audio is not working. The audio doesn't work through my speakers as well as headphones. I'm using Windows 8.1, on my Acer Aspire E 15 E5-521-48KN. In the task bar (on the right-lower corner), there's an 'x' mark on the sound icon and when I hover over it, it says 'The Audio Service is not running.' I'm thinking this is probably a software issue and not a hardware one, but I'm not sure. I have tried re-installing the audio driver, but that didn't seem to help.

I would appreciate any help with this issue. I've tried going to a local computer repair store who has asked me to try formatting the laptop, but I'd like to try and avoid that if possible. I've ordered for a recovery disc just in case, however.

Thank you in advance.
 

A:Audio not working anymore

Just wanted to add that when I try navigating to Control Panel, it's an empty window with the mouse in a waiting mode. It never really opens, so there's something amiss and I can't seem to figure out.
 

4 more replies
Answer Match 45.78%

First this utility:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Celeron(R) CPU B820 @ 1.70GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 1931 Mb
Graphics Card: Intel(R) HD Graphics, 773 Mb
Hard Drives: C: Total - 121647 MB, Free - 78206 MB; D: Total - 161627 MB, Free - 101822 MB;
Motherboard: ASUSTeK COMPUTER INC., X55A
Antivirus: AVG AntiVirus Free Edition 2015, Updated and Enabled

Alright.First of all hi to everyone.My shift button on keyboard is not working.I don't know why.I repaired my system on 2 January,taken keyboard away,disk,etc. I know how to do those stuffs,because i needed to clean him.On 15 January i got a problem that shift key is going on lack activity.Sometimes it works,sometimes it doesn't.Now it works no more. The interesting thing is that... it may sound ''funny'' because one day i just tested and my shift key works only when i use shift key+K letter. So when i hold shift with K,L,0,9, (something from these 4) it works and then i must hold shift+any of that 4 keys and then i can type everything like _"("(("("$("$("!!!)?>?. Without that,my shift is not working.I assume it has to do with shortcuts,etc. They told me on other forum that my Keyboard is problem and it is Hardware problem not Software nature.So any ideas?
 

A:My shift key is not working anymore.

8 more replies
Answer Match 45.78%

About a week ago my notebook started losing time. I initially thought it was a failing cmos battery, but it happens even when the notebook is left on. If i watch anything in full screen, the screen turns off to save power, or i play a full screen game, the clock doesn't keep up. Sure, fixing it temporarily is easy, but highly irritating. If anyone has a fix i'd love to hear it.
I'm running Windows 10 FYI.

More replies
Answer Match 45.78%

Hi
I have a Travelmate 4272WLMi with XP Professional

To play videos on my TV I had been using a S-Video cable. My friend got a Monitor to Component Video cable from a Jay Car store. I tried this from my laptop to my TV and it didnt work there was no picture. Since using that cable I am unable to get my S-Video output to work. I have tried restarting it, changing the settings in the ATI control centre and still nothing.Could the monitor to component video cable have damaged the video output? The laptop LCD works fine. How can this be fixed? What will need to be replaced and where can I get it?

Thanks Brendon
 

More replies
Answer Match 45.78%

recently at home I switched from wireless to cable. However, when I go back to university (which is where I am now), It's back to wireless. However, first time I tried to pick up the wireless again (which always used to work), I couldn't.

I am using a HP dv6000 notebook. I tried uninstalling and updating to the latest wireless drivers etc... but no luck. I know it's defiantly not a router issue cause my housemates are all connected and I tried connecting to another wireless network and failed.

I did a windows diagnostic test and it said there was a problem with the wireless but couldn't tell me what.

Any help would be appreciated : )

A:Internet not working anymore! please help : (

Windows IP Configuration

Host Name . . . . . . . . . . . . : Philbert
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Network Bridge:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : 02-1E-68-E3-80-98
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::180b:54b2:28d5:9c09%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.9(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, April 22, 2010 3:05:52 PM
Lease Expires . . . . . . . . . . : Friday, April 23, 2010 3:46:47 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 402792040
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-AE-63-89-00-1E-68-E3-80-98
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{DD6EEDC8-9F9B-4E9F-B41B-45FA706EA1E4}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00... Read more

4 more replies
Answer Match 45.78%

For some reason, awhile back, I used to be able to record with Stereo Mix on Audacity, Hypercam, even to other people on Skype. But all of a sudden, out of nowhere, it just stopped working. There was a time where it said it was unavailable, but now it says it is working, but when I try to record sound using Stereo Mix, it either doesn't record the sound, or the program doesn't recognize that Stereo Mix exists.

I have "Realtek AC'97 Audio for VIA (R) Audio Controller" under my Stereo Mix properties (I'm guessing that's like the driver or audio device name). When I try to record in Audacity, I get a message saying "Error while opening sound device. Please check the input device settings and project sample rate." The input device (the Realtek AC'97 I'm guessing) says it's "working", and the project sample rate is the exact same as it says in my recording settings. My guess is that Audacity doesn't see "Stereo Mix" or "Realtek AC'97" as a device currently on my computer, which doesn't make any sense, cuz my computer says otherwise. It also doesn't make sense, because I'm able to select "Stereo Mix" as a device for recording IN Audacity itself.

I've read other posts about this problem, and none seemed to be of any help (I've tried the solution posted but didn't fix it). Is it because my "Stereo Mix" isn't set up to my speakers or something? Is it because I have Realtek AC'97 and not the HD one? Could it have s... Read more

More replies
Answer Match 45.78%

For some reason, awhile back, I used to be able to record with Stereo Mix on Audacity, Hypercam, even to other people on Skype. But all of a sudden, out of nowhere, it just stopped working. There was a time where it said it was unavailable, but now it says it is working, but when I try to record sound using Stereo Mix, it either doesn't record the sound, or the program doesn't recognize that Stereo Mix exists.

