Tech Problem Aggregator

Solved: Copy and enlarge a printed document

Q: Solved: Copy and enlarge a printed document

I have Compaq vista laptop with HP deskjet3050A connected. As far as I can see the printer is not able to do copy enlarging, as my last printer did. I want to make a copy of a hard document with enlarged font size. Is there any "work-around" I could try to achieve this? Allan.

A: Solved: Copy and enlarge a printed document

It seems there are enlargement options. Have you see this link?
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02522553

3 more replies
Answer Match 87.36%

When Im protecting a document in Word 2003 and allow exceptions, the exceptions have a grey box as a placeholder. This is printing out as faint grey lines on the printed version. Is there anyway to change the colour of the placeholder (it looks like a field) - or get rid of it entirely?
 

A:Protect document in Word 2003. Place holders showing on printed copy

Hi LoloPerth, welcome to TSG.

If the exceptions use the same shading that field codes do, it might work to turn off the field code shading. You can go to Tools/Options and change the dropdown box under Field Shading to Never. Let us know if that has any effect.
 

1 more replies
Answer Match 80.64%

I can't see the printed material that I send or what comes to me.

More replies
Answer Match 79.38%

When I use Word, normally there is a white area
representing the paper where I type and a blue
background. The white "paper" usually is about
two thirds the width of the window. The other third
is the blue background split equally on each side
of the "paper". So in other words, one sixth blue,
two thirds white, one sixth blue. The height of the
"paper" is the whole window from top to bottom. In
fact, it goes beyond the screen. I have to scroll down
to see the lower portion.

Above is what I normally see when I open a Word document.
But now, when I opened a new document, the white area was
about half its normal size. It's only about one third the width of
the window and about three quarters the height of the window.

I don't know why this happened all of a sudden. How do I get
back the normal size document?

Thanks.
 

A:Solved: Why Is My Word Document So Tiny? How Do I Enlarge It?

6 more replies
Answer Match 68.46%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/
 

A:Scanned document when printed out........

16 more replies
Answer Match 68.04%

I doubt that I can post this question here but I assume it'll be removed if not.

I have an HP printer, 2540, wireless printer. Works fine.

I started to print a pdf file. Because it was a large file I choose the 'booklet' option, which prints 4 pages on one side, then, when everything of the even numbers (I think, not sure) has printed, you will get a message on the pc telling you how to replace the already printed pages in the printer so it can print on the backsides.

When I saw the first batch I decided I didn't like it. So when the message with instructions on how to replace the already printed paper, I went in the printer's menu, highlighted the name of the document and did 'cancel'. In this printer menu it now said it was 'deleting' the document. But it didn't. I waited about half an hour. I turned the printer off and back on. I closed the document. But still the printer menu said 'deleting'.

I opened the document up again, changed the settings for the printer (as in one sided, normal size) and accidentally hit 'print'. I then noticed that - in the printer menu - the 'new' document showed up above the one that still said it was deleting. But it still didn't print. I went in the print menu again and highlighted the new document and did 'cancel' and it did cancel it.

But the old document is still sitting there, 'deleting'. I can not get past that. Any suggestions wo... Read more

A:Cannot delete partly printed document from cue

There's a way to force these to delete, if you don't mind a little typing. You need to open a command prompt by running cmd.exe. If you're unsure of how to do that, tell me which operating system you're using and I can walk you through that. This should open up a black window, and you need to type in the following commands sequentially, hitting the Enter key after each command.
net stop spooler
del %systemroot%\system32\spool\printers\* /q /f /s

net start spooler
The first command stops the printing service, allowing you to carry out the second command, which deletes any jobs in the queue. The last command re-starts the printing service, and you can try running a test print. Once that's all done, you can just close the black window.
 

8 more replies
Answer Match 67.2%

Hp Deskjet F2180 all-in-one
Windows XP
wierd problem, i do cleaning of my catridge by printing services all 3 options, clean, inetrmediate and prime, the result is perfect but when i print anything from a software, any text or photo from msword or photoshop or notepad, the printed out put is streaked and blurry totally unreadable. Is there anyway i can fix this at all
i am attaching 2 images, 1 is test page print and 1 is an auto print after doing the "intermediate clean", i printed the test page after intermediate clean
thx for the help
 

A:output streaked only when a document is printed from software!

7 more replies
Answer Match 67.2%

Hi, one of my clients is using the Epson ex 330 dot matrix printer on a windows xp sp 2 machine. Now this printer stopped working on this machine since the 24 pin port on the motherboard got spoilt. So I tried to connect this printer to this machine using a USB to parallel port converter. Now the thing is that the printer is added but when I try to give a test page print or any other print the print spooler shows 1 doument printing. But within 3 seconds it disappears and prints nothing with no error message. Another thing is that this printer used to run on the Epson LX 800 driver since there is no EX 300 driver is the default drivers list. And now I have added it on the same i.e LX 800 driver. But I don't think this should be any sort of problem. Expert help is appreciated. Thanks!!
 

More replies
Answer Match 66.36%

I'm helping to develop a web application that uses iframes. On the main page (outside of all frames), we have a div that we use to display and print forms. We also have 2 nested iframes; the innermost iframe contains the main page content. When printing, we use extensive CSS and Javascript (contained in the outermost window) to hide everything except the print div.

When I use File > Print Preview, it always displays the correct preview; that is, the outermost window which contains the print div. Printing from the Print Preview works as it should. However, when I use File > Print, it seems to print whatever window has focus, not the entire page (outermost window). Therefore my print div doesn't get printed and all I get is a printout of whatever is currently onscreen. Why doesn't the print out from File > Print match what is shown in the print preview?

A related issue occurs when using JavaScript's window.print(). When I call window.print from within the print div, it prints as it should. But when I call parent.parent.window.print() from within the double-nested iframe, IE still only prints the window that has focus, not the outermost window (as shown by "parent.parent."). And since they just clicked on a button in the innermost frame, the innermost frame has focus, my print div doesn't print and all I get is a printout of whatever is currently onscreen. I have been using "parent.parent" for all other Javascript calls from the nested iframe to th... Read more

A:Print Preview doesn't match printed document in IE 8 & 9

Have you checked out how other people deal with printing on web?
Take Gmail, for example. When you click on Print link they open a new tab with desired content, which shows print window immediately on opening.
Code:
<html>
<head>
bla-bla-bla
<script>
function Print(){document.body.offsetHeight;window.print()};
</script> </head>
<body onload="Print()"> ...
or for a new tab other companies do more direct
Code:
<body onload="window.print()">

1 more replies
Answer Match 64.26%

I downloaded a document that has text so small that when I printed it out I can't read it (a pdf). How do I enlarge the document so that when I copy it I can read it? I can't find the answer anywhere in the printer's on-screen manual (it just says how to change the paper size you are copying it to). My printer is a Canon MG3122. Thank you.
 

