Tech Problem Aggregator

lock-ups, pop-ups, and watermarks on printed material

Q: lock-ups, pop-ups, and watermarks on printed material

computer freezes, especially when going to I am getting pop-up ads. everything I print on my Brother MFC-440cn printer comes up with a watermark from "Spectrum Glass" When trying to download from your instructions for DDS I get a blank page and no download. I have included info that I thought may be useful.

A: lock-ups, pop-ups, and watermarks on printed material

Run the following:

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.



1 more replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, “The record was previously printed, do you want to continue printing again?”

Please tell me a way to perform the above in my Form.

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.

2 more replies
Answer Match 48.72%

i am looking for a program that will watermark a video for me, i need this program to be portable though.

i have ones for pictures, but now i need one for the videos im making (i show off a cool free program and all of the things that program can do)
im going to post these videos on youtube and than put them on my site (just thought id let you guys know so you dont think its for illegal reasons)

thanks for any and all help =)



VirtualDub is a free open-source video editor for Windows. It can't do much on the editing side, but it's very useful for doing things like compression, adding watermarks, applying filters, etc.. What I would recommend would be making your video, render/export it, then put it in VirtualDub to put a watermark over. do not have to install it, just download and extract it (Right-click zip file, and press Extract). The Watermark filter included in VirtualDub is pretty bad... So install this filter. download, extract. Copy the "delogo.vdf" file. Go to the VirtualDub folder you extracted, and create a folder (If it does not exist) called "plugins". Now paste the .vdf file in there. Now start up VirtualDub (by double clicking VirtualDub.exe) Go file -> Open Video File.. and select your video. Go to Video -> Filters. In there press add and DeLogo. Now, to make your watermark, use your graphic editing program of choice, and make it. Now leave everything you want see-through/transparent in your watermark white or another color (if so write down the RGB Numbers of it (eg. Red = 255, Blue = 122, Green = 12). Now save it as a ".bmp". Now back to the VirtualDub. In DeLogo open your .BMP file, and check Transparent Color. For white, enter R: 255, B: 255, G: 255. For another color, you'll have to enter something different. Tolerance means how much can the col... Read more

2 more replies
Answer Match 48.72%

Sorry guys but this does not fit into a fun type forum. I am in seriouse troubel. I want to watermark a word 2007 document. It seems that I can view it but not print it. To make maters worse I have to put this on a memory stick and take it to a local library that would probably have an older version of office.

I would love help on this as ths is a series of legal documents




Your post doesn't quite compute.
Do you already have a Word 2007 document (file?) that can be VIEWED but cannot be PRINTED?
You want to insert a watermark into that Word 2007 document (file?) that can be VIEWED but not PRINTED?
Once you insert a watermark do you need to take the Word 2007 document (file?) to a library?
Do you want the Word 2007 document (file?) with watermark to be printable?
Are you the owner/author of this Word 2007 document (file?) or has another "owner" protected it from editing and printing?


1 more replies
Answer Match 48.72%

Hello Guys.....
I just found an article from a site which is in Arabic but unfortunately it has a watermark on it. i tried to remove it on this website but when i use clon stamp, it removes first time but appear again when i start to remove from another side. i am not master of Photoshope . so plz do you know any software which really works for removing watermaks. it is really urgent for my research .. thnkx
here this article (in 2nd pic, only lite green page ).... if anyone remove it for me .. i shall be very thnkful for him .... plz guys it is urgent and IMPPPPPP....

A:Need Help for Watermarks

11 more replies
Answer Match 48.72%

Hello everyone! I'm asking for help on how to make a watermark. I have Win98, PC. I have a logo I've designed that I wish to make as a watermark for my letterheads, etc. I have Adobe Photo 5 and Microsoft Word to work with. Any ideas? Naturally, I'll need specifics. Thanks.


7 more replies
Answer Match 48.3%

I know how to create a text watermark with word, the problem is it shows up only once int eh center of the page. How do I get it to fill the entire page in a smaller font?


More replies
Answer Match 48.3%

I need some help here. I have a large document and I want to crate a watermark on each page without having to copy and paste each watermark and format the text. Any help is appreciated. I have until lunch time to get the document ready....

A:Watermarks in Excel

Hi khodjo,

I've ansered this for someone else before:
follow this:

(I hope that link works!)


1 more replies
Answer Match 48.3%

Can Infraview make watermarks and if so how do you do it with Infraview thanks for your help

A:Infraview and watermarks

1 more replies
Answer Match 48.3%

I work with drawings and forms at my company. The drawings and forms are TIFF or PDF. I have to print these documents with a custom watermark. In the print dialog box I went to Properties then Edit tab. In there I set up a new watermark using the "Add Text" button. Finally, I saved the watermark. When I went to print using the watermark... (With it selected)...nothing printed on the documents.

I had no problem doing this with my old Windows XP computer, but for some reason Windows Seven will not let me print a watermark...

Can someone please steer me in the right direction with what I should do? Thank you

A:Printing Watermarks

Hi knshives and welcome to W7 Forums

Take a look at this: watermark picture shark freeware image gallery protect

Currently, you are allowed to use it commercially without a license, but it is possible that this might change in the future. registration watermark picture shark freeware image gallery protect

7 more replies
Answer Match 48.3%

Is there anyway to keep them from showing up when viewing the document but have them show in the printed document?

A:Watermarks in Word XP

6 more replies
Answer Match 47.46%


When inserting a text watermark I can not see the full watermark in print preview mode or printing. It appears on only some pages. Whether it is an existing doc or new doc doesn't seem to matter. It's actually pushing down the watermark on the page when I try to type. I tried the same scenario on another computer with 2003 and it worked fine. With 2003 the watermark does not appear in the header/footer. Is there some setting that tells 2003 how to treat the text & watermark? Word 2003 is up-to-date. Any suggestions would be greatly appreciated?


A:Watermarks in Word 2003

7 more replies
Answer Match 47.46%

My daughter is in need, as well as I, of knowing if it is possible to creat new watermarks/backgrounds for her presentation assignment for school.

She does have her own photos for the assignment on floppy.

Thanks for your time.

A:Pr Pnt 2002: Creating watermarks

To create a watermark in Word,just go into headers and footers, Select "Insert" from the menu, then picture from file and nominate the object youwish to appear as a watermark.

You may edit the picture by clicking with the right mouse button and then making it lighter, as well as selecting the "layout" tab and sending it "behind text".

When you have moved the object in position, close the header tool bar.

Hope you can follow these instructions.


2 more replies
Answer Match 47.46%

I've got a table in MS Word and I'm trying to add a background image to each cell.

I can add the watermark to the entire doc, but can't get it to appear in each individual cell.

Any thoughts?

A:Using Watermarks with tables in Word

9 more replies
Answer Match 47.46%

With the wallpaper changer that's in Windows 7, is there any way to get the picture title to show up in the paper changer or no.

A:watermarks with windows 7 wallpaper

I don't quite understand what you're asking can you post a screenshot.

