Tech Problem Aggregator

Solved: Word 2003 - Hyperlinks don't work in Print Layout

Q: Solved: Word 2003 - Hyperlinks don't work in Print Layout

I have been used to using Word 97, but the company has upgraded me to 2003. I am using the Print Layout to create my documents, and when I create a hyperlink, the hyperlink shows up in underlined blue, but it won't work. It will work if I view the document in Reading Layout, but that doesn't do me any good, since that layout does'nt look anything like the Print Layout. Can anyone make any suggestions?

A: Solved: Word 2003 - Hyperlinks don't work in Print Layout

It works.
It's just that Microsoft, in its infinite wisdom, decided to make us Ctrl+Click for a hyperlink.

Otherwise, you can change the setting on your PC to NOT require the Ctrl key.
Tools-Options-Edit tab. Second checkbox on the right...

And don't you just LOVE that Reading Layout feature?

3 more replies
Answer Match 101.22%

Hi

How can I set up word so it always opens in Print Layout.

Itsmainly on word docs coming to me from external sources.

Thanks

Brian
Dublin
 

More replies
Answer Match 87.36%

Hello to all,
I'm wondering if it is possible to change layout on only one page on the document.
I'm writing an article and I want to place picture on the page. Since picture is rather big, it better fits landscape layout page. I can also rotate picture and then paste it on my page, but then, I still have problems to write text below it like "figure 1: Engine...bla bla...."

Thank you
 

A:Solved: Page layout in word 2003

hi Mitjko,

Put a SECTION BREAK before the page you want to change orientation, and another afterwards to put it back again.

Insert / Break / Next Page

HTH
Hew
 

1 more replies
Answer Match 86.52%

Something's happened to my Word. When I paste in a hyperlink it appears like this

{ HYPERLINK "http://www.mpa.gov.uk/committees/x-hr/2001/010621/08.htm"\t"_blank" }

How do I change the settings please to get a regular hyperlink?
 

A:Solved: Strange hyperlinks in MS Word 2003

Click on Tools >> Options >> View Tab >> Uncheck Field Codes

Regards,
Rollin
 

1 more replies
Answer Match 86.52%

I recently installed Office 2003 to replace Office 97 and I now have to press & hold the cntl key when clicking on a hyperlink in my document. This is awkward when I am on the phone. Is there a way to disable the need to press the cntl key?

This is my first post so I'm not sure if I have supplied all necessary info.

Thanks

socalhkc
 

A:Solved: Word 2003 - Hyperlinks Within & To Other Docs

Hi socalhkc, welcome to TSG.

The default behavior in Word 2003 is to require ctrl+click to prevent you from accidentally going to links when you don't mean to, but you can disable it:

Click Tools.
Select Options.
In the Options dialog box, select the Edit tab.
Uncheck Use CTRL + Click to follow hyperlink.
Click OK.

Hope that helps.
 

3 more replies
Answer Match 80.22%

For the past two weeks I have noticed that hyperlinks placed in email I am sending are being stripped by Outlook. I use Word 2003 as the email editor. I can write an email, insert (or have automatically convered) emails but if I either send or save those emails, the hyperlinks are removed. The problem does not occur if I use Outlook's email editor.

I have made no setting changes on my system, except moving from XPSP2 beta to XPSP2 Final.
 

A:Word 2003 hyperlinks stripped in Outlook 2003

Security by MS turned on by default in the final version.
 

2 more replies
Answer Match 78.96%

Hi,

When we try to open a MS Word document from the browser window (IE), it normally opens in the view in which it was last saved. (Web layout, print layout views etc.) Is there any way I can force a word document to open in the Print Layout View, everytime i load it onto a browser window?

(My requirement is actually exporting a JSP File to MS Word. This works fine, and the only problem is, after the export is done, i get to view the word doc in the browser in Web Layout. My requirement is to view it in Print Layout)

Please help me out on this, and i'll be glad to provide any other clarification that you might need.

Thanks,
-Santhi.
 

A:Opening a MS Word doc, in IE, in Print Layout View

Hi,
I don't think there is any (known) way of getting documents to open in your requested view - it just depends on the view the document was saved in.

Regards,
 

1 more replies
Answer Match 77.7%

My professor cannot get his page layout to switch from Landscape to Portrait. We go through the motions, but when he goes to print or view, it stays in Landscape mode! Anybody have any ideas?
 

A:Page Layout - MS Word 2003

Word: From the File menu, select Page Setup... click portrait

Confirm also that the printer has not been setup to print in landscape mode as well.

 

1 more replies
Answer Match 77.7%

Running WINDOWS 7 HOME PRO & MS OFFICE 2003.

I have several Word documents with hyperlinks in them. One link connects to the internet and the other links connect to specific sections of the documents. All the hyperlinks worked until today. Now none of them work. I get a message saying "this operation has been canceled due to restrictions on this computer. please contact system administrator"

I have hyperlinks in Word Perfect documents that still work fine.

What happened and how can I fix it. Should I uninstall MS OFFICE and re-install it, or is there an easier way to fix the problem?

THANKS
 

A:hyperlinks in word 2003

Try opening up task manger and go to processes. Under processes find WINWORD.exe and right click. Then click UAC virtualization.
 

3 more replies
Answer Match 77.7%

Hi,

I have two machines both the same. The problem is that when I create a hyperlink in word 2003 the link opens up in IE Not the application. One machine opens it in Picture Viewer and one opens in IE. I have looked at the file association and it is not that ?

The machine are fully updated ?

Any ideas appreciated ?
 

More replies
Answer Match 77.7%

Hi

I use Win XP and have a Word 2003 document with some hyperlinks in it. Ive had this document for a long time and regularly edit it. The hyperlinks have always displayed in the correct way.

Then I think I must have done something, because all of a sudden all the links are displaying in an odd way.

Ive tried the ALT + F9 trick and Ive tried going to options and turning off field codes - none of these things fixes the problem.

The links look like this:
!! HYPERLINK "http://ec.europa.eu/budget/inforeuro/index.cfm?Language=en" http://ec.europa.eu/budget/inforeuro/index.cfm?Language=en ⊥

NB ive had to insert the "!!" and the "⊥" symbol manually because it didnt copy and paste properly. As a result the upside down t is actually not quite the same (its set slightly lower here whereas in the original document its set higher). Also, the "http://..." bit is actually a live hyperlink in blue in the original document.

Any help would be really appreciated.

Many thanks
 

More replies
Answer Match 76.86%

Suddenly, for no apparent reason any hyperlinks ceased to work. They appear as:
{HYPERLINK "http://www.gilland.net" }
(all black text, no underline and not working).
I have Office 2003 and no idea as to what to do!
Help, please???
Fred.
 

A:Hyperlinks not working in MS Word 2003

From Microsoft Office Pro 2003 Help Files.

How do i enable hyperlinks

On the Tools menu, click AutoCorrect Options, and then click the AutoFormat As You Type tab.
Under Replace as you type, select or clear the Internet and network paths with hyperlinks check box.
 

2 more replies
Answer Match 76.44%

I am trying to add a few screen shots for a document.
I am having problems utilizing the Print Screen function and pasting it into a new Word document. As I press Ctrl-V nothing appears to be pasted until I click the Enter button and the image I pasted finally appears. In the document, if i click on this invisible image, I see the borders of the print screen image highlighted, but still not viewable.

