Tech Problem Aggregator

ISA Server Firewall Error

Q: ISA Server Firewall Error

hello Dears, i have configured ISA server with Service Pack3 as Firewall.
i have allowed users to access yahoo.com for their email but when they type in their password and email address and press login the following error appreas on the clients browser.
Network Access Message: The page cannot be displayed

Technical Information (for Support personnel)
• Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202)
• IP Address: 192.168.0.45
• Date: 9/11/2008 6:30:16 AM
• Server: server-2025d623.dacaar.org
• Source: proxy

A: ISA Server Firewall Error

Make sure both HTTP and HTTPS are allowed beyond that if you could post the ruleset.

1 more replies
Answer Match 50.82%

Hi I'm working on a client/server with the Java programming language and trying to figure out how to protect my server. With my current Virus/Firewall protection suite theres nothing I can do to keep out unwanted Java applications on the port I choose to allow the Java SE Binary through for clients accessing the server application. ESET Smart Security 4 is what I am using. Does anybody know of a security suite that would allow only a specific Java application to get through the firewall? I'm not to sure on this subject because my firewall is identifying any Java application as only the "Java SE Binary" and not I'm sure if you can even really name your Java application like you would something you would write in C++. Any information would be appreciated, thank you.
 

A:Java Server/Client + Server Firewall Safety

6 more replies
Answer Match 48.3%

My company wants to install a Proxy Server and A firewall and A IIS Server? I don't think we need that much protection. I think a Proxy and IIS is enough. Any Ideas on this subject.
 

A:Do I really need a Proxy server, firewall and an IIS server?

IIS is not for security. IIS is Internet Info Server. This is used as a web\ftp server. Proxy and a firewall would be good for security.
 

1 more replies
Answer Match 46.62%

Hey BC community,Note: I have never had a problem like this before, it has just started this week.I play maplestory, and this program detected something wrong with my firewall. So I proceeded to my security settings and attempted to edit my firewall settings: turn it on/off and then this error code popped up:So I tried to edit the other settings and the same error code came up each time.After that came up SEVERAL TIMES, I went to a microsoft and other forums to search for help. They told me to go to this window:And said to go to: Windows firewall and do something with it...but it's not there to do anything to? I really have NO IDEA what to do! It isn't effecting me that much, but when i start my Maplestory file up to reinstall it, it closes and it says this:[04/08 01:54:15] Install Start[04/08 01:54:16] User Temp Directory : C:\Users\Devin\AppData\Local\Temp[04/08 01:54:16] Use CRC : false[04/08 01:54:16] File Name : C:\Users\Devin\Desktop\MSSetupv108.exe[04/08 01:54:16] Game Code : 33563155[04/08 01:54:16] Cannot Regitster Firewall(C:\ProgramData\NexonUS\NGM\NGM.exe,Nexon Game Manager)[04/08 01:54:16] ErrCode : 14000 - 404 - 0[04/08 01:54:17] Install Path : C:\Nexon\MapleStoryI have downloaded microsoft anti virus things and they "cleaned up" my computer, but it still hasn't changed anything. Help?Sincerely,Devin

A:Windows 7 Firewall error code: 0x80070424 as well as Firewall Service being Removed

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) DownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results here

15 more replies
Answer Match 45.78%

A friend gave me his laptop PC to remove some virus' and any Malware.  Well I think I have all the bad stuff off but I noticed that the firewall wasn't running.  I looked in services to start it but it's not there.  I down loaded Microsoft security essentials but that didn't help.  Have you any ideas?  Is there something I can run to find it? Thanks,klclarkEdit: Moved topic from Firewall Software and Hardware to the more appropriate forum, at the suggestion of staff. ~ Animal

A:firewall error 0x80070424 firewall not in the services window

Hello klclark and Welcome -
 
Download Security Check by Screen317 from HERE
* Save it to your Desktop.
* Double-click SecurityCheck.exe
* Follow the onscreen instructions inside of the black box.
* A Notepad document should open automatically called checkup.txt; please post the contents of that document.Note: If a security program requests permission to access the Internet, allow it to do so.
 
Next -
Error 0x80070424 ocurs when you use Windows Update follow the M/soft fixit for your version of Windows -
 
Thank You -

1 more replies
Answer Match 45.36%

Hi,

I'm trying to build a ftp-server which delivers tv-programs from my computer in Finland to the computer I have in Spain. My purpose is to use remote connection to Finland to record programs, and then download them by using ftp-client program.

Correct me if I'm wrong, but computer in Finland needs:

tv-card
Ftp-server
static ip

Computer in Spain needs:
ftp-client

I think the question is, how do I configure my zyxell adsl modem (with NAT and Firewall based on port checking) in ftp-server and my the clients zone-alarm so that not every hacker can get to the ftp-server? Clients modem is bridged.

I obviously can't configure my Spain ip-number to the modem, because it's not static. Can I some other way identify to the modem "who is calling". Modem must also let windows remote control through? I need to also open some port-numbers for ftp-connection...

I think what I need to do is to open port 21(for command) and 20(for data) connection to the modem in Finland? To the clients zone-alarm firewall I need to open port > 1024 from Finlands ip-address? And then I put some password for the ftp-server? right?

If somebody would have some information concerning about this, I would appreciate it

Thanks for advance

Juha
 

A:FTP-server and firewall

10 more replies
Answer Match 44.94%

I have used this link Diagnose and fix Windows Firewall service problems automatically and downloaded the fixer. This told me that the problem may be occurring because of a group policy or Norton security firewall program. I do not know how to change either of these. Any sort of help would be much appreciated.

A:Error Code 5. Firewall. Firewall does not start.

Do you have norton security installed?

If so it uses its own firewall, in which case you do not need windows firewall on. You should not run more then one firewall at a time.

1 more replies
Answer Match 44.52%

Hey Guyz what would you suggest me to do with P II 200~ 256 ram 11 gig hard win 2k pc can i make it a firewall for my workstation or it would be better to set up an apache server ? p.s im gunna run appache anyway on this old box or on workstation, and if i make it a firewall would it add much security to my D-Link 624 router with firewall and Tiny personal firewall 6.5 pro on my workstation.
 

A:FIREWALL OR SERVER ON P II 200~ 256 ram 11 gig hard win 2k.

No point in adding another dedicated firewall. Replacing Windows with Linux or BSD will give you a nice webserver that can take on moderate amounts of traffic provided you don't do much active content.
 

4 more replies
Answer Match 44.52%

Simple question: I need suggestions for a secure, server quality, and free linux firewall. Thanks. Oh and command line only, but I'm sure I don't need to say that part .
 

A:Linux Server Firewall

Open/NET/FreeBSD.

IPTABLES.
 

3 more replies
Answer Match 44.52%

Ok forgive if an easy question and perhaps I am thinking of this at a different angle at the moment but if you connected to the internet through a high anonymity proxy server wouldn't that elminate hackers. NOW let me qualify that eliminate hackers provided you didn't activate a backdoor virus on your machine. (Actually please post this as well What if you did activate a backdoor, how could the hacker even find you then if you are going through a proxy, they would once again only see the proxy address and have to get through this and then find you first NO?)So really wouldn't the only thing necessary be updated antivirus and spyware detector if you were connecting through an anonymous proxy server.

My reasoning would be the sites and a hacker or spyware would only see the proxy's ip address so in order to get to you they would have to get through the proxy server first and then find your ip on that network. I guess the main concern would be you might not know the proxy's policy but that could be tested at many websites correct?

Also how could spyware see you if you are hiding behind a proxy? I would think they couldn't if the proxy had good security.
Any thoughts would be appreciated.

Thanks.
 

A:Proxy server a firewall?

7 more replies
Answer Match 44.52%

I have a website on a server with Windows Server 2008 and been having firewall issues. On the client and server computers Privatefirewall v7 is installed. When the firewall is enabled on the server the website and VPN stops working although FTP, POP3 and SMTP servers work.

On the server the IP 192.168.0.2 has been added to the trusted sites and the 192.168.0.0 has been added to the trusted network. Windows firewall has been disabled on both computers.

Server
------
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1

Client
-----
IP Address: 192.168.0.2
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
any help would be appreciated
 

More replies
Answer Match 44.52%

I've set up an FTP server on a computer that has a static IP. We have a hardware firewall that uses a script to allow access through it. I'm kind of stumped on this one though. I cannot seem to access the FTP server from the WAN side EXCEPT when I drop the firewall. Access from the LAN side isn't a problem. These are the FTP scripts that I have tried. I'm a little fuzzy on the "active" and "passive" FTP concept and that's probably my problem. Can anyone show me the error of my ways?
Thanks!
Peter
#ftp from LAN to WAN will be accepted
remote ipfilter insert input accept -p tcp -sp 21 -dp 1024:65535 internet
remote ipfilter insert output accept -p tcp -dp 21 -sp 1024:65535 internet
remote ipfilter insert input accept -p tcp -sp 20 -dp 1024:65535 internet
remote ipfilter insert output accept -p tcp -dp 20 -sp 1024:65535 internet
# FTP
remote ipfilter append input accept -p tcp -sp 20:21 internet
remote ipfilter append output accept -p tcp -dp 20:21 internet
 

A:Firewall script to allow FTP server

What is your hardware firewall?

