Tech Problem Aggregator

Error messages from firewall

Q: Error messages from firewall

My firewall (NIS 2003) has been generating error messages lately, the

“xxx has caused an error in yyy. xxx will now close”

kind of messages.
I just get them once in a while, and the program seems to be working fine in spite of these errors.

But, do the messages mean that the program has somehow gone bad and it’s not protecting me the way it should any more?

I’ve ran several virus, trojan and port scans and they all came clear. I’d hate to have a false sense of security, though. Would it be better to just remove it and reinstall it?

What’s your advice? …..

Thanks!

A: Error messages from firewall

10 more replies
Answer Match 62.16%

Looking for a firewall on here, I found a link to ZoneAlarm. When I tried to download it, I got the error messages: "Could not load the DLL library C:\Windows\system\kernel32.dll. An attempt was made to load a program with an incorrect format." I clicked ok, then got the following: "Could not load the DLL library C:\Windows\temp\vsutil.dll. One of the library files needed to run this application cannot be found." Now what? Is there a way to fix this, or another firewall I could try? Thanks for the help. You all have been wonderful in dishing it out to me lately .
 

A:ZoneAlarm error messages-need a firewall

Well, I did some hunting of my own, and for anyone else who needs a firewall, I got one from this url: http://www.majorgeeks.com/downloads34.html. It downloaded and installed with no problem.
 

2 more replies
Answer Match 49.56%

I was trying to install an HP Printer. It would not install. I called HP and an HP Tech accessed my computer remotely. He pulled up a bunch of error and stopped working messages. He said my computer was about to crash. He wanted a ton of money to fix it. I have no money, so here I am. I have attached a summary of my computer. I am really computer stupid so any help I can get will be truly appreciated.
Annette Manaclay

A:[SOLVED] Error messages and stopped working messages, Windows 7

I don't know where to begin. Let's start be deleting all old versions of Java in your control panel and updating at: java.com: Java + You
Also, stop using ToolWiz and Optimizer Pro These Registry Cleaners cause the kind of problems you're experiencing.

19 more replies
Answer Match 47.88%

In the latest Avast How do you turn off Firewall messages ?

More replies
Answer Match 46.62%

Hey BC community,Note: I have never had a problem like this before, it has just started this week.I play maplestory, and this program detected something wrong with my firewall. So I proceeded to my security settings and attempted to edit my firewall settings: turn it on/off and then this error code popped up:So I tried to edit the other settings and the same error code came up each time.After that came up SEVERAL TIMES, I went to a microsoft and other forums to search for help. They told me to go to this window:And said to go to: Windows firewall and do something with it...but it's not there to do anything to? I really have NO IDEA what to do! It isn't effecting me that much, but when i start my Maplestory file up to reinstall it, it closes and it says this:[04/08 01:54:15] Install Start[04/08 01:54:16] User Temp Directory : C:\Users\Devin\AppData\Local\Temp[04/08 01:54:16] Use CRC : false[04/08 01:54:16] File Name : C:\Users\Devin\Desktop\MSSetupv108.exe[04/08 01:54:16] Game Code : 33563155[04/08 01:54:16] Cannot Regitster Firewall(C:\ProgramData\NexonUS\NGM\NGM.exe,Nexon Game Manager)[04/08 01:54:16] ErrCode : 14000 - 404 - 0[04/08 01:54:17] Install Path : C:\Nexon\MapleStoryI have downloaded microsoft anti virus things and they "cleaned up" my computer, but it still hasn't changed anything. Help?Sincerely,Devin

A:Windows 7 Firewall error code: 0x80070424 as well as Firewall Service being Removed

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) DownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results here

15 more replies
Answer Match 45.78%

A friend gave me his laptop PC to remove some virus' and any Malware.  Well I think I have all the bad stuff off but I noticed that the firewall wasn't running.  I looked in services to start it but it's not there.  I down loaded Microsoft security essentials but that didn't help.  Have you any ideas?  Is there something I can run to find it? Thanks,klclarkEdit: Moved topic from Firewall Software and Hardware to the more appropriate forum, at the suggestion of staff. ~ Animal

A:firewall error 0x80070424 firewall not in the services window

Hello klclark and Welcome -
 
Download Security Check by Screen317 from HERE
* Save it to your Desktop.
* Double-click SecurityCheck.exe
* Follow the onscreen instructions inside of the black box.
* A Notepad document should open automatically called checkup.txt; please post the contents of that document.Note: If a security program requests permission to access the Internet, allow it to do so.
 
Next -
Error 0x80070424 ocurs when you use Windows Update follow the M/soft fixit for your version of Windows -
 
Thank You -

1 more replies
Answer Match 44.94%

I have used this link Diagnose and fix Windows Firewall service problems automatically and downloaded the fixer. This told me that the problem may be occurring because of a group policy or Norton security firewall program. I do not know how to change either of these. Any sort of help would be much appreciated.

A:Error Code 5. Firewall. Firewall does not start.

Do you have norton security installed?

If so it uses its own firewall, in which case you do not need windows firewall on. You should not run more then one firewall at a time.

1 more replies
Answer Match 43.26%

Split from here: http://www.bleepingcomputer.com/forums/t/436093/windows-7-firewall-error-code-0x80070424-windows-firewall-service-missing/ ~ OB
 
Can u help me please 
 
Farbar Service Scanner Version: 03-03-2013
Ran by Anda (administrator) on 05-04-2013 at 20:51:47
Running from "C:\Users\Anda\Desktop"
Windows 7 Professional Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Attempt to access Yahoo IP returned error. Yahoo IP is offline
Yahoo.com is accessible.
 
 
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.
 
MpsSvc Service is not running. Checking service configuration:
The start type of MpsSvc service is OK.
The ImagePath of MpsSvc service is OK.
The ServiceDll of MpsSvc service is OK.
 
bfe Service is not running. Checking service configuration:
The start type of bfe service is OK.
The ImagePath of bfe service is OK.
The ServiceDll of bfe service is OK.
 
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
 
System Restore Disabled Policy: 
========================
 
 
Action Center:
============
wscsvc Service is no... Read more

A:Split from: WIndows 7 Firewall Error Code 0x80070424 Windows Firewall Service Missing

Please download TDSSKiller from here and save it to your DesktopDoubleclick on TDSSKiller.exe to run the application, then click on Change parameters
Check Loaded Modules and Detect TDLFS file system. Do not check Verify file digital signatures (even though it is checked in the example)If you are asked to reboot because an "Extended Monitoring Driver is required" please click Reboot now
Click Start Scan and allow the scan process to runIf threats are detected select Skip for all of them unless I instruct you otherwiseClick Continue
Click Reboot computerPlease post the contents of TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)in your replyDue to forum upgrade you may face issues posting the TDSSkiller log.Just last few lines of log is sufficient===================================================RKILLPlease download Rkill by Grinler from one of the 4 links below (if one of them does not work try another.) and save it to your desktop:Link 1Link 2In order for Rkill to run properly you must disable your anti-malware software. Please refer to this page if you are not sure how.Double-click on Rkill. (If you are using Windows Vista, please right-click on it and select Run As Administrator)Note: You may have to run Rkill a few times before it is successful. You may also have to download Rkill from a different link which will save it as a different file name.A black screen will appear and then disappear. Please do not worry, that is normal... Read more

1 more replies
Answer Match 42.84%

Recently had a virus infection and noticed that the windows firewall service is missing. When trying to reset to recommended settings by using control panel received error code 0x80070424. Cannot access other computers or shared files/folders on home network. Saw a previous post dated 12-17 that appears to be the same problem.

A:WIndows 7 Firewall Error Code 0x80070424 Windows Firewall Service Missing

Welcome aboard Had the infection been cleaned since?Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

21 more replies
Answer Match 42.42%

I am using Windows ME in a new Dell Dimension 4100 series, Pentium 3, 1.1 gig, MSN Office 2000 Professional.

I am having trouble saving a word document that was e-mailed to me. I did a "save as" into "my documents." Then I changed something in the document, and I saved it. Upon closing the document I was asked if wanted to save changes and I said yes.(this confused me as I don't normally get this when I do the normal 'save' under the 'file tab')
Later when I went to open this document, I got an error message, "Locked for editing by another user, click notify to open as a read only copy". When I clicked on notify, I got another error message,"Winword has caused an error in winword.exe. Winword will now close.Try restarting your computer."

When I tried to delete this document, I got the message "Cannot delete file. Access is denied. Source file may be in use."

I experimented and again saved into my documents, again made a change, hit save and closed the doc. When I got the message asking me if I wanted to save the changes, I said no. This procedure enabled me to reopen the document.

I don't understand what is happening and why the key seems to be how I answer the question, do you want to save the changes?

