Tech Problem Aggregator

Sims3launcher.exe- Configuration parser error

Q: Sims3launcher.exe- Configuration parser error

The last time i played sims 3 was last night. I fell asleep with it on and when i realized what happened i tried to save it and shut down. No actions could be done it was froze, so i restarted and tried to play again and got error

Error Parsing

Parser returned error 0xc00ce556.

I dont know ANYTHING about computers please help!!!

More replies
Answer Match 83.58%

System details;
OS Windows 7HP 64bit
CPU AMD Phenom II Quad
Motherboard ASUS M4A79-T Deluxe 790FX
Memory 12BG Corsair XMS3
Video card Sapphire ATI Radeon HD 4890
Boot disk C:\ Samsung Spinpoint 1TB 7200 SATA II 32MB
Tried to update Snagit 11 (build 207) to version 12.2.2 (build 2107) but when trying to install the update I get snagitup.exe-Configureation paser error, error parsing C:Windows|Microsoft.Net\Framework\v4.0.30319\config\machine.config Paser returned error 0xC00CE508
Would greatly appreciate any help 

A:Configuration Parser Error

Worth a look, Configuration Parser Error .

5 more replies
Answer Match 81.48%

I'm getting these two error messages towards the end of the installation of Impulse:
1: Error Parsing
RegASM.exe Configuration Parser error
Parser returned error 0xC00CE556

2: Error Parsing
Impulse.exe Configuration Parser error
Parser returned error 0xC00CE556

I've already tried a clean install and a reinstall of .NET Framework. Please help, this program is essential. Already tried compatibility mode, too, with no effect.

A:[SOLVED] Configuration parser Error during and after install

Addendum: Stardock support says this is not a problem with Impulse itself, and the Microsoft support system hasn't been helpful. Need third-party support; namely, this tech forum.

3 more replies
Answer Match 56.28%

First time poster, my apologies if there is fault in my etiquette.

I have a Windows theme program installed on my computer with custom Boot Screens and Windows Themes. I foolishly tried to update windows to SP2 while this was installed and active, running themes for XP SP1.

When my computer boots it attempts to enter windows, but does not display. It opens an error dialogue that reads,

Parser Message
Value Creation Failed " at line 30

I believe that this is due to the themes I had running.

So, my questions are:

#1: Is the Parser Error 30 related to Windows Theme errors?
#2: How can I fix this?

A:Parser error 30

Have you tried uninstalling sp2 via safe mode? Can you boot to safe mode?

6 more replies
Answer Match 56.28%

I was messing around with windows customation (download StyleXp) and such things as different boot screens and login screens. But then i realized that i shouldnt be messing with my boot screens so i restored it to the orignal one.

After a few days,it asked me to restart my computer for windows updates to be complete. When i pressed the prestart button, it didnt restart, so i manually shut the power off. Then, when i tried to start my computer up, i can't even log into my account anymore which means i cannot access windows or my desktop. right after the windows xp home boot screen i get the following error:

"parser message value creation failed at line 40"
There is a ok button and whenever i press it the message comes up again.


A:Parser Error...please help

if you can boot into safe mode ..try system restore..go back at least a week before the problem started

3 more replies
Answer Match 56.28%

System Specs:

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2h
RAM: 2038 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 140026 MB, Free - 72955 MB; D: Total - 9999 MB, Free - 5696 MB; F: Total - 238464 MB, Free - 197520 MB;
Motherboard: Dell Inc., 0U990C, , .DB0VPF1.CN7016687S01QE.
Antivirus: Norton 360, Updated and Enabled

I'm having a problem with The Sims 3 Launcher working. It seems that no one at The Sims Support, Dell, or Microsoft Help has been able to help me. I have all the games up to Ambitions and plan to get the rest soon. Everytime I try to open the launcher, it says TheSims3 Launcher has stopped working;Windows is searching for an answer (or something of that accord). Now Ive uninstalled and reinstalled and for a minute it worked, however after that it did not for some odd reason. If you have any questions or comments PLEASE don't hesitate to ask. I'm hear to answer your questions if you are willing to help me.

More replies
Answer Match 55.86%

Hello, I am trying to fix my girlfriends Sony VAIO. Shes running it on XP and according to her; she went to sleep with AIM open and running. I've never actually sat at her computer to know what kind of anti-virus software she has running. But she says when she woke up, her desktop had gone to strictly her wallpaper, as if explorer.exe had crashed and closed whatever programs she had open as well. Anyones normal reaction to this is just restart it. She did so, and before she can boot into windows or even get a chance to log in to her computer an error message pops up.

"Parser Error"

"Value creation failed " at line 903" (That " in the middle of the sentence belongs there)

When I try to boot in safe mode, recovery mode, debug mode, or any other one of the options at boot it doesn't get anywhere except to that error message.

Im assuming she got infected with a trojan, but she has a paper that she had finished and not printed yet on her computer. Anyone have any insight on how to A) Get to a console so I could atleast copy that file off her computer B) How to fix this?

A:Parser Error after reboot.

First of all, getting the file off the system..... If the computer has a floppy drive, download NTFS4DOS (direct download link) from Boot from this and it will allow you to copy the file to disk. If the file is too large, you may need to get a zip-style program onto the computer which can either compact the file or split it into separate chunks.

Secondly, getting the system working again. I would suggest running an in place upgrade. First of all, do you have an XP CD? Failing that, is there an i386 folder on the hard drive of the machine? If you have the CD, follow these instructions:
Insert the Windows XP CD into your computer's CD-ROM or DVD-ROM drive, and then restart your computer.
When the "Press any key to boot from CD" message appears on the screen, press a key to start your computer from the Windows XP CD.
NOTE: You may need to set the boot device priority in the system BIOS to get this to work.
You receive the following message on the Welcome to Setup screen that appears:


This portion of the Setup program prepares Microsoft Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

Press ENTER to set up Windows XP.
On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
Make sure that your current installation o... Read more

1 more replies
Answer Match 55.86%

When i hit the "Software" icon to see the list of my installed programes i get the following error message:

"Value Creation failed at line 472" in a simple message box with an ok button beneath it (screenshot in attachment).

if i use tweakpower ( some tuning tool) to display the list of installed programs everything works well .. so whats wrong ? why do i get this error msg??

A:Parser Message (error) ??

ok sorry i didnt search (found solution) .. close plz

1 more replies
Answer Match 55.86%

when i run a search i get the following message:-

config parser error

error parsing C:\WINDOWS\system32\URTTemp\config\machine.config

parser returned error 0X80070003

it continues the scan with no problems when i close the error message (norton ain't finding anything)

any idea's


A:Config parser error

There are two solutions, try typing SFC /SCANNOW (note the space before the /) if that doesn't fix it, try deleting the URTTemp folder(you might have to do this in safe mode).

1 more replies
Answer Match 55.86%

I currently have Windows 7 on my desktop PC.  It was preinstalled when my PC was purchased and I did not get a backup diskette. I was attempting to upgrade to Windows 10 and began getting  error 0xc00ce556.  I have tried "sfc /scannow
command," and the "Startup Repair" option with no success.  Is there anyway to download a version of Windows 7 to restore or repair the files that are corrupt?  I cannot upgrade until I get the problems fixed.