Use these tutorials for posting screenshots.
Screenshot with Paint
How to Use the Snipping Tool in Vista - Vista Forums
Screenshots and Files - Upload and Post in Seven Forums

If you are talking about where you change the wallpaper at if you hover over the wallpaper it will display a name and other details.


6 more replies
Answer Match 47.04%

I have been setting up printers on a network to print watermarks in terminal server. I have successfully set up multiple win XP systems but there is one that is giving me fits. It has the watermark tab enabled locally but in TS it is dimmed. All of the PCs and the Terminal Server have the same drivers. Does anyone have any ideas as to why this one system is reacting differently?

More replies
Answer Match 47.04%

We are using Win2000 Server and Win2000 desktops with HP 5Si printers. I had to download an updated driver (hp 5SI PCL 5e) to be able to see the option for watermarks.
From the Server, where I had to initially install the driver, I can edit and print watermarks via the printer options (software doesn't matter, but it was NotePad).
From the desktops, we can change the watermarks, but the edit button is greyed out. Also, watermarks do not print out.

Does anyone have any thoughts or ideas on this?

Randy Overman

A:(Solved) Watermarks with HP 5si printers not printing


Been looking at this one for some time. Have you tried installing the driver onto the Desktops to see if it would work?

It seems as if the User's options are not allowed to access the Editing and Printing. Have you logged on as Administrator to see if its the User's problem?

Also, as I am just getting into Win2000, the server has certain snap-ins that aren't installed on the Pro version. Have you tried using the MMC to add the snap-in that is used on the server?



2 more replies
Answer Match 46.62%

I'd like to remove logo from picture (and other pictures with the same logo):
Can I invert the text effect on this image somehow that it will be very less visible or invisible ? Maybe there is software that can do the job (even if it will cause some image loss in the place where the watermark is)?

thanx for your help

A:Software for removing watermarks/logos from pictures

16 more replies
Answer Match 46.2%

what to do when a dell latitude d630 laptop is not on but cap lock, num lock and scroll lock is on and i'e tried to check the VGA and the processor

More replies
Answer Match 45.36%


how to disable Caps lock, num lock, scroll lock screen messages?

I have desktop pc with two keyboards usb and bluetooth. Also TOSHIBA Bluetooth Stack software, but in device manager: keyboard > hid keyboard device both using microsoft drivers. And I dont have any software installed for keyboards. Also bluetooth has separate system tray indications (it is also disabled) so its not that. I made some googling and found other fix it with Hkey_Local_Machine\Software\Widcomm\BTConfig\General KeyIndication set to 0, but I dont have it in registry. Acualy I dont have anywhere in registry KeyIndication. So any ideas how to disable it? Thanks

A:Caps lock, num lock, scroll lock screen messages


You'll find that the messages are controlled by a piece of software that came pre-installed on your machine when you bought it. Try looking for a Hotkey managing app to see if the notifications can be disabled.


9 more replies
Answer Match 45.36%

For some time now, i have been experiencing that my Num Lock, Caps Lock and Scroll Lock all lights up (not blinking) all at the same time, I tried to google it but i can not find any solutions or explanations for it.

Does anyone know if it is bad? and what is causing this?

I am having a wired keyboard with nothing fancy just a standard issue Logitech keyboard.

A:Num Lock, Caps Lock and Scroll Lock all lights up (not blinking)

Can you toggle those functions off, one at a time? Sometimes restarting the computer will use the last state it was in, I'd fully shut down and pull the power cord from the computer and the keyboard cable then put them back and try again.

2 more replies
Answer Match 43.26%

Hi everyone,

Just thought I'd like to share with you the names of some of the reference books that I use when responding to posts. It would be interesting to know what other members of the forums use. This list will be updated periodically when necessary.

Windows Administration Resource Kit: Productivity Solutions for IT Professionals
Microsoft Press
ISBN-13: 978-0-7356-2431-3
ISBN-10: 0-7356-2431-3

Windows Group Policy Resource Kit: Windows Server 2008 and Windows Vista
Microsoft Press
ISBN-13: 978-0-7356-2514-3
ISBN-10: 0-7356-2514-X

Windows Vista Resource Kit 2nd Edition
Microsoft Press
ISBN-13: 978-0-7356-2596-9
ISBN-10: 0-7356-2596-4

Windows Vista Inside Out Deluxe Edition
Microsoft Press
ISBN-13: 978-0-7356-2524-2
ISBN-10: 0-7356-2524-7

Mastering Windows Vista Home Premium and Basic
ISBN 978-0-470-04614-2

Windows Command-Line Administrator's Pocket Consultant, 2nd Edition
Microsoft Press
ISBN-13: 978-0-7356-2262-3
ISBN-10: 0-7356-2262-0

Windows Vista Administrator's Pocket Consultant
Microsoft Press
ISBN-13: 978-0-7356-2296-8
ISBN-10: 0-7356-2296-5

Windows Powershell Step by Step
Microsoft Press
ISBN-13: 978-0-7356-2395-8
ISBN-10: 0-7356-2395-3

Essential PowerShell
ISBN-13: 978-0-672-32966-1
ISBN-10: 0-672-32966-2

Windows Vista Annoyances
ISBN-10: 0-596-52762-4
ISBN-13: 978-0-596-52762-4

Windows Vista in a Nutshell
ISBN-10: 0-596-52707-1
ISBN-13: 978-0-596-52707-5

Windows Vista In Depth
ISBN 978-... Read more

A:Reference Material

Oh wow, you use a lot of resources!

I use my past experiences and intuition.....

As well as the Tutorials here.

Maybe one day, when I have the time, I will get that advanced.


20 more replies
Answer Match 43.26%

hey everybody-

I was just wondering if this system would run Vista basic version when it come out. I just use this computer primarily for homework and internet browsing.


eMachines T3882

2.8GHz Celeron D 335
80GB 7200RPM HDD
Intel extreme graphics2 w/ up to 96MB RAM
6 USB 2.0

plus I was wondering if the Home Premium version has support for Dual Core CPUs. since i think it will run on this system?

Home Premium PC specs:

Gateway FX510X
3.0GHz Pentium D 930
250GB 7200RPM HDD
nVidia GeForce 6600 up to 256MB (128MB dedicated, 128MB allocated)
7USB 2.0 3IEEE1394

will the FX510X handle the aero effects?


A:Vista Material?

For your emachines or any other PC you already have, go to ATI's website here and run the program to see if it is Vista ready.

