Tech Problem Aggregator

Outlook 2007: Message "Upgrading Multicolored For Follow-Up ..."

Q: Outlook 2007: Message "Upgrading Multicolored For Follow-Up ..."

Have just upgraded to Outlook 2007. I am getting this message constantly that says ...

"Upgrading Multicolored For Follow-Up Flags to Color Categories..."

What is this? How do we stopped it?

thanks

More replies
Answer Match 102.9%

New Dell 530 computer, new Office Pro package installed by Dell. Everything works pretty smoothly so far, but every time I open Outlook (not Outlook Express), I get a message "A data file did not close properly the last time it was used and is being checked for problems. Performance might be affected while the check is in progress." I can still check email, appointments, etc, but it works in the background and sometimes interferes with the keyboard or mouse. And if the program is open long enough, it reports a message "data file check complete." It's not a huge issue but is very annoying. Any ideas?
 

A:2007 Outlook "data file" message

Hello Judy. Here is an article that explains the error message and provides a resolution to prevent it from occurring again.

Hope that helps.

-- Goku
 

1 more replies
Answer Match 102.48%

My system crashed recently and I have had to restore everything. I reinstalled Outlook 2007 and was able to restore my PST file from a backup I had using the genie backup product. All my files and folders are now restored.

When I click on the send/receive button, I get this message "The operation failed. An object could not be found"

I deleted my email setup account (I'm downloading from my att account) and re set it up using the instructions on the att site. I also ran the 'repair' function off the Office CD and did the Office diagnostics.

Any suggestions?
 

A:Solved: Outlook 2007 wont send/receive - error message "operation failed"

Can you give us the exact message.
Are you saying you did a clean install where you formatted and partitioned the drive?
 

3 more replies
Answer Match 97.44%

This is probably too simple to fix, but I have searched throughout my Outlook options and searched the forums and have not seen where this has been addressed.

When I go to my "For Follow Up" search folder and mouse-over a message, the small pop-up window that gives me the "Received date" and "Size" information about that message used to also tell me in which folder the original message resides. Am I crazy? I'm no longer seeing the "In Folder:" information in this mouse over and I KNOW I used to see that information.

Can someone tell me how to get information about messages in a search folder that will tell me in which folder the message actually resides?

Thank you!!

Kathy
 

A:Outlook 2003 - "for follow up" folder question

...and it helped to read my own question. I have fixed the issue....
k
 

1 more replies
Answer Match 96.18%

I do not know what I did. When I opened a message it open it "Message"; now it opens in "File". How can I get it back to open in "Message"?

A:Outlook 2016 - Message opens in "File", not "Message"

If you minimized the Ribbon, this caused it. Open a message and maximize the ribbon.

1 more replies
Answer Match 92.82%

Does anyone know if its possible to autofill the "from field" as a rule, when your in "another users /delegates" mailbox, so you dont have to add their address in the "from field"? (so it will autopopulate with their email address (and show "on behalf of")?
I hope this was clear.

thanks.
 

A:Solved: outlook 2007 "from field" 'on behalf of" issue

No ... its not possible if the user has more than one delegate (that has added them with the applicable rule). from that point on, they will have to choose which person they want to add to "sent" on behalf of field.

However, If they have just one (one only) user who has added them with that permission (to send on behalf of), it will auto-populate with that user.

So, It does not matter even if they are "in" a specific users mailbox (and expect the "on behalf of" to auto fill with that users name). If they have more than one delegate that has added them with that permission, they will still have to choose which user the message will sent "on behalf of"

i figured this out by trail and error etc
 

1 more replies
Answer Match 89.46%

Hi,

My organisation has just rolled out an Exchange 2007 Server.
I am a desktop support engineer for my unit. We are setting up access to the server through Outlook 2003.

A small number of Outlook 2003 users get this error message when they are using a .prf file to configure their clients.

"Your Exchange Server administrator has blocked the version of Outlook that you are using. Contact your administrator for assistance."

This is XP SP2 running Outlook 2003 (error occurs on Office, Office SP2 and Office SP3) connecting to Exchange 2007.

I have tried tried applying SP2 and SP3 to Office and completely reinstalling Office but it still occurs.

I am told by the Server Administrators that this is a local problem so I am not getting any help from them. I tend to believe them that it's not server side because I set one of the profiles up on two PCs next to eachother. On one it worked fine but on the other it had this error message. I could not see a difference in the two Outlook installations.
I have read this article here http://support.microsoft.com/kb/924625 but a lot of the questions it asks and tests involve having administrator access over the server which I do not have.

Does anyone know of anything in the local Office installation that I do have control over that has been known to cause this?

All the best,

mantis484
 

A:Solved: Outlook 2003/Exchange 2007 - "Your Version of Outlook has been blocked..."

Hi we managed to find the solution so I'm posting it here to help others.

We inherited a number of builds that were done by other companies. It appears these builds have in the past had previous versions of Office installed. This has resulted in registry keys lurking around from the old installs.

Once we removed these registry entries it worked.

Best way to do this that I could think of is to

1) Uninstall Office and then search the registry for any references to Outlook. You can do this using AML Free Registry Cleaner http://www.amltools.com/ (which has a search function). Ignore any hits for Outlook Express you are only insterested in Office Outlook.

2) If this is the problem that you are having then you will find registry entries in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\7.0 or 8.0 or 9.0 etc.

3) Delete any Outlook folders in the above tree. Onc eof the keys in the Outlook folder will be Version and this appears to be what is being read when the server asks what version you have.

4) Reinstall Office - it should now work.

All the best,

mantis484
 

1 more replies
Answer Match 88.62%

I'm getting: "A problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available". This happens within minutes of starting Outlook (in the non-safe mode)

Outlook works in safe mode.
I cannot turn off the addins.... see attached
Also attached is a snapshot from the event viewer...
Thoughts???
Thank you
Running Windows 7 Home Premium Edition (64 bit) SP1
Computer: Dell XPS 435T/9000
Microsoft Office Professional Plus 2007

A:Outlook 2007 "Microsoft Office Outlook has stopped working"

since when are you getting this error. have you tried a repair install from control panel >add/remove programs. you can also let this tool "microsoft office diagnostics" check for errors & fixes.

7 more replies
Answer Match 87.78%

I have Windows Vista Business

I Recently purchsed MS Office ultimate with SP1 and successfully installed it.

It worked just fine.

A few days later I installed 25-40 updates from microsoft.

After reboot when I started any application I got the messge

.." application .. Not installed for current user. Please run setup to install the application"...

I am the only user and I ran as admin / guest but no luck.

I re-installed (repair) - same problem

I un-installed and re-installed .. worked fine. But as soon as I installed updates I got the message.

What is wrong here?

Thanks
 

A:Solved: MS Office 2007 - message "has not been installed for current user"

16 more replies
Answer Match 87.78%

Hi there,
I've searched a lot on the web for the answer to this problem, but none that fit my particular situation.

Recently this error message has started popping up when I use word 2007 on my home computer:

"Word has lost data due to a bad network connection or missing floppy. Documents relying on this data are going to be saved and then closed"

However, despite its threatening intent, I have never lost data. Its bloody annoying because it stops me typing, I press 'ok' and it goes away, only to pop up at a seemingly random time later.

From my ultimately fruitless googling, I have an idea that it is related to me syncing with an external hard drive, and then using this external hard drive at my work computer. When I do this I save directly to my external drive. Unfortunately I have no choice because my work computer crashes if I try to sync it with my hard drive.

I don't know if my suspicians are right or wrong, but I really hope that somebody can help me with this problem!

Thanks for your time.
 

A:word 2007 annoying error message: "...lost data due to a bad network..."

7 more replies
Answer Match 87.78%

I am using Excel 2007 on Windows XP. I have been keeping a daily log in Excel. Yesterday I tried to open the file to make an entry and I received this message; "Expense.xls:: file format is not valid." Any idea what could have happened and how to retrieve the file. I checked all the forums I could find on the subject, but none helped. I have a lot of valuable info in that file and would sure hate to lose it. Thanks for any help.

For ur Refernce, am attaching the file.
 