Larry Stoudemire

More replies
Answer Match 55.86%

I have installed Sims 3 on my computer, but every time I try to run it I get an error message; Error parsing C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\config\machine.config Parser returned error 0xC00CE556. Not sure what to do next!
Any help gratefully received.

More replies
Answer Match 55.86%

After running a full scan of Norton Anti Virus (2003) I received the error message below. I don't know what it means or if it has anything to do with running the scan. Can anyone help?

Config Parser Error
Error parsing C:\I386\config\machine.config
Parser returned error Ox8007003

I'm running XP Home SP1

Thank you

More replies
Answer Match 55.86%

Not sure if this is the right place for this or not, if not, I apologize.

I keep getting an error message. Originally kept coming up when I was on ebay, now happens randomly.
It is an error box titled: config parser error. In the box it says: Error parsin C:\WINDOWS\system32\URTTemp\config\machine.config parser returned error Ox80070003

Any help would be appreciated


A:Config Parser Error

I read a brief response toa simliar issue that state replace the file from your win XP/98 disk however Im not 100% on this one...

2 more replies
Answer Match 55.86%

Im having a problem with my control panel in windows xp pro.Just reciently when i have tried to access some of the things in the control panel an error type of message keeps popping up and it wont let me into the feature at all.
There is an attached file with this post that shows the error message that i keep getting,Im sorry but this is the best way i can explain it.
Hope someone can explain to me what this error means and how i can fix my problem.
Thanks in advance.

A:Parser Message Error...Help please.

You forgot to attach the error message.

3 more replies
Answer Match 55.86%

Good afternoon friends, thank you for allowing me to join this community.

I am trying to take a test as part of my requirements as given by the On-Line University
I am currently attending. Each question is multiple choice; I am required to choose one answer and click "next" to move to the next question, however when I click next I get this message:

sys.webforms.pagerequestmanagerparsererrorexception: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to response.write( ), response filters, httpmodules, or server trace is enabled. Details: error parsing near 'older1_update panel1 .

I am quite the computer novice where this error is concerened, I was hoping someone with a more formidable computer background might be able to help me resolve this problem.

Thank you in advance for any time and consideration you can offer.

Have a good day


More replies
Answer Match 55.02%

Hello there. I'm a total newbie when it comes to computers and I have a problem here that I cannot solve.

I keep getting the message on startup 'error parsing win#micros#net#framework#v2.0.50727#config#machine.config
parser net error 0 x 80070570

Also, a microsoft message says: sprtcmd.exe-Config.parser error

Background to this:
The computer had been going slow, with only 14g memory left on the C drive. I used Amoei partition assistant to expand the c drive which was successful. Since then I have been getting these messages. I had been trying to get rid of the errors, but don't seem to know what to do.

I have a Dell Inspiron 14
Windows 7
Intel Core 2 Duo ULV Processor
4GB memory; 320G Hard Drive

I hope you can tell me a) how to get rid of this error and b) how to get rid of the 2000 errors which the scan shows I have and I need to fix.

Thank you in anticipation.

More replies
Answer Match 55.02%

Hi all,

Could someone have a look here and let me know what they think? Spec of PC and Hijack This log is below.

I have two problems, no idea if they are related or not (not my computer). The first is when the pc boots up, it brings up 'parser error, line 173', I have to then alt+tab to get to it, press enter and it goes, but then there are six more after that.

The second problem is that the pc wont shut down or reboot from the start menu or any other program (virus-scan, installing, spyware programs, etc). It asks me what I want to do, shut-down, reboot, etc, but then nothing happens. The only way to do it is hold the button down.

I have done the virus-scan, spyware scans, uninstalling unecessary programs, ran all the tune-up utilities programmes and hijack this. Obviously I have missed something somewhere!

I'd be grateful if anyone could give me a pointer or two to fix this, getting really annoyed now and really dont want to do a full re-install of Windows!!


PC Spec - Windows XP sp2 (completely updated), Dell Dimension 1100 with 2.5ghz processoor with 512mb ram. AVG Antivirus, spybot and tune-up installed.


Hijack This log -

Logfile of HijackThis v1.99.1
Scan saved at 12:50:41, on 30/11/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16544)

Running processes:
C:\WIN... Read more

A:parser error/xp not shutting down or restarting

I am not qualified to read HJT logs, so I will not comment on the possible malware issue.

However, there are a couple things you could try. Try turning off the "Windows Indexing Service"

To disable the indexing service:

1. In the "Start" menu, choose "Run."
2. Type "services.msc" and press Enter.
3. Scroll-down to "Indexing Service" and double-click it.
4. If the service status is "Running", then stop it by pressing the "Stop" button.
5. To make sure this service doesn't run again, under "Startup Type:", choose "Disabled."

If you have "active desktop" turned on, turn it off
And right click the desktop - select "arrange icons by" and if the "lock web items..." is checked, uncheck it!

Tell me if any of these works for you

2 more replies
Answer Match 55.02%

I attempted to shut down (via hibernate) my computer from the Start button. Nothing happened for quite some time, so I clicked "restart", I waited and still nothing happened. I tried pushing the power button on the tower... no go. I had to leave, so I finally pulled the plug. Now it's giving the following error: After Windows(XP) boots, a little dialogue box appears with a title "Parser Message", and below it an error message reading: Value creation failed " at line 40 I click that 9 times, then a logon screen appears asking for a password. I click okay past the password and the booting completes. Please advise re what I can do to fix this. Thank you!

A:Solved: Parser message error

Looks like something got corrupted,have you thought about doing a repair? go here to find out how

2 more replies
Answer Match 55.02%

my computer won't shutdown normally i have to pull the cable so it shut off. then when i boot up evry is good until i get this message that says (parser Message Value Creation Failed At Line 45 ) i hit okay like some 10 time finnally the logon box appers with my user name and password box i just hit okay and i get into my window evarything works fine except the bootup and shutdown can anyone help i would be in your debt???? Hector P

A:i got a parser message error on bootup Need help???

8 more replies
Answer Match 54.6%


I have been having trouble with my computer....running slow...freezing up....phony pages. I did several scans MS essentials; CCcleaner; Malwarebytes: all came back with same results no virus detected however I tried to log in to my AOL mail and got this message

XML Parsing Error: unexpected parser state

I did review the forum but I don't understand it; can you please advise?

Thank you

A:XML Parsing Error: unexpected parser state

Welcome,lets run some scans review the logs and see how it is.Please Download TDSSkiller Launch it. Click on change parameters-Select TDLFS file system Click on "Scan".Please post the LOG report(log file should be in your C drive) Do not change the default options on scan results.ADW CleanerPlease download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.Double click on adwcleaner.exe to run the tool.Click on Delete.Confirm each time with Ok.You will be prompted to restart your computer. A text file will open after the restart.Please post the contents of that logfile with your next reply.You can find the logfile at C:\AdwCleaner[S1].txt as well.>>>>I'd like us to scan your machine with ESET OnlineScanHold down Control and click on this link to open ESET OnlineScan in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the
icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download update... Read more

8 more replies
Answer Match 54.6%

I have an XP Pro machine and I am not able to have my updates loaded. I am getting a parser returned error message (have been for at least 4 months) but I have no idea what I downloaded if anythign to get this error message. How can I get Automatic Update to run properly again. Seems to hang with .net Frame updates and now some of my applications are not working correctly. Suggestions?