2 more replies
Answer Match 43.26%

Hi guys n gals,
My computer is playing up, as when ever I get online I get a pop up to go to an adult site, followed by a barage of pop ups with adult material in it. I have uninstalled the "hotbar" that my partner had downloaded. I have ran the Adaware and Spybot which have "cleaned" it only to have it reappear when I reboot. I ran the Adaware and Spybot before running the Hijackthis program and the log file is as follows..... Somebody please help as kids cant use the computer with this stuff coming up. Thanks

Logfile of HijackThis v1.97.6
Scan saved at 10:52:21 AM, on 9/29/2004
Platform: Windows 2000 (WinNT 5.00.2195)
MSIE: Internet Explorer v5.00 (5.00.2920.0000)

Running processes:
C:\Documents and Settings\operator1\Application Data\c?lm?.exe
C:\Program Files\Intuit\QuickBooks Pro\Components\QBAgent\QBDAgent.exe
C:\Hijack THis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page =
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL =
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = file://C:\DOCUME~1\OPERAT~1\LOCALS~1\Temp\sp.html
R1 - HKLM\Software\Microsoft\Internet Explo... Read more

A:Adult pop up material - cant get rid of

That is a very old HJT get the latest one

1 more replies
Answer Match 43.26%

hi everyone does anybody here has selftest training kit for 70-290. If you could send me this kit, i would be very gratefull in return i could find you something usefull.

thanx in advance
e-mail: [email protected]

A:70-290 exam material !!!!

6 more replies
Answer Match 43.26%

I have an old green motherboard that I want to turn into something decorative for my office. I need to drill a 3/8" hole in it. I can't seem to figure out if its metal, plastic or what - want to get the right type of drill bit but should know what material I am drilling into.

Any ideas?

A:What is the material used in most motherboards?

Usually fiberglass with copper circuits.
Any standard drill bit should work as long as you don't push too hard.
Let the drill do the work.

2 more replies
Answer Match 43.26%

No i have some upgrades for my pc:
-750w psu
-12gb ddr2 ram
-Cooler Master HAF 912+ Midi Tower with 2x200 mm fans(1st is in take-front)
and side fan(intake) is 120mm noctua with filter.and back panel one 120mm fan(out).
2nd 200 fan is top(out)
And "problem" is-there is quite lot of dust in my midi tower(there is some kind of filter on front panel).have you any idea s for filter material? like my wife`s old nylon pants???
thank you...

A:filter material

Maybe something like this? PuraPC Computer Air Filter Material: Electronics

Do a local search for "pc case filter material"

A Guy

1 more replies
Answer Match 43.26%

Maybe this should be posted in XP or somewhere else but since I'm having the problem with McAfee I'll post here. When I get the McAfee Security screen, the bottom part of it, which I guess contains a button to start a scan, is off screen. Likewise, when I go to McAfee help, I get screens the bottom part of which are off screen. What can I do to get the whole screen to show? These are screen that don't have a maximize button. Thanks, grandaw7

More replies
Answer Match 42.42%

Dear Tech Guy(s):

I am running an HP Pavillion 6630, with WIN 98, Celeron Processor 500MHZ. CD-ROM 40X, CD-Burner HP8250I

I have been accessing a reference CD-ROM, which I own, that contains time sensitive technical data. Recently I have been LOCKED OUT, from accessing the data, and I would like to continue using it. I get a window telling me "The CD-ROM is dated May 2001 and you need to install an updated version."(Which I Don't Have)

I have tried completely uninstalling and reinstalling, the software, but this hasn't helped. I was also able to edit a couple of notepad files, on board the CD, entitled "Version" and "Volume", but that still didn't allow me access.

My Questions:
How can I continue to access this information? What files on board a CD of this nature, are usually responsible for allowing a computer, to identify its date? (The CD"s Date)

Any suggestions, or information on which files I need to access and edit will be greatly appreciated. Thank you!


A:Time Sensitive CD-ROM Material

16 more replies
Answer Match 42.42%

In 3ds Max, in Material editor when 6 x 4 slots fully fill then how to increase it.

A:Increase Material slots in max


This is all I can find on the material editor:

I have also found this in the newsgroups, very useful:

The Unofficial 3D Studio MAX FAQ


1 more replies
Answer Match 42.42%


I'm taking a course which needs Angular2, and the website is not possible to reach. I have a ZTE F668 ONT router, DIGI Hungary network provider. The router is able to ping the website with built in tool. Android devices on the local WiFi network can open the website. Windows devices cannot. Which are my PC with Windows 10 and a Samsung Series 9 on WiFi.

DNS servers are already set to NSLOOKUP returns the correct IP address. I can ping that IP address. The domain resolve does not work, and I have to use a webproxy to see the site. There are no known restrictions on my internet access, except that I don't have an IPv6 WAN address.

I have tried flushing DNS cache and other basic "quick fixes", they don't work. Hosts is empty. Windows firewall is empty, plus it doesn't work on other PC either. Antivirus is ESET NOD32, without firewall.

Hope you can help!

Additional info:


Non-authoritative answer:
Ping request could not find host Please check the name and try again.

C:\Windows\system32>ipconfig /displaydns

Windows IP Configuration
... Read more

More replies
Answer Match 42.42%

I want to be able to scan pages from a book and then paste them onto a document and edit them.  Is this possible?

A:Can I edit material I have scanned.

If you have office installed try 

OCR Using Microsoft OneNote 2007.
Also have a look here 
But decide what you require and what meet your needs ,  this is only a guide and the decision is yours to try them.
Hopefully other members may give their personal view and OCR apps they use , as i dont use any or have tried any.

3 more replies
Answer Match 42.42%

[size=6]Good Afternoon, Today I ordered a program through a company and downloaded it onto my computer. When I try to pull up the information all of the content except the first few lines appear to be in some kind of code. I've tried to change settings but I don't know how. Can anyone help me figure out how to change the settings? ThankyouWyona

A:I Cant Read Downloaded Material.

What Company and type of program is it?
What is your Operating System?
What is the extention on the file/program you are trying to open (.txt, .exe, .pdf, .inf,...?)?
What setting are you trying to change, and what are the settings for?

3 more replies
Answer Match 42.42%

My computer is used by all my family members even my cousins, i will not lie if i tell u it has been used for porn surfing, i just want to know if there is any software on the market that helps me do a cleanup for free. Thanks alot....

A:Cleaning my pc of porn material?

AdAware SE 1.05
SpyBot S&D 1.3

DL them (they are free), install them, check each for their
definition updates and then run AdAware and Spybot, fixing anything
they say.

In SpywareBlaster - Always enable all protection after updates
In SpyBot - After an update run immunize

Do these and reboot before the next step.

Then get HiJack This
And let it extract to its default folder , run it , DO NOT fix anything, post the
log here.
All are free, but it will take some time as there is some manual work to do!!!!!!

3 more replies
Answer Match 42.42%

Cogeco sent me an email saying that i am using a large amount of bandwidth quickly and that I may have a virus on my computer. I didnt really do anything to use up my bandwidth. i hardly downloaded anything and mostly i just watch streaming video. So I wasnt worried. a couple days later cogeco sent me another email saying the same thing. Then I got worried. So i did an online Panda active scan and so far it says that I have over 230 infected files. I am worried about the safety of my computer now. My Nortan 360 cant pick up anything but i have the feeling that my computer is getting a little slow. I would appreciate it if anyone can help me diagnose my computer and clean it up from all the problems. I will try to submit the results of the panda antivirus online scan. Please HELP!