A:Solved: "file format is not valid" error message in excel 2007

10 more replies
Answer Match 87.36%

I'm having a major problem with excel sending an attachment as and email.
I go to send email and it opens up a new message with the worksheet attached. Above the send button it says "this message has not been sent."
Next I select the person it is going to...and hit send.
The email box never closes and the message still says, "this message has not been sent."
But the email goes through to the person. The issue is that you really don't know if it sent because the box does not close or say it has sent.
Any ideas on how to fix this?
Thanks
 

More replies
Answer Match 87.36%

Excel 2007 Send email "message has not been Sent"
I'm having a major problem with excel sending an attachment as and email.
I go to send email and it opens up a new message with the worksheet attached. Above the send button it says "this message has not been sent."
Next I select the person it is going to...and hit send.
The email box never closes and the message still says, "this message has not been sent."
But the email goes through to the person. The issue is that you really don't know if it sent because the box does not close or say it has sent.
Any ideas on how to fix this?
Thanks
 

More replies
Answer Match 87.36%

Hi!

I got this error message trying to get to a website.

Filenames
Ctrl+Click to followlink. I got this message " This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." I am the only one owner /operator/administrator of this laptop. It is my private property. Please tell me how to fix this problem.
Thanks a lot. Have a great day.
Regards.
Sam
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8139 Mb
Graphics Card: Intel(R) HD Graphics Family, -250 Mb
Hard Drives: C: Total - 588894 MB, Free - 346116 MB; D: Total - 17320 MB, Free - 1901 MB; E: Total - 4055 MB, Free - 1119 MB;
Motherboard: Hewlett-Packard, 1793
Antivirus: Norton AntiVirus, Updated and Enabled
 

A:Error message after "Ctrl+Click to follow link

have you seen this link ? http://support.microsoft.com/kb/310049

This error occurs when there is no default browser set in Windows.
Try the fix mentioned and it should be ok.
 

1 more replies
Answer Match 86.94%

Hi

Am running windows vista home premium with office 2007 professional installed.

About a month or two ago, I've noticed that whenever I close outlook, i get an error message:

"outlook has stopped working"

Everything seems to work fine otherwise, but this is a little annoying and I'm wondering if there's any way to either fix the problem or turn the error warning off.

Thanks
Kevin
 

More replies
Answer Match 85.68%

I have Googled till I'm blue in the face. Looked at a thread here and changed registry settings but still cannot seem to change the default save as folder in Outlook 2007 on an XP system.

I want to change the default "My Documents" folder to an external hard drive. How can this be done?

Thank you.
 

A:Solved: Changing default "save as" folder in Outlook 2007

This article from Microsoft might help:
http://office.microsoft.com/en-us/outlook/HA011265401033.aspx

Good luck!
 

3 more replies
Answer Match 85.68%

I just completed some Windows Updates, and since that time, Outlook 2007 is not working properly. I can no longer receive email from my gmail account. I looked in the Account Settings and noticed that the "Account Type" pull-down menu is grayed out. Any ideas on how to fix this???
 

A:Outlook 2007 - "account type" grayed out after Windows Update

Nevermind - I just deleted the accounts and started fresh. That seems to have worked.
 

1 more replies
Answer Match 85.68%

Hello - strange problem one of our users is having - when she picks up a draft email (she has previously prepared) then sends it, the email is recieved with the draft date, instead of the sending date. This means that the recipient cant see the new message (they will find it in listed as being recieved on the "draft" date). I have been unable to duplicate this error! Has anyone heard of this happening?
(Outlook 2007/Exchange 2007)
Any help very welcome!
Thanks

Jon Morris
C&IT Services
Edinburgh Napier University
 

More replies
Answer Match 85.68%

Hi,

Please help. I have seen a few post about this error but nothing I have tried has helped.

Each time I open outlook a balloon pops up my task bar with the following message:

Microsoft Office Outlook
A data file did not close properly the last time it was used and is being
checked for problems. Performance might be affected while the check is in
progress.

Then the message quickly dissapears before you can even read it properly and outlook closes automatically.
 

A:"A data file did not close properly" when Outlook 2007 is opened

6 more replies
Answer Match 85.68%

I have a user who gets insufficient resources errors at random times during the day.

browsing to her network drives, causes this error. The drive is not displayed.
Printing causes this error. The document does not print
She basically, can't do anything.
The system has 2gb of memory, not a ton, but taskmgr shows there is lots of room there, CPU usage also isn't high.
Programs usually running are
Autocad 2008
Outlook 2007
and random programs.
pdf documents in Acrobat Pro
Internet Explorer 8

I close out Outlook 2007, and the error goes away, she is able to print and continue as normal.
I open Outlook 2007 back up, and she is running fine for a while.

I remember older versions of Office creating a memory leak, which was addressed in patches and service packs, but I didn't think a memory leak issue existed in 2007.
Anyone else seen this kind of behaviour, and if so, solutions?
Spyware, malware, virus free. No google toolbars or yahoo toolbars present.
 

A:Outlook 2007 causing "Insufficient system resources" error

What are the settings for the Swap file?

Can you post the complete error message as it appears on the screen?
 

1 more replies
Answer Match 85.68%

When testing the account settings in Outlook, a pop up window keeps on alerting me to "Enter the Network Password". Cox technical personnel was not able to assist me solve the problem; even though, I have a Cox e-Mail account.

My system is Windows 7; and,
my e-Mail is MS Office 2007

Does anyone know how to get past this problem? Otherwise, I am unable to synchronize my e-Mail.

Thank you,

More replies
Answer Match 85.68%

I installed a MSI MS-3871 WLAN 802.11b/g/n 1T1R+BT2.1 EDR Combo Slim Module on my Intel DX58SO running Win 7 Pro x64 and MS Office Pro 2007.

Desktop Boards — Wireless LAN (WiFi) and Bluetooth* module

The software/drivers for the module added Bluetooth features to the Office 2007 applications.

Every time I reply to an email for the first time, I get the following pop-up error box:

Custom UI Runtime Error in Send to Bluetooth






Quote:
Error found in Custom UI XML of "Send to Bluetooth":
Line: 1
Column: 143
Error Code 0x8000405
Failed to find Office control by ID
ID: FileSendMenu

Two buttons: OK & OK to All


I can disable the pop-up error box by unchecking "Show add-in user interface errors" under "In all Microsoft Office Programs:" in Tools/Options/"Other" Tab/"Advanced Options..." button.

I'd like to know if there is a solution for this issue other than turning off the notification of the add-in user interface error?

How do I troubleshoot this issue?

I have the latest drivers installed. The drivers for the Bluetooth side of the module are from Motorola and the drivers for the WLAN 802.11bgn side of the module are from Ralink.

Bluetooth Devices:

Bluetooth 2.1+EDR USB Device

Driver Provider: Motorola, Inc., Driver Date: 22-Nov-10, Driver Version: 3.0.0.285

Network adapters:

802.11bgn 1T1R Wireless Adapter

Driver Provider: Ralink, Driver Date: 27-Jul-10, Driver ... Read more

A:Office 2007 Outlook "Send to Bluetooth" Error

This issue is resolve for now. The problem is a Bluetooth driver that causes issues with MS Office as well. See the link below for more details:

Word 2007 Copy and Paste Issue

In addition to disabling the "Show Add-In user interface errors" option as described in post 1, you can disable the "Send to Bluetooth" feature under Tools/Trust Center/Add-Ins/Manage: COM Add-ins (drop down menu and click "Go")/uncheck "Send to Bluetooth."

With Win 7, you need to right click the application exe file, select "Properties"/Compatibility and check the box to run the program as an administrator to be able to uncheck the "Send to Bluetooth" options in all the Office applications.

Regards

1 more replies
Answer Match 85.68%

I have Windows XP and am using Office 2007. A week ago my Outlook calendar started showing the wrong date. Today is showing as 11/13/09 and it's 11/19/09. My inbox is grouping my email in "Next week" (It should list it as "today"). All todays outgoing email is dated 11/13/09 on the receiver's end (so my clients don't think they've received it because their email program is filing it under 11/13/09. All incoming email has the right date on it. My sent file has the wrong date. This is bizarre! Please somebody help me.....
 

