Tech Problem Aggregator

Gave remote access Now I have probs

Q: Gave remote access Now I have probs

I went to Symantecs web site for tech support on my virus product and they asked for remote access for my computer and I allowed it. Well it took them 2 hours to fix a 45 minute problem. The person wasnt paying attention to me and I did most of the work fixing my problem and so when the company sent out the survey on tech support I complained and gave out the persons name. Ever since then My computer has lost the cd rom in which i finally got back and then it lost the scanner and I am working on recovering its drivers and such. Now when I email people it take forever to type a line and every time i turn on MSN messenger I have to type in my info even after I have clicked save all information. I have attached my hijack log. and I am aware of silentbug, i have it to watch my childrens activities online lol

More replies
Answer Match 81.48%

Hello.  This account is being used by two people: the PC owner and a neighbor who is trying to help.  The PC owner had a cold call at the beginning of September which claimed to be able to tell that the PC owner was sending infected files.  A week later, the neighbor heard about this and recognized this as a tech support scam.  The neighbor was able to determine that the tech support scammer had installed the free version of AVG AntiVirus, but not much else. 
 
The neighbor attempted to run a few free tools to find out if any malicious software was left behind, but due to problems with saving the logs or virus scanners apparently crashing, the neighbor and the PC owner never found any conclusive results for most of those.  The neighbor was following some advice given on a different forum to the victim of a similar scam (link), so dds logs have already been created, but the neighbor would rather have someone who understands them take a look at them. 
 
The neighbor also ran TDSSKiller, but set to Verify Driver Digital Signature and Detect TDLFS file system.  No actions were taken to remove anything using this tool, but a TDSS file system was detected; we don't know what is on it, yet.
 
The scammers apparently used TeamViewer to access the PC owner's computer, and maybe LogMeIn Rescue.  An empty folder was left for LogMeIn Rescue, but program files remained for TeamViewer.  The neighbor copied... Read more

A:Gave remote access, might have malware.

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-Malware Please download Malwarebytes Anti-Malwareand save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan" option is selected.Then click o... Read more

5 more replies
Answer Match 81.48%

Boy do I feel stupid, I was having trouble with figuring out my new outlook email. I got frustrated looking online for information and called what I thought was a Microsoft tech help ctr. The person on the phone told me she would connect me with a tech. thru a chat window at chat123.us. I proceeded to follow prompts and began chat with the tech. the tech stated I was probably infected with third party spyware and my email was hacked.During the process the tech asked to check some things. she pulled up a command prompt window and started looking at my ip address, she also got my start-up window open. When done she said I was infected and showed me where. She said she could fix for a fee. Already suspicious I declined and logged off. I ran my avira free antivirus and it came up clean and my computer seems to be ok but I fear I may have compromized my system. What now?
Thank you, Jim

A:I gave someone remote access, am I infected?

From what I've read online that chat123.us uses LogMeIn Rescue to remotely connect to your
computer.
 
Link to LogMeIn: How LogMeIn Rescue Works: Remote Computer Support Solution | LogMeIn Rescue
 
QUOTE: With the customer's permission, this small .exe file automatically downloads to the remote PC. It's the interface through which technicians communicate with Customers and conduct remote support. The applet automatically removes itself from the remote PC at session conclusion.
The applet provides remote Customers with:
Interactive Chat and detailed Session History
Prompts to permit or deny technician access to all functions
File Transfer to the technician
Ability to stop Remote Control or disconnect at any time
You could do a search for LogMeIn on your computer to verify that it is no longer installed.

3 more replies
Answer Match 80.22%

Hello.  We posted in the Am I Infected? forum previously in this topic.  To recap, there are two people using this account, the PC owner and a neighbor helping out.  The PC owner gave remote access to someone running a tech support scam, the neighbor has been trying to do some scans to figure out what (if any) malicious software may have been left behind and remove it.  One of the performed scans was with TDSSKiller and after we posted the log we were directed to make a topic here.  Logs are still posted in the other topic, but DDS logs were created previously which have not been posted.  We also just ran DDS again, to give you fresher logs to look at, should that make a difference after running SUPERAntiSpyware.  SUPERAntiSpyware found only found tracking cookies, which have been removed.
 
GMER was also suggested by the previous helper, but we have been unable to reach the website to download it, either on the owner's PC or on the neighbor's.   We did not run Malwarebytes AntiMalware a 3rd time (the 2nd time had no detections, the 1st time had maybe 2, but the log wasn't saved before the neighbor could view it).  The other scans which have been attempted were with Microsoft Security Essentials (which found nothing) and an online ESET scan which crashed before its results could be viewed.
 
Here is the newest set of DDS logs.
DDS.txt
 
DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.... Read more

A:Gave remote access, have a TDSS rootkit, at least.

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.   Scan with Malwarebytes Anti-RootkitPlease download Malwarebytes Anti-Rootkit from here Malwarebytes : Malwarebytes Anti-Rootkit and save it to your desktop.Be sure to print out and follow the instructions provided on that same page.Caution: This is a beta version so please be sur... Read more

22 more replies
Answer Match 78.54%

Hello,
 
My father saw a pop-up that said his computer had an error and was infected with malware.  The pop-up had a phone number to call.  He talked to someone who said he was a certified Microsoft technician and got my dad scared about the Zeus virus.  My dad gave him access to his computer and they did a remote session.
 
The person did not ask for a credit card number, he asked to be mailed a check but wasn't too worried about getting paid. 
 
I know that my dad should not have done what he did  But now I'm trying to clean the computer from what may be compromised.  I am currently running SpyHunter and it has already found 217 threats detected.  It looks like the scary one is HawkEye keylogger and there is also Conduit Search/Toolbar and FindYourMaps Toolbar.  I'm 70% done.  
 
I'd love to know what to do next and if someone could please walk me through all the things I need to make sure and take care of to keep my dad safe.  Thank you for your help and support!

More replies
Answer Match 78.54%

I got a pop up that was loud and wouldn't let me close it saying, "your computer has been infected call Microsoft" and I did because I turned it off and it was still yelling st me when I turned it back on. I gave the tech remote access and he said I had a tiny something trojan virus. Well I didn't fall for paying, got off the phone, held power button down and turned computer off. Am able to use it fine now with no more warning but am I safe after giving the remote access? I was on the phone for about 30 mins while he was going around to different areas in my computer telling me what all of the "problems" were.

A:Gave remote access to a "Microsoft tech support" am I safe?

It wasn't Microsoft, it was a scam.   I suggest you have a look here and create a new post asking for assistance to ensure your computer has not been compromised .

1 more replies
Answer Match 70.56%

I have a 2003 server located in a main office, and have 2 external XP sites that log into the server via Remote Desktop/term serv to access one rarely used application(hence the use of RD & not a VPN)

My problem is this...User in location A, has a system with both a network printer and a LPT printer. Both can print from within the application via RD with no worries. User in location B however, can do everything else ok but cannot print to either a LPT printer or a network printer from within the app. I have tried logging in with User A's login at location B and still have the same issue. Which I assume means it is not a group policy or security setting on the server, rather an issue with the actual PC at location B?? I have checked the local resources tab in the intial Remote Desktop connection screen, and the "use local printer" option is checked. Any ideas would be greatly appreciated!

Thanks.
 

A:Remote Access Printer/Network Probs

10 more replies
Answer Match 56.28%

Howdy,

I need to set up my Win7 desktop so I can access it (and my home cloud) from the road with my Win7 Laptop. Should be pretty simple...except, the Remote Access Functions DO NOT APPEAR on the [System Properties] pop-up on the [Remote] Tab

See pic attached..