A:Parser Returned Error message 0xc00ce556

8 more replies
Answer Match 52.92%

This wouldn't be so much of a problem if it weren't for large programs I have installed that can only be removed via ARP, but all of a sudden today, I get a popup when I click the icon in the CP. I've googled this problem and it's the first one I haven't been able to find a solution for. Other people have had errors at line 472, because of theme incompatibilities, but I'm using the default Windows XP Theme. Please help.

In general, I have had an infuriating experience with this specific installation of Windows, and that's not related to viruses which I've only had two of. I've tried reinstalling which is impossible, because my computer won't boot from CD or USB I could reinstall to another internal drive, but it can only have one of those. I'm thinking about using another computer to install Ubuntu on a drive and ripping out the other drive and dropping it in instead, but it would be a shame if it didn't work.

A:Solved: Cannot use Add/Remove programs, parser error at line 64, Googled, found nothing

Welcome to TSG...

Can you access ARP through the command line?
Press ctrl+alt+del to bring up task manager.
Click file, new task (run), and type appwiz.cpl and click ok.
Is the error message the same when you do that?

3 more replies
Answer Match 48.3%

I've researched this but it's confusing....I get that message and then "please reinstall Microsoft XML core services 4.0 v.2 or higher"

Can someone tell me EXACTLY the process for installing that stuff? I downloaded the stuff I was told to, but it's a lot of different files, not sure where to put them, or how to install them, etc.

It would be appreciated- thanks!

A:Solved: Nero 9 giving error message: "unable to create XML parser instance"

You need not worry about "where to put them" as any installation routine will automatically put the files in the right place.
You were directed to the wrong place so delete what you downloaded from there.

Now you just need to know where to get what your PC says it needs:

For Microsoft XML Core Services 4.0 SP3 go here:

Just click the download button to the right of msxml.msi (the first of the three download options).
You'll end up with just one file to deal with.
Double click that file to install.

That should fix the nero error, hopefully.

3 more replies
Answer Match 44.94%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?

More replies
Answer Match 43.68%

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
Just checked I may be right check the link below!

7 more replies
Answer Match 43.26%


Log Parser 2.0 is a powerful, versatile tool that makes it possible to run SQL-like queries against log files of almost any format and produce the desired information either on the screen, in a file of any desired format or into a SQL database. Log Parser is available as a command-line tool and as a set of scriptable COM objects.

System Requirements

This tool works on:
- Windows 2000 Professional
- Windows 2000 Server
- Windows XP Professional
- Windows .NET Server

Operating System - Windows 2000, Win XP



More replies
Answer Match 43.26%

i want to have a small on line bookstore. The publisher provides the data in xml form. This is great form me. can pick the titles I want, images etc.

BUT, I don't know how to get at the stuff. I wonder if you can recommend a freeware parse that will let me get the stuff into my own database (txt, or msaccess, or excel) whater works.



A:xml parser


Never used them myself, but take a look at some of these:



1 more replies
Answer Match 43.26%

recently i was clearing out space on my computer and im afraid i might have deletedt he wrong thing. everytime i log on to a user, a mesage will show that says :unable to load XML parser!" while the computer seems to be running fine, i just would like to know what to do about this problem. even when i click out of the message it is still there, so it seems like the computer thinks its a major problem or something. thank you

More replies
Answer Match 42.84%

When i try to op[en Add/remove programs in the win xp pro control pannel i get this error message in a small box and it wont open:

Parser Message

Value Creation Failed " at line 521
how can i fix it?

A:Parser Message

so noone knows?

3 more replies
Answer Match 42.84%

Hi Everybody,
Hope someone can answer my enquiry,

I have a generic parser lodged in history in IE 7.
If i delete it as soon as i reboot my computer it is back.
If you place the cursor on it shows a certain web page that i have not visited.
Web page is; htm

If you try to open it up all i get is a black page in Internet Explorer.
I did allow somebody to use my computer prior to finding this for a short period and as i am rather security conscious was wondering whether it is a threat of some kind and if so how could i remove it

My OS is Vista Home Premium.


A:Generic Parser Welcome to Windows Live Toolbar

Nothing serious to worry about - apart from the usual Micro$oft concerns

3 more replies
Answer Match 42.84%

I'll try to make this short even and provide the most information possible at the same time.

I'm running Windows XP with SP2.

I'm trying to install software provided with my Blackberry phone I just got. It is a Desktop Manager program that lets me link my Blackberry to my computer.

When I try to install the program it pops up a window saying that I am missing Microsoft XML Parser 6.0 as shown here:

Well I went to the MS update site to get this file which is a .msi file and I did. The problem is that you have to have a certain installer called MS Installer 3.1 in order to install it. Well I got the installer too but it won't install it or either I don't know how to use it.

There are 4 xml 6.0 files that I can choose from to download. I've tried each one and none will install. Heres a list of the files:


Back to the installer. The file name is WindowsInstaller-KB893803-v2-x86.exe and when I run that it says that the update has been installed. Now when I double click the msxml6.msi file it asks me what program I want to use to run this file. I can't choose the WindowsInstaller program because I don't know where it was installed and it never tells me. This leads me to drag the msxml6.msi file and drop it on to WindowsInstaller-KB893803-v2-x86.exe which ends up showing me this on my screen:

Through my research I've concluded that this XML 6.0 parser should already be on... Read more

A:XML 6.0 Parser Problems...

Nobody knows anything about a XML Parser? Is this thread even in the right section?

1 more replies
Answer Match 42.84%

I am running xp pro and my daughter was home over the weekend. Now I am getting a black screen and the following message:
parser message value creation failed at line 903

I sometimes can bypass it by hitting the ok button, but would like to get this resolved. Would a system restore be the answer. I dont want to do anything without some advise.
Thanks In Advance.

A:parser message

I would suggest a sfc /scannow. You'll need your XP CD.

1 more replies
Answer Match 42.84%

I'm not sure what forum to put this question. Please feel free to transfer to the right forum.
I ran logparser using the syntax below:
logparser -i:ads -o:csv -q:on -stats:off -objclass:user "select employeeid,description,company,displayname,samaccountname,mail,mobile,givenname,sn,initials,distinguishedname,manager,whencreated,
wWWHomePage, acctstatus using bit_and(useraccountcontrol,2) as userstatus, case userstatus when 0 then 'ENABLED' else 'DISABLED' end as acctstatus from 'ldap://,DC=com'"
> %year%%month%%day%_AD.csv

When I opened the file, I noticed that there on the query result is a user named zzstpp and ?zzstpp??
The user zzstpp I can find in ADUC but the user ?zzstpp?? I cannot find. Does ?zzstpp?? really exist? How did logparser come up with this?  How come ADUC cannot find this user?

More replies
Answer Match 42%

hi @ all,

First of all: Maschine is a XP Pro x64

Hardware works fine!

But, well i am having a problem for a while...
First i noticed, that suddenly my Windows update wasn't working anymore. This was kind of anoying but i didn't really care. After a while i found a solution (a dll was unreg) fixed it an was again able to update. In the middle of the update ie crashed (*surprise*).

But it seems it killed the whole msxml-parser with it!