More replies
Answer Match 85.68%

Hello there,

Outlook 2007 Imap account can't get the new items synced in to its "Inbox" folder. Other imap folders are up to date. The problem is only with Inbox.

The newly arrived items on webmail's inbox are not appeared in my outlook's inbox. When I move it to any other folder on webmail, then it reflects in outlook. (I mean its only outlook's inbox that stopped syncing, while all other subscribed folders do)

The 'updating cached messages' task shows the count as per webmail's inbox count, but it wont actually update all of them. For eg, there are 1500 items in webmail's inbox & outlook's inbox has got just 1000, the task while running shows as 'updating cached messages x/1500' and once the count reaches 1000/1500, it ends.

When an item is deleted from outlook's inbox, it reflects on webmail & similarly when deleted on webmail, its deleted on outlook's inbox as well. The only thing is outlook inbox, which no longer receives new mail.

Have spent ample of time to identify the issue but no luck yet. There are 100+ systems in the network with same setup and this issue is observed in about 8-10 pcs as of now. When the account is reconfigured there is no issue. So the problem is linked to outlook profile or pst which we couldnt figure out & find a fix.

System Spec:
XP SP3 on core2duo with 4GB of Ram, Office 2007 Standard, Symantec Endpoint Protection.

Have anybody experienced this?
Appreciate your help!!

--
Sreenivas.

More replies
Answer Match 85.68%

I often receive emails from my Pet Lover community that have images embedded in the body. I have a special email folder on my desktop into which I used to be able to download the pictures by selecting "view in browser" from my Outlook 2007 menu bar. Google Chrome would display all the images and I would download from there.

All of a sudden, when I select that command, all I get is text. It's almost as if I am looking at the source. I've uploaded a .doc file with the screen shot of what I get from that command.

Any help would be greatly appreciated. I know I could copy each and paste into Paint, then crop, save, etc., etc.. I simply don't have the time for all the extra steps.

Thanks.

More replies
Answer Match 85.68%

Hi -

I'm having some trouble with Outlook XP (2002) and Exchange 2007 and haven't been able to find a solution elsewhere.

Basically, I get a message when I try to log on telling me that the server is down or that there's a network problem. (The exact text is: "Unable to display the folder. Microsoft Outlook could not access the specified folder location. The Microsoft Exchange Server computer is not available. Either here are network problems or the Microsoft Exchange Server computer is down for maintenance.")

To get around this, I have to:

1) delete my mail account
2) re-create my mail account,
and
3) restart Outlook.

Going through this process will allow me to read my mail and access the calendar until I stop Outlook, at which time I need to go through this entire process again.

Another potential symptom of the problem is that if I put a name in as the exchange server in the mail setup window, this whole process doesn't work -- I actually have to put in the IP address. When I click "next" the address is replaced with the name (e.g., "EX03"), which might be related to why it doesn't work the next time I try to start Outlook).

Any help/suggestions would be greatly appreciated.

Thanks
 

A:Solved: Outlook XP (2002) vs Exchange 2007 -- reports "not available"

Sounds like a DNS issue, for some reason it is having problems resolving the hostname to the IP. Make an entry if your HOSTS file for the server.
 

2 more replies
Answer Match 85.68%

Hi I run Windows Vista Home Premium and Outlook 2007. I've set up POP3 access for Gmail and to download mail from mail.bigpond.com (an Australian ISP). Initial setup was fine and I can send test messages to myself.

Recently I've had trouble sending (but not receiving) email via Outlook. The following error message is shown:

Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) email server. If you continue to receive this message, contact your server administrator or Internet Service Provider (ISP).

This message occurs for both my email accounts.

If I reboot the computer, then sometimes the mail will be sent successfully. I've checked the "account settings" on Outlook- and they are exactly as those given by my ISP/Gmail. But when I click on "test account settings", the test message can't be sent.

What's going on?!
 

A:Outlook 2007 "Sending reported error"- can receive mail but can't send!!

Angela,

Refer to the earlier query in this section dated 10th April under heading " OE suddenly asking for Logon Password" which shows possible ways of overcoming this . I reckon it's server problem as I had it re-occur a couple of days ago . My Mail is Btinternet which started rejecting my outward messages. I know that BT uses Yahoo so Isubstituted "mail.yahoo.com" for "mail.btinternet.com" ( OE/Tools/Accounts/Properties/Servers) and it immediately started working . So whatever the ISP says it IS their fault and somehow their systems start rejecting things for no valid reason .
 

1 more replies
Answer Match 85.68%

Hi -

Hoping you can help me. I need to set up an Outlook 2007 rule for marking all incoming mail as read, but it must reside on the exchange server.

The issue is that we need to ensure that all files that are incoming to this particular mailbox are marked as read to prevent them from repeatedly ftp'ing a file to an application server. This is an unmanned mailbox. I've read several forums that say the "Mark as Read" rule can only be set up client side.

Anyone know if that is correct? Or... have any suggestions?
 

More replies
Answer Match 85.26%

I recently upgraded to Office 2007 from Office 2003 and lost the ability to have the next email item opened after deleting or moving an item. I have enabled this feature (Tools -> Options -> Email Options), but there is no change. Both the "open the previous item" and "open the next item" features produce the same results (i.e. "return to the inbox"). Help??
 

More replies
Answer Match 85.26%

Hi all, first post here (great site)

Looking for help with the following problem:

Having a problem with some blank email's within Microsoft Outlook 2007 using exchange 2007, Within some of these messages, I can see the source and attachments with no problems. The messages can also be viewed within Outlook Web Access.

I have re-created the local outlook profile, switched to cached exchange mode, and have even re-installed outlook, and still having same problem. Have also tried disabling the local anti-virus on the machine (mcfee)

The messages can come from any place, either internal, or external to the company.

Any suggestions??? Thanks in advance. Jeremy
 

More replies
Answer Match 85.26%

Hey all,

The basic problem I'm having is that Outlook 2007 is insisting on having two "default" PST files. It doesn't matter which PST files they are, but it insists on two of them--which results in two email inboxes, two calendars, etc. It's annoying and confusing. I've driven myself crazy looking for a fix, but nothing seems to help--I only ever manage to make things worse by screwing with accounts, files, etc. I've re-installed Office, I've tried deleting one of the files, I've tried re-creating my "mail" account with the same email address. If I add a new PST file, I can make it a default, but it just replaces one of the others--and then I'm still dealing with two total. For once, Google doesn't turn up anything--I can't find anyone who's had this same problem. The OS is Windows 7, 32-bit. The problem started when the PST file got moved around when I was switching out my office's old shared drive for a new one, if that's relevant.

I'd greatly, greatly appreciate any help. Thanks a ton in advance. Let me know if there's any information I should've given that I haven't. I can provide screen shots if that'd help anyone help me.

A:Outlook 2007 insists on two "default" PST files

Rename one of the .pst files. Now when you go back in delete whichever one you don't want. Alternatively, create a new Profile and give it a shot.

2 more replies
Answer Match 85.26%

When viewing the list of received messages, I see the date and subject collums; but not the "From" collum. The field chooser option opens; but, when I click on "From", everything in there is grayed out and I cannot add the From field.
 

A:Outlook 2007 Doesn't show the "From" field.

I finally figured it out. The "Field Chooser" item in the manus is misleading. It has nothing to do at all with changing the view of the fields columns.
 

1 more replies
Answer Match 85.26%

I belong to a large group that I send out emails to occasionally. Outlook 2007 on my Vista computer will not let me send to the whole group in one email. I have to split it into about 6 different emails to get it to go. When I was using Outlook 2000 on XP I did not have to do this. What setting can I use to force Outlook 2007 to accept all the addresses I want to enter so I just have to send my newsletter one time?

In a related question...Outlook 2007 will also hang up and not send the email to my group IF there is one email some where in the group that it does not like.
TWO QUESTIONS:
1) is there a way to force the email to go even if there is one bad address in the group and just bounce back an error message on the problem email?

2) Is there a way to make it tell me which email it has a problem with so I can manually remove it? Outlook Express will at least kick back a helpful error message and tell me what email address is causing a problem so I can just remove that name to make the email go to the rest of the people.

