Tech Problem Aggregator

Firefox won't startup-Error message says "Configuration error"

Q: Firefox won't startup-Error message says "Configuration error"

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A: Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

7 more replies
Answer Match 83.58%

Hello,
 
My laptop takes a long time to startup and load windows7.  It came pre-loaded.   Firefox runs really slow and  keeps locking up on me showing the "not responding" message up top.
 
Any advice and/or help is greatly appreciated!
 
Thanks in advance!
 
Donato

A:Slow computer startup/ Firefox (unresponsive error message)

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox, save it to your desktop and run it.
 
Checkmark the following checkboxes:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post.
 
 

Please download AdwCleaner and install it.
 
When AdwCleaner opens you will see an image like the one below.
 

 
Click on Scan to start the scan.
 
Once the search is complete a list of the pending items will be displayed.  If you see any which you do not want removed, remove the check mark next to it.  
 
Click on Clean to remove the selected items.  If you have any questions about any items in the li... Read more

7 more replies
Answer Match 75.6%

Greetings!

I am having a problem with the above error message (error:syntax.error) when I'm running Firefox.

I have uninstalled Java and reinstalled it, but still the same problem.

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 8
RAM: 8099 Mb
Graphics Card: Intel(R) HD Graphics Family, -238 Mb
Hard Drives: C: Total - 698475 MB, Free - 580394 MB;
Motherboard: TOSHIBA, PEQAA
Antivirus: avast! Antivirus, Updated and Enabled

Thanks,
Barbara
 

A:Error Message error:sytax.error - Firefox

See if you can find help here.

http://www.java.com/en/
 

1 more replies
Answer Match 75.18%

Recently I've been getting a popup message at boot: Error detected retrieving default

configuration DEFAULT.ALC. I close the window and everything seems to run fine.
Anyone know what that's about or how to fix it??

Machine: Esystems
OS: WindowsXP Home
RAM: 1.5GB
Drive: 120GB
 

More replies
Answer Match 74.34%

I istalled a new printer/copier/scanner recently and all seems to have gone smoothly. But now whenever I boot the system, load a cd, launch my dsl connection, etc, I get the message "please wait while Windows configures the printer" and/or ""searching for installed components" or something similar. Can anybody help? Thanks!
 

A:printer configuration error message

7 more replies
Answer Match 74.34%

hi,

also, each time i start the computer, there is the following message - error failed to load branding configuration -. couldn't find anything on the web. What could it be ?

THANK YOU

A:error message branding configuration

You really shouldn't duplicate post, if not for the integrity of the forum, then so that everyone knows what you are being told and you will not be pulled down two or more pathways to a fix, yano. but no foul, no harm, just acting on your behalf (and SF's)

Mike

1 more replies
Answer Match 73.5%

I get an error message when I open Itunes. It says "Itunes has detected a problem with audio/video configuration..." and that the audio video may not play correctly.

I have uploaded some cd's to Itunes and I have noticed the sound has skips in it.

Also, my daughter wanted to open some pictures from a disc but the disc wouldn't work. I took the disc to work and opened the pictures fine.

I have a Dell Dimension 8200 running XP. I do not have any other problems with the machine.

Are there diagnostic programs that I might try to correct this problem, or do I need to replace the cd drive?

McChuck
 

More replies
Answer Match 73.5%

This a.m. I was greeted by this System Configuration Utility message popup:

You have used the System Configuration Utility to make changes to the way Windows starts.

The System Configuration Utility is currently in Diagnostic or Selective Startup mode, causing this message to be displayed and the Utility to run every time Windows starts.

Choose the Normal Startup mode on the General tab to start Windows normally and undo the changes you made using the system Configuration Utility.
-----------------------------------------------------------

Yesterday I used the system configuration utility to untick a program in the Startup menu. Is that why I am getting this message now?

If I follow the directions and select the Normal Startup option, will all the services that I have painstakingly turned off over time start running on startup again? Or will it just load the one application it changed?

Could I restore the registry from a few days ago instead? And, if I do that, will the tracking cookies I finally got rid of by setting them to be deleted at start-up reappear?

Another question I have is, what is the utility used for, if not to make changes? Is it just to look at? What good is it then?

HP Pavilion - Pentium(R) 4CPU
160GB HDD 512 MB RAM
Windows XP SP2 Home
 

A:System Configuration Utility Error Message

12 more replies
Answer Match 73.5%

OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745

I am receiving an error message window titled "Wireless Configuration" with the following message:

"OLE initialization failed. Make sure that the OLE libraries are the correct version."

I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.

Thanks for any help you could provide.
 

A:Solved: Wireless Configuration Error Message

8 more replies
Answer Match 72.66%

I have a Dell 8250 running XP. I haven't installed anything on my computer lately; however, when I started the computer this morning, I got 3 plug & play configuration error lines followed by the f1 or F12 option.

When I go into my device manager, both the NVIDIA Geforce 4 MX420 display adaptor and the VIA OHCI Compliant IEEE 1394 Host Controller say they cant find enough resources and are giving a code 12 error. Can anyone help me get this straightened out? Liike I said, this started out of the blue, without me installing anything new.

Thanks!
 

More replies
Answer Match 72.66%

hi!

I got on Outlook this message:

One or more rules could not be uploaded to Exchange server and have
been deactiveated. This could be because some of the parameters are not supported
or there is insufficient space to store all of your rules.

any ideas?
thx!!

gicio
 

More replies
Answer Match 71.82%

Windows update was interrupted yesterday and now I'm getting all kinds of errors.

1-SVChost.exe application error Instruction at 0x745f2780 referenced memory a 0x00000000 memory could not be "read". This happens when I try to re update windows and when I boot computer and perodically while searching the internet.

2-No audio device. My sound is only working when the error message pops up.