I am not able to run any msc by giving them as arugment to mmc. (I can open it by just running mmc and the adding it as snipplett)
The msc files it self are ok, jugding from the xml-structure viewed with notepad.

Ok, I thought no big deal, just re-reg that dll by hand and i am done. I had to learn, that the dll file was so badly damaged that regsvr wasn't able to find its jumppoints.
**Nice one**

All right: run sfc /scannow and the parser is fixed. Well nope. Didn't work

Well i downloaded a fresh copy of the MSXML 3.0 Sp 5 Parser and installed it. No error during install anything worked fine. But somehow the parser isn't integrated into the system! No App can use it. (I have allready a std-procedure to test it: by trying to run win-update, by viewing a xml-file in ie and by opening the comp-mgr)

But now way. It doesn't matter which version I install, MSXML 4.0, 3.0 DEV-Versions; None of the works. But the "new" files are in the sys32 and SysWOW64 folders and seem to be ok.

Then I tried to make a c... Read more

A:MSXML-Parser really messed up...

Anyone!? Perhaps a hint?

1 more replies
Answer Match 42%

After a recent Microsoft automatic security update my Outlook 2007 crashed completely and I have had to reinstall it to get it working again and everythings seems fine now except for one thing.
When shutting down outlook I get a meesage window stating that I need MSXML 5.0 to be able to complete the operation and that I should run setup and repair, I've tried that but there is no improvement. I understand MSXML5.0 is bundled with Office 2003 but I dont have that installed on my laptop.What do I need to do to stop this message, or can I install MSXML 5.0 from another source so that whatever wants it can access it and complete it's operation. The other annoying thing about this is that it doesn't happen everytime I shut down outlook, it is quite intermittent.
I have exactly the same setup on my PC and and that doesn't have MSXML 5.0 either and it works perfectly well.
I've also disabled automatic updates altogether now.
Has anyone got any suggestions how to rectify this please.

More replies
Answer Match 42%

Problem is this... I installed Photoshop a few days ago and all of a sudden I'm not able to open .eps and .ps files. I can open the same files in any other program that supports those file types. I was able to create and open the files probably ten times after first installing the program. The error message that pops up tells me it can not parse the file and that there is something wrong with the parser module.

Been through Adobe Knowledge Base, Adobe Tech Support (telephone), the office alpha geek, and anyone else I know who knows two operations in Photoshop. I've downloaded 6.0.1 and a new .eps driver. The instructions from the internet for this problem are USELESS because the files they want me to change don't exist (those instructions being to change the size of the clip board).

There is no other option for the file type unless someone knows of another extension that will give me vector quality images in Photoshop..

More replies
Answer Match 42%

Sorry if this has been addressed before, but I'm having no luck with what ought to be a simple task.
I'm analyzing RDP traffic and there are errors in the parser.  As a simple example, in RDPESC.opn at line 2013, True is defined as 0 and False is defined as 1.  Clearly wrong.
I edited the file, reopened MA and I get nothing.  Seems that I have to delete the cached assemblies in order to get the .opn to recompile, and I do see a "Recompiling module assembly RDPESC" message in the output pane.
However, I still see the incorrect True/False in a new trace.  So I purposely introduced an error in the .opn file (unterminated string) and I don't see any compiler error messages.
How are the opn files compiled?  Most are quite complex, and I can't imagine that developing a parser requires stopping MA, deleting the cached assemblies, starting MA again, etc. ad nauseum.  Surely the compiler produces error messages.  Something
this simple shouldn't be this difficult, so I must be overlooking something.

More replies
Answer Match 42%

Ok, i have an Apache Server running on my computer which also has PHP5 built into it

However sometimes i like to put my site on my Flash Drive and edit them on other machines

So what i want to know is whether anyone knows of a PHP Parser that snaps into IE so that i don't have to wait till i get back to my computer to test my scripts?

More replies
Answer Match 42%

I just bought the Sims 3 ; brand new and unused . I popped it in ; and it installed . . . I thought everything was fine , but then usually at the end of every installment of any game it would say launch game . But it didnt ; so i went to the folder and i clicked on the application . A window popped up saying

Sims3Launcher.exe - Configuration parser error

Error Parsing

Parser returned error 0xc00ce556

I tried uninstalling over and over but it wont work ;
PLEASE help . . .

A:Sims 3 Parser errors .

Hi I just thought I'd let you know I've had this and just this second successfully fixed it!

The thing that was causing this error on my XP PC was that the microsoft.NET framework wasn't updated to Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86. As soon as I did this it worked fine

Good luck!

PS. I had issues trying to update this as it kept failing so try if you get that error. (I have basic knowledge of computers and although I had a tech friend on standby I pretty much managed it myself)


1 more replies
Answer Match 42%

Anyone know how to get PS to open/read an eps file when it tells you that it no longer can because the eps parser module can't do it? Thanks Iratei

A:Photoshop eps parser module

Is the EPS undamaged?

1 more replies
Answer Match 42%

I am running Vista and need the plug in EPS parser. Been unable to locate - old program - but a good one. Suggestions? Thx

A:adober photodeluxe B.E. need EPS PARSER

Good luck with getting it to work with Vista. The program is getting older and older. I still use it with XP though.

3 more replies
Answer Match 42%


My 10 year old computer started acting up when it goes into and comes out of standby mode. It gives me an average of about 7 error messages, titled "Parser Message." In the body, it says it cannot create something at line ---. There are no performance issues, but half the times I put it into standby, I have to click through all the errors before it actually turns off. Same with its start up from standby.

Any help?

A:Standby Parser Messages

Download Autoruns for Windows: installation required.Simply unzip file, and double click on autoruns.exe file to run the program.Go File>Save, and save it as AutoRuns.txt file to know location.You must select Text from drop-down menu as a file type: Attach the file to your next reply.Compliments of Broni

5 more replies
Answer Match 42%

Windows XP Home
IE6/Firefox 1.0

I'd like to know more about...MS XML Parser 3.0 Service Pack 5 (SP5)
...and exactly what it does or could do for me.

A Search of my computer shows I now have MS XML parser for Java v1,0,9,2.

The reason I ask: because of a program I installed.
The Font on certain pages/windows changes inexplicably and annoyingly
from normal Font to BOLD Font after the program runs for 3-4 hours.
Before 3-4 hours all stays normal.
Also, hovering/moving my cursor over the Bold Font changes it back to normal but
in a few minutes it will return to this odd activity.

A few others in the Program's Forum I visit have also complained about the same
behavior, however, the Forum Moderators/Admins do not have an answer or a solution.

I've been investigating what could be the cause and have come to the subject of the XML Parser
which may or may not have any connection.

What does it do?

Should I download the new version?

Could it have any affect on the font behavior I mentioned?

Thanks for any help,


A:Microsoft XML Parser (MSXML)

Back to top

1 more replies
Answer Match 41.58%

hi guys im wondering if anyone can help me i cant open my add and remove programs i get a messege box parser creation failed at line 521 , can you help me to fixx this please , im a novice so im throwing my self at youre mercy ,many thanx guys

A:parser messege failed at line 521

Are you trying to Add/Remove a program? If so, what program?