I haven't touched the Tools - Options setting, default settings should be selected. I passed the document on to a co-worker to see if she could see it and with luck, she could see the screen shot I pasted. She was also able to perform the same functions I am having problems with..so I guess it' has to be something with my settings?...

I am using Word 2003--I use all office 2003 applications for work. I thought by closing out of Outlook would help by concentrating on one Task/application, but that didn't help.
PC Model 5100mt
RAM = 512

Any suggestions...would be greatly appreciated.
 

A:Solved: Word 2003 Print Screen problems

More than likely your memory is your issue. You do not have much and if you are rendering lots of images it eats up your computers memory. I have seen this also happen with low-end video cards as well. It has issues rendering or displaying them. Typically if you minimize and maximize you can then see the image. I have not tried the hit enter afterwards though.
 

1 more replies
Answer Match 76.44%

I have just bought a HP which runs Vista. How do I get zoombrowser to allow me to print open layout prints that I can manually drag and drop and alter size and position of multiple fotos on one sheet? The finished product is then stored as .alb file.

Cheers
 

More replies
Answer Match 75.6%

In Word 2003 when I click on the Print Preview icon it opens and the size is always 51%. How can I set this to 100% or 125% etc. so each time I open Print Preview it will open at the set size, as at 51% it is hard to read words.
 

A:Solved: word 2003 print preview size problem

Are you aware that if you click on the background it defaults to 100% for the zoom?
 

3 more replies
Answer Match 75.6%

I have a Word 2003 document in which I have created mailto hyperlinks from regular text. When converted to pdf, the links does not work they just show as hyperlink. If I type a regular email address or website address, no problem, links are fine.

If anyone could help, let me know. Thanks.
 

A:Solved: Word 2003 print Adobe PDF conversion issues

Word 2003 does not come with built-in PDF conversion. It might help if we all knew exactly what software you are using to convert the file to PDF.
 

3 more replies
Answer Match 74.76%

Whenever I double-click on a hyperlink embedded in the body of an email, instead of opening the intended web-page, the SAVE AS dialog box appears and prompts me for a fille name to save the hyperlink as.

Even more interestingly, the SAVE AS dialog box sees the hyperlink as an executable file and not an HTML type file. Furthermore, even if I do assign it a files name, when I hit SAVE, nothing happens!

Any ideas ??

Thanks
 

A:Hyperlinks Won't Work in Outlook 2003

If IE is your default browser, check the file associations for the following.
Open Windows Explorer> Tools> Folder Options> File Types.
URL:File Transfer Protocol
URL:Gopher Protocol
URL:Hypertext Transfer Protocol
URL:Hypertext Transfer protocol with Privacy
In each click the Advanced button. In the Actions box, click open, and then click Edit. In the Application Used To Perform Action box should have:
"c:\program files\internet explorer\iexplore.exe" including quotes.
 

1 more replies
Answer Match 71.4%

This is a sub routine designed for Excel 2003 that calls the 'Save As' routine and allows the user to input their own file name and directory etc. I would like to convert it to a Word 2003 routine can anybody show me how or suggest a method by which I can do the same in Word ? Word doesn't recognise the 'Application.GetSaveAsFilename' method in this routine.

I have tried using a MsgBox to define a file name and the use the ActiveDocument.SaveFileAs to save the file but I can't allow the user to choose his own directory using that method and its clumsy !

Dim file_name As Variant

' Get the file name.
file_name = Application.GetSaveAsFilename( _
FileFilter:="Excel Files,*.xls,All Files,*.*", _
Title:="Save As File Name")

' See if the user canceled.
If file_name = False Then Exit Sub

' Save the file with the new name.
If LCase$(Right$(file_name, 4)) <> ".xls" Then
file_name = file_name & ".xls"
End If
ActiveWorkbook.SaveAs Filename:=file_name
End Sub
 

A:Solved: Convert a Excel Sub to work in Word 2003

Try this

Application.Dialogs(wdDialogFileSaveAs).Show

Rollin
 

2 more replies
Answer Match 70.56%

I opened Word this afternoon to find the normal template page with added graph lines when set to "print layout" view. The page is blank, as it's supposed to be, in Outline, Web Layout and Normal views -- sans graph. If I open a document, graph lines appear along with the text. In another case the document has lines all evenly spaced, top to bottom. I have uninstalled and reinstalled Word, run its own "fix it" program, deleted the normal.dot and so on -- nothing works. Any help or suggestions would be greatly appreciated! I willl attempt to attach screenshots. (Notice that the installer graphics are also broken up; the word "progress" doesn't appear correctly. ) Thanks.
 

A:Corrupted "Print layout" view in Word 2002

Make sure you can see your Drawing Toolbar (View-->Toolbars-->Drawing).

Hit Draw-->Grid. Uncheck the "Display Gridlines on Screen" and then hit the Default button.

Tell it YES...you want to make changes to normal.dot.

Hope it helps!
 

3 more replies
Answer Match 69.72%

I am not sure how this happened and I can not find the setting to change this - I am hoping someone can help me.

When I open a Word document - I have my view at print layout. There are 4 brackets near the margins on my page. I can not find how to get rid of them.
I have tried to do an attachement but I keep getting an error that the server is not found.

Thanks
 

A:Solved: Print Layout View

10 more replies
Answer Match 68.46%

Please note thread name inaccurate. Problem is in Office 2003 and Firefox.

Hi there

I am an IT professional and expert but I have to admit I'm stumped with this problem.

I cannot print to my Xerox Phaser 6280DN PS using Word 2003, Excel 2003, Firefox. Other packages do print, including Wordpad and Acrobat. The OS is Windows 7 64bit, the printer driver is from Microsoft's 'get a driver for W7 64' page.

The printer is connected to my LAN and no other computer on the LAN has a problem. Previous to the install (fresh) of Windows 7 64bit, Windows XP had no problems printing from anything.

Actually, I can't get Word to print on any of the print-like devices listed, including the MS XPS Document writer and Cute PDF writer.

I've googled til I'm blue in the face for months and months.

I do suspect this is a security issue and something to do with user rights, although my account has admin rights.

Please, someone, save me from the misery of converting everything to rtf and printing through wordpad!

Cheers

Matthew

A:Can't print. Word 2003 only.

HI. We have having issues with Xerox copiers also. It seems that with windows 7 the print driver must be certified otherwaise you get prompted for admin rights. Under server 2008 there is a GPO which is called point and print that is meant to take away the prompting but I couldn't get it to work [and judging by the google responses, nobody else could] I have noticed that some of the Xerox drivers we have tried are certified but the certificate has expired which makes me wonder if Xerox are hacking certified drivers about.

1 more replies
Answer Match 68.46%

I have win xp sp3 and office 2003. I cannot print a doc file. I also tried to print an excel file and no go. From searches I deleted the normal.dot file. Still no go. I can print from notepad and email and from webpages. Please help. Thanks in advance.
debbie

A:cannot print word 2003 doc

Hi Debbiesg and welcome to the forum! See if this helps

9 more replies
Answer Match 68.46%

Breakdown:

Windows XP SP3, Office 2003 Standard w/SP3 in a Windows domain environment.
All printers installed are connected to a Windows Server 2000 print server.

Issue:
Word 2003 suddenly lost all print function. No changes where made to the
system. If I click on File/Print? the print options dialog box does not pop
up. I can click on the print button in the toolbar (it highlights and is
clickable) but nothing happens. I can perform a print preview and attempt to
print but with the same issues.