Does it know what "internet" is?
 

2 more replies
Answer Match 44.52%

Can ANYONE please help me...

I am trying to get mIRC workthing through ISA Server, which is on our server and is our primary proxy firewall. Anyhow, from what I have read It is possible, but I cant get any help on it from anywhere... I am the administrator so I can control what kind of access and ports to open on the Firewall... But i need someone to help me do it. Can someone PLEASE help, I have been trying to get it going on our network for sometime, and you guys are my only hope... Please reply with a answer As Soon as you can...

THANK YOU...
HELP MEEEE!!!
 

A:mIRC through ISA Server Firewall!!!

6 more replies
Answer Match 44.52%

Hi all!

I apologize if I post this to the wrong forum. I'm new here.

I have tried to illustrate my WLAN/LAN/Internet situation:

I am looking for ways to access
(1) my (own) web server (with IIS 6/Apache) (HTTP)
(2) my IP/Network cam (RTSP)

from my smartphone (3) from "Internet". I am a .NET-system developer but my networking skills are very poor.
My problem is that there are obstacles, i e an evil firewall (4). Since my web server (1) and IP/Network (2) cam are behind it (4), I have absolutely no idea how to access them from my smart phone (3) from Internet.
My ISP doesn't allow port forwarding, but I know that there is a Socks5 server which I can reach @port 1080. I believe that I can use it somehow?

My question:
Is it possible to reach my web server at all from outside the firewall? How? Are there any other solutions for me except for changing my ISP?

With best regards,
Hans
 

A:How to access a web server behind a firewall?

7 more replies
Answer Match 44.1%

Hi Guys, we're moving into our new office this week (formally a bedroom buisness. It's time to expand and take on some people) I want to nework all the computers, and have a firewall on the cable broadband to protect all the computers from attack.

Can anyone help by telling me what I need.

I was planning to use a 500mhz machine as the firewall with antivirus software installed as well. All the guides I've found on google suggest using Linux. Do I have to use linux for a firewall ? I was hoping to use windows 2000 lite on all of the network - I've never used Linux ! ( also I've only got 5 low spec machines so I need to downgrade the OS. All the computers on the nework only need to access the internet to do the work.

Also I'd like to connect a printer on the 500mhz machines ( the one thatI use for the firewall) so that anyone on the internal network can print a document. It would just make things easy to have the printer connected to that particular computer.

Can someone answer a few questions please as I'll be intalling and configuring all this tomorrow.

Q. any recomendations as to what firewall software I should use.
Q. what antivirus software should I use.
Q. Would you use win 2000 lite as the OS for the firewall
Q. Can I have my printer connected to the Firewall computer which would then be on the network.

Thanks for any advice.
Vince
 

A:How to build a firewall and print server in one

7 more replies
Answer Match 44.1%

Anyone have a clue about setting up an FTP server inside a firewall? I have a cable modem (RCA), then a broadband wireless router (linksys), then three PC?s with WinXP branching from there, one cabled two wireless.

Now if I understand the process correctly, the outside world can see only the IP address of the linksys router. The PC?s get an ever changing address each time they are booted. Is that right?

How do I go about making a single directory on one of the wireless PC?s viewable to anyone? I don?t really care about security on this machine cause it?s only purpose in life is to record TV programs with an NVIDIA Personal Cinema. There is nothing interesting on the hard drive beyond my husbands StarTrek and Battlestar Galactica reruns??

I?ll do a ghost image of the drive before I open it to the world in case of malicious damage from the outside.

Any advice on how to go about this? I just need a location to upload HUGE digital home videos for family access and I?m not about to pay an ISP for FTP space when I have plenty of hard drive space at home.

Thanks!

Amanda

A:Home FTP server set-up inside firewall

Actually, the only thing the outside world sees is your modem. Your router is ly available to your LAN unless you're running VPN.
Most of the time, the IP your individual computer has will not change from boot to boot, and will be something like 192.168.x.x

In order to accomplish what you want to do, you'll need to enable port forwarding on port 21 for your specific computer's IP address. Refer to the documentation of your router on how to do this, as it is different from router to router.

3 more replies
Answer Match 44.1%

I am using a HP6620 pc with Win7 SP1. I am running a video streaming program called PS3 Media Server streaming video from my pc to a Samsung Smart tv on a home wireless network using a Actiontec Model GT784WN modem/router.

This combination has worked good for several months. I recently started having some minor problems with the pc not shutting down correctly. I ran the internal check disk. It ran all five checks ok and did not indicate it found anything wrong but since then the shut down is ok. The first time I tried to run the streaming video after the disk check it failed to make a connection with my tv. After messing with it for a couple of days I shut the Windows firewall off. The streaming began to work immediately. I checked the firewall and the PS3 Media Server was listed as a program that was allowed. I turned the firewall on and off several times and listed and delisted the software but it still does the same thing. I'm thinking my running the disk check must have done something but I don't know enough to check what. Help will be appreciated. I am not super efficient at pc's so be kind. Thanks
I found the problem. I had upgraded to the pro version of Avast Antivirus by mistake. The pro version has a firewall which activated. Can't run two firewalls at the same time without problems happening. I went back to the free version and everything is ok.

I must say I am really suprised that almost 120 people have read this entry and no one has offered any suggestions goo... Read more

A:Win 7 Firewall Will Not Permit PS3 Media Server Thru

Hello & welcome to the forum GeneralGeorge,

Sorry you didn't get a reply, but glad you got it sorted.

Good luck!

1 more replies
Answer Match 44.1%

have a cod2 server that will show up in the local servers but will not let me see the server info and will not let me connect to the server on another computer, tried my laptop too and still cant cannect,running vista on both machines to play game but running xp for the server, everybody eles can connect but me and im sitting right near the server, any suggestions
 

A:cod2 server firewall problem

Turn off Windows Firewall, it's a common culprit, same thing happens when I play with friends running Linux LAN server, I can't see them until I turn off my firewall.
 

1 more replies
Answer Match 44.1%

Hi all im having problems playing games online star wars battlefront2 on gameranger it keeps saying firewall or router blocking. Brother plays fine on same network he is connected via wifi we have adsl2+ modem to a wireless router { i am connected to router via ethernet cable}both pc's win8.1 firewall and antivirus disabled.
 

More replies
Answer Match 44.1%

I have a home network and have recently upgraded it with a wired print server (PS). In order to get the PS to work I had to disable XP's built in firewall. I was wondering if there is a way to give permissions to the PS so that it can TX/RX through the XP firewall.

My router has a NAT firewall and I'm using Zone Alarm to stealth any open ports and block certain requestes, so I'm not sure that the XP firewall is needed, but it does give me piece of mind while it is running.

The PS has a static IP address (192.168.1.201) within the local network. I have also discovered that it uses port 34443. With this information can I set up an exception for the XP firewall to let the PS communicate?

OS: Windows XP Home
PS: Linksys PSUS4

Thanks,
Kevin
 

A:XP firewall and print server problem

To the best of my knowledge the XP firewall causes more problems than it's worth. It sounds like you're pretty well covered with ZA and your router, I suggest disabling.
 

1 more replies
Answer Match 44.1%

It's a simple configuration, but hard to find. We know because we looked! To enable the use PCAnyWhere with any server using the IIS firewall you need to drill down as follows:

Advanced Management
Computer Management
Services and Applications
Routing and Remote Access
IP Routing
NAT/Basic Firewall

After selecting NAT/Basic Firewall on the left you should see several items on the right including 'Network Internet Connection'. Click on it once and inspect its properties. On the window that displays select the
'Services and Ports' tab and then click on the [Add] button.

Continue to add each of the following items to create two (2) new entries on the list:
1. Description=PCAnyWhereTCP, select protocol =TCP, Incoming port=5631, Private address=(the external address for your server) and Outgoing port=5631. Then click [OK]

2. Description=PCAnyWhereUDP, select protocol =UDP, Incoming port=5632, Private address=(the external address for your server) and Outgoing port=5632. Then click [OK]

If you have PCAnyWhere properly installed and configured for external users you should be ready to go!
 

A:Using PC AnyWhere with Windows Server 2003 IIS Firewall

Well, yes that is port forwarding. You could also forward port 3389 to the servers address and that will give you remote connection from your WAN addy
 

1 more replies
Answer Match 44.1%

can someone help me, i am trying to get mIRC running through ISA Firewall, i swear i have tried everything, can someone PLEASE help me!
Im pretty sure i have opened up the Right Ports...!
 

More replies
Answer Match 44.1%

The firewall in my machine is off according to Webmin, but I can't ping my server and I can't access my machine's Apache HTTP server or Webmin from the LAN. I know these functions are running because I have an OpenVPN client running on this machine, and I can access these services via the VPN.

What do I need to do on this server to be able to remotely access its services ?

Thank you in advance.

-- NewtownGal
 

More replies
Answer Match 44.1%

Hi,

Does anyone have any recommendation on a good software firewall program for Windows 2003?

I want to set up some allowed IP ranges and block the rest. Not sure how to do this with Windows 2003 built-in firewall. Any tips will be greatly appreciated!

Thanks in advance!