More replies
Answer Match 61.74%

I have recieved a file from a colleague that is copy protected. I need to change a few bits round but cannot 'select all, copy & paste'.
How is this done and is there any way round it?

Thanks in advance

BD
 

A:Solved: Microsoft word copy protected document

6 more replies
Answer Match 61.74%

Hello Everyone.

I need a help with the VBA macro.

I have one excel file & a word file. I need the data in the excel sheet to copy in to the word document.

This is what i need,

1. When you open the excel file, it has two columns Units & Comments.
2. The data in the Unit column need to replace this "XXXXXXXXXXXXX" in the word document,
3. The data in the Comments column need to replace this "cccccccc" in the word document,
4. once the unit column & comments column data is copied in to the word document. I need the word document to be saved with the file name of "XXXXXXXXXXXXX".

As a end result, i would have each file for each row in the excel file.

Is this possible? Could someone help me with this thing?

Thank you so much for looking in to this,
 

A:Solved: Copy data from Excel to Word Document

10 more replies
Answer Match 61.32%

I'm using Windows Xp on a network with Microsoft Word 2002.

I have one document of about 48 pages. Whenever I want to copy paste within this document or from this document to another document, Word freezes. It does not give an error message.

When I email it to someone else, they can open it and copy paste just fine. If they modify it, save it, and send it back to me, I still can't copy paste form it.

The IT guy reinstalled word, reformmatted my computer. no luck.

I went into the registry and deleted the Data files , as was recommended on another website, no luck.

I couldn't find my normal.dot file, so I didn't do anything with that.

EDIT***
Let me just clarify something - I can copy paste just fine from all other documents.

While copy paste seems to be the fastest and most reliable way to make Word freeze (it happens everytime), A few other things have also caused a crash. The only specific one I can remember at the moment is CTRL-Z
***

I would greatly appreciate any suggestions!

Thank you!

ann
 

A:Solved: Word 2002 - only one corrupted document will not copy/paste

14 more replies
Answer Match 60.48%

Hi

I am stuck at work and want to copy the Microsoft Outlook Calender Window (the whole page not just the calender) onto a word document so i can the edit, add arrows etc..... i am using Outlook 2000.

Any ideas if this is possible.

Thanks

Swanny65
 

A:Solved: Copy Microsoft Outlook Calender Window into a Word Document

You can go to File/Save as Webpage, and then open the webpage in Word.
 

2 more replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 52.92%

I have a pdf document that I downloaded from the internet. I just want to copy the text of a paragraph or two to cite as a quotation in another work--fair use and the source is duly noted. However I am unable to highlight any of the text in order to copy it to the clipboard. I have downloaded the trial version of a dozen or more so-called "pdf copy text protection removal" programs, but so far nothing seems to work. What am I missing? Does anyone have a clue?

Thanks for any and all responses!

A:Can't Copy Text From pdf Document!

Capture it with the snipping tool and print it, Then scan it into Word. Might work!

9 more replies
Answer Match 52.92%

I've a CD with some files on it and I've run a command from the Command Prompt to get all the files name listed in a word document. However is there a easiest way to do so??? please help

A:Copy to word document

You might be able to achieve that goal with this utility: http://www.extrabit.com/copyfilenames/

3 more replies
Answer Match 52.92%

I don't know what app to use to open a document in windows 10 where I can copy and paste off of it. I read it was Microsoft Edge, wrong.

A:Which app should I use to open a document so I can copy and

I don't believe Win 10 itself has such an app. Sometimes your computer manufacturer will have included something. Otherwise you need a package such as Word or equivalent. WordPad might open it a\s text but it is likely to be punctuated with some unreadable characters.This freebie will do it (and more besides):http://www.kingsoftstore.com/Always pop back and let us know the outcome - thanks

6 more replies
Answer Match 52.5%

Hi, I think many has this problem as I found it in other forums without clear response. Sometimes my Internet Explorer 9 does not like Adobe Reader 9. So I open a document pdf which has no security issue, and I just click on the save a copy icon. The icon responds with a virtual click. And that's it. Does not appear the radiobox where I can chose where and how to save. Nothing happens. And I can't find the downloaded pdf in any temporary folders either (I can index system folders and do a search there). So I have to go to another computer where I do the same in Firefox and it works, I can save the pdf file. But this is not OK that I have to use someone else's computer. I just wonder why these intelligent guys who create IE and AR can not make something that works? And since years this problem has been existing. Any idea how to patch it? Cheers and happy new year !

A:Save a copy of a PDF document open in IE9 does not do anything

In IE9, enable the classic menu-bar which is disabled by default.

Now when you open a PDF in IE9 via the Adobe Reader plugin, just click File >> Save as. It will save it as a PDF file with a default filename.

3 more replies
Answer Match 52.5%

I want to Know how to scan a document and edit it, whenever i scan it comes as image and there is no place for doc. am connected to my HP throug USB cable.

More replies
Answer Match 52.5%

Hey I am creating a document template in Word and in Excel to send to my employees.

Now I don't want them to make changes to that particular template so what I am trying to do is If they try to edit or make any other changes, it should open a same document for them to edit in or ask them to save it as a different file.

I am not sure if putting "Read-Only" permission would help?

A:How to open a copy of the document once clicked

Welcome to SF.

File -> Save As -> Tool -> General -> Read Only

3 more replies
Answer Match 52.5%

If I have the excel file A:
Code:

[FONT=Arial][SIZE=2]Ref [/SIZE][/FONT][FONT=Arial][SIZE=2]Value //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]1 [/SIZE][/FONT][FONT=Arial][SIZE=2]12 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]2 [/SIZE][/FONT][FONT=Arial][SIZE=2]45 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]7 [/SIZE][/FONT][FONT=Arial][SIZE=2]23 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]9 [/SIZE][/FONT][FONT=Arial][SIZE=2]67 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]12 [/SIZE][/FONT][FONT=Arial][SIZE=2]12 //[/SIZE][/FONT]

And The excel file B:
Code:

[FONT=Arial][SIZE=2]Ref [/SIZE][/FONT][FONT=Arial][SIZE=2]Value //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]3 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]5 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]9 // [/SIZE][/FONT]
[FONT=Arial][SIZE=2]12 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]14[/SIZE][/FONT] //

I whant to create a macro the user can chose to run in the file b, that takes valus from file A if the rows have the same Ref value.

Uppdated file B:
Code:

[FONT=Arial][SIZE=2]Ref [/SIZE][/FONT][FONT=Arial][SIZE=2]Value //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]3 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]5 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]9[/SIZE][/FONT][FONT=Arial][SIZE=2] 67 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]12[/SIZE][/FONT][FONT=Arial][SIZE=2] 12 //[/SIZE][/FONT]
[FONT=Arial][SIZE=2]14 //[/SIZE][/FONT]

I gues this is quit simple, but, I'm new to this and need some guidlines. I'... Read more

More replies
Answer Match 52.5%

I am trying to minimize and copy the size of a document - cannot work out how to do it.