A:harmful material may be on computer

Panda active scan is pretty good. I rely on it for a second opinion and do a monthly scan with it.

Is your machine up to date with Microsoft security patches? It is very important as recently there were many remote code execution bugs found. ( an attacker can remotely run / install anything )

3 more replies
Answer Match 42.42%

I was wondering if anyone has any good websites with good articles on pretty much anything computer/networking related. I am interested in learning more about general programming and office networking setups and troubleshooting.


A:Good Reference Material

Well, this site is the best place to start at There are some ...For Dummies books that could be helpful. Wikipedia is another one. Most of the information is correct.

I guess it will depend on what you want to do.

1 more replies
Answer Match 42.42%

Does anyone know where to find the latest training material on Windows 7? Study guides, etc....

A:Question about learning material.

Quote: Originally Posted by camerondad2003

Does anyone know where to find the latest training material on Windows 7? Study guides, etc....

Hi and welcome to SF

One good place to look is in the tutorial sections here. they are free well written and you can digest them one topic at a time. there are some good learning materials out there do you have a particular topic in mind?


5 more replies
Answer Match 42.42%

Hi there,

Anyone know of a software package that will generate a material list on contracting projects?



More replies
Answer Match 42.42%

Back again for your help. Today I tried to print out copies of some forms but when the print screen came up it was dark gray, not the usual white, and I could not check any of the needed copies, etc. The only thing different was that the forms required Acrobat Reader, whereas other copies I made did not require the Reader. Is this something usual when using Reader? If so, is there someway I can print copies when needed? My thanks, to you as usual.

A:(Solved) Printing material

16 more replies
Answer Match 42.42%

opps... I am putting together a celeron computer for somebody and when I was closing the clamp on the cpu... I accidentally touched the blue thermal stuff on the center with my thumb as the clamp went down. I only touched the dead center, so only a real little bit was touched... but should I go get some of that alluminum stuff to put on or should it be ok? I want to get this put together now and nobody that I know of sells it in town, so I may need to order it online.

A:thermal interface material

6 more replies
Answer Match 42.42%

I've been the sole administrator for mixed Windows Server environments (Server 2003-2012R2) for about a year or so now, have taken a couple Windows Server classes, one of which had a final that was the MTA Certification exam, the other was supposed to prep for MCSA 70-642 (but no class for 70-640...oddly enough), and feel like I'm ready to expand into and certify for at least an MCSA for Server 2012. Unfortunately, I haven't found much in the way of clear cut, use this resource to get your knowledge up to exam snuff. It's always, parts of this book or that book are good or use this site with this other site but ignore x on that site and use this book for x. Anybody have any solid resources they used to get theirs? I'm aware of the argument that the certs are useless and tend to create paper tigers but that's not my intent, I pride myself on being able to walk the walk and not just talk a big game. Also, if you know of any good lab resources that walk you through barney-style that's a big bonus too. I recently ordered a couple books and am awaiting their arrival, hopefully between the two it will get me where I need to be for the first exam. I prefer books to digital stuff as well...I tend to have a greater level of ADD when attempting to read digital, lol.

MCSA 70-410 Cert Guide R2: Installing and Configuring Windows Server 2012
Training Guide Installing and Configuring Windows Server 2012 R2

For what it's worth I nearly a... Read more

A:MCSA/E Prep Material

For my MCSA/MCSE for Server 2003 I did a lot of exam dumps... not the most honest way to pass, but it got my foot in the door for a future job at least.

You will have to find VCE software to use them, and don't take the answers as always 100% right. There have been many times I've found answers to be wrong, or incorrectly worded. But it's another good resource for sure.

I know they changed the MCSA/MCSE quite a bit (dropped it, named it MCITP, then named it back I guess?), so I don't know how much help those exam collections are now TBH. Worth looking into.

My best advice, get exam vouchers with free retakes if you fail! Those things saved my life on the 70-294 test.

15 more replies
Answer Match 42%

Hi all! I'm interesting what is the material of cooling system? Copper or aluminium? Can I use liquid metall thermal paste that is prohibited to use with aluminium thermal pipes? Did anyone use liquid metall for cooling system in any NITRO laptops?

A:VN7-592G cooling system material? Short answer: From my experience on 591G I can tell you it's copper. From the post above you can see that the user tom_R2E3 used the liquid pro on 592G, which means it has also copper heatsink and heatpipe. 

2 more replies
Answer Match 42%

I have an orphaned laptop, a Chicony MP 980, running Windows 98
Problem: No picture, just blank dark screen.

Preliminary diagnosis: Defective video card or problem with hard drive. Since early 2001, Chicony has stopped supporting all laptop models. No parts are available.

I have valuable material on the hard drive that I need to recover.

Any ideas on how I could do this? Please give easiest solutions first. I am not highly technical, so please keep it as simple and clear as possible.

Many thanks,


A:Recover Hard Drive Material

Moving to harware forum for better response.

3 more replies
Answer Match 42%

I'm sorry if my explanation is a little confusing, I had a long night and my grammar is terrible this morning. I'll answer any questions to the best of my ability.

I've been having a problem where pornographic videos are being downloaded while no one is using the computer. It's been happening for awhile now, I brushed it off though because when it had started I had Windows Vista installed as my OS which I knew I was going to upgrade with a clean install of Windows 7 soon. Now I have had Windows 7 for two weeks now and the same problem arose again on Tuesday (Nov 17). I've become frustrated with this after trying various methods to identify the problem and remove it myself, from having quite a bit of experience with Computers and Computer Security myself, but nothing came up. I've ran scans with AVG Free, looked through file directories, looked at the internet history of all Web Browsers etc. No Dice, everything looks normal.

The material being downloaded is always in .mpg format and is downloaded to this directory: C:\Users\Alec\Documents\Downloads

System Specifications:
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
BIOS: )Phoenix - Award WorkstationBIOS v6.00PG
Processor: AMD Phenom™ 9600 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 4096MB RAM
Available OS Memory: 2942MB RAM

Main Web Browser: Google Chrome (
Secondary Web Browser: Internet Explorer (8.0.7600.16... Read more

A:Pornographic Material being downloaded while computer is not in use

Hello and welcome to Bleeping Computer.Please subscribe to your topic so that you will be notified as soon as I post a reply, instead of you having to check the topic all of the time. This will allow you to get an email notification when I reply.To subscribe, go to your topic, and at the top right hand corner by your first post, click the Options button and then click Track this topic. The bullet the immediate notification bubble. Then press submit.Lets take a look with MalwarebytesPlease download Malwarebytes' Anti-Malware from here:MalwarebytesPlease rename the file BEFORE downloading to zztoy.exe instead of mbam-setup.exeMBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Double Click zztoy.exe to install the application.* Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.* If an update is found, it will download and install the latest version.* Once the program has loaded, select "Perform Full Scan", then click Scan.* The scan may take some time to finish,so please be patient.* When the scan is complete, click OK, then Show Results to view the results.* Make sure that everything is checked, and click Remove Selected.* When disinfection is completed, a log will open in Notepad and y... Read more

11 more replies
Answer Match 42%

Since I bought my Dell Dimension 8400 with Xp Media Center and my TV cable attached to my computer I have recorded many Movies etc. that are no doubt copywrited. Sometimes I rerecord recordings to DVD using Media Center to play on my larger TV screen. I never had a problem till recently on a very old not very popular movie which Media center refused to recopy to Dvd saying it was restricted. It had copied to my hard drive from the net but would not recopy to a DVD using Media Center saying it was copywright material. I have a special hard drive just for recorded material but it is more convienent to rerecord them to DVD and show them on my TV rather than using my smaller screen laptop to show them in other rooms via my network.( My wife is 87 and does not like my computer room). I have copied music in the past but generally they are songs for which I have records (78rpm)


More replies
Answer Match 42%

I guess I should have worded my thread differently because it was closed for reasons that were untrue.