Can someone help?
Thanks
 

A:Word doc-error messages: locked, winword error, source file

SOUNDS LIKE (tho I'm not sure), that Word didn't exit properly at least that one time. Next time it happens, and you believe Word to be closed, hit Ctrl-Alt-Del and see if "winword" is still in the task list. If so, click on it and hit End Task. Then delete your file.

If your programs aren't "really" closing down, you may just need to clean up your hard drive. Follow the instructions at:

http://www.piersontech.com/07-CleanHardDrive.htm
 

1 more replies
Answer Match 42%

I am having problems with my computer starting in safe mode all the time. I have tried going into msdos and putting in boot 0 and changing read only stuff back again but to no avail.(ie) brindle 10-20-03.. help! I must have changed something some where eh? Also I keep getting these error mess. more and more. I have aim and just recently it started giving me mss about that and if I don't catch the pop up window that comes with aim, in time then my puter freezes on me and I have to shut down and go in again.. Also....... I am still getting the start up mess of a file is missing and to delete and uninstall etc etc then it has Mcaffee system ini etc etc ,...Well I went and deleted all Mcaffee stuff as recomemned by styxx and am still getting this at start up? HELP I am ready to throw this out the window... no pun intended! My husband thinks I have ruined his computer and is still giving me dirty looks..... I have windows 98se. 254 mgbytes memory, I think,and have dsl...Help
 

A:safe mode and startup error and error messages

Have you tried going into set-up and resetting all controls to "default setting"?

You're computer is most likely going into default mode because there is something else wrong with it.

You most likely haven't ruined it........jus need to take this one step at a time

What were the first error messages you were getting?

What happened the first time your computer started in safe mode all by itself?
 

1 more replies
Answer Match 41.16%

Hello - I have a Toshiba Satellite laptop and for the last few days - I've suddenly gotten error sounds without any error messages - I've checked the administrative tools event log but can't really locate the source of the sound. What could be causing this? thanx in advance for the help

npsmith34

A:Error sound without error messages on laptop

Hello npsmith34,

Okay so you have weird sounds

Can you describe these sounds ? are they beeps ?are they clicking sounds ?

When a computer starts making sound it could be many things as in

over heating

bad fans

hard drive issues

cd rom issues

and many other things

Let me know

ATKrider

1 more replies
Answer Match 41.16%

I'm being bogged down with script error messages, error report request and the odd IE6 termination. Here is a copy of my HiJack This log (saw another post with similar questions and that was what was requested, so here it is). I have a HP Pavilion pc running Windows XP Home Edition. Hope someone can help because these constant error messages are driving me nuts.

Logfile of HijackThis v1.98.2
Scan saved at 11:40:16 AM, on 9/19/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\svchost.exe
C:\windows\system\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\Unload\hpqcmon.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\PROGRA~1\Logitech\MOUSEW~1\SYSTEM\EM_EXEC.EXE
C:\Program Files\MSN Apps\Updater\01.02.3000.1001\en-us\msnappau.exe
C:\WINDOWS\LTMSG.exe
C:\Program Files\Java\j2re1.4.2_05\bin\jusched.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\PROGRA~1\HPINST~1\plugin\bin\pchbutton.exe
C:\Program Files\Hewlett-Packard\AiO\hp officejet v series\FRU\Remind32.exe
C:\Documents and S... Read more

More replies
Answer Match 40.74%

So when i try to get Windows Firewall to run on recommended settings i get error 0x8007042c.
So far i have tried-
all four methods on the microsoft help page here:
?0x8007042c? error message when you try to start Windows Firewall
when i tried manually starting it i got error 1068 the dependency service or group failed to start

Ive also tried
Sharrow's "Most helpful Reply" on this page-
Windows could not start Error 1068: The dependency or group failed - Microsoft Community
although i dont have aland line so idk if what i did affected it well or not... person who wrote the thing had a wlan so idk if what i did was wrong.. anyone wanna let me know?

it didnt help either.

so i ran sfc /scannow on elevated command prompt and got it to my desktop (learned how to do that today )
here is what i got on it.... can anyone help me figure out what the issue is and how to solve it?
im only gonna post the stuff it cant repair, i dont think yall need the other stuff.

a third of the way through-
2014-01-06 10:56:16, Info CSI 000000e8 [SR] Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-01-06 10:56:16, Info CSI 000000ea [SR] Cannot repair member fil... Read more

A:Windows Firewall error 0x8007042c + error 1068 (manually starting)

Welcome to the WSF, Junyahh!

Please use the following diagnostic tool. It has a powerful detection mechanism, and may help us get to the cause of your issues:

Please use the Farbar Recovery Scan Tool.
Download: Farbar Recovery Scan Tool Download
Select the version that applies to your system.
Save it to your Desktop.
Double-click the downloaded file to run it.

When the tool opens click Yes to the disclaimer.
At the program's console, press the Scan button.

When done, the tool produces a log, FRST.txt, in the same directory from which the tool is run (Desktop).
Please provide the FRST.txt in your reply.

The first time the tool is run, it also makes another log: Addition.txt
Also post the Addition.txt in your reply.


Also, use the Farbar Service Scanner
Download: Downloading Farbar Service Scanner

Let's get a view of all services and dependencies scoped by the tool...
Make sure the following options are checked:

Internet Services
Windows Firewall
System Restore
Security Center
Windows Update
Windows Defender

Press: Scan

When done, FSS creates a log, FSS.txt, on the Desktop.

Please provide the FSS.txt in your reply.

Thank you.

1 more replies
Answer Match 40.74%

So my laptop has a bunch of problems. It started out as a virus infection then I found out more problems.

First of all, thank you to Broni for directing me to the thread that tells me to run DSS.

I can't run a systems restore. I get the 0x800700B7 error. As well, Systems Restore says that I've never had a Systems Restore done before, which I think is odd, because I recall seeing Systems Restores created last time I checked (maybe a year ago?)

I also can't turn on Windows Firewall. I get the "Windows can't start the Mpssvc" message.

Here's my AVIRA log:

Avira Free Antivirus
Report file date: December-17-12 18:09
The program is running as an unrestricted full version.
Online services are available.

Licensee : Avira Free Antivirus
Serial number : 0000149996-ADJIE-0000001
Platform : Windows ™ Vista Home Premium
Windows version : (Service Pack 2) [6.0.6002]
Boot mode : Normally booted
Username : me
Computer name : ME

Version information:
BUILD.DAT : 13.0.0.2890 Bytes 05/12/2012 17:18:00
AVSCAN.EXE : 13.6.0.402 639264 Bytes 11/12/2012 14:42:33
AVSCANRC.DLL : 13.4.0.360 54560 Bytes 11/12/2012 14:42:33
LUKE.DLL : 13.6.0.400 67360 Bytes 11/12/2012 14:43:12
AVSCPLR.DLL : 13.6.0.402 93984 Bytes 10/12/2012 14:41:39
AVREG.DLL : 13.6.0.406 248096 Bytes 10/12/2012 14:41:32
avlode.dll : 13.6.1.402 428832 Bytes 10/12/2012 14:41:41
avlode.rdf ... Read more

A:System Restore Error, Windows Firewall Error and a bunch of viruses

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps.===Please download ComboFix from any of the links below, and save it to your desktop. For information regarding this download, please visit this web page: http://www.bleepingcomputer.com/combofix/how-to-use-combofixLink 1Link 2* IMPORTANT !!! Save ComboFix.exe to your DesktopIMPORTANT....1. Close any open browsers.2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.3. Do not install any other programs until this if fixed.How to : Disable Anti-virus and Firewall...http://www.bleepingcomputer.com/forums/topic114351.htmlDouble click on ComboFix.exe & follow the prompts. When finished, it will produce a report for you. Please post the C:\ComboFix.txt Note:Do not mouse click ComboFix's window while it's running. That may cause it to stallNote: If you have difficulty properly disabling your protective programs, refer to this link --> http://www.bleepingcomputer.com/forums/topic114351.htmlNote: If after running ComboFix you get this error message "Illegal operation attempted on a registry key that has been marked for deletion." when attempting to run a program all you need to do is restart the computer to reset the registry.===Please download Farbar Service Scanner and run it on... Read more

65 more replies
Answer Match 40.74%

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

15 more replies
Answer Match 40.32%

I am using Windows 8.1 with MBSA 2.3 . 
I run the scan and get the following error: 








Windows Firewall tests cannot be done due to an error. (0x00000001)








What can be done to resolve this issue ?
Thanks
M

More replies
Answer Match 39.9%

While browsing the Internet, I came across a website while searching
for
something. A message came up from IE warning me this could be a
phising
site. I quickly left the site. I cleared cookies and ran Ad-Aware. PC
seemed
fine. Recently, I could not get onto the Internet with either IE or
Firefox.
I ran WinsockXPFix and was able to get onto the Internet. This error
message
comes up right away when the PC gets to the desktop: Generic Host
Process for
Win32 Services has encountered a problem and needs to close. For
Windows
Firewall, the message is could not start the Windows Firewall/Internet
Connection Sharing service on Local Computer. Error 5: Access is
denied. I
ran Ad-Aware again and used Trend Micro's Online program. They both
just
found cookies. I have followed the steps from these websites:
http://windowsxp.mvps.org/sharedaccess.htm ,
http://support.microsoft.com/kb/892199/en-us

I still am having issues. Any suggestions will be greatly appreciated.