I can click on Start/Printers and Faxes and print a test page. I can click
on the Adobe add-in button and convert it to a PDF and print the document
from Adobe. I can print from Excel, notepad, WordPad, Adobe and even IE7 if I
wanted to, just not Word (Outlook included because Word is the default email
editor).

Attempted fixes:
Delete normal.dot, delete normal.dot and excel1.xlb (seen this restore
functionality before), checked for any disabled items and found none,
performed a repair installation, performed a complete reinstall of Office
2003, logged in using a different user account using different printers, all
with no luck.

Suggestions appreciated....

A:Cannot print from MS Word 2003

2 Microsoft articles you might look at:http://support.microsoft.com/kb/826845http://support.microsoft.com/kb/826862

4 more replies
Answer Match 67.2%

At my work we have templates from Word 2003.

When we open them in Word 2007 they doesn´t work as they should.

We have for example a menu like

2 Electronics
2.1 Phones
2.1.1 Mobile phones

When you make an uppdate on the menu the sub-numbers disapear so it is
2 Electronics
Phones
Mobile phones

Also in 2003 you get a menu to the right where you can change in the list not only the types but also the numbering. Is there something like that in 2007?
 

A:Making Word 2003 templates work in word 2007

A couple of things.

Firstly here is an interactive guide for some of the features in 2003 - 2007. It is useful in some circumstances
http://office.microsoft.com/en-gb/word/HA100744321033.aspx

In regards to using 2003 templates for 2007 - i noticed that not all things worked in the same way in 2007 especially when it came to printing (things would display differently to how they would print)

I work for a big company and i had to redesign alot of templates. Sorry.

In regards to changing the numbering, you now right click on one of the actual numbers within the document and you can change the numbering from there.

Hope that all makes sense.
 

1 more replies
Answer Match 66.78%

I used to have Works and I used it to print envelopes. Now I have Office Word 2003 and cannot get an envelope to print.

I type in my return address, for envelopes where I just want a return address, and I pick the picture that shows the envelope with the front down and the flap pointing to the right. That's how I put my envelope in the printer.

Then I click Print and the envelope goes about halfway in and stops. I click on the X on my HP printer to make it come out and it does, blank.

How can I get an envelope printed in MS Office Word 2003?

Thanks.
 

A:print envelope in MS Office Word 2003

6 more replies
Answer Match 66.78%

Hi,

A couple of machines in the office have recently upgraded to word 2003 and the printing macros for these machines are working intermittently. I have looked through the code but can’t see anything obvious, and I haven’t had much experience with word 2003.

The macro takes the computer name and a printer tray name stored in a text file and passes them through the macro to print out on the respective trays. i.e. intTray3 is Tray3.

Any direction or help is appreciated
Code:
Option Explicit
Option Compare Text

Const cTray1 = 1
Const cTray2 = 2
Const cTray3 = 11

Public intTray1 As Integer
Public intTray2 As Integer
Public intTray3 As Integer

Sub AutoExec()
On Error Resume Next

Dim varFile()
Dim varText
Dim strText As String
Dim strPCName As String
Dim strPath As String
Dim intFile As Integer
Dim intLen As Integer
Dim intPos As Integer
Dim intLast As Integer

'Initialize
intTray1 = cTray1
intTray2 = cTray2
intTray3 = cTray3

strPCName = Environ("COMPUTERNAME")
strPath = Project.ThisDocument.FullName
strPath = Left(strPath, InStrRev(strPath, "\"))

strPath = strPath & "LWR.txt"

intFile = FreeFile
Open strPath For Input As #intFile
Do Until EOF(intFile)
intLen = intLen + 1
Input #intFile, varText
'ReDim Preserve varFile(intLen)
'varFile(intLen) = varT... Read more

More replies
Answer Match 66.78%

Hello,

I currently have about 30,000 lines of macros. Occasionally the people I work for want an updated list of all the macros in that file (most are user specific) so that they know what macros they have and if then need a different one or edit a current one.

What have been looking for is a way to print the names of the macros only, and not the entire marco file/code.

the first macro looks something like this..

Sub hinj()
'
' hinj Macro
' Dr. H's Corticosteroid Injection
'
Selection.TypeText Text:= _
"DESCRIPTION OF PROCEDURE"
Selection.TypeParagraph
Selection.TypeText Text:= _
"The patient's * was injected with."
end sub

(cut short for brevity)

then the next macro, and so on and so forth.

What i have been looking for is a way to print a list of the macros but not the macro themselves.

IE.. I wold like it to print out...

hinj Macro
Dr. H's Corticosteroid Injection

hhyal
Dr. H's Hyalgan Macro

hspi
Dr. H's Supartz Macro.

so on and so forth with all 375 macros printed.

Is there a way to do this? I would be most appreciative for any clue as to how to do this.
 

A:Microsoft Word 2003 macro print

Bump...

Is this not possible?
 

1 more replies
Answer Match 65.94%

Hello please can someone help - this is driving us all mad! On one of our PC's running Word 2003, whenever we try and type a new document - it looks fine on the screen, but when you print, or do print preview, it spaces the text out so that it fills the whole screen creating huges gaps in the text. We have checked everything - page setup, line spacing etc and have even uninstalled and re-installed both Office and the printer. We can however open and print existing documents without a problem! How can we fix this???? Thanks
 

More replies
Answer Match 65.94%

I'm trying to find an Avery label template for Word 2003.

But everywhere I look I hit a dead end.

I know this has to be easy to do, once you know how.

So, where do I start?

The label package I have has this number on it: 06141.

Will in Seattle
a.k.a. "Clueless"

A:Print Avery 06141 labels in Word 2003?

Is this MS website any help for you. Read through it & you will see a link to Avery for their label wizard that you can download.

https://support.office.com/en-au/art...4-5f3b910a85dc

3 more replies
Answer Match 65.94%

For some reason, I cannot open Hyperlinks from e-mail messages in Outlook 2003. When I try, I get the following message: "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator".

I currently have Firefox 3 as my default browser, however, if I change it to IE, I still have the problem. Please help!
 

A:Solved: Trouble with Hyperlinks in Outlook 2003

Apparently, Internet Explorer 8 beta 2 was causing the problem. I uninstalled the update and reverted back to Internet Explorer 7 and the problem solved itself. I was able to default to Firefox 3 without a problem.
 

1 more replies
Answer Match 65.94%

Some how hyperlinks has been turn off on my Outlook 2003. Now when I click on a link it brings up the "save as" action. I tried holding down the control key and clicking on the link but no good.

I am using XP Professional with all the latest updates. I have Office Professional 2003 with latest updates. I also use Zonealarm Suite.

Any ideals.
 

A:Solved: Turn on Hyperlinks in Outlook 2003

16 more replies
Answer Match 65.52%

I'm running XP SP3 and believe version is Word 2003, might be previous version. When I try to open hyperlink by control>mouseleftclick get this message: "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator."

I am the system administrator. I ran Auslogics free registry cleaner about a week ago. From what I've read http://www.slipstick.com/problems/link_restrict.htm#reg2, this is a registry error. But the instructions posted there do not work and are inconsistent with that given in a link in those instructions.

Restored to prior point, still doesn't work. Changed default browser to IE7, still doesn't work.