A:copy and minimize size of document

Hi there @karanadowns?Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are are trying to minimize the size of a document for copy purposes. I am happy to assist you with this. From the Forum you have posted in, I assume that you are using an HP Sprout. What software program are you using that you wish to modify or control the size of? Please let me know so I can look for a relevant answer for you.

1 more replies
Answer Match 52.5%

I have a 250 GB hard drive. I put 30 GB for my C, and the rest in D. That's not enough room for C. I have about a GB left. I removed the partition for D, which is now, not in C, but "unallocated." Sheeet! That's not what I intended. I have both C and D already backed up, but surely there must be some way to increase the size of C.

How do I go about enlarging C? Any suggestions would be appreciated.
 

A:Solved: I want to enlarge C Drive

16 more replies
Answer Match 52.5%

This is probably an easy one for you guys but as far as printing , resizing etc goes I don't have a clue.
I have a project on a piece of A4 paper , it has text and pictures on , I need to make the text and the picture slightly bigger and then print it.
I have irfanview , HP imaging director , microsoft office pro 2003 and an all in one printer , scanner , copier but every time I try to resize the document after scanning it , it seems fine on the print preview but it just prints it the same size as I already have it , Grrrrrrrrr !
I know this is probably very easy to do but it's got me bamboozled so please help me , thanks in advance !
 

A:Solved: Enlarge , then print !

10 more replies
Answer Match 52.5%

I recently used Windows Movie Maker to make a slideshow video. After I completed it, later I went to open some pictures in "My Pictures" and also on my desktop. When I try to double click them, nothing happens.
 

A:Solved: Pictures won't enlarge

8 more replies
Answer Match 52.5%

I am unable to enlarge my web page. I went to Control Panel, Appearance & Themes, Display and tried but it never enlarged. Please help. thanks, Orion
 

A:Solved: Enlarge my web page

16 more replies
Answer Match 52.08%

I am trying to put together a package, made up of several different word documents. Some of the information is the same from one document to another. Is there anyway I can put in a formula or something to have the information transfer to all the different documents, in the appropriate place within the documents, without copying and pasting it each time? Ideally I would like to be able to put the information on the first document, which happens to be a label, and then have certain fields automatically copy to other fields in multiple documents. Not sure if this is possible, or if it is just wishful thinking.
Thank you to anybody who can help me.
Alanda

A:formula to copy text from one word document to another?

Hi Alanda,

I suspect that what you are trying to do could be accomplished by setting up a macro. GO HERE and see if that will help you out.

Good day!

Mike

3 more replies
Answer Match 52.08%

Hi all

I'm sure that this is possible. I have a MS Word document minimized. For now let's call it WordDoc1. I also have an Excel workbook opened. This workbook contains many worksheets. Is it possible to create a macro that does the following?:

I preselect (highlight) a cell or range of cells. When I execute the macro, the cells get copied from the Excel worksheet to the minimized WordDoc1 (I assumethat somehow you have to maximize it). When I preselect (highlight) a different set of cells in the workbook, and execute the same macro again, the new range of cells get copied below the first row in the WordDoc1, etc.

Thanks in advance.

Mario
 

A:Copy a range of cells into a MS Word Document

10 more replies
Answer Match 52.08%

I know this is simple but it is the first time I have tried this. I have an e book stored in my documents and I want to copy it to a disc. I open the document and put a new disc in the d drive. When I hit save it says the disc is full. It cannot be and I have tried numerous discs from the same container. Please help.
Thanks
 

A:Making a copy of a document to disc drive

You need to burn it to disc using your writing software (Nero?)

Also check:

Start--> Run--> services.msc
IMAPI CD-Burning COM Service is not disabled, and is started (you can just double click on the service to change its startup)
This will allow you to drag and drop directly to blank media in My Computer
 

1 more replies
Answer Match 52.08%

My boss asked me to create what is essentially a sign in sheet for employees on various sites – which was simple enough in Excel. However, he now would like to include sequential page numbering that will continue on each time the one page document is printed. So if we print 20 copies today, they will be numbered 1-20. Then tomorrow, if we print 50 copies, it will start from 21 and number on from there.

I have been scouring the internet for hours, reading many forums and help sheets for excel that all refer to inserting code using the VBA editor and macros. Coding has always been something I cannot get a grasp of and particularly at this complexity. I have come to realise that there isn’t going to be a way of doing this without using code – however, I am struggling to determine how exactly to use the codes I can find on the internet regarding this.

I accepted this task because the idea seemed so simple I thought it would be a breeze. Now it seems I have bitten off more than I can chew.

I need the sequential print numbers to be RightAlligned in the Footnote, starting with the number 2000. Is there any chance someone can take me through this coding process step-by-step in a very easy to understand way. I am computer literate, but not with coding.

Assistance would be greatly appreciated.

Operating System: Windows XP Professional
Microsoft Office 2007
 

A:Add Print Copy Number to Excel document

7 more replies
Answer Match 52.08%

Guys,
Can I do that? Adobe Acrobat Reader has no copy & paste function (or is there?). I am using MS Word 97 & Word 2000.

Gracias
Keet

------------------

 

A:Protect Word Document From Copy,Cut,Paste

6 more replies
Answer Match 52.08%

Hello, my printer is only printing 1 copy of a document, webpage, excel file, etc.

It doesn't matter what I print, when I select to print, I get the box to change the quantity, but no matter what I put in there, it always just prints one copy.

It will print all the pages of a document, but just 1 copy.

Any idea what I can do here?

A:Printer only prints 1 copy of document, even when I put 2 copies

Hi xmrkite. what brand/model printer is it?

If it is an HP laserJet type then this link may help:

Laserjet won't print multiple copies on Windows 7 - HP Support Forum

Otherwise post the details and we'll see what we can find.

3 more replies
Answer Match 52.08%

I just sent an e-mail to a doctor but it came back undelivered--apparently the address was out of date. Rather than type it all over again, I assume I can simply copy my e-mail text to a new Word document using the Edit feature. What are the steps to doing that?
Davide

A:How To Copy E-mail Text To A New Word Document

That should be quite straightforward. Open your email client and find the original email - there will probably be a copy in the "Sent" or similar named folder. Double click the email to open it in a full window.Press Ctrl+A (i.e. hold down the 'Ctrl' key and press the 'A' key at the same time.) Then press Ctrl+C You can close the email window and minimise the email client at this point.Open word with a new blank document and press Ctrl+V the text from your email should appear in the Word document, the font will be changed to the default Word font but otherwise the text will be the same.Hope that's what you were after.

5 more replies
Answer Match 52.08%

Not sure I am in the right forum, but here goes. I have a 24 page word document that was saved as a word document. I need to post this on a web site, but the format changes and I don't want retype the whole thing. I am told I need to save it in html format, but it does not work. Can anyone help. Thanks.
 

A:Copy word document to HTML format

Hi,

What version of MS Word

DO you have all the options installed. Save as HTM may be a selectable option during the installation of MS Word.