From the first website, this is what I did:
Download sharedaccess.reg (only for systems running Windows XP Service Pack 2) and save to Desktop. Then double-click the file to merge the contents to the registry. The Services entry will be created. Restart Windows (mandatory step, otherwise the following NETSH command will display an error message).

After restarting Windows, run this from Command Prompt (cmd.exe)

NETSH FIREWALL RESET

Launch firewall applet from Control Panel, and then configure your Windows Firewall s... Read more

A:Solved: Process error and Windows Firewall Error

16 more replies
Answer Match 39.48%

Hi to one and all; (Microsoft XP Professional)
Whenever I try to move to from one site to another, I hear a thunder-lke noise, and then get these 2 messages:
Line 367 Error:'yg_tabs.0.2' is null or not object
Line 404 Errorbjected expected
If anyone can assist me with what sequence of clicks I have to preform in order to get rid of these 2 problems, I will appreicate it very much.
Maury
 

More replies
Answer Match 39.48%

Good morning,
 
   I keep getting these messages every time I try to update anything.  windows error 80131506,    users\owner\app data\local\apple\apple software update\   
and c:\programs files 
9x86)\iolo\common\system shield\    
 
I'm not to computer savoy but can manage to get around.
Thanks,
Runningwater

A:error messages

 
Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download. 
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.

 
==========
 

Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.

1 more replies
Answer Match 39.48%

Hi,

I am need some help. I have 2 problems right now and I am not sure if they are related or not. Everytime I try to upload a photo to a Yahoo group photo album I receive an error message "DNS error, cannot find server". This message disappears when I refresh and just hang out on the Yahoo site. This just suddenly started happening. Yahoo has been no help nor has Earthlink. I have deleted cookies and tried every suggestion offered by the error page, but nothing works.

Also, I cannot click on email links and get to the actual email. This also just started. I get "default mail client not properly installed" as an error message.

About 2 months ago I installed and then uninstalled Earthlink's Total Access CD. I tried to clean out my hard drive when I uninstalled by deleting things I didn't think I needed anymore. This is the only thing I can think of that I have done that may have changed things.
I am not a computer whiz by any means, but I am "computer frustrated". Does anyone have any advice about what I could try? Please be specific because I am not sure I have the background information many of you have. Thank you so much.
 

A:2 error messages I can't seem to fix

Hi hokieflag92, before we dive in on the DNS error, I need to know how you connect to the internet. Do you have broadband or dialup, and who is the provider?

As far as your e-mail problem. Lets check the simple solution first. Click Start, then Control panel. Under control panel look for Internet Options. After opening internet options, look for and click the programs tab up near the top. Look under E-Mail. Is your e-mail program listed their? If not, click the drop down arrow and see if it is in the list. If it is, select it, click apply. then click ok. Now try clicking on an e-mail link again and see what happens. Let us know
 

3 more replies
Answer Match 39.48%

I went to the website and was excited, but it didn't work. I contacted Dell and still can't reinstall itunes. I'm not getting error 1327 invalid drive F, I'm getting error 1606 could not access network location %userprofile%\my pictures. I'm waiting for Dell to contact me by phone. I told them that I wasn't having any problems until I installed the memory and optical drive I got from them.

A:Error Messages

Welcome to BCI went to the website and was excited, but it didn't work.What website and what doesn't work?

1 more replies
Answer Match 39.48%

Hi all,

I have received the following two baloon messages with an exclamation mark in a triangle in the top left corner of the baloon.

System alert: [email protected]
Type Spyware/trojan
Vulnerable Windows 95/98/ME/NT/2003/Windows XP
Description Spyware program that sends confidential information to a remote attacker
Protection Click this baloon to download official security software

AND

System alert: Malware threats
Your computer is infected with a back door Trojan that allows the remote attacker to perform various malicious actions. Click this baloon to download malware removal software

I have ran the Hijack scan, and have copied the following text from the notepad.

Can you help me further please

Kiel

Logfile of HijackThis v1.99.1
Scan saved at 20:50:13, on 19/10/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logitech\lvmvfm\LVPrcSrv.exe
C:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exe
c:\program files\mcafee.com\agent\mcdetect.exe
c:\PROGRA~1\mcafee.com\vso\mcshield.exe
c:\PROGRA~1\mcafee.com\agent\mctskshd.exe
c:\PROGRA~1\mcafee.com\vso\OasClnt.exe
c:\program files\mcafee.com\vso\mcvsshld.exe
c... Read more

A:Error messages

Hi and welcome

Please download SmitfraudFix (by S!Ri)
Extract the content (a folder named SmitfraudFix) to your Desktop.

Open the SmitfraudFix folder and double-click smitfraudfix.cmd
Select option #1 - Search by typing 1 and press "Enter"; a text file will appear, which lists infected files (if present).
Please copy/paste the content of that report into your next reply.

Note : process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool"; it is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.
http://www.beyondlogic.org/consulting/proc...processutil.htm
 

1 more replies
Answer Match 39.48%

I keep getting various error messages on my networked computer. Rebooting helps, but the problems reoccur, sometimes after just a few minutes.

When I click on any file on the desktop, "Not enough quota is available to process this command," but even if I exit out of all open programs this message still appears.

After pressing Ctrl+Alt+Delete and clicking on Task Manager, "The application failed to initialize properly (0xc0000017). Click on OK to terminate the application."

When clicking on a shortcut to a network folder, "The drive or network connection that the shortcut 'customers on ...' refers to is unavailable. Make sure that the disk is properly inserted or the network resource is available, and then try again."

Please help. Thanks!
 

A:Error Messages

Hello pealow:

Could you please post your system specs. If you look in your account profile here at TSG, there is a place where you can add your specs. They will appear above all your posts as a small computer that can be clicked on, so that techs can see them. Helps to post them in your posts, too.

If you could, please include in your specs for this post the OS and also how large your main hard drive is and how much free space there is on the drive...
 

2 more replies
Answer Match 39.48%

Starting this morning, I am constantly getting all kinds of 'error' messages. I ran a full scan and it came back with no threats detected. I know very little about computers but I want to stop these messages!!
I have an Aspire laptop running Windows 7.
 

A:Keep Getting 'Error' Messages

If this is a malware question, you should follow the instructions in this sticky thread to provide the trained antimalware helpers with the information they need about your computer.
http://forums.techguy.org/virus-other-malware-removal/943214-everyone-must-read-before-posting.html

Just as important is providing a description of what's actually going wrong. What are these error messages and what seems to trigger them? From your description it is possible that there isn't any malware involved at all.
 

3 more replies
Answer Match 39.48%

During startup several error messages pop up. Each pop up says ( '[explorer]' being the only difference):

[explorer].exe Bad Image

C:\Windows\System32\diskcopy32.dll is either not designated to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support

This just began happening today, but I don't want it to get worse..What can I do to fix this?

A:.exe Error Messages

Reading through similar problems posted by others it seemed like it might be relative information that very recently a hotmail e-mail account that I have had for a very long time was blocked by the system administrators. It was sending junk mail to a bunch of recipients that I don't know and in turn was getting postmaster delivery failure notices in the inbox for all of them.

2 more replies
Answer Match 39.48%

Hi, I really really need your help. I bought a laptop about 2 months ago which is toshiba a110 and it has been working fine up until now. However, I tunred it on yesterday and a ridiculous amount of error messages keep coming up on the screen. They always say the same thing which is "C:\Windows\System32\COMMDLG32.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." However at the top of the message there is always a different saying such as "Itunes helper" and then it says bad image.
The error message that repeatedly keeps coming up at the top of the box is always this "mskagent.exe"
I really hope you can help me asap because its so frustrating!!
Thanks
 

More replies
Answer Match 39.48%

Every time I turn on my computer I get a message saying:
pcnotify.exe application error. The application failed to initialize properly (0xc0000135). Click ok to terminate the application.
I dont know what this means and how to get rid of it for good, can anyone help!
 