3-Generic host process for Win32 services has encountered probelm needs to close.
(this occurs when I boot up computer)

4-unable to create C:/document and settings/jamie/application data/BVRP Software Netwaiting Moth log txt.file (this happened when I booted computer

I called dell as the system is only 4 months old, and i have warranty, however they informed me that for software related issues they would charge 264.00!!!

You could say that I'm rethinking my purchase choice.

Any help would be greatly appreciated!

Thanks so much
 

A:SVC host.exe error message-windows update, configuration problem

did a system restore to a checkpoint on monday, when all was well. Fixed the sound problem, but still getting the error message about SVChost and the Win 32 one.
 

2 more replies
Answer Match 70.14%

I keep getting a message that Firefox that suggests I have Mozilla running when I have saved and quit.The task manager indicates it is not running but I have Process Lasso which suggests that Firefox is running and hogging CPU.What can I do to resolve this?
JOHN

PS Its 1023am in UK

A:Firefox;Error message.Firefox is stll running

which task manager tab did you check? did you check the processes tab in your task manager? it should show a firefox.exe

6 more replies
Answer Match 68.04%

Try this link: http://support.microsoft.com/kb/836941
 

More replies
Answer Match 67.62%

When I try to open Firefox from my desktop (Or elsewhere like from e-mail) I get an error message pop-up on the screen- "Firefox.exe-Entry Point Not Found",with details that say "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll."
I close the error message with the "X" and Firefox proceeds to open,but this may occur 1 or 2 more times causing Firefox to try to open more pages...
I don't know what this means or how to fix it,any suggestions?

A:Firefox error message?

Try uninstalling/reinstalling Firefox?

Louis

6 more replies
Answer Match 67.62%

Thank you in anticipation, that someone will be able to help with my problem as outlined below.

I am using Firefox browser with the AOL dialer, as I recently stopped using the AOL software after changing from AOL dial up to AOL Broadband wireless. I am still using the AOL dialer as I gather, I need this to log on wirelessly with AOL, at least in UK.

When I log onto Firefox, I get a server error message. So I go to Tools > Options >
Connection Settings & then click onto the Direct or Auto connection setting, go back & retry & it allows connection to my homepage, but I have to do this each time I logon to Firefox. IE causes no problems & nor does Opera, but as I use roboform which isn't compatible with Opera I prefer Firefox to IE.

When this first happened I thought Firefox might have been corruupted so removed & reinstalled but same error message? My partners laptop who has no problems logging on is using the same AOL wireless connection although mine is the PC which was connected to wireless/router/modem.

A work around would be greatly appreciated, thanks.
 

A:Firefox error message.

8 more replies
Answer Match 67.62%

Hello, Just installed the latest Firefox browser. Each time that I try to open a site from its icon on my desktop I get an error message- Cant find this site, check if you typed the address correctly. A second later the site opens without any problem, but this error message stays until I press OK button on it.
This is very annoying, did not happen with the older Firefox version... Help me please.
 

A:Firefox error message

6 more replies
Answer Match 67.62%

hello

Whenever I start Firefox, an error occurs. A message box pops with "Title : JavaScript Application" and the "Message : An error occurred throwing an exception".

Please help me as soon as possible.

A:Firefox error message

See if same problem occurs with a different Home Page.

5 more replies
Answer Match 67.62%

Good Afternoon,
I cannot access my Linux system to the internet. The error message states that the
Firefox could not find the server at google.com

Please, please tell me what to do. It would be nice if I could speak to someone. Is there a phone number to reach you?
Thank you,
 

A:Firefox error message

No one will want to call and no one will want to give you their number I'm afraid...

Which distribution do you have? Have you tried with any other browser or have you tried pinging anything to ensure your connection is live? Are OS updates downloading ok?
 

10 more replies
Answer Match 67.2%

I am running Windows XP and every time I start my machine up I get an error message saying:

Error: 'C\windows\inf\GETPLUSo.INF'

And I think this same problem is stopping me from installing some things on my PC.

I think that I might have accidentally blocked something using Spybot serch and destroy without backing it up. I know, I know, I'm a doofus but i'd really appreciate some help getting rid of this error.

Thanks in advance.
 

A:Startup Error Message

See post on other area of forum that may help.
http://forums.techguy.org/malware-removal-hijackthis-logs/635236-solved-getplus.html
 

1 more replies
Answer Match 67.2%

I have XP. When i started my computer the message came like this
Error Loading c:/Windows/Downloaded Program Files/bridge.dll
What is this? How to rectify this?

And i also i could not run msn & yahoo messenger in my computer so i uninstalled and redownloaded again. After that also it is not working. When i typed my id and password it starts singin but not signin.

How to rectify this? Kindly help me our experts? Advance thanks.
 

A:DLL error message at startup

Hello and welcome to Techspot.

I don`t know what your thread title has to do with your problem/s.

In future please would you try and be as descriptive as possible?

Also would you please fill in your system specs in user profile at the top of any page just click on edit profile.

The bridge.dll is an adware programme. Please see HERE for a possible solution.

I would also recommend that you go HERE and follow the instructions very carefully. Print them out if you can.

Once you have done that then go HERE for instructions on how to post your Hijackthis log.

Regards Howard :wave: :wave:
 

5 more replies
Answer Match 67.2%

About 50% of the time that I start up my computer I get an error message as soon as the desktop is visible (before anything is on the desktop though.) The error message says something like "Windows has encountered a problem and must restart." Then there's the option to click "Close" or "Debug", click either results in the computer freezing.

Any suggestions?

-Capnbob
 

More replies
Answer Match 67.2%

Sometimes when I start my laptop, I will get an error that says 'Error: could not connect to API'. Does anybody know how I can fix this. Thanks.
 

A:API ERROR message at startup...

API refers to Application Program Interface. Since this only occurs at startup one cause could be a program that has been uninstalled but the 'startup' for the program is still there but it can't find the API. It could also be something you have installed but need to be connected to a certain server or website to run.