What happens when you use the "save as HTM" option Any messages on screen, any prompt for a location to save the file.

What error message(s) do you get.

I've just tried this with a Word XP document. The "save as htm" option allowed me to save a copy of the document as filename.html in the same folder by default. The file opened in IE and Opera quite normally.

hth

Ceri
 

3 more replies
Answer Match 51.66%

When saving a Word 2007 document as a webpage (htm, html), an extra folder is automatically created besides the hmtl document itself. This folder contains background information like pictures, wallpaper etc. Is there a way to prevent that folder from being created in the first place? I've got Word 2000 on another computer, and when I save my word documents as html files over there, that extra folder is not generated. The only time that folder is created in 2000 is if my documents contain pictures, wallpaper etc. In Word 2007, it is created all the time, even though my documents are just plain text.
 

A:Solved: Word 2007, saving document as html document: how to get rid of extra folder?

Managed to find the solution, it was very simple after all. One has to save the document as a filtered webpage and click "yes" when a box pops up warning you that you will use certain featuers which are specific to Office2007, such as the background. Then the document will save without that extra folder and files.
 

1 more replies
Answer Match 51.66%

I have a Canon MP250 printer. Does anyone know how to enlarge the fonts ? They print very small fonts & are difficult to read. Thanks
 

A:Solved: How to enlarge fonts when printing

The printer prints what is sent by the PC. Enlarge the fonts in the application that is opening the document.

Also, check the printer setup and/or the app sending the document to the printer and ensure "fit to page" is not set.
 

3 more replies
Answer Match 51.66%

Hi all.

The other day whilst in the throws of fixing another unrelated problem I came across a strange and annoying Word Document problem.

When I bought this word document up it present a very unusual icon. It was grayed out and part of the title contained a ~$ then the name of the document.

When I tried to open it, the word document only opened up to the gray page just before it should turn white displaying the text, and there it froze.

Nothing worked after that! The freeze was so bad that the only way to close the window was to turn the computer off at the tower.

After rebooting I tried it again 2 more times with the same problem freeze occurring in the Word document.

Today I again found another document that caused the same problem, this time the icon for that document was normal but right beside this icon was another malformed grayed out ~$(name) icon.

When I tried to open either of the 2 icons I got the same freezing up problem, just as before.

I tried a previously suggested step in that I opened "Word" and from there navigated to where the bad files were located.

In turn I only hi-lighted each, and at the bottom of that window clicked on the arrow for the drop down box.

I was advised that one of the presented options was to repair the file. No such option was present.

So there you have it. Any advice on this problem please?

Regards

A:[SOLVED] Word document freezes computer and document is corrupted

Hi all.

Just to advise that I am going to mark this topic as Solved......to a fashion so to speak.
I may resurrect it at a later stage if the problem re-presents it's self.

In a nut shell. I spent a lot of time today searching sites and performing tests including searches on my computer program.

I ascertained that all the aforementioned "defective " Word documents originated in the same folder. After performing several search functions with the criteria as ~$.doc no other such files were found on my computer, other that the already mentioned.

All tests suggested would not repair the said documents.

I have now deleted the offenders and I will monitor the situation. If I run into problems again I will re-post.

Thanks anyway.
Regards

2 more replies
Answer Match 51.24%

I frequently have hard copies of Word type documents that I need to edit to change the address for example and send on to other addresses.

Could someone please tell me how I can make a Word Document editable on a PC from a hard copy of a document?

HP told me it would be easy if I bought an HP Officejet 7612 all in one printer scanner with OCR software installed but now that I have got it there are no instructions for this issue.

Thanks for help
mygoose
 

More replies
Answer Match 51.24%

I use Windows XP with AOL 9.0SE. I have often used my scroll mouse with the Ctrl key on my keyboard to enlarge text of websites that have tiny text. All of a sudden it doesn't work! Anywhere. I can still scroll up and down but cannot enlarge or decrease text size with my scroll mouse. What could be wrong and what can I do about it?
 

A:Solved: Can't Enlarge Text With Scroll Mouse

8 more replies
Answer Match 51.24%

this is probably not where i should post this....but, family uploads photos on myspace.com; how can i retrieve and enlarge these jpegs without losing the quality? thanks all!!
 

A:Solved: how to enlarge jpegs posted on myspace.com

6 more replies
Answer Match 51.24%

I read on vmware's website about the virtual disk management program and how to expand the size of a virtual disk I have. I haven't been able to get the program to work.

I'd type "vmware-vdiskmanager -t 3 -x 7GB H:\vm\windows 98\windows 98.vmdk" and it will say "diskname or some other argument is missing"

How can I expand my windows 98 virtual disk?

The disk is already split up into:
Windows 98-000001.vmdk
Windows 98-000002.vmdk
Windows 98-flat.vmdk
Windows 98.vmdk
 

A:Solved: Enlarge a Virtual Disk? (VMWARE)

iXneonXi said:

I read on vmware's website about the virtual disk management program and how to expand the size of a virtual disk I have. I haven't been able to get the program to work.

I'd type "vmware-vdiskmanager -t 3 -x 7GB H:\vm\windows 98\windows 98.vmdk" and it will say "diskname or some other argument is missing"

How can I expand my windows 98 virtual disk?

The disk is already split up into:
Windows 98-000001.vmdk
Windows 98-000002.vmdk
Windows 98-flat.vmdk
Windows 98.vmdkClick to expand...

Hi neon,

I assume your virtual disks are preallocated. Is that correct? If so, did you first convert your preallocated disk to growable? If not here is an example:

At http://www.vmware.com/support/ws45/doc/disks_vdiskmanager_eg_ws.html
Converting a Virtual Disk

To convert a virtual disk from preallocated to growable, use a command like the following:

vmware-vdiskmanager -r sourceDisk.vmdk -t 0 targetDisk.vmdk

This converts the disk from its original preallocated type to a growable virtual disk consisting of a single virtual disk file. The virtual disk space is no longer preallocated, and the virtual disk manager reclaims some disk space in the virtual disk so it is only as large as the data contained within it.

Expand the Size of an Existing Virtual Disk

To expand the size of a virtual disk, use a command like the following:

vmware-vdiskmanager -x 40GB myDisk.vmdk

Hope this helps,

-- Tom
 

2 more replies
Answer Match 50.82%

I have Windows 2007 & Vista Business. Suddenly I have a saved text document that I can't do anything with. Can't print it, copy it or e-mail it or send it anywhere. All I can see when I right click are two "boxes" containing formatting options such as Paste, Font, Bullets etc.Hope you can help.

A:Have a document in Word 2007. Can't send, print or copy or e-mail it.

You can open it though right? Where did the text document originate from ? Where do you see those two boxes you mention when you right click (ie. in Word, etc)? Can you at least read the contents of the doc?

I'm also assuming that other documents work?

2 more replies
Answer Match 50.82%

Hello,
I need some help creating a macro with some complex (I think) functions. This one might be tough!