Cannot fill in the form, if the form ain't there.

Heeeep, please.
 

A:Remote Access: SystemProp>Remote>NO Remote Functions Visible

What version of Windows 7 is installed on your computer?


 

9 more replies
Answer Match 54.6%

ok i have windows 7 home premium running on an HP laptop, and Vista home premium running on a dell desktop. I keep trying to run the remote desktop connection to setup the laptop to remotely log on to my desktop when i am out of tow working, but it wont connect. i have the laptop with win7 hp set to auto detect RD server gateway, and the desktop with vista hp to auto detect TS server gateway??? Can someone give me a step by step method to complete this task???

A:Remote Desktop probs...

Welcome!

Unfortunately, the home versions do not support being an RD host. They can only connect to a machine running Professional or higher.

There is good news, however! There are free programs you can use instead. Try Teamviewer.

Hope this helps,
~JK

1 more replies
Answer Match 54.18%

Updated PCs running Trend Micro's Antivirus on Windows can be hijacked, infected with malware, or wiped clean by any website, thanks to a vulnerability in the security software.
The design blunders were discovered by Google Project Zero bod Tavis Ormandy. A patch is now available to address the remote-code execution flaw, so Trend Micro users should update their software as soon as possible.
Ormandy, who has been auditing widely used security packages, analyzed a component in Trend's AV software dubbed the Password Manager. He found that multiple HTTP RPC ports for handling API requests were accessible.
"It took about 30 seconds to spot one that permits arbitrary command execution, openUrlInDefaultBrowser, which eventually maps to ShellExecute()," he wrote in a bug report to Trend.
This means that any webpage visited by a victim could run a script that uses Trend Micro's AV to run commands directly on the machine – such as RD C:\ /S /Q to wipe the system drive, or commands to download and install malware. As another example, this code uninstalls Trend Micro's security software on a PC without the owner's knowledge or consent.
 

Article
 
The software has been patched via an update but I am surprised Trend Micro let this get through.

A:Trend Micro AV gave any website command-line access to Windows PCs

Not surprised of this at all. Hell, they don't even include signature based detections for Cryptoware if you're not on the latest version of their product and they don't warn you at all about it. It's when you directly ask them that they finally answer. Seriously, TrendMicro isn't worth using at all, at home like at work.

2 more replies
Answer Match 53.76%

hey guys i need help with 2 problems.

My Internet Navigator Keyboard's F Keys are set on default to do certain things like : new;reply;forward;send;undo;redo;print;save.. ect. I can modify these keys. For example modifying F1 to My Documents. The problem is I can't modify the key F1 to F1. When I play games to take a screenshot is normally F5. But when i press F5 it goes to My Music..
In the Keystroke section I can't put and F key. When I press F1 nothing happens.


And my other problem is with my Remote Wonder II that came with my ATI x800 All-in-Wonder. The remote wonder's software doesn't load on start up and DOES NOT show on system tray(bottom right hand corner). So I cant use my remote. Even if i launch the remote wonder program I cannot use the remote wonder because it still doesn't show on my system tray.

 

A:probs. w/ Logitech F keys & ATI remote wonder II

Try this:
http://webpages.charter.net/krumsick/
I haven't used it myself but it sounds good.
 

2 more replies
Answer Match 52.08%

The title says it all! Basically I have a comp running XP pro and I want to be able to work locally on one user account, with some kind of remote access server running on another XP user account so that the remote account and the local account can be used simultaniously. I know that this cannot be done with XP Pro remote desktop and could be by Windows Server 2003 remote desktop, but i need an alternate solution to make this happen.

Thanks!

-Jeff
 

A:Alternate Remote Desktop application for Simultanious Local/Remote Access

7 more replies
Answer Match 52.08%

I have a home network of 4 Win 7 computers which I leave running when I'm away from home to provide data to my website, among other things. In the past, I've been using Remote Desktop to access my home computers. It works very well, but it's always a challenge getting everything set up to work right before I go. I was wondering if others who have used Remote Desktop as well as other means of remote access would care to share their experience and express a preference, if any.

Thanks.

A:Care to recommend a remote access method beside Remote Desktop?

Everyone seems to like > TeamViewer - Free Remote Control, Remote Access & Online Meetings

9 more replies
Answer Match 52.08%

I asked a question in another thread wanting to know if there were any good free alternatives to programs PCAnywhere or GoToMyPC. Boy did I ever get more than I expected in TeamViewer that EAFiedler suggested.

Now I have a technical question about how TeamViewer works. It connects to remote systems across the internet not by an IP number that I enter but rather by an arbitrary nine-digit number assigned to the system when the program is set up. It connects so quickly that I know it cannot be scanning every IP address on the 'net looking for a TeamViewer connection at every one of them. So, I have deduced that there must be a server out there somewhere that stores TeamViewer information.

Does anyone know enough about this to confirm this and/or explain it to me somewhat?

Next question: What about security? Are there any security issues I should be concerned about, other than the obvious, of course?
 

A:Technical question about TeamViewer remote access/remote office

14 more replies
Answer Match 51.66%

This morning, I heard a nationally syndicated computer expert state that some Chinese hackers were "getting into" Windows based computers through "Remote Access/Remote Desktop" even if the service is turned off. According to the guru, "They will turn it on for you."
Being very concrete, as well as, somewhat dull concerning computers, I find this hard to believe. Could someone, in layman's terms, tell me the circumstances needed that would allow a hacker to take control of someone's system when a necessary service is turned off ??

A:Infection Of Windows Through Remote Access/Remote Desktop

Easy to do and best NOT described here.

5 more replies
Answer Match 51.66%

I am running a wireless Network with D-Link 714P+ Router. My PC is wired to the Router, with 2 other computers running wireless. I am running XP Pro.

When accessing my PC (or at least attempting to) from a remote Computer using Remote Desktop, I think I have to add something after the IP Address when typing in the Computer Name/IP Address. I have RD working successfully within my Network. Can someone clarify what I need to do here to access my PC through the Internet then Network

(Even though I have got this far with setting up my network, please go easy on me with the computer lingo)
 

A:Solved: How do I access my PC in a network using Remote Desktop from remote PC

10 more replies
Answer Match 50.4%

Hello All

I have a windows server 2008 and I want to install Remote Access/VPN role on it. Unfortunately there is confilict between Remote Desktop and VPN Server role in Windows Server and when enable VPN Server role, Remote Desktop is disabled and vice versa unless you have 2 NICs and enable each on separate NIC.

Do you know a way to keep both enabled and functional on the same NIC.

Any help is appreciated.
 

More replies
Answer Match 47.88%

Hiya

This step-by-step guide describes how to configure remote access policies through the Routing and Remote Access snap-in when Routing and Remote Access is configured to use a Windows authentication provider and through the Internet Authentication Service (IAS) snap-in when Routing and Remote Access is configured to use a Remote Authentication Dial-In User Service (RADIUS) authentication provider. This guide offers only step-by-step procedures for configuring remote access policies, not strategies for implementing remote access connectivity. It is intended for administrators who have experience managing the remote access features of Microsoft® Windows Server™ 2003 operating systems.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...0a-0c64-49e3-a6d8-dd6309111fca&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 47.04%

ok, yesterday had a few probs with router all now restored and been restarted only now i cant access any microsoft websites including msn and my hotmail account-everywhere else on the web is fine, its just anythin Gates oriented that it doesnt wanna know about (cant say i blame it really).....is this me or them and any ideas what i cn do about it? I can get in messenger ok, no probs an other people i spoke to on messenger could get in their hotmail accounts via there but whatever way i try it does NOT want to know-cant even open msn homepage at all
 

A:MSN/microsoft web access probs

8 more replies
Answer Match 46.62%

Weeks ago I set this up using crossover cable, 2 LAN cards on PC1 and 1LAN card on PC2. They are in the same workgroup.