More replies
Answer Match 39.48%

I recently moved and when I plugged my computer back up everything was a mess. I got the mouse and keyboard working and got rid of several viruses among other things. I believe that my computer is clean now; however the printer won't work, I get a "One Button Application" error message that reads, "The Service has returned a service-specific error code". Also, my Windows Media Player won't run. The error message is, "Cannot play back the audio stream:no audio hardware is available, or the hardware is not responding." I don't know what this one button application is. Thanks in advance for your assistance.
 

A:error messages HELP, HELP, HELP!!!!

First Question:

Are you running an HP computer?

I ask because HP has a One Button Disaster Recovery. If you are trynig to run the service as a user account and not a Local System Account you will get that error. Any service that tries to run as a user account can get a simular message.

Try
Right-click My Computer and from the drop down menu click Manage.
From the Services and Applications menu, click Services.
From the right scroll down menu, double-click Task Scheduler.
Click the Log On tab, select the Local System Account and Allow Service to Interact with Desktop options, and then click Apply.
Click the General tab, click Start.

from Microsoft KB article 223170

I would also ensure you have all the latest drivers (NIC, Video, Audio and DirectX). Once you have them all downloaded:

Right-click My Computer, select Manage.
In the left side highlight Device Manager.
In the right side, expand (click the "+") Display Adapters and right click every adapter listed and choose Uninstall.
Do the same for Network Adapters.
Expand Sound Video and Game Adapters, find the one on the list that represents your Audio Card and uninstall it.
From the Action drop down list, choose Scan for Hardware Changes.
Once they have all been replaced, Update DirectX (never let DirectX have the last word on your drivers) then update the drivers (if you weren't prompted to do so during the 're-discovery')

Let me know how it goes
 

2 more replies
Answer Match 39.48%

the instruction at"0x082e45f8"referenced memory could not be read and

error loading/downloaded programs files/bridge thanks
xp
 

A:error messages

Bridge is malware. You should post a log for us to review.

Make a folder on your hard drive, like My Documents\HJT
Download Hijackthis.
Unzip the file to the folder on your hard drive.

Double click on Hijackthis.exe then click on the "Scan" button, then click on "Save Log".

Copy and paste it back here and someone will be happy to review it.

Don't make any changes until instructed to do so.
 

1 more replies
Answer Match 39.48%

windows xp
I keep getting Error LoadingC:\Progra~1\bar\4.bin\m3plugin.dll message when I start up my computer and I do not know how to fix it.
 

A:error messages

C:\Progra~1\bar\4.bin\m3plugin.dll is related to MyWebSearch, a well known type of malware.

Please click on the Report button and kindly ask to be moved to the Malware Removal forum.
 

2 more replies
Answer Match 39.48%

Hi, I was wondering about a couple of error messages I get on start up. The one about net framework I just hit continue and the iTunes message I hit ok and iTunes works ok. Just wondering why they are coming up? I have attached 2 files. Thanks.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4040 Mb
Graphics Card: Intel(R) HD Graphics, 1796 Mb
Hard Drives: C: Total - 943808 MB, Free - 685356 MB; D: Total - 943818 MB, Free - 871817 MB;
Motherboard: Acer, Aspire X3960
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:error messages

11 more replies
Answer Match 39.48%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 Mobile CPU 1.90GHz, x86 Family 15 Model 2 Stepping 4
Processor Count: 1
RAM: 510 Mb Dell 2650, 32 Mb
Hard Drives: C: Total - 28576 MB, Free - 14945 MB;
Motherboard: Dell Computer Corporation, Inspiron 2650
Antivirus: AVG Anti-Virus Free Edition 2013, Updated: Yes, On-Demand Scanner: Enabled.

yes its an old laptop but until the present trouble it worked very well,and indeed is still working
when you select ok on the various error messages. these occur on bootup and each time
you make any change ,open or close anything change program or download anything
opening webbrowser or save anything ,the errors are all different but refer to a dll and are in system 32
all end in not a valid windows image if you open 20 or more you get a coresponding no of errors
I can if required copy each of the errors and send them to you hope have enough info ,thanks in advance Aobhill
 

A:win xp various error messages

Hi and welcome.
Run System File Checker.
Start - Run - Type
Then type.
sfc /scannow

[Note space after sfc]
You will be asked for the install Cd.

http://www.updatexp.com/scannow-sfc.html
-----
Download Security Check by screen317
http://screen317.spywareinfoforum.org/
Save it to your Desktop.

Double click the install icon.
Right click and select "Run as Administrator"
A command Prompt window will open.
Let it scan the Pc - press any key when asked.
It should now open in Notepad - and will save a log called checkup.txt.
Post the result of the scan here.
----
Post the last 5 error messages.
 

2 more replies
Answer Match 39.48%

Someone please help me...I have a Dell Dimension 4500 Series
I keep getting application error messages. Such as rundll16.exe,
explorer.exe, and numerous others. When I'm online I have a hard time searching because I always end up on Internet Optimizer and at times the pages just disappear and send me right back to my desktop. Two days after my warranty expired on it the CD/DVD drive quit working and Dell said it had gone bad, and wanted to sell me a new one. Shouldn't it last more than a year? What does this mean
The device, \Device\CdRomO, has a bad block. I am using the Windows XP home edition. This is my first post, so please help, with great detail. I don't know how to send a Hijack list...help
Thanks
 

A:error messages

10 more replies
Answer Match 39.48%

I've just started getting error messages from MS, one that states there is an Motive Smart Bridge Error: AppName: Motivesb.exe, AppVer: 5.0.0.32038,
ModName: Motivesb.ex, and Offset: 00030c29. The other error message:
Microsoft Management Console Error AppName: mmc.exe, AppVer: 5.1.2600.2180, ModName: ntdll.dll, and Offset: 00011e58.

What's going on and how can I fix this? I can be surfing the net or checking my e-mail and I receive these messages, it also states that a event log is being generated. This just started happening today I haven't downloaded or changed anything.

More replies
Answer Match 39.48%

I would find it interesting to see how many error messages show up in your event viewer, on average, each day.

I can get a lot when I am installing/configuring new hardware or software, and most of my error messages get generated on each start-up. On average when things are running reasonably well I still get 10 or 12 a day. Most (all?) of these don't seem to cause any problems for me.

In any event - how many do you get?

A:How many error messages do you get each day?

The same 3 at each startup.

9 more replies
Answer Match 39.48%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) X2 Dual-Core QL-60, x64 Family 17 Model 3 Stepping 1
Processor Count: 2
RAM: 2813 Mb
Graphics Card: ATI Radeon 3100 Graphics, 256 Mb
Hard Drives: C: Total - 151125 MB, Free - 73608 MB;
Motherboard: ATI Corp., Ant3
Antivirus: AVG AntiVirus Free Edition 2015, Updated and Enabled

I am receiving on my laptop the following Error Messages: "The firmware has detected a CMOS Battery failure occurred. F1 Continue F2 To Setup." Also, "Windows Update_80072F8F and Windows Update_dt000." I am not able to get Windows Update to do the updates. My computer will shut down after attempting to run the updates. I then I choose Startup Repair to restore to an earlier time and after doing this several times my laptop will come up to my desktop screen. I am then able to sign on. My Date and Time on my computer is set back to 2008 when I purchased it. I will change the Date and Time to the current date and time I am in. This has been going on now for several times since 2008. Please advise on how I may be able to remedy these issues. Your assistance is appreciated. Thank You
vic0914
 

A:RE Error Messages

vic0914 said:


"The firmware has detected a CMOS Battery failure occurred. F1 Continue F2 To Setup."Click to expand...

Hi, first change the Cmos [Bios] battery and let us know if your other problems are solved.

How to replace the CMOS battery.
http://www.computerhope.com/issues/ch000239.htm
 

14 more replies
Answer Match 39.48%

Guys I wrote to you about three weeks ago about Pop up Error messages on the start up of Windows. The Error is still happening and now Ive lost the first blog I posted about three weeks ago.

the pop up where in the form od the following Error messages as posted in the pic Im reposting.