6 more replies
Answer Match 41.58%

Hi all,
I registered a ETW Provider with EventRegister.exe and now , I need to make a OPN parser for this events, Someone knows how I could it??
Thanks for all!

More replies
Answer Match 41.58%

Hello friends - I'm in trouble again.

I'm trying to run Windows Update (got the Sasser thing) but am told to install XML Parser (MSXML) 3.0 Service Pack 4 (SP4).

I locate it to this link
I click on it and chose Open. Then I get this error message: "The system cannot open the device or file specified. This may indicate a problem with this package. Error 2755."

So I can't install the service pack, meaning I can't run Windows Update, meaning I can't fix the hole that's allowing Sasser to do evil things to my computer. How do you say in English; caught between a rock and a hard place?

Pleease advice me! I'm really lost here. Many thanks, /swedish_girl

More replies
Answer Match 41.58%

I need to find the code for a parser written in C/C++. The parser should generate GNU assembly code for simple math equations. They are defined by this CFG.

S --> identifier ( = | += | -= | *= | /= | %= ) S | A
A --> A ( + | - ) M | M
M --> M ( * | / | % ) P | P
P --> identifier | integer | ( S )

I know there are sites out there with different codes, but I don't really know my way around them. I was hoping someone out there could reffer me to one.

More replies
Answer Match 41.58%

i have just clean installed WIN 7 Pro 32bit. Windows is genuine down Loaded via MSDN. laptop is VAIO VGN-FZ11Z. I have not installed any of the drivers yet.

right now window is just flagging for 2 things

1- driver for sony firmware parser which im not finding anywhere on Sony Europe website as this model is EU. help me to find it plz

2- Address a problem of taxes instrument PCIxx12 flash media reader (driver is located by windows)
im quite naive, kindly guide me , should i need to install other sony drivers like chipset etc or not, and how.

one more thing, after clean installation of windows it is giving to many validation errors and application crashes. it happens mostly on launching of applications or setup files. I am confused why is that. here are snaps of below of and also device manager

A:firmware parser driver for fz11z??

Hi there
Go to the SONY ASIA site -- loads and loads of SONY drivers there (and in English).

this is a link to my VAIO stuff but you should find all the other info for your model -- look on the bottom of the computer case to see your model type.

Original Drivers and Applications for VPCEH/EJ Series (Windows 7 64-Bit) : Download : Sony Asia Pacific


5 more replies
Answer Match 41.58%


This is the first time here for me, have searched the forum and could not find an answer to solve my problem, maybe I have overlooked it.

Here is the problem, when I turn my computer on I get this error message.

CPU = Intel (R) Pentium (R) 4 CPU 2.00GHz
639K System Ram Passed
638M Extended RAM Passed
512k Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed
Mouse initialized
0162: Configuration Error - Default configuration used

Press F1 for Setup
If someone could give me some guidance it would be greatly appreciated, the operating system is Windows XP Pro.

Thank you

A:Configuration Error

7 more replies
Answer Match 41.58%


I just re-installed windows XP pro on my dell pc,and when i come to switch on the machine ,i get a message before startup saying invalid configuration information.
I have to wait and then it starts up. It has also reset the time and date.

The battery inside was fine before i wiped it-could it be the BIOS ?

Any help would be very welcome
Thank You

More replies
Answer Match 41.58%

When I try to run SPSS which I recently installed it receive an error message stating that the application can't run because of a configuration error. Can any one help with this? My professor was telling me what that meant and honestly really freaked me out.

A:Configuration Error

It simply means that it didn't install properly/completely...for whatever reason. It's not set up properly for use.Program settings are configured (usually) after install...or using the default settings.Google LinksLouis

1 more replies
Answer Match 41.58%

when i try to start a game it says it cannot
open the configuration

More replies
Answer Match 41.58%

using windows xp on my presario sr1103wm i ran the recovery in the pc repair program and after it restarted all i get is this error message has detected a configuration error (code purple) and the computer is non-responsive help

More replies
Answer Match 41.58%

I have an HP pavilion A6303w,every I tried to booted it.It always come with a message stated configuration error code purple...It's a windows vista desktop..I even try to change the windows vista to windows xp..As soon as I insert the cd in the drive,it started downloading just fine.As soon as it started to set up the windows it stop..And come back with that message configuration error..Please help thanks.

A:Configuration error.

I have never seen something give an error message "code purple". Maybe it is a BIOS error message? Do you see that "code purple" as you boot the machine or would Windows start running and give you that error ?

2 more replies
Answer Match 41.16%

I am a full Linux system.

I have both MS Excel and Libre Office installed. Yes, it could be the programs fighting, but I do not think so as I uninstalled one and reinstalled the other and vice versa, in an attempt to find out which if either was causing the Parser error on incoming and outgoing documents. Problem remains no matter which program I use.

Not new to using Excel. New to parser error on incoming and outgoing .xcl documents. Looked up meaning, deals with formatting of sheet/pages. Reformatted document, still have problem.

I've tried what I know. What do you know that I don't know?

A:Parser errors in MS Excel and Libre Office

I am doing a fresh reinstall of both apps, might be updates I missed along the way that takes care of this problem. I don't use spreadsheets that often but they are integral to what I do when I need them.


1 more replies
Answer Match 41.16%


The Microsoft® XML Parser (MSXML) 3.0 SP4 release offers a number of bug fixes and security fixes over the previous MSXML 3.0 SP releases. All MSXML 3.0 releases provide:
Server-safe HTTP access
Complete implementation of XSL Transformations (XSLT) and XML Path Language (XPath)
Changes to the Simple API for XML (SAX2) implementation, including new SAX2 helper classes with even higher conformance with World Wide Web Consortium (W3C) standards and the OASIS Test Suite.

Release Notes
MSXML3 SP4 Release Notes

System Requirements
Supported Operating Systems: Windows 2000, Windows 98, Windows ME, Windows NT, Windows Server 2003, Windows XP

To install the MSXML SDK, you must have the Microsoft Windows® Installer 2.0 (MSI 2.0) on your computer. If you are running Windows NT® 4.0, Windows 98, Windows ME or Windows 2000 (RTM, SP1 or SP2) you need to upgrade to MSI 2.0. If you are running Windows 2000 SP3 or higher, Windows XP or Windows Server 2003, you already have MSI 2.0.
Download Windows Installer 2.0 Redistributable for Windows NT 4.0 and 2000 or Windows Installer 2.0 Redistributable for Windows 98, and windows Millennium Edition.

Windows Server 2003 already has MSXML 3.0 SP4. If you have Windows Server 2003, you do not need to install this release.
All applications using MSXML3 should be closed before you install this SP.



More replies
Answer Match 41.16%

There is another post with this Title which is flagged as resolved but no solution was posted, i have the same problem

A:Sony Firmware Extension Parser problem

6 more replies
Answer Match 41.16%

Many of these IDS warnings in router security logs in the last few days, in specifics does anyone know what the different codes mean : i.e what the { S.A.U.P} {F.R.P} {F.A..} and {S.ARUP} that appear as the only differences in the attempts mean?. An explantiion of what is being attempted would be really helpful.Thanks. 06:11:38 29 JunIDS proto parser : tcp null port (1 of 1) : 81.xxxxx 0060 TCP 0->0 [S.A.UP] seq 3029953125 ack 0 win 8004:41:27 29 JunIDS proto parser : tcp null port (1 of 1) : 81.xxxxxxx 0060 TCP 0->0 [.F.R.P] seq 3029953125 win 8003:05:55 29 JunIDS proto parser : tcp null port (1 of 1) : 81.xxxxx 0060 TCP 0->0 [.FA...] seq 3029953125 ack 0 win 8002:56:43 29 JunIDS proto parser : tcp null port (1 of 1) : 81.xxxxxx 0060 TCP 0->0 [S.ARUP] seq 3029953125 ack 0 win 80

More replies
Answer Match 41.16%

Howdy! I'm Slingblade. Nice to meet you all.

