Tech Problem Aggregator

No sound in DVD video when burning it using Nero Vision Essentials (Nero 9)

Q: No sound in DVD video when burning it using Nero Vision Essentials (Nero 9)

I am using a laptop that is a HP Pavilion dv4 Notebook PC.
The OS being used is the 64-bit Windows 7 Home Premium.
I am trying to burn a DVD video file (.vob file) to a DVD disc using Nero Vision Essentials (Nero 9).
After importing the file into the project, I played the video and found that it has no sound.
As a result, when I have successfully burned it to a DVD disc and played this disc on my DVD player, it has also no sound.
Please help me fix this problem!

More replies
Answer Match 89.1%

Hi guys.

I am using nero vision 5 essentials se to burn media to dvd-r disks.

The program will burn the media fine until it gets to the very last bit. Then it will come up witha pop up saying the burn process has failed.

Any ideas on what this could be?

Any help will be appreciated!

Many thanks.


A:Nero Vision 5 Essentials SE Help

I installed Nero Essentials on my new PC a few weeks ago. It was the free software I received in the boxes with my DVD drives. It would seem to be burning, but really it was not doing anything. I uninstalled Nero and installed good old Roxio creator and it works beautifully. I am not a fan of Nero at all. I know this doesn't help get Nero working but you now know others have the same problem with it.

1 more replies
Answer Match 85.2%

Hey everyone,

I have had Nero Vision 4 for a little over a month now. I created a DVD on Nero with 14 chapters then when I go to burn it, it shuts off after chapter 1 before it ever gets to burning the disk. This also happens when trying to save to the Image Recorder so it doesn't have anything to do with the disk burner. Has anyone else experienced this or know how to correct it? I wrote to Nero's support well over a week ago and have yet to get a response.

Any advice would be much appreciated.

A:Nero Vision 4 DVD burning question

Have you updated to the latest version from Ahead's site?

1 more replies
Answer Match 85.2%

right here we go!::-i have had the nero 7 software suite bout a year now. and it was working fine uptill just before christmas.. now i can not burn any of my blank dvd's using nero vision ,
Here's what happens:- i put a brand new blank dvd + rw or -rw into the dvd rewiter and make the appropriate menus and buttons then i always preveiw the avi before burning!! then i go to my computer and set my dvd /rw drive to enable cd writing on that drive.. then start the burn!!! then i usaully leave the dvd to burn while i do other things. but when i come back to the pc to see if it has burned ok .the whole process has been completed but has froze , and i can not abort or click on any of the nero links or buttons .. so i have to either reset or shutdown the pc to return to normal
has anyone had the same problem or knows what has happened ??
any querys would be gratefully recieved ..
thank you . tony

More replies
Answer Match 85.2%

I need to get new software for my external HP CD-RW drive because my ancient version of Adaptec Easy CD Creator isnt compatible with XP.
I looked into Roxio's Easy CD Creator 6 but see that a lot of ppl are having problems with it & XP.
So I am nixing that one.

What does everyone think of Nero?
Is this one any good? - Nero 5.9 & Vision Express DVD/CD Burning 5.5.9


A:Nero 5.9 & Vision Express DVD/CD Burning 5.5.9 ?

No one knows about this software?

1 more replies
Answer Match 84.3%

Hi ,
I've downloaded nero recently and tried to burn a random video by using nero vision (to watch it on a dvd player played on tv). Everything was running fine, but for some reason, after the system put everything on temporary files (or something like that), the dvd came out, without anything on it (skipping step 2, which means the system didn't burn). So when I put it back into the computer (hoping the process would keep on ), there was instead an error message that popped out, saying that the burning failed, along with an error log (attached to this tread).

Of course, this message didn't mean anything to me. So please, if anyone understands it and know how I can fix this problem, it would be really helpful and appreciated. Thanks!

A:[Nero Vision] Burning failed + Log detail??

13 more replies
Answer Match 84.3%

Hello. I have just finished making my dvd-video in nero vision, but when I go to burn it the following message appears:
There is not enough space available for the recording process.
There are 851mb available for temporary files in the folder C:DOCUME~1/Josh/LOCALS~1/Temp, but the recording process will need approximately 2684mb.

Which means I can't burn it, what do I have to do to fix this?

Help greatly appreciated. Thanks for reading.

A:Nero Vision - Not Enough Space For The Burning Process

How much space do you have left on your hard disk?

6 more replies
Answer Match 84.3%

I use windows XP and am trying to burn a dvd video from files stored on my computer. Everything seemed to be going well but at the end the disc did not work and an error message came up "The instruction at 0x00605886 refered memory at 0x1492160. The memory could not be "read"".
Can someone please tell me what this means and how I can fix it?? I am using Nero Powerpack - Nero Vision Express and despite it saying it is very easy to use - I am finding it very difficult!!! Thanks

A:burning error - Nero Vision express

I am using NERO Express which came with my Pioneer CD/DVD burner. It gets all the way to the end of the process and then seems not to complete. It says that the burn was successful and then gives me a Data not verified message.

I know this is not a solution, but maybe there is better burning software than Nero which seems to be VERY user unfriendly. The documentation that I have been able to find has been minimal and not very helpful.

All burned up!

1 more replies
Answer Match 84.3%

I am trying to burn a movie to a DVD with Nero Vision Essentials The video part looks OK but the audio is all messed up. It crackles, stutters, and skips continuously. The problem is present when preview playing the clip within Nero before the burn and also after it is burned. I tried using both a Windows Media File and a Movie Clip file to no avail (both clips play fine with WMP). I figured when I bought a DVD drive burning a DVD would be pretty simple...not so it seems.

So far I have tried shutting off the Nero SmartEncoding and downloading a codec tweak tool to shut off all the Nero Audio codecs....but neither has worked.

I have also tried burning the files with DeepBurner but the problem is still there....although it is not as bad???? Weird.

A:Audio problems when burning DVD with Nero Vision

6 more replies
Answer Match 84.3%

Hey all,

When trying to burn my finished Nero Photo Slideshow to a DVD, I got the following error message:

"Unable to prepare data for recording: prepare session failed: Transcoding of videos failed"

Followed by another error saying:

"Burn process Failed!"

and then gives me the option to save an error log, which I have. I took a look at it and to be honest couldnt get much sense from it.

Anyone else experienced the same problem? Im not sure whether its hardware or software related, as my DVD writer might not be up to scratch as it is new :|

Cheers for any help

A:Nero Vision Express 3 - DVD Burning Problem

8 more replies
Answer Match 83.4%

When I try to burn a AVI file with nero it is starting to fail during the encoding process. I never used to have this problem, but it has started all of a sudden. I tried burning the file twice, but had the same problem each time. I am trying to burn the files to my harddrive, because burning them to a DVD using this program always fails. Do you know how to solve this. Here is the burn log I received ( I put the part with the error in bold). I have to divide the log in halfdue to it's size, so it'll be spread over two posts.