I have a document that has fill in fields. The document is protected in order to enable the fill in fields.
Users will enter information in the fields depending on the answers to the questions in the document. The document is attached to show what it looks like.

What I need is a button (called "copy") at the end of the document that the user can just click and the macro will only copy text formatted as header and any fill-in fields that were completed.

Then the user can use the copied data to paste it somewhere else either by using their mouse (right click + paste) or using the Ctrl + v.

I'm not even sure if that's possible but we'll see if someone can help. It would be extremely wonderful if someone could figure this one out.

THANK YOU!
 

A:Creating a Macro to copy specific data within a protected document

Hi Nena, welcome to the forum
I'm sure it will be possible to read all entries using a macro like the one below

Code:

Sub test2()
Dim fld As FormField
For Each fld In ActiveDocument.FormFields
Debug.Print fld.Name & " - " & ActiveDocument.FormFields(fld.Name).Result
Next
End Sub

I placed this macro in the documents VBA project,
I filled in "hello" in the Person: field and see here the result when I run the macro:
Code:

Dropdown4 - Select One
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Dropdown4 - Select One
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Dropdown4 - Select One
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Dropdown4 - Select One
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
- Yes....complete a-c
- Yes....complete a-c
Text1 - hello
- Yes....complete a-c
Text1 - hello
- Yes....complete a-c
Text1 - hello
Text1 - hello
Text1 - hello
Dropdown5 - No
Text1 - hello
Text1 - hello
Dropdown5 - No
Text1 - hello
Dropdown6 - Select One
Text1 - hello
Text1 - hello
Text1 - hello
Text1 - hello
Dropdown5 - No
Text1 - hello
Text1 - hello
Dropdown5 - No
Text1 - hello
Text1 - h... Read more

1 more replies
Answer Match 50.82%

I would like to be able to copy onto an Excel sheet the Most Visited file/document shortcuts.

I'm not referring to any internet shortcuts/bookmarks.

The list of Most Recent files visited can be seen at:
C:\Users\[Owner Name]\AppData\Roaming\Microsoft\Windows\Recent

But I'm just looking to copy the shortcuts for say the top 25 or 50 most visited files.

Does anyone know how to do this ?

More replies
Answer Match 50.82%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?
Chuck.
 

A:Solved: Printed name on paper

16 more replies
Answer Match 49.98%

I am so hoping someone knows the answer to this very perplexing problem... I thought it was my printer so I bought a new one and I have the same problem. I print a picture of my granddaughter, who has these wonderful chubby cheeks.........until it is printed and the chubby cheeks are gone. She has slimmed right down...... lol I have been struggling with this problem for quite a while now, have asked everyone who comes within two feet of me and no ones knows how to fix this or what is even causing it. I know someone here will know. I have never had a problem that this site has not been able to fix for me. : ) Thanks, in advance.

Oh yes, and new printer is an Epson 835 al-in-one and my old one is an HP photosmart 2575
 

A:Solved: quality of printed pictures...

16 more replies
Answer Match 49.98%

Hi

I suspect this might be a fairly common problem. Whenever I print there also seems to be a block of about 5 fine lines printed over the text for about ever new line of text. Now I recently bought a new (high capacity) cartridge which costs a fortune, so I'm not too keen to buy another if it is the printer (about 6 years old) which is the problem.

Has anyone else had the same sort of problem?
 

A:Solved: Lines through printed page

Try cleaning the print heads, this is the normal solution to this problem.
 

2 more replies
Answer Match 49.98%

Other than using View>Text Size, is there anything I can do that may cause the print to be darker? I know that my eyes are beginning to grow weaker but perhaps someone knows a trick for me to use or an answer. The light print seems to occur on most web pages and very bad on my ISP webmail account. My signature will tell you I am using WinXP Pro and SP2. If all pages were as clear and dark as the print I am seeing while typing this thread, I would not be asking for help. As always, TIA
 

A:Solved: Pages Appear To Be Too Lightly Printed

7 more replies
Answer Match 49.56%

I recently acquired a Canon EOS Rebel T1i (500D) 15.1 mp. Previously, I had a Canon PowerShot A80 (4.0 mp).

Here's my question. Whenever I try to print a photo from my Canon i860 printer, the picture is a lot brighter than the image on screen (overexposed). I need to darken the picture significantly before printing it, in order to get a ressemblant result on paper. When I was printing a photo from my PowerShot A80, the result was almost identical to the image on screen.

Does this have anything to do with my new camera's higher resolution? Would I need to lower the resolution in order to match the printer's capacity?

This is becoming annoying and I really would like to find a solution.

Thank you.
 

A:Solved: Printed photo very different from on screen image

16 more replies
Answer Match 49.56%

When I print anything off a web page I almost need a microscope to read the print. This is a sudden development - although I haven't installed anything new or made any changes recently.
I can increase the font size on the screen OK, but whatever I print is still the same tiny sized printout on paper.
Appreciate some help and advice as to how to make my printout readable
Thanks !

IE7
Win XP Professional SP2
Dell Dimension 5000 (Pentium 4)
Epson Laser EPL-5800 and Epson StylusPhoto 870
 

A:Solved: How to increase printed font size ?

Hello
try this

file print preview and adjust the last button ...

mine is shrink to fit

You can choose a different layout
 

3 more replies
Answer Match 49.14%

Hi, I have a user on a XP pc with Office 2007. He is having problems when he is printing a graph - some of the details on the Y axis are missing and also the graph header (see example2). Looks OK in print preview and also if he prints to a PDF file (see example1). Same result when he tries otehr printers from the same pc and old files containing graphs have the same problem. If he selects the graph and prints, then it prints OK but this is not really an option when he has multiple pages with multiple graphs.

The same documents on 2 other PCs prints OK.

Any ideas on what is causing this ?

-iem
 

A:Solved: printed graph missing some Y axis and header

I had that same problem. I uninstalled the Excel updates I had automatically installed on 12/15 and the problem went away.
 

2 more replies
Answer Match 48.72%

I have graphics that I would like to print, but the address, date & time are printed on the page. Is there a printer setting that would remove those?
Many thanks!
 

A:Solved: Remove address,date & time from printed page ??

10 more replies
Answer Match 46.2%

I have been trying to copy my document files using a cd and dvd with no success.
 

A:Copy document files to cd or dvd and display those files and retrieving a specific f

Perhaps try a good CD / DVD burning software package such as Nero.
 

2 more replies
Answer Match 44.94%

I just purchased a pre-owned Lenovo T420 laptop with Windows 7, but amazingly, over these many years, I've never had to back up my OS before because someone (my tech guy mostly) had always done it for me. Anyhow, while I do intend to make a full system backup copy, which I have no doubt will include the Windows 7 OS, I would also like to create a backup (disk) copy of my OS only since no install disks came with the computer. I can load the Windows 7 OS onto an 80Mb CD, but the entire hard disk backup will take many gigabytes and I intend to use a 32 Gb flash drive for that purpose.