I have "Realtek AC'97 Audio for VIA (R) Audio Controller" under my Stereo Mix properties (I'm guessing that's like the driver or audio device name). When I try to record in Audacity, I get a message saying "Error while opening sound device. Please check the input device settings and the project sample rate." The input device (the Realtek AC'97 I'm guessing) says it's "working", and the project sample rate is the exact same as it says in my recording settings. My guess is that Audacity doesn't see "Stereo Mix" or "Realtek AC'97" as a device currently on my computer, which doesn't make any sense, cuz my computer says otherwise. It also doesn't make sense, because I'm able to select "Stereo Mix" as a device for recording IN Audacity itself.

I've read other posts about this problem, and none seemed to be of any help (I've tried the solution posted but didn't fix it). Is it because my "Stereo Mix" isn't set up to my speakers or something? Is it because I have Realtek AC'97 and not the HD one? Could it ... Read more

A:Stereo Mix is not working anymore

Since this is a Vista problem, you should repost this on our Vista Forum section.


Vista Forums

2 more replies
Answer Match 45.78%

Hi.

i'm trying to make my own win7 install cd with update and so on.

i've done a few test before but now i only get error from dism

error: 3 Det g?r inte att hitta s?kv?gen. Transleted: Can not find the path.

all dirs i've tried have no spaces in them tried a few diffrent .wim files and i get same error with imagex

tried to google but cant find anything that helped me.

i've done it from commandline and with gdism

Command line that ran is dism.exe /Mount-WIM /WimFile:"C:\Temp\Win7x64.sv-SE\sources\install.wim" /index:1 /MountDir:"C:\tempmount"


DISM-verktyget (Deployment Image Servicing and Management)
Version: 6.1.7600.16385

Fel: 3

Det g?r inte att hitta s?kv?gen.

DISM-loggfilen finns i C:\Windows\Logs\DISM\dism.log

i have done SFC /SCANNOW to and had no errors

anyone here know what to do?

A:dism not working anymore

C:\Temp\Win7x64.sv-SE\sources\install.wim really exist?
C:\tempmount exists? Is empty?

6 more replies
Answer Match 45.78%

Windows 7 x64 SP1
Acer Aspire 5830TG

For about a month now, some software in my computer has not been working properly - it crashes immediately on starting, without giving an error message. The problem seems to be fixed after hibernating and restarting my computer several times (Not always), but then it stops working properly once again when I shut down and restart my computer instead of hibernating and restarting it.

The following software seems to be encountering this problem:
Daemon Tools User Interface
Free Download Manager
AVG User Interface

(Note - only the User Interface of AVG crashes. The rest of it works perfectly, detects viruses, etc. Same for Daemon Tools - ISOs are mounted properly, but the UI does not work)

I posted in the virus help forum, but the tools they asked me to use did not give any positive results, so this is most probably NOT due to a virus. Everything else seems to be working properly.

Has windows gone corrupt?

Please help. Thanks in advance.

A:Some software not working anymore

Normally when software starts to play up, a reinstall usually resolves - but as this problem involves more than one program, perhaps running a clean boot may pinpoint the cause should there be a conflict with another program on start up.

Cancel the auto-fix to read through the MS article.

4 more replies
Answer Match 45.78%

So a few days ago I got this nasty piece of spyware that infected my PC. It was one of those redirect ones that infects the boot sector. So I got it cleaned and everything running as it should except for my batch file I have to that runs taskkill that kills all processes of iexplore.exe.

Now all I get when I run taskkill /F /IM iexplore.exe
ERROR - The specific module could not be found.

Turns out I can't kill anything using it now, not even by pids. I can still kill things using the task manager though.

I ran sfc /scannow and everything was fine with the system files. There is nothing weird being run in the task manager and malwarebytes is coming up clean and so is symantec endpoint. No infections anywhere. I even checked to make sure the path was correct.

I am running it as an admin and thats the first thing I checked. My user account shows administrator. So I am thinking something got changed in the registry but I am not sure where to look or what would have changed. One other thing which is odd that started happening after all this is there is no information in the system window on my processor and ram anymore which was showing before I got hit with the virus.

Vista SP2 is the OS I am running.
 

A:Taskkill not working anymore

I would back up all your data and re-install Vista, or use Factory Recovery if relevant.
 

1 more replies
Answer Match 45.78%

Hi
I have a Travelmate 4272WLMi with XP Professional

To play videos on my TV I had been using a S-Video cable. My friend got a Monitor to Component Video cable from a Jay Car store. I tried this from my laptop to my TV and it didnt work there was no picture. Since using that cable I am unable to get my S-Video output to work. I have tried restarting it, changing the settings in the ATI control centre and still nothing.Could the monitor to component video cable have damaged the video output? The laptop LCD works fine. How can this be fixed? What will need to be replaced and where can I get it?

Thanks Brendon
 

A:External Tv not working anymore

There is probably a switch/function that must have been set to power on the component and relay the video signals to the TV. Check if you can use any other monitor before making a conclusion to replace parts.
I'll assume you used some some external DC source to power your component, if the voltage or the power rating exceeds the comps requirements, then some parts might be damaged...
Try this; press fn+ crt/lcd buttons in a split of a few seconds and see what happens.
 

1 more replies
Answer Match 45.78%

So, I had an old out of date sound card for my PC, and I finally got a new one. After I got this new one my sound worked, and my microphone also worked, for my headset. Today I decided to move my computer into the basement for my own use, and once I get down there I connect everything and it is all good, until I realize my sound isn't working. This is the same problem that happened with my old sound card. I was using it just fine, and unplugged it, 10 minutes later, it stopped working... any suggestions?

Thanks,
Glurft

A:Sound isn't working anymore...

Go back over your speaker connections and also make sure the speakers are plugged into the AC power. Try it with a headphone and see if it works. Usually, moving a PC to a different area, it turns out to be a connection problem.

9 more replies
Answer Match 45.78%

Ok so here's my problem. It started about a week ago.