[22:28:36] NeroVision Log created (Date: 02/14/2005)
[22:28:36] NeroVision Processors: 1 (Intel)
[22:28:36] NeroVision OS: Windows Windows XP
[22:28:38] GCCore Detected DirectX Version: 9.0c
[22:28:38] GCHW Node added: AMD K7 Processor
[22:28:38] GCHW Node added: ACPI Fixed Feature Button
[22:28:38] GCHW Node added: Programmable interrupt controller
[22:28:38] GCHW Node added: System timer
[22:28:38] GCHW Node added: Direct memory access controller
[22:28:38] GCHW Node added: Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
[22:28:38] GCHW Node added: Printer Port
[22:28:38] GCHW Node added: Communications Port
[22:28:38] GCHW Node added: Standard floppy disk controller
[22:28:38] GCHW Node added: System speaker
[22:28:38] GCHW Node added: PCI bus
[22:28:38] GCHW Node added: System CMOS/real time clock
[22:28:38] GCHW Node added: System board
[22:28:38] GCHW Node added: Motherboard resources
[22:28:38] GCHW Node added: Motherboard resour... Read more

A:Error burning AVI files with nero vision express 3

[00:38:58] NeroVision 0x4F680000 5.3.2600.2180 C:\WINDOWS\system32\dxdiagn.dll
[00:38:58] NeroVision 0x58010000 5.3.2600.2180 C:\WINDOWS\system32\
[00:38:58] NeroVision 0x5AD70000 6.0.2900.2180 C:\WINDOWS\system32\UxTheme.dll
[00:38:58] NeroVision 0x5B860000 5.1.2600.2180 C:\WINDOWS\system32\NETAPI32.dll
[00:38:58] NeroVision 0x5E030000 5.3.2600.2180 C:\WINDOWS\system32\
[00:38:58] NeroVision 0x5E760000 5.1.2600.2180 C:\WINDOWS\system32\perfos.dll
[00:38:58] NeroVision 0x5EDD0000 5.1.2600.2180 C:\WINDOWS\system32\OLEPRO32.DLL
[00:38:58] NeroVision 0x60CA0000 6.5.2600.2180 C:\WINDOWS\system32\qedit.dll
[00:38:58] NeroVision 0x629C0000 5.1.2600.2180 C:\WINDOWS\system32\LPK.DLL
[00:38:58] NeroVision 0x71AA0000 5.1.2600.2180 C:\WINDOWS\system32\WS2HELP.dll
[00:38:58] NeroVision 0x71AB0000 5.1.2600.2180 C:\WINDOWS\system32\WS2_32.dll
[00:38:58] NeroVision 0x72280000 5.3.2600.2180 C:\WINDOWS\system32\DINPUT.dll
[00:38:58] NeroVision 0x72D10000 5.1.2600.0 C:\WINDOWS\system32\msacm32.drv
[00:38:58] NeroVision 0x72D20000 5.1.2600.2180 C:\WINDOWS\system32\wdmaud.drv
[00:38:58] NeroVision 0x73000000 5.1.2600.2180 C:\WINDOWS\system32\WINSPOOL.DRV
[00:38:58] NeroVision 0x732E0000 5.1.2600.0 C:\WINDOWS\system32\RICHED32.DLL
[00:38:58] NeroVision 0x736B0000 6.5.2600.2180 C:\WINDOWS\system32\msdmo.dll
[00:38:58] NeroVision 0x73760000 5.3.2600.2180 C:\WINDOWS\system32\... Read more

3 more replies
Answer Match 83.4%

I wanted to burn some video files mpg format and I aded it in to nero vision express and it started burning. I had 24 files it was like 2 gig's Five minutes after I got the error message that it cant burn it and I saved the log if that can halp

More replies
Answer Match 81.9%

Hello, everyone.

I attempted to burn a video file onto a DVD, with Nero Express. However, the software only allows either bup, vob or ifo files. After googling such terms on the web, I came across several forums/communities and whatnot, where people kept saying that Nero Vision is required, in order to convert the files you want, into bup, vob or ifo (I have absolutely zero clue as to why the company behind Nero didn't include Nero Vision in Nero 12's software suite. Because without it, Nero Express is totally useless. But I digress)

I jumped on Nero Vision, but was told by the software that my project could only fit into a DVD-9.

Question 1: I have burnable DVDs for 120 min/4.7gb. Doesn't that mean that even if my project exceeds 120 minutes in length, if it still doesn't exceed the size limit, it's supposed to work? What on earth is a DVD-9, anyways?

Question 2: If you can just power on Nero Vision and immediately get your original file and burn it, why does Nero Express require all this bup, vob, ifo nonsense???

Question 3: What are the major differences between immediately burning your original file onto a DVD, and converting that into the required bup, vob and ifo formats?

Question 4: How would I go about doing that with Nero Vision?

EDIT: Realized that the only way to burn past that time limit (120 min)(My file exceeds 2 hours in length) is to decrease its quality, which I do not want to do. So I should go with the vob, bup, ifo stuff, ri... Read more

A:Nero Express. Nero Vision. DVD File structures!?

16 more replies
Answer Match 80.4%

My problem is that I simply cannot get Nero to record video and sound from the TV card. The TV plays fine in Windows Media player, so I know that is working. I can sometimes get the picture to show up in Nero, but never the sound. When I try to record the video all I get is a still image. I know it is a setup problem of some kind, but for the life of me I canít get it to work. When I try to play TV through Nero I get a blank screen, and a thousand setting adjustments donít help. During setup it finds all of the channels so it is at least seeing the signal. Do you have any ideas? System information is in my profile.

More replies
Answer Match 78.9%

Anyone know how I can add something (codec?) to my Nero Vision Express 3 DVD burning software so it will allow transcoding and burning of video files with the file extension .asx? It can burn .mpeg, .avi, .wmv, but not .asx.

The Nero web site seems confusing and I can't find anything there.

A:.asx video files for Nero Vision Express 3


1 more replies
Answer Match 105.84%

Whats better on XP?Nero Expressor Nero 7 EssentialsPlease tell me the differences,what they do and what not?Edit: Moved topic to the more appropriate forum. ~ Animal

A:Whats Better? Nero Express Or Nero 7 Essentials?

"Better" in what way?

Nero Express doesn't bore users who only want to burn...who do not want the entire Nero suite installed (includes burning, backup, etc.) installed on the system.

CD/DVD drives normally only include Nero Express with the drives.

I'm still using Nero 6.6 so I have no clue about Nero 7 Essentials, but I'm sure there is plenty of info at the Nero website on it.


2 more replies
Answer Match 104.58%

When i click on Nero Burning ROM, it does not open at all. All that happens is i get a windows error report telling me that nero.exe encountered a problem. I have succesfully used this many times before, but one day it just stopped working.

Any idea of what is wrong?

A:Nero 7 Ultra Edition - Cannot start Nero Burning ROM

A simple uninstall and install might help.

2 more replies
Answer Match 102.48%

Nero 2015 Classic/Nero Platinum 2015/Nero Burning ROM 2015 - released

Nero just now released NEW Versions for 2015:
1.Nero 2015 Classic
2.Nero Platinum 2015
3.Nero Burning ROM 2015
5.Nero Video 2015

Download Nero 2015 from this page:

Download offline:
1.Nero Platinium Retail Setup,
2.Content Pack from Nero 2015,


More replies
Answer Match 100.8%

I would like to burn dvd movies to cd, however being such large files like 700mb it says that there is insufficient space on blank cd. How can I use 2 cd's instead of 1? I know this has been done but don't know how to do it. Any help is appreciated.
Thanks, Neesh

A:burning video cd's - Nero

well, if its 700mb, 700mb cd-rs do exist, so u can try 1 of those. NOTE: if ur burner is a little older, it might not support/recognize 700mb cd's. also, there are programs that can split ur video files into 2 parts. i think there might be a program called AV split or smething that does it. i'd search here: for progs. u might want to try and type in video files, or av split, or split, or something like that. and i also have a program, called peck's power join, which can take the 2 parts and combine them again if u want. i dunno the url for it, but search for it on google or something. k, hope this helps

3 more replies
Answer Match 99.54%

Hi Guys,
Wondering if anyone can help me, Im trying to burn a video disk (mpeg) using nero 6, I add the file I want to burn, and the disc burns to cd no worries, But when I play it back in my dvd player, all I get is a small square to the midle left side of my screen, and it doesnt play, Can anyone shed some light here to what im doing wrong ??
I have previously burned these files using nero 5, and they have always worked, is there someting I am doing wrong with this version ???


A:burning video disc using nero

Are you recoding the file at all? Try re-encoding the file with TMPGenc before burning. You can check for tutorials.