Terry

More replies
Answer Match 43.68%

Hi,
I have been asked by a small educational institution to implement web filtering for about 10 student computers. Their goal is for the students to have access to specific web sites that are on a school whitelist but not show any pics, videos, java content, etc. Basically just plain text. After googling around it seems that MS ISA server is an option (expensive but user friendly) or Squid (free but not so user friendly). I need it to have some basic features like a log of who accesses it and when, timed access, etc.
Any suggestions out there of what I can use to accomplish this? Are Squid and ISA the only choices? I also saw something called "Firestarter" http://firestarter.sourceforge.net/. Has anyone had experience with this?

Your help is appreciated.
 

More replies
Answer Match 43.68%

i am having a LAN connection by proxy server from office. my problem is i can chat in yahoo messenger with connection preferences as proxy settings but cannot view webcam images of other person. error says firewall is blocking it. i am using windows XP and i went into control panel, network settings, advanced properties & unchecked the firewall still it is persisting . can anybody help me out?

A:Using Webcam In Proxy Server? Firewall Blocking!

It may be the network firewall blocking it at the server. Many companies do not allow streaming media because it consumes all of the bandwidth.

1 more replies
Answer Match 43.68%

Anyone know any good software firewall for Windows 2003 Enterprise domain server? I have looked at Symantec's Enterprise Firewall but it's only for the standard version of windows 2003 and not the enterprise version.

ljCharlie
 

A:Firewall for Windows 2003 Domain server

7 more replies
Answer Match 43.68%

Hi,

Can anyone please help with this issue?

I have server 2003 on which I'm running an FTP application (automatically scheduled to publish the output of a timetabling application to an external website).

Problem is, the FTP application will not work with the firewall turned on. I've done the following:
Enabled all the standard FTP ports in the firewall.
Tried both active and passive mode FTP.
Tried Windows command-line FTP, which works fine.
Tried installing and using WS_FTP, which works fine.
Tried the FTP application on 2 different Server 2003 boxes and several XP machines, and it performs without a problem even with the firewalls enabled.

With the firewall off on this box, it works like a charm. With it turned on, the application simply quits after a few seconds without doing any transfer of files. No error messages are produced.

However, in the event viewer, I get a ".NET Runtime 2.0 error" with the following output:
EventType clr20r3, P1 ftpupload.exe, P2 1.0.2805.21438, P3 46dfea7d, P4 ftpupload, P5 1.0.2805.21438, P6 46dfea7d, P7 9c, P8 4c, P9 ftpupload.ftpexception, P10 NIL.

I've been careful to ensure that the same .NET runtimes are running on all the machines that I've used for testing this application.

If anyone could shed any light on this, I'd be eternally grateful!
 

More replies
Answer Match 43.68%

When the server's windows firewall is turned on, it does not let us open a program and access a file that is on the server. But, when the firewall is turned off - there are no issues. Is there a way around this without having to keep the firewall turned off?

It's an Windows SBS server
 

A:How do you stop a firewall from blocking your access to a server?

With a desktop Windows system you'd have to enable file sharing and specify what folders/files can be shared. There are also ways to configure the firewall (Control Panel - Windows Firewall) to open ports or allow specified programs access. I suspect Windows server is somewhat similar.

(Remember to reply with "bump" to your other thread to bring it back to the top when you get no action for about 24 hours.)
 

1 more replies
Answer Match 43.68%

im having trouble connecting to winmx now i hav connected to my university network...please help
 

A:winmx not connecting with proxy server/firewall

Hiya and welcome

I'm afraid to say, that you may have to speak to the System Administration at the University, as most don't allow file sharing, as that is a big way to spread viruses.

If they do allow you to confiure WinMX to get out, can you find out the firewall/router, etc?

Regards

eddie
 

1 more replies
Answer Match 43.68%

Hello!

I'm puzzled. If I turn off windows firewall I can hit the FTP server from the WAN fine and even from the LAN. Turn the firewall back on and that port is blocked! When I installed IIS for the FTP server I added (ticked the boxes) for FTP Server in the firewall.

The $64,000 question is this; why is the firewall being a pest?

Thanks!

More replies
Answer Match 43.68%

Hey all,

This may be a VERY simple question but i can't seem to find out the cause of it. I have a laptop that needs to connect via VPN to a server running an application 'Filemaker Pro 8.5". I connected the VPN to the lan and everything worked fine i was able to access the IP 192.168.100.110 with no problems. Then windows firewall popped up and asked if it should block it. I told it to unblock.

At this point I closed the program thinking everything was gravy. Now when I go to reconnect to that program over VPN it hangs. And now I cannot ping the server 192.168.100.110.

I have tried a crapload of things to try and fix this, but no luck so far. I even did winsock reset.

Now I can connect to the other servers fine...I can even run Filemaker 5.5 on a different server. However this laptop is ONLY for Filemaker 8.5 so I have to be able to connect, that is all it will do.

What do you think the problem is? Why could I connect then now no longer?

PS. I have disabled all Firewalls on the pc and AV.
 

More replies
Answer Match 43.68%

I just checked my Firewall logs for my server and I'm surprised to see that people are accessing a open port on my server (it's passworded with a .htaccess file).

Here's the logs:

server said:

#Version: 1.5
#Software: Microsoft Windows Firewall
#Time Format: Local
#Fields: date time action protocol src-ip dst-ip src-port dst-port size tcpflags tcpsyn tcpack tcpwin icmptype icmpcode info path

2008-11-10 16:10:26 OPEN UDP 192.168.1.100 219.77.44.183 45813 20657 - - - - - - - - -
2008-11-10 16:10:26 OPEN UDP 192.168.1.100 173.17.17.229 45813 38590 - - - - - - - - -
2008-11-10 16:10:27 OPEN UDP 192.168.1.100 218.16.46.195 45813 24841 - - - - - - - - -
2008-11-10 16:10:27 OPEN UDP 192.168.1.100 62.57.70.127 45813 53838 - - - - - - - - -Click to expand...

That's a bit of the log, almost every entry is attempting to access 45813, which is a port for uTorrent web, which I use for transfering files from my home to my school (they've denied email and everything so this is my last resort). These aren't my schools IP's, because the schools IP never changes.

I'm just wondering if I should be worried about these "attacks." They're happening very often, almost 1 kb every 10 seconds. While that's small, it's occurring pretty often.

Also, my router logs say that I have a "SYN Flood Attack Detect." I'm not sure if that makes a difference.

Thanks for your support.
 

A:Server 2003 Firewall logs insane?

15 more replies
Answer Match 43.68%

I cant get my Outlook to work consistently. 
I keep getting this message. 

Unable to send or receive messages for the Outlook (simone.natalie) account.

Server Error: 3219
Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx'
Windows Live Mail Error ID: 0x8DE00005

I have uninstalled it and reinstalled it but no luck

More replies
Answer Match 43.26%

I recently changed a company from a satellite to broadband connection

i got everything working before connecting the firewall
Everything was setup for the exchange server (sbs2003) to work away.

so:

mail (send and receive) and internet were working on the new connection
(without the winroute firewall in place)

and obviously mail and internet was working through the winroute firewall
when it was connected to the satellite connection.

i then added the firewall...

So i made the changes on the dsl router and on my ext address of my firewall
and internet is working on my network,but mail was not sending or receiving
from my exchange box.

I received a rule from kerio support...which is now closed...and it didnt work
i ran the wizard to set all firewall rules to allow all...

i am now able to send mail...still cant receive...

is there something that should be setup on port forwarding from my dsl modem to my firewall? i have ports 25...80...3389... setup, but this is for outlook web access...which is
working...

Any ideas anybody...been at this for 4 hours...running out of ideas...

thanks for reading all that...
 

A:Winroute firewall blocking mail to exchange server

6 more replies
Answer Match 43.26%

Hello,

I've been using windows and I can't seem to get my server working, how would I set CenturyLink? Online Security Firewall to allow this software to use my computer?

:EDIT:

In CenturyLink? Online Security,in the Firewall settings there is Rules and Services I have the rules set but I'm not sure if adding a service is how you add things or not.

Because Ps3 Media Server is basically just PlayON but is free, this program is used to find video or Media files and download them, but for some reason CenturyLink? Online Security will not allow the ps3 to see the files because the firewall isn't allowing it.

A:Firewall help for PS3 Media Server and CenturyLink™ Online Security

My best advice on this is to post at the CenturyLink™ Online Security site or ask their tech support.

1 more replies
Answer Match 43.26%

Hi,
I have set up an ftp server behind 2 routers & a firewall (& it works).

However 2 external users (on different days) could not make thier initial logon (personal) to my ftp server with my firewall running. They could logon with my firewall disabled, & when I enabled it again they were disconnected. 1 day after they made their initial logon they can each logon to my ftp server with my firewall running, without me making any changes at all.
I do not understand this, if my firewall is blocking them, why should it let them in the next day. The server has full access & so I did not expect the firewall to block them in the first place. The routers are configured correctly as the server does work without any problems other than the intial logon that I have mentioned. Both of the users are with the same ISP, & a different 1 to me
My external IP address is static, the external users IP addresses change all the time.