Can this be fixed and how? Thanks!
 

A:Solved: Hyperlinks not opening in Word

Simply follow 1st Step
*goto control panel > Internet Options> Programs> Make Default Browser
OR
*goto control panel>set default programs> goto custom> choose a default web browser.
If it is solved then its okay. rather opt my style.

download google chrome or mozilla firefox set as chrome or mozilla as default web browser while installation.

then make IE default. & Test

BINGO
 

2 more replies
Answer Match 65.1%

Hi, all.

I've searched here and Googled. The problem (but no solution) has been posted elsewhere and I'm hoping someone here can help.

Problem: Nearly 1,000 hyperlinks in an Excel 2003 workbook now point to the wrong directory/drive and need to be repointed. For example:

Old hyperlink: ///dsnetapp\\100\125\data\[doc name].pdf
New hyperlink: I:\100\125\data\[doc name].pdf

All of the documents to which the hyperlinks point have been moved to a new drive and no longer work.

What I've tried: Search and replace (doesn't work), manually editing a single hyperlink (doesn't work). Everything reverts back t the ///dsnetapp\\ address. The workbook, worksheet, and cells are not protected. The workbook is not read-only.

The only thing that seems to work is re-doing each hyperlink (go into Edit Hypelink, navigate to new location, select pdf, and save). I would like to find some fix that's less time-consuming and would appreciate any assistance.

Thank you.

Brent
 

A:Solved: Excel 2003: Possible to Globally Change Hyperlinks?

16 more replies
Answer Match 65.1%

All of a sudden anytime I open a word document it defaults to the reading layout, how do I change that default?
 

A:Solved: Microsoft Word Reading Layout Default

From the Tools menu, select Options.... from the General tab, remove the tick from the top right hand corner check box "Allow Starting in Reading Layout".

This should also prevent word documents sent as email attachments from opening in reading layout.
 

2 more replies
Answer Match 64.68%

I have a little problem with some hyperlinks. I have about 300 word docs. with hyperlinks to drawings on Server1. i had to move all of these drawings to Server2. So now the hyperlinks do not work. Is there an easy way to edit all of the hyperlinks in a doc at one time to just change the path. Or am booked to the end of the year updating hyperlinks in word. Please help, i thought maybe that there is a macro or a little script that would do this.
 

A:Solved: change mutiple hyperlinks MS Word

16 more replies
Answer Match 64.68%

Hi, All,

I hope someone can help me on this. I don't know why this is happening (it was not this way in the past) but whenever I try to execute a hyperlink in Excel I receive an error message stating, "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." If I copy the file and use it on another computer the hyperlink works.

My computer is not a corporate computer and I am the only user. It runs Windows 7 and Office 2007. It is on a (wired) network with the Home classification. I also use Norton Internet Security.

Does anyone have any idea what setting is causing this and how can I change it?

Thanks,
Dennis
 

A:Solved: Hyperlinks Blocked in Excel and Word

A lil googling brought me this, hope it helps http://www.slipstick.com/problems/link_restrict.htm
 

2 more replies
Answer Match 64.68%

hi there

i did a search awhile back for email addys in a document...in the course of setting up the search, i changed some setting somewhere so that now when i type in either an email or a website, the formatting is {HYPERLINK...yada yada yada} instead of a blue highlighted and active link

i CAN change the formatting (under styles) to hyperlink, but it's not active.

where do i go to make this right?
 

A:Solved: i lost active hyperlinks in word

14 more replies
Answer Match 64.68%

I am preparing a chemistry textbook and have hit several interesting, undocumented limits in Word. I was able to bypass them by splitting the document into two documents and linking the second as a sub-document in the first. This introduced another interesting problem...

Each document contains several text boxes.

Observations
&#8226; Everything is visible is print preview.
&#8226; When I print each individual document, everything prints.
&#8226; [THE PROBLEM] When I print the complete document, some(?) text boxes in the first document do not print; all text boxes in the second document print. (Again, everything is visible in print preview, but not in the printed document).

Your thoughts...

Roy Jensen
Chemistry, Grant MacEwan College
 

A:Word 2003 master document doesn't print text boxes

8 more replies
Answer Match 63.42%

I get a hyperlinks from any of the emails and when I click in to it (them) the problem is that it or they donot work could any one through some light on the subject or has any ideas the reason that they dont work.

Answers on a postcard

Lockeyp.
 

A:Solved: Hyperlinks Dont Work ?

What's your e-mail program please?
 

2 more replies
Answer Match 63.42%

Hi,

Sorry if this is a bit long but there's no other way to explain it unless I give the background...

My wife hadn't accessed her User account for some and found last week that no icons or taskbar would load up on boot, just the wallpaper.

When I tried it, I went to the taskmanager and found that explorer.exe was missing from the processes list. When I ran it manually as a new task from within task manager the PC booted up normally. Obviously though, every time I rebooted I had the same problem so I restored the system to an earlier date.

On first glance this seemed to do the trick. Apart from having to set up her email account in Mozilla Thunderbird again, it seemed to boot normally, then I tried to search from within Google, Altavista, Lycos and this is where the problem now lies...

I can enter text in the search-engine's text-entry field, but if i hit 'Enter' or click 'Go' (or in fact click any hyperlinks), nothing happens. The only HTML page I've found so far where I can search from within a text-entry field is that on the BBC homepage (http:\\www.bbc.co.uk) although why this should behave any differently is anyones guess.

To confuse things even more, I only get this problem in User Accounts, Google, Altavista (etc) work fine in my admin account. I've even tried deleting her user account and creating new ones, but they all have the same problem.

So what is this? Are my user accounts being corrupted as I create them or i... Read more

A:Solved: Enter & Hyperlinks don't work in IE6

OK, fixed it so I'm posting this in case anyone else runs up against the same problem.

HP advised me to reinstall the latest version of IE6 (SP1), here's the link...

http://www.microsoft.com/downloads/...cb-5e5d-48f5-b02b-20b602228de6&DisplayLang=en
 

1 more replies
Answer Match 63.42%

Obviously I gummed something up but I can't figure out what.

Ordinarily a link in an Outlook message went to a web site. This afternoon, clicking on a bunch of known to be valid links always brings up the Windows or Office dialog box "Look in My Documents" and it is looking for an Exe file.

Any idea what setting I hit to generate this result?
 

A:Solved: Outlook hyperlinks don't work

SOLVED. I won't bore anyone with the details because it could only happen with an advanced anal nerd.
 

1 more replies
Answer Match 63.42%

I'm running Windows XP with MS Office. I get my email in Outlook. Starting today whenever I click on a hyperlink, small window titled "Locate Link Browser" pops up showing "Look in: My Documents". At the bottom it has "File name" _________
and "Files of type" Executable Files.

I have no idea how to fix this.

ALSO when I click a shortcut on my desktop, a small window titled "Open with" pops up showing "Choose the program you want to use to open this file:"
Then I have to select "Internet Explorer"
 

A:Solved: Hyperlinks don't work in Outlook

Perhaps this will help.

or

Open Outlook> Tools> Options> Mail format> in Message format make sure the "compose in this message format" is set at HTML.

Outlook will only receive messages in the format it can send them in.
 

2 more replies
Answer Match 63%

Since installing Win10 I can't get 2003 Office Word to work.

It won't make links for email and web addresses, the wrong toolbars come up again and again, and it generally doesn't work.