My first and essential question is, can I create a Windows 7 Pro "restore" disk by just copying and pasting the entire "Windows" file on my hard drive to a CD or Flash drive...or is there more to it than that?

When I started to create a backup copy of the entire disk using the Windows backup program, I took particular notice to the
fact that (after I selected the custom selection option rather than the automatic selection for which files to copy) that the Windows file was no longer listed on the "C" drive menu provided in the backup program. It is certainly listed on my "C" drive when I bring it up directly, so can anyone explain to me quickly what that's all about?
 

A:Solved: Can I make a backup copy of my Windows 7 OS using copy/paste?

16 more replies
Answer Match 44.52%

My 89 yr old mother-in-law bought a desktop from an estate sale. Said she was told it had a 'pirated' copy of XP on it. Called me to find out what that was. She only wanted the computer to do e-mail and FaceBook with the grandkids and great-grandkids. Said she only paid $20 and wanted to know if I could "fix" it. Now, I do have a legal copy of XP that was on a computer that has long since bit the dust. The XP program was an upgrade from ME. I would like to help her and wonder if I could take my upgrade legal CD of XP and just put it in the machine and copy over the 'pirated' copy?
 

A:Solved: How to install legal copy of XP over pirated copy

8 more replies
Answer Match 42.42%

I've been sent a file, with the extension *.cdr. I don't have Corel on my computer. But I just installed Xnview (or something that the file extension website said I should download to view it), but the thing is, the graphic is soooooooo small it's unreadable. I also checked on my Infranview(spell?), but it's still a 96x96 graphic. I've just converted the graphic to a JPEG file, because this forum doesnt support *.cdr.

Can you help me enlarge the graphic and readable?
 

A:can you help me enlarge this?

The trouble is once you have reduced an image, it is very difficult to increase the size without distortion

I tried Irfanview, but at 400% increase, it is impossible to decipher

Try using the resize on the original cdr file Image | Resize
Use the Set Size as Percentage of Original
Try in increments of 20% Starting at 120%

Make sure that Preserve Aspect Ratio is checked
 

2 more replies
Answer Match 42.42%

Hi,

PooMan UK was very kind to make the below logo a while a go, it was for my mate but my mate would like it making bigger as he wants to use it as banners and on t-shirts and things like that.

Would it be possible for someone to enlarge this please, as big as possible i suppose??



Regards,
JDobbsy1987

A:Can you help enlarge this please

Jamie Pal I'm a bit confused ... why don't you just pm me ... since I created the original I would be only to happy to make it any size you want and in any format that would help you out ... but here's the font I used which may be helpful for your mate Base2 ttf the background and shading is pretty straight forward

3 more replies
Answer Match 42.42%

My wife shops for clothes on-line qiute a bit. At some sites when she clicks on the "enlarge image" square nothing happens. It;s Java-related I think. What do I need to do to get this function to work?
 

A:Can't enlarge

7 more replies
Answer Match 42.42%

I have two questions regarding documents created in Word 2007...

1) Can links be created within a Word document? For example, can I click on and item my table of contents and have the document jump to that particular section of the document?

2) Also, is there a way to make sections of the document hidden until the user clicks a specific word or graphic in the document?

I'd like to specify a particular instruction and include a "Show example" link that would make a detailed example appear for those who needed the extra help.

Thanks everyone!

A:Word 2007 - Links within a document? Hide/Show sections of a document?

If you created table of contents through References - Table of Contents, you can hold Ctrl and click on the item in that table, word will take you there. This feature is standard.

Also, to navigate inside document you can use bookmark option.
Insert bookmarks. Word 2010 Bookmarks
Then insert Hyperlink - in the window select second tab "Place in This Document" and choose your bookmark.

As for hiding parts of document, I do not think that is possible.
You can create that in HTML document with javascript, but not in Word document.

3 more replies
Answer Match 42.42%

I am running XP and Word 2000 and Nortons. Word will crash if you leave the document open for a while (there is no specific time frame) and then select close (icon). The error - Microsoft Word for Windows has encountered a problem and needs to close. The details are: AppName: winword.exe
appver 9.0.0.3822
Modname: kernel32.dll
modvers: 5.1.26002180
offset 0001eb33

This has pretty much happened since I got this laptop. I have reformatted and reinstalled everything (due to another problem) and still have the same problem with word. I have used the same CD on other computers to install word and they do not have the same problem.

I use a variety of templates and plain documents in my work and can not pin point it to one template.

If you leave Word open with a document (no matter what size) and come back to it later this is when the problem happens. I started to get around it my saving first then closing, but this no longer works. The save completes and then I select Close and this is when it happens - you get the dreaded pause and then you hear the whirl of the computer and then you get the Microsoft Word for Windows has encountered a problem and needs to close. Firstly I could put up with it but is now just a nusiance.
 

More replies
Answer Match 42%

Hey guys! Is there anybody knows a program that can convert (copy) words in an image to a real document that can be edited from Word?

Thanks
 

A:Which software can convert an image of a document to a real document (MS Word)?

If you have MS Office, as I think you do, you might try out this link:

http://weblogs.asp.net/jgalloway/ar...0_-You-may-already-have-it_2E002E002E00_.aspx
 

2 more replies
Answer Match 42%

This might be kind of tricky.

We're trying to streamline our RFQ-to-Quote process, which currently utilizes a combination of digital forms and hand-written forms passed among several departments. My boss asked me to modify the RFQ form to save him some typing (because he has to retype all the information in the final Quote), and I--not understanding the complexity of the process--very stupidly told him that it could be done fairly simply using form fields and bookmarks. He's been kind enough to grant me a lot of leniency because for him anything would be better than the current situation, so as long as I can improve on what we use now, he'll be happy.

I thought about creating form templates for each of the departments, then as the original RFQ circulated from one department to the next subsequent forms would be appended to it to create a rolling document. I'm not too happy with the that idea; there's all sorts of room for user error. I thought about creating a single document template containing every department's form, but a) I don't want any single department to be able to modify information gathered during another department's process, and b) certain departments must generate a variable number of copies of their form.

I told my boss the best way to accomplish a secure and low-maintenance RFQ-to-Quote would be to create a stand-alone Quote Generator application, but we both agree the effort is not condusive to the timeframe by whic... Read more

A:Word 2000: Creating a Master Document of document templates

6 more replies
Answer Match 42%

When I open a saved word document or New blank document, the document is filled with columns or checks fully filled in the document.
How can I avoid this? How to modify the settings. Thanks in advance.

More replies
Answer Match 42%

I have my slideshow screensaver set up fine. However, the photos are small and does not full up my 20inch screen. Is it possible to make the photos larger?

A:Enlarge Screensaver

You can take individual images and, using GIMP, Paint (resize), etc., increase each image size. If these are already low rez images, they will appear blurry.