A week ago I was watching a movie, and I paused it. When I replayed it the movie stopped. I tried re-running it but it woulnd wotk anymore.
Today I tried watching another movie, it worked perfectly. Now I tried putting in a audio CD (store bought music) and it dosn't run. I can hear the drive trying to read it, but theres no actual turning of the CD.

I went to My Computer > Double clicked on D: drive and this pops up "D:/ is not accesible. The request could not be performed because of an I/O device error."
Whats the problem and how can I fix it?
I should also say that when I first had trouble, I would try to take the disc out by pressing the button, and it wouldn't come out. It just stayed in, so inside I had to put a pin in the little hole and then the thing popped out.
By the way I have a Windows XP, Toshiba.

Thank you for any help.
 

A:D: drive isn't working anymore?

7 more replies
Answer Match 45.78%

Win7 x64 RC1 7100
RK launcher was working till last week then maybe some update caused this or something else is preventing it to show on desktop.

Its running in task manager but not showing on the desktop how can I get this working , its hell lot of a problem without the icons.

A:RK launcher not working anymore

I now installed Win7 x64 RC1 7600 & that too have the same issue seems that RK launcher is not anymore compatible. Its very light on system resource can anyone tell me what dock application are you using which is light on system resources.

I dont want to use start dock as it hogs the system resources.

2 more replies
Answer Match 45.78%

So streaming to my ps3 worked flawlessly on build 7000 but now with RC1 I seem to be having major problems. I add all my media to my media player library and it all shows up, then when I turn on my ps3 to stream the video it gets rid of anything in the administrator documents folders and just shows the stuff in the public documents folders on both the ps3 and windows media player. I've tried re-adding the files back into WMP and trying again with the same results, it just doesn't want to work. I have my streaming settings to allow access to all devices on the network and to stream my entire library. What is going wrong and how can I fix it?

Edit: The same goes for streaming to the 360, this is so odd...

A:Streaming Not Working Anymore

I just put anything i want to watch into Libraries/videos folder and my ps3 picks it up fine.

9 more replies
Answer Match 45.78%

Hello. Recently, The homegroup feature on the my laptop and desktop stopped working and I could not get it operational again. When I first bought my laptop, I connected it to my homegroup and it worked perfectly. after that, I really did not touch it but I always noticed that the homegroup did detect the other computer. About a week later after turning on homegroup, I tried to access the files on my desktop but when I tried to click on pictures, I could not access the files. The next day (today), I left the homegroup on both computers and tried to connect it again. At the end of configuration, it said the connection failed there was an error. Then, I tried again and now, each computer cannot even detect that there is a homegroup. We use an AT&T router and the wireless for the house is working without problems.

So, How can I fix the homegroup feature on windows 7? Both network discovery and public folder sharing are both on and it cant be the firewall because it worked before and I never changed any settings on the firewall. Please Help!

Whats funny is around the same time, the wireless printer in our house has stopped working so wireless printing is not possible anymore. I tried to fix it but still nothing yet.

Thank you in advance for the answers.

A:Homegroup Not Working Anymore

Hello,

Can the laptop ping the desktop? Can the desktop ping the laptop? You may do this from a command prompt by typing: ping IPAddress then enter, for ex. ping 192.168.1.10(IP output can obtain by typing ipconfig /all)

Are you using the Windows built-in firewall or a Software firewall/security?





Quote:
Both network discovery and public folder sharing are both on and it cant be the firewall because it worked before and I never changed any settings on the firewall.

3 more replies
Answer Match 45.78%

So in my PC I have a Sony DVD RW that I've had now for a good couple of years. It has worked fine forever and suddenly it isn't anymore. When I put in a DVD (and yes I have tried many, original copies and burned) it can read the title but it cannot play in any program (RealPlayer, Windows Media Player, PowerDVD). In Windows Media Player, it gives me a message that says "Windows Media Player cannot play DVD video. Open Display in Control Panel, and then lower your screen resolution and color quality settings. To view the DVD Troubleshooter, click More Information.", but I've tried adjusting the resolution and it hasn't helped. I also uninstalled the drive and re-installed it to no avail. If anyone has had this problem or has suggestions that might help I'd really appreciate it! Thanks!
 

A:DVDRW Not Working Anymore??

11 more replies
Answer Match 45.78%

Yesterday I went to my parent's work...I started to used their computer and tried to type something into the URL address bar on internet explorer....then I pressed enter but it won't go anywhere! I set my homepage to Google before so if I type something in the google search and goes and searches and I can get the page from there...but the URL address bar doesn't work anymore...

I also opened up the task manager and I saw like 20-30 processes called "verclsid.exe"


I restarted the comp...but same thing...then the "verclsid.exe" processes come up again...

what happened? It was either my mom or my dad who was using the computer before I came on...

I have explorer 6.0 on windows xp service pack 2

A:IE URL Address bar not working anymore

Verclsid.exe is used to verify a COM object before it is instantiated by Windows Explorer.

http://www.microsoft.com/technet/sec.../ms06-015.mspx


I would look over First Steps to Removing Malware

Also, look over this
http://www.techspot.com/vb/topic5215.html

3 more replies
Answer Match 45.78%

Hi! This week I encountered a very mysterious problem with the internet connection of my desktop pc. While download is fine as usual, upload is slow at best, not working at all sometimes. Surfing is nerve-wracking, download speed of files is as usual, however some internet speedtests don't even manage to upload 32K files for test purposes and report upload speeds around 2 kbyte/sec.

The problem is not related to my ISP since my laptop doesn't have any problems with the connection (using cable and the same router). I have also tried instaling a PCI LAN card, same problem arises. I have tried using an other cable. I have tried using Ubuntu and here a strange thing happens. The upload speed is lower than with my laptop but still nowhere near normal levels. I have tried using safe mode, same problem.