I was not asking how to pirate DVD's, I know the rules, and I would never break them. I came here for legitimate help with a legal issue, not a question on how to steal.

My question as posted:

"Sonic DigitalMedia LE -while trying to copy- is not reading already copied dvd's, it keeps saying to insert a dvd into the drive. Apparently it will recognize cd's, and it can tell if there is a copyrighted dvd in the drive, but it pops out the already copied ones.

Any ideas?"
I was trying to find out what the problem is with a PC, or software. The software detects copyrighted material and then goes no further. (I do not wish answers on how to copy copyrighted DVD's.) It will not detect DVD's that are not protected, that is what I need the help with, the detection of non copyrighted material. Is it a drive or software issue?
Where do I start?

A:Can't read DVD Copies (not copyrighted material)

11 more replies
Answer Match 42%

I keep several thousand archive files of music. I no longer keep CD media, so I make FLAC files and then sell the CD's. I know its risky, but I try to take all precautions.

I installed a Vantec removable drive system (with switchable power and fan) to house my archive files. So far, I have filled 2 300GB drives and am working on a 3rd. The drives are never used to play music (I also keep a dedicated MP3 drive) and the drives are always turned off, when not in use. The extra drives are kept in a file cabinet.

Since these are my primary back-ups to my library, I'm curious to know of the life expectancy of a HD, under these conditions. I know its subjective, but should I take any other precautions to ensure data integrity.


A:HD Life Expectancy for archived material

7 more replies
Answer Match 42%

I recently bought the HP spectre 13. I would like to know what material is the bronze looking thing, because I got a stain on it that even aclohol cannot remove. (or even salt and lemon combination) Please see attached photo for the stain. was trying to look for the material, but different people are saying different things. Copper, Aluminum, Bronze and etc.I really do not know where I got the stain from, but this laptop is brand new and it would be a shame if that stays permanent,Thanks and regards,Jonathan

More replies
Answer Match 42%

I'm having a dickens of a time trying to create a new complex database for inventory control. Maybe someone out 'there' can help??

We buy a few parts and mfg them into an inventory product. We then sell that product along with a few other parts to make a completely new product. (It's sort of like Dell selling a computer....nothing is standard).

I need to track the incoming of each individual part as well as have them taken out of inventory when we make the first product, and then track the 'inventory' of the first and last product.

I have a great start and most of my database works but it isn't quite "right". What I mean by that is I thought I had my tables set up correctly but when I test queries and reports the information isn't coming out properly. I can upload a sample of what I'm working on to MediaFire if anyone is interested in assisting. Thanks a bunch

A:Bill of Material / Inventory Control

14 more replies
Answer Match 42%

Hi all! I'm interesting what is the material of cooling system? Copper or aluminium? Can I use liquid metall thermal paste that is prohibited to use with aluminium thermal pipes? Did anyone use liquid metall for cooling system in any NITRO laptops?

A:VN7-592G cooling system material? Short answer: From my experience on 591G I can tell you it's copper. From the post above you can see that the user tom_R2E3 used the liquid pro on 592G, which means it has also copper heatsink and heatpipe. 

2 more replies
Answer Match 42%

Hello everyone. I am a teacher in adult education. I am looking for material out there, exercises for my students to work on. Specifically Microsoft Word, Microsoft Excel, and Microsoft Powerpoint. I need beginner, intermediate, and advanced material. If any of you know of any good sites that provide this information (preferably free) I would greatly appreciate it. Thank you.

A:Anyone have teaching material for Microsoft Office

Take a look here


1 more replies
Answer Match 42%

I have installed REal Player twice. It seems to install fine, I see the box when I click on something to play, but it doesn't seem to be downloading anything. It shows 0 KB downloaded. I am not sure what the problem is nor how to troubleshoot it. any ideas?

A:Real Player not downloading material

Can we get some specs?

Real Player version
OS Version and SP level

5 more replies
Answer Match 42%

As Some of you may know (especially win2kpro) I have a Pentium D 935, Now i've got the overheating problem sorted. I noticed that as i had ran out of thermal Paste i did'nt have enough thermal Paste between my CPU and Heatsink.

I did'nt want to go through the whole process of puting on thermal paste myself and getting it wrong. So i was wondering that if i got a ne fan, would it come with the right amount of Thermal Paste?

The Fan In Question is this one:

Would It Come With Thermal Material Attatched to It?

A:Solved: Do All CPU Fans Come With Thermal Material?

16 more replies
Answer Match 42%

I am in serious need of the right material to repair a hairline crack in a laptop part…..just got this rare part from eBay vendor 4 as usual, 2 much money….he din see the crack. I did and must now decide between returning it or repairing it. Cause I Googled infinitely and get the polys these parts R apparently usually made of very hard to repair…..with anything conventional.

An adhesive vendor on ebay tells me this should work. I am not sure.

Has anyone had any experience with such things? This is another lappy I found in garbage way back….should have left this one, but now in FAR 2 deep re time invested over months…and money spent on parts to quit now.
Thanks much.

More Googling...I need to get this right and not waste more time/money on wut will not work. ("Measure twice, cut once." ) Just found this:
Edit 2;

Just saw this on that Canadian site:

6. Can Plastex be used on Polyethylene and Polypropylene?
While many customers have used Plastex with these materials, it was not specifically designed for that purpose

Blech. Took me long time to get to these parts R made of those...and the above from their FAQ section is vague. I hate vague.

A:Right Material For Plastic Part Repair??

16 more replies
Answer Match 42%

The 8.5x11 inch area of my scanner limits the size of the material I can scan. I would like to scan some old LP Album covers. In the past I was successful doing this with a (ScanMan) hand scanner. I made several passes of the source materiel and initiated a "stitching" feature. With a little care and a steady hand I achieved the desired results. Stitching doe not seem to be a feature with my Artec AS6U flatbed scanner. Does anyone have any recommendations short of buying a new scanner?

A:Scaning Large Source Material

8 more replies
Answer Match 42%

Ok, I have a question about applying the thermal interface material(artic silver 5, etc). I saw this pic of thermal paste, and I thought it looked like too much paste, am I right?