1 more replies
Answer Match 99.54%

I am operating Nero Video burning software but cannot get a compatible dvd from it.
What can I do?

A:Nero Video Burning software

Why, and compatible to what?

2 more replies
Answer Match 95.76%

I've been trying to burn my .avi file using nero vision. It burns the video part all right but when i use it in a DVD player i get no sound, but when i use it on my computer, the sound works fine. How do i get them to burn with sound?


More replies
Answer Match 95.76%

Hey guys and gals...
I am trying to burn some clips (avi) to Dvd. I tried using Nero vision (came with Nero 7 ultra ed The problem lies when I see how large the movie is it says it's over 4.7GB but in the folder the clips are in it says it's only 2.? GB. NOw nero automatically adjusts the quality to fit the dvd for me. Does changing the avi to vob make the files larger? Also when I try to burn using Nero vision even when it decreases the quality it still says that the file is too large to put on reg 4.8GB dvd and to insert a new one that will fit it. Help please.

A:avi to dvd using nero vision

The end size in Nero depends on the length, in minutes X bitrate, of your source... not the size of it.

If Nero's auto resize doesn't do it you can set the bitrate yourself till it fits. Look under 'More'-> DVD Video and choose 'Custom' then change the bitrate, the default is usually 5073, to something smaller.

You can use this to determine the bitrate:

1 more replies
Answer Match 95.76%

I have a Sony Handycam (tape) and I want to capture it using Nero Vision and then burn it so that I could watch it on a tv using a dvd player. Problem is..the video I capture is choppy and the audio is out of sync compared to when I watch it on the handycam. I tried to lower the quality but it's still there.

A:Nero Vision Help~!

What are your system specs? In what video format are you initially capturing to your hard drive?

1 more replies
Answer Match 95.76%

I have dvd's of my sons football games. I need to send video of him punting to coaches. Can someone give me steps that I can understand for making a video from several different videos? I know how to download and burn, and I printed the manual from, but I don't understand it.

A:nero vision

The first question is does nero vision support multiple timelines for more then 1 movie clip?

If not I would suggest finding a program that does support this will make the process much easier on you being able to load all your clips up on seperate timelines and move them around and edit and such.

I know adove after affects is great for this type of thing but is pricy, I would suggest doing a search for video editing software if nero vision does not support this.

1 more replies
Answer Match 95.76%

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 6007 Mb
Graphics Card: Intel(R) HD Graphics, -1316 Mb
Hard Drives: C: Total - 940454 MB, Free - 734586 MB; E: Total - 238472 MB, Free - 1003 MB;
Motherboard: Gateway, H57M01, , U01K100502750
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled

when I try to open Nero Vision it gives me an error Nero Vision has experienced a serious problem and must close immediately.. I started a slideshow there saved it and I can't get back. I can't start a new one. I've rebooted I've tryed to recover but something stops it Help! This is a slide show of my g-sons football games.

A:Nero Vision 10

I would suggest uninstalling Nero, rebooting, and then install again.

2 more replies
Answer Match 95.76%

I was using Nero 7 ( nerovision 4) to convert AVI's to DVD format without any problems.
Then a friend recommended trying WinAVI as the conversion time was much quicker.
I tried this and it worked but I was unhappy with the quality and went back to using Nero.
since then ( or it may be just coincedence ??) I have been getting various problems with failed conversions !!! ( codec problems ??)
I read on other forums that winAVI can cause conflicts etc. with other programs so I uninstalled it and updated my codec pack. ( K-lite megacodecs )
Nero now works 50% of the time but sometimes crashes ( just closes ) or sometimes comes up with a dialog box ;-

NEROVISION.exe Application Error
the instruction at "0x00348d9e" referenced memory at "0x015238c8".
the memory could not be "read"
Click on OK to terminate the program.
is this a codec related issue ??
it does this during the transcoding phase and does not reach the write phase.

I have also tried reinstalling Nero but its still the same !!
thanks in advance for any help !!

I can give copy of the log created on here if it would help anyone diagnosing the problem ?
here is an extract of the log ending which I think is the problem part of the log but I'm unsure what it means !!

"[16:55:32] DVDEngine DVDEngineXceptFilter(): Caught SEH Exception 0xc0000005
[16:55:32] DVDEngine DVDEngineXceptFilter(): Exception was raised from C:\Program Files\Nero\Nero 7\Nero Vision\GCLib.dll at RVA 0... Read more

More replies
Answer Match 95.76%

hi folks i have been into computers for a while and have seen that there is a few things i havent got to grips with
i have just had this new drive that has been writing data to no problem but i went to convert a film i had downloaded for the kids and it will not burn or whatever to a disk
i have a log file for any techs to read because i cant make any sence of it this is a whole new world but it seems realy interesting

thanks in advance anyone who can help

7\Nero Vision\GCFX.DLL
[05:48:55] NeroVision 0x04270000 C:\Program Files\Nero\Nero 7\Nero Vision\ExpressDoc.dll
[05:48:55] NeroVision 0x04460000 C:\Program Files\Nero\Nero 7\Nero Vision\NeroVideoFX.dll
[05:48:55] NeroVision 0x04690000 C:\Program Files\Nero\Nero 7\Nero Vision\ExpressUI.dll
[05:48:55] NeroVision 0x04A50000 C:\Program Files\Nero\Nero 7\Nero Vision\NeVideoFX.dll
[05:48:55] NeroVision 0x05410000 C:\Program Files\Nero\Nero 7\Nero Vision\NeroMediaCon.DLL
[05:48:55] NeroVision 0x05780000 C:\Program Files\Common Files\Ahead\Lib\NeroFileDialog.dll
[05:48:55] NeroVision 0x05DC0000 7.10.3077.0 C:\Program Files\Common Files\Ahead\Lib\MFC71U.DLL
[05:48:55] NeroVision 0x062D0000 C:\Program Files\Common Files\Ahead\Lib\BCGCBPRO800u.dll
[05:48:55] NeroVision 0x065D0000 C:\Program Files\Common Files\Ahead\Lib\NeroPreview.dll
[05:48:55] NeroVision 0x06CD0000 C:\Program Files\Common Files\Ahead\Lib\
[05:48:55] NeroVision 0x07060000 4.... Read more

A:nero vision 4

[05:48:55] NeroVision CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 0 ID 0 DMA: Off
[05:48:55] NeroVision DiskPeripheral : SAMSUNG SP0411N atapi Port 1 ID 0 DMA: On Click to expand...

This should be set to on.

When converting with Nero Vision will it complete the conversion? Save to a Folder (on your hard drive), instead of going straight to a disc burn.

3 more replies
Answer Match 94.5%

Hi there,

I created a slide show of my photos to put on CD so I can play them on my DVD player. I've never used the program before so I haven't a clue what I am doing. So far I have only succeeded in burning the main menu to disc. Can someone please give me some guidance on how to get the whole slide show onto a CD?

A:Nero Express Vision 3.....need help

1 more replies
Answer Match 94.5%

I have a question for any Nero experts. I made a movie out of four video segments using Nero Vision in NTSC mode, but only the first one has functioning audio. The final three are silent, and only the video works properly. I can't find anything that was done differently on any of the four clips, and don't understand why the final three don't have any audio. Any ideas?

A:Nero Vision Problem

What kind of files types are they?

3 more replies
Answer Match 94.5%

I just moved my Hauppauge WinTV-PVR-350 board from an AMD XP pc to a new Vista32 Intel C2Q one. I had my source connected via exact same s-video and LR stereo y-splitter. I use used WinTVCapStart on XP and everything captured perfectly. WinTV2000 also seemed to work. On the new box WinTV2000 records no signal. Nero 8 Ultra's Vision records video perfectly, but the audio is silent. I used defaults, including Dolby AC-3 2.0 for audio, choice. Behind my pc is a real mess so checking the entire wire path is something I'd rather not do ever. The end connections are as on the XP box.