Any way to fix this? I have tried with two different 2003 Office programmes, re-installing, but no luck.

Thanks

A:Word 2003 won't work.. any way to fix it?

I don't know if this is the solution, but I think that Office 2003 is so old that it works but has errors because of Compatibility. I had this same problem, so bought a subscription to Office 2016 and it all worked fine! ��

3 more replies
Answer Match 62.58%

When I click on hyperlinks in Outlook 2007 they don't work. I only get an error message. After searching other threads on this site I found my problem. I found that Firefox 13 wasn't set as my default browser. My problem has been solve.
Bill
 

A:Solved: Hyperlinks in Outlook 2007 don't work

?? If you no longer have the problem, then you should mark it "Solved." Thanks for sharing.
 

1 more replies
Answer Match 62.58%

I have a couple of problems with my internet/email (Yahoo).

Problem 1
=======
My hyperlinks does not work. For example (see the attached file). When I go to my Yahoo email, I first get the message as shown in the attachment. It never redirects me, hence my alternative is to click on the hyperlink. However, when I click on the hyperlink then nothing happens. What I currently do as a workaround is use the back button to go back to the yahoo page and then I click on "mail" again to get me to my emails.

I know this is some setup problem with Tools --> Internet Options. I have tried almost everything on what people have recommended on enabling or disabling the options, but the problem has not been fixed.

Problem 2
=======
This just started happening since a week ago. I have rebooted my computer a couple of times just to see if this problem would go away, but it hasn't. The problem is that when I go to my Yahoo email, it takes literally 2 to 3 minutes to open an email message even if this is without any attachments. This is extremely slow and frustrating. I am not sure why this has become so slow and what can I do to fix it.

I would appreciate any help. Thanks.

Regards,

Typhoonwinds
 

A:Solved: Hyperlinks don't work and email too slow

14 more replies
Answer Match 62.58%

Well i did a big report on my computer with Word Perfect i couldnt print it so i took to school on my flash drive. IN my first class i edited it on Word 2007 and in the class i could print it they had Word 2003 and i couldnt open my file and now i cant even open it in word perfect. I doubt i can use the laptops for a while anyway i can open this on wordperfect
 

A:Solved: Word Perfect- Word 2003 - word 2007

If you saved the file in the "new" Word 2007 format (with a file extension of .docx) then you will be unable to open it in the other applications.

For Word 2003 you can install a converter, but I know of no XLM converter for WordPerfect.

When using Word 2007 you need to "save as" Word 97-2003 format to retain backwards compatibility.
 

1 more replies
Answer Match 62.16%

helloi people

if i click on a link (hyperlink) in an email , it will not open to the page.

any suggestions please ?

ty.
 

A:Solved: hyperlinks wont work in outlook mail

12 more replies
Answer Match 62.16%

To fit a big flowchart onto a PowerPoint slide, I had to create a separate .PPT file in Portrait mode. I then created hyperlinks to navigate back and forth between the main (landscape) .PPT file and the portrait .PPT file. They work fine...on MY computer. When I send the two files for review, the reviewer gets a pop-up message (“Can’t find specified file”) when he clicks on a hyperlink.

I explained that he needs to save the files to his desktop and put both files in a folder and open it from there, then go into Slideshow mode; he said he did, but the hyperlinks won’t work. What can I do so the hyperlinks will work between these two files on other computers?
thanks!
Paul
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 1
RAM: 1023 Mb
Graphics Card: Parallels Display Adapter (WDDM), 256 Mb
Hard Drives: C: Total - 65433 MB, Free - 20391 MB;
Motherboard: Parallels Software International Inc., Parallels Virtual Platform
Antivirus: AVG AntiVirus Free Edition 2013, Updated and Enabled
 

A:Solved: PowerPoint hyperlinks donÂ’t work on other computers

9 more replies
Answer Match 61.74%

Hello,

I am having issues with Word and Outlook 2003. I just upgraded them from 2000 and now I am running into a couple of issues. Help!

Microsoft Word 2003
- Can't highlight or select an area on my Word page with my mouse. I can use my keyboard, but that becomes quite annoying as you can imagine.

Microsoft Outlook 2003
- Can't highlight or select an area on my page with my mouse. I can use my keyboard, but that becomes quite annoying as you can imagine.
- Can't open Word document attachments only. I can open excel, pdf, etc..., but not Word.

I have restarted my pc, reinstalled office 2003, erased the normal.dot profile, removed the 11.0\Word\Data registry and no luck. Any solutions would be greatly appreciated. Thanks!
 

A:Can't highlight in Word 2003 and Outlook 2003. Can't open Word 2003 attachments.

9 more replies
Answer Match 60.9%

I'm having a very hard time with Word 03 Professional. For some reason, my macros have been disabled, and I'm not even allowed to make new ones. The exact message I'm getting is "The macro cannot be found or has been disabled because of your Macro security settings." My security settings are at low right now; I've went to Help>About Microsoft Ofiice>Disabled Items, but nothing is there. I'm not sure what to do next. Any help would be appreciated.

More replies
Answer Match 60.9%

When I bought my new computer its' 64 bit, I transferred everything from my old 32 bit computer and

everything went fine, but my word 2003  will not load the Pleading Wizard.  It loads everything else in the
word program but the PLEADING WIZARD, it was working fine in windows 10 at 32 bits
Does anyone know how to get my 2003 32 bit program to work on my new 64 bit computer?

More replies
Answer Match 60.48%

As above.

Is there a software upgrade i need to do.

I have the password. comes up with...

"Word experienced an error while trying to open this file"

Thanks in advance

K
 

A:Solved: Can't open password protected Word 2007 document in Word 2003

6 more replies
Answer Match 60.48%

First, let me start by saying I am not an IT computer person, I have very basic knowledge (other than what I do for a living) about computers, and I really need instructions that are easy to follow, please?

I am a medical transcriptionist. I have hundreds of auto corrects on my current computer with Windows XP Word 2002 on it. I am needing to, if possible, copy the auto corrects from Word 2002 to another computer with Windows XP Word 2003.

I also have hundred of words that I have added to spell check that it would be great if I could copy those as well.

I do have a flash drive that I can save these to.

Can someone please help me in terminology and steps that a computer dummy can understand?

Thanking you in advance.
 

A:Solved: Copying auto corrects from Word 2002 to another computer with Word 2003

6 more replies
Answer Match 60.06%

Hi all, do you know if it is possible to word-wrap text around an inserted picture in Word 2003? Basically, I'm trying to create a class reunion program with a one-page bio of a person with his/her picture in the upper right-hand corner. I have pasted a picture and positioned it where I want at the top; however, it forces the text below it downwards, which is not what I want. Any ideas? Thanks in advance.
 

A:Solved: Word 2003 - Insert Picture/Word Wrap Question

Select the picture

Make sure the mouse pointer is hovering over the picture and click once with the right mouse button

Click once with the left mouse button on the menu choice "Format Picture"

Select the "Layout" tab

In the section called "Wrapping Style" click once with the left mouse button on "Square"

Beneath where it says Horizontal alignment click once with the left mouse button on "Right"

Click on OK

You should be able to type text to the left of the picture.
 

3 more replies
Answer Match 59.64%

I have a table that I know for sure will be long column-wise, and short row-wise. If I print it out, I know that it will take several pages, but only take up the top half of the paper. Is there any way I can set something so that the continuation of the table prints out on the bottom half of the page rather than on a new page? I can't move the columns because they are linked to formulas on other worksheets.
 