I would start\run type msconfig go to the start up tab and look for something you uninstalled recently.
 

1 more replies
Answer Match 67.2%

yesterday my computer froze and i couldnt shut it down, i had to turn it off at the tower.Upon trying to reboot it displays windows xp logo and then the upon pressing f8 the help screen appears.it will not allow me to acces any of the functions ie safe mode, etc and then a blue screen appears which says

A problem has been detected and windows has been shut down to prevent damage to your computer.
Disable or uninstal any anti virus/disk defragmentation of backup utilities . check your hard drive configuration and checkfor any updated drivers,Run CHKDSK/F to check for hard drive corruption and then restart your computer
technical information
STOP:0x00000024 (0x00190203, 0x86af2580, 0xc0000102, 0x00000000

I have no idea how to run chkdsk /disable anti virus if windows wont load..can i access it.
I ran a very lengthy diagnostic check took about 15 hours and everything passed the test. I am not very pc literate and dont know whether i am better off taking it in to be repaired of whether this is a situation i can remedy.I would love to know what the error codes , in particular mean.
Help
lin
 

A:Error message upon startup

From auhma.org description --0x00000024: NTFS_FILE_SYSTEM
A problem occurred within NTFS.SYS, the driver file that allows the system to read and write to NTFS file system drives. There may be a physical problem with the disk, or an Interrupt Request Packet (IRP) may be corrupted. Other common causes include heavy hard drive fragmentation, heavy file I/O, problems with some types of drive-mirroring software, or some antivirus software. I suggest running ChkDsk or ScanDisk as a first step; then disable all file system filters such as virus scanners, firewall software, or backup utilities. Check the file properties of NTFS.SYS to ensure it matches the current OS or SP version. Update all disk, tape backup, CD-ROM, or removable device drivers to the most current versions.

* My first best guess is that either you have bad sectors on your harddrive or your harddrive is failing.

* You could possibly slave your drive in another system and copy your important stuff onto a flash drive and/or burn to a disk. If the other drive has a harddisk diagnostic utility you can test your slave drive by running both S.M.A.R.T. and Long tests. Make sure you do the Long Test. Seagate Tools will work with many harddrives not just their own.
 

5 more replies
Answer Match 67.2%

I am running windows 2000, when I first started up my machine today, it gave me the error message as following:<>

The following file is missing or corrupt. <windows 2000 root>\system 32\intoskrnl.exe <>

I then proceeded to put in my 2000 CD and restart, as that worked for me before. No such luck this time, but I did finally press F8 and tried restarting it to last known good configuration. After that I keep getting the following message.<>

Check for viruses, remove newly installed hard drives or hard drive controllers. Check harrd drive to make sure it is properly configured and terminated. Run chKDSK\F to check for harddrive corruption, and then restart computer. <>

What do I do? I'm confused, and no not where to start? Can someone please give me explicite directions on how to resolve this problem? I would so much appreciate it, as it is driving me nuts right now, and I really don't want to loose my hard drive, if it can be helped. PLEASE........if anyone knows how to help me, I'd appreciate it soooooooo much. Thanks!
 

A:Error Message On Startup. Help!!!

you can try to log into windows and go to Start>Run and type cmd in the box and the command prompt should open. Now in the command prompt window type sfc /scannow and hit enter.
 

1 more replies
Answer Match 67.2%

Start from the beginning. I installed a Disney screen saver but it wasn't compatible with XP so I un-installed it and now each time I start up my computer, I get an error message that says can't find afterdrk.exe in the registry. Then it tells me to go to the Registry to remove it. How do I do that? Thanks, george
 

A:On Startup Error Message

6 more replies
Answer Match 67.2%

Hello Evey body ,

I have problem with message below

I know this message belong to ATI Display Driver , and i update the .NET Framework to 3.5 and nothing happened

It appears when i restart or start the windows

How can i Solve this problem
 

A:Startup Error Message

The error message in this forum http://www.rage3d.com/board/showthread.php?t=33933028 is similar, and may solve your problem. Looks like you'll have to uninstall and reinstall the ATI software.
 

1 more replies
Answer Match 67.2%

Runnning Windows XP Pro.....the startUp error message reads:

ERROR LOADING C:\WINDOWs\bs3.dll
the specified module could not be found.

Please advise what this may indicate and how I can remove it.....
 

A:StartUp Error Message

I think you should run Hijack This, look for and fix tis entry: O4 - HKLM\..\Run: [Bsx3] RunDLL32.EXE C:\WINDOWS\bs3.dll,DllRun
You can go to http://www.tomcoyote.org/hjt/, and download 'Hijack This!'. Unzip, doubleclick HijackThis.exe, and hit "Scan". Then "fix" the above.
 

1 more replies
Answer Match 67.2%

Good Morning everyone,

I had a few malware on the computer I use at work.
I think I have cleaned them all and I've put an updated version of Avast that didn't report any error.

Nevertheless, I keep having a message when I start my computer saying

Windows cannot find c:\windows\system32\printer.exe

I have tried to go to the MSCONFIG configuration to untick it at startup but it does not appear.

Thanks for helping me remove this annoyance.

Mehdi
 

A:Error Message at Startup

Find it in Autoruns and delete it.

Use Startup Control Panel or Startup Control Panel (Exe version for Vista) to control startups and leave msconfig for diagnostics.
 

1 more replies
Answer Match 67.2%

When I start up my Dell Dimension 8200, I get an error message that says: "Drive 1 Primary EIDE controller is operating outside of normal specifications" and directs me to replace HDD. I had originally (year ago)replaced the original hard drive after a power supply failure with a new W.D. and put the original back in as a slave. Any suggestions other than tossing the W.D. hard drive? Can I transfer everything to the slave hard drive and is there an "simple" way to do that? Thank you!