(1 other user logged on, a friend who helped me test it, as we were still getting it up & running I do not know if the same thing happened with him, he can also logon with no problems)

My OS Win2K
Users OS Win2K & XP
FTP server Faststream Netfile Server (free version) 6.7.5.1091- Manual PASV mode
FTP client Leech
My Firewall Zone Alarm (Free version)
ZoneAlarm version:6.5.722.000
TrueVector version:6.5.722.000
Driver version:6.5.722.000
My ISP BT
Users ISP NTL
My routers Linksys BEFSR41 - BT Voyager 205 ADSL modem/router

Any help to unde... Read more

A:cannot make intial logon to ftp server with firewall running

Howdy ssscrudddy...

Have you checked the Event Viewer for any errors for that day ?

It sound to me like ZA lost it's settings somehow ( maybe due to an auto update ), and when you disabled and re-enabled it, ZA then reloaded the settings, just a guess...
 

1 more replies
Answer Match 43.26%

Split from here: http://www.bleepingcomputer.com/forums/t/436093/windows-7-firewall-error-code-0x80070424-windows-firewall-service-missing/ ~ OB
 
Can u help me please 
 
Farbar Service Scanner Version: 03-03-2013
Ran by Anda (administrator) on 05-04-2013 at 20:51:47
Running from "C:\Users\Anda\Desktop"
Windows 7 Professional Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Attempt to access Yahoo IP returned error. Yahoo IP is offline
Yahoo.com is accessible.
 
 
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
 
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is OK.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
 
bfe Service is not running. Checking service configuration:
The start type of bfe service is OK.
The ImagePath of bfe service is OK.
The ServiceDll of bfe service is OK.
 
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
 
System Restore Disabled Policy: 
========================
 
 
Action Center:
============
wscsvc Service is no... Read more

A:Split from: WIndows 7 Firewall Error Code 0x80070424 Windows Firewall Service Missing

Please download TDSSKiller from here and save it to your DesktopDoubleclick on TDSSKiller.exe to run the application, then click on Change parameters
Check Loaded Modules and Detect TDLFS file system. Do not check Verify file digital signatures (even though it is checked in the example)If you are asked to reboot because an "Extended Monitoring Driver is required" please click Reboot now
Click Start Scan and allow the scan process to runIf threats are detected select Skip for all of them unless I instruct you otherwiseClick Continue
Click Reboot computerPlease post the contents of TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)in your replyDue to forum upgrade you may face issues posting the TDSSkiller log.Just last few lines of log is sufficient===================================================RKILLPlease download Rkill by Grinler from one of the 4 links below (if one of them does not work try another.) and save it to your desktop:Link 1Link 2In order for Rkill to run properly you must disable your anti-malware software. Please refer to this page if you are not sure how.Double-click on Rkill. (If you are using Windows Vista, please right-click on it and select Run As Administrator)Note: You may have to run Rkill a few times before it is successful. You may also have to download Rkill from a different link which will save it as a different file name.A black screen will appear and then disappear. Please do not worry, that is normal... Read more

1 more replies
Answer Match 42.84%

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped ... Read more

A:Linked Server from SQL Server 2008 to Access 2000 db gives error

7 more replies
Answer Match 42.84%

Every 5 minutes I get this error message popping up under event viewer on a Windows 2003 Small Business Server (all updates etc):

Event ID: 1054

Windows cannot obtain the domain controller name for your computer network. (An unexpected network error occurred. ). Group Policy processing aborted.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.​
I have done the MS Support site "recommendations", but the Server is pointing to itself for the DNS and the IP address and all that are fine. Not sure why or what is going on here. I can't seem to stop it.
 

A:Server 2003: (Event Viewer) error every 5 minutes RE: DNS Server

10 more replies
Answer Match 42.84%

Hello everyone,A friend asked me if I could restore it's performance of it's laptop and make it go 'faster' again.So I did the usual Disk Clean and Defragmentation also I noticed the AVG was acting weird.Every time I started AVG Free, I would get a 'Server is busy' dialog with 2 available options, Switch to or Retry, which basically do nothing.After reinstalling AVG few times, uninstall, avgremover, search and delete, ccleaner, install and still getting the error.I tried Housecall, but that couldn't find any threats, so used Spybot S&D, got a few tracing cookies and MalwareBytes with some stuff, can't remember what.Also i've updated my drivers with Driver Genius Pro.Anyway I found this site after a bit of Googling, and ran a DDS scan, which worked like a charm, but the first attempt of GMER gave a BSOD, second time it worked, however it was slow as hell and freezed from time to time, after 18 hours it stuck on a freeze that it couldn't get out from.I'm kinda curious what is eating this computer and promised my friend I would help 'fix' his computer, so please help, thank you.Greetings Rob//EDITAlso i'm unable to Enable the Windows Firewall for some reason and Windows XP language is Dutch------------------------------------------------------------------------------------------------------------------------------------------------DDS (Ver_10-03-17.01) - NTFSx86 Run by rob at 14:33:37,84 on vr 11-06-2010Internet Explor... Read more

A:AVG server is busy dialog and unable to activate Windows Firewall

Managed to run GMER in safe mode, here is it's log:GMER 1.0.15.15281 - http://www.gmer.netRootkit scan 2010-06-12 10:12:41Windows 5.1.2600 Service Pack 3Running: gmer.exe; Driver: C:\DOCUME~1\rob\LOCALS~1\Temp\fwryqpog.sys---- Devices - GMER 1.0.15 ----AttachedDevice \Driver\Kbdclass \Device\KeyboardClass0 SynTP.sys (Synaptics Touchpad Driver/Synaptics, Inc.)AttachedDevice \Driver\Kbdclass \Device\KeyboardClass1 SynTP.sys (Synaptics Touchpad Driver/Synaptics, Inc.)---- Registry - GMER 1.0.15 ----Reg HKLM\SOFTWARE\Classes\DShowPreview.VideoPreview\CLSI@ {457A23DF-6F2A-4684-91D0-317FB768D87C}---- EOF - GMER 1.0.15 ----

15 more replies
Answer Match 42.84%

Recently had a virus infection and noticed that the windows firewall service is missing. When trying to reset to recommended settings by using control panel received error code 0x80070424. Cannot access other computers or shared files/folders on home network. Saw a previous post dated 12-17 that appears to be the same problem.

A:WIndows 7 Firewall Error Code 0x80070424 Windows Firewall Service Missing

Welcome aboard Had the infection been cleaned since?Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

21 more replies
Answer Match 42.42%

I've run into an issue several times when trying to copy an entire share from one server to another. In this case, it happens to be from a Mac to a Windows server (just in case that's relative to the problem). The command I was using is:

robocopy \\MacDASD\Boards \\SRVRWIN78\Boards /S /FFT /XJ /R:1 /W:5 /V /TS /TEE /L

This runs fine, showing all the files and subfolders from the Mac's 'Boards' share that would have been copied. However, once the '/L' is removed to actually run the command I get 'ERROR 2 (0x00000002) Accessing Source Directory \\MacDASD\Boards. Running Robocopy for each of the subfolders under the 'Boards' share, however, works fine. It seems it just can't do the entire share at once. Any help would be appreciated.

A:Robocopying an entire share from server to server gets error 2

A quick search indicates error 2 could be:
- Some Extra files or directories were detected. Examine the output log.
- The system cannot find the file specified.

You could try to increase the retry parameter from /R:1 to a higher value.

I also found this but I don't know if it's correct or not, nor if error, exit codes and errorlevel are equal values:
Note also that bit 0x02 simply indicates that there are files at the destination that are not present at the source. This will happen if the /E switch is used and files have been deleted from the source since a previous copy was taken. It should not happen if the /MIR switch is used because that should delete files at the destination to mirror the source (but I haven't tested this).
Getting ROBOCOPY to return a "proper" exit code? - Super User

2 more replies
Answer Match 42.42%

this is my sisters hp laptop she got malware which made the internet explorer not access any networks but i deleted the maleware wid maleware bytes but still cannot connect to server its using a wireless connection to a bt home hub the connection is fine cos she can connect to ares lite (the p2p program) but not to any websites ive tryed winsock fix lpfix and iefix but all did not work ne help will be much appreciated thankx

A:internet explorer 6 cannot find server server or dns error

am i doing something wrong?

3 more replies
Answer Match 42.42%

I have a couple Windows 2000 servers hosting some web services and mail list servers and email server software. They are directly connected to a Cisco 800 series router with simple NAT but I have had terrible luck keeping them really secure. I have used CA Antivirus for a couple years and Zone Alarm but now Zone Alarm has stopped working well with the 2000 server (it crashes all the time and the True Vector service will not run properly) and I am wondering what the best idea for a decent software firewall and antivirus might be to protect these servers. I dont have a ton of $ for these things either. The servers have seperate external IP addresses as well.
Thanks,
J5
 

A:antivirus and firewall for Windows 2000 Server OS hosting websites/email

anyone....anyone....
 

2 more replies
Answer Match 41.58%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

More replies
Answer Match 40.74%

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

15 more replies
Answer Match 40.74%

So my laptop has a bunch of problems. It started out as a virus infection then I found out more problems.

First of all, thank you to Broni for directing me to the thread that tells me to run DSS.