A:print layout in Excel

10 more replies
Answer Match 59.64%

I have built a document in MSword 2000 and I seem to be missing part of my document in print layout view allthough I can see it in normat view. Any body go any suggesttions.
 

A:print layout view

12 more replies
Answer Match 58.38%

I think the default for opening attached word documents is in 'Normal".
All of a sudden when I open a 1 page document it shows as two pages.
I can't tell if it is in a draft or editing mode. I then must go to "view' and change to 'normal' and then I have to go down to the status bar at the bottom and change it to 'print layout view'. How do I set it up as a default like that.
 

A:MSWord - Documents opening in Print Layout

Hi, Cynthia. There really isn't a "default". Word will open in the last view used, and documents will open in the last view used (and doc was saved). But if you always want to open in print layout view, you PRACTICALLY can. Just follow the instructions here:
http://vbaexpress.com/kb/getarticle.php?kb_id=65
 

1 more replies
Answer Match 58.38%

Win 7 Compatibility system indicates that PSP Photo X3 is needed for use on a 64 bit version of Win 7. My copy of X2 works perfectly well except that, when using Print Layout to set up a page for printing, the thumbnails of photos I import show only as black-filled rectangles. Since this appears to be the only problem, I am loath to spend money on a replacement programme. Does anyone know a way around it, please?

A:PaintshopPro Photo X2 - no thumbnails in Print Layout

I have Ult 64 bit and PSP X2. Print layout iworks fine. The image is a .jpg and was open before I went to print layout. I tried opening the same .jpg with print layout open and again it worked fine. This is probably useless info but it will open the files either way.

4 more replies
Answer Match 58.38%

i need to transfer my resume from word 2007 to word 2003 because this site im trying to uplaoded to wont take the 2007 format.

I cant open a 2003 doc with 2007..

Brilliant move by Microsoft

Any Ideas?

Thanks
 

A:Solved: Word 2007 doc to Word 2003 Doc

Firstly, Word 2007 can be set to save all documents in compatability mode (.doc instead of .docx). Just save as, or under Word options set it as the default

Secondly Word is full backwards compatible with earlier versions.

What exactly are your problems opening older document versions, what message do you get?
 

3 more replies
Answer Match 57.96%

Hello,

I have a problem when I try to print Word documents that contain hyperlinks or any line or image in the document. Rather than printing the hyperlink, html - or something prints out and if I'm trying to print a graphic I've downloaded for example, it will not print at all. Is there a properties button or flag that I need to turn off in order to correct my printing problem?

Any suggestions or help you can offer will be much appreciated! Thank you.
 

A:Unable to print documents that contain hyperlinks

11 more replies
Answer Match 57.54%

I have a Canon MultiPass MP390 All-in-One printer, fax, scan, copy machine.
When printing from my Firefox web browser (latest version) all copies include the URL information at the top of each page. Often when printing multiple pages graphic information is split onto two pages. Is there a way to layout pages so as not to include the URL information and to avoid splitting graphic information? I am using Windows XP Home Edition operating system on a Dell Dimension 4700.
 

More replies
Answer Match 57.54%

Hi, I've got a large word document (2007) containing over 100 pages. However, in print layout view (the one I normally do editing in), you cannot scroll past p41. As you scroll into p42, word stops refreshing and updating the screen and moves you back into p41. I've uploaded the file so that you can see what I mean for yourself (although I have read the notice not to upload private data this problem is file-specific - I'll take it down as soon as a fix can be found):

feasibility study.docx

And also a linked excel file to go with it (in the same directory. I've got references in the word document if that makes any difference):

finance.xlsx

Oddly enough, I can see the whole file in outline or draft view, though I am unable see any pictures or charts. On print layout view, clicking any link in the document map that takes you past page 41 will do nothing, and pressing ctrl+G to jump to a page will result in word telling you that it "cannot determine the destination". Also, trying to print the document results in word showing a progress bar in the status bar printing p1, p2 etc until p41, then it just aborts silently. Oddly enough saving it as a 2003 .doc file resolves the problem, but messes up the formatting.

I really hope you guys can help.

Thanks for your support.
 

A:Strange print layout view and printing problem

After experimenting some more I found it to be a problem with the equation editor in word - I think it was that fact I had multi-line equations and after some combinations of undo/redo and deleting line breaks, ended up with two equations on the same line (it usually merges two adjacent equations) - i think that really messed word up, though to be honest Word should never have let it happen in the first place.

I think in the end its something to do with aligning characters on multi-lined equations that have empty lines in between, e.g ("<br/>" for line break, "|" for alignment character):

i.e. x|=y+z <br/>
<br/>
z|=m/n<br/>
<br/>
a|=b-c/d

When removing and creating the alignment points on these equations, the equation editor can often be slow or start causing the problems I mentioned before - I know its not just my version of Office since I've tried it on at least 5 different computers in 5 separate locations.

But anyway, I've replaced the feasibility study.docx file with one containing the culprit equations in case somebody from Microsoft looks round and decides to fix the problem.

See what you think.

Thanks
 

1 more replies
Answer Match 57.54%

Hi,

I'm using Excel 2003 with PDFCreator printer.

What I'd like to do is to print the whole workbook into PDF but the hyperlinks to other sheets (located on sheet1) should work as hyperlinks to the pages in PDF where sheets are located.

Is this possible?

Thanks a lot,

Michal
 

A:Excel: Print Preserving Hyperlinks to other Sheets

9 more replies
Answer Match 57.12%

I want to email a Word 2003 document(as an attachment) that has two hyperlinks to two different word documents files. I have tried this and everything works fine except when I ctrl + click on the hyperlinks the files won't open. How can I get this concept to work. I don't want to send a lot of files and attachments for the recipient to have to deal with.
 

A:Solved: Word doc. with hyprlinks to other word docs. won't work when emailed

16 more replies
Answer Match 56.7%

Is it possible in the Inbox layout to have the folders on the left, preview pane on bottom right and the top right pane split between individual email listings and a monthly calendar?

Thanks for the help.

Marshall
 

A:Outlook 2003 Layout Question

Post a screenshot of the way yours is now.
 

2 more replies
Answer Match 56.7%

Hi has anyone got any VBA to print a word doc duplex from an access form?

Thanks.
 

A:Solved: Access 2003 vba to print duplex

16 more replies
Answer Match 56.7%

Hi Guys,

One of my colleagues is having a problem where his Outlook freezes when he tries to print.

If he looks at his inbox, highlights the message he wants to print and goes File > Print, his PC will freeze up and need a Ctrl + Alt + Del to get out.

When he opens up the email by double clicking it however, he can print problem free.

This problem is only happening some days, but when it happens for the first time in the day, it will do so until the PC is restarted.
All of the Outlook settings appear fine and other users on the same printer are ok.

A Google session has not come up with anything useful so far - over to your collective wealth of knowledge!
Regards
Andy
 

A:Solved: Outlook 2003 freezing when trying to print

Always occurs with the same printer? If so, have you tried updating the driver or reinstalling the printer?

Only occurs with Outlook?
 

3 more replies
Answer Match 56.7%

Is there any way to print the registry in MS Money 2003? I want to print out all entries that are uncleared. I don't want them sorted in any way, just printed out as they appear in the registry.