I have run a hijackthis diagnosis and there are no possibly dangerous entries. The internet connection is also not blocked by malware since NetSpeedMonitor reports 0.00 KiB/s upload speed when I (try to) perform an internet speed test.

Of course I have also searched the forums. My problem seems to be identical to this one (unsolved).

Other observations:
Firefox and IE have the same problem.
Some internet pages don't even load (GMAIL)
Skype seems to have no problems with the internet connection and can even upload files at fairly normal speed!

My specification:
Windows XP nLite (only tweaks) with SP3
Motherboard: MSI P6NGM (VIA; don't buy this one, it sucks, ... Read more

A:Upload not working anymore

OK:If you haven't,I would run your antispyware/antivirus apps.
Also,if you boot into safe mode with networking,any difference.
also,I might see if there are any more current network adapter drivers for your pc from the makers web site.
 

1 more replies
Answer Match 45.78%

Hi, if this is the wrong forum for this post then I apologize but I have an internet problem. I am on dial up AOL and ever since I uninstalled some programs, one I remember N-Case, my internet won't connect passed step 4 on AOL. It will dial but will not connect. I think this is N-Case that is giving me the trouble, because this has happened before, but I can not go back, because system restore doesn't go that far back. Yes it has been that long. I just never really had any time to mess with it. So I believe it has messed with my settings, because also my network is messed up. It won't even allow me to make a multiplayer game, or find a game connected to the network. I can share files, but that is about it. Also says my IP is a bunch of 0's. If anyone can help me through this problem I would appreciate it very very much. Thanks for your time and help.

Oh, steps I have taken were:
Modem Helper - Passed
Reinstalling Modem Drivers
Reinstalling Windows XP
Reinstalling AOL
 

A:internet not working anymore

7 more replies
Answer Match 45.78%

I've had a TDK CD-RW 40x for a few years now, and it has been working fine up until recently.

I can use the CD drive once, and then after that, when I go into My Computer and hit the CD drive (with a CD in it), it tells me: "D:\ is not accessible. Incorrect Function" but with no CD in the drive, it asks me like regular to put one in. The only way to get it to work again is to restart the sytem. And then, it will work once, again until next restart.

The only thing I really changed was upgrading my Nero burning software to the newest version. Burning works fine, but that counts as my "one" CD use per restart. The InCD software for CD-RW's doesn't work at all.

Does anyone have any experience with this? Thanks for any help.
 

A:CD Drive not working anymore

11 more replies
Answer Match 45.78%

Logfile of HijackThis v1.99.0Scan saved at 2:27:36 PM, on 1/19/2005Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\System32\hkcmd.exeC:\Program Files\CA\eTrust\InoculateIT\InoRpc.exeC:\Program Files\CA\eTrust\InoculateIT\realmon.exeC:\Program Files\QuickTime\qttask.exeC:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_S4I2G1.EXEC:\Program Files\Common Files\Real\Update_OB\realsched.exeC:\Program Files\CSBB\CSv10P070.exeC:\WINDOWS\System32\kjpmjdxo.exeC:\Program Files\CA\eTrust\InoculateIT\InoRT.exeC:\WINDOWS\System32\vmss\vmss.exeC:\WINDOWS\System32\ctfmon.exeC:\Program Files\CA\eTrust\InoculateIT\InoTask.exeC:\Program Files\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files\eFax Messenger Plus\Dllcmd32.exeC:\WINDOWS\LogWatNT.exeC:\Program Files\Common Files... Read more

A:My PC Not working properly anymore. Please Help

After following your guys's instructions here is the new log. (Thank you Daisuke!)Logfile of HijackThis v1.99.0Scan saved at 10:26:18 PM, on 1/21/2005Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\Program Files\CA\eTrust\InoculateIT\InoRpc.exeC:\Program Files\CA\eTrust\InoculateIT\InoRT.exeC:\Program Files\CA\eTrust\InoculateIT\InoTask.exeC:\WINDOWS\LogWatNT.exeC:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\hkcmd.exeC:\Program Files\CA\eTrust\InoculateIT\realmon.exeC:\Program Files\QuickTime\qttask.exeC:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_S4I2G1.EXEC:\Program Files\Common Files\Real\Update_OB\realsched.exeC:\WINDOWS\System32\ctfmon.exeC:\Program Files\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files\eFax ... Read more

2 more replies
Answer Match 45.78%

Hey there!
Since today I have a problem, some programs are just not starting anymore.
For example, there would be the Device Manager, the Event Manager, Computermanagement.
It just shows the loading mouse for one or two seconds, but nothing happens, not even after trying to start it with cmd.exe (which still works) or PowerShell.

I don't know what to do, tried resetting my save point but that didn't change much.

Any help is highly appreciated!
Yours, Jerome

More replies
Answer Match 45.78%

I can't access any of the features in the Start Menu except for Desktop (E.g. I click on Mail and the tile has the little animation like it's been presses but nothing else happens). I've also been having trouble with my Cyborg V3 mouse, which worked fine until I moved my computer (which is when the Start Menu started playing up too).

For the mouse I've tried manually installing the drivers after downloading them from Saitek's driver page only for me to be brick walled (I followed the on screen prompts but it came to 'Please select which device you want to install' and wouldn't register my mouse as being plugged in), I tried downloading the driver from Windows Update but it just says it failed to install (Error code: 800f0219). I tried going into Device Manager (it came up as an Unknown Device and kept flashing between the 'Other Device' category and the 'Human Interface category'), uninstalling the drivers I currently had and then re-installing them through Device Manager, which came up saying there was some error with the INF file ('written for W95 or later'). I've also tried defragging and cleaning my registry.