I can't run a systems restore. I get the 0x800700B7 error. As well, Systems Restore says that I've never had a Systems Restore done before, which I think is odd, because I recall seeing Systems Restores created last time I checked (maybe a year ago?)

I also can't turn on Windows Firewall. I get the "Windows can't start the Mpssvc" message.

Here's my AVIRA log:

Avira Free Antivirus
Report file date: December-17-12 18:09
The program is running as an unrestricted full version.
Online services are available.

Licensee : Avira Free Antivirus
Serial number : 0000149996-ADJIE-0000001
Platform : Windows ™ Vista Home Premium
Windows version : (Service Pack 2) [6.0.6002]
Boot mode : Normally booted
Username : me
Computer name : ME

Version information:
BUILD.DAT : 13.0.0.2890 Bytes 05/12/2012 17:18:00
AVSCAN.EXE : 13.6.0.402 639264 Bytes 11/12/2012 14:42:33
AVSCANRC.DLL : 13.4.0.360 54560 Bytes 11/12/2012 14:42:33
LUKE.DLL : 13.6.0.400 67360 Bytes 11/12/2012 14:43:12
AVSCPLR.DLL : 13.6.0.402 93984 Bytes 10/12/2012 14:41:39
AVREG.DLL : 13.6.0.406 248096 Bytes 10/12/2012 14:41:32
avlode.dll : 13.6.1.402 428832 Bytes 10/12/2012 14:41:41
avlode.rdf ... Read more

A:System Restore Error, Windows Firewall Error and a bunch of viruses

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download ComboFix from any of the links below, and save it to your desktop. For information regarding this download, please visit this web page: http://www.bleepingcomputer.com/combofix/how-to-use-combofixLink 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopIMPORTANT....1. Close any open browsers.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.3. Do not install any other programs until this if fixed.How to : Disable Anti-virus and Firewall...http://www.bleepingcomputer.com/forums/topic114351.htmlDouble click on ComboFix.exe & follow the prompts. When finished, it will produce a report for you. Please post the C:\ComboFix.txt Note:Do not mouse click ComboFix's window while it's running. That may cause it to stallNote: If you have difficulty properly disabling your protective programs, refer to this link --> http://www.bleepingcomputer.com/forums/topic114351.htmlNote: If after running ComboFix you get this error message "Illegal operation attempted on a registry key that has been marked for deletion." when attempting to run a program all you need to do is restart the computer to reset the registry.===Please download Farbar Service Scanner and run it on... Read more

65 more replies
Answer Match 40.74%

So when i try to get Windows Firewall to run on recommended settings i get error 0x8007042c.
So far i have tried-
all four methods on the microsoft help page here:
?0x8007042c? error message when you try to start Windows Firewall
when i tried manually starting it i got error 1068 the dependency service or group failed to start

Ive also tried
Sharrow's "Most helpful Reply" on this page-
Windows could not start Error 1068: The dependency or group failed - Microsoft Community
although i dont have aland line so idk if what i did affected it well or not... person who wrote the thing had a wlan so idk if what i did was wrong.. anyone wanna let me know?

it didnt help either.

so i ran sfc /scannow on elevated command prompt and got it to my desktop (learned how to do that today )
here is what i got on it.... can anyone help me figure out what the issue is and how to solve it?
im only gonna post the stuff it cant repair, i dont think yall need the other stuff.

a third of the way through-
2014-01-06 10:56:16, Info CSI 000000e8 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 10:56:16, Info CSI 000000ea [SR] Cannot repair member fil... Read more

A:Windows Firewall error 0x8007042c + error 1068 (manually starting)

Welcome to the WSF, Junyahh!

Please use the following diagnostic tool. It has a powerful detection mechanism, and may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Download: Farbar Recovery Scan Tool Download
Select the version that applies to your system.
Save it to your Desktop.
Double-click the downloaded file to run it.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply.

The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply.


Also, use the Farbar Service Scanner
Download: Downloading Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.

Thank you.

1 more replies
Answer Match 40.32%

I am using Windows 8.1 with MBSA 2.3 . 
I run the scan and get the following error: 








Windows Firewall tests cannot be done due to an error. (0x00000001)








What can be done to resolve this issue ?
Thanks
M

More replies
Answer Match 39.9%

While browsing the Internet, I came across a website while searching
for
something. A message came up from IE warning me this could be a
phising
site. I quickly left the site. I cleared cookies and ran Ad-Aware. PC
seemed
fine. Recently, I could not get onto the Internet with either IE or
Firefox.
I ran WinsockXPFix and was able to get onto the Internet. This error
message
comes up right away when the PC gets to the desktop: Generic Host
Process for
Win32 Services has encountered a problem and needs to close. For
Windows
Firewall, the message is could not start the Windows Firewall/Internet
Connection Sharing service on Local Computer. Error 5: Access is
denied. I
ran Ad-Aware again and used Trend Micro's Online program. They both
just
found cookies. I have followed the steps from these websites:
http://windowsxp.mvps.org/sharedaccess.htm ,
http://support.microsoft.com/kb/892199/en-us

I still am having issues. Any suggestions will be greatly appreciated.

From the first website, this is what I did:
Download sharedaccess.reg (only for systems running Windows XP Service Pack 2) and save to Desktop. Then double-click the file to merge the contents to the registry. The Services entry will be created. Restart Windows (mandatory step, otherwise the following NETSH command will display an error message).

After restarting Windows, run this from Command Prompt (cmd.exe)

NETSH FIREWALL RESET

Launch firewall applet from Control Panel, and then configure your Windows Firewall s... Read more

A:Solved: Process error and Windows Firewall Error

16 more replies
Answer Match 39.9%

Hey guys, having trouble getting XP to Update, well it did Update MSRT and failed on Flash as usual because I removed Flash.  The only thing I can think of that I changed was my Router settings to more aggressive, but it has not affected Windows 7?
 
This is the ms document on it: https://support.microsoft.com/en-us/kb/883820
 
I tried all the stuff they say there but none works.  I have SP3.
 
I am also being sent to this site, which don't look like it should.
http://windowsupdate.microsoft.com/
 
Thanks pcpunk

A:HTTP Error 500 - Internal Server Error, Error 0x8ddd0010

All good now!

1 more replies
Answer Match 38.64%

Hi,
I installed message analyzer tool (64 bit) on my windows server 2008 r2 machine.
When I run it and select Firewall capture scenario , I am getting all the time the same error message "Unable to start session for Firewall provider.The specified service does not exist as installed service"
It's happen on all my win 2008 servers.
I tried to perform workaroung that is located in the troubleshooting document from download link (delete trace sessions) but no sessions were found.
Can you please tell me what I am doing wrong and how to resolve this issue ?

Thanks and regards,
Vadim

More replies
Answer Match 38.64%

I recently got infected by a very well made virus. Reinstalled the OS (Windows 10 Pro Insider) and the virus is still there, even though I click on Format the drive when reinstalling the OS. (does it make any difference if I format the hard drive from an external source like sata-to-usb? I mean will the virus go away?)
Anyway I've run several scanners including Hitman, Eset, Vipre, Adware Cleaner, Adware Removal Tool, Malwarebytes Antimalware, Malwarebytes Anti-Rootkit, Norton Anti-Rootkit, Emsisoft Emergency Kit, Junkware Removal Tool and Windows Defender(meaning nothing). But they don't detect anything.
The virus redirects me all the time to sites like Aliexpress, Alibaba, Adcash, casino88 and so on, this is so complex that the site is always changing. The worst part is that, it was affecting my BlackBerry phone, doing the same thing, when I'm connected to the same network.
I was so upset that I reseted both my cellphone and computer, also internet modem/router back to its original defaults, even modem had to be reconfigured.
That didn't work. I can try to eliminate this virus if I'm able to, but I'm needing serious help here, I also don't think that a local repair shop can take care of this. I can try to recreate MBR file is the virus is there with external tools and programs or even make a custom configuration on my ISP modem, I'm open to all suggestions here, and it would be highly appreciated.

A:Really Difficult Virus, DDE Server Error When Login Off/Memory Error/Ad-Redirect

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/579669 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

13 more replies
Answer Match 38.64%

Hello all,

I am using Outlook Express 6, and all was fine until today when I go to check my mail and a window popped up asking for my password (normally doesn't). Anyway, I typed it in and pressed "ok" and the box came up again... typed password again... box came up again... so I clicked "cancel" and got this error message:

"There was a problem logging onto your mail server. Your Password was rejected. Account: 'mail.in.com.au', Server: 'mail.in.com.au', Protocol: POP3, Server Response: '-ERR incorrect password', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92"

All the websites I've checked about this say to go into
accounts --> properties and make sure everything is typed out correctly and to make sure "Secure password authentication" isn't checked, which it wasn't and everything was typed fine since I hadn't been fooling around in there... I tried checking my mail again and still get the password box and it still won't accept my password.

Any ideas?
Thanks in advance.
 

A:OE won't accept my password (Server Error: 0x800CCC90, Error Number: 0x800CCC92)

That is also a standard error message you get when your mail server (ISP problem) is not operating correctly. There is little you can do if that is the case, just wait for the ISP to correct the problem at their end.