I thought you wanted a very thin layer, just enough to smooth out the irregularities of the cpu's and heatsink's surfaces.

A:Amd 939 thermal interface material application.

I would definately NOT put so much on where it is right up to the top edge of the die. You would risk some rubbing off and falling on your motherboard where it could short out. puke:

Other than that, it is fine.

I would leave a clean edge of about 2 to 3 mm all around the perimeter of the CPU die.

21 more replies
Answer Match 42%

I have Nerovision express and am using it to edit videos. The source material for these videos is in the c drive and needs to be moved the a new external drive I just installed. When I move the videos ans then open nero to try and edit my projects it can no longer find the source material because I moved it to the f drive.

What should I do? Is there a way to let Nero know to use the same videos from the f drive?

p.s. Does anyone use this software and if so what do you think of it?

More replies
Answer Match 41.58%

good afternoon to all
please, i ask for your kind help with some old videos i have to edit for some people from a local charity club
 unfortunately those videos are of low resolution and can be downloaded only from youtube since there no any source videos like vhs and hi8 cassettes
those videos are all in flv format but i really don't know at what format i have to download them prior any edit and rendering
there is no any copyright issues with those videos
those videos are from various club event's (festivals, live concerts, wine festival, weddings) from mid eighties since 1997
i do audio/video projects but frankly speaking i haven't done anything like before
i am working with sony vegas 8 with dvd architect 4, adobe audition 2 and motu digital performer for windows
from my experience even with video bit rates as low as 4750 kbits can give you a good video quality (sd video)  but if your video source is really good (dvcpro, dv, dvcam)
now, in my situation with those flv videos i do not know if a video bit rate like 4750 kbits would be sufficient
many thanks in advance

A:please, advice is needed for edit old video material for dvd

You can use a number of different downloaders/ download .flv files.  You have to read the instructions for using each downloader/converter to see what the possibilities are.
If you want to edit video files...what program do you intend to use for said editing?

5 more replies
Answer Match 41.58%

I'm helping (or attempting to) a student who is trying to paste a citation from ProQuest into a Word document. We tried pasting things into the document from other sources- likes random websites, and it works just fine. The item appears in the clipboard, so we know the item is there. What could be going on? Oh , and p.s. I tried it from my computer and it's working normally so I know that we're doing it right and that ProQuest is functioning fine too.

A:Pasting Problems- Material Won't Paste, Though it's in Clipboard

10 more replies
Answer Match 41.58%

my printer all the sudden stopped printing what is on the screen.Now when i push print off of an internet site my printer just prints out a long coded page.Like a website code.How do i correct this.

More replies
Answer Match 41.58%

im new to this forum, infact this is my first post
Hi all

im fairly new to 3d max and 3d modelling and animation
anyways 2 issues 1 has.

Issue 1:
i have a animation of a simple house, for windows i have box's with a material attached to it, the material being a pic of a window. only wen i attach the material to the object (the box) the box turns grey

i export it to windows media player only .
i do this by choosin

animation menu > make preview
output = .AVI
compressor = Microsoft Video 1
and then create

wen the animation is exported to windows media player the objects with materials attached to them are all grey, how do i fix this????

issue 2:

refairing back to issue 1, when i attach a material to a object, the object turns grey, is there no way i can make it so the material can be seen in perspective, top, front and left views instead of the object being grey ?

Thanks alot hope some 1 can help.

Ian M

More replies
Answer Match 41.58%

I have a 20g hard drive that I have been using as a boot drive using windows xp. The other day it quit booting up, I received a notice saying a file was corrupted and wouldn't even boot up into safe mode. So I reinstalled windows, I thought that I reformatted the whole drive but I didn't. I used Avast antivirus to do a boot scan and I could see that my files and pics I had are actually still on the drive. These are pics and files I use all the time and some are very old and I would like to retrieve them somehow. Is there a program that can do this or can I use command prompt and how do I do that? THese pics are family and friends and very important to me. Thanks Clay.

A:Solved: getting personal material off of a hard drive

10 more replies
Answer Match 41.58%

So I'm obviously on the internet right now, having no problems with my everyday use.

I am capable of downloading plug ins and updates, but as soon as I go to install those updates or plug ins and programs, it says that it can not be completed because I don't have an internet connection, it says a multitude of different things depending on what it is I'm trying to install, but is always saying that I don't have an internet connection, which I obviously do.

More replies
Answer Match 41.58%

Why I won't upgrade Windows 7 to Windows 10 (but Windows 8) - gHacks Tech News

More replies
Answer Match 41.16%

I have a new Logitech wireless keyboard|mouse combo, given to me as a present. Had it since xmas.
Finding that deleting stuff is becoming infuriating. Back-spacing, sometimes. Several other functions that won't come to mind because it's very early and I'm bloody old.
I figure it's something to do with one or other of these two when I find that I have to repeat the keystroke to achieve what I want to do. Especially delete ! - sometimes I have to go away from trying to delete an email, then return to it before I can be rid of it !
Also, I find the keyboard extraordinarily sensitive: before I had it, I never had problems as I now do with letters I didn't type appearing in my text. I mean, of course, that I didn't MEAN to type them: but my fingers must be brushing over them and the keyboard 'reads' them as never before.

A:Solved: Difficulty deleting material: keyboard ? mouse ?

I won a Logitech wireless keyboard and mouse combo quite a few years ago. I ended up hating the keyboard. I use only the wireless mouse and have for years.

Try using just the mouse and plug in your old keyboard. Life is too short (I'm a senior citizen) to be wasting time letting hardware frustrate you. Simply tell the gift giver, if asked, that you prefer your old keyboard.

3 more replies
Answer Match 41.16%

I have made very little use of photo editing software, so I'm not very knowledgeable at all about the extent of their capabilities. What I am seeking is a (free) photo editing program that will allow me to overlay or add different markings onto any digital picture such as text, pointer arrows, small icons or other types of indicators, etc. The one program I downloaded and installed, Picasa 3, does allow me to add text, but I cannot find a way to insert any other items.

Can anyone suggest some basic (free) photo editing/altering software that would allow me to add on or insert the kind of items I cited above onto digital images?

Thanks for looking.

A:Solved: Seeking software to add/insert material onto photos

8 more replies
Answer Match 41.16%


I have Windows XP and we upgraded our Media Player to the new Windows Media Player 9. Big mistake! It plays music and video files fine that I have stored on my hard drive, but it won't play any material from the internet. There is no uninstall for this version, so I'm stuck with it. Do you have any solutions as to how I can fix this problem?

Thanks a lot,

[email protected]

More replies
Answer Match 41.16%

Material Design is slowly coming to Chrome, take a peek
Google has planned to bring Material Design to Chrome for more than a year, but efforts to bring the design language to the browser have recently started accelerating.
According to a recently filed request on Google Code, it?s expected the first Material Design tweaks will appear in Chrome OS starting with version 50.
We?re able to get a look at the changes today, which are hidden behind a number of special flags as they?re unfinished, but almost complete.