I had posted a thread for help, can't seem to find it now, so posting again. Sorry.

Everything works great except PC1 can't access PC2, permission denied! both are XP SP2. PC2 can see the PC1 shared files, can print from PC1 printer, use the internet etc. PC1 (my gaming rig and the master PC) cannot access my old computer, where I left all my music files. At first I thought it was just a few tweaks in Windows and I'd solve it. But after several hours on PC2 trying everything I could think of, I'm stumped!! :knock:

I'm Admin on both PCs, I've set shared folders on both. PC1 can see PC2 icon in My Network Places, but when try to access get "permission denied, contact your IT admin" Of course that's me. So I've contacted me and me can figure out how this works!

Please help.!!!
 

A:Probs with ICS home network, PC1 can't access PC2.

create a user accoutn on pc2(right click my computer, manage, users and groups) using the login name and password you use on PC1 and give full admin rights make sure both in same workgroup, share all the neccary resources on pc2 and you should be fine
 

4 more replies
Answer Match 46.62%

I have a total of six computers on my home network. Four (two wired, two wireless) run XP, two (both wired) run Win 7. I have a new D-link DIR615 router replacing an older Linksys with which I had the same problems.

All of the XP machines connect with each other and share files to all drives perfectly. All six machines connect and share files with the secondary drives but NOT the C drives of the Win 7 machines. I can't get the Win 7 machines to see each other in the homegroup.

Each 7 machine says that it's joined to a homegroup, but that there's no other computer in the homegroup. Both are on.

Passwords are the same and I have password access disabled anyway.

All permissions I can find are enabled.

Network discovery is enabled.

All sharing is enabled, including all settings I could find for the C drives of the Win 7 machines.

One thing I found is that IPv6 shows "No internet connectivity" on both 7 machines. IPv4 shows internet connectivity. I really don't know what that means.

I've tried everything I've found on every tutorial I've found and can't make this work. Any help would be very much appreciated.

Thanks in advance.

A:Homegroup probs, can't access C on Win 7 comps.

Homegroups is not made to work in a mixed Op system network, it's only made to function correctly with all Windows 7 machines. You need to set up a Workgroup for a mixed Op system network.

IPv6 only connects on the LAN and is used locally for the Homegroup network. That is why it says disconnected which is in reference to the WAN.

You should leave the Homegroup on all of the Windows 7 machines and create a Workgroup.
Homegroup - Leave

Networking home computers running different versions of Windows

Sharing files and printers with different versions of Windows - Help & How-to - Microsoft Windows

7 more replies
Answer Match 46.62%

i have two computers networked to each other with one accessing broadband. i can get internet on computer 1 but no email services. comp1------comp2-----------broadband.

A:Network And Internety Access Probs.

Is this issue resolved?

1 more replies
Answer Match 46.62%

.

.. hello helpful people ...
.. I am trying to install MS Access 97 on to my machine at work .. and it won't install because of an ODBC problem. There is a problem at the end of the installation .. -- The config. of the ODBC Microsoft Access Driver (*.mdb) driver failed.

.. I've tried to configure the ODBC settings myself and can't even create new ones .. it says,

-=-=-=-
-- The setup routines for Microsoft Access Driver (*.mdb) ODBC driver could not be loaded due to system error code 1157.
-=-=-=-

.. after clicking the above warning .. it says,

-=-=-=-
-- could not load the setup or translator library
-=-=-=-
.. I've tried so much already ... installing most recent MDAC files from Microsoft .. I've used several different copies of MS Access.

.. installed MDAC (v.2.6) ... and tried installing MS Access 97 again .. same error :

-- configuration of ODBC driver failed.

.--.--.--.--.--.--.--.

.. my settings for Microsoft Access Driver (*.mdb) seem to be correct (files that are stated are in correct location).

.. but I have another folder in ODBCINST.INI .. and it is the only one that has files in a different location.

-- Client Access ODBC Driver (32-bit):

DRIVER = "C:\sqllib\bin\db2cli.dll"
SETUP = "C:\sqllib\bin\db2odbc.dll"

* neither of these files exist on my machine .. neither do the folders for that matter ... thinking I should create such files and folders .. or change the path of.

(feelin... Read more

A:.. MS Access 97 .. ODBC inst. probs.

A search for that error message came up with a few answers on on Google, though (predictably) zero on MS. At least you can know that you are not alone.

You might go and make sure you have the "right" version of MDAC. (There are many to choose from, god bless 'em.)

Several of the other sites mention using 2.5SP1 to resolve the problem, for what it's worth. I'd just keep trying MDAC versions until something clicks.

Or wait for someone who's seen this baby before to come around.
 

1 more replies
Answer Match 46.2%

Before updating to windows 7 from XP, remote access was working. Now enableing remote terminal access, we get access denied. The pc trying to gain access are a Vista and 7. The pc being accessed is using a sticky IP. We have been accessing for sometime until upgrade.
This is between 2 cities. NLR has sticky IP and is to be accessed, Searcy had dynamic, class C.

Thanks in advance for your help.
Jack Privitt
 

A:Windows 7 remote access into, access denied

16 more replies
Answer Match 46.2%

What is the best way to copy files, folders, subfolders, and not have access or ownership problems.

I want to copy my entire pictures folder to an external drive to be used by another machine and I'd like to avoid any access denied or ownership problems.

Thanks

A:How copy files to be used on another machine & not have access probs

Create a folder on your ext drive called eg. "My shared pics" then just copy what you need to this folder and you shouldn't have any permission problems

3 more replies
Answer Match 45.36%

Hi,Perhaps someone might be able to help. I am running Windows Vista. My wife uses IE, whilst I use Firefox. We've had no problems for several months. Recently, IE has started to give her some issues with some error that says IE is no longer working and resets itself, much to her displeasure. On the PC I use Firefox and have never had any issues. Mainly, I use a laptop hooked up to our secure wireless network, and again, no issues (outside of her IE problem, which I have tried to resolve).Today, she says that the machine was running slow, and couldnt access several websites that we normally view all the time. One of which is a local newspaper (www.brisbanetimes.com.au) where it would time out. She said other sites did it as well, but not all of them.I had a look when I got home, and did have this problem. The weird thing is that it was also affecting my laptop over the wireless, so perhaps not a system error?Anyway, I ran a slew of programs.. AdAware which found some spyware which was removed. Spybot found nothing, AVG found some spyware, Bit Defender found nothing, and Stinger found nothing.Websites still dont work.Any suggestions? Please?Here is the HiJackThis results just in case.Regards,SamLogfile of Trend Micro HijackThis v2.0.2Scan saved at 8:21:19 PM, on 18/08/2008Platform: Windows Vista (WinNT 6.00.1904)MSIE: Internet Explorer v7.00 (7.00.6000.16711)Boot mode: NormalRunning processes:C:\Windows\system32\Dwm.exeC:\Windows\Explorer.... Read more

A:Website Access Not Working - No Probs Found -i Have No Bleeping Idea!

Hello SammySamSamWelcome to BleepingComputer ========================Download random's system information tool (RSIT) by random/random from here and save it to your desktop.Double click on RSIT.exe to run RSIT.Click Continue at the disclaimer screen.Once it has finished, two logs will open. Please post the contents of both log.txt (<<will be maximized) and info.txt (<<will be minimized)

1 more replies
Answer Match 45.36%

Hi all,

I'm trying to get a wireless router working for friends. I got it to work yesterday, but now it is no longer working.