As for when I moved my PC... I was just moving it from one side of the room to the other, turned off the wall socket, unplugged everything, plugged everything into the back of my PC (didn't notice these sockets hadn't been switched off too) and I ended up getting electrocuted plugging my signal cable into my monitor (I didn't think much of it at the time but ... Read more

More replies
Answer Match 45.78%

I replaced the front cover surrounding my keyboard, And the cover happened to come with a controlpad and mouse , ANyhow I started to realise how complex and how many tiny screws there were as I started to open and replace. I am VERY picky and when I bought this laptop 2nd hand it hard a Wear mark on the right side of the mouse pad on thre Fascia Keyboard Surround. Anyhow I replaced it and it looks brand new again. Only thing is when I Started putting things together, THere are now 5 screws left and they are teh tiny ones that go around the keyboard area.. anyway i could not for the life of me find where they go anyway i put the laptop back together and noticed the capslock LED flicker then turn off. I then pressed it and it came on but not as bright, I then Pressed HARD and it turned on and then off. I re-opened everything and plained with the ribbon plugs unplugged all of them and put them back on, this time before i put it all together i tested the caps lock key and it worked fine without pressing hard or anything. ANyway i continued and put the rest back together. Guess what? It now does not turn on at all. I re=opened it twice now and Unplugged everything almost and re-plugged it all and NOPE the capslock LED will not work I cannot even find out where it is. It must be embedded in the actually key itself as I looked around the area and its not there. Anyway, what do you think I should do? The key itself works fine its just the LED I am so annoyed can you please ... Read more

A:CapsLock LED not working anymore

By the way its one of these models I think they are all practically similar in style - hp 13t-3000 Does anyone know any complete teardown sites for this? I am so frustrated and angry cause i ordered a complete keyboard surround fascia cause im so picky and now I have 5 tiny screws left and I have this little rubber surround that I THINK should go in the place surrounding the charger but I could not figure out how the HELL it goes back on. SO i left it out. It works fine with out it, and EVERYTHIING else works perfect . You know how the keyboard suround came with the mousepad controlzone? Well even that works better, smoother, the clicks are crisp. Its like its a brand new laptop. Except for that DAM led  ANy help would be great otherwise I will buy a whole new keyboard for it, i mean they are only like $40 bux but can someone confirm if the LED is actually part of the key itself? I think it is because its an Ultrabook its so compact its nuts. I dont think its a damaged ribbon otherwise something else wouldnt work also and the fact that when i first put it together i saw it flicker and dim and then turn off and turn back on when I pressed it hard, as i stated when i re-opened it and finally put it back together. LED wont turn on no matterhow hard i press or even press the surround area. SOrry if its too long but your help is much appreciated Regards Andrew  

1 more replies
Answer Match 45.78%

Hi,
I've had zonealarm free for the past week and every thing's been great but today in the middle of being on the net the internet stops working. I figured out that zonealarm was blocking the internet now. I don't know what happened sinse I haven't messed with any settings in ZA. If I shut ZA down the internet is fine. Any help?
 

A:zonealarm not working anymore

16 more replies
Answer Match 45.78%

When I put a dvd in the dvd-player for a game or anything, it used to autostart that dvd. But suddenly, it doesn't autostart anymore. I have to start it manually, by clicking the drive and choosing "autorun". It is the same for other drives as well, such as cd-rom drive. How do I fix this?
if it's possible, I would like not to install any programs. So are there any configurations or properties I can check?
 

A:autostart not working anymore

8 more replies
Answer Match 45.78%

Toshiba dvd-rom sd-m1612

My dvd player no longer works. Since I reinstalled my OS about 3 months ago, both power dvd and windvd don't work anymore. I just reinstalled my OS again last night and both these programs won't work (they give the same errors I was getting before I reinstalled OS). In power dvd, it runs the warning screen but when it should play the movie, it freezes...it tells me it can't run the dvd with tv out enabled, but my video card doesn't have tv out. In win dvd it just won't go to the root menu.
I don't think it's a software problem because both these programs used to work and now no dvd program will run dvd's on my computer. Any advice?
 

A:DVD player not working anymore

6 more replies
Answer Match 45.78%

I have a compaq presario SR1320NX and the cd/dvd drive isn't working anymore. I've had the computer since 2007. And can anyone can give me a link on what cd/dvd drive that would be compatible with this computer, I would greatly appreciate it since I want to change it if it doesn't work.
 

More replies
Answer Match 45.78%

Hi,

IE 7 is not working anymore. I get the following error message: Internet Explorer cannot display the webpage. I'm not sure but I may be this Tuesday's Microsoft updates/patches that are causing the problem or maybe not. Anyone experience this problem after downloading this Tuesday's updates. I get the error message with every web site. I can't load any web sites. Firefox works fine.

Thanks for any responses.

vb_bn

A:[SOLVED] IE 7 Not Working Anymore

Hello and welcome to TSF

Try of the solutions here:

http://support.microsoft.com/kb/926431

What firewall do you have?

Do you have these problems in any other browsers? Please try one of the below (both are free):

Firefox
http://www.mozilla.com/en-US/firefox/
Opera
http://www.opera.com/

4 more replies
Answer Match 45.78%

My cd tray was working fine, and now its not working, when I press button on keyboard it doesn't pop out, and when I put a cd/dvd in nothing pops up, aka if I put in an audio cd windows media player doesn't pop up, it doesn't even show my cd drive in my computer, and it doesn't even recognize a cd is in

works fine on my ubuntu side.

look at photos, these are the errors

A:Cd Tray is not working anymore.

got it working!

used: DVD Drive Icon Disappeared from Computer - Fix[11]=Hardware%20and%20Drivers

1 more replies
Answer Match 45.78%

I had it hooked up a few days ago before I moved my computer out to the living room. After hooking everything back up again my TV no longer shows my desktop and no settings I've tried in the nVidia control panel works. I'm using a 9500 GT.

A:S-video to RCA not working anymore

As I can't edit I have to reply to my own post.

OK thing is I was chatting with nVidia live support and he asked me to switch my TV from NTSC to PAL and after doing so my monitor went black and by the time I had rebooted with the s-video cord removed so I could see again live chat went offline.