Thank you,
Cindy

More replies
Answer Match 85.26%

We have a user who is trying to save an Outlook email (as a .msg), but when she tries to save, she gets the following error: "There is not enough free memory to run this program. Quit one or more programs, and then try again." Outlook is the only program she is running.

Note: The email she is having a problem saving was sent by a user outside our organization. When I had her try to save an email that I sent her from within our organization, it worked. It could it be that the sender used a different version of Outlook when creating their message...could that cause this error?

Thanks.
 

More replies
Answer Match 85.26%

URLs embedded in received messages in Outlook 2007 give the error "The system cannot find the file specified". If I cut and paste the URL into a browser, it works fine. The URL is apparently not being passed to the default browser (IceDragon). I tried making Opera the default browser, but that didn't help.

OS = Win7
Machine = Lenovo T510 with 4GB RAM

Any suggestions will be appreciated.

More replies
Answer Match 85.26%

Strange that Outlook 2003 used to be able to search for and find a dollar sign. My folders are indexed correctly so that's not the issue. But Outlook 2007 just isn't able to search for this type of character it seems. However if you have found a way to do it, let me know I would appreciate it as I often need to do this type iof search.

Anyone else ever had this problem and had any luck figuring it out?
 

A:How to search for a Dollar Sign ("$") -Outlook 2007

8 more replies
Answer Match 85.26%

I'm trying to determine if there is a way to reset Outlook 2007 to a state where it has effectively never-EVER-not-even-ONCE been opened. The /firstrun switch is not sufficient. Removal of profiles from the mail applet in control doesn't actually make it like it's never been run either.

This is a domain environment and, when clicked the very first time, Outlook displays "Configuring Outlook Accounts" and then automatically jumps from there to requesting the user's full name and initials. No requests for settings, no "welcome", none of that.

I need Outlook to be in that state once again without having to completely re-install the OS and everything else from scratch just so Outlook has never actually been clicked on.

Is this possible? Any help is much appreciated....
 

A:TOTAL Outlook 2007 reset to "never been clicked"

7 more replies
Answer Match 85.26%

I keep getting the "Enter Network Password" dialogue box when I try to send/recieive email in Outlook 2007. I have tried repairing the install, resinstalling, deleting and re setting up the user avvount and the registry edit from the link below.
http://office.microsoft.com/en-us/outlook/HA101513541033.aspx

Also, I have setup a remote desktop connection and it won't save the login password for he RDC. I was wondering if maybe these two problems were interreated.

The errore message says the following:
Authentication error has occured (code 0x507)
Remote Computer <IP Addr>

Then it loads the remote PC and I have to type in the password.
 

A:"Enter Network Password" Outlook 2007

is this your own outlook account or a works account!?
 

2 more replies
Answer Match 85.26%

Howdy,
Been searching for this one for a bit. Found loads on Blank Reading Pane however this is slightly different.

Have a home user who some messages are not displaying in the reading pane. These are mainly from Facebook and some various ones from their work colleagues.

When choosing reply message is also blank however selecting Office Button > Editor Options > Display > Hidden Text (checked) the message content appears.

Why then is the message content not visible in the main preview pane? These are just the simple message notifications such as from facebook.

Looked at fonts / mail format (tried all variences) to no avail.

Any help appreciated.

Cheers
 

More replies
Answer Match 84.84%

I want to see the Japanese character for "replace" ?m into a dialog box, but I am seeing a simplified Chinese character instead.  The character is showing up as
I type this, but not when I submit it, so you probably do not know what character I mean.  Anyway, the Japanese character shows up in the body of an Outlook 2007 email, but the simplified Chinese character shows up on the subject line of the same email. 
Do you know what might be behind this and how to fix it?  Thanks.

More replies
Answer Match 84.84%

This problem started out on one of the machines in my office, now it's happening on several of them.

Machine config:
- Outlook 2007
- POP account
- antivirus regularly running/updating/scanning

Symptoms:
- User is running outlook like normal, then all the sudden Outlook gets stuck "Preparing to send / receive". Clicking the Send/Receive button does nothing, and it just sits there forever, apparently never actually making contact with the servers or doing anything at all.

My fix:
- I have to close down Outlook, but that's not enough.
- Open task manager, even though Outlook is closed, there is still an instance of it running on the machine.
- Manually close that extra instance, restart Outlook.

Then all the sudden it works, it sends and receives just fine. I thought the first user may have had a virus, but I've scanned ALL the machines in our office with Symantec Antivirus and nothing came up.

Also, this doesn't appear to ever happen on the two machines in the office who are running IMAP accounts.

Any help would be GREATLY appreciated!
 

A:Solved: Outlook 2007 stuck "preparing to send / receive". Requires manual task end.

nobody has any ideas? Should I include more details, like machine stats or something?
 

2 more replies
Answer Match 84.84%

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

16 more replies
Answer Match 84.84%

I recently built a call log database in Access 2007 for my team to use when calling agents on our top errors we see from a vendor's error report. My boss is requesting a report to see how many items have been resolved

I have a query started and I am trying to complete this task in a single query (if possible) instead of several queries (as I've done for a couple other things).

I have 3 tables I'm using: Assignment, AgtInfo and CallLog
Joins as follows: Assignment.st=AgtInfo.agcy_st
AgtInfo.agt_id=CallLog.agt_id

Fields in the results: Assignment.assigned_analyst, CallLog.rpt_mnth, CallLog.resolved

Resolved is a yes/no field. I've done a query that converts the -1 to a 1, so that the sum is a positive number for the "Yes" values. I'm not sure how to enter the expression to subract the "Yes" values from the total number of values (yes/no) to get to my "No" count.

Essentially, I'd like the results to display as:

assigned_analyst, rpt_mnth, CountYes_resolved, CountNo_resolved

Somehow the connection is just not clicking in my brain with everything I've read though searches. Any help is appreciated! Thanks!
 

A:Solved: Access 2007 Query: Return count of "Yes" and "No" values for Analyst/Report M

It is easier to add another column to counf the Nos, use
0 or is null
as the IIf statement and use a 1 to count them
 

3 more replies
Answer Match 84.84%

hello,

This site helped me cure my Laptop in the past and now I am in the process of aiding a friend whose IE is being hijacked to a suspected Anti-malware site for a product known as "Ultimate Cleaner 2007". He also keeps getting repetative pop-ups for an alleged virus known as "Worm.Win32.NetSky" which redirects you again to an unknown site.

here is his HJT log:

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 8:27:09 PM, on 11/11/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\HPQ\Quick Launch Buttons\EabServr.exe
C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe
C:\Program Files\HPQ\HP Wireless Assistant\HP Wireless Assistant.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Hp\HP Software Update\HPWuSchd2.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\HPQ\shared\hpqwmi.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Docume... Read more

A:HJT log for "Ultimate Cleaner 2007" browser hijacking and "Worm.Win32.NetSky" warning

Welcome to TSG

Please download SmitfraudFix

Double-click SmitfraudFix.exe
Select option #1 - Search by typing 1 and press "Enter"; a text file will appear, which lists infected files (if present).
Please copy/paste the content of that report into your next reply.

Note : process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool"; it is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.
http://www.beyondlogic.org/consulting/proc...processutil.htm
 

3 more replies
Answer Match 84.42%

I have searched the net repeatedly looking for a fix to this issue. I seem to only get solutions for Office 2007/Win XP combinations or Vista/Office 2003 combinations but I need a solution for Office 2007 on a Vista system.

Error:

Task '[email protected] - Sending' reported error (0x8007000E) : 'Out of memory or system resources. Close some windows or programs and try again.'

Task '[email protected] - Receiving' reported error (0x8007000E) : 'Out of memory or system resources. Close some windows or programs and try again.'

What I have tried already:

Delete and recreate Outlook profileUninstall and re-install Office 2007 (cleaned all registry entries also)Used ScanPST.exe and ScanOST.exeDeleted all email accounts and re-added
I thought there might be a firewall issue since Windows Mail works fine but I found out that Windows Mail uses internet settings and not ports like Outlook.
This issue is driving me nuts since I used Windows Mail for about a week now and it's childsplay compared to Outlook!