I remember lst time I spoke to some one about it and they sugested Hickjackthins and post the read out on here... but that was the last I herd anything...

could you please redirect me to my first Blog and some how show me how to get rid of these Messages Im getting on stateup of windows..

thank Kindly Barry Magann
 

A:Pop up Error Messages

Your previous post is here, you can find those by going into your account and clicking on the "Find all posts by BarryMagann link

I am not able to qualified to comment on your Hijack This log but you may want to look for any unknown/unused programs that may be associated with any of the above errors via msconfig and uncheck them from starting when you start windows. It could be a program that you no longer have installed is trying to run when you start Windows.
Start>Run>type in MSCONFIG>Startup tab - uncheck any program you don't want to run when you start Windows

For more info see the links below

Streamline your startups
http://www.pacs-portal.co.uk/startup_index.htm
http://www.answersthatwork.com/Tasklist_pages/tasklist.htm
http://www.windowsstartup.com/wso/index.php
http://www.3feetunder.com/krick/startup/list.html
http://www.greatis.com/appdata/
http://www.castlecops.com/StartupList.html
 

3 more replies
Answer Match 39.48%

I was trying to reinstall itunes and when it was beginning to install this message popped up, "error 1327 invalid drive :F/. Could someone please tell me what I need to do? I'm a computer novice so I need step by step instructions. Thanks

A:Error Messages

This link might help:http://help.lockergnome.com/windows/Error-...pict447642.html

1 more replies
Answer Match 39.48%

Hi, I've just build my first computer. When I installed windows XP pro two files were missing. These files were imsinsnt.dll and mfc42.dll. Now when I boot up the computer, windows XP loads and I get two error messages : "rundll32.exe Unable to locate component" - title "this application has failed to start becase frame dyn.dll was not found. Re-installing the application may fix this problem."-message. The second error message is: "Rundll"-title "error loading srclient.dll. The specified module could not be found." So my question is, how do I fix these error messages? Can I download the missing files from somewhere? Is this problem virus related? Thanks for any help.
 

A:Xp error messages

11 more replies
Answer Match 39.48%

everytime i log in i get this:
explorer.exe-application error
The instruction at *0x734301d5* referenced at *0x734301d5*. The memory could not be *read*
Click ok to terminate the program
Click on cancel to debug the program

and this:
The function you are trying to use cannot be accessed at this time. To fix this problem, please restart windows. Info number: 236

i believe the second one is related to icq because after i click ok icq comes on

how can i get rid of them?

thanks
 

More replies
Answer Match 39.48%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 6032 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 926979 MB, Free - 811995 MB; H: Total - 953197 MB, Free - 917206 MB;
Motherboard: LENOVO, MAHOBAY
Antivirus: AVG AntiVirus 2013, Updated and Enabled

Where can I find missing DLL's 27015.vbs and something called "open service" I get these when I boot up. Thanks in advance
 

A:error messages

13 more replies
Answer Match 39.48%

What causes the following error message?

Micro Visual C++ Runtime Library
Program C\Program Files\Internet Explorer\iexplore.exe

abnormal program termination
Upon clicking on OK, my DSL connection is lost and the screen returns to the screensaver
 

A:error messages

JFB , perhaps you need to upgrade ?
http://msdn.microsoft.com/visualc/productinfo/topten/upgrade.aspx
 

1 more replies
Answer Match 39.48%

When I go to driver guide.com and click to download something I come up with a message saying, "Error: documents.getElementsByTagName("title"){0}has no properties. What does this mean?

Lizameth
 

A:Error messages

JavaScript Error .. try downloading with a different browser
 

1 more replies
Answer Match 39.48%

I have a Linksys router and 2 wireless Linksys adaptor cards. The "wired" computer (the one with the router, adaptor card and cable modem) is an HP with Win XP. The wireless comp has a Win 98SE os. I continue to receive the following error message:
"There is a hardware conflict for IP address 192.168.1.101 with the system having hardware address 00:OF:66:6C:1B:IE" The "192" address I'm sure is me, the other is my wife's.
I have called Linksys tech support several times. They've attempted to come up with a solution, however I still get this message.
I've set-up the wireless network several times in an attempt to get this resolved, but still get this message. I tried running the hardware troubleshooter on my comp, but because one of Microsoft's "critical updates" messed that up, I can't even do that.
I've tried running various "troubleshooters" including Fix-It Utilities 6.0, but nothing shows up.
This is becoming increasingly annoying........
 

A:Error Messages

8 more replies
Answer Match 39.48%

Hi all, I am running Windows 7 and I.E. 8 and Chrome and have tried Firefox too and have the same problem.

Everytime I type, click a link, navigate to a new webpage etc I get the error 404 message. The irony of this is that a simple refresh on the page once the error 404 message has appeared then lets the page load as normal.

I cannot for the life of me think what is causing this, our network runs through a router with my PC and my sisters wireless laptop the only two connected devices.

Any ideas or help would be much appreciated, this is happening in all 3 browsers mentioned above.

Many Thanks
 

A:Error 404 messages

You might benefit from doing a search of TechSpot for the 404 error responses of the past.
 

4 more replies
Answer Match 39.48%

Hi there,

I started installing the latest internet explorer but stopped half way through. Now, whenever I use IE7 this error comes up:

the procedure entry point _resetstkoflw could not be located in the dynamic link library msvcrt.dll

followed by this

the procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll.

followed by this

Java(TM) platform SE binary has stopped working
Winkdows is checking for a solution to the problem.

and windows can never find a solution. Google Chrome is working fine, but whenever I do anything with IE7 all 3 error messages above come up in succession.

Can anyone help?!

Thanks a lot,

kat
 

A:IE7 error messages

In Control Panel go to Add/Remove programs, click on IE7, then click repair.
 

1 more replies
Answer Match 39.48%

Hi there,
I thought I would give this a shot! I having problems with tagged/hi5
2 things going on having problems with.


1. I get this message:
This content cannot be displayed in a frame
To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame.


2. I get this message when I try browsing friends :
Browse

1
2
Next »
GenderBoth Male Female

Age18192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899
to
1819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989999+


CountryAll Countries United States Australia Canada United Kingdom Aaland Islands Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bonaire, Sint Eustatius and Saba Bosnia and Herzegovina Botswana Bouvet Island Brazil British Indian Ocean Territory British Virgin Islands Brunei Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo (Brazzaville) Congo (Kinshasa) Cook Islands Costa Rica Cot... Read more

More replies
Answer Match 39.48%

When I want to download a program one or both of the following appear.

1.setup was unable to create the directory Error 5; Access is denied.

2.error; can't initialize plug-ins directory. please try again later.

A:error messages

is this with anything you download or just with a specific program. if a specific program what is it?

you can also try the first solution at the following

Error 5: Access Denied: Setup unable to create the directory - Microsoft Community

1 more replies
Answer Match 39.48%

I don't know if this is a security issue, so my apologies if I am in the wrong forum. Using my old laptop computer running Windows XP. In launching some programs, the launch begins and gets so far, then an error message appears. It says that 'Automation Server Can't Create Object' , Code:0, What do I need to do to correct this? Maggie:
 

A:Error Messages

Try this:

Click Start, click Run, type "regsvr32 shimgvw.dll" (without the quotes), and then click OK.
 

2 more replies
Answer Match 39.48%

Hi,

I recently tried to uninstall "TuneUp Utilities 2008" but halfway through the install I get the following error message (see web address below for screen shot of error message) and I can't uninstall the program. I have had this problem when trying to uninstall some other programs as well.

I have tried to reinstall windows installer but it said I was using service pack 3 so I had the latest version so I couldn't reinstall it?

Does any one know how I can resolve this?

Error message screen shot:-

 untitled.JPG   31.8KB
  31 downloads

A:Error Messages

Try booting into safe mode and try to uninstall the program, see if that works

Hope this helps,
Ttech

8 more replies
Answer Match 39.48%

Hi there,
I'm getting a few different error messages.

1. A box keeps coming up with "unresponsive script", it asks if i want to continue or stop script.
2. I was just trying to install an update of Adobe, it stopped & said error: 1601. It said i could either be in "safe mode" or the "installer not correctly installed"
3. When i'm on Mozilla, & trying to play on certain games, it says "gameloading error". My java & shockwave are all upto date, i checked them.

Can anyone explain all this to me & how can i put it right?

Thanx,
Nita
 

A:error messages

Read THIS.
 

1 more replies
Answer Match 39.48%

I was recently trying to format my external hard drive (my passport) to FAT32 in order to transfer files to my PS3. While I was trying to figure out which would be the best possible way to format the HD the volume I assigned drive letter that was still in a RAW partition state disappeared. I have a DISK1 of unallocated space, but it is not initialized. When I try to initialize it an error messages pops up reading "I/O device error" If anyone could be of assistance it would be extremely appreciated.

WoP
 

A:i/o error messages, help please!

That generally indicates a faulty drive. Bt you should also chack your connections.
 

2 more replies
Answer Match 39.48%

for the past few days i have been trying to restore my computer.. i am not able to do so because a few messages come up while doing so: R:\W2247.GHO and the other one is GHOSTERR.TXT.. i have NO idea what is going on and i was wondering if someone should PLEASE help me figure this out....
Thanks So Much
 

A:Error Messages

Welcome to TSG.

both error messages are related to Norton Ghost.

can you post more details? computer make/model, HOW do you restore your PC? using recovery discs or do you have norton ghost installed?
 

2 more replies
Answer Match 39.48%

Hi

Coupla weeks ago I got a virus on my computer. My antivirus software found it in a scan, but couldn't remove the files for me. On the advice of my antivirus company (Bullguard), I manually deleted the files (from windows/system32).