More replies
Answer Match 67.2%

I am using Verizon Online DSL and get the following error when I turn on my machine:

Login failed. You are connected to the Internet. However, Verizon Online servers can not be reached at this time. Please try again. 0xC2090194

This appears every time I boot up my computer. It's really annoying, and I wondered if anyone else had this problem and knew how to fix it. The message appears in a Verizon Online Updates error message dialog. Any advice would be great.

P.S. Once I hit OK and close the Verizon Online Updates - Welcome to Verizon Online Updates dialog box that appears along with the error message, I am able to access the Internet and proceed fine.

Thanks,

Kristin

A:Need help - get an error message at startup

hmmm.....maybe the update is running at startup and see if you can disable it. what you need to do is to clic on start -> run -> type in "msconfig" without the "" and then on the startup tab, look for the verizon update and see if you can disable it. then reboot the computer and then see if the problem goes away.

you can try to always update you verizon stuff manually. but do this and see if the error goes away. have you tried contacting your ISP about this problem?

5 more replies
Answer Match 67.2%

Hey guys,

I keep getting this annoying error message that reads: "Error: loader couldn't initialize service!" I have 2 operating systems on my computer, 98SE and XP Home, and I can choose which one to run when the computer starts the boot. The boot itself goes fine for both, but once the background appears (after the welcome screen) the message comes up (this occurs on XP only). I have no idea what it could possibly be caused by. Has anyone ever had this error before? If so, how did you go about reparing it? Any help would be appreciated.

Thanks,
John
 

A:XP Error Message on Startup

7 more replies
Answer Match 67.2%

I've noticed this two days ago, I've had a death in the family since then and am now just trying to tackle this. I do not remember what I was doing at the time.

Again, on start up I get an error message that states

Error loading C:\WINDOWS\system32\knwbbvgb.dll

if anyone has any help I would love it, plus I am sorry if this is the wrong place to post this. it looked okay though

jz

A:Getting An Error Message On Startup...

Have you recently removed any viruses/malware from the system? This could be a leftover from that.If so, first I'd suggest that you try a couple of these free, online scanners to see if anything has slipped by your protection:(Be advised that some of these scanners will pickup things in "quarantine" from other anti-virus programs - so review the results carefully)http://housecall.trendmicro.comhttp://www.pandasecurity.com/homeusers/solutions/activescan/http://www.kaspersky.com/virusscanner Scan Only - no removalhttp://www.bitdefender.com/scan8/ie.htmlhttp://support.f-secure.com/enu/home/ols.shtmlhttp://us.mcafee.com/root/mfs/default.asphttp://onlinescan.avast.com/http://ca.com/us/securityadvisor/virusinfo/scan.aspxhttp://www.eset.com/onlinescan/<links compiled on 02/14/2008> After ensuring that your system is clean (if you don't, the malware may mutate and become harder to remove) you can use this free application to remove the startup entry that's calling that file: http://www.microsoft.com/technet/sysintern...s/Autoruns.mspxJust scroll down the list until you find the image path that has that DLL file in the name and remove the checkmark on the left to stop it from loading.

3 more replies
Answer Match 67.2%

I get an error message every time I boot up. "Desktop Agent Tray has stopped working". How can I fix it when I don't know what it is. Fault Module Name: KERNELBASE.dll
Can anyone give me a clue?

A:Error Message at startup!

^ Please remove this spammer.

@Nenah:
This post will allow you to disable the startup item VIA windows
http://social.answers.microsoft.com/...5-4344eba682bd

1 more replies
Answer Match 67.2%

When i Start up my windows xp home edition laptop an error message pos up and says:

Error Loading C:\Program Files\WildTangent\Apps\CDA\cdaEngine0400.dll

The specified module could not be found be found.

--------------The title bar of the error message says, "RUNDLL"-------------

WHAT IS WRONG WITH MY COMP, AND HOW DO I FIX THIS ERROR! PLEASE POST SOME FEEDBACK FOR ME, THANKS!
 

A:Please Help Me....error Message On Startup

WildTangent is used to play multiplayer games online.

Download and run HighJackThis. Save the log and then it will appear in Notepad. Copy the log and paste it here.
 

1 more replies
Answer Match 67.2%

When i Start up my windows xp home edition laptop an error message pos up and says:

Error Loading C:\Program Files\WildTangent\Apps\CDA\cdaEngine0400.dll

The specified module could not be found be found.

--------------The title bar of the error message says, "RUNDLL"-------------

WHAT IS WRONG WITH MY COMP, AND HOW DO I FIX THIS ERROR! PLEASE POST SOME FEEDBACK FOR ME, THANKS!
 

A:Error Message On StartUp

WildTangent is known malware, I'm afraid. You'll probably see wcmdmgr.exe in your start up tray. Ad-Aware is good for removing this
http://www.lavasoftusa.com/

So too are the methods listed here:
http://www.kephyr.com/spywarescanner/library/wildtangent/index.phtml
 

2 more replies
Answer Match 67.2%

I'm receiving a message when windows opens that says that this cannot be found:

C:PROG~3\f991wao.jss

Can anyone tell me if it matters and how I can recover it if necessary?

A:Error Message On Startup

Let's see what starts when you boot your computer. Download and run Startup List (does not need to be installed, just run it).
When done, click File then Save as and save Startuplist.txt to your Desktop or somewhere you can find it.
Start a reply here and paste the contents of Startuplist.txt into it.

9 more replies
Answer Match 67.2%

When I start my computer I get a blank notepad type window that is titled: C:\PROGRA~1\COMMON~1\SYMANT~1\CCAPP.EXE
The error message reads: Error-16 bit MS_DOS Subsytem
The NTVDM CPU has encountered an illegal instruction.
CS:053e IP:0235 OP: 636b696e67
I am using XP Home, SP1.
 