I know my machine has the specs needed to run WAY more resource hungry apps:

Intel Quad Core Q6600 (2.40GHz)3GB RamMaxtor 300GB SATAII 7200RPM

I even killed all other apps besides Outlook and I still get the same issue.
Any help/feedback/counseling/therapy/bullets/bucket of water would be greatly appreciated

Thanks.

A:Outlook 2007 - 0x8007000E "Out of memory"...

Hi Bizsavvy,

what about this?

MAPI Advise() call returns 0x8007000E (E_OUTOFMEMORY)

5 more replies
Answer Match 84.42%

When running outlook 2007 on my Vista Home Basic, Acer Travelmate 5620, i get the following error:
"MSVCR80.dll was not found" and outlook will not open

i searched the net, and apparently its a problem native to those running office 2007, on acers with Norton. however, uninstalling Norton often doesnt help. I did however find the solution! (well it worked for me anywayz )

Open MS Word
Click on the Office Orb in the upper left of the screen
Click Word Options
Click Resources
Click Diagnose

MS Office will then run some scans and after about 5 minutes, the issue is corrected. Works very nicely.

It took me a long time to find this in Office 2007, but once I found it I figured that there is no better program to fix it then itself. Try it and you will be pleased, I have not had this issue since running this fix.
 

More replies
Answer Match 84.42%

When I click on FORWARD and then add the recipients email address(s) and then click SEND, the message happily goes to the OUTBOX and sits there forever!

Trying to re-forward it does not work and the only way is to copy the contents and paste to a new message and then away it goes quite happily.

Very annoying - wonder waht is causing this?
 

A:Cannot "forward" emails in Outlook 2007

What happens when you click on "send and receive" when a forwarded message is in the outbox?
 

2 more replies
Answer Match 84.42%

I recently formatted my laptop and had to re configure my outlook. Ever since I did this I am getting the following error message in outlook whenever I want to reply or forward on emails: “The operation failed”.

I am using Windows Vista Business. A little help would be appreciated…. J
 

More replies
Answer Match 84%

When I am building a query in Access 2007, the "Sort:" and "Criteria:" selctions don't work when I switch from 'Design View' to 'Datasheet View'.
If I change the query type from 'Select' to 'Make Table' and run the query, the data in the new table mathces the "Sort:" and "Criteria:" selctions correctly.
What is wrong with my Select Query - Datasheet View? This is very annoying.
 

A:Access 2007 "Sort:" and "Criteria:" not working in Datasheet View

10 more replies
Answer Match 83.58%

ok, so I cleaned up all the old programs that I do not use any longer and deleted them from the control panel, add/remove programs, rebooted and about a day or so tried to open up outlook express. the program opened up but I can not "Expand" an email by double cliking it OR I can not even reply to an email as I get the attached screen shots of the error messages I recieve.

I did have this problem a while back but for the life of me I can not remember how it was corrected.

are you able to assist?

thank you
 

A:Outlook Express - Not working, "Address book not found" message

16 more replies
Answer Match 83.58%

All of a sudden I could not find my sent mails in the Sent Items Folder. I looked for help from the forums and got a suggestion to create another profile to test whether I can see my sent mails there. I followed the instructions but there was not enough to lead me through so I don't think I completed creating a profile. Then I got another suggestion to purchase the Registry Booster to clean up my registry. After I did that I was able to see my sent mails again.

However I still continue to see the Outlook Data File Popup with the message "This data file has not been configured. Select an existing file to configure or try the name of a new file to create". After I clicked "OK" then I got another pop up to prompting me to choose a file from the Libraries.Documents directory. I clicked "Cancel" then I got another pop up with "Properities for this data file must be defined prior to use". I clicked "OK" and then I got the Outlook Data File Popup and the same subsequent popups again. After clicking through I was able to start my Outlook but when use the registry Booster to scan I got more error messages. So apparently these errors from Outlook is mucking up my registry. Anyone has any idea about this problem? Please help. Your assistance is greatly appreciated. Thank you. Helen.

A:Outlook 2010 Error message "This data file has not been configured"

Hi Helen,

Firstly, you certainly do not need any registry boosters to solve Outlook data file issues - was this a recommendation made by someone, or was this suggested to you by an automated pop-up? If its the latter, is there any chance you could be infected by some sort of malware?

To solve the Outlook issue, do you know where your Outlook data file is being stored? Can you do a search on your computer for all files with this extension:

.pst

Post back here with your findings. Also, can you tell us about your current system : what anti-virus software are you using. I'm a bit concerned about this Registry Booster : generally speaking, in most cases you really do not need/want to be mucking with the registry at all.

Regards,
Golden

9 more replies
Answer Match 83.58%

Using Windows 7 Enterprise Edition (64 bit) and Office 2010. When dragging a message from mail to the Calendar (in the lower left under the folder list) to create a new meeting/appointment, the calendar dialog will "pop under". How do I get the calendar dialog box to grab focus?

Thank you
-Neal

A:Outlook 2010 - When dragging message to calendar, dialog "pops under"

If you still interested, could you please create and post a screenshot.

3 more replies
Answer Match 83.58%

Today, 25 Aug 2016, my Windows 10 PC loaded Outlook 2013 and at the same time I received the following message:

Thinking the message to be genuine, a file was downloaded called OneDriveSetup.exe which was some 8Mb in size.
Is or was this update genuine?

I have since deleted the file as a precaution. Checking this further, I find that in folder:
C:\Users\Mr Morgan\AppData\Local\Microsoft\OneDrive\Update
There are two new files called:
OneDriveUpdate.exe which is 20Mb and the other is an .xml file called update.xml.
Are these files genuine?

More replies
Answer Match 83.58%

I'm having this problem for last two weeks. Every time I receive this messages, outlook stops responding. It takes from 5 to 10 min to get it back on track. Did everything, I guess, possible with junk and spam filters, nothing stops this annoying spams to get to my in box folder. The messages look like one I attached; always with dashes and separated words like -M-eso-th-el-io-ma or -C-r-ed-it with no sender info and addressed to nobody. Please advise.

More replies
Answer Match 83.58%

I would like to be able to suppress the Out of Office message for particular email addresses (like I could on Lotus Notes!), but cannot see a way to do this.

The need is especially useful for newsletters and other non-manned addresses, because the ooo message triggers an auto response from them which triggers another ooo from me.... well you get the picture.

I also have my home emails copied to my work Outlook account, and when I have the ooo message set, it triggers an ooo message to the sender - I may be out of the office, but not necessarily away from home!

Hope someone can help.
 

A:Outlook 2003 "Out of Office" message targeted suppression

Has this problem been solved?
 

2 more replies
Answer Match 83.58%

I recently received an e-mail that requested a "READ RECIEPT" response via an on-screen
message. I elected to send the response but when I pressed send/receive I got an error
message. However the instruction to send the message still seems to exist and EVERY time
I press send/receive my PC tries to send this message and fails EVERY time.
I have deleted the original message but no change.
In the Outlook Send/Receive Progress box the following information appears:-
Connection to server was interrupted
Error No 0x800CCC0F
Address not verified
Contact ISP

I have pressed Cancel All in this box but no change

Does anyone know how to stop my PC trying to send this message?
 

More replies
Answer Match 83.58%

All of a sudden, an address that I email to often won't go through. I get the message "DELIVERY FAILURE: User [email protected] not listed in public Name & Address Book"

I tried to access help but I can't understand what they're talking about. The address book, or whatever it is, is a mystery to me. It's not related to the "contacts", is it? Because I have all my email addresses in the contacts area. The address book, I don't know.

How do I resolve this?

thanks!
 

A:why do I get "delivery failure" when I send message in Outlook 2002?

are you able to type there address in and send that way?
 

3 more replies
Answer Match 83.58%

Hi,

In the options of a new mail message, you can request a read receipt. I would like to create a button with this VB code behind.

I tried the following code, but something is missing. Who can help me out?