My setup:
Fiber optic connection, HAG
Conitech wireless router access point (can find very little info on this)
PC XP pro sp3

If I connect my computer to the HAG, it, of course, works fine.

Yesterday, I hit the reset button on the back of the conitech router (because they didn't have the password) and went through the setup wizard, connecting my HAG to the WAN port on the router and it worked fine, both connecting via wireless and with a cable to one of the LAN ports on the router.

Today it is no longer working. Both wireless and LAN show it is connected but I can't access the internet.

Any ideas on this? I'm guessing you'll need me to post ipconfig /all but I'm not sure if I should do it with my computer connected to the HAG and working, or connected to the conitech router. Let me know and I will paste.

Thanks!
 

A:probs w/wireless router, was working, now shows connected but can't access web

8 more replies
Answer Match 44.52%

yo,
i've recently got broadband (bt) installed. my modem is a zyxel prestige 623. when it's installed either by ethernet or usb i can acces internet fine. the prob is i can't when i try and hit the net through the modem via a 3com oc wireless dsl router. i can setup the wireless router fine (i can see my/other pcs in the network accessing it etc etc). some info: my connection to the isp is pppoe. i've set up the ip address of the modem at 192.168.1.24 (previously was 192.168.1.1), the wireless router is 192.168.1.1 both have dhcp enabled. i heard something about havin to use a cross over patch cable between the router and modem. not sure if this is true but i've tried with with both types of patch cable to no avail. can't find anywhere to set default gateway on router if i even need to. is there any settings that spring to mind when setting up this sort of config?????????

cheerzz
 

A:Probs setting up 3com oc wireles router with my modem to access rnet

If you have the modem in router mode then:
Plug the modem into one of the local ports of the router.
Only enable the DHCP server on the modem.

If the modem is in bridge mode then set up the DSL connection in the router WAN configuration. Enable DHCP on the router.
 

2 more replies
Answer Match 44.52%

If I was to set up a VPN between my home computer and the office computer, could the user at the office still use their computer as normal while I was accessing it? I would only need to use the one program on her computer but she may need to use that program as well? Will this work?

Thanks
Julie
 

A:VPN access and remote access at the same time

I assume your Office Computer is XP Pro.
Now I do believe there is a hack out there to allow a Remote session and local session to use the Desktop at the same time. Do this at your own risk.

http://www.golod.com/2005/10/enabli...p-professional-and-media-center-edition-2005/
 

2 more replies
Answer Match 44.52%

Hey all,

trying to set up our system so that we cna do remote mmc administration of some machines (win 7).

when I connect to it, I get access denied errors for specific modules, however I can connect to Computer management, but the same modules still disallow access. I am using the domain admin to try this.

any reasons why it may not work?
 

More replies
Answer Match 43.26%

Hi everyone. I have a friend that has downloaded a rogue anti-virus program and I would like to help her remotely. Our OS are Windows 7. My concern is will the virus latch on to my PC? Any help will be appreciated. deanie44

A:Remote Access

It's possible. But, if you know the name of the virus/trojan and you read up on it and take precautions (antivirus/antitrojan software running and up to date) you should be relatively safe.

2 more replies
Answer Match 43.26%

Hi

Im interested to know your opinions on remote access software. We are in the process of investing in a new supplier and as part of our research we're hoping to learn from your experiences.

Please comment on all aspects of the software you have experience of... such as connectivity, speed, limitations, problems, level of support provided, etc etc.

Your input on this will be appreciated...!

Aj.
 

A:Remote Access

8 more replies
Answer Match 43.26%

Hi,
I want to access my work data remotely.

My work is on ADSL with 4 computers on a workgroup. DHCP server automatic 192.168.0.100 (PC1) ... 192.168.0.103 (PC4)

My home setup is almost exactly the same, with a different workgroup name and different computer names.

I have managed to remotely connect over the workgroup by entering the PC name at home and of the ip address assigned by my router (192.168.x.y). I was wondering if I could connect from one computer on my home network to another one over the internet back to the same network by entering an IP address not of the 192.168.0.x

Now I realise this is probably not possible because I am trying to contact the same IP address provided by my ISP and it is probably asking for a connection while it is trying to recieve one. So I guess I am interested in how I can connect from one computer at home to a particular computer at work with the above setups.
 

A:Remote Access XP Pro

Almost right.... What you need to do is the following.

Take your PC's and assign Static IP's (you'll see why in the next steps)
Go to your Router and forward port 3389 to the PC you want to remote control into.
Then you connect to your PC using your WAN IP or if you have a dynamic WAN IP you may want to use something like dyndns.com to give you a stable connection method.

If you want to put more machines to be remote controlled remotely do the following -
Take your PC's and assign Static IP's (different last octet from the one above)
Also on the specific PC edit the registry and go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber edit it and change the port from 3389 to another port.
Go to your Router and forward the port you picked in the last step to the PC's IP that you just hardcoded (different from the first one).
In order to connect from the outside the LAN your on has to have those specific ports open. Then to connect into The 3389 PC you just type in your WAN IP or your dns name. If you want to connect into any of the others you type in your WAN IPort.

I.E.
X.X.X.X - in your remote desktop box will give you your first PC
X.X.X.X:3390 - would give you your second box
and so fourth.
 

3 more replies
Answer Match 43.26%

I am using remote access program that come with windows xp to connect with my desktop through my laptop, now both the computers are running on XP. What i want to know is that how come it takes ages to copy a big file from one computer to another? what can be done to improve the speed?
 

A:Remote access

What type is the file?
What size is the file?
What sort of connection do you have between the PCs?
 

3 more replies
Answer Match 43.26%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P9400 @ 2.40GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4047 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1799 Mb
Hard Drives: C: Total - 238464 MB, Free - 132581 MB;
Motherboard: Dell Inc.,
Antivirus: Symantec AntiVirus, Updated: Yes, On-Demand Scanner: Enabled

I have recently stopped seeing my boyfriend of four years. Somehow he knows everything I am doing. He lives 315 miles from me. I joined a dating site - he showed up on that same site as a match. I figured out how to block him from that site, but I do believe he reads everything on this computer. He is a project manager for the installation of hundreds of computers all over the world. He works from home and I believe he has several servers in his home office along with four or five computers. I am sure he is seeing everything I am typing right now. He is stalking me. I am pretty innocent and naive when it comes to computers and really need help.

When I am on the dating site I joined, if I click on a profile I may find interesting, my computer screen dulls and I get the message that the internet is not working. The only reason I find this odd is because when I am on my banking site, craigslist, facebook, etc. that does not happen. It only happens when I am on the dating site.

He gave me this computer. I have no ide... Read more

A:Ex has remote access

11 more replies
Answer Match 43.26%

Does remote access work across the internet , and is it available in XP Home?

If so, how do I set it up?

Thanks in advance for any help.
 

A:Remote access in XP help

The last time I read about Win XP, only Win XP Pro has the Remote Access feature, no t Win XP Home.
 

6 more replies
Answer Match 43.26%

I am not sure if I am in the right category or not for this question...but I would like to know about setting up other PCs so that I can remotely access them when I am away and help fix problems.

My parents drive me completely batty with their constant over the phone computer questions. It would make my life so much easier if I was able to just tap into their machine and show them what they want to know, or to check and see what the problem is. But I am not really at all familiar with how I can go about doing that...

My own personal PC is running windows 7 pro, and their PCs are running Windows Xp pro, Vista home premium, and windows 7 pro. (three different PCs) Their computers are not on any domains, just a simple basic home network for internet purposes. Nothing fancy.