When I got up this morning and tried to open a Word document, the program had a fit. Best way to put it. It was working fine last night. Today, the prog would try to open, then I'd get a Microsoft error report. So I'd send the report, and the prog would try to open again, but I'd get another error report. Everytime I'd send, it would try to open again on its own, over and over.

I chat at the JREF skeptics forum, and they have a link to a parser for HiJack This logs, but the parser said I had HTML code in my log that didn't belong and it couldn't open the file.

Can anyone help me? I think I've been taken over by BHOs and Toolbar pirates. Here is my HJT log, and thanks in advance for any help!

Logfile of HijackThis v1.99.1
Scan saved at 10:14:02 AM, on 3/23/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Lexmark X1100 Series\lxbkbmgr.exe
C:\Program Files\Lexmark X1100 Series\lxbkbmon.exe
C:\Program Files\J... Read more

A:WINWORD disabled--HijackThis log unreadable by parser!

The problem is with QuickTime. It won't uninstall, and it's taken over everything. When I try to uninstall it, through control panel, it's own uniwz, or any other way, I get this message:

DLL function call crashed QTInstallCode QuickTime Terminate Proc

Please, can anyone help? Please?

2 more replies
Answer Match 41.16%

I got this error after I did a Compaq System Recovery.
Your system has detected a configuration error. Please report this error to Customer Care using the phone number found in the Warranty and Support Guide that came with your PC. Unless corrected, this error will prevent your PC from operating properly. Turn off your PC by pressing and holding the Power button. After a few seconds your PC will automatically turn off. (Code Purple)

More replies
Answer Match 41.16%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB

More replies
Answer Match 41.16%

Hi, I am actually trying to configure a router, with a serial and fast ethernet interface..
now i have a network address of and i have used for the fast ethernet interface and for the serial interface, but it giving me an error, saying its overlapping the fast ethernet address of, is there anything i'm doing wrong there? can anyone help me please...

A:Hi everyone i have router configuration error...

6 more replies
Answer Match 41.16%

Hello there. I hope I have posted this message in the right area. This morning I fired up my pc to find an error greeting me. It was that windows was missing a configuration file. I rebooted a couple of times then it came back up.

Once it did tho, it went through reloading all my hardware. Everything was fine so I thought. I then realized there was no sound. Xp is showing the Realtek onboard sound card there, indicating under Audio Devices, Properties that "This device is working properly" and "Driver is enabled but has not been started". However, under the main Volume tab it shows "No Audio Device".

I have verified under Services that Windows Audio is started and running (set to 'Automatic'). I have attempted to remove and resintall the device, tried alternate drivers, all to no avail. Any suggestions or recommendations on how to proceed would be so greatly appreciated!

A:Configuration no sound.

7 more replies
Answer Match 41.16%

I'm using Win 7 ultimate 32 bit. I've a problem when configure DNS. I enter Local Area Connection Properties then click on Internet Protocol Version 4 but it show a window and disappear.

It like this video:

Who can help me, please?

A:Error! can not set up TCP/IP configuration on Win 7 ultimate

Can you access it in safe mode?

9 more replies
Answer Match 41.16%

Hi there guys.

One of my applications, Microsoft Flight Simulator X was working normally for awhile until I encountered a problem where it says the application could not start because its side by side configuration is incorrect. I cleaned everything up by doing "sfc /scannow" in Command Prompt and it solved the problem.

However, when I tried to open up Microsoft Flight Simulator for the second time, the error occurred again. Can I please help some advice on how to stop this re-occurring problem?


A:Sidebyside Configuration Error- NEED HELP!

It will take a little while, but I will refer this to our forum specialist in this area.

9 more replies
Answer Match 41.16%

I'm on ADSL Zoom X3 modem connected to my PC with No other Router connected

when I used a bittorrent for the 1st time (Azureus), I got NAT error problems, this happened to everything I tried.
It tells me I have no remote access & icons stay on yellow?
I checked all the wizard configurations & whatnot, they all told me I have a NAT error

I just want to know if theres anything I can do? because when I switched to my AOL 56k connection, the NAT error was not present there
SO is my NAT messed up or not set up correctly???

I don't have a router so I can't open any ports only on it,
I'm only with my DSL modem, so I went to my DSL setup page

the screen had this info:

NAT : Enable
Mode: Dynamic

Session: blank (no other options listed but can be typed on)
User IP: blank (no other options listed but can be typed on)
Action: add (& another option for delete)

Number | Session | Name | User IP
# of NAT configurations: 0
I tried switching to disable NAT!
the description makes it seem like hackers can get to my IP & whatnot without it, but I tried anyways, BUT I could not connect to the net anymore after that, I had to re-enable it.

All I know on on Azureus is that in options it states 6881 as the incoming TCP listing port.
there is no Session or User IP info there to find & typing 6881 on User IP just tells me it's an inncorrect IP
can anyone help?
anyone with any knowledge of this??
is it poss... Read more

A:can ANYONE help me with a NAT error/configuration problem??

the other options on my dsl setup page other then NAT are:

WAN settings
LAN settings
Virtual Server
ADSL Configuration
Route Table
Misc Configurations
Bridge Filtering
RlP Configuration

are any of those helpful to open the 6881 port?

1 more replies
Answer Match 41.16%

Immediately after upgrading to IE8, a Wireless Configuration error message began appearing and will not close even when I reboot my Acer Aspire 5600. It reads as follows:

Incorrect MFC Dll version installed on system, minimum requirement is MFC SP4 dll.

I located an answer from Dell for their computers in these Forums, but can't find anything here for Acer. Any help would be appreciated.


A:Wireless Configuration Error

do you have a service running called Broadcom Wireless LAN Tray Service
control panel> admin tools> servive

3 more replies
Answer Match 41.16%

i had the sbc yahoo utilities on my comp with the browser and chat and little things like that and then i uninstalled it and tried to reinstall it and now i get an error half way through saying can not configure to my comp??? howcan i fix this???

More replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.

Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?
Edit/Delete Message

A:Registry Configuration error

Yes this was copied from another thread. I posted it in the wrong place

2 more replies
Answer Match 41.16%

ok heres the prob...
today my nephew was playing sims 2 and while he was playing he hit the shelf the tower was fell less than 2 feet and not very hard since the cords slowed its fall...
now when i go to restart it i get this errors:

0162 configuration error
no dhcp or proxydhcp offers were recieved
1962 : no operating system found

im not sure what has happened or what I need to do now.
I was reading online and it said run setup but not sure what that meant.