Sub Enable_Tracking()

Dim e1 As Outlook.MailItem
e1.ReadReceiptRequested = True

End Sub

Thanks in advance
 

More replies
Answer Match 83.58%

After reading this site and searching the net, I tried to rename the user, backed up files, started from scratch and tried to import the old files....still no success...I need some actual walk me through it help.....I went to the mail icon in the control panel...set-up a user then associated a data file, in the email section, I tried to switch the default file to the one I wanted....still no luck....Please, if you are very well knowledgeable about Outlook 2003, I need help....I have some business files which I am trying to restore and business contacts to contact so I'm in a bind because Outlook is not working....Stoe

I have a Toshiba Laptop running Windows Vista 32 bit Home Edition.
 

A:Solved: Outlook 2003 Error Message, "can't open the default folders"

Hi stoe2000

Is this a continuation of the same problem from this thread?
http://forums.techguy.org/business-...open-settings-change-default.html#post8031158

Does Outlook 2003 open for you?
 

3 more replies
Answer Match 83.58%

Hello,

I am trying to get my Outlook 2003/2002 Notes Connector to work with Lotus Notes 5.0.11, but I keep getting the following error when I open Outlook: "The local message file can't be accessed. The file is already in use by another user."

Things I've tried to fix this:
1) re-install Notes client
2) re-install Outlook Connector
3) re-install Outlook 2003
4) deleted all but first 4 lines in notes.ini
5) changed the name of my .nst file
6) deleted and recreated Outlook profile (numerous times)

Any help would be appreciated!
Here is the output of my MSOCLog:

<<## ## ##>>MSOCLog Header Size : 1298
Log Date: 4/22/2005 - 03:26:48
Microsoft Windows NT Version 5.1.2600
C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSOC32.DLL
OtoN Version: 2.0.4007.0
C:\Program Files\Microsoft Office\OFFICE11\OUTLOOK.EXE
Module Version: 11.0.5510.0
Auto Download Mode : Download Body
Slow Connection Mode ont get Body On RAS
OtoN Languages :1033;
Office Languages :3081;
Current MUILanguage:0
OutLMime.dll Version: 11.0.5510.0
Mso.dll Version: 11.0.5606.0
InetComm.dll Version: 6.0.2800.1441
NST type: UNICODE
<<b44 22 03:26>> ======================================================
<<b44 22 03:26>> Log Date: 4/22/2005 - 03:26:48
<<b44 22 03:26>> C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSOC32.DLL
<<b44 22 03:26>> ======================================================
<<b44 22 03:26>> ABProviderIn... Read more

A:Outlook Connector for Lotus Notes - "local message file can't be accessed"

Does anybody know anything about the IBM Notes connector (or a URL for it)? Does it use the Outlook interface?

Thanks,
JB
 

1 more replies
Answer Match 83.58%

IF ANYONE HAD EVER ENCOUNTERED THE FOLLOWING SITUATION, PLEASE GIVE ME A HAND. WILL APPRECIATE.

I use the "Outlook Express" for my email for years, no problem.
I had been using ISP for my email server and have my own email account set up, so far so good.
I had checked the box "delete from mail server after deleting from trash" and it works out just good. This is because, no need to log-on the mail server each time to clean up the read emails by hand, this way could release enough space for receiving email. Is because the ISP charge on over-quota space for emails, or just will block excess emails over the allowed space.
The problem started, when a friend told me could set the email folder away from the hard-drive C, I set it as per his suggestion. Then, the "auto-cleaning function" stopped performing.
I asked the ISP and was told because "Outlook Express" is designed by Mircosoft Inc. so they could not help.
Then, I set it back to the "defaulted folder", but the function could not be recovered.
This is quite annoying that I have to log-on the email server and clean up the emails daily by hand.

A:Outlook Express "Auto Delete" message problem in the mail server

This thread was posted on 3-Mar-2010, and were read by almost 100 visitors.
Is it really NOBODY could tell how to solve this problem ?
Then, this is really a big problem !
hklawhklaw

3 more replies
Answer Match 83.58%

Hello,

I'm a new member but have gotten a lot of useful info from this forum over the past couple months, thank you! Hopefully someone can help with this issue.

I have a user at my work who is having an issue in Outlook 2003. When she replies to or forwards a message, the spell check is checking the entire document even though she has the "ignore original message text in replies and forwards" option checked. Here's some info on her setup:

Microsoft Windows XP Professional Service Pack 3
Microsoft Office Standard Service Pack 3
Does not have the "prefix" option set
Uses Word as the email editor

I have read in other forums that opting to not use Word as the email editor can cure this issue, but all of our users use Word as their email editor. Also, this issue just appeared out of nowhere a couple days ago. Possibly a windows update?

Please help!
 

More replies
Answer Match 83.58%

Hello: When I am typing a message in Outlook 2007 on my Vista machine, iy always types off when I type of. Can you help?

Thanks, Albert:

More replies
Answer Match 83.16%

When starting a new message, the "TO" button does not bring up the address book.
 

A:Solved: Outlook 2003 "TO" button in new message doesn't show address book

11 more replies
Answer Match 83.16%

I am using Microsoft-Office 2010 Version 14.0.7109.5000 on a laptop running Windows 7 Home Premium (x64) Service Pack 1 (build 7601). I use Outlook 2010 as my email client for two IMAP Gmail accounts.

I have checked the box within Outlook 2010 options "When replying to a message that is not in the Inbox, save the reply in the same folder". This feature is not working and all sent emails are filed in "Sent Mail".

A:Outlook 2010 "When replying to a message..." is not working

  
Quote: Originally Posted by malon015


I am using Microsoft-Office 2010 Version 14.0.7109.5000 on a laptop running Windows 7 Home Premium (x64) Service Pack 1 (build 7601). I use Outlook 2010 as my email client for two IMAP Gmail accounts.

I have checked the box within Outlook 2010 options "When replying to a message that is not in the Inbox, save the reply in the same folder". This feature is not working and all sent emails are filed in "Sent Mail".


Dear malon,

This was a known issue with Outlook 2010 which has been resolved with the HOTFIX.

Find as Google : Outlook 2010 hotfix package

I hope that it will help you

2 more replies
Answer Match 83.16%

When I click Send & Receive in Outlook, I receive the error message "The Operation Failed." There is no message "An object could not be found."

I had not added or deleted a new profile or e-mail account.

Thank you for any assistance.
 

A:Outlook error message "The Operation Failed"

maybe your mail server is down? when the error happens, can you look at the error message in more detail ?
 

3 more replies
Answer Match 83.16%

I have email service with msn.com. The emails on the msn server are ok. But when I download some html email messages using Outlook 2003, the emails appear with "on behalf of" the sender at the top of the email, and the email message has been blanked out.

Any ideas?
 

A:outlook 2003 "on behalf of" blank message

that sounds like spam. I get blank emails on my throwaway spam account that I use for usenet. "on behalf of" means, I believe, that the from address is different than the sender address, in the email headers.
 

1 more replies
Answer Match 83.16%

By default I use the "HTML" format for my outgoing Outlook messages. Whenever I need to paste something into my message, such as a portion of a Word doc or a website, I normaly like to do this without any formatting. Normally, when you use the "Rich Text" message format instead of "HTML", you have the "Paste Special" option in the Edit menu which allows you to paste only the text without formatting. Why is this option not available when you use the "HTML" message format?

My current work-around is to paste my selection into Notepad first and then into the e-mail but I was hoping to skip this step.

Any thoughts?
 

A:Why can't I "Paste Special" in MS Outlook HTML message?

If you have office 2002, you should have a little icon at the end of the text that you click. The other option is to set the prefrences to use Word as your E-mail editor.
 

2 more replies
Answer Match 83.16%

Hello: I have this problem quite often when downloading my email through Outlook Express. It always occurs at the start of the day, never during the day, although I do “Send/Receive” dozens of times a day.

My email appears to download normally, but then I get this error message:
<<Message number 1 could not be retrieved. Account: 'pop3.phonecoop.coop', Server: 'pop3.phonecoop.coop', Protocol: POP3, Server Response: '-ERR Can't open the message file - it's gone!', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800420CD>>>

Sometimes this message is followed by several more, beginning “Message number 2 could not be retrieved ...” and so on.