How difficult or easy would it be for me to set this up? I generally turn off all avenues of remote access (like remote registry etc) so I know I would need to make the various services and such enabled again. I also figure that I may need to set up their router to allow such connections as well (right?) But beyond that, I am kind of clueless. I tried searching online, but a lot of the stuff I found talked about being on a domain, which is not applicable here.

Any help would be fabulous and much appreciated!!
 

A:help with remote access

You want to look into the MS built in feature called remote assistant. I don't have much experience with it but I know many people use it for exactly the scenario you're talking about.
 

2 more replies
Answer Match 43.26%

hello ..
 
can anyone help me how to scan if someone use a remote acces for my pc and notebook because one of the game master told me that pc got remoted from another pc and thats the reason why my game always disconnected or my mouse move arround and i also i cant chat through the game.
 
i try to format the pc but after update bla bla .. it statrts again.. is it possible my lan card or my motherboard infected by a virus or something..
 
hopefully you guys could understand my explaination.. (im not an english speaker)..
 
thanks for your help though..
 

More replies
Answer Match 43.26%

I HAVE A SIX COMPUTER NETWORK. 5 COMPUTERS RUNNING WIN 2000 PRO AND 1 COMPUTER RUNNING WIN 2000 ADVANCED SERVER. THE SERVER IS SET UP AS A RAS AND DHCP SERVER. WHEN I DIAL IN TO THE SERVER I CAN SEE ALL THE SHARED RESOURCES "COOL". WHAT I CAN'T SEE IS THE REST OF THE COMPUTERS ON THE NETWORK, "WHY?". WHAT IS IT I NEED TO DO TO SEE THE 2000 PRO CLIENTS WHEN I DIAL IN AND LOG ONTO THE SERVER?
HELP!!!!!!!!!!!!!!!!!!!!!!!!
 

A:Remote Access

10 more replies
Answer Match 43.26%

I commute between two cities, say X and Y. I have a computer in each location. I would like to know how I can access the computer in city X while being in city Y?

Thanks
 

A:Remote Access

Personally to make it easy on yourself I would recommend using GoToMy PC
http://www.gotomypc.com/remote_access/remote_access
 

3 more replies
Answer Match 43.26%

I want to set up remote access between two PCs over the internet. Both the PC I want to access and the Laptop I want to accessit with are running Windows XP Home. Is this possible, or does the PC I want to access need to be running Windows XP Pro?

Thanks In advance.

Lee

A:Remote Access

You you can find RDC on both Windows XP Home and Professional.Remote Desktop Connection Software

3 more replies
Answer Match 43.26%

Hi guys can I ask for some advice please
I need to help my daughter with her computer but she lives quite a distance from me so I would like to ask your advice on how I can connect remotely with her computer
I am running windows 7 and she is running windows Vista
So what is the best way of achieving this remote access and how do I do it please.

A:Remote access

Try teamviewer

TeamViewer

3 more replies
Answer Match 43.26%

I am running XP and I would like to know how to set up my computer so I can access it from another computer. I have tried remote desktop and can't seem to get that to work. I have tried windows messenger and it seems I have to ask for assistance from my computer before that will work. I would appreceiate any advice.

A:Remote Access

Just Googled your question and this popped up. It appears to be a free program for remotely accessing a computer. http://www.avvenu.com/products/remoteacces...CFS3wJAod8nuxIQ

1 more replies
Answer Match 43.26%

Trying to understand how Remote hooks to a computer on the internet using either UltraVNC or Windows XP Remote Access.

If I have a home network with say 5 nodes using a cable modem and router, how do I address the computer to find form the outside world?
Understanding my ip address will be Dynamic for the leased time, my router/gateway having the generic 192.168.1.1 and the other computers 192.168.1.xxx.

I don't understand, so how do I do this with WinXP remote and UltraVNC...

Thanks

Seven
 

A:Remote Access help

Do you know the IP address of your cable modem?
 

2 more replies
Answer Match 43.26%

Hello,

I thought i had a hijacked computer and so i reformatted. a couple of days later, i found that i was not able to access my own firewall settings and that, removing my backup drive (no operating system) caused symantec corporate to fail (it was looking for files it couldnt find. this was strange, so i took out both of those drives and put in another and formatted and installed xp and norton corporate edition again. now i am wondering if there is a way for the guy who gave me the corporate edition to be on my computer, hiding data loggers and bypassing my settings by way of some remote administration (he is a GIS guy for a company and manages their server). maybe something else is happening, i dont know. I can put the other drives in at another time and run hijack and startup
I ran hijack this and startuplist on the current hard drive. Is there anything there to worry about?
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:14:18 AM, on 2/3/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Spotmau WinCare 2008\sub\FSDRIVER\FolderProtectService.exe
C:\Program Files\Common ... Read more

More replies
Answer Match 43.26%

I know there are many different ways to have remote access. Right now my remote offices access my unix server through telnet with an emulation software over a hardware vpn connection (two linksys vpn routers). Well, we upgraded our medical software to a windows version and I love it. But now we are ready for the full install. To access the program remotely I just need access to it's executible file through a mapped drive or such. The software manufacturer recomends using terminal server. But why can't I just set up my server (running server 2003 enterprise) as a vpn server and access from my two sattelite offices that way? Can anyone recommend a good tutorial on terminal server set-up? I have two remote offices with two workstations at one office and three workstations at the other. I just want to use the easiest method. Any input would be great.
 

A:remote access

Information on how to configure a 2003 VPN server can be found at:
http://www.onecomputerguy.com/networking/w3k_vpn_server.htm
 

1 more replies
Answer Match 43.26%

Hi you guys. I have a quick question. I work for a company that uses QuickBooks Pro. They are thinking about the possibility of me working from my home, since I too have QB Pro. That sounds great, right? Well, there is a problem. Normally, I would back up the file to a CD, bring it home, work, and then carry it back to the office when I was there and restore it. That sounds good...but that won't work, if during that lapse that I am not in the office, the owner is working on QB too. Following me so far? I have looked into & worked a little bit with GoToMyPC - but that is $19.95 per month, and I am not sure if the owner would be willing to dish out a per month fee. I have also read a few other posts where UltraVNC is recommended. Furthermore, I did a search on my help & support and found that I have "Remote Desktop Connect" - what's that? Could that work? What are my options, so that when we discuss this, I know what I can and cannot do that will work for both of us. I like GoToMyPC, because I can work on their computer, and don't have to worry about saving to a CD and restoring - but again, that monthly cost.
 

A:Remote PC Access for a new job

6 more replies
Answer Match 43.26%

Hi, I was wondering if anyone could help me im using the above application to access remotely between desktop and laptop. The laptop to desktop connection works fine but when i try to view the screenshot or control my laptop from the desktop once i log in all i get is a blank screen any advice??
 

More replies
Answer Match 43.26%

How can you communicate with a client you're helping with remote desktop.
I will like to know how to setup my built in microphone on my laptop or the remote headset gear, to speak with the person am helping remotely, any idea's from a network administrator or a remote help desk, person . thank you for your help in advance

More replies
Answer Match 43.26%

Hello dear,

I need access to different PCs in different places from my own PC;
Ok, there are teamviewer, radmin, etc.. but that's very costy for me.

Any other app or way to do that free or cheaper?

Thank you

A:Access remote PCs

Teamviewer is free for private use.
Or is this for work use?