Thanks
Peg
 

A:Solved: Print Registry in MS Money 2003

I am running 2004 but I think 2003 is about the same.

Open your registry & click REPORTS in the menu bar, there should be some predefined reports in the Gallery & Monthly tabs. You can modify to your liking or create a totally new report & print just about anything you can imagine.
 

1 more replies
Answer Match 56.7%

I have a User who receives an excel spreadsheet via email froman external vendor.
when she saves the file to our server, then opens the XLS she gets a " printer setup" dialogue window. however when I open it from the same location I do not get the printer window.

on checking her printer settings she has a printer set up, and her printer has the same settings as I have,as far asModel, printer type, paper orientation and paper size.

can anyone suggest what else i may need to check for to resolve this issue.
I have considered removing all printers and see what result that has.

also could something be being saved in the document before we receive it that would be expecting a particular setup or printer when the file is opened?
(please be gentle with me this is my first posting,and i may not have covered)
 

A:Solved: Excel 2003 print setup pop up

9 more replies
Answer Match 56.28%

Ok, I am going to learn this by process of elimination. This I have found out...

1. You cannot apply a new "Slide Layout" to an existing Slide. I hit "Apply to Selected Slide" and it does not change it. Please correct me if I am wrong.
 

More replies
Answer Match 56.28%

I have been using MS Word for ages but recently every time I want to print something I get this annoying message”

“The margins of section 1 are set outside the printable area of the page. Do you want to continue?”

I have to click yes otherwise it will not print

Have search everywhere to get rid of it but with no success

Does anyone knows how do get rid of it? (I use Vista Home Premium, MS Word 2002)

Thanks
 

A:Solved: MS Word Print Margins

16 more replies
Answer Match 56.28%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3543 Mb
Graphics Card: Intel(R) Q45/Q43 Express Chipset, 1547 Mb
Hard Drives: C: Total - 232279 MB, Free - 179420 MB; D: Total - 5160 MB, Free - 520 MB;
Motherboard: Hewlett-Packard, 3048h
Antivirus: McAfee VirusScan Enterprise, Updated and Enabled

I am trying to print a document in Word 2010, but as soon as I click print, it starts to pool then tells me that word has to close. I have been printing various documents without any problem, in Word and pdfs, and the problem seems to be specific to this document.
 

A:Solved: Word crashes when I try to print

Have you tried printing to a different printer such as PDFCreator?
 

2 more replies
Answer Match 56.28%

I'm using MS Word 2k. It shows up fine except its in print view all the time. There are paragraph signs like the greek letter Pi and periods after every word. I tried switching it into normal view but it won't do it.

Any ideas?
 

A:Solved: MS Word 2k Won't Get Out of Print View

11 more replies
Answer Match 56.28%

I just bought an HP Photosmart Premium C309 all in one printer. It will print from all apps except Word. When I go to the printer job the status is "spooling". Help!!

Thanks, Pat
 

A:Solved: Can't print from Microsoft Word

pgeddes,

You've marked this Solved so I'm not sure if you've resolved the issue or not.

If you're still having the issue, try turning off background printing in Word.

In Word 2007:
Office icon > Word Options > Advanced
In the Print section, uncheck Print in background

In Word 2003:
Tools > Options > Print
In the Printing options section, uncheck Background printing.
 

2 more replies
Answer Match 56.28%

Just recently one of my computers decided it wasn't going to print excel or word documents. I received an e-mail with an excel table attached and tried to print it. The print box opens ok and the printer starts after I click print, but when the printer is done there is no ink on the page. The same happened when I copied the excel table to a word doc. I tried to print from an original excel doc I created as well as a word doc and the same thing happens. I am able to print fine from other programs and a test page prints fine too. I deleted the driver and reinstalled from XP as the printer's site says to use the XP driver. Is there a setting in Windows office or in XP that I need to set? Have run out of ideas.
 

A:Solved: Can't print from excel or word

6 more replies
Answer Match 56.28%

Hi , When I type a document in Paragraph form with no skipped lines and only indentions at the front of paragraphs, when I print it, It will scramble the lines, skip lines and whatnot. It looks nothing like the original. I am at a school where two computers are doing this. When you go to print preview you also see the scrambled version. These kids are trying to type book reports and when they print, no telling what order their sentences are. They need YOUR HELP! thanks
 

A:Solved: Word doesn't print What I see

14 more replies
Answer Match 55.86%

Hi

I have a Subform embedded in the Main Form.
Main Form has a print button.
By pressing the button I want to print current record from the Subform only.

The code I use in the Subform is (main part only):
Public sub PrintSingleRec
DoCmd.DoMenuItem acFormBar, acEditMenu, 8, , acMenuVer70
DoCmd.PrintOut acSelection
End Sub

The button in the Main Form is calling this function to print the record.
What I get is - all records are being printed out, from the Main Form and from the Subform.

Thanks,
Barbos
 

A:Solved: Access 2003 VBA - Cannot print single record

6 more replies
Answer Match 55.86%

I have a large file that I print many times and there are some pages included in the list that are not needed and I throw away every time.

Other than print twice, I'm sure there is a macro that can be programmed to skip those pages, or maybe a macro to link the two print ranges.

Can anyone get me started?
 

A:Solved: Interesting Excel 2003 print macro

16 more replies
Answer Match 55.86%

I have placed a command button on my worksheet. However, my worksheet could contain hidden rows.

Is there a way to have the command button to only print the visible rows, and not the hidden rows?

Here is the code I have behind the command button now....
Code:


Dim r1 As Range

With ActiveSheet
PageSetup.PrintArea = ""
Set r1 = Range("A1:O250")
r1.Select
Selection.PrintOut

Range("A3").Select

End With

 

A:Solved: Excel 2003 Print Command Button

16 more replies
Answer Match 55.86%

When i do Ctrl+K (in MS Word) i get to the hyperlinks insertion table, however when i scroll down the previously browsed pages i have thousands of un-wanted hyperlinks that simply confuse matters. does anyone know how to delete these hyperlink??? if it helps i am runnig windows 98 se + Office 2000 premium!

PLEASE HELP ME!!!
 

A:PLEASE HELP MS WORD:HYPERLINKS

These links are coming from your internet browser. If you want to get rid of all the links from Word then you have to remove them from your browser. If you are using Internet Explorer go to Tools, Internet Options, and then click on Clear History. Hope that helps a little.
 

2 more replies
Answer Match 55.86%

Hello to all!

It has been a while since this problem first occurred. Now it has become unbearable. When I try to print, use print preview or enter page setup, Microsoft Word 2003 freezes. The same thing also happens with other Office 2003 programs like Microsoft Excel 2003.

I am not sure if there is a problem with my printer driver (the printer is an HP L2600n by the way) as I have reinstalled it many times AND I have no problem using it as a network printer and can print the same word documents FINE from laptops or other desktop computers in the house. Thus I know that the documents aren't corrupted. I can also print .pdf documents fine from this computer. I think this problem started when my laser printer driver 'disappeared' and when I tried to reinstall it I got a spool-related error. I reinstalled the spool driver and then when I tried to print a .doc file I was unable to do so. The problem may most likely be linked to Office 2003 itself but I have tried options like deleting the data key and renaming the normal.dot template, all which have failed to alleviate the problem.

I think that is all the information I can offer to assist anyone trying to help me with this matter, and I hope that the problem can be fixed without me having to reformat or something like that.