I know for sure of at least two recent emails which have been sent but which I’ve never received. Could this be why?

I have three questions:
1. What is this and can I fix it?
2. Can I stop it happening again?
3. Are the emails which couldn't be retrieved lost forever? Or is there any way I can read them, or at least find out who they came from, so I can ask for them to be re-sent?

(Actually, that’s about five questions, but what am I - a statistician?)

Many thanks for any help - what a great site this is.
 

A:Solved: Outlook Express "Message could not be retrieved"

14 more replies
Answer Match 83.16%

Hello tech helper(s),

Thank you in advance for your assistance. I am running XP on a vanilla PC, and have installed IE 7 and Outlook Express 6. I updated IE 7 just last night, to make sure that that is all in order.

All works except for one thing, and it's so frustrating! When I am in Outlook Express, with my Inbox populated by many messages, and I try to do a "Find Message" on that folder, all that happens is that I get a blank results window, regardless of what search criteria I select.

I searched the forum and found one relevant message from long ago, but the answer to that message is not helpful to me.

I've tried various antidotes. I could try to re-install Outlook Express, but doing so seems challenging. And I fear losing my Inbox messages altogether if I do that.

If you can give any advice, I'll appreciate that. In fact, I'm so desparate I'm willing to pay for some effective help.

Thank you,
Raymond Barglow
Berkeley, CA
 

A:Outlook Express 6 "Search Message" Fails

8 more replies
Answer Match 83.16%

Howdy!

Yesterday, I started getting the error message below whenever I try to send an email from my Outlook Express.

Response received is: 550-Message rejected because pool-71-96-2-xx.dfw.dsl-w.verizon.net 550-(DELL2KGWP61) {71.96.2.xx]:1523 blacklisted at list.dsbl.org see

550 http://dsbl.org/listing?71.96.2.xx



If you go to http://dsbl.org/listing?71.96.2.xx <--- IP altered for safety. It tells you that this IP has been blacklisted as one that maybe is sending spam. Okay, that ain't me or anyone in my household! It also says, contact your ISP so... I call Verizon DSL but they tell me it's actually a MSN Outlook issue. Verizon says, the IP it references is one that Outlook makes... creates... or something... when it sends out my email. Huh?! So...



I call MSN only to be told that I have to go to Dell since they made the machine. So... I go to Dell and they say everything that Verizon says is hogwash but it'll cost me $100 for them to fix it. Ugh!! So...



Does this look... sound... smell... familar to anyone??? If any mods need the actual IP lemme know, I'll PM it to you.



Could this have ANYTHING to do with the Microsoft Service Pack 2 I dowloaded a couple days ago??



I hope... Read more

More replies
Answer Match 83.16%

I have a nested "IF" statement that inlcudes the "OR" function because I have more than 7 logical tests. One of the logical tests looks for two fields to be true in order to return the "value if true". If either or both fields are false, then the "value if false" is returned, in this case zero. When the value of the first field is correct, but the value of the second field is not correct, zero is returned, which is the "value if false" and a correct return.

However, when both fields are false, the formula is returning the word "FALSE" instead of zero.

The attached file shows these returns and the formulas. Cells F2-7 are corrrect returns (highlighted in green), while cells F8-11 are not correct returns (highlighted in red).

Any ideas on how to return the "value if false" (zero) in cells F8-11 would be appreciated.
 

A:Solved: Excel 2007 - Nested "IF" formula using "OR" Function

8 more replies
Answer Match 82.74%

I've just re-installed Office 2007 on Vista Ultimate x64, and when I imported the PST that I exported from Office 2003 (that was on my XP machine), it froze, and I had to use Task Manager to close it.

Now, when I open Office 2007, it just "freezes". I check task manager, and it's using 25% CPU resources (100% of one of the cores on my Phenom Quad). I can't click anything. I can't move the window around. Nothing. And it does not show "Not Responding" as is usual when a program crashes in Vista.

SCANPST shows no erros in the PST files.

How do I fix this?

A:Outlook 2007 "Freezes"

Out of curiosity, have you ever let it run just to see if it will sort itself out? (Oh, and in the text of the post, you mean Outlook, not Office, right?)

I had the issue with Outlook once when I had corrupted the file and it had to sort itself out. 2 minutes later, it was fine and the problem hasn't recurred.

Also, do you have all the Office updates (there have been quite few)?

If not, I'll look around for a few things. I wonder if they changed format from 2003 to 2007 so that they aren't really compatible. Or, maybe that's what's going on; some of the conversions can take awhile, especially if your file is big (think of how long it can take to convert a large .docx to .doc).

Anyway, if you could give me that information, I'll get to work on solving this one for you.

5 more replies
Answer Match 82.32%

After trying a number of things suggested by the forum I still had intermittent problems and STOP messages including some freezes and finally a continuous loop STOP error. I called an engineer in who opened the case and discovered that my modem was sited immediately up against my graphics card, not allowing the fan to cool it and so it was overheating and causing all the problems. The offending modem has been removed (I am on broadband and so don't use it) and the problems have stopped.
Hope this may be of use to anyone else who has similar problems.
Incidentally the computer is made by Tiny so presumably they build all their machines this way.

Ariadne

More replies
Answer Match 82.32%

Outlook Express 6 on Windows XP Home SP 3 messages have a "From" header, and there my email address is displayed. Due to this, it often happens that my just sent emails come straight back to ME! Is there a way to remove this "From" header, or is it there by default?
Help please anyone?
 

A:Outlook Express "From" message header

Open OE
Click on "Tools"
Click on "Accounts"
Click on "Properties
Remove the Reply Address field (with your email addy in it)
Apply Ok

Test again
 

6 more replies
Answer Match 82.32%

ok...this is my first time posting, hope i do it right. when i send a message in outlook (not outlook express) i get an immediate response from the 'system administrator' saying my message is undeliverable because "no transport provider was available for delivery to this recipient". i have no clue what that means or what to do about it. any help would be great! thanks.
 

A:Outlook "undeliverable message" question...

http://support.microsoft.com/defaul...port/kb/articles/Q197/4/17.ASP&NoWebContent=1

Has it ever worked? Are you sure your smtp and pop3 settings are correct?
 

2 more replies
Answer Match 82.32%

Does anyone know what it means when messages in the Sent Mail folder in Outlook Express have a header line "This message is being Watched"? This appears in a beige bar above the "From" line in the email. All my emails prior to 12/2/01 show this message, and none after that date show it -- and of course the Microsoft help site provided absolutely no information.
 

A:Outlook Express "watched" message

From a newsgroup thread:

"From outlook express' help:

In both mail and news, you can watch a conversation that is of particular
interest you. A conversation is an original message and all its replies.

In your Inbox or newsgroup message list, select the conversation you wish to
watch, and on the Message menu, click Watch Conversation.
If your message list's Watch/Ignore column is turned on, the watch icon
will appear next to all the messages of a watched conversation.

Tip
You can customize the color of your watched messages to make them stand out
better. Click the Tools menu, and then click Options. On the Read tab, at
the end of the Highlight watched messages with the color line, select the
color you want, and then click OK."

Cheers,
 

3 more replies
Answer Match 82.32%

This is a friend's computer, Win XP (Home) SP3, 512 MB RAM. He uses Outlook for his email, and when he gets the emails, these go either to inbox, junk and SENT folder. I have searched for this error, but have not been able to find a solution. Why would incoming emails go to sent folder? Many thanks for your help.
 

A:Incoming message going into "sent" folder in Outlook

you need to check if there are any rules set up in Tools > Rules and Alerts that would cause this action. If there arent any post again.
 

1 more replies
Answer Match 81.9%

Some weeks ago I was looking how to get rid of the "click to follow link"-text that appears in screentips in Word. I didn't find a solution on the internet.
I study Spanish and I wanted to prepare a Spanish text, with the translation of some words to Dutch in screentips. I knew how to do that with bookmarks, but I wanted to get rid of the "click to follow link"-text.