3 more replies
Answer Match 42%

I like to use large icons and most programs have high res icons, but for those that don't is there a way to scale them? I don't care if they end up pixelated or blurry, I just want them all to be the same size. I don't want to make new icons or replace them, just scale old 48x48 icons to full size.

Thankz.

A:How do I enlarge low res icons?

Hi and welcome to SevenForums,
See if this helps ico files will open in gimp where you can add more files to it,
https://www.youtube.com/watch?v=fkuZqJCFaog
https://www.youtube.com/watch?v=KLHkN03Ocr8

5 more replies
Answer Match 42%

Very time I click on a photo to enlarge it on the web, it will not enlarge. Please help

A:Photo will not enlarge

Which type of browser are you using? Have you updated your Adobe Flash and Java?

3 more replies
Answer Match 42%

I installed ie9 bata and like it so far. One thing I do want to change is the URL/search bar to the width of the window instead of size of a tab. If I drag it to lengthen it, the space for tabs got sequeeze.

A:How do I enlarge the URL/search bar on ie9?

Hi, and welcome to SF.
To put it simply, there is no such option. both the address bar and the tab bar are in one toolbar.

4 more replies
Answer Match 42%

Hello,
This may sound a little simple but can someone tell me how to enlarge a picture to use as a homepage on Firefox? I have several pictures that I would like to use but they are so small. Is there a correct size for a homepage?
There is one more thing, can an object be taken off a background (usually a square box) and be made into a gif. image? I have several images in Tif format but don't like the little box background.
Thank you for all help.
 

A:How To Enlarge Picture

You need an imaging editing program. The best free program in my opinion is http://www.irfanview.com/. Just make sure you realize that enlarging small pictures will result in loss of quality unless the original picture was saved at a very high resolution.

Regards,
Rollin
 

1 more replies
Answer Match 42%

Hi Folks, I have 136GB unallocated space that i would like to add to one of my partitions, When i go to disc management it seems they only give the option to shrink a partition, I have partition wizard but it seems the option they give is to merge partition, The unallocated space is not next to the partition i would like to expand, Instructions would be appreciated, thanks.

A:How to enlarge partition

Patch
It can be done with Partition Wizard
BE CAREFUL, VERY CAREFUL
Disk Managmeent has limited potential so that the user cannot screw it up.
You can do damage with this if not done properrly
Free Partition Magic alternative. Free Partition Manager Software for Windows 7/VISTA/XP/2000 and Windows Server 2003/2008/2000.

You should move the partition first.

All that being said, I suggest that you backup everything first. Merging partitions can be risky, data can be lost. Merging non consecutive partitions is even more risky. I would hate to see you return with big problems because of what you are attempting. Members has had booting problems as well as other difficulties attempting what you are trying.

2 more replies
Answer Match 42%

OK. I give up. I need help to find a way to enlarge this animated gif. I like it very much but it is entirely too small. I tried three programs but none worked. I am a cat person and i think it is rather cute
 

A:How to enlarge this animated gif

10 more replies
Answer Match 42%

I use IE6 and Win98. When I send a picture as an attachment, using Outlook Express 6, the attachment works ok but also a very large picture is shown in the body area of the email (only a small part of the picture shows because it is so huge). Is there a way to eliminate the large picture and just send the attachment? I assume sending the large picture slows down the sending and receiving. Is there a setting adjustment to correct this? Will appreciate any help.
Oldwest
 

A:Pictures enlarge when sent by OE 6

14 more replies
Answer Match 42%

I cannot get my AOL to enlarge to fill out my monitor screen. I use Windows XP

John
 

A:Enlarge AOL to fit screen

Which AOL utility is causing the problem?

Does Windows utilities work properly?
 

1 more replies
Answer Match 42%

Not sure if this is the right place to post, How do I increase

the fonts to make (file, edit, view, bookmarks) larger? I

looked under view and I have no text button. I am using the

latest mozilla firefox
 

A:How to enlarge fonts

10 more replies
Answer Match 41.58%

Hi....
I'm using word 2010.
I have a Mailmerge document (actually a company letter with header and footer, used by a package called "Cash4Windows" [C4W]). This document usually has the recipients name and address etc. inserted by C4W.
The document is a template - "xxx.dotx".
What I want to do is strip out the Mailmerge fields and save the document as a normal Word 2010 document, 'cos the User wants to have a blank standard company document available.
I've spent a long time fiddling with the Header and Footer to get just what the User wanted, and I know i could just cut-n-paste the Header and Footer into a new document, then save it as "xxx.docx", but when I looked on various help sites the normal method in Word 2010 seems to be
on the ribbon tab
Select Mailings
Select "Start Mail Merge"
Select "Normal Word Document"
then save the Word document.
I've tried this and it has absolutely no effect, as when I close and reopen Word and select the previously saved document, I still get the "Opening the document will run the following SQL command" splash screen!
I've tried saving the "normalised" document with various different extensions, but nothing seems to get rid of the SQL.
I've also tried opening the VBA editor (Alt+F11) to see if I can find the SQL, thinking that if I can delete the SQL it might cause Word to avoid the prompt, but I can't even find the SQL!!!
I know I'... Read more

More replies
Answer Match 41.58%

Hi,

I work at a small non-profit and we have updated two computers with new computers running Windows 7. We use MS Word 2003. I have checked all threads on forum related to this issue, but nothing seems to correct our problem. I would be grateful for any help.

Description of issue: With a Word document open, one should be able to click "File" > "Send To" > Mail Recipient As Attachment", or any of the other mail options, and have the email composition window of Thunderbird pop up. What happens is that Word is attempting to send the attachment via Windows Live Mail. The computer basically freezes. If you try and abort or get out of Word, and error pops up stating you can't close Word until the email has been sent. Finally, you have to force a shut down of the computer.

Internet Explorer shows Thunderbird as default email client. I have check all of the other obvious places for setting the default email client, but I can't seem to find a conflict anywhere on the computer showing Windows Live Email as default client.

As a side note, this employee was using Outlook Express as their email client prior to the computer upgrade and all setting were imported into Windows Live Mail, which was initially used. The employee did not like Windows Live Mail, so I installed Thunderbird. It is used as the default email client and the only issue has been with Word. Additionally, I know that the document could be sent from Windows Explorer by right-cli... Read more

A:Can't send Word Document via Thunderbird from open document

Might try uninstalling Word, then reinstalling it.
 

1 more replies
Answer Match 41.58%

My screen minimized on its own. I wasn't playing a game or watching a video. It just started doing it yesterday. At first hitting F11 would help, but now not even that works. Almost half of my screen is taken up with the start menu, etc. Very frustrating. It's a Dell Dimension 2400 and Windows Xp
 

A:Screen minimized and won't enlarge

8 more replies
Answer Match 41.58%

I am using windows XP, while viewing a web page that indicates
"click here to enlarge picture, nothing happens , What am I doing wrong ? This happens on all pages... w8iwj....
 