A:error message on startup

13 more replies
Answer Match 67.2%

This is the message I get when I start up XP:

Error loading C:\Program
Files\WildTangent\Apps\CDA\cdaEngine0400.dll

The specified module could not be found.
Any help would be greatly appreciated.
I ran spybot and fixed some problems then I started getting this error message.
 

A:Error message at XP startup

13 more replies
Answer Match 67.2%

Frequently when I boot up, a dialog box opens that reads..ATI poller "the instruction at OX7C911639 referenced memory at 0x0086300 could not be read". I did post this before and please excuse me for doing it again. I received two replies and completely understand that my reply to them was not responded to. The dialog box is annoying but does not seem to be affecting anything else. ATI support was zero help. operating system is XP.
Again, sorry to be a pest. Tank you for any help!
 

A:Startup error message

The ATI hotkey poller is used if you want to use hotkeys to change display settings, but it's not necessary if you don't use that function. I have it disabled on my machine and ATI still works fine. Go into Administrative Tools > Services, disable ATI HotKey Poller, reboot and see if that gets rid of the error message.
 

1 more replies
Answer Match 67.2%

I have a toshiba all-in-one desktop computer thats currently having startup issues. A blue screen flashes with a boot disc error or something like it (according tomy sister the message changes from time to time) and then it acts like its going to start up but it reboots itself and the process repeats.

Normally after the blue screen (which flashes by so fast its kind of hard to read it all or any of it) a black screen comes up saying there's a cable loose or to check for loose cables, then to install a boot disc or something similar.

Its been working perfectly up until last night.
 

More replies
Answer Match 67.2%

Hi, when turning on my computer frequently I'm getting the message "The instruction at 0x7c80af07 referenced memory at 0x7f93ffb5. The memory could not be read. Click on OK to terminate or click on cancel to debug" I click on debug and it restarts the computer and seems to go fine the second time. Can someone please tell me what this means and why it's happening.

Thanks
 

A:Error message upon startup

The cause can have a dozen reasons.
It could be faulty RAM, but that should show up as unreliability afterwards
It could be a flakey area on the hard drive, causing an incorrect loading of a driver or system file.
It could be a dodgy or damaged driver.

etc.

I would opt for the driver issue first, if one is damaged when loading initially it could be the cause. Renew motherboard video and audio drivers.
 

1 more replies
Answer Match 67.2%

Hi,

Since my last post I was able to regain the functionality I had lost, however, the following error message appears on startup; a variant of the original. Please see my last post for details if necessary. Thanks.

Here's the message:

Error in C:\WINDOWS\system32\msfeeds.dll
Missing entry:Scheduler

Jim
 

More replies
Answer Match 67.2%

Hey...
i found a problem with ma computer recently.....just a few days before i started receiving an error report while starting windows.ie at the startup....like "Windows-Application error
failed to initialise properly click ok to terminate"
and wen i ok windows was bak to normal in functionality....
but the next day i found dat the windows was not booting like just the desktop was loading with ma walpaper but no taskbar and icons...
i tried restarting several times but the result was the same...
the only remedy 4 me was to kill "explorer.exe" openin ask manager(alt+cntrl+del) and rerunning the same..
still i couldnt load all my startupp apps(just the volume icon and lan icon was displayed in the system tray)..
i dint knew wat had happend actually(weather itz any kind of infections or something)...but doubtfully i uninstalled the ".net framework 4" i installed a day b4 i got d error....and the result was slight different..
this time i was able to load windows with all my icons and my desied apps in system tray...BUT my booting was taking a much more time and I WAS STILL GETTING THAT ERROR MESSAGE....
everything after booting is normal...
Can any one please help me to remove the error message thats blocking my startup(i'm attaching a screenshot here)
thanks in advance........

my pc,
intel pentium 4 processor,
1.5 gb ram,
2.66 ghz...

using
windows xp professional sp2.
 

A:Error message on startup

.Net Framework Problems

First suspect is that you still have a .net problem. Checkout the fixes at:
http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx.
You might also run c:\sfc /scannow to repair any missing or damaged windows files. (You may need the XP install CD)
 

8 more replies
Answer Match 67.2%

RUN dll.32 i accidently deleted this programme from my comp and cannot retrieve any help gladly recieved plz

A:error message @ startup

Download a new copy from HERE

1 more replies
Answer Match 67.2%

the error message is
rundll32.exe-Bad Image
The application or DLL C:\Documents and Settings\Admin\Application Data\newnext.me\nengine.dll is not avalid Windows image.Please this against your installation diskette
 

A:getting error message on startup of pc

Hi and welcome

That is adware,

Please download Malwarebytes' Anti-Malware from Here or Here

Double click mbam-setup.exe to install the application.
Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
If an update is found, it will download and install the latest version.
Once the program has loaded, select "Perform Quick Scan", then click Scan.
The scan may take some time to finish,so please be patient.
When the scan is complete, click OK, then Show Results to view the results.
Make sure that everything is checked, and click Remove Selected.
When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
Copy&Paste the entire report in your next reply.
Extra Note:
If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed with the disinfection process,if asked to restart the computer,please do so immediately.
 

1 more replies
Answer Match 67.2%

This is the message I get on startup

EM_EXEC.EXE-Entry Point Not Found
The procedure entry point [email protected]@@QAEXXZ could not be located in the dynamic library COMNCTR.dll

When I click ok it goes away but it is very annoying can anyone help?
 

A:Win XP Pro Error Message on Startup!

6 more replies
Answer Match 67.2%

When I turn on my comp. I receive an error message:

The IPHLPAPI.DLL file cannot start.

Any suggestions on how to fix this little critter?