Contact them in any regards, and see if they are aware of the problem.
http://www.in.com.au/techelp/config/olookex5.htm is the link to your ISPs support for configuring OE correctly. You can also check to see if they make your POP mails accessible through their site.
 

3 more replies
Answer Match 38.64%

There is no "Help" or any other tab that shows how to seek help and post a new message about the problem; but all I can see are my last messages/problems, which have been solved by Cybertech, and now I have a new problem but don't know how/where to post it.

Moreover, since my last problem was solved, I clicked on the " Mark Solved" tab, but my thread/post did not show that my problem was solved, so that other readers may see it and avail of the help given to me.

And, like this message that I am sending now. There is a box headed "Title".
So whose name should I put there? My name? I should have thought that all messages went to moderators.

At the bottoms of this message box, there is another box 'Tags" and 'Trackback'. I dont know what these are! Where do I look up info about these?
 

A:OE won't accept my password (Server Error: 0x800CCC90, Error Number: 0x800CCC92)

9 more replies
Answer Match 38.64%

Hello again. I continue to have problems requiring some assistance. I am running windows 7 Home, SP1, and I use windows live mail email client to service my email accounts with bellsouth.net (att.yahoo.com).
Over the past year I have been having spells when My ability to send or receive email would result in an error message 0x800CCC90 stating my password is incorrect. I know it is correct because I use it to access my web mail when Live Mail quits. These spells of broken email willl generally correct themselves on their on; however this most receent episode has lasted about two weeks and it's geting a little annoying now. My attempts to consult ATT by chat for assistance always ends in their throwing up their hands in defeat and a closing statement that the problem is my email client and not ATT and ATt support does not include Windows live mail. My mose recent chat sesssion ended with the silent treatment from the chator leaving the chatee hanging.

I know the problem is a server problem because my attempt to change my email password resulted in a statement: "There are currently no available options for you to obtain a temporary password for your account. For help retrieving or resetting your password, please contact us."

I appreciate your patience with my rather verbose complaint. Any assistance will be greatly appeciated.

xgdude

A:email error windows live mail/server error 0x800CCC90

  
Quote: Originally Posted by xgdude


Hello again. I continue to have problems requiring some assistance. I am running windows 7 Home, SP1, and I use windows live mail email client to service my email accounts with bellsouth.net (att.yahoo.com).
Over the past year I have been having spells when My ability to send or receive email would result in an error message 0x800CCC90 stating my password is incorrect. I know it is correct because I use it to access my web mail when Live Mail quits. These spells of broken email willl generally correct themselves on their on; however this most receent episode has lasted about two weeks and it's geting a little annoying now. My attempts to consult ATT by chat for assistance always ends in their throwing up their hands in defeat and a closing statement that the problem is my email client and not ATT and ATt support does not include Windows live mail. My mose recent chat sesssion ended with the silent treatment from the chator leaving the chatee hanging.

I know the problem is a server problem because my attempt to change my email password resulted in a statement: "There are currently no available options for you to obtain a temporary password for your account. For help retrieving or resetting your password, please contact us."

I appreciate your patience with my rather verbose complaint. Any assistance will be greatly appeciated.

xgdude


Try using Micorsoft's new "Outlook.com"... Read more

9 more replies
Answer Match 38.64%

Hey guys, I keep getting this error message:

DDE Server Window: iexplore.exe – Application Error
The instruction at “0x0165cd11” referenced memory at “0x0165cd11.” The memory could not be “read”. Click on OK to terminate the program

so I keep clicking "OK", but I don't know what it is I'm okaying and I'm too computer illiterate to figure it out on my own. Any takers?
 

More replies
Answer Match 38.64%

hi. brand new to this forum, sorry-please bear with me.

i just had an email "virus" go thru my entire address book-it appeared as if it was sent from my gmail account.
now i get the error code for hotmail (am assuming it is because of the overload sent...?).

any suggestions on how to get my hotmail fixed and running again?

THANKS A LOT!

More replies
Answer Match 38.64%

recently (about 2 weeks back) i have been receiving 1 of 2 error messages either dcom server process launcher terminated unexpectadly or plug and play terminated unexpectadly, when these messages occur (usually every2-2 1/2 hours) im given a 1 minute countdown at the end of this countdown my computer restarts. while this doesn't seem to be harming my computer it is amazingly annoying, also if i go on yahoo search and look for a item i click on a link and im redirected to an advertising site: this occurs every 3 out of 4 clicks of said link. i have tried every antivirus software i own norton antivirus, malicous removal tool, windows defender, and malwarebytes nothing has worked every scans shows no infection. im not the only one having this problem several sites and forums i have visited has people with the same or similar problem which has happened to them in roughly the same time frame. if anyone can help i would greatly appreciate it because so far my only option would be to reformat my computer and reinstall every thing and i would really like to avoid that. please help me bleeping computer your my only hope.

A:dcom server error, plug & play error, redirects & restarts

oh almost forgot my computer is a dell pc that runs on windows vissta my apologies for not including this info earlier

1 more replies
Answer Match 38.22%

I recently installed a software called Navex, but when I click on it I keep getting this message on my windows 7
Error #....:1426
Message.....:OLE error code0x800706ba: The RPC server is unavailable
Line #....:0
Method.....:DATAEXPIRE
Object......:WINREPAIR TRIAD1

Please can someone assist Assist??

Please Assist

More replies
Answer Match 38.22%

When using Mozilla Firefox recently I encountered the problem of getting the following response from two separate secure https login servers:
1) Gibson Research Corporation, Internet Security testing (for Shields Up!) at:
https://grc.com/x/ne.dll?bh0bkyd2, and
2) my ISP WebMail server at:
https://webmail.atl.earthlink.net

Error Code 500.
Message: Internal Server Error.

I soon discovered that when installing the software supplied by my ISP, they caution the following when using a non-IE browser during the installation process, and instruct you to setup the connection settings for localhost:8080 with regard to their dial-up accelerator, otherwise the accelerator may not work properly.

This conflicts directly with the solution to the above Error Code 500 problem:

The solution is as follows with Mozilla Firefox:
Pull down: Tools->Options->General->Connection->Connection Settings
Choose: Direct connection to the Internet

-- Tom
 

More replies
Answer Match 38.22%

Hello:
XP/Outlook Express 6:

I've been getting the following error message even though I typed a correct Password along with correct user's name:
------------------------------------------------------------
'There was aproblem loggin on to your mail server. Your Password was rejected. Account: 'mail......net', Protocol: POP3, Server Resdponse: 'ERR' invalid user's name/Password', Port 110, Secure9SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92
-----------------------------------------------------------

Any help would be greatly appreciated.

Thanks,
 

A:Server Error" 0x800CCC90, Error #: 0x800CCC92

10 more replies
Answer Match 38.22%

Hey!

My father's computer, after running ADWCleaner yesterday, started behaving finicky.
At first, Explorer.exe didn't work right. It kept saying "failed to initialize".
Following some online guides, I issued regsvr32.exe over every file in the C: drive.
This fixed that problem. But other problems started showing up, the first one being the
"Server Execution Failed" by Windows Media Player.
WinAMP also gave a DirectSound error. The "Save As.." operation gives a "Class not registered" error.

I believe the registry may be corrupt.
Thus far, I have tried many things to fix the issues, such as -
Running FixIT, which also gave errors
CHKDSK, which found no errors
Reinstalling drivers and DirectX
Trying from the Administrator account
Virus Scans
CCleaner Registy Fix (I know, I know)
etc
Unluckily, someone had disabled system restore, so there are no backup points.

Also, this computer has important files and programs on it, so a wipe would be bothersome.

What can I do to fix it?

Thanks in advance.

A:WMP Server Execution Error, WinAMP DirectSound Error, others.

Although sound is affected, this is not a problem for this forum section. It is an OS issue, apparently caused by the Ad Aware Cleaner.

3 more replies
Answer Match 37.8%

browser mozilla firefox, windows xp operating system.
When browsing I get a jump message in tab and a page is not what I searched for. IE has stopped working it won't load at all and often I get an error message and page not found message even using mozilla. When I go to firewall settings it won't allow me to access I get a message the associated service is not running and do I want to start firewall with internet sharing service, whn I click in this it says windows cannot start the ics. So the whole experience for me at the moment is frustrating.. I value your expertise and advice, suggestions or recommendations, I am only a beginner... Thankyou in advance
 

More replies
Answer Match 37.38%

My Windows firewall keeps turning off for some reason...its always off now and wenevr i try to turn on using control panel in firewall it says "some settings controlled by Group Policy" and i cant select anything and its set to off....and be4 it started happening yah i had a virus...just a Trojan.Dropper i didn't get it bad i fixed it in 1 day...i don think it would have anything to do with this but i unn....plz plz plz help me turn on my firewall

A:Firewall Error

Hi moomooI do not recommend using windows firewall as your firewall.If you want to change i recommend using Sygate Personal firewall 5.6orZone AlarmTo activate Windows Firewall Go throughstart menu tocontrol panel to security centreand at the bottom of the window click Windows firewall underneath 'Manage security setting for:'A new window will pop up and click 'On'

7 more replies
Answer Match 37.38%

i think i did something stupid ..

i'm current using 'AVG Professional Internet Security Suite v7.5' and playing alot of wow..
then some friends told me about this addon updater which i tryed, but it didn't work, and after alot of investigation, i found that other players with the same problem.. they found that the windows command: 'netsh winsock reset', works.. so i used it.. and it worked.. but now my avg firewall wouldn't start.. after rebooting, repairing/reinstalling avg nothing helped..
 