4 more replies
Answer Match 43.26%

hey guys/girls.... i am tryiing to access my computer remotly from my class using webcommander atelier ...i have to go through a netgear wireless router to get to my computer... i have tried pinging but that has not worked too. my fire wall is shut off so is norton. Does anyone know any software that would work better than this or any ideas whats stoping this . and the router allows pinging
 

A:remote access

12 more replies
Answer Match 43.26%

Hi everyone,
I've been a member here for a while but have never posted so let me introduce myself. My name is Jerry but my friends just call me doc (an old nickname from nam),. So Hello!!!
Now for my question: Recently I've had a LOT of problems with people(or person) trying to hack or infect my pc. I just got another one my myriad of spyware-anti-virus tools picked it up, called "Graybird.? (i forgot the second part of the name although I'm sure sommeone will know what I'm talking about) anyway my anti-virus just picked up a riskware in my "System Volume" that was a reboot tool. I'm assuming that it's used to simply reinstall the malware as soon as you reboot your pc. Maybe I'm wrong as I'm a bit of a noob. Anyway, is how can I go about pinging to see if someone has gained access to my pc remotely? Or can I even do it at all? If not is there a way to find out or prevent the possibility of it happening at all in the future? I appreceiate any consideration anyone gives to reading my ranting and a possible answer to my post. Anyway nice to make everyones aquaintance and have a good one.
Later!
Doc

A:Remote Access

Well...there are anti-malware programs...and there are malware programs that masquerade as anti-malware programs .

Why don't you tell us the actual name and version of the program you used for this "notification"...and also tell us what programs are installed on your system for the purpose of finding/defeating malware of all sorts.

As for items in System Restore folders...it used to be a common suggestion for anyone using SR and attempting to rid themselves of known malware...to temporarily turn off SR when making the attempt (otherwise, the malware may merely reside in one of the folders (one for each partition) you mentioned.

Louis

1 more replies
Answer Match 43.26%

Hello,

I'm new here, so please forgive me if this has already been posted, or indeed if it is in the wrong place.

My father-in-law lives miles away, and unfortunately is being charged a fortune by a company to simply install the latest version of Mozilla Firefox (he has paid them once, and now the new version is available they have told him he will need to uninstall the old version and install the new version, they tried to talk him through this on the phone (at peak rate) and did such a blinding job that it doesn't work at all now). I was wondering if there is anyway to access his pc remotely (I'm on Vista, he's on XP if that makes any difference), so that I can uninstall and download the newer version. Obviously, i have seen remote access in offices before, but wasn't sure if there was a way I could do this (obviously with his permisssion first)?

Again, apologies if this is in the wrong place and thank you in advance of any advice you may have.

Carla

A:Remote Access

You would need remote access software. It would have to be setup first. If your father in law can't, with support, uninstall and install software, this is something you will need to do personally onsite.

Suggested softwares;

teamviewer
logmein
hamachi
tightvnc

2 more replies
Answer Match 43.26%

I appreciate any assistance out here...
My EX-computer tech had originally installed LOG ME IN remote access to ALL of my office computers and laptops. He was fired for stealing in December of 2009. I removed the LOG ME In feature from my hard drives in March, but never shut off remote access. A week ago I noticed a LOG ME In window was open on a laptop and have since seen a variety of dates/times on my events logs to ALL of my office computers showing that LOG ME IN has tried to open. This person had worked on our computers for a couple years, had all passwords, wireless etc...pretty much controled every part of our computer world. Can he still be getting into our computers? If so, how can I prove it and stop it?
 

A:Log me in remote access

7 more replies
Answer Match 43.26%

looking for a web based remote access solution. I found one not long ago, but have now forgotten what is was. You send an email with a link and the other party clicks on it and then you can access the other computer. It was free or almost free. anyone know what i am thinking of?
 

A:remote access

Web based? You are going to have to be more specific as all of them use the internet. If you want a web browser based one you can use UltraVNC using it's client or a web browser on a different port.
 

2 more replies
Answer Match 43.26%

does anyone know about the remote access and can they tell me how i can know for sure if someone has remote access to my computer or is viewing my emails and what i am doing online?

A:remote access

Welcome!

See this tutorial: Remote Desktop Connection (RDC) - Network - Windows 7 Forums

That is for Windows 7, but Vista is the same.

Unless you have that enabled, nobody can log in remotely using built-in tools. If it is enabled, they still need your username and password to get past your logon screen. That is why it is a good idea to have a password.

2 more replies
Answer Match 43.26%

Hi All,

I have a desktop running XP Pro at home with a broadband internet connection, this is my only ISP, the broadband connection Adelphia.

I would like to use my laptop, which is running XP Home, from work to connect to my desktop at home useing a dial up modem.
so I may surf the internet from work.

Can I do this if my ISP doesnt support dialup modem connections? If I can will you please advise me on the way to set it up. Should I use Netmeeting? I want to try and avoid any 3rd party applications if I can. TIA John
 

A:XP Remote Access

I think you'd be MUCH happier with the results of just obtaining a cheap ISP to dial directly. For instance, www.access4free.com is a maximum of $10/mo for unlimited Internet access, and in months you use 10 hours or less, it is free! Due to the design of v.90/v.92 modems, the absolute maximum speed connection you'll get between two stand-alone modems is 33kbits, so surfing directly to a dial-up ISP will also be significantly faster.
 

1 more replies
Answer Match 43.26%

I would like to be able to connect to 3 different computers at three different locations remotely to administer some documents. The 3 computers are not networked although they are connected to the internet through a wired router.

Is there free software available that would enable me to do this? If not is there software i can purchase and can anyone provide a recommendation?

Thanks

Dave

A:Remote access

You could try team viewer, It works pretty well, the only problem is that its kind of slow, maybe sense all you're computers are connected together on the same network it will be a little faster

7 more replies
Answer Match 43.26%

Hi name is Brody and i was wondering, well first ok i live in Baltimore and my mom lives in NY because i move to MD anyways i want to be able to connect from my computer from Baltimore to hers where she can see what im doing and if she has a problem with the computer i can fix it. I tried VNC or maybe im just doing it wrong but can anyone help me step by step or somthing to help me do this i dont kno what im doing wrong she has windows XP i have Vista. I sent her VNC and had her installed that told her how to over the phone but i dont kno if i am doing somthing wrong because its not letting me connect says time out or somthing. If anyone can help that will be great and thank you.

Brody
 

A:Remote Access

11 more replies
Answer Match 43.26%

Hi, I am using vista ultimate, I noticed that under properties in my computer/remote,the box is checked for remote access?,as I am not connected to any networks,is this neccessary?,can I un tick the box?,or do I just leave it? Can anyone explain this to me,thanks Rip

A:Remote Access

Untick it if you wish. It's for when people connect to your computer from other computers.

4 more replies
Answer Match 43.26%

why does remote access appear on my start menu when i did not access it? i am new here and have alot more problems, don't really know where to start but this one just occured again, I need to start somewhere. i am not stupid just not informed.
 

More replies
Answer Match 43.26%

I believe someone has remote access to my computer. What are ways for someone to access remotely if they only have your IP address? Nothing would have been downloaded except my computer always seems to do a mini dump where is says the computer shut down unexpectedly. Once this happens I believe somehow someone has access. Is there a way I can prevent being accessed remotely? I am wired. Also one other thing that leads me to believe someone has a different type of remore access is, when I am reading a page all of a sudden the hour glass will appear as if there is something going on in the background some processing that I am not aware of. It is strange to me that the hour glass will just appear. I am thinking when this happens someone can somehow take a screen shot of my computer. Is this possible? Why would the hour glass just all of a sudden appear and you're not even turning a page.
 