Thanking all responders in advance
 

A:Error Message Upon StartUp

13 more replies
Answer Match 67.2%

Upon startup I get this message:
Cannot find a device file that may be needed to run Windows
or a Windows application.
The Windows registry or System.INI file refers to this device
file but the device file no longer exists.
Press any key to continue.
I use Windows 98.
Thanks for your assistance.
Elaine in Dallas
 

A:error message on startup

Hi gwbush

As we don't know the device refered to

Please post your startup list by doing the following :-

Please go here and download startuplist 1.4 :-

http://www.lurkhere.com/~nicefiles/

Download to any folder or your desktop
Unzip the zipfile
Double click the exe file
go to Edit - select all - copy - and paste the results here

then we should be able to tell you the course of action to take

steam
 

1 more replies
Answer Match 67.2%

Hi,

Everytime my Windows XP starts, an error message as below appears. it slowing down the windows loading process. My antivirus (Avira Pro) did not detect any virus.

Windows cannot find "c:\documents and settings\extensa46302\pwd.exe." Make sure you typed the name correctly and then try again. To search for a file, click the start button and then click search.

Hopefully somebody can help me solve this problem. Thanks.

A:Error message at startup

HelloA "Cannot find...", "Could not run...", "Error loading... or "specific module could not be found" message is usually related to malware that was set to run at startup but has been deleted. Windows is trying to load this file but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads. To resolve this, download Autoruns, search for the related entry and then delete it.Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there. (click here if you're not sure how to do this.)Open the folder and double-click on autoruns.exe to launch it.Please be patient as it scans and populates the entries.When done scanning, it will say Ready at the bottom.Scroll through the list and look for a startup entry related to the file(s) in the error message.Right-click on the entry and choose delete.Reboot your computer and see if the startup error returns.Credit to quietman7

3 more replies
Answer Match 67.2%

When I start up windows I get this error message

File: \windows\system32\boot\winload.exe

Status: 0xc0000098

Info: The selected entry could not be loaded because the application is missing or corrupt.

A:Startup error message

Hi, you haven't given us much info on your system Vista version or what might have happened to cause this (possible bad shutdown or software install or dual boot)? You will need a copy of Vista's dvd and boot from it. Go past the language page and select the "repair" option. You could try startup repair might work if not repeat the process and this time select "command prompt" at the prompt type the command below press enter restart the computer:-


Code:
Bcdedit ?store c:\boot\BCD ?set GUID path \windows\system32\Boot\winload.exe

2 more replies
Answer Match 67.2%

http://img300.imageshack.us/img300/144/errorm.png

sorry... don't know how to embed the image in a post but could you please look at the error message I have started to get at startup for no apparent reason...

I found the event in the logs and it say's something like 'Group Policy Client could not be started because it is not a valid x32 software' (or something similar)
I then found the service but it is all greyed out... I can't do anything with it at all.

I also found an entry that said windows was loading dynamic link librarys for all running software and I should check some list and make sure all is ok or summat or nuffin or wat?

If I re-install W7 with my digital download do I have to de-activate it first or summat or nuffin?

really appreciate any kind of help here guys...

A:error message at startup

My guess, you've a flawed install. I'd re-format the boot drive and do a full re-install.

2 more replies
Answer Match 67.2%

Well basically today i went to install the Service pack 1, it was all going fine until after the reboot it got stuck at a certain file for around 30-40 mins and i had coursework to do so i got impatient and turned off my computer and back on, and i got that dreaded blue screen that tells me that Windows couldnt start and obviously that has ruined my computer, i cant do anything..

Cant go into safe mode, it just restarts my computer, i have my Vista installation cd but even then it loads the windows files when i boot from disc and once thats done the vista loading bar comes up and then it just restarts my computer or when that is done a blue screen comes up and said "a problem has been detected and Windows has been shut down to prevent damage to your computer
etc etc etc.

Technical Information *** Stop: 0x0000c1F5"

:(

anyone able to help?

im really deperate

A:Error Message During Startup cant get in :(

please anyone?

4 more replies
Answer Match 67.2%

I'm getting an error message when booting up my computer:

PXE-E61: Media test failure, check cable

PXE-M0F: Exiting Broadcam PXE ROM

No Boot Device Detected, Insert System Disk and press F1 to continue or press F2 to setup menu.

My boot up sequence is:

Floppy
CD Rom
CD Rom
LAN

I have never seen this message and this has happened out of no where. I'm not sure what to do. Please help!
 

A:Error Message during Startup

13 more replies
Answer Match 67.2%

The instruction at "0x7c918fea" referenced memory at "0x00000010". The memory could not be written.
Click on OK to terminate the program
Click on CANCEL to debug the program

OK Cancel
[_____] [_____] <-boxes to chose from in error message.

At the top it has a blue border that states:
iexplore.exe - Application Error
When I hit debug I am not sure as to what is happening or supposed to happen. When I hit Cancel it doesnt seem to be of notice either. I have also noticed slowed performance, slower internet and off net times, and certain programs will no longer work such as Microsoft Task Works. We are of very humble means certainly lacking the money to a serviceman.I am disabled and am dependent on my computer. I had Kapersky Internet Security Suit 7.0, but the membership just ran out (last 2 months). Any ideas on how to address these problems the big one being that error message would be very helpful. Thank you in advance...Happy holiday's to all...
Ian aka blugrsvt
 

A:App Error w/ message @ startup???

6 more replies
Answer Match 67.2%

On my Windows 7 Home Premium laptop, I am getting .NET error messages at startup (attached).

Any ideas as to how to correct and get rid of the messages.

T

A:.NET Error Message On Startup

In the Start Menu type MSCONFIG then select the startup tab.

Please post a screenshot of that.

7 more replies
Answer Match 67.2%

ok guys need some help I keep getting this error message when i start my computer

The message reads.....

"Reader_sl.exe unable to locate component"
"This app. has failed to start b/c MSVCP7.dll was not found"
I think this maybe have to do w/ my deleting this program my search assistant from the add/remove button but im not sure

if someone can please help me out I would really appreciate it.

thanks!
 

A:Error Message on Startup

Reader_sl.exe is part of Adobe Acrobat Reader. Try uninstalling it and reinstalling it. Or if you want, just delete the icon from the Start > Programs > Startup. The app is really not necessary to run at startup.
 