So, anyone know how I undo that without having the TV attached as doing that again will just make my monitor go black again. Thanks.

Strange. The edit button showed up in this second post. Why doesn't it show up in the first one? Weird.

1 more replies
Answer Match 45.78%

Okay it's a bit of a weird one, basically I think I've blown up the whole HDMI related hardware on my desktop. The lead I was using for HDMI wasn;t the most reliable and would have to be plugged out and in sometimes to get it working -

I've tried several other working hdmi leads - tested and it no longer works.
Also used VGA < on Desktop to HDMI < on TV - it doesnt work.

VGA to VGA is working thankfully so I'm using the desktop now to post for help. Any ideas how much this would cost to be fixed? or could I do it myself?. Thanks for any help.

A:HDMI PC to TV - Not working anymore.

hi are you plugging it in to the graphics card for hdmi if so try the motherboard hdmi port. remove the graphics card to use motherboard hdmi port to see if that one works.

1 more replies
Answer Match 45.78%

Hi guys,

just got my new laptop and I'm loving vista.

windows + tab is a really cool feature but it has recently stopped working for me.

alt + tab works fine, but when I hit windows + tab it acts as if I'm just hitting the tab key

I know the windows button is still functioning properly because windows + d still takes me to the desktop.

I don't recall changing any settings that would effect this, but maybe I'm wrong.
Do any of you have a possible fix for this problem?
 

A:windows + tab not working anymore

I know it may be obvious but have you turned windows aero off?
 

3 more replies
Answer Match 45.78%

Has anyone had the problem of notepad stop working. I just noticed it when I tried to save my HJT Log. I can click on notepad and nothing happens. I am running windows XP SP1 (I had my system to crash with SP-2). Here is my HighThis Log:

Logfile of HijackThis v1.99.1
Scan saved at 3:02:50 PM, on 3/14/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\alg.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZONELABS\vsmon.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\inetdata\services.exe
C:\Program Files\Roxio\Easy CD Creator 6\DragToDisc\DrgToDsc.exe
C:\Program Files\Roxio\Easy CD Creator 6\AudioCentral\RxMon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\Program Files\BroadJump\Client Foundation\CFD.exe
C:\Program Files\Support.com\bin\tgcmd.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\Program Files\Webroot\Spy Sweeper\SpySwe... Read more

More replies
Answer Match 45.78%

I wanted to migrate back to Windows8.1, but the mediacreationtool doesnt let me download the windows8.1 iso file anymore. I guess this totally purposely, to force people into Windows10. It just says something like "cant download bla bla" the moment I click ok. A friend tested it too and it doesnt work.

Are there any other save mirrors for a Windows 8.1 x86 iso? Or can I get any logs by the mediacreationtool, why it's not working?

A:mediacreationtool not working (anymore)

Were you using this link ?

https://www.microsoft.com/en-ca/soft...nload/windows8

I just tried it and it got started ok.

P.S. I did not finish it because I have no use of a win 8/8.1 iso file.

5 more replies
Answer Match 45.36%

All of a sudden my avi files will not open. Even highlighting them makes windows explorer close randomly. Does anyone have an idea whats wrong?
 

A:Avi files aren't working anymore

Bump

If I need anymore details or something let me know...I will try. Although honestly, I'm not sure what else to say. I can't think of anything specific I could have possibly done to screw it up. I didn't mess with any codecs or anything as far as I can remember. If you can help me, I would really appreciate it.
 

1 more replies
Answer Match 45.36%

So, I've been trouble free on Windows 7 for a long time. Today, while searching for a document containing the word "audit" I realized that my Windows 7 search is not returning correct results.

I open up the Documents library link, and I see all of my files. I see files with the name audit in them. I go to the top and put audit into the search field and it comes back with 2 files...and misses handfuls of other files that contain the word. I then search for .xlsx (as this is a spreadsheet) and I cannot find that either. I can find other .xlsx files, but not a good handful of them.

I've cleared the index and rebuilt it, but that didn't resolve the issue. My results are the same as they always were.

Suggestions from anybody on what to look at next?

A:Windows 7 Search Not Working anymore

Any search or index service errors in your event log?

7 more replies
Answer Match 45.36%

The scroll bar on my touchpad is no longer working. I went to the file to launch reinstall but it says that the file "SYNTPEnh.exe" on the Synaptics Driver Installation Disk is needed.
I do not have the installation disk??? Also my antivirus "quarantined something from the touchpad file and said it was a trojan...What can I do to get the scroll feature working again?
Thanks
 

A:Scroll bar on touchpad not working anymore

6 more replies
Answer Match 45.36%

I installed service pack3 for xp, now yahoo mail is not working anymore, anyone the same problem? Before i complain with yahoo i better be sure.

Might it be a feature by design? So i better get a hotmail account?

I now use firefox to go to yahoo mail, and it works fine, but if other people have the same problem, someone probably better ask yahoo to fix this.

IE7 is just configured standard way, no adsense block by firewall, browser extensions disabled.

Anyone? Same problem? Please put a reply, i will get a notification by mail.
 

A:XP SP3 and IE7, Yahoo mail not working anymore

I am having the same issue. I can see the sender and subject line on the preview on the yahoo home page, but when i click on the link , IE responds with cannot find page.

I can access the mail through the mobile site but lose functionality that way.

Any ideas gratefully recieved.
 

2 more replies
Answer Match 45.36%

I have problems with my internet, when I open Internet Explorer, it says: Webpage can't be found.
And when I click to see what the problems are, I only get to see some spanish window... I really don't know what to do, can someone please help me? o_O

A:My Internet Explorer isn't working anymore

Open Device Manager and see if there are any red x's or yellow flags next to your network adapter. Next, open a command prompt, Windows Key + R, type cmd and then type the following without the quotes and paste all the results back here, "ipconfig /all". Also check, open IE, click Tools, Internet Options, Connection Tab and then the LAN Tab and in the window that opens make sure that all the check boxes are clear, if not clear them and close IE and re-open IE.