The log of an unsuccessfull, regards audio, record are below :

It would be greatly appreciated if anybody can help me out.
[20:40:50] NeroVision Log created (Date: 08/30/2008)
[20:40:51] NeroVision Processors: 4 (Intel)
[20:40:51] NeroVision OS: Windows Vista Home Premium Edition
[20:40:52] GCCore Detected DirectX Version 9 or higher
[20:40:54] GCCore Detected DirectX Version: 10.0
[20:40:55] AMCUIBase Loading standard buttons from 'C:\Program Files\Nero\Nero8\Nero Vision\Buttons'...
[20:40:55] AMCDocBase Nero3D interface version is 500
[20:40:56] ExpressUI Running Nero Vision Version:
[20:40:57] NeroVision INFO BD - Running BDEngine FileVersion: ProductVersion:
[20:40:57] NeroVision INFO BD - InitializeEngine: NeroAPIGlue module ( attached
[20:40:57] NeroVision INFO BD - Running BDEngine FileVersion: ProductVersion:
[20:40:57] N... Read more

A:Nero 8 Vision PVR function.

I just noticed that there are both video and audio device property configure icons on the right of the Vision dialog box. The video icon is in color and can be clicked. The audio icon is in grey and cannot be clicked.

2 more replies
Answer Match 94.5%

Just regestered a version of Nero . I am trying to convert from avi over to an ISO file.
In the Nero start smart I can't find the Icon make you're own DVD movie. It was In the earlier versions?. Did they rename the startup icon or something?. Has anyone else had this problem??? Please help!!

signed operator_120

A:Nero Vision 4 Problems?????

yea, i had that problem too, seems nero just integrated it into the software, so instead of having 2 menu's they just have 1, simply select "Copy Disk" option, and when u go to burn, select "Image Recorder" as your burn device, so it won't matter what type of disk ur trying to go to.

alternativly, i have found that nero 7 platnum and nve4 leave alot to be desired as far as actually preforming every time the first time, you see how many updates came with nero 6 ultra eh, "nero vision express 2 became nero vision express 3, new dvd support etc...".

So i would just go back to nero 6 ultra edition with all the latest patches/codec packs and nero vision express 3 with all the latest patches/codecs.

However, i currently have some mp4 video format seasons of some of my fav shows, and nve3 isn't working really... something to think about.....

1 more replies
Answer Match 94.5%

Hi ppl!

I've got this problem wid Nero Vision 4. I try to burn any video file on to a DVD and it gives me this transcoding error and I'm unable to do anything about it.
Here is the error log:
[09:29:39] NeroVision Log created (Date: 04/24/2009)
[09:29:41] NeroVision Processors: 2 (Intel)
[09:29:41] NeroVision OS: Unsupported
[09:29:41] GCCore Detected DirectX Version 9 or higher
[09:29:43] ExpressUI Running Nero Vision Version:
[09:29:43] GCCore Detected DirectX Version: 10.0
[09:30:07] DVDEngine Product Version:, File Version:, Interface Version:
[09:30:07] DVDEngine Product Version:, File Version:, Interface Version:
[09:30:07] DVDEngine Product Version:, File Version:, Interface Version:
[09:30:07] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[09:30:07] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
[09:30:07] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterApplicationService
[09:30:07] DVDEngine ..Application service reg... Read more

More replies
Answer Match 94.5%

Hi all

I'm writing this on behalf of my Dad who's having a very peculiar problem with Nero Vision 4. When the program opens there is NO 'Make DVD' option. He's tried two free versions and the same prob with both.

He's running Vista Home Premium - is this what's wrong?

Any guidance will be much appreciated, thanks.

A:Nero Vision 4 problems

Did he download the full trial from Nero?

2 more replies
Answer Match 94.5%

Has anyone had a problem with nero vision? I have been trying to make a slide show but it gets about half way done and gives me an error message. Some of the times when am working with nero vision it just quits and I have to start over or go back to the point it was saved to. Anyone?

A:Problem with nero vision?

I don't do complicated rendering stuff with nero
it does converting ok it does iso images ok
loads a virtual drive ok
oh ya makes nice Case covers thats it and for the cost thats fine with me
it came with the dvdrw I bought
when doing more important tasks like that, I use dvdlab pro or vegas

your issue could be anything from a nero reinstall to your G card to more memory
if you have incd installed remove it its loaded with bugs

3 more replies
Answer Match 94.5%

After re-installing Windows xp and Nero 7, Nero cuts out when transcoding a video file. Sometimes it just stops, other times it freezes and twice I have received the message:
The instruction at "0x0052f1e4" referenced memory at "0x00000004". The memory could not be "read".
I had no problem with the same version of Nero before.

A:Nero Vision Crashes

Welcome to Tech Guy Forum

1 person's solution

How I found it."0x0052f1e4"&ei=UTF-8&fr=moz2

Another thread with the same problem.

Same problem with a different solution.


1 more replies
Answer Match 94.5%

This SHOULD qualify as "Newbie question of the Year".

I (think/hope) I've just used Nero Vision to transfer AVI to an MPEG. Nero is asking where I want to burn the file to. Want to burn to CD so I can play on my DVD player. Which of the two presets offered will do this:


A:Nero Vision Question

Are you trying to make a VCD or SVCD? Does your standalone play these?

Maybe this tutorial will help.

1 more replies
Answer Match 93.66%

Hi, I recorded the presidential inauguration in DTV, and tried to create a DVD from it. I used Nero Vision and when I first tried to load my file, I received some message about needing a dolby digital 5.1 plug-in. I just clicked okay and moved on... I used to be able to play the file in Windows Media Player, but now I get no sound and I don't know what happened. I know my sound is not off as other programs I use still make sounds. The file looks the same size as before trying to mess with it in Nero. I don't think I accidently changed the original file, as I was just intending to create a DVD and not chane the file. I use Windows XP Home, an AMD Phenom X3, 2GB of RAM, 320 Gig SATA hdd, an hdcp compliant Geforce 9400 card, etc..

Please help!

A:Nero Vision Messed Up My File

Perhaps you are missing some codecs that render the sound on that file. Download and install the K-lite codec pack and see if WMP will play the file with sound after that.

1 more replies
Answer Match 93.66%

Thanks in advance for any replies.
When using it to encode & burn it hangs. Countdown on remaining in the total progress bar stops but the elapsed time on the same bar keeps counting down.
Any ideas?
BTW, task manager reports it as running.



More replies
Answer Match 93.66%

Hi there, each time i burn a movie with nero vision the newly converted file seems to automatically save somewhere on my pc (unless i'm imagining things). I was wondering if anyone knows where i can this folder? I've looked everywhere that i can think of.

Thanks, Dave.

A:Solved: nero vision issue

Have you tried searching using the windows search tool? Or looked in the Nero Vision documentation?

3 more replies
Answer Match 93.66%


I am trying to install NVE and it keeps failing after installing neroPhotosnap, never getting to the Vision Express portion.

What can I do to get around this, I really don't care about neroPhotosnap, its vision express that I want.


A:Can not install Nero Vision Express

Can you do a CUSTOM install, bypassing the PhotoSnap?

Also, Nero has the unpleasant habit of refusing next attempts if one fails, unless you completely remove the failed installation from registry as well!

3 more replies
Answer Match 93.66%

i wanted to burn an avi file using nero vision as DVD, but when i finished all the customized configuration from the buttons and the like and press write button, it prompts a transcoding error, here is the log file, please do analyze this one and tell me how to solve the problem: btw, i can't watch the video on my pc bcoz when i do, my pc hangs and doesn't respond anymore, i tried playing other avi files and it worked well, this one avi file has a problem, i don't know what and how to, i even tried all the players installed on my pc but none seemed to work. ok back to the log file:

A:nero vision transcoding error

Search for "dvd flick", a FREE burning programs that will burn AVI to DVD. It's just basic stuff, but it works, and it's faster than Nero.