2 more replies
Answer Match 67.2%

Day 2 of Win8 -still taking me an hour to do what took 5 minutes - main 'problem' is that I don't understand an error message at start up - I click continue and it goes away - while the message is on screen AVG icon is in the bottom bar but if I click cancel or whatever (sorry forgot the other option to continue) again error message goes away and AVG icon disappears from the bottom.

if anyone's interested I copied the error message but it's a long one and show it below - please put my mind at rest and tell me how to stop the message and put things (what) right.

thanks
ian

error message
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set toan instance of an object.
atAVUS.Form1.CheckUpdates()
atAVUS.Form1.Form1_Load(Object sender, EventArgs e)
atSystem.EventHandler.Invoke(Object sender, EventArgs e)
atSystem.Windows.Forms.Form.OnLoad(EventArgs e)
atSystem.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
atSystem.Windows.Forms.Control.CreateControl()
atSystem.Windows.Forms.Control.WmShowWindow(Message& m)
atSystem.Windows.Forms.Control.WndProc(Message& m)
atSystem.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
atSystem.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtrwparam, IntPtr lparam)
************** Loaded Assemblies *******... Read more

A:Error message at startup

Welcome to the Windows 8 forum.

There is lots that we need to know before addressing your error message. What is the computer that you are running? What processor, motherboard (if you know them). Where does this error message occur? On boot up? When running a program?

Most problems can be solved by updating the drivers for your computer from the manufacturer's website. Please make sure that ALL your drivers have first be updated before trying to analyze any errors you be getting.

1 more replies
Answer Match 67.2%

When I start computer I get rundll error message that says " error loading Program~1\ofoto\ofotonow\ofusbs.dll. Specified module can't be found. I went to System Configuration Utility and unchecked OFUSBS, but it comes back on next startup, and box is "checked"again. Any ideas?
 

A:Error Message On Startup

Hi

That appears to be a programme that detects when a digital camera is attached to one of the usb ports. I would suggest uninstalling and then reinstalling the programme. Try also going Start > Control Panel > Performance and Maintenance > Administrative Tools > Services to disable from there.
 

1 more replies
Answer Match 67.2%

Hi,

My PC had crashed a few times last week but I managed to "revived" it.

Right now when I start my PC. There is always a message as shown below:

"Floppy diskette seek failure
Strike the F1 key to continue, F2 to run the setup utility."

I am very puzzled with this because I don't have a floppy disk drive!

And the worse thing is that a few of my applications is not working as a result of that!

My PC Specification:
Dell Dimension 4700
Pentium 4, CPU 3.00 GHz, 2.99GHz, 504MB of RAM
Windows XP home edition

Please advice.

Yours sincerely,
Steve
 

A:Error Message when startup, pls help..

6 more replies
Answer Match 67.2%

on startup of a gateway 220 I get an error mesage of 104 can you please tell me what it means and what I can do about it.

Thank you LOUCAT
 

A:error message on startup

16 more replies
Answer Match 67.2%

Hi ...

I always get the following message on startup "Windows cannot find 'msreged32.exe'". Need help thanking you

A:startup error message

thats not a real bad error, check this out, appears you have some malicious code removed and now have a bad path remaining in your registry try here.HKLM>software>microsoft>windows>current version>runcheck out his link http://www.sophos.com/virusinfo/analyses/w32rbotbaa.html

2 more replies
Answer Match 67.2%

Hi Folks,
A couple weeks ago I was infested with a ton of malware/spyware, causing all sorts of mayhem. Following the advice, and ALL the steps, of your Hijack This! forum, I was able to successfully clean and restore my system, and install lots of protection from this ever happening again. I have one minor remaining glitch that appeared as part of/following the cleansing process that I would like to fix, and I believe this is the appropriate section to address it.

I have a Dell Dimension, Pentium 4, Windows XP SP2 with all the latest MS updates. The problem is as follows:

While starting up, I get a windows info box (with an 'OK' button) titled "REGSVR32". Inside the box it says: 'Load Library ("c:\Documents and Settings\All Users\Application Data\qlifqbef.dll") failed - specified module could not be found'.

I can click the 'OK' button, and the box disappears and the system operates just fine, but I would really like to rid myself of this startup glitch. I have searched for the .dll file on the hard drive, but cannot find it, if it even exists. While searching, I have used the 'advanced search' features like hidden files, system files, etc. Please help me rid myself of this annoying message.

Also, opinions on whether to go ahead and install XP SP3 are welcomed, as my 'auto updates' is asking me to do it.... but I'm skeer'd... Thanks in advance!!

Brian MacKinnon

A:Error Message on startup

Click on start and then click on run. Then type "msconfig" and then click on the startup tab.

Check to see if the "REGSVR32" is checked there. Then unchecked the box if it's there. Also have you run a registry cleaner?

4 more replies
Answer Match 67.2%

hi when i start my pc i m getting an error message saying a parameter is incorrect.help
 

A:error message at startup

11 more replies
Answer Match 67.2%

Whenever I boot up my computer, I get a message that says

"There was a problem starting \3\DLCXtime.dll

The specified module could not be found"

The box has an 'OK' button and an x in the top right, I just hit 'OK' and the box goes away and doesn't bug me, but I wish to have it stop, since it kinda worries me that it may be a larger problem that may slowly get bigger.
 