A:Click to enlarge view in win XP

6 more replies
Answer Match 41.58%

Hi

in explorer i set thumbnails very big/large

is there a tweak to make them bigger?

thanks
cheers

A:can i enlarge the explorer thumbnails?

Hello Drugo,

Sorry, but the icons view will only go up to Extra Large Icons. However, you could turn on the Preview Pane, and adjust it's border and the window's border to change the size of supported images in the preview pane like below.



Hope this helps some,
Shawn

3 more replies
Answer Match 41.58%

My email icons are too small wihile the other icons are of noramal (medium) size.How can I enlarge them.

More replies
Answer Match 41.58%

Look at the picture! What I want is simple, 100 mb is too small for EFI and I just want to make it 1GB. See that unallocated space in colored grey box, I want to move that near the EFI System Partition so that I could merge it. But now the problem is I can't because of Microsoft Reserved Partition which now left me with only
1) Move MSR by Cloning then delete or
2) Move EFI system partition by Cloning then delete

Which one do you think should I take? or perhaps there is another way of doing it?

A:How do I enlarge EFI System Partition?

What make you think that 100MB is too small ? Basically this partition only contains BCD to boot Windows, only 34MB used.
However, it is easier to use Macrium Reflect Free to get it done

4 more replies
Answer Match 41.58%

Dell E520 windows XP home edition
I had to reinstall my windows XP. The screen measures about 8 1/2 x 7 . My screen is 17". I have tried dragging the corners, but it doesn't move. How can I enlarge it to fit my screen?
Thanks!
 

A:Enlarge screen view

To adjust, use the buttons on the front of the monitor.
 

1 more replies
Answer Match 41.58%

My C hardrive has just 924MB available and I cannot even defrag my computer. How can I (1) either change the partition so I can enlarge the C hardrive part by taking a larger share of the D hardrive part of the partition, or, (2) move some large programs from the C hardrive to the D hardrive part of the partition without losing any functionality or files?
 

A:Enlarge Hardrive Space

Perfect Solution! (Easeus Free)

http://www.easeus.com/disk-copy/download.htm
 

2 more replies
Answer Match 41.58%

I have received a PDF with a lot of detail in it, on one page.

I need to enlarge it and print it out on several pages.

Can someone please talk me through what to do.

Regards

Skeeg
 

A:How to enlarge PDF and print several pages

Using Irfanview with Ghostscript
You can open the pdf in Irfanview as an Image .. Crop it to what you want to print .. And print the cropped area any size you want.

Or maybe Zoom in .. and take Screenshots ... then print the screenshots

It might be easier to send it to me .. I have other software (photoshop)
 

2 more replies
Answer Match 41.58%

How to enlarge preview pane box? I can't read my documents because the preview pane box is too small. Thanks.

A:How to enlarge picture preview box

This is what I get

Try a jpg file and see what that shows.
I get a "No Preview available" message for a .doc document. OK for all images , .rtf iles and .pdf.

EDIT: Have just found this "The preview handlers of office 2003 are not compatible with Windows 7." And I use Office 2003 so that explains the message!

9 more replies
Answer Match 41.58%

Howdy,

I have XP Home, IE-7,SP-3. After downloading SP3 when it first became available, I thought that there was a feature that allowed you to enlarge the page that you were viewing. In other words you could make the page take up all the room on your monitor temporarily making your tool bars disappear. It has been so long since I have used the feature I have forgotten how to do it.

I thought that all I had to do was press f-11 to enlarge and press f-12 to bring it back to normal.

I Googled IE-7 SP3 but I could not find any mention of it. Maybe I am dreaming but I thought for sure it could be done.
Any advice ?
Thanks for your time,

Dennis

A:How To Enlarge Page size

You can try going to the View>Fullscreen menu option or perhaps using the Alt+Enter key combo. I thought it was F11 too.

7 more replies
Answer Match 41.58%

I have three images of the same photo. 595x842 gif 595x842 jpg and
22kb zip.
I tried dowloading each one in turn on to a website for selling second hand goods. Unfortunately, on the advert the picture appears tiny. On the advert it can be clicked to show full size. What can I do before re-downloading the picture to make the picture show slightly bigger? All the other ads have bigger pictures.

A:enlarge photo for advertising

What web site is it? What are the uploading instructions on the site as far as the size of a picture that is allowed? What are the size of the photos that are larger? Edit your photos to be the same size of the other pictures.

14 more replies
Answer Match 41.58%

I really like some of these apps but the font is too darn small. I already have my dpi at 150%, so I don't want to increase that anymore. Thanks.

A:Is there anyway to enlarge font in Apps?

I could be wrong, but I don't think so.
I've tried.
Nothing on Google.

6 more replies
Answer Match 41.58%

Hello!
I would like to know, if it's possible to customize the picture preview box.
Here is what I mean - I want to enlarge only the picture box, not the whole bottom toolbar. Perhaps there is another folder view that allows you to do that?
I have a lot of folders full of pictures, and it is really difficult to navigate, if I cannot see the preview of those pictures.
What I want to acomplish: Have the listview on, but also have a larger picture preview box, maintaining the rest of the toolbar the same size.

A:How to enlarge picture preview box?

Hello Atomix, welcome to the Seven Forums. You could use the preview pane:

Kari

6 more replies
Answer Match 41.58%

My hard drive is divided into a primary partition and an extended partition sub-divided into two partitions. Windows 7 is installed in the first, primary partition (C: drive). Most of the software I run is installed in the first partition of the extended drive (D: drive). At the moment there is nothing installed in the second partition of the extended drive. As I do upgrades to Windows 7 I am running out of space in the C: drive where it is installed. Can I use a tool like Parted Magic to move the extended drive to the empty partition thus creating empty space between it and the C: (primary drive), and then enlarge my C: drive to use the space I've created? Or will I cream my installation?

A:Can I enlarge my Windows 7 partition?

Rather than all these words could you please post a picture of your disk management.

2 more replies
Answer Match 41.58%

Hi Tech People:

My problem is this: I have Canon Arc Soft photo software which came with my scanner. I'm sort of stuck with it until I can afford to buy a nice photo program. Anyway, I think this is an WinXP problem rather than a photo software problem. I run a five yr old Sony Vaio with 80 Gbs. I have put in lots of memory, over 1.25 GB. I have WIN XP Pro. I have never had a problem with my photo software before and have blown up pictures to 8' by 10"s with no problem. Yesterday I was trying to make a 3" by 5" into a 5" by 7" and I was repeatedly told that there wasn't enough memory. I wasn't running anything else. I have cleaned up my startup menu but I haven't gotten around to the proceses that are running in the background all the time. If anyone has a good place for me to go to learn which ones I can disable I'd appreciate it. I don't know if that could be causing this problem or not. I don't know much about virtual memory except I know how to get there and I can change the size if you think that would help. Any assistance is greatly appreciated.
Thanks,
Dawn
 

A:Trying to enlarge photos - says not enough memory

16 more replies