1 more replies
Answer Match 93.66%

Everytime I try to use Nero Vision 4 (Part of Nero 7) to burn a homebrew DVD (just some music videos, but it does it with any video files I try to burn) it hangs on this:
I have no idea on what's going on It's version

More replies
Answer Match 93.66%

Can anyone tell me how to encode and burn anime with tmpgenc xpress as fast as nero vision express? It takes nero about 1 1/2 hour to encode and burn a 6 episode project, and 5 hours for tmpgenc just to ecode it.

Or is there another program that can encode as fast as nero?

More replies
Answer Match 93.66%

i am running version of nero vision express on my rather ancient 950mhz amd system, with 512 of sdram on a win2k os.
the problem i have is that after loading any avi file into the project window i cant create chapters either manually (freezes every time) or by auto generation (freezes at around 7-50%) i've set the sensitivity to minimum.
on the one occasion the auto creation reached 100% after i clicked generate the program failed to respond!!!!
i've uninstalled, used nero cleaning tools as well as ran the program with and without "end it all" shutting down all unnecessary backround programs.
does anyone have any tips.Thanks

A:Nero Vision Express Problem

could there be an error in the avi files? if so how can i check the avi file for this...

1 more replies
Answer Match 93.66%


First a little history.

The whole of Nero 10 worked in the past, but....

I recently had an XP disaster, which could not be resolved by repairing XP, so I went for the install XP option, expecting it to kill the old and overwrite with the new.

That resulted in me now having a choice of the old damaged one or the new one every time I boot.

I mention this only because it may be relevant, although at a later date I may well raise a new thread asking if anyone knows how to delete the old one without a total start from scratch.

Since installing the new XP I've had to re-install most applications including Nero 10.

When I try to open the part that I use most (Nero Vision 10) I get the message "Nero Vision has experienced a serious problem and must close immediately". This also happens opening Nero Media Hub and Nero Backitup 10, but Nero Burning ROM and Nero Startsmart both open OK.

I've dug around Google and this seems to be a standard message covering pretty much every Nero inadequacy, but although there seems to be useful suggestions for fixing some of the problems that occur when it's running, there's nothing I can find to help with my problem. apparently one person was told by Nero to reformat the drive, re-install XP and try again!!!!

I've tried uninstalling and reinstalling Nero twice and the result is the same. What's really annoying is that it used to work.

Does anyone have any helpful suggestions please.

 ... Read more

A:Problem starting Nero Vision 10

Did you install all 100+ Windows XP updates including Service Pack 3?

2 more replies
Answer Match 93.66%


I've just upgraded my computer to a newer one, and have installed Nero 7 Premium, which worked without any problems on my old PC.

Everything works well now apart from VISION. For example if I go to the Smart Centre and select Create your own DVD, it goes away as if to load VISION, but after a few moments the Smart Centre just re-appears.

I've tried to run Vision from the C: drive, but again after a few moments of egg timer, nothing happens.

I have removed Nero- performed various registry scans and re-installed Nero. All to no avail. Out of all the features of Nero, Vision is the one I make best use of.

The version I am using is

Any help/ideas are most welcome


More replies
Answer Match 93.66%

I use Windows XP.

I have been using Nero Vision 4 for some time to convert films to DVD. I have found recently found that the last 5-10 mins of the films are missing on the DVD. Everything else is perfect, I do not get any error messages, and you only know the end of the film is missing when you try to watch the DVD! I have uninstalled Nero 7 and reinstalled it, but it is still the same.

I would be really grateful if anyone could help me.

Thank you. Julie.

A:Nero Vision 4 problems converting to DVD


2 more replies
Answer Match 92.4%

Greetings all.

About a year ago I made a home movie of a family vacation using a trial copy of Nero Vision. The disc I burned with it recently broke, and I was trying to make another copy when I realized, of course, the 30 day trial had expired some time ago. Since NV will no longer allow even prior made projects to be burned w/o purchasing the program (I'm not inclined to buy programs I've only used once in 1+ years ), I've began exporting the videos out of it.

Since the export function still works in NV, I've been able to export the videos themselves from the old project, but I cannot find a way to export the homemade DVD menus out. Does anyone have any experience with this, or know of another program than can read/import NV menus? I've also tried updating NV to the latest version (v5), but it still sees that the trial has expired so I'm stuck in the same boat.

Thanks for any help anyone can provide.

More replies
Answer Match 92.4%

I just bought the Blu-ray plug in for Nero Ultra 8. When using Nero Vision 5, I'm getting a few errors...they are unable to prepare data for recording;prepare session failed, transcode od video failed. I was using VOB files encoded with DTS...I want to use this program because it creates a menu and creates chapters...anyone else have this problem and know of a solution?? Thanks a lot!!

More replies
Answer Match 92.4%

Ok I'm using nero because my other authoring program won't open avi files which is dumb, but anyways I only want to add one video clip that is about an hour or so. I make chapters for it and then i proceed to the menus. The problem is that it only makes one menu that has all of the chapters on it well seperate pages but same menu. What i want is a main menu and then a seperate menu for the chapters. What do i have to do to make it do this. I can add the clip twice and then it makes a main menu and another menu but then its to long for the cd and i don't want it on there twice anyways. I figure it has something to do with that though. Hopefully someone uses Nero and can tell.
Thanks for the help​
Oh one other question the other program I use is Ulead DVD MovieFactory 3 SE with it or nero is it possible to make menus where you click on the word instead of a button or the picture of the video to make it play or go to the chapter section. Like i want to make it look like a professional dvd does with a background and whatever and the the words play, scence selection, etc. Is that possible?

More replies
Answer Match 92.4%

I just got a new DVD RW drive (Toshiba 16x Internal, in case it helps) that came with Nero OEM Suite 3. After installation, I tried to burn a video DVD with Vision Express, but when the burning starts, it only runs for about two minutes before it seemingly stops. The clock on the Total Running time continues to run, but none of the Remaining Time clocks change at all, and neither does the Current running time. I've left it running for quite a while, and nothing seems to change. Any thoughts? Thanks in advance.

A:Nero Vision Express stops suddenly...

D'oh, I feel kinda dumb. I downloaded/installed the latest version, and after some initial error messages, I got it to work just fine. My bad, I guess!

1 more replies
Answer Match 92.4%

Hello friends!

I have a few DVD's in which I have all my Home Video's. Now as there are quite a lot of DVD's scattered here and there having video's of 500 MB to 1 GB, I wanted to put in multiple video's in a single DVD so that it would be easier for me to manage. Therefore I copied all those DVD's to my HDD in the format they were in the DVD, i.e. in VOB format.

After that I needed to add a menu for all these video's. I tried Nero Recode and found it to be pretty simple when it comes to adding multiple video's and creating a menu. The only problem was in the last part where it writes to a DVD. I think it again encodes the whole movie and if this actually happens, I am sure to loose some quality of my Video's.

As I am not compressing any of my Video's nor am I adding more video's than what a DVD can accomodate, there is no logic of re-encoding the movie again.

Can anyone please tell me weather Nero Recode actually re-encodes the whole movie again even if it can easily fit in one DVD without any problem. If it does, is there a way to stop it? Moreover, if this cannot be stopped, is there any other good software that can help me to create menu's withour re-encoding my video's.

Please dont recommend me DVDLab as it is too complicated. I tried TMPG but it doesn't support subtitles. I need a software that can import VOB files and should support subtitles.

Thank you.

A:Doubt related to Nero Recode / Vision 4 ???