A:avg firewall error

bump
 

1 more replies
Answer Match 37.38%

So... I started using Avg ver 9.0 and it works fine until later the firewall stops and going into error status. I done the configuration wizard and fixed it but then it happen again and i can't fix it was window configuration. Also.. I already use a Avg Remover and install Avg again. Got any solutions?
Thanks
-Yamato
 

A:Avg 9.0 Firewall Error

Hm...? No... Tech guy available to help me?
 

1 more replies
Answer Match 37.38%

hi all. when i go to opne windows firewall it keeps saying Due to an unidentified problem, Windows cannot display Windows Firewall settings. can anyone help me fix this thx
 

A:firewall error plz help

Hello and welcome to TechSpot.

This could be a malware-related problem.

Please go and read this and then post a fresh HijackThis log as an attachment into this thread. That way we should be able to see whether or not the problem is caused by malware.

Regards
 

1 more replies
Answer Match 37.38%

I get the following error message when trying to send using Windows Mail. I have been running WM for about a year and previously had this issue, but replaced Norton with Avast and since it has been fine. But as of today, I'm duped. I've deleted the mail account and set up again but nothign doing. Can anyone help?

An unknown error has occurred. Subject 'test', Account: 'mail.relisheurope.com', Server: 'mail.relisheurope.com', Protocol: SMTP, Server Response: '550 IP address 92.2.218.96 in XBL', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC69

Thanks

Mark

A:Server Error: 550, Error Number: 0x800CCC69

Hi, markh, and welcome to the forums.

The error code you're receiving indicates that you are connecting to the server, but the server is unable to find your mailbox. See Understanding SMTP error codes - April 30th, 2003 and SMTP reply codes - and that indicates that there may be some server -related issues. have you called them up to find out about your account?

2 more replies
Answer Match 37.38%

i am not good at english, hope i can make myself clear.hello, everyone. this is all my fault. i download a movie call "Brave" via torrent from internet. after download i can't open the video file, the readme file tell me that i need to install a decoder software in the same folder. i use the microsoft security essential to scan this "decoder", all good. so i install it after scaning.then, bad thing happened. the microsoft security essential realtime protection shut down. windows fire wall shut down. windows update shut down. the most important, all of those three could not be restart and i can't find each of them in the services.msci search on google for a solution. it take a long time. finally, i found something on the google. the solution is use "sc" command to recreate the service on services.msc. then i download a reg file called "wscsvc.reg" from that site, and import it to the system.http://pressf1.pcworld.co.nz/showthread.php?116524-Win7-Security-Centre-service-missing-after-malware-infectionWindows Registry Editor Version 5.00[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\wscsvc]"DisplayName"="@%SystemRoot%\\System32\\wscsvc.dll,-200""ErrorControl"=dword:00000001"ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\ 74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\ 00,76,... Read more

A:missing server Windows security center, windows firewall and windows update in services.msc

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) Do not change the default options on scan resultsDownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results hereDownloadESET online scannerInstall itClick on START,it should download the virus definitionsWhen scan gets completed,click on LIST of found threatsExport the list to desktop,copy the contents of the text file in your reply

23 more replies
Answer Match 37.38%

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

3 more replies
Answer Match 36.96%

Hi, I need help with a problem I have with the firewall in Windows XP SP3.CPU: AMD 2600 +, RAM: 1.5 GB HDD: 80 BG (2 partitions).The windows takes much time to load and when finally succeeds, doesn't load the service Windows Firewall / Internet Connection Sharing (ICS), so I have no firewall or internet.The event viewer gives me the following information: The Windows Firewall / Internet Connection Sharing (ICS) service terminated with the error: The system can not find the file.Try to start it manually but I get the same error.I tried the command rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132% windir% \ inf \ netrass.inf but the installation fails.I reinstalled the service pack 3 for windows XP.I tried to uninstall the service but it says there is no such service.I can not solve this problem ...I come to your help because I refuse to reformat the computer (I do not want to go for the easy solution)********************************************************************************************************************************************************************************************************************************************************************Buenas, necesito ayuda por un problema que tengo con el firewall de windows xp sp3.CPU: AMD 2600+, RAM: 1.5 GB, HDD: 80 BG (2 particiones).El windows dura mucho en cargar y cuando al fin lo logra, no carga el servicio Firewall de Windows/Conexi?n compartida a Internet (ICS); por lo que no tiene ni firewal... Read more

A:Error Windows Firewall/ICS

Do you recall anything that you were doing prior to receiving this error?

7 more replies
Answer Match 36.96%

My firewall (NIS 2003) has been generating error messages lately, the

“xxx has caused an error in yyy. xxx will now close”

kind of messages.
I just get them once in a while, and the program seems to be working fine in spite of these errors.

But, do the messages mean that the program has somehow gone bad and it’s not protecting me the way it should any more?

I’ve ran several virus, trojan and port scans and they all came clear. I’d hate to have a false sense of security, though. Would it be better to just remove it and reinstall it?

What’s your advice? …..

Thanks!
 

A:Error messages from firewall

10 more replies
Answer Match 36.96%

I've installed a VNC client by Jaadu both on my win 7 64 system & my iPhone.

Everything went smoothly until I applied the FreeSSHd encryption program.

When I try to connect with the computer the iphone gets this error:

Connection Error:

connection refused. You may have a firewall blocking access. Please check your connection settings & try again.

Now FreeSSHd has forums, but for some reason I get get past the challenge textbox. I've tried several times with different browers. It just wont let me post a question there.

I've looked in the firewall section in the control panel, but I dont see anything about FreeSSHd to enable?

Any help or ideas?

Thanks.

A:Firewall & a VNC connection error

If it helps anyone, in the FreeSShd settings, under Server Status

SSH server is not running

and has a big red X

Where it actually should be running with a green check, but isnt.

Right under neath it there is a "Click here to start" link, but even though I am able to click it, its not activating?

I'm going to assume this is whats holding up the firewall?

1 more replies
Answer Match 36.96%

firewall won't work/open S.O.S I get the error: 0x80070424 when I click on "use the recommended setting/usar la configuracion recomendada"
 
 
 
Edit: Nevermind I fixed the problem, thanks though.

A:Firewall error 0x80070424

It appears that this issue is resolved, therefore I am closing the topic. If that is not the case and you need or wish to continue with this topic, please send me or any Moderator a Personal Message (PM) that you would like this topic re-opened.

1 more replies
Answer Match 36.96%

Im trying to allow a program through windows firewall but whenever i open "Windows Firewall" nothing happens and if i open "Windows Firewall with Advanced Security" i get this http://gyazo.com/3b11f3e41fd13f5802c8a8fc5db36b01
 

A:Windows 7 Firewall Error

Listing the program you are having trouble with would help us, help you.
 

1 more replies
Answer Match 36.96%

What does 'Certificate firewall error' mean?

How can i fix it?

Thanks.
 

A:Certificate firewall error

7 more replies
Answer Match 36.96%

My windows fire wall wont start Ive tried starting it in services and the action center but no luck, i know their might be a hardware change or virus or malware that has done this but im unable to pin point it the date of any change because Ive only just realized that the firewall was off because i wanted to block a game from accessing the Internet. Ive scanned countless times but it says its clean.  Also windows update wont install updates and system recovery doesn't work...Ive been trying to follow instructions that have been given to other people but with no luck, any help will be appreciated.
 
my PC: 

OptiPlex 760 (Late 2008)

Service Tag: 5M0YJ4J | Express Service Code: 12215778643
32 bit operating system win 7 home premium 
 

 
many thanks

A:!!firewall error 1075!!

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane. When Speccy opens you will see a screen similar to the one below.  Click on File which is outlined in red in the screen above, and then click on Publish Snapshot. The following screen will appear, click on Yes.  The following screen will appear, click on Copy to Clipboard.  In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.  Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkbox: List Installed Programs Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post. Try the following.  Click on the Start orb, then type Services in the Search programs and files box. Services will appear above the search box under Programs, right click on Services and choose Run as administrator. When Services opens scroll down to until you find Windows Firewall, double click on it. Click the Startup type box and make sure it is set to Automatic, if it isn't click on Automatic. Look in the Service status to see if it is running, if it isn't click on Start, then click on Apply, then OK. Scroll down to Base Filtering Engine and doulbe click on it.... Read more

11 more replies
Answer Match 36.96%

The bfe i running just fine but my firewall still is showwing that in not using recomended settings and i can't change them and it will not start up says error 5

A:[SOLVED] firewall error

Hi and welcome to TSF which version of win 7 do you have what firewall are you using and what is bfe what do you see in the configuration pages for your firewall please answer each question

19 more replies
Answer Match 36.96%

i have tried command prompts...nisch sumthn or other and changed the environmental variable and it pops up with firewall cannot be accessed ... at all!
 