2 more replies
Answer Match 45.36%

Ok the issue that I have is that I recently just lost my Wireless connection and cannot seem to reconnect to the connection. It has been working for almost half a year now but I noticed last night that my connection kept disconnecting and reconnecting every 2-3 min or so... and this morning it just lost the connection all together. It detects a few different wireless connection around me, but I tried all the unsecured ones and it attempts to connect yet after a while it stops trying to connect and return to listing all the avaliable networks. I retried connecting to my own wireless router(which seemed to get a strong signal) but it does the same thing (and yes I did enter the correct encryption ID pass). The router seems to be working fine as the two computer that's connected to through the ethernet wire is working fine.

The configuration for my system is a
D-Link : DWL-G520
Driver: 3.3.0.1571 (have to use this older driver as it seems like that this is the only driver that wouldn't cause random blue screens with the memory dump, every few minutes or so)
Motherboard: ASUS P4P800-SE
Processor: Intel P4 3.0 E GHz

Thanks for the help ^_^
 

A:Solved: Wirless not working anymore

Disable encryption and try to connect. If successful, re-enable encryption and try again.
 

3 more replies
Answer Match 45.36%

Well here's the deal. I own a 1GB MicroSD TransFlash Card for my phone, an LG enV. I don't have a port to directly transfer files to my card, so what I do is I take the microSD card and put it in an adapter and plug that into my camera. I transfer my files from the camera and once I'm done, I take it out and put the card into my phone.

For about 6 months it's been working fine.
Today I decided to put a .PNG file into the card so I can set it as my wallpaper on my phone. I dragged the .PNG file in the MY_PIX folder, and unplugged the camera. I then put the card into my phone like I've always done.
My phone started acting very strangely. I could still access my MP3 files that were in my TransFlash card, but a few things happened while the card was in my phone:

- 2 second delays when you press END to get to the main menu.
- I can't access two of my .JPG files on the card, along with the .PNG file I added today.
- I took a picture with my camera feature on my phone and attempted to save it, but it kept saying ERROR.
So I took out the card and played with the phone a bit. Everything turned out fine. The delays stopped, it was perfectly fine.
I put the TransFlash card back into my camera and attempted to take out that .PNG file that I added.

The computer made a "ding" that said that it detected the device, and attempted to Autoplay it.

The Autoplay froze. I tried to open My Computer, but that froze too.

I unplugged my camera an... Read more

A:MicroSD Card Not Working Anymore.

I would try formating the card. This does mean you'll loose all the data on the card though.
 

2 more replies
Answer Match 45.36%

I have a Dell Inspiron 720 with an HDMI port in the back. I have been using it with my Samsung TV to watch movies on. Now it no longer works. I ordered a new cable but it keeps telling me to check power supply, cable connection, and the make sure it's on the right setting. I have 2 hdmi ports on the back of my TV but still come up with the same error condition when I switch them. It appears the port in the computer is not working anymore. I have tried everything but nothing works. I am running an ATI 4200 which is on the motherboard. Can this be fixed or would I have to buy a new graphics card to get it working again. I did swap the cables but still get the same results. Does anyone have any ideas because I have run out of them???

A:HDMI Port not working anymore

The only way to fix it is to buy a new motherboard, do yourself a favor and buy a new video card instead, Dells are not worth fixing. But if it`s under warranty well then that is a different story.

If that`s a laptop then your ONLY option is to replace the motherboard, very simple to do.

EVGA - Products - Graphics

MSI USA - Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more

What keeps telling you to check the power supply ???

1 more replies
Answer Match 45.36%

Hi, I've been running Windows 10 for a couple of months without any real problems. I've downloaded a couple of free games from the Microsoft store. I recently ran a registry clean up program that deleted a number of empty files, folders and registry keys. Since then my two games have disappeared and when I select Store from the dialogue box I get a brief screen flash then nothing else happens. I've found the store using my browser (Chrome) and tried to download the games again using the 'get game' button but nothing happens. I have cleared the store cache but this doesn't help.

I've not got any antivirus running except Defender. Tried a restore to a couple of days ago but it failed! Have checked region, date and time, all correct.

Any suggestions would be appreciated.
 

A:Microsoft Store not working anymore

A registry cleaner can cause a lot of issues as you have discovered and usually they do not need to be run

On the restore - what was the error message?

do you have older restore points , you could try ?
 

2 more replies
Answer Match 45.36%

This is my first post here, and I came here to ask advice on a big problem, so bad I'm posting this from Knoppix Linux because windows gets stuck in an infinite boot loop. Let me tell you the history of my windows disintegrating: a few months ago, my windows was still logging in but DWM.exe stopped working. This was fine because explorer.exe started up a minute later one week ago, after logging in, I got a black screen with only my cursor. I couldn't do anything, exept unistalling my video driver and unistalling avast anti-virus, because that was causing troubles. I could only do this in safe mode. Surpisingly I was able to reboot and after waiting a little longer, I could work normally. Until yesterday, when windows was functioning normally, I got messages that some files became unreadable and corrupt. I immediatly shut down my pc and started startup repair, I tried system restore en system repair multiple times, but neither of them worked and when I rebooted, My system got stuck in an infinite boot loop. Today, I can still acces all the files on my hard drives, but when I try to check and repair the filesystem, Knoppix found some bad sectors in my hard drive. Now I am hopelessly looking for answers and I thought asking some help on this forum. http://www.sevenforums.com/images/smilies/sad.gif Kind regards, Durneztj

A:what started as DWM.exe not working, now I can't boot anymore.

Excuse me for the long text, but I structured it more when making it. Pleqse help, I need this system up and running again before Christmas.