Chaange the extension on the VOB's to .mpg and use g-spot to identify the resolution and bitrates

Don't know much about recode but most authoring/encoding software worrks like this. Reencode the video to whatever you have picked in the settings. Or if your video is all the same bitrates and resolutions it will leave them alone if the settings you have picked match the video or worse case is you have video that has varying bitrates and resolutions.

In the worse case you need authoring software that supports mutltiple VTS. In the consumer spectrum there's only two that I'm aware, DVD Lab Pro (about $250 with the Multi VTS feature) and Ulead DVD Workshop about $500. Those prices are guesstimates... BTW DVD Workshop is comparable in features to DVD Lab Pro but is much easier to use, probably one of the easiest apps on the market to use. Also comes with a mpeg encoder and AC3 audio and few other things that DVD Lab does not have.

Check the bitrates and resolutions see if they differ if they do I'm afraid you're stuck without authoring software that will do that. If they are the same then there is more than one way to skin a cat and I'll provide some info.

1 more replies
Answer Match 92.4%

have been playing around with this program as it came bundled with my new dvd/cd-rom, have an avi file that is 711mb & i want to edit it so that it will burn 2 a standard cdr. can nero do this? have read the tutorial from their website, & others but still can't seem 2 get the file size down 2 below 700mb. i also have sonic mydvd & it does have the option to "trim" video 2 whatever size u want... was just curious if nero just can't? thx!

A:Solved: nero vision express 3 & avi files

I guess you could trim it in VirtualDub.

2 more replies
Answer Match 91.98%

I get a great picture, but no sound when using video capture to transfer VHS tapes to DVD. I use DAZZLE DVC 80 as my capture device which does not experience this problem when using PINNACLE Studio 8 so I know it works and cables are connected properly. My machine is a P4 2.4 with a gig of ram and I have all the current Nero patches.

A:NERO 6 Video Capture (No Sound)


2 more replies
Answer Match 91.56%

I have Windows XP
I made a DVD using Nero Vision 4>>>>I loaded in digital photos in chronological sequence to make a DVD.>>>>>the slide show on the DVD shows the digital photos in the reverse order>>>>>how do I fix this????

More replies
Answer Match 91.56%

I don't know if this is a common problem/error or somehow it just pertains to me!

I have converted an AVI file to DVD using Winavi but when I burn to a DVD disc using Nero Vision, some of the scenes video does not match the audio. In fact the audio is from a totally different scene.

If I burn the DVD in 'basic Nero Burning ROM' mode, by adding files to a 'compilation', the DVD burns perfectly but obviously without a menu or chapters.

I would love to use Nero Vision to enable me to add titles and chapters, so why is this happening?


A:Nero Vision - When DVD is burned, some scenes do not synch with the audio

10 more replies
Answer Match 91.56%

I just bought a new dvd burner 2 days ago since my other Sony DVD RW 810 was on the fritz after 2 1/2 years. Well, my recent purchase, a Sony DVD RW DRU 190A is now giving me problems only while using Nero Vision Express 3. When starting a new project, I insert brand new disks, I get the error: "This disk is not writable". Therefore, the program is not recognizing the media type. I have uninstalled, reinstalled, cleanly several times to no avail. I have used another of my dvd burning programs with no trouble, burned a cd with no trouble as well with Nero! just NeroVisionExpress 3 is being a pain. The new drive which is set to master, is showing as a DVD-RAM drive which I thought was a bit peculiar, but not entirely sure. I like Nero Vision Express 3 and would like to continue using it. Any help would be greatly appreciated.

A:Solved: DVD burner issues w/ Nero Vision Express 3

Well, I've resolved the issue on my own. If anyone else ever has a similar problem, make sure that you have the latest InCD plugin for your version of Nero.

1 more replies
Answer Match 90.72%

When I use Nero Vision Express 3.1 and use avi file.
The text fonts of the title of the file are so small I can't hardls see them even I tried all the fonts and make it bold/. It is still too small to see.

Is there a way of maing the font titles of the video files larger so that they easier to see ?


A:Nero Vision Express 3.1 title font of file small

In the menu template, go to the Customize tab and you can change the Font here.

1 more replies
Answer Match 87.36%

Nero Burning ROM crashed during burning and now my DVD drive is unusable. I cannot open the drive, I cannot shut down the computer because it says "Waiting for DVD Drive D:" and the drive runs like it is still burning despite the program doing the burning is no longer open. It isn't even in any process. What can I do to make the drive stop?

A:Nero Burning ROM crashing caused perpetual burning from DVD Drive

Go to Task Manager...shut the system down from there.
Turn system off....hard shutdown if necessary...disconnect the optical drive.
Sounds to me like it's a hardware problem moreso than a software problem if you cannot manually open the drive.

1 more replies
Answer Match 87.36%

I have an OEM version of Nero 7 Essentials (from Fujitsu Siemens) running on my Windows Vista Home Basic based Fujitsu Siemens Esprimo laptop. It has an Optiarc DVD RW drive, and I was wondering how I could burn videos from my Panasonic mini-DV camera onto a DVD-R or RW. I can get the videos onto my computer just fine, but if I put them into Windows Movie Maker or Nero, I only get the chance to burn a VCD.

I'd prefer not to pay for any more software, so if I need to I'll manage with VCDs, but I would prefer DVDs.


A:Nero 7 Essentials


6 more replies
Answer Match 87.36%

Hi. I've a question:
Is there a way to create movie DVD's with menus so that a normal DVD player can play all the files in the desired order?

A:Nero Essentials 8

I mean, Essentials 7

1 more replies
Answer Match 87.36%

A while ago I bought a copy of this software mainly to copy DVDs I had made onto my computer where I could edit them and write new DVDs.
The software was working fine for 30 days then it would no longer do what I wanted to. A message stated I would have to buy a plug-in for it to work again.
The problem is that when I followed the links in the software to the Nero site several different plug-ins were offered and I don't know which one I need.
Can anyone tell me the right one to buy?
Incidentally, I bought another copy of the installation CD thinking that I could carry out the task I wished to do within the 30 day period but this new copy immediately came up with the message that the trial period had expired. Obviously something is hanging about inside my computer from the original installation even though I had removed the programme. How can I get rid of this?

A:Nero 7 essentials

7 more replies
Answer Match 86.52%

some nero burning user veteran??problem burning cdr ,dvdrs.i cant burn a cdr.with windows media player is posible.also i use clone dvd with sucess. with nero is posible to erase a cdr-w.the problem is i cant record a cdr.when it comes to 3% to 8% the program tell "the burn failed"some advice?thanks for the attention

A:some nero burning user veteran??problem burning...

I am a "Nero Veteran", war veteran, etc.. etc.. The reason your having problems is simple. Some discs cannot be copied, as they may be copy protected or contain errors. If you are unsure if your disc can be copied,
run a trial in the "simulation" mode. Click on "More" at the bottom of the page and select "Simulation".

1 more replies
Answer Match 86.52%

I previously had Nero 5.5 installed on my PC and have a number of CD's that were burned in 5.5. These Cd's still have a lot of space left on them. I have recently upgraded to Nero 7 Essentials Suite 1. Can I use these Cd's to burn multisessions with Nero 7 Essentials? If I can, please give me an "How to". Communicating with Nero Tech Support is an agonizing process.

A:Nero 7 Essentials Suite 1

Is there even a multisession setting in Essentials? That is a very stripped-down version that is basically just Nero Express and no Nero full.

3 more replies
Answer Match 86.52%

My sister gave me a gift a new Toshiba Satellite Laptop and together with it was a bundled OS and Toshiba Softwares. They used the laptops and I believe they installed this Nero Essentials 8 on my laptop. Unfortunately when I got hold of my Laptop the software was installed and seems that it's not running well so i decide to uninstall it. But when I run it is not uninstalling and says that there is a corrupt database and could not remove it. Is there some other way I could remove it?