The virus is gone, but every time I log on to my computer, I get three RunDll error messages, saying "the specified module cannot be loaded" (or something like that). I get one message for each file I deleted.

Is there any way to get rid of these messages? It seems that some remnant of the virus is calling for the files to be opened, but then finding the files are absent. Or something.

Any ideas?

Thanks

- Webghod
 

A:Run DLL error messages

8 more replies
Answer Match 39.48%

Hi (windows xp)
I have recently had to have a new heatsink put in my computor, i lost some of my programmes, and had to have them reinstalled.....anyway all was ok, i reinstalled avg anti virus, and csw shreeder and they are both up dated, I keep getting mircrosoft error messages in grey boxes, loads of them, i know they are trying to get me to download loads of stuff i don't need, so i have been ignoring them.....how can i get rid of them, they are most annoying, any help would be great, before i chuck it out the window.....cheers sweets
 

A:error messages

9 more replies
Answer Match 39.48%

hello
i am a little new at all of this but i am needing assistance with someone that is maybe specialized in an area. i am working with winxp and i run windoc from systemworks and every other day i am getting many errors. i am also wondering if there is something fishy about an unknown user having access to a few programs or in the registry. that will help me. already have had wiped drive and re-installed a few times. thank you
justjesse2
 

A:[DUP] error messages

Hi.

Pleae don't post the same question twice.

I just reacted here: http://forums.techguy.org/showthread.php?s=&threadid=105260
 

1 more replies
Answer Match 39.48%

what do these mean?

xml Document must have a top level element
Line 0

and

Error loading
C:\Windows\Downloaded Program Files\bridge.dll

and how do I fix it.

I can't run highjack this because my cpu usage max's out and the program doesn't respond

Please help.
 

A:Error messages

7 more replies
Answer Match 39.48%

I just recently bought a new computer but to my annoyance it has already been driving me up the wall!!
I have 98 loaded up to one of my hard drives with only the basic installed nor sound drivers or display drivers and i tried to set up xp on my other hard drive. I keep getting so far before a blue error screen comes up first of all it was
acpi and when i fiddled with the bios that stopped then it was
0x00000050 which i tried to find out might have something to do with my memory(i have 512mb of new memory on one stick)so i cant take it out and play with it. Then i fiddled with the bios again and got 0x000000be it also said to disable all caching and shadowing i did what i could in the bios
is there any where else i could disable it? should I?
and i thought xp was straight forward can anyone help me this is my first time on a forum??
 

A:error messages

7 more replies
Answer Match 39.48%

Hi

Hope someone can help me. I posted these problems in another forum but was unable to get any answers. I have many pop-ups and many problems with error messages. My son unknowingly infected my computer with many viruses several days ago. My antivirus shows that there are no more on my computer and that they are quarantined but I am still having problems. My control panel is gone off the start menu and there is an error message when i click on certain programs "Restrictions This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator." The following is my hijack log. Please HELP

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:46:58 PM, on 9/7/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\COMMON~1\SYMANT~1\CCPD-LC\symlcsvc.exe
C:\Program Files\Symantec\LiveUpdate\AUPDATE.EXE
C:\Program Files\Symantec\LiveUpdate\LuComServer_3_4.EXE
C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe
C:\Program Files\Symantec\LiveUpdate\LuCallbac... Read more

A:Please Help....many error messages

I posted this last night and no response. I hope that there is someone out there who can help me... please reply if you can. Thanks in advance!
 

1 more replies
Answer Match 39.48%

Just recently upgraded to windows 10. Have two updates that won't installed. Hewlett Packard-Imaging, other hardware- null print- HP photosmart 7520 series error 0 80070490 and error 0 8024200b.

A:Error messages

There have been update/installation problems since public introduction of Windows10. Hopefully MS is working on them.

2 more replies
Answer Match 39.48%

Operating System: Windows Vista Home Edition SP2
Computer: Compaq Presario C500 Laptop
Problems: When my computer first starts up I get the following error messages:
"Error Loading C:\Windows\System\rqRIBusP.dll The specific module could not be found"
and
"Run Time Error '339' Componenet MSWINSCK.OCX or one of it's dependencies not correctly registered a file is missing or invalid" (which pops up 3x)
Also while using internet explorer I get many pop-ups, and some pages will not load.

Here is a copy of my HiJackThis Report:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:11:21 AM, on 8/28/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16711)
Boot mode: Normal
Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Java\jre1.6.0\bin\jusched.exe
C:\Program Files\HP\QuickPlay\QPService.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Hewlett-Packard\HP Health Check\HPHC_Scheduler.exe
C:\Windows\System32\hkcmd.exe
C:\Program Files\Common Files\aol\1189469449\ee\aolsoftware.exe
C:\Program Files\Adobe\Reader 8.0\Reader\reader_sl.exe
C:\Windows\System32\rundll32.exe
C:\Windows\... Read more

More replies
Answer Match 39.48%

When I log on my computer I am getting two errors. One of them is causing me not to be able to downlod some software I purchased. The error messages are Sockconv has cause a error in ESOCK2REG.DLL and I believe the other says Rundll has caused an error in NEWDOTNET2_109.DLL. I don't know what I need to do to correct these errors. I would greatly appreciate anyone who can help me with this problem.

Thank you
Youbettergogirl
 

A:Error Messages

7 more replies
Answer Match 39.48%

Keep getting error 403 messages
and the word java at the bottom,

If anyone can help me please.
 

A:Keep getting error 403 messages

Are you getting the error message in your web browser or is it coming up in some other program? Is thre anything else besides the word "java" in the message?

If you are getting the 403 error message using a web browser, it means that you do not have permission to access the particular contents of a given web server.
 

1 more replies
Answer Match 39.48%

Hi,

Since trying to install a Digital PC Camera onto my Dell Dimension PC I have been receiving the following error messages which make my machine unusable.
Please advise, thank you.

Blue Screen

The main part that I managed to make a note it stated:

STOP: 0x0000008E (0xC0000005, 0x8058057B, 0xA94F576C, 0x00000000)

Blue Screen

STOP: c000021a {Fatal System Error}

The Windows Logon Process system process terminated unexpectedly with a stat f 0xc0000005 (0x00000000, 0x00000000)

The system has been shut down

Application Error Message

Wmiprvse.exe Application Error

The instruction at ?0x7c9113c0? referenced memory at 0x000000

The memory could not be ?written?

Click OK to terminate the program

A:Error messages, please help.

if you are connecting it with USB port then try connecting with another USB port on your dell. else you can also check by connecting your camera on a different PC and see if its giving the same error. if not you might be having a hardware issue.



______________________________________________
Before God we are all equally wise - and equally foolish!!

10 more replies
Answer Match 39.48%

I have hp pavilioon a850y system with Windows XP. Right now I have 8 error messages on my computer but I am only going to to put 2 here for now. What can I do about these errors? Thanks for your help. I am only an intermediate user.

error 1:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_STACK_OVERFLOW (0xc00000fd) occurred at PC=0x7C90E8EE
Function=strchr+0xE1
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
Dynamic libraries:
0x00400000 - 0x0049C000 C:\Program Files\Internet Explorer\iexplore.exe
0x7C900000 - 0x7C9B2000 C:\WINDOWS\system32\ntdll.dll
0x7C800000 - 0x7C8F6000 C:\WINDOWS\system32\kernel32.dll
0x77DD0000 - 0x77E6B000 C:\WINDOWS\system32\ADVAPI32.dll
0x77E70000 - 0x77F02000 C:\WINDOWS\system32\RPCRT4.dll
0x77FE0000 - 0x77FF1000 C:\WINDOWS\system32\Secur32.dll
0x7E410000 - 0x7E4A1000 C:\WINDOWS\system32\USER32.dll
0x77F10000 - 0x77F59000 C:\WINDOWS\system32\GDI32.dll
0x77C10000 - 0x77C68000 C:\WINDOWS\system32\msvcrt.dll
0x77F60000 - 0x77FD6000 C:\WINDOWS\system32\SHLWAPI.dll
0x7C9C0000 - 0x7D1D7000 C:\WINDOWS\system32\SHELL32.dll
0x774E0000 - 0x7761D000 C:\WINDOWS\system32\ole32.dll
0x3DFD0000 - 0x3E1B8000 C:\WINDOWS\system32\iertutil.dll
0x78130000 - 0x78263000 C:\WINDOWS\system32\urlmon.dll
0x77120000 - 0x771AB000 C:\WINDOWS\system32\OLEAUT32.dll
0x5CB70000 - 0x5CB96000 C:\WINDOWS\system32\ShimEng.dll
0x71590000 - 0x71609000 C:\WINDOWS\AppPatch\AcLayers.DLL
0x769C0000 - 0x76A74000 C:\WINDOWS\sy... Read more

More replies
Answer Match 39.48%

Hello, All of the sudden I am getting alot of different errors from the blue screen to the illegal operation. Also when I go on my IE, I usually use firefox but sometimes I use the IE...When I do a search for a website and I click to be taken to the website I want it takes me to a completely different website. Here is my hijack this log and I do not have my antivirus working all the time but I do use avast. Thank you in advance...Logfile of HijackThis v1.99.1Scan saved at 5:03:40 PM, on 4/17/07Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\SPOOL32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\PROGRAM FILES\COMMON FILES\AOL\TOPSPEED\2.0\AOLTSMON.EXEC:\PROGRAM FILES\COMMON FILES\AOL\ACS\AOLACSD.EXEC:\PROGRAM FILES\COMMON FILES\AOL\TOPSPEED\2.0\AOLTPSPD.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\WINDOWS\SYSTEM\WMIEXE.EXEC:\PROGRAM FILES\MOZILLA FIREFOX\FIREFOX.EXEG:\HIJACKTHIS\HIJACKTHIS-1.EXER0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page = R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = O2 - BHO: SSVHelper Clas... Read more

A:Error Messages Etc...