The changes are fairly minimal at first glance, but the browser now uses square edges on tabs rather than rounded ones and ditches the ?hamburger? menu for three dots instead. The buttons animate when clicked using small explosions from under your mouse.

It also redesigns the infobars, security icon and bookmark buttons.

A design specification from Google Code also shows a preview of the new all-black incognito mode that?s part of the redesign but may change as it?s implemented.

Another design specification shows a preview of an updated media player planned for Chrome OS and implemented today.

A number of smaller changes are littered around the browser, such as improved scrolling bars, tweaked buttons, new icons and more.

There?s a number of other pages individually being redesigned by the Chrome team, including Downloads, Extensions, Settings and History. These have already made their way into the browser on Windows and Chrome OS, ... Read more

A:Material Design is slowly coming to Google Chrome

This is so very polished and minimal looking, it's tempting me to retry using Chrome as my main browser just for the UI.
Bravo Google.

1 more replies
Answer Match 41.16%

Howdy all, I was just wondering if any of you A+ or Network+ certified Technicians may know of a program or any websites that will help prepare a person "better" to take the A+ or Network+ Certifications from Comptia. I am currently working on the 2003 version of the A+ certification and actually went to take it finding that the material I had been studying, which was from Marcraft 2003 study cd, had hardly any useful or much related questions than what was on the actual exams. I had to pay full price for both the hardware and software and almost passed. Almost passed the Hardware if I had only gotten 9 more points which would have been just like 1 more question sigh, and almost the software but by 39 points or so. So I am a bit discouraged on taking again unless I can somehow find some updated study material for the 2003 version. If cannot, I will attempt to retake the hardware anyways once or twice more perhaps, but not sure about the Software or Operating Systems part. I came so close! Sigh. After I finally get the A+ certification or if I can at all , I will go for Network+, if not too late for that 2003 version as well. They are ending the A+ 2003 version at the end of either June or July I believe, so not sure about Network+'s older version, if that is still available to take. Well thanks for any info and hope to find something out. Oh yes, and it also might be a good idea, if anyone has any info as well on the current versions too, to post any links, f... Read more

More replies
Answer Match 40.74%

Intel Corporation today announced development of a new, ultra-fast, yet very low power prototype transistor using new materials that could form the basis of its microprocessors and other logic products beginning in the second half of the next decade.
Significant power reduction at the transistor level, accompanied by a substantial performance increase, could play a crucial role in delivering future platforms to computer users by allowing an increased number of features and capabilities. Considerably less energy used and heat generated could add significant battery life for mobile devices and increase opportunities for building smaller more powerful products.Click to expand...

More replies
Answer Match 40.74%

I'm finishing my last year as a self educated high school student, and I'm trying to learn as much as possible before this fall on my own. I'm looking for some free collage level networking research material, because I would rather teach my self and take a $75 test than spend $500- $1000 per class on something I could teach my self.

I would appreciate any links you can find, as I have had little luck searching!

A:free collage level networking research material needed

Well, yes and no. There's information online, but you're far better off getting some books. You're also going to want to buy some (used) equipment to build yourself a lab.

What are you trying to learn about networking? Are you looking to do a certificate program like CCENT, CCNA, or Network+?

1 more replies
Answer Match 40.32%

This is something that has been bugging me for a while now, and I've been unable to solve this problem. Perhaps someone out there can provide some guidance.

Sometimes, I'm unable to print things (such as online coupons) because I'm told that my printer is set to "Keep Printed Documents." I've tried disabling this setting via the Advanced tab under the printer's properties. However, when I do this, click Apply then OK, and close the tab, the setting automatically reverts back to "Keep Printed Documents". Does anyone know why this is happening? It's sort of frustrating to not be able to set the printer settings the way you choose.

I appreciate any tips/suggestions you might have. Thanks!


A:Keep Printed Documents

9 more replies
Answer Match 40.32%

How I can change the name that appears at the top of email messages when I print in Outlook 2002?

A:Name at top of printed emails

6 more replies
Answer Match 40.32%
A:Good site/referance material for game development within visual studio?

We are happy for you (lol)

2 more replies
Answer Match 39.9%

Whenever I print out an email from someone, the resulting document prints my first and last name (Outook Express) in the top left corner. I would like to orevent this but have searched in the Options and cannot find how it got there or how to permanently remove it. Can someone please tell me. Thank you.

A:My name on printed emails not wanted

It is using your user name for the header.
You can change this in the account settings.

Not sure if you can turn this off.

2 more replies
Answer Match 39.9%

Hello Team, When I am trying to select eqal (=) to button on which it is printed, it is not getting typed whereas when I am selecting some other button eqal (=) is getting printed. Please help me in solving this issue. Regards,Nizam

More replies
Answer Match 39.9%

I have Windows 98SE with a HP 842C Deskjet printer.
Does anyone know of any program that would allow me to see how many pages I have printed since the last ink refill?

A:Counting Printed Pages??


1 more replies
Answer Match 39.9%

Don't print much multi page output, so am NOT sure when this problem began.

Originally, the pages on my HP DJ855C were printed as expected: page-1 first, then page-2, etc; this resulted with page-1 being on the bottom of the stack. Depending on the application being used, there was often a Print-Order option available for Back-to-Front printing so that the last page would be printed first and then page-1 would be printed last and be on the top in the stacker.

NOW, things seem to have reversed:
If I do NOT ask for the Back-to-Front, then I seem to get it anyway (i.e., page-1 last and on the top). but if I want the original order (i.e., page-1 first and on the bottom) then I must use the Back-to-Front option.
It seems as though the default has become Back-to-Front and then selecting the option for Back-to-Front re-reverses the order and the result is Front-to-Back.

Possibly this reversal happened when I went to Win/XP; possibly it happened with the installation of some piece of software.

Q. Has anyone else had this exxperience?

Please tell me where I might change some parameter to make the option of Front-to-Back actually print the page-1 first like it did originally?

Any advice apprecaited.


A:Order of Pages Printed


Go into your printers and faxes options off of your start menu.

Select your printer, right click the mouse and click on printing preferences.
On the features tab at the bottom there is a option for start printing from last page. If there is a check mark in the box next to it, click there with the mouse and uncheck it and then click on apply and ok and you should be all set after that?

1 more replies
Answer Match 39.9%

hello all,
Im using access 2010 and there is a print of a report like a certificate whenever needed. My office is requesting me to provide a report of all certificate printed including the date and to whom .
my only way to do this is to force users to enter a field print (yes/no) and from there the query "yes" and the report be printed.
Is there any way to do this without forcing the user to enter the yes/no. field.

A:Try to record printed records

6 more replies
Answer Match 39.9%

I have 3 print queues that are retaining the printed jobs in the queue and every now and again the damn thing prints all the job again. I have checked that the keep printed jobs button is NOT checked/selected, but the queue acts ilke it is selected to keep printed jobs. I have 125 printer queues and only 3 act like this and they are set up identical to the others. I have reconfigured this twice on all 3 and they still act like they are set to keep printed jobs in the queue.