4 more replies
Answer Match 45.36%

hey all

I've been working for days on this problem but nothing is working...a week or so ago I decided to reinstall windows xp with sp1a because my computer was going really slow and I thought it might help...
I'm the host computer on a 4 comp dsl/router network...the reinstallation went fine for me except my flatmates said they couldn't connect to the internet anymore but they could still get on the network...so I went into network properties and tried to tick the Internet Connection Sharing option to allow other users to connect through my comp but the error "An error occurred while internet connection sharing was being enabled...the specified service does not exist as an installed service"...so I browsed the net looking for solutions...I think I found one but I can't carry it out...I saw someone say that reinstalling service pack 1 would fix the problem...so I tried uninstalling it from add/remove programs section but it's not there so then I found my windows xp cd but my g/f 'cleaned' my room a few days ago and threw out the box with the reg key on it so I can't reinstall windows again unless there is a way to find the reg key I typed in is stored on my computer somewhere.........I also tried installing service pack 2 but my computer ran so slowly with it and the internet crashed for me when I tried opening it...also in services I made sure that ( telephony, application layer gateway service etc) were all started and auto... Read more

A:Internet Sharing not working anymore

8 more replies
Answer Match 45.36%

I have cable internet and have two comps running off it. I have xp home sp2 on one and win98se on the other. the connection is split using a Netgear RP614v2 Router. for some reason i was getting no internet activity when using the router. i disconnected it and called my isp, they couldnt advice me on the router. i can connect to the net fine if it is Modem>computer, but not Modem>router>computers. this has just happened, all of it has been working for the past 2 months.
 

A:Netgear Router LAN not working anymore

I have had this problem too on occasions. I would suggest logging into the router http://192.168.0.1 Then I would go through and double check your settings. Make sure obtain ip address automatically is how yours is set up. Tinker with the settings and you should be able to get back on the net through the router. You know your internet connection is fine. The only reason it won't work through the router is that there is something it does not like now.

HTH

DWF
 

3 more replies
Answer Match 45.36%

My disk drive stopped working a couple of days ago, by not working I mean it was making a weird noise and kept opening randomly (which got pretty annoying) just today i tried to burn a cd and nothing. I put the disk in, it doesn't seem to be spinning, it makes this noise about 12 times and then just repeats, after a while it will stop, without nothing done but wasted time. I have a HP Pavilion dv6000 (rg36oua#aba), Vista Home Premium, My DVD/CD Rom Drive is a HL-DT-ST DVDRAM GSA-4084N ATA Device. The Device is working properly and it has the latest/only driver, unless I'm mistaken.
 

A:My disk drive is not working anymore!!

how old is your drive? they are not eternal, especially if you use them a lot
 

1 more replies
Answer Match 45.36%

When I put a dvd in the dvd-player for a game or anything, it used to autostart that dvd. But suddenly, it doesn't autostart anymore. I have to start it manually, by clicking the drive and choosing "autorun". It is the same for other drives as well, such as cd-rom drive. How do I fix this?

A:[SOLVED] autostart not working anymore

hello okee,

once again you need to post in the forum for (Windows ME)

this forum is for XP

6 more replies
Answer Match 45.36%

So, I just wanted to burn a CD, and I noticed that the light on my DVD-burner is not on, and I couldn't open the tray. So, I checked if the power cord was disconnected. Was not. I thought to uninstall it and reinstall, but the first thing to catch my attention in device manager was that there was an error with, under SCSI and RAID controllers: "AP5NSJ1Z IDE controller"
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device.

So I reinstalled it. (By just uninstalling it thru device manager, and then add hardware, but it appeared just the way it was. I also don't seem to be able to use my IDE HDDs.

There is no group in device manager that'd include the DVD-drive.
 

A:Solved: IDE controller not working anymore!

16 more replies
Answer Match 45.36%

If I try to right click and do "new->shortcut" on either desktop or in explorer, nothing happens at all and I do not know why.

Posts on other forums suggest there is something wrong with how vista works with .lnk attribute but I cant make any sense of it. And I will not try out the registry hack that is suggested as I do not know what it does.

My only hope atm is if any of you are familiar with the very same issue and know a way to correct this behaviour.

A:Right click new shortcut is not working anymore

Ah, ok I found a post on this forum possibly about something similar, so I will try out the fix the next time I choose to boot my machine.

Changing Associations

I'll get back later on and tell if this suggested fix solved my shortcut issue.

6 more replies
Answer Match 45.36%

I recently bought a 2TB hard drive to backup all my old hard drives (3 320GB, 2 500GB, 1 200GB). Since all my sata ports were being used I decided to unhook one of my 320GB hard drives that didn't have many files to use its sata cable. Since I don't remember the physical location of all my hard drives I turned off my computer and unhooked one at a time till I found it. The new 2TB hard drive works perfectly so far. The problem is one of my 500GB hard drives has now been having serious issues after being hooked back up.

Just the other day I had done SMART checks on all my hard drives and they all were fine. My 500GB has never had any issues at all. It is probably pretty close to 5 years old. But at first it was causing my windows 7 to take an extra minute or so for starting up. It was being really slow at showing files on the 500GB hard drive. It would eventually open files after a couple minutes. I turned off my computer and tried a different sata cable and power connector. It still acted the same.

I tried running HD Tune but now the 500GB hard drive disappears from My Computer and Disk Management before I can run any tests. I would have run a CheckDisk too if I could. So I had my brother bring over his external hard drive enclosure and put it in that. It wouldn't show up in My Computer, but it would come and go in Device Manager. Then it started popping up errors saying it needed to be formatted now. Other than it sounding like it was spinning faster and the... Read more

More replies
Answer Match 45.36%

All my addons and themes stop working and I can't get them to work even if i try to download them again. They are all there, they just don't respond and I am having difficulty uninstalling them. Please help!!!

A:[SOLVED] Addons Not Working anymore!!!

did you just do the newest upgrade? sometimes when FF upgrades to a newer version, the addons/themes don't work until they are upgraded too.

4 more replies