Hello RheanunI do not have my antivirus working all the time but I do use avast. Before we start, you need to realize that you are missing one important program on that computer: An antivirus. This is somewhat suicidal in today's digital world.You need to install an antivirus program as soon as you can and run a complete scan of the computer. I recommend you download one of the following the free antivirus programs: Avast or AntiVir orAVG antivirus Never install more than one antivirus scanner or firewall on your system! Several together can give you problems and decrease the reliability of it seriously! * Download Dr.Web CureIt to the desktop: ftp://ftp.drweb.com/pub/drweb/cureit/drweb-cureit.exe Doubleclick the drweb-cureit.exe file and Allow to run the express scan This will scan the files currently running in memory and when something is found, click the yes button when it asks you if you want to cure it. This is only a short scan. Once the short scan has finished, mark the drives that you want to scan. Select all drives. A red dot shows which drives have been chosen. Click the green arrow at the right, and the scan will start. Click 'Yes to all' if it asks if you want to cure/move the file. When the scan has finished, look if you can click next icon next to the files found: If so, click it and then click the next icon right below and select Move incurable as you'll see in next image:

This will move it to the %userprofile%\DoctorWeb\quarantaine-fo... Read more

8 more replies
Answer Match 39.48%

whenever I submit online registration forms or online purchase
forms,a 500;100 server error message appears. how to rectify
it. I am using windows-xp pro version and a dial-up connection
thank you
 

A:error messages

Welcome to TSG vjayank.

I believe this is equivalent to a "page cannot be displayed" type of error.

Are you running a firewall, such as Norton Internet Security or ZoneAlarm? If so try turning it off and see if the error goes away.
 

1 more replies
Answer Match 39.48%

my daughters laptop won't even boot in any type of safe mode the error mess.

stop:0X0000007E (0x80000003, 0x805BA6EBC, 0xBA4CB2B8, 0xBA4CAFB4)

A:Error Messages

Post # 28 here has a 'fix' that has worked for a number of people with that issue;

http://www.techsupportforum.com/f10/...rk-422311.html

If you are uncomfortable doing this, print it out and get someone qualified to do it.

3 more replies
Answer Match 39.48%

I keep getting runtime error messages what do they mean? also get script errors which asks me if I want to debug but I dont know how?
 

A:Error Messages

themurf, Hi!

Open Internet Explorer and click on Tools> Internet Options> Advanced.
Make sure 'Disable script debugging' is checked, and 'Display a notification of every script error' is unchecked.

Maybe this will help.
 

1 more replies
Answer Match 39.48%

I'm was trying to install the latest version of itunes and I got this error msg. 1606 could not access network location %userprofile%/my pictures. I also got a similar one when I tried to open pics that my sister sent. This was said, "could no longer find the file C:/documents and setting/my name\local settings\temporary internet files\conten ten I E5\SOQX3HBH\MG_0785(1)JPG. I then tried to download the newest version of Kodak easyshare and I got this msg, "1606x53x2951053040x. Please help. I started to download something from McAfee that removes viruses, spyware, etc, but thought I would check here first. HELP!

A:Error Messages

Try one of these free, online scanners:Be advised that some of these scanners will pickup things in "quarantine" from other anti-virus programs - so review the results carefully:http://housecall.trendmicro.comhttp://www.pandasecurity.com/homeusers/solutions/activescan/http://www.kaspersky.com/virusscanner Scan Only - no removalhttp://www.bitdefender.com/scan8/ie.htmlhttp://support.f-secure.com/enu/home/ols.shtmlhttp://us.mcafee.com/root/mfs/default.asphttp://onlinescan.avast.com/http://ca.com/us/securityadvisor/virusinfo/scan.aspxhttp://www.eset.com/onlinescan/If you find that you're infected, you can get assistance over in the Am I Infected forum located here: http://www.bleepingcomputer.com/forums/f/103/am-i-infected-what-do-i-do/

1 more replies
Answer Match 39.48%

I cant see a screen when i click on internet.

A:error messages

Please elaborate . . does the screen go dark (like power loss), a blank or partial page loads, occurs always, sometimes, etc...

2 more replies
Answer Match 39.48%

How do I stop the error message: Most of the time when I close a window I get this message--The instruction at referenced memory @"0x62304390" The memory could not be "read".How do I make it stop appearing?

A:Error Messages

Hi and welcome,
Look through the fixes here:
http://forums.techguy.org/web-email/...ion-error.html
See if any apply to you. Too many to post, but it appears and IE add on issue. Let me know the results.

1 more replies
Answer Match 39.48%

--------------------------------------------------------------------------------

I have posted this elsewhere on your forum, but as I use Spyware Doctor, it could be relivant to this topic so I have posted it here too - sorry if any confusion is made by this

Right, well this might or might not be an IE problem, as its not the only program this is effected............. Basically, im getting an error literally every 20 mins, whether it be IE6, Windows Media, Roller Coaster Tycoon, Fruit Machine emulator....... basically any program im using, I am getting an error where the program has to terminate - when I click on the error information, its refering back to a text file (ive already researched this and its basically just writing to the file a log and is not the actual problem). Also from time to time, im using IE and all of a sudden, without notice of any errors, IE just closes itself down.

This is really annoying me this problem, as I have virus scanned and used Spyware Doctor to remove viruses and spyware etc, but I have still not found whats the do. I have Hijack This, if anyone can help me , or is willing to help me, id be very appriciative

Here is a few of the errors I have been getting......

AppName: mfme v9.4.exe AppVer: 0.0.0.0 ModName: kernel32.dll
ModVer: 5.1.2600.2945 Offset: 00012a5b

C:\DOCUME~1\scotty\LOCALS~1\Temp\2a05_appcompat.txt

AppName: mfme v9.4.exe AppVer: 0.0.0.0 ModName: mfme v9.4.exe
ModVer: 0.0.0.0 Offset: 001a1e5

AppName: mfme v9.4.exe Ap... Read more

More replies
Answer Match 39.48%

Hi,
Trying to download a small program file from this site: http://www.auctionsubmit.com/support.htm#download

I have had 2 separate copies of this software until yesterday. I use them to post auctions to eBay and since eBay has changed categories AGAIN... I was not able to update them this time. The software will not post auctions unless these are current so after NUMEROUS attempts I deleted the programs and would like to download new copy with updated categories already in place. I have downloaded from both site 1 and site 2 ( 2 times each) both to a "downloads" folder on my desktop and to the WUTemp folder on my C: drive. When I attempt to unzip the downloaded file I get the following error:
"file is not a valid winn32 application". I am at a loss as to what may be causing this???
I have noted a change in system performance lately but am unsure if it has anything to do with why I am getting this error. I have timed how long it takes to open a program from the shortcuts/desktop and even the "notepad" function. They can take up to 15 seconds to open. System is as follows:

Pentium-4 2.53 GHZ 533 BUS
M-Board P4-S5/DX+
Memory DDR 1024MB
Hard Drive 80GB UDMA-100 7200 RPM

While not the fanciest/fastest system out there... it should open programs quickly and did until a few weeks ago! Whatever is causing this is getting worse. Available memory is 771,804KB. I have almost nothing on the system. I do have Norton Internet and virus software but disabl... Read more

A:Error Messages!

Please download Hijackthis and post the log file.

HijackThis

MINz
 

3 more replies
Answer Match 39.48%

Hello...

My computer is acting funny. I am getting TONS and TONS of pop-ups...I can not even go to a web page without 10 at a time popping up. Also, I have different error messages.

Can anyone tell me how to do Hijack this and someone look at my log and then tell me if I have any viruses or anything on my pc that I need to delete?