A:Uninstalling Nero Essentials 8

Nero removal tool look at this thread

2 more replies
Answer Match 86.52%

Hi guys...

got the original of Nero 7 Essentials with my DVD burner. I can burn DVD's and stuff just fine, the only problem is that as long as Nero is installed on my PC I cannot watch any kind of Video file, eg. avi's etc. If, for say, I want to watch some X-Files I open the Episode in Winamp oder WinMedPl but it won't start playing... I can use the bar to zoom through the episode and see the picture at that moment in time, but just won't play... until I de-install Nero.

Any idea's how I can get both to work at the same time?


More replies
Answer Match 86.52%

6-12 Months ago I backed up documents and music onto 13 dvd discs.with Nero 8's ,BackItUp 3
Now when I try to retrieve the backup it just tells me,'This application has requested the runtime to terminate it in an unusual way'
When I try to close the window it freezes up
I have tried on both my laptop (Win7) and my PC (Win XP)
The original backup was done with Win XP on the PC
I have recently reinstalled Nero 8 on both PC and Laptop
A recent external H/Drive failure has left me desperate there is close to 45 Gigabytes of music that I
cannot afford to lose
Please HELP

More replies
Answer Match 85.26%

... Having a problem and so I thought OK I will simply uninstall the NERO 7 Essentials, clean my pc and simply start again. Not too complicated even for me. BUT,,,

I just can not get Nero out of my Add/Remove window.

I went to search and found all sorts of Nero apps going back long before I ever installed this version. I took out everything that said Nero. But again, it's showing up in Add/Remove and looks like it's taken quite a bit of space as well.

Any HELP sure appreciated.

A:Solved: Nero 7 essentials, can not uninstall

Go here, download and run the Nero 7 CleanTool.

3 more replies
Answer Match 85.26%

I recently did some live audio recording of a lecture using my computer [something I have done many times]- but this time had unexpected results. When I went to burn the session to CDs, although I had filled out the tags with the proper information- each CD, when played back, displayed the title as "The Color of Magic" disc 2, and the artist is listed as Terry Pratchett. I discovered that is actually a movie written by Mr Pratchett- but have no idea of how it became associated with the original audio material I recorded.

My machine is Windows XP, the software I was recording with is "Total Recorder Pro", and the burning software is Nero Essentials that came with the CD burner (v.

I have run Malwarebytes Antimalware and see no problems reported.

Your thoughts would be much appreciated

More replies
Answer Match 85.26%

I have been trying now for about three months now to remove Nero from my computer and I keep getting the same message " shellmanager database is corrupt or missing"... I have googled how to remove and still not gone, Can anyone help me with my problem??? TIA ...


A:[SOLVED] remove Nero 7 essentials

use the nero tool

4 more replies
Answer Match 85.26%

This Nero burner program came w/ my Cannon scanner 5-6 years ago. Have used it many times during that time. But now I get message saying that a "30 day trial version of MPEG 2 video encoder has expired"! A DVD-multichannel video plug-in is now required to make the program function. After all these years?? Whats up with that?? Is there a better burner program (more intuitive, simpler to use, less expensive) that Nero? Many thanks for your help!

A:Nero Express Essentials problem.

Maybe check the date and time on your computer--it can cause odd problems like that if its not at least current to the present year.

What sort of project or projects do you use Nero for? There are many competent and free programs for almost everything Nero does but they would be gathered from different sources depending on the need. If its just burning then CDBurnerXP, if its to encode a video into MPEG-2 (DVD), DVDFlick.

1 more replies
Answer Match 85.26%

Vista Home Premium - pre-installed. Dell Inspiron E1750 17" Notebook. 1GB Mem.
7 Days old - virtually no sites visited so no knowledgable infections.
What happened?
I installed Nero 7 after removing Roxio, since it is a preferred program for burning. I got the usual incompatibility message before installing but knew Nero had an update so I allowed it to install.

However, the installer fell over part way through and displayed a cryptic message saying that the installer stopped working and must close. Now, Nero is registered in the add/remove programs dialogue but does not show up under installed programs in the start menu. I tried to uninstall what had been installed but kept getting the same windows installer message as it fell over and over again with the same task.

I tried seeing if there was an available Windows update for Vista but there was not.

Do you feel the Nero update may work??..I don't want to F%%K the system up as i know it is already fragile and bug worthy.

Thanks for your help and assistance.

A:Nero Essentials 7 Giving Me Hell

Nero crashed on the Vista machine at work today - I wouldn't trust it until a Vista patch is released by Nero.

6 more replies
Answer Match 85.26%

I am currently using Nero Essentials for my MP3 burning.

1. My file size is HUGE. A 5 minute song converted to a 53 mg file. My player is an 8 gb, but two CD's maxed out the remainder of my space. I understand the higher bit rate = largter file, as well as length of song. How do I get my file size smaller? The bit rate shows as 1411.

If there is no "fix" what isa better program to use?

I was using MusicMatch prior to this program

I like good audio for sure, but my MP3 player could use smaller file sizes...

More replies
Answer Match 85.26%

Trying to install NERO 7 ESSENTIALS but it won't let me. it cannot complete the installation and shuts off before completion. it worked fine on windows xp, but not on my new windows vista home premium 64 bit system. help.

A:Error installing NERO 7 Essentials

Hi drtime0909. . .

Welcome to the Tech Support Forum - Vista Support!

I have found that aspects of Nero 7 may not be fully compatible with Vista x64 - at least according to their system requirements, found HERE. Although it indicates that it is compatible with exceptions, note the area under "DirectX 9.0c" - required - but it does not say "or later"... such as is said for IE6.

Looking at the system requirements for Nero 8 found HERE, you will notice the phrase "DirectX 9.0c or better" - Vista runs under DirectX 10.

Whether or not this subtle difference is causing the problems for you is unknown to me at this time.

I would suggest that you check WERcon out to see if incompatibility is listed:
? Problem Reports and Solutions:
START | type wercon.exe into the Start Search box | right-click on wercon.exe that appears up top | select Run as Administrator | view "See Problems to Check'.

However, there is a plug-in that may or may not work for you and it costs USD $24.99 - but be wary. You can find this information HERE.

Good Luck to you.

Regards. . .


1 more replies
Answer Match 85.26%

does anybody here know how to COMPLETLEY remove all traces of anything to do with Nero 7? I bought a Philips DVD player, and it came with Nero 7 essentials, but only a trials version (something it doesn't tell you when you buy the DVD drive, among other reasons, i would recommend to anyone not to buy a Philips DVD Drive), and I have a full version to install, but when i uninstall the trial, and install the full version, it still asks me to buy the full version, which i already have, but i stupidly installed the trial version first. I have eben into the registry, and dleted anything that i thought might have something to dow ith Nero, but obviously I am missing something, but can't find what it would be. Any ideas guys?

oh for the record, I am running Vista home basic 64.


A:Completely Removing Nero 7 Essentials

You might want to give Nero Clean Tool Bundle a try.

4 more replies
Answer Match 85.26%

I would like to know how do I get pass the error message I keep getting when I try and install Nero 7 Essential. It keeps on telling me that it is an incorrect serial number please re enter it. Can this be use for windows XP Pro

Can some one please help me with this.

A:Nero 7 Essentials Serial Number

6 more replies
Answer Match 85.26%

After repeated tries, I have been unable to uninstall Nero 7 Essentials. Near the end of the process I get this message from Vista: Custom Action Dll crashed on last call in function Nerodg_UnregisterComEx. The installer must now exit. Crash Thread ID2752. Current Thread ID692. Any clues anybody?

A:Problems uninstalling Nero 7 Essentials

Try this tool Nero Uninstaller.