But here is the solution:

Select the word you want the screentip to appear when you hoover the text.
Go to References and insert a Endnote
In the Endnote, type the text you want to appear as screentip.
Now, when you hoover the text, the text in your endnote will appear.
You just need to do some make-up:

select the number that indicates the endnote and give it a white textcolor.
apply a specific format for the words containing a endnote [italic, underline, bold, red, ...]
select all the endnotes and give them a white textcolor

 

More replies
Answer Match 81.9%

Hi, I kindof feel bad asking people to give me their time to help me with this problem, before I posted I did my own research and would have tried to fix it on my own but seems that someone with more knoweldge needs to look at the results of different tests being done so...Im hoping someone here can help.

Every computer in my house is getting about 45mbs download, except mine, which gets about 5mbs. Im guessing I am infected with something. I do have a couple programs installed that I got from torrent (Photoshop, Acrobat, and a couple others). In retrospect was probably a bad idea.

I am running windows 8.1

I have Webroot Antivirus which is always running.

I would really appreciate any help. Many thanks,

Jordan

PS: below is my system info (strangly it says my virsu protection is Panda disabled...I had that a while ago but uninstalled it, fo a while I have had Webroot and just checked, it seems to be running.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Celeron(R) CPU N2815 @ 1.86GHz, Intel64 Family 6 Model 55 Stepping 3
Processor Count: 2
RAM: 3966 Mb
Graphics Card: Intel(R) HD Graphics, 2047 Mb
Hard Drives: C: Total - 455320 MB, Free - 102916 MB;
Motherboard: ASUSTeK COMPUTER INC., X200MA
Antivirus: Panda Free Antivirus, Disabled
 

More replies
Answer Match 81.9%

Well- I tried everything- Trying a PCI card... removing the battery... replacing the battery- tried another monitor... all my devices are getting power to them.... so i think im stuck with a busted mother board -_-

for everyone that helped: thanks so much for all the help!

if there's anything else i can try before i burry my mother board in the back yard im all ears
 

A:" Computer- not sending a signal to my monitor..." Follow up-

6 more replies
Answer Match 81.48%

Hi,

I have started getting this as an error message on opening Word 2007.

"Word could not create the work file. Check the temp environment variable."

Am not able to save any word document. Also, on trying to close Word I get this error message;

"Changes have been made that affect the global template, Normal.dot. Do you want to save those changes?"

Have checked my environment variables, User Variables are set to as under;

Variable - Value
Temp - C: Documents and Settings/ABC/Local Settings/Temp
TMP - C: Documents and Settings/ABC/Local Settings/Temp

Also, the Value in the registry HKEY_CURRENT_USER >Software >Microsoft >Windows >CurrentVersion >Explorer >User Shell Folders >Cache is as %USERPROFILE%\Local Settings\Temporary Internet Files.

Pls assist in resolving this issue.

A:Word 2007 Error Message: "Word could not create the work file."

There are 2 registry paths to change:
HKEY_CURRENT_USER >Software >Microsoft >Windows >CurrentVersion >Explorer >Shell Folders
HKEY_CURRENT_USER >Software >Microsoft >Windows >CurrentVersion >Explorer >User Shell Folders

Both have the "Cache" String which should be changed. And the correct Win7 Cache path in both entries is

%USERPROFILE%\AppData\Local\Microsoft\Windows\Termporary Internet Files

2 more replies
Answer Match 80.64%

(Pardon the misspelling in the title)
I have a distribution list with hundreds of email addresses. I want to save/export the list in Rich Text Format. When I try to do this, I get this "Out of memory..." error. Anyone know how to solve this?
 

A:MS OUTLOOK: "Out of memoey..." message

Is this client fully upgraded in service packs for office? Also does this email setup use any 3rd party connectors or is his straight from Outlook contacts?
 

3 more replies
Answer Match 80.64%

Outlook 2003:I'm a massive fan of outlooks Search folders, I receive in excess of 400 emails per day, of which approximately 250 need my attention, even if to reply back and give someone an answer.

A problem I find is that I am so busy with my emails, I often need to clean out my inbox. I do this by setting up basic search folders such as "all emails from my team which are in my inbox only" or "any email sent to me which was part of a distribution list in my inbox only" etc...

This is great for filtering my mail and I would like to create a rule as such:

"All mail within my inbox which has been either replied to forwarded by myself".

I can't seem to find any options and I'm hoping an Outlook guru can help

If you don't know the answer, can you try googling it for me to see if you can find anything, loads of heads are better one...

Thanks in advance
 

A:Outlook 2003 - Search Folder: viewing "replyed to" & "Forwarded" mail

52 views and no replys? - come on guys I thought this stuff was easy for you lot
 

1 more replies
Answer Match 80.22%

Hello,

I'm hoping someone can help me. I'm using Outlook 2003. I'm designing a new Contacts screen, which better suits the needs of my business.

I have been able to figure out how to everything except for this:

How to I design the "date" and "dollar amount" field values to default to blank/empty instead of defaulting to the word "None" in the case of the "date" field and "$0.00" in the case of the "dollar amount" field?

Any help or direction would be greatly appreciated!
 

More replies
Answer Match 79.8%

Microsoft Updater says I have a critical update (KB2286198) to install but it fails and gives the message: "WindowsUpdate_80246007" "WindowsUpdate_dt000".

I've tried a couple of things that MS Support suggests but they don't work and don't seem to really apply to this particular error message. Searching for the error code 80246007 hasn't yielded anything yet that works.

Any ideas?

Gateway GT5622
x86 based PC
Processor Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz, 1800 Mhz, 2 Core(s), 2 Logical Processor(s)
Operating System Name: Windows Vista
Operating System Platform: NT/2000/XP/Vista
Operating System Major Version: 6
Operating System Minor Version: 0
Operating System Build Number: 6002
Service Pack Description: Service Pack 2
 

A:Update Error Message "WindowsUpdate_80246007" "WindowsUpdate_dt000"

6 more replies
Answer Match 79.8%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 79.8%

Hi all,

I know that before asking for help one has to follow up the steps suggested here however I can't event start because my laptop is so corrupted that I can't even save a log of hijackthis.

For some reason I can't even go online because my usb dongle is not recognised... so I can't carry on with the steps... I need a more drastic approach to analyse and remove the malwares... i tried to download a free antivirus from another pc but it doesn't help because again... i can't download the entire antivirus but only a download file ... but then for some reason my laptop get stuck... i remove hundred of spywares and trojans with superantispyware .. this is the only tool that seems working...

please help me out with any suggestion!
cheers
 

A:I can't follow up the "must read before posting"

Closing duplicate, please see here:

http://forums.techguy.org/virus-other-malware-removal/1126726-full-malwares-help.html

eddie
 

1 more replies
Answer Match 79.8%

Hey guys',

This is the unit I managed to somewhat fix yesterday. Just wanted to check w/ the experts 1 last time to make sure
no malicious threats are lingering about. I saw something in this HJT log file "worm radar". Also think my HJT needs
updating ?

Anyone can please advise. "no rush".

Thanks so much.

Logfile of HijackThis v1.99.1
Scan saved at 11:24:22 AM, on 5/21/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.21228)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\WINDOWS\system32\imapi.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\Program Files\AVG\AVG8\avgcsrvx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\LClock\LClock.exe
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://us.rd.yahoo.com/customize/ie/defaults/sb/msgr9/*http://www.yahoo.com/ext/search/search.... Read more

A:Solved: Please check HJT log. "Follow-up"

14 more replies
Answer Match 78.96%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 78.54%

Hi

days ago i have this problem since i started outlook 2007 when i try to open it's shows me the following message "Cannot open you'r default email folders. the information store could no be open." Even when i create a new user profile in order to connect outlook 2007 with the server exchange. it;s giving me the same error, i reinstaled microsoft office and this messages still showing up.

Could somebody help me, any information about how to fix this problem would be helpul.
 

A:When I try to open outlook 2007 says "cannot open your default email folders"

Hi

Your default emai folder is your PST file and is usually located in the following path (change my name for yours)

C:\Documents and Settings\ididmyc600\Local Settings\Application Data\Microsoft\Outlook.

Its possible that you dont have the rights to the folder or the drive.or similar.

Regards
 

4 more replies