Anyone seen this and know of a solution, on the Microsoft site I am seeing posts but not a single reply about how to either run a job to clear them out a couple times a day or fix this so they act as configured. To NOT keep printed jobs in the queue.

Any help as always is much appreciated.

The race to solution is on, let's see who can figure this one out first.

A:printed job remain in queue

7 more replies
Answer Match 39.9%

When using my picture it! publishing....when I add a border to a picture it comes out distorted when I print them out. With no border it prints out great.

Any ideas why this is happening?

More replies
Answer Match 39.9%

when i tried to print photo from (user administrator)windows7 photo viewer there appear print picture windows without photo preview(seems busy) and after some seconds five repeated error messages "your picture cannot be printed because of this error occured" appear. It is working in user account Guest. printer and its driver is okay(updated). whats wrong with my windows 7 photo viewer? please help me

A:your picture can not be printed because of this error

From Windows Answers:

I believe it is a problem with the "photowiz.dll" file in system32. It is version 6.x.xxxx.xxxx. I found an older version of this file, had to change the attributes and permissions of the file to allow it to be changed. I renamed it with an "dlx" extension and then copied a version 5.1 photowiz.dll to system32 and the print wizard works again! The site I got the file from is:

Try Googling your problem first. Hope that helps

7 more replies
Answer Match 39.9%

I'm new here!

First I would like to say I'm a TBI survivor and I'm a male and 42 years old .
I was purchased an emachine computer with a Lexmark lasar printer,
Whenever I go to print something, be it a web site article or a personal document that was created using Microsoft Works Word Processor. Whatever is being printed my name appears at the VERY top and the city and state printed at the bottom.
I know little about computers so I'm trying to get an answer why this is being printed.
The only thing that I can come up with is MY NAME, CITY and STATE was somehow entered on this computer's Hard drive and is prints it because it's been entered by someone at the store before iyt was brought home and set up for me.

If there is someway that I can delete this info. being printed, PLESE tell me what to do EXACTLY!

Thank You!

A:I'm new her! Why is my name, town and state being printed?

That's very strange, it sounds like a 'Header and Footer' has been set up with that info and is in your template. (If Works uses such a template, I know Word does).
Try doing a Find (or Search depending on your version of Windows) for and rename any found to normal.old. Then test the printing again. If there is a problem you change the names back again.


3 more replies
Answer Match 39.9%

Hi all,

Well not sure if this is the right area for this but not really sure what the problem is.

When I boot my PC during the bootup dos stage I hear my PC making noises, it still boots up Windows 7 ok but as soon as I open something I get continious R type accross my screen, If I hit the caps lock it changes from R to r.

Thought it was my keyboard having the R locked down so tried to fix it, no luck. Changed keyboards with my spare one no luck. Disconnect all keyboards no luck.

So where is this R coming from, its impossible to us my PC at the moment as soon as you click somewhere (word, exel, Google etc) an R/r appears.

Any ideas where to start?

A:Continous R being printed in Windows 7

8 more replies
Answer Match 39.9%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?


A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:


When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"

I love Myriam the little bunny

1 more replies
Answer Match 39.9%

I am unable to print pictures completely. I print them from Picasa on HP photosmart C4250. When I try to print, although the preview is correct, the printed result is not. Part of a picture will come out, or the image starts at the end of the paper and is therefore incomplete. Until now, everything worked properly.


More replies
Answer Match 39.9%

Other than dogging the print preview, and struggling with the size in any pertinent image editing software, has anyone found a reliable way to limit or control the size of a printed web document?
to wit:
I scanned an odd shaped document, 3x8" to email to myself at another site, and the printed form was big enough for two pages. What a waste.
I print receipts regularly and they, 99% of the time have a "trailer" on a last page that has stuff like web site address or URL, a Secure Website emblem, or other, clearly unnecessary printing. My introduction to Windows word processing (WordPerfect) had, and I still use, a "makeitfit" command. Invoking such a command AUTOMATICALLY when printing from the web seems like a simple, brainless way to conserve'll give me a fractional font (e.g. 11.9 vs. a 12) and would prevent the idiotic tendency of a printed page to only have the leftward 80%, l which leaves off the important stuff like the prices...(you gotta print landscape to avoid this)
And I thought a computer was to make life easier, boy was I ever misled)

A:printed size of web documents

The problem is that web pages are usually coded to make them look good on screen, and that tends to make them "unfriendly" when printing.

Web pages designed for printing do exist, and it works well in those (few) cases.

Cutting and pasting into a word processor is sometimes the only workable solution.

2 more replies
Answer Match 39.9%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/

A:Scanned document when printed out........

16 more replies
Answer Match 39.9%

The problem I am having is that when I go to print tax return forms from the IRS site or New York Tax Dept site, the form prints "short", that is, the last four or five lines of each page do not print.

You cannot save the data in these forms, they will only save as a blank form. Your only option is to print it.

However, although Adobe tells how to cure this problem ( by clicking File-Print and going down the menu which comes up to "printer scaling", then chosing "print to fit page", this only works if there is a
FILE menu on the left hand side of the page.

In these tax sites, the forms do not have a tool bar above allowing you to chose a FILE menu.
You can right click the mouse and chose PRINT, however it will print a cut off page.

SOOOOOOO do I either:
1. Get a standard Tool Bar to appear on top of the form, on these web site pages, or
2. use some other device or method to print these documents to fit the page.

If any of you are about to suggest right clicking on the printer icon PRINTERS, in the control panel, forget printer does not bring up anything about "Print Scaling".

Hopefully, some geek out there will read this and solve my problem. Thank you. 44 Guy

A:printed pages cut off at bottom

Every computerized tax form that I have available at the website of the sponsoring governmental agency...and reflects a printed version option which has resulted in everything being printed properly.

I'm not sure where Adobe figures into tax preparation.

If you are using a 3d-party app to do taxes...then the problem resides with the support for that application, IMO.


4 more replies
Answer Match 39.9%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?

A:Solved: Printed name on paper

16 more replies
Answer Match 39.9%

My Toshiba satellite c650d seems to have power...the on button is green. The screen is black, the numbers and caps lock lights are on and wont go off. The disk drive makes the usual booting up noise but that is all she does. Ive unplugged and removed the battery and that did nothing. I cant even turn it off with the on/off button to remove that battery and then turn it on again. I removed and reinserted the memory (both) and I can't take the hard drive out, its held in by a screw. Is my "friend" dead?

A:toshiba satelite c650d caps lock light, number lock is on an

If, as it sounds, it is booting up but not ever displaying anything on the screen, check the cable between the motherboard and the screen. It might just be one of the connectors (at either end) has worked loose. With the computer well booted up, move the screen gently down to nearly closed. If you ever see anything on the screen then it could be the cable is faulty where it hinges.Always pop back and let us know the outcome - thanks

2 more replies