A:remote access

There are 2 ways of remote access that Windows has built in. One is Remote Assistance, you have to send out an invitation file to someone first, then he can connect in and control your keyboard and mouse. It is meant for technical support. The second one is Remote Desktop; only the Win XP Professional / Vista Business / Win 7 Professional versions and up have this feature. It is meant for situations like when you want to connect to the office computer from home.
There are also other system administration remote access products from 3rd parties, like PC Anywhere, VNC and others.

Yes, there is a kind of hacking tool called screen scrapers that can read you screen.

The best way to stop most remote access is to use firewalls. There should be one software firewall on the PC, and a router firewall. I think I have seen ~$50 routers that has Stateful Packet Inspection (SPI) firewalls from Linksys. SPI is better. This protects you from inbound attacks/connections. Then the software firewall on the PC warns and allows you to stop unknown programs calling outbound. ( malware phone home )

When you suspect remote access, start Task Manager and look for unfamiliar processes. But this works only if you know what is normally running on your PC.

You should also run msconfig and check what programs are on the startup tab. Those listed there automatically start when you login. All of those listed there you should already know about, eg antivirus or msn messenger. Thoroughly verify that a... Read more

2 more replies
Answer Match 43.26%

Hi,

I have a daughter living half way across Canada from me...she has been having problems with her computer and phones me for help(she in not too computer literate , I am more computer literate than her but am never afraid to learn more)...
Rather that her phoning me all the time and my not being able to see what it is she is talking about sometimes, I am wanting access to her computer so that I can actually go in and see what it is that may be her prolem...
I saw on TV earlier today, that there is a way,using XP, to set our computers up so that I can get her computer onto my screen using a remote access program inside XP...does anybody have more information for me please?...I downloaded a program from work a little while ago REAL VNC that will do the same thing, but I believe it may be too complicated for her to understand how to set up on her computer..

thank you in advance
 

A:remote access

the built in windows messenger dose this in tools remote assistance,where you can see there screen and there is a chat window as well
 

3 more replies
Answer Match 43.26%

Hi all!!

I have a network in home and I'm able to connect to a windows 2000 terminal server to "remote control" it. I want to do the same with another computer in another network.

How can I do it? The squeme is:

network computer
||
ADSL router
!!
INTERNET
||
ADSL router
||
network computer with terminal server

I just can't get to it.

Thanks!
 

A:Remote Access

Does the ADSL router at the other end have a firewall or ACL thats blocking your connection attempt?
Is it just the remote control access you can't get to run or can you not see the box in general?
 

2 more replies
Answer Match 43.26%

Is it possible for a hacker to have hacked my Wireless connection and established a remote access of my system without me having granted the permissions or having set it up to do so of my own accord? ​
 

A:Remote Access

Yes. That is why they are called "hackers" instead of "guests".
 

1 more replies
Answer Match 43.26%

I have a new Laptop (windows 7 home premium) that I run through a router to access the internet and I want to remote my Desktop PC (Windows XP). I would like to do it the easiest way possible.
 

A:Remote access

The remote desktop would need to be running a professional version of Windows in order to accept remote connections. If so you must open port 3389 on your router to accept the connection and use remote desktop connection which is located in the accessories folder.
 

1 more replies
Answer Match 43.26%

I have two pc both running vista. One is my main machine which I use daily and one is at my parents house which my brothers and parents use. I want to be able to remote access the pc and fix any problems and be able to log into there network from my pc. What programs do I need and how to I set it all up any help would be great thanks.

A:remote access

You may Try VNC http://www.realvnc.com/ the Personal edition will do the job for you :)

1 more replies
Answer Match 43.26%

I just moved out of my parents' home and am now a province away. they need to install new virus software but can't figure out how to uninstall the old stuff. i tried helping them but failed, but i've heard you can remote access a computer in winxp and do stuff like that. can anyone tell me how? we're both using winxp, don't know if the fact that I'm using a laptop and they're on a desktop would make a difference. please make it fairly simple I'm not highly techy. thanks.
 

A:remote access

7 more replies
Answer Match 43.26%

Does anyone know anything about remote access called Cheesecake?

A student of mine has said that this has been put on his machine by a relative and that relative seems to be able to access his computer at any time - without being stopped via a password etc.

If you know about this Cheesecake, is there a way to disable the permanent access and only allow access with permission?

A:Remote access

Never heard of it. If there is no option to enable a password, have the user uninstall it and use something else like Team Viewer.

5 more replies
Answer Match 43.26%

Ok I'm in the middle of trying to figure out VNC to connect to computers remotely but would like to ask if anyone has suggestions on how to connect to computers remotely. Does anyone use PC Anywhere and if so can you tell me what you think.
Trying to get a feel for what others are using to access computers remotely.
 

A:remote access

15 more replies
Answer Match 43.26%

Is it possible to give remote permission for a specific admin in a specific machine.

I have 4 domain admins in my environment.
I want to give remote access permission for  (AD machine) to a specific admin (User A) .he can only take remote of the AD machine,
But it should be accessible from a specific machine. He should not be allowed take remote of (AD machine) from other machine.
please suggest me .

More replies
Answer Match 43.26%

Hi All,

I'm looking into being able to RDP onto my desktop PC at home from work. Assuming the firewalls at work allow me to route out, how would I go about configuring my router at home to allow this?

I'm currently using the latest Linksys cable router (can't remember the model number but can find this out if needed).

Cheers,

Nik
 

A:Remote Access

6 more replies
Answer Match 43.26%

I have a home computer with VPN access to work (work actually let me bring a computer home).

Anyways, there's a program that's running that's called Remote Management (remoteIn.exe).

Can somebody tell me how this works ?

I'm not connected to my work's network unless I do so myself, so my question is can my work monitor my actions at all times or only when I am connected to the work network ?

Thanks for any help to this question!
 

A:Remote Access

8 more replies
Answer Match 43.26%

can anyone give me a good link so I can do remote access? I have tried for hours looking on google and trying to configure it to let me access my server from anywhere. I am not sure what I am doing wrong... I have forwared ports and everything. I just need some guidance from someone who is perhaps done this before.

Thanks for your time.
 

A:Remote Access

16 more replies
Answer Match 43.26%

I provide remote support for my client frequently, but in every case my remote session has to take control of one of the nodes on their LAN. If all of the nodes are in use, I cannot connect.

Isn't there a way for me to connect to their LAN via the internet as though I was a node myself (without needing to commandeer a workstation from someone else)?
 

A:Remote Access

8 more replies
Answer Match 43.26%

Just wanted to know that you can remote access to our PC when there is problem. Can I know whether is my PC safe or not will your tech see and download data to their pc. Will you be able to access my PC after diagnosing as I am worried about Data Protection nowadays. Hope u can anwer my request. Thanks a lot

More replies
Answer Match 43.26%

I've heard a lot about "remote access" on a computer, but i'm not quite clear on the reasons/advantages of using it. I've used a few Unix shells in my day, and i've heard that that is considered remote access of a computer.

I have somewhat of a n00b question... I have a box at NCSU, and a box at home. I was wondering if there was a way i could remote access my box and home, and what exactly that would entail? What would i be able to do? Do the 2 boxes have to be on the same network? Can i access the harddrive of my remote box? Can i install/download files USING the remote box (i'm behind a firewall at NCSU)?

Both boxes are running the exact same windows XP Sp2 systems and pretty much the same configs. Any information/sites you could give me relating to the topic would be much appreciated.

A:Remote Access?