4 more replies
Answer Match 85.26%

When trying to install Nero 7 Essentials in my Windows Vista Home Premium desktop, it advises that DirectX 9.0c needs to be updated before the install process can continue.

According to the DirectX main window when I run "dxdiag.exe", it shows DirectX 10(6.00.6000.16386) as already being installed. Because of this, I aborted the Nero install process.

Is anyone aware of this, and is it okay to allow DirectX 9.0c to be updated?


A:Solved: A Question About Nero 7 Essentials

I suggest you download the tutorial how to install Nero in Vista this is in pdf format. You may need an Adobe Reader to view the manual.

2 more replies
Answer Match 83.58%


I'm using Nero, and when I tried to burn a .avi format movie into VCD, The encoding video part took about 3hrs to complete, anyone knows why and how to solve it?


A:Nero Burning Rom

It's gonna take a while, especially on an 833, to encode from what is probably a divx file to vcd. When I do it sometimes it can take an hour or two as well.

Have you done much video encoding in the past? It's not a fast process by any means. I built my last machine with 2 purposes; to encode SVCDs and to play games. I keep the machine very clean - no crap - no antivirus - nothing. Not even an Office application. It still takes me 5 to 6 hours to encode a full movie to SVCD. I don't think anything is broken - it's just what you're gonna get till machines get faster.


6 more replies
Answer Match 83.58%

I am trying to burn a CD on Nero and it keeps giving me an error that says "writer error"......this did not happen before, so i'm a little confused. Can anyone help me please, thanks.

This is my error log:


Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=, size=160016 bytes, created 12/16/2003 5:18:06 PM
Nero version: (Nero Express)
Recorder: <AOPEN DUW1608/ARR> Version: A04b - HA 1 TA 0 -
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AOPEN DUW1608/ARR >Version: A04b - HA 1 TA 0 -
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 759MB (777752kB)
Free physical memory: 45MB (46984kB)
Mem... Read more

A:Nero Burning Help!

Welcome to TechSpot

oiler_girl said:

CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 0 DMA: OffClick to expand...

You need to turn DMA on on that drive.

To do that, right-click My Computer on the desktop, select Properties, Hardware tab, Device Manager. Doubleclick on "Secondary IDE Channel" on "IDE ATA/ATAPI controllers", then Advanced Settings tab. Set the "Transfer Mode" to "DMA if available".

See the attached image for more help.

3 more replies
Answer Match 83.58%

having diffculty installing nero5 burning rom keep getting this error message
INTERNAL ERROR 2254, CLASS what is this?
i am using windows me o/s with an nec 40*speed writer nr-9100
the problem occurs when nero installer checks for system settings.
i have run nero5 before but once it failed to respond so i uninstalled nero5 problem started when i tried to reinstall the software i have been trying to install a new graphics card nvidia gforce4 but my syatem wouldnt accept the card had problems with nero5 since this.
i have an athlon amd k6-2 processor

A:nero burning rom


For your problem, please describe exactly when it happens, which OS do you run, which CD burner do you have, which Nero version and at which stage do you get the error please.

2 more replies
Answer Match 83.58%

Hi, one day i installed nero on my com hearing it was the easiest and best to use for burning home movies vcd's mg files whatever u wanna call em anyway i installed it and burnt a mpg file it worked fine ok so a couple of days later i tried it again but something realy strange happened, once it was burning it would say decoding video and take ages and when it finnaly got to 100% it just freezes strange ay?. Its the newest version of nero, i have tried uninstallign it, formating and starting afresh but nuthing seems to fix it i am also running xp, my burner is an acer 8x4x32 cdrw, little old i know but it has worked fine,,,, could it be that nero is 2 new for my burner? any help will be appreciated



P.s i also folowed moulders guide to burning vcd's ^^^ above but used nero for the burning and the same thing happened... strange.

A:Mpg's not burning with nero?

If there is just one MPG you are trying to burn I would guess it has a problem. Same if the MPGs you canít burn are all from the same source.

If you are having problems re-burning the MPG you already were able to burn you likely have a computer problem, although I have no idea what it could be. Maybe you lost a codec.

You say you have the latest version of Nero. Do you have the latest update to that version? There shouldnít be a compatibility problem Ė that you were able to burn a VCD with it is a good indication of compatibility.

2 more replies
Answer Match 83.58%

Okay, I have Nero Burning Rom on our old computer because there are a few songs I'd like to burn on it. Well, I'v eused Nero before at my friend's house and I figured out how to burn the cd but it won't finilize it. Since the songs are on the computer (I'm not just burning a cd) I just add them etc. Then it'll go through the burn process and it says it burned sucessfully but it doesn't automaticly finilize it and I've tried everything but it's just being stupid and confusing. So please, does anyone know what I could do? Lol. This was my last resort, if I dson't figure it out soon either I'll trow the computer out the window or just get rid of Nero. *Hee...I have a short temper* Well...please help..and thanks, like always!


A:Nero Burning Rom

16 more replies
Answer Match 83.58%

Every time i try to use Nero Burning Rom for creating an ISO file, the program just freezes up on me.
Any suggestions?
Thank You,
Gary Teresi

A:Nero Burning Rom

11 more replies
Answer Match 83.58%

Thanks for help. I have Windows XP and Nero Cd Burning software is already loaded. I have no idea how to proceed to either copy from an existing CD or download music from the internet.
If anyone can provide instructions it would be appreciated, including what sites to go to get music(1952 to 1979 only).
Nick Gill

A:need help with Nero CD Burning

7 more replies
Answer Match 83.58%

I use Nero v66016 and tried to use the copy DVD feature and got this error message: This path is invalid. Please correct the path or click on cancel.

I have used this feature many times before and never got this error message. Does anyone know how to correct it? I have tried other DVD's but no luck. I have no problems with my system according to AVG, SpyBot and Ad-Aware. I'd appreciate any help. Thanks.

More replies
Answer Match 83.58%

Hi, Gang! Looking for help (again) with technical jargon and knowhow! I have never had much success with Nero and another problem has arisen: I am trying to burn (or just make a data disc) from a .AVI file that I have prepared and every time I try to drag the file across I get a message saying that the file is greater than 2G and I must try another compilation (UDF). There is no clue or instruction what all this means or what I am supposed to do. Can anyone walk me through this?

A:Burning DVD with Nero

13 more replies
Answer Match 83.58%

i just got nero 7. when i download video from my video cam it all works fine. if i burn it to a reg cd and view it on the computer all is good, but when i try to burn it to a dvd that can play on any dvd player the video looks fine but the audio is a little off and about every 5 to 10 sec. there is a little flicker. i have tried to goto the nero support, but they suck, sorry to say but i payed for it now and really would like to burn my home video so i can play it on a dvd player.

A:nero 7 dvd burning help

well i don't know much about burning a dvd but i do know stuff about a regular cd. have you tried using a lower burning speed? because when i burn my cds i use an x1 burning speed.

2 more replies
Answer Match 83.58%

Searched before posting so PLEASE forgive if it's elsewhere already.

Use NERO to convert AVI to MPEG and then burn video DVD's. HOWEVER, can't put file over 700mb onto one disc but know there ARE ways to do it. Is NERO one of them?

A:NERO dvd burning

You need to put your AVI's into NeroVision Express to convert and burn. You can also create chapter stops and menus etc.

2 more replies
Answer Match 83.58%

Hey. Iwas reading the hardware forum, and came across a thread that mentioned nero taking up space on a HD. LOTS of space he said,and I've been burning a bunch of stuff latley and my HD really been filling up. Way dispraportionate(whew) to the rough estimate of stuff supposed to be stored on the HD. So this made me wonder, is there a file that nero stores copies of files already burned??? There was also mention of the files being hard to find?? Anybody heard of this. Thanks in Advance, Graiskye.

A:NEED TO KNOW about NERO Burning Rom

6 more replies