THANK YOU!
 

A:Error messages, pop ups!!

16 more replies
Answer Match 39.48%

i had spyware and trojans. i think norton 360 removed them. however, is it possible that they corrupted some files? i now get error messages "windows/privacy_danger/index,htm" and rundll32.exe. system is extra slow and keeps freezing. white desktop that i cant change. do you think i still have the virus? or do you think i need to fix the files. i ran a free registry scan and fix. didnt help. Help. Im a computer dummy.
 

More replies
Answer Match 39.48%

Quote:




pccguide.exe - application error
> The instruction at "Oxoocfc438" referenced memory at "Oxabedabab". The
> memory could not be "read".






Quote:




HTTPmailWndClass: msimn.exe - application error
The instruction at "Oxa 100 1bc72" referenced memory at
"Ox0042000c". The memory could not be "read".
Click OK to terminate program
Click on cancel to debug the program




Among many others, this pops up and requires a reboot.


edit: before anyone even asks, this is NOT a dual boot OSX and XP machine.

A:can you help with error messages?

Quote:




Oxabedabab




this almost sounds R rated

did you install any recent progams?

if so, enter safe mode and remove them

schedule a disk check and reboot

3 more replies
Answer Match 39.48%

Trying to change display settings on a pc 1024x768 to 800x600

Right click desktop and i get these errors

"Run a DLL as an APP"

If i close this meesage i then get

"Run a DLL as an APP has encountered a problem and need to close"

If i try and change the settings in Control Panel by clicking on Display ...i get

" An exception occurred while trying to run
"c:\windows\system32\shell32.dll,Control_rundll
"c:\windows\system32\desk.cpl",display"
I really need to get this fixed. Can anyone help me please?????
 

A:Serious error messages on my pc

I managed to change the display using the properties that came with the graphics card!
 

1 more replies
Answer Match 39.48%

After xp start up on my computer I get two error messages :-

cannot find 'jtjhm.exe;
also cannot find 'fuobqfjikbj.exe;
I have tried to find them to delete in the run message box but no
good.Can some one out there please help me. Thanks.
 

A:error messages.

http://forums.techguy.org/t110854.html Go here and download the latest Hi Jack This Follow the tutorial , scan and paste the log here
 

1 more replies
Answer Match 39.48%

Services system 32 error messages

A:Error messages

Quote:





Originally Posted by osama


Services system 32 error messages




Hello,

Need more info.

Post the exact error messages.

When are you getting the error message.

1 more replies
Answer Match 39.48%

Hi,
This is my first post so I'm not sure I'm doing this right. My desktop PC will only operate in safe mode. When I attempt to boot normally, I get error messages that say "Internet explorer has experienced a problem and Will close" and "Windows Explorer has experienced a problem and will close". Please help.

A:Error Messages

We need more information please.

What op system? Windows XP? Home or Pro?

What has occurred with your computer recently? Have you added any hardware or software or changed anything?

What were you doing the last time you were in normal mode? Did you use msconfig?

Have you updated anything recently?

2 more replies
Answer Match 39.48%

Hello,
Every time I go on the internet I get the following message"An error has occured on this page"

Line 565.
object expected.
Code 0.
URL http://www.ntlworld.com/
Do you want to continue running scripts on this page Y/N.?

I have chosen both Yes and No but it makes no difference, the message still appears when I go on-line,can you help please?

[email protected]
 

A:error messages

6 more replies
Answer Match 39.48%

Dave,
When I said I had enabled script de-bugger I meant I had ticked that box,I have not ticked the notification box,the message is still there.
How does one contact the Webmaster? (I am new to computing, as you have probably guessed)
Thanks again for the help
Tom Power
 

A:error messages

Tom
Max has answered your question on previous thread.
http://forums.techguy.org/showthread.php?threadid=53582
Dave
 

1 more replies
Answer Match 39.48%

In a previous request for help I said that I was getting the following message on going on-line"An error has occurred on this page.
Line 565.
Char 1.
Code 0.
Error object expected.
URL http://www.nbtlworld.com/
Do you want to continue running scripts on this page?

In response to helpful suggestions I carried out the following,
I enabled 'script de-bugging' and disabled 'display notification about every script error' and re-booted but the message still appears.
I am told that only the Webmaster can do anything about this,how do I contact him?

Again, thanks for previous help.
Tom Power
 

A:Error messages

Tom
If I read your post correctly
by enabling script debugging it will alert you to all script errors it comes across.
Make sure you have a check in Disable script debugging and make sure there is not a check in the notification box.
Click apply and restart.
Also to ultimately fix the error from the webpage you are viewing is the responsibility of the webmaster.
Dave
 

3 more replies
Answer Match 39.48%

i was on the internet checkin my phone bill on the Virgin Media website when suddenly the conection got disconected. When I reconnected and tred to go to my Documents of when I click on my computer or try to go to control pannel a message comes up saying 'class not registered'

When I click on control Panel this is what is displayed
C;\Windows\System32\ExplorerFrame.dll is either not designed to run on Windows or it contains an error'
When I click on my Documents this is what is displayed

C\users\Kay\Documentsi
Class not registered.

am am unable to go in my documents or into Control Panel

A:error messages

I recommend a system restore. Go to Start, type System, then click on System Restore (hopefully it comes up...). Follow the instructions to restore your system back to how it was a day or two ago. If that doesn't work then try this:

Click Start and type cmd into the search box, press Enter. Up pops the command prompt. Type in regsvr32 C:\Windows\System32\ExplorerFrame.dll and press enter. You might have to reboot; I'd do it anyway.

If that still doesn't fix the problem, I just found this patch from Microsoft:
Error message when you try to start Internet Explorer 7 in Windows Vista: "You must be an administrator to open Internet Explorer on this desktop"
It's not directly linked to your problem but I found someone who this patch had worked for.

Hope that helps

1 more replies
Answer Match 39.48%

I keep receiving error messages when I'm online. I've read other posts and ran HijackThis. Here's the list from its scan:

Logfile of HijackThis v1.96.1
Scan saved at 9:28:29 AM, on 8/21/2003
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Softex\OmniPass\Omniserv.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\WINDOWS\Explorer.EXE
C:\windows\system\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\Unload\hpqcmon.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\WildTangent\Apps\GameChannel.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\ALCXMNTR.EXE
C:\Program Files\MUSICMATCH\MUSICMATCH Jukebox\mmtask.exe
C:\WINDOWS\System32\rundll32.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpobnz08.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hposol08.exe
C:\Program Files\interMute\SpamSubtract\SpamSubtract.exe
c:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnf.exe
C:\Program Files\Inter... Read more

A:Can I get any more error messages?

7 more replies
Answer Match 39.48%

Can someone advise as to where I should specifically post a request for information regarding an Internet Expoler error message I am receiving?

Thanks.

Mike Fichtner

P.S. The message basically tells me that Internet Explorer has encountered a problem and will close, and offers a "send eror report" box. I then may get another message that an instruction at "0x01axxxe" referenced memory at "0x01dxexxx". The memory could not be read.

These errors appear when I close an on-line session with my Comcast service.
 

A:IE error messages?

Checkout: http://www.microsoft.com/windows/ie/community/columns/ietopten.mspx

Good luck.
 

3 more replies
Answer Match 39.48%

on my sony viao.(windows 7) i keep recieving dll error message when i run certain programs. i am also unable to change users or create new ones.
 

A:dll error messages

H! Have you tried sfc /scannow??
 

2 more replies
Answer Match 39.48%

please help me, everytime i log into my account on windows xp 5 different error messages come up when ive logged in. they each say a different error and there are 5 all together :
installhelper.exe
oscheck.exe
reader_sl.exe
ccapp.exe
cameraAssistant.exe
if you could tell me how to fix this and why it occurs please say and if you dont understand the question then do ask

A:Error Messages

Two of those are related to Logitech.
One is related to Adobe reader.
The other two relate to Symantec/Norton

Are you having any problems with those programs? Have you recently uninstalled one or more?

6 more replies
Answer Match 39.48%

Lately out of nowhere ive been recieveing error messages when i close internet explorer. When i close it first i get an error report screen. If i either send the error report or dont send i get the following message. "An error has occured in Internet Explorer. Internet Explorer will now close. If you continue to experience problems please restart your computer." When i click on ok sometimes i recieve this message after that. "The instruction at "0x01e21f99" refrenced memory at 0x01e21f99". The memory could not be "read". Clock on ok to terminate the program" Now after this i restart my computer but for some reason that doesnt work either

Microsoft Windows XP Professional SP2
Intel(R)
Pentium(R) 4 CPU 2.66GHz
512 MB RAM
 

A:IE error messages

and don't double post. requesting that this thread be closed.
 

2 more replies