There are several programs that can enable remote access of your pc from another pc over the internet.You can indeed accomplish what you state you want to do.PC Anywhere is one,http://www.symantec.com/pcanywhere/ Go To My Pc is another:http://www.gotomypc.com/s/kim/2005/newsHere's another software company that provides several versions depending on exactly what you wish to do:http://secure.logmein.com/dmcq/068/support.aspMicrosoft XP also has the ability built in.See "Remote Assistance"http://www.komando.com/tips_show.asp?showID=8722If XP is not installed on both computers then you can use "Remote Desktop". This is accessed through NetMeeting, a communications program in all versions of Windows.Also explained at:http://www.komando.com/tips_show.asp?showID=8722

3 more replies
Answer Match 43.26%

Hi
All I want to do is access my own computer from any other computer via internet. Some programs like "GoToMyPc are expensive. Also is it possible to turn on your computer remotely.
Any ideas out there.
Graeme:
 

A:remote access

9 more replies
Answer Match 43.26%

i believe some one is using remote access on my computer, they have windows xp and i have windows 7, we are in the same house and on the same network, how can i find out if this is happening? thank you

A:remote access

Turn it off. Go to Start right click on Computer select Remote uncheck all or select "Windows Vista and up" can only remotely connect or similar to that. I do not know the persis title. Then click Apply then Ok.

Why do you think someone is remotely connected to your pc? By default a Windows XP machine can not connect to a Windows 7 machine, or a Pro Edition can not connect to a Home Edition Windows XP to Windows 7 Home Premium for example.

Which version of Windows xp do they have and which version of Windows 7 do you have?

5 more replies
Answer Match 43.26%

Hi, I am running windows 8 professional on my home PC and running windows 8 home on my Venue 8 Pro. I downloaded the remote desktop app on my Venue and setup a connection to my home PC. It was very easy and worked (at least on my home network) Now the first time I tried to access the computer outside my home it says that it can't find the PC. Is the connection only good with me being on the home network? Do I have to install some third party VPN to access it?

I am not very familiar with windows, I have not used it at all since XP, so I am still learning

Thank you for any help here.
 

A:Remote Access help

16 more replies
Answer Match 43.26%

hello guys,

I have heard IP address is so important to access the remote machine, for example if i have the ip address, then

how can i access the remote machine.
how can i make changes in the remote machine.

please explain me.
PUNJABIAN263
 

A:access the remote pc

6 more replies
Answer Match 43.26%

How can I read the remote access log? or is there another log I can't see?
I want to be able to see connection failed or sucessfull.
I am looking at the iaslog.log file.
It has the ip, user, date, time, RAS, server name, then some numbers.

Is there any hope to get a list of sucessfull or failed connection?
 

A:Remote access log

Group Policy. Or I should say Security policy because it probably falls under secpol.msc.
 

3 more replies
Answer Match 43.26%

I have a ad-hoc netwrok at home and my PC is like the server while my laptop is the client.

I want to access my PC via my laptop over the LAN. But if i am using remote desktop, I have to log out / lock the account before doing so. But while using remote assitance, the server has to give the permission.

So all i want is a way to access my PC via my laptop. So that if anyone is using the PC. They can see what i am doing.
 

A:Remote access over LAN for Win XP

6 more replies
Answer Match 43.26%

A computer guy friend paid for me to have Malwarebytes (the paid version) on my computer. Awhile later, he fixed my computer. It wouldn't even turn on. He was a huge help. But he decided to end our friendship. One night the mouse had a life of its own: just for 15? secs., but after that my Malwarebytes wasn't working, and I had no protection. It was later I learned to turn off remote access. Remote access could have been open due to me calling a company who did their job via remote acce.ss.

When he fixed my computer, at one point he used a USB to get email working as it was easier than a disc. He showed me it ( to prove he wasn't taking stuff off my computer) and told me it had a program on it he was using for my computer.

I never noticed anything until the night it seemed there was another mouse arrow moving on my computer. My questions:

1) do you think he had remote access?

2) if so, how much of what I did on my computer could he see?

3) if so, could he see the things I internet searched?
 

A:remote access

split into it's own thread.
 

1 more replies
Answer Match 43.26%

Hey guys could any1 post a remote acess tool and also, if i were to go into my friends computer that had a virus in it would it transfer it from his comp to mine by me using this remote access?

A:Remote access?

I think it would have to depend on the type of virus. There are ones that effect remote access. But since you are technically not putting anything on your hard drive when working on his computer with remote access I would not be to worried about. But you might want to ask some of the guys in the security section also. I posted a link below from microsoft about a remote access trojan you might want to check out.

http://www.microsoft.com/technet/sec.../virusrat.mspx

1 more replies
Answer Match 43.26%

Hello, My frined i haveing some problems with her laptop witch is running windows vista. is there anyways possible to remotly access her vista? i've been up all night trying to reseach it and im not finding anything that is work. the reson i dont just go to her house is because she is a good 500 miles away. thank you.
 

A:Remote Access

9 more replies
Answer Match 43.26%

Hi Guys,Someone seems to have remote access to my PC. Strange files have appeared on my desktop. Someone has started accessing one of my online accounts from a remote location and knocking me offline when they do.The real kick in the teeth came when I went to check my Favorites earlier today and found that someone had re-ordered my entire favorits list and had everything in alphabetical order AND just politly deleted about a half dozen entries that I had added in the last few days.My system is Windows XP Home with SP2 and all updates are installed. Here's my HJT and Silent runners logs. Please let me know if there is any thing there that looks evil.Thanks,WendyLogfile of Trend Micro HijackThis v2.0.2Scan saved at 10:22:13 PM, on 12/19/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exeC:\Program Files\Alwil Soft... Read more

A:Someone Seems To Have Remote Access To My Pc

I apologize for the very long delay. We have a huge backlog of HijackThis Logs to handle and it has been taking us greater time than normal to get caught up. If you are still having a problem, and want us to analyze your information, please post a brand new hijackthis log. If we do not hear back from you within a couple of days we will need to close your topic.When posting your logs please post them directly into the reply. Do not attach them.Also make sure you have already followed the steps outlined below:Preparation Guide For Use Before Posting A Hijackthis LogThank you for your patience.

15 more replies
Answer Match 43.26%

I need some help using a remote access program (open to new programs, too). My friend who lives across the country's laptop needs help, and as it's easier for me to take control and just get everything done, I need some help with using a remote access program... It seems like TeamViewer lags out, since she can see what I open, but 10 minutes later, I still can't see firefox...

A:Remote Access Help

Odds are not in your favor here, if TeamViewer is timing out then more than likely any or all of the remote control tools will timeout.

If the user on the laptop dies not need to see what you are doing, you could try a microsoft direct connection, and then try to repair the laptops issue.

Do this by: Clicking Start, Run, type in MSTSC and click ok. Then whe prompted for a computer name, you will need to know the IP address of the laptop, and a user name and password. Hope this helps!

3 more replies
Answer Match 43.26%

Hi guyz,

I want to remotely access my home PC, from my office. Please no remote softwares
When i check the home PCs remote access option, i see remote assistance but no remote desktop. while in office PC its present.
I want to access it with my real ip , provided by my ISP.

Q. How to install it on my Pc( windows xp.)
Q. How to set a password. to prevent unauthorized access

I have a 3com router,and its configured but i am not sure about the remote configuration and port number.

Any help.
 

A:Remote access

7 more replies
Answer Match 43.26%

What is best way to have remote PC access with Vista? I cannot seem to get meeting place to work for this??

Thanks,

Mike

More replies
Answer Match 43.26%

Hi guys,

I need to be able to gain remote access to a friend's lap top. We are both on Fast internet connections. What is the best way to do this? Do I need special software?

Thanks

Jabber
 

A:Remote Access

6 more replies