A:0162 configuration error

Run setup probably means run Windows setup. But i think i may know what is wrong. Can you check the hard disk IDE cable, make sure both connections at either end of the cable are securely fixed into their sockets

2 more replies
Answer Match 41.16%

I have Windows Me and when i try to boot up i get this error.

Cannot find System.ini.

Boot with emergency boot disc and type scanreg/restore

WHAT Do i do?? I dont have the boot disc. I have another computer with xp and if i need to download a file i can. Any help?

A:Registry Configuration error

Take your system to someone who can test your hard drive and reload Windows Me for you

2 more replies
Answer Match 41.16%

Hey there,

I'm on windows XP

when it comes to installing many new applications (not pirated or anything) I get this error


This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."

It has happened both for the new MSN (Im stuck using windows messenger) and Ableton Live 8.03

I've obviously tried reinstalling a whole bunch of times, but no luck. Is my only option here reformat, could it be something viral? Or something more simple (i hope!)

Cheers and thanks a lot

A:Application Configuration error (XP)

8 more replies
Answer Match 41.16%

Friend has and HP a535w that is producing an error, machine boots up until the XP media center splash screen and then an error box appears:System Configuration ErrorThe system has detected a configuration error. Please report this error to customer care using the phone number found in the Warranty and support guide that came with your PC. Unless corrected this error will prevent your PC form operating properly.Turn off your PC by pressing and holding the power button. After a few seconds your PC will automatically turn off. (Code Purple).'i searched google and the only thing i could find that this had something to do with "tattooing" the recover to the motherboard, and a workaround was to attach the HDD to a usable system andopen up C:\hp\bin\ConfigCheck\cfgchk.bat with notepad and modify the section that checks to see if the hard drive is tattoo'd to have it not bother checking at all. (although the hard drive will be running as slave so replace the C:\ with whatever drive letter Windows assigns it) The line to remove is: "python c:\hp\bin\ConfigCheck\". This worked great for me and I hope it helps anyone else who comes along this thread as an alternative to dealing with tattoo'ing the motherboard or hard drive. i did this and cannot find the .bat file, that path does not exist.this machine is out of warranty and we do not want... Read more

A:HP system configuration error couple of pages into this thread seem to have several fixes.

4 more replies
Answer Match 41.16%

I'm having this issue

TCServer.ext - Configuration Error

Unable to load Jit Compiler (MSCORJIT.DLL)
File may be missing or corrupt
Please check your setup or rerun setup!

Basically when I did a google search I came up with this patch for what everyone says is a memory leak.

This didn't solve my issue.
The actual issue is that this error comes up as soon as I log into windows and either freezes me straight away or resterts.

- Version of the OS. XP Tablet Edition
- Security Patches - Unknown. I can't use the tablet long enough to check
- If the OS produces an error, either upload a screenshot of the error message (ALT+PrtScrn), or literally quote See above
- Were there recent crashes that could have caused this problem?Unknown
- Did you install new software recently? If this is the case: Which software? (Brand, version, build)Unknown
- Did you do any of the following:
- Run a scan with an updated anti-virus program?No, can't
- Run a scan with an updated anti-Trojan program?No, can't
- Run a scan with an updated root kit detection program? (This only for Windows NT, W2K and newer!)No, can't
- Run anti-spyware scans with at least two freshly updated anti-spyware programs? No, can't
If any of these program found something, provide us with the information on what it/they found. N/A

More replies
Answer Match 41.16%

I have tried everything but everytime I boot up my computer I get this hardware configuration error any suggestions on what I should or can do?

A:Hardware configuration error

What operating system do you use, and what is the brand and model, or configuration of your computer. What tasks are you running when you get the hardware configuration error... or does it even boot.
Tell us as much as you can, so we can imagine what you are up against.

3 more replies
Answer Match 40.74%

The basics:

P4 Dell Inspiron 8400
Fresh install of XP Pro slipstreamed with nLite to include SP3, updated after install.

The problem:

I can't open Add/Remove Programs
iTunes opens with message that certain components are iPod is recognized and it displays "synchronizing" but new content does not transfer over to iPod.

I have already looked up Microsoft KB article for the line 410 error regarding the shellstyle.dll. I have also performed an sfc from the command line. I've also tried unplugging all non-essential items from my rig (only left mouse & keyboard) and that didn't work either.

Did i remove something I shouldn't have in the slipstream? I have loaded my original disc to load missing components, but still no luck. Thanks.

More replies
Answer Match 40.74%

i installed custom themes like vista style on my pc which is working properly..
but when i got bored and i wanted to switch it back to original theme, i tried to set it to windows xp default, and it reversed back to original theme "BUT" most of the icons are still vista style.. its like mixture of xp and vista themes... the problem is, sometimes when i "log off or stand by" my pc i received this parser message "valid creation failed at line 12" and sometimes when i shut down my pc nothing happens... even though how many times i click "shutdown" button, even if i wait for 10 hrs it wouldnt shutdown. And sometimes i can shutdown my pc properly....
Help me pls... ty

More replies
Answer Match 40.74%

Ok.  So this is a bit of a tricky one, and I would sincerely appreciate anyone's input.  I manage some rental properties and use a management software called Lodgix.   One of the main features is that we are given a unique email address '[email protected]' where we can direct all of the inquiries that we receive from VRBO, HomeAway, FlipKey, etc... and parses them, databasing the information into our cloud-based management software and forwarding a newly formatted email to our email account. 
This had been working just fine for months.  However, today when an email came through the '[email protected]' address and was processed and forwarded to our email, everything began going haywire and we began receiving a duplicate of that email every 5 mins.  Since then, any email that is processed by and sent to our business account is also stuck in a loop.  It is an absolute train wreck because the software company is saying that it has nothing to do with their servers and that it is on our end and there is nothing we can do about it.  
However,  I have changed the email account that Lodgix send the newly formatted inquiries to and no matter what email address it is, it begins to get the looped emails every 5 minutes.  
Below are two tracers from identical emails sent to Lodgix's parsing address "[email protected]  They are both notifications sent from VRBO that were originally se... Read more

A:Emails Sent through parser stuck in loopback flooding accounts

Perfectly fine email with exact same content from exact same source sent a few days ago:
1. Entry (Line 10): from (localhost.localdomain []) by (Postfix) with ESMTP id 371A7A589BD for <[email protected]>; Thu, 20 Feb 2014 03:56:45 -0800 (PST)
Sender: localhost.localdomain
Sender Host Name: localhost.localdomain
Sender IP Address:
Sender (from):
Received By:
Received By (Ext.): Postfix
Received With: ESMTP
Receive Time: 02/26/2014 06:49:31 UTC
Receive Duration: Not available
Received For: [email protected]
Notice: The IP address of the sender ( is not a public address.
Notice: The sender and/or the recipient seems to be from a non-public network.
Notice: The host names are the same.
2. Entry (Line 9): from ( []) by (Postfix) with ESMTP id 3AE41BF25C8 for <[email protected]>; Thu, 20 Feb 2014 03:56:45 -0800 (PST)
Sender Host Name:
Sender IP Address:
Sender (from):
Received By:
Received By (Ext.): Postfix
Received With: ESMTP
Receive Time: 02/26/2014 06:49:31 UTC
Receive Duration: 0s
Received For: [email protected]
Notice: The IP address of the sender ( is not a public address.
Notice: The sender and/or the recipient seems to be from a... Read more