Thank you in advance.

P.S Not sure if this will also come in handy but my OS is Windows XP Professional SP2.
 

A:Office 2003 freezes when trying to print, use print preview or enter page setup

In Office, On the Help menu there is a 'detect and repair' option. It wouldn't hurt to run that. This could also be a sign that the hard drive is going bad (loosing stuff here and there)...
 

1 more replies
Answer Match 55.86%

Recently I have not been able to click on any hyperlinks that are in received emails I'm getting. I receive the following message:This operation has been cancelled, due to restrictions in effect on this computer. Please contact your system administrator. I was recently infected with ZeroAccess rootkit, not sure if that issue is fixed as no one responded to that post. Broni redirected me to malware logs and for me to post there which I did, but this I think is a separate issue.

A:Outlook 2003 Hyperlinks not working

Run this fixit

http://go.microsoft.com/?linkid=9726441

good luck

3 more replies
Answer Match 55.86%

I have two problems with Outlook. I don't connect when I click on a hyperlink in an e-mail. And no pictures are displayed.
 

A:Outook 2003 Hyperlinks Fail

If hyperlinks are not working in Outlook or other Office applications:

Start the Internet Explorer
Select Tools / Internet Options
Click on Programs tab
Make sure that Internet Explorer should check to see whether it is the default browser is enabled
Click Reset Web Settings.

Click Start / Run / regsvr32 urlmon.dll

If that single change does not resolve the problem, repeat the process by running the following additional entries:
regsvr32 Shdocvw.dll
regsvr32 Msjava.dll
regsvr32 Actxprxy.dll
regsvr32 Oleaut32.dll
regsvr32 Mshtml.dll
regsvr32 Browseui.dll
regsvr32 Shell32.dll (Windows XP and Windows 2000 only)
 

1 more replies
Answer Match 55.86%

I'm using Excel 2003 and creating documents with hyperlinks to other documents. The hyperlinks work fine until I save the file and re-open it. Once re-opened the hyperlinks are just plain text again.

Any idea why this is happening?

Thanks in advance.
 

A:Excel 2003 - Hyperlinks disapearing

7 more replies
Answer Match 55.86%

Periodically I get the following error when I am using my Outlook email program and try to click on a hyperlink. I am hoping someone can help me with this problem as it is a pain in the butt. I have already checked Microsoft’s website, downloaded and ran the recommended “fixit” with no success. I downloaded a batch file entry for my registry which was written by somebody who had this same problem. If I run this file it corrects the problem for the moment, but then it is back again. It seems if I have closed Outlook and reopened it the problem happens. I have also noticed that it can appear if I open Outlook after waking my computer out of “sleep mode”. As I stated, the problem is sort of intermittent. Here is the info on my system. Any help would be appreciated.

Windows 7x64 Professional. My Office program is 2003 version. Here is the error:

This operation cancelled due to restrictions in effect on this computer. Contact system administrator.
 

A:Outlook 2003 Hyperlinks Not Working

I'm guessing you tried the following fix?

http://support.microsoft.com/kb/310049/en-us
 

2 more replies
Answer Match 55.86%

Good day all

My DB writes reports to PDF with complete success - all bar the ability to make hyperlinks work from within the PDF results.

Does anyone have any experience in this aspect of getting Hyperlinks in Reports to work?

I suspect its a PDF output issue

I know I can export a Word Doc to PDF and get links to work - how do I do in from Access?

Chris
 

A:Access 2003 : PDF Reports & Hyperlinks

6 more replies
Answer Match 55.86%

Hello everyone:

This is my first time posting ever, so please forgive me if I'm unclear...and I'm new to VBA programming...I want to learn it!!

I have an Excel File (See attached example) which was created using karen's Directory Printer of .doc .xls .txt files on one of our drives a work.

I can create an individual hyperlink for a document file in column D using the full path in Column E by right clicking and inserting a hyperlink.
My question/request is: That drive currently has aproximately 8200 files in it. It'll take me a while do hyperlink each by itself.
I have the Column D File names in a named range "File_Name" ='G Files'!$D$3:$D$8829 and Column E "Path_File" ='G Files'!$E$3:$E$8829.
Can a VBA program be created which will Hyperlink the named Column D files to their corresponding named corresponding Column D Paths?
And again, I am brand new to VBA, so any help and examples would be greatly appreciated.

Thanks Willing to Learn Newbie
 

A:Range Hyperlinks in Excel 2003 - XP

I made this macro a while ago, you can just pate a list into A1 and then click the button and it will convert the path to a hyperlink.
 

1 more replies
Answer Match 55.86%

Outlook 2003 hyperlinks
When inserting a hyperlink into an HTML email, I find that I cannot click on the link whilst composing, the recipients will be able to click on the link once it has sent. Is this a 'design feature' of Outlook 2003? just wondering!?
 

A:Outlook 2003 hyperlinks - in a new email?

I've had this problem in Outlook 2000 as well, but it doesn't bother me as a quick copy and paste to use it works for me
 

1 more replies
Answer Match 55.86%

Hi, I upgraded to excel 2003 from excel 2000. The 2003 version modified my hyperlinks puting %20 where there had blank spaces. I found why and took care of that problem, but, it didn't change what had been change. So I need to replace the %20 with blank spaces, and since I have thousands to do I was wondering if there was a way to do them all at once with a macro or something.

Thank you
 

A:Modify Hyperlinks in Excel 2003

7 more replies
Answer Match 55.86%

Periodically I get the following error when I am using my Outlook email program and try to click on a hyperlink.  I am hoping someone can help me with this problem as it is a pain in the butt.  I have already checked Microsoft’s website, downloaded and ran the recommended “fixit” with no success.  I downloaded a batch file entry for my registry which was written by somebody who had this same problem.  If I run this file it corrects the problem for the moment, but then it is back again.  It seems if I have closed Outlook and reopened it the problem happens.  I have also noticed that it can appear if I open Outlook after waking my computer out of “sleep mode”.  As I stated, the problem is sort of intermittent.  Here is the info on my system.  Any help would be appreciated.
 
Windows 7x64 Professional.  My Office program is 2003 version.  Here is the error:
 
This operation cancelled due to restrictions in effect on this computer.  Contact system administrator.

A:Outlook 2003 Hyperlinks not working

That outlook is old and outdated really. Microsoft doesn't even support outlook anymore they have gone to Live essentials live e-mail which is free. It's like 10 times better. It's ok to keep the office word etc, but outlook just stinks and the security stinks you gotta download 2 service packs just to secure outlook. Outlook is just garbage nothing but problems setting up security certs with it. I highly recommend downloading Microsoft Live Essentials and during the install process just check that you want windows live e-mail. Once it's installed migrate over or import your accounts and mail over to live e-mail from outlook.

16 more replies
Answer Match 55.86%

So far I've noticed this layout view (screenshot: http://img543.imageshack.us/img543/7585/ss1kv.png) as being unique to MS Word for Mac. Is that correct?

I plan on getting an netbook soon which will have Windows 7 as its operating system. Does Microsoft Word for Windows have this notebook layout view? If not, does anyone know any alternative softwares, preferably but not necessarily free of charge?

Thanks for your time.
 

A:MS Word's "notebook view" Layout: Is this available on Windows MS Word? or only Mac?

All I have found is that this is a MAC feature only.
 

1 more replies