More replies
Answer Match 36.96%

Greetings everyone.
One of my refurbished for charity PCs has come back with a problem. Having been normal for months (XP Home, Firefox, OE etc) a broadband connection problem developed, which I fixed. What I can't discover is the root problem of an error message that crops up repeatedly when accessing the Control Panel: An exception occurred while trying to run C:\Windows\System32\firewall.cpl. Everything slows down, Task Manager shows a two second or so flicker but no excessive processor use. System Restore fails to operate - error message after request to reset to an earlier date. Firewall doesn't run.
I have full scanned with Avast, sent some malware to the Chest: scanned fully with Superantispyware, nothing found.I attach a Hijackthis scan file.
Thanks in advance
 

A:Peristent firewall.cpl error

Made a mess of attaching the Hijackthis file
 

2 more replies
Answer Match 36.96%

Hi, Ive had my computer for less then a year windows 7 and recently I have tried to install a virus protection program for it. It is not protecting my computer, apparently my firewall is disabled but when i go to enable it i get this error code 0x80070424. Please help I cant even shut down my computer without having to restore it every time.

A:Window Firewall error

Welcome aboard Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

17 more replies
Answer Match 36.96%

Hi, I need help with a problem I have with the firewall in Windows XP SP3.CPU: AMD 2600 +, RAM: 1.5 GB HDD: 80 BG (2 partitions).The computer crashed when playing a game (Roller Coaster). After Resetting there was a Blue Screen of Death, reset couple of times and Windows run the chkdsk and repaired some errors in the 2nd partition.But now Windows takes much time to load and when finally succeeds, doesn't load the service Windows Firewall / Internet Connection Sharing (ICS), so I have no firewall or internet.The event viewer gives me the following information: The Windows Firewall / Internet Connection Sharing (ICS) service terminated with the error: The system can not find the file.Try to start it manually but I get the same error.I tried the command rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132% windir% \ inf \ netrass.inf but the installation fails.I reinstalled the service pack 3 for windows XP.I tried to uninstall the service but it says there is no such service.No errors on C: with chkdskSystem restore doesn't workNod32 & Unhackme doesn't find any problemI can not solve this problem ...Here is my last topic: http://www.bleepingcomputer.com/forums/topic359123.html/Here are the logs**GMER makes the computer crash, so I don't have the log**DDS (Ver_10-11-08.01) - NTFSx86 Run by Administrador at 15:56:04,87 on 07/11/2010Internet Explorer: 8.0.6001.18702Microsoft Windows XP Professional 5.1.2600.3.1252.34.3082.18.1535.1138 [GMT -6:00]... Read more

A:Error Windows Firewall/ICS

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about your PC, we need a new log to see what has changed since you originally posted your problem.We need to create an OTL ReportPlease download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.In the custom scan box paste the following:

msconfig
safebootminimal
activex
drivers32
netsvcs
%SYSTEMDRIVE%\*.exe
/m... Read more

11 more replies
Answer Match 36.96%

Hi,I initially had a google redirect malware and Win 7 Home Security 2012.I followed the instructions found at link to remove the Win 7 security.Afterwards I noticed on mcafee that my firewall was disabled and I was not able to turn it back on.When I tried to turn on the windows firewall I received the following error: Error Code 0x80070424I saw other posts on Bleepingcomputer.com where they seem to be having the same exact problem and followed the instructions there but the firewall issue still remains and I still get some random pages that pop up at times.Here are the links to the similar issue: http://www.bleepingcomputer.com/forums/topic431471.html http://www.bleepingcomputer.com/forums/topic431131.htmlI have run rkill, TDSSKiller, Superantisypware, MalwareBytes, and GMER.Thanks in advance.

A:Win 7 Firewall Error 0x80070424

Hey, I was having the same issue, found this post on here, imported the reg keys and it worked for me. Recent infection messed me up, used mbam, emsisoft, combofix, trend housecall and sas, to clean pc. Avast didn't stop it from getting in, so I might be switching my antivirus. Good Luck

http://www.bleepingcomputer.com/forums/topic430142.html

-check windows defender, the infection corrupted it also.

1 more replies
Answer Match 36.96%

Every time I try to start my firewall from the control panel, no matter what I press, I always get the same screen telling me to update my settings with a red bar on the side.

If I click on advance settings however, it opens the windows firewall with advance security screen and tell me that there was an error with snap-in and gives me the error code 0x6d9.

I have already tried starting the windows firewall service while in administrator mode but it also gives me and error 'service specific error code 5'.

I have run out of ideas.

A:0x6d9 Firewall error

Welcome aboard Please download Farbar Service Scanner Download Link and run it on the computer with the issue.Make sure the following options are checked:

Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

18 more replies
Answer Match 36.96%

i am using windows 8 with quick heal antivirus pro.my windows firewall is not running and i do not get any response from "use recommended settings " of firewall.
in services.msc
my bfe service is running.whenever i am going to start windows firewall service it gives me error which specified in attach file.
then i found out that my system was infected by "trojan.sirefef" virus.i had tried online scaner but it wont help.my quick heal is up to date.
i dont know what to do now.
 
 
 

More replies
Answer Match 36.96%

Hi,

I've installed a program on a WinXP SP2 computer and I need to open a specific port in the firewall to allow the program to work. However, when I go to open/change the firewall settings via Control Panel --> windows firewall and click on it, I get a "firewall has encountered a problem" error (this is not the exact message as the computer is in a foreign language so this was the basic message as told to me by the interpreter). The firewall status is currently "ON" and I have no intentions to turn it off however I really need this port to be opened. Is there anyway I can open a port without going through this method? or does anyone know a possible cause for this?? any help would be much appreciated. Thank you.
Regards

Steve
 

A:Windows Firewall Error

scooby_steve said:

Hi,
I've installed a program on a WinXP SP2 computer and I need to open a specific port in the firewall to allow the program to work. However, when I go to open/change the firewall settings via Control Panel --> windows firewall and click on it, I get a "firewall has encountered a problem" error (this is not the exact message as the computer is in a foreign language so this was the basic message as told to me by the interpreter). The firewall status is currently "ON" and I have no intentions to turn it off however I really need this port to be opened. Is there anyway I can open a port without going through this method? or does anyone know a possible cause for this?? any help would be much appreciated. Thank you.
Regards
SteveClick to expand...

Hi Steve,

First, Windows Firewall is an inbound firewall only. So, if any nasty gets onto your system while the port is open, you won't be notified of any outbound connection attempts on behalf of the nasty.

I would download ZoneAlarm Free or Sygate Personal Firewall (free for personal use at home) and turn off Windows Firewall after installing either of the above. The benefit of doing so will get you outbound notifications and stealth your ports which you can test at http://scan.sygate.com

The most import capabilities of a firewall (there are more) are to:
1) stealth all of your ports
2) notify you to Allow or Deny outbound connection attempts
3) not respond or port forward any i... Read more

2 more replies
Answer Match 36.96%

I am having a problem with my Windows firewall, I received this error code 0x6D9 & not sure what this means. It's also saying my Windows Firewall is not usting the recommended settings to protect my computer error code 0x80070424. Please help I'm trying to keep from having unnecessary viruses on my computer.

Thank you so much, Msldeneen

A:Window Firewall Error

Hi Msldeneen.
My name is Mekh and I work for the Social Media and Community Team.
You can go through Microsoft Knowledge Base article that you find at the following address
http://support.microsoft.com/kb/2530126
Let me Know what happens.
Regards,
Mekh Subba
Dell | Social Media & Community

2 more replies
Answer Match 36.96%

Hello I recently had a virus in my computer rkb.exe or whatever it was. When I deleted the virus it took the internet with it. But I was able to remove it with one of the threads on here but now I am receiving an error message when I try to activate my fire wall.

Windows Firewall can't change some of your settings. Error code 0x80070424
I am using Malwarebytes to see if there are any more infected objects for the third time. The last time I use it, it found 1 infected item.

Please could somebody assist me. Thank you

A:Error Message Firewall

HiDownload both the registry fileshttp://www.mediafire.com/?317ea53a883288dhttp://www.mediafire.com/?z6aw8j7997qa7j9Launch and import them to registryRestart your PCNow,open RUN and typeregedit and click okgo toHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFERight click on it-permissionsClick on ADD and typeEveryone and click okNow Click on EveryoneBelow you have permission for usersSelect full control and click okNow,open RUN and typeservices.msc and click okstart base filtering engine service and then windows firewall service

1 more replies
Answer Match 36.96%

Hi.

When I go to control panel>windows firewall>advanced settings I get the following error:

"There was an error opening the windows firewall with advanced security snap-in." It then says I do not have the correct security permissions, even though I am an administrator account.

How do I fix this problem? I have Googled this problem, but I have had little success with any of the solutions found. Any help would be appreciated, thanks!

A:Firewall opening error

Farbar Service Scanner

Click here Farbar Service Scanner to DOWNLOAD

Place the file onto your desktop

Right click on FSS.exe select

Place a check mark next to the following options
⬜ Internet Services
⬜ Windows Firewall
⬜ System Restore
⬜ Security Center
⬜ Windows Update
⬜ Windows Defender

Press the Scan button

Farbar Service Scanner will create a log, called FSS.txt, on the Desktop. Upload the FSS.txt with your reply

9 more replies