1 more replies
Answer Match 40.74%

I'm downloading the AWS VPC flow logs as documented here:
I wrote a PowerShell script which download the flow log events to a text file. Here are a couple of example events:

2015-09-22T04:00:25 2 533820197211 eni-44014f6f 55361 53 17 1 71 1442894425 1442894485 ACCEPT OK                                        
2015-09-22T04:00:25 2 533820197211 eni-44014f6f 3389 42027 6 2 112 1442894425 1442894485 ACCEPT OK                                        

I created a custom OPN following the "OPN Configuration Guide for Text Log Adapter v2" guide. My .config looks like this:

// LogEntry - This is the Message Definition that is c... Read more

More replies
Answer Match 40.74%

Our work got rid of a few laptops, and i brought a Sony VAIO VGN-BX61MN
The condition was we got rid of Vista Business and put a fresh system on it, which i got a friend to do (put Vista home premium on it).
Now in Device Manager, i have an unknown device. In its properties all it mentions is Location on Intel(RICH8M-LPC interface controller 2815
I have gone to the Intel site, and run the driver update there, but it discovers nothing and says all is fine.
I have run DriverMax (which i am a paying member) and that says, all is well, nothing Unknown.
If i try an update or reinstal from within Device manager, in the end i get 'Sony Firmware Extension Parser is missing a driver'.
I can not seem to find it anywhere.
Can anyone help please

A:Solved: Sony Firmware Extension Parser problem

I have done a fresh install again of Windows Vista Business, as that is what it had on it originally.

Still, the one driver missing is Sony Firmware Extension Parser......if i knew what it did (or doesnt do lol) i may not even worry about it.

2 more replies
Answer Match 40.74%

I just reinstalled XP Professional on a year old Acer laptop and am suddenly getting various Parser file errors as well as "failed to create empty document" errors. This occurs during just about any operation I attempt to execute on the computer, even when trying to access device manager. From what I've learned about these errors it has to do with MMC but I haven't been able to find out what to do to fix the problem. If it would be best to reinstall XP again, I don't mind but what has caused this to happen in the first place?

A:Parser & failed to create empty document errors

I'm guessing nobody knows the answer to this since my question hasn't generated any replies or even that many views for that matter. Oh well, thanks anyway, guess I'll try somewhere else.

2 more replies
Answer Match 40.74%

Trying to add/remove programs in control panel and get Parser message Value creation failed " at line 17. What does this mean?

A:Parser message Value creation failed " at line 17

Welcome to TSF....

Give this a try and you might need the system disk for this:

I actually tried this for the very same issue:

1.) Boot to the recovery console

2.) type fixboot and/or fixmbr. just press "y" and enter to proceed.

3.) typed exit and rebooted.

4.) It actually fixed the problem.

I hope it helped you.

1 more replies
Answer Match 40.74%

I have a laptop that on my wireless school network would connect fine and automatically. The network is a guest network so it is unsecured. I recently had to reinstall the operating system on my laptop to fix several access rights errors and others (reinstalled Vista). After the reinstall I am having a lot of trouble accessing the internet on the school network. The network and sharing chart will occasionally show that I'm connected to the public network and it will also go all the way through to internet access but my pages wont load and I don't have connection (I use google chrome as my browser but thats not the issue).

I've tried:

-Pinging common websites, it comes back and tells me that I have entered the name wrong which is odd.
-Restarting my computer
-Restarting my laptops wireless adapter
-Checked wireless connections at my house and at other network in my computer engineering class, all of which give me full access to the internet.
-Check DNS information I get a DNS error from doing a diagnosis(this I may not have done right so more information would be great). The diagnosis says I can't connect to common dns server
-When it says I have internet and I go to a page I get a error about not being able to resolve the server
-Disabling DNS prefetching
-My own IP is pingable which is normal.
Hopefully I can get this fixed soon because several of my classes are online classes at school which will end up forcing me to do a bunch of ... Read more

A:Solved: A sort of DNS Configuration Error?

11 more replies
Answer Match 40.74%

Hello! I installed HP BCU because i want to do stuff with my computer. You know... Anyways, every time i start it, it stays open for like half a second then closes. I recorded it, and at the end it shows the message: "<Warning> msg="BCU return value" real="17" translated="17" />" That is what it says right before it closes. Please help me. Thank you for your time, and have a great day!

More replies
Answer Match 40.74%

My Father-in-Law brought over the computer we gave him for Christmas and said it was not working. I started it up and got this message "your system has detected a configuration error. Please report this error to customer care...blah blah" I tried a system recovery but it had no effect. I tried clearing the cmos and that had no effect either. I tried using the recovery cd's that I made for it and got a message saying the cd's were not for the correct model?!?!?! What is going on here?

PC Info:
HP Pavilion a430n
XP sp1

Any help would be appreciated, Thanks in advance


A:Solved: Help with System Configuration Error

12 more replies
Answer Match 40.74%

Hi Guys,
I have recently installed windows developer preview, since installation I'm facing a problem while Outlook configuration.

after done all things when i test account setting it shows "log onto incoming mail server ERRR X fail"
Please guys help me regarding this

More replies
Answer Match 40.74%

Received error message:
Windows Boot Manager
An error ocurred while attempting to read the boot configuration date.

The instructions are to insert the Windows disk and restart the PC, however I can't get past this screen. When I restart I end up on the same screen.

How can I get past this error screen?


A:Boot Configuration Error Screen

Try following these steps. an error occurred while attempting to read the boot configuration data (Vista)

5 more replies
Answer Match 40.74%


also, each time i start the computer, there is the following message - error failed to load branding configuration -. couldn't find anything on the web. What could it be ?


A:error message branding configuration

You really shouldn't duplicate post, if not for the integrity of the forum, then so that everyone knows what you are being told and you will not be pulled down two or more pathways to a fix, yano. but no foul, no harm, just acting on your behalf (and SF's)


1 more replies
Answer Match 40.74%

I was trying to repair a software installation (Iomegatools) by removing and reinstalling this software. My system froze after the installation and I shut down the computer and tried to restart Windows XP. On restart, I get a black screen with white type indicating I have an invalid system configuration. It suggests I run Setup to input the correct date and time. When I get past that it starts to load windows XP but freezes on a blue screen with the Windows XP logo but no User logon information. Any suggestions?


Jon B

A:Invalid System Configuration Error

Have you tried to start the machine in safe mode and use XP system restore yet?

7 more replies
Answer Match 40.74%

I can not get past the disk config
the error I get is: Windows could not set a partition to active on disk 0
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm=""
        <component name=&quo... Read more

More replies
Answer Match 40.74%

I have previously been able to print an email in Windows Live Mail. I can print Internet pages and saved documents. Brother Printer support suggested I have a configuration error.

Any suggestions?


A:I have a configuration error that is preventing me from printing.

If you can still print from other applications but not Live Mail then it sounds like something's wrong with Live Mail accessing the printer. Maybe a re-installation of Live Mail is necessary.
My guess is if you provide more info on what exactly it is that keeps you from printing you'll get more feedback here.
Is there an error message? Or any other info to go by?
A print option dialog screen with a number of installed printers etc?

3 more replies