A:Error Message on Startup

Hi and welcome.
Relates the Dell Printer drivers.
Microsoft Answers - link relates to Vista but the answer is the same.
http://answers.microsoft.com/en-us/...xtimedll/f6393e5d-e94e-40e6-8665-099908986955
 

1 more replies
Answer Match 67.2%

My mom's computer is getting an error at startup. It says there's a problem with her hard drive that she needs to fix. But she doesn't know what it is. Maybe you can help. Here is the HTJ log.
DDS (Ver_09-05-14.01) - NTFSx86
Run by Jeanette Ames at 3:24:54.74 on Tue 06/23/2009
Internet Explorer: 7.0.5730.13
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.511.79 [GMT -4:00]

AV: McAfee VirusScan *On-access scanning enabled* (Updated) {84B5EE75-6421-4CDE-A33A-DD43BA9FAD83}
FW: McAfee Personal Firewall *enabled* {94894B63-8C7F-4050-BDA4-813CA00DA3E8}

============== Running Processes ===============

C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\WINDOWS\System32\CTsvcCDA.exe
C:\WINDOWS\system32\svchost.exe -k hpdevmgmt
C:\Program Files\iWin Games\iWinTrusted.exe
C:\PROGRA~1\McAfee\MSC\mcmscsvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mna\mcnasvc.exe
c:\PROGRA~1\COMMON~1\mcafee\mcproxy\mcproxy.exe
C:\PROGRA~1\McAfee\VIRUSS~1\mcshield.exe
C:\Program File... Read more

A:Getting a error message at startup

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

10 more replies
Answer Match 67.2%

some time ago a virus scan uncovered a hijack file WsCmd800.exe instead of quarantine i deleted the file. Now when i turn on the computer the computer stops half way thru startup and a error message with a big red x in the corner comes up and says windows cannot find this file WsCmd800.exe make sure the path is correct. I click ok and the computer boots up until the next startup. How do i remove this error message so the computer boots without stopping on this error?
 

A:startup error message

Run MSCONFIG and select the Startup tab. Then look for it. If you don't find it select the Services tab and look for it there. If that fails also Run REGEDIT and search for it there and delete any reference for it.
 

1 more replies
Answer Match 67.2%

Everytime I login a popup appears:






Quote:
There was a problem starting:
C:\Users\User\AppData\Roaming\MFWMAAECE.dll

Access is denied.


I've just uninstalled a program which it might be related to but I haven't had any problems anywhere. I've searched for the file in the folder and in start menu and its not coming up with anything.

Running Windows 7 Home Premium.

Thanks.

A:Error message on startup

Nothing come up in Google, possible problem
Run a full antivirus scan
Download and run malwarebyte, full scan, after update
Report back

Try in safe mode if necessary.

4 more replies
Answer Match 67.2%

My wife's Dell Inspiron laptop gets the following error message when booting up. "Error loading C'Windows/cofxdk.DLL". What does this message mean and how do we remove it? Thanks.
 

A:XP Startup error message

Go here and click the green "Download latest version" link to download and save HiJackThis 2.0.4.

After it's been downloaded and saved, close all open windows first, then double-click the saved file to install it.

Allow it to install in its default location - C:\Program Files.

After it's been installed, start it and then click "Do a system scan and save a log file".

When the scan is finished in less than 30 seconds, a log file will appear.

Save that log file.

Return here to your thread, then copy-and-paste the entire log file here.

----------------------------------------------------------
 

1 more replies
Answer Match 67.2%

When I start Windows XP, an error message pops up as soon as windows loads. It says "windows cannot find 'C:\\safe.exe."

It's also followed by another window that say to delete it from the registry.

Any help??
 

A:Error Message at Startup

go to Run, type MSCONFIG, and go to startup, look for something that is something like 'safe' and uncheck the box there.
 

3 more replies
Answer Match 67.2%

Hello. I just cleaned my computer out for the 400th time. After putting it back together, I get an error message right after my motherboard screen. It says CPU fan error! Press F1 to continue. So I press F1, and everything starts up as usual. I can see through the glass pane that the fan is indeed running. It MIGHT be running just a touch high but that may be in my head. Speedfan says my temperatures are fine. What causes this error, and why am I getting it all of a sudden?
 

A:CPU fan error message before startup.

Ignore this. Mark as solved. I think a PSU cord was just touching it or something.
 

2 more replies
Answer Match 67.2%

I think it has to do with this:

O4 - HKLM\..\Run: [SoundService] rundll32.exe "C:\WINDOWS\system32\ggvhgtvj.dll",setvm

Says that it cannot run the ggvhgtvj.dll?

Here is the Highjackthis log.....

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 5:32:19 PM, on 4/22/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logitech\lvmvfm\LVPrcSrv.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\Program Files\ewido anti-spyware 4.0\guard.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Intel Application Accelerator\iaantmon.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Linksys Wireless-G PCI Network Adapter with SpeedBooster\WLService.exe
C:\Program Files\Linksys Wireless-G PCI Network Adapter with SpeedBooster\WMP54GSv1_1.exe
C:\PROGRA~1\COMMON~1\X10\Common\x10nets.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Java\jre1.5.0_11\bin\jusched.exe
C:\Program Files\Analog Devices\SoundMAX\SMax4PNP.exe
C:\Program Files\Intel\Intel Application Accelerator\iaanotif.exe
C:\Program Files\Intel\Modem Event Monitor\IntelMEM.exe
C:\WINDOWS\system32\dla\tfswctrl.exe... Read more

A:HELP! Keep getting error message at startup??

16 more replies
Answer Match 67.2%

Hello,

I recently just starting having this problem in which it states that a specified modual cannot be found when i enter onto desptop?. I have no clue where this came from and it is very annoying. I have attached an image at the bottom of what specifically it states. If anyone could help me out with this issue, i'd greatly appreciate it.

Hard Drive Capacity 320 GB
Processor Cores 2
Processor Speed 1.86 GHz
Processor Type: Intel Pentium Dual-Core P6000
RAM 4GB

Thank You
 

A:Error message during startup

Hi Friend,
It seems like u need to reboot your computer with new Operating system. The System file has been corrupted... !!!
Reboot ur computer as soon as u can....

By
Darius.J
 

2 more replies
Answer Match 67.2%

I am getting a new startup message error

"There was a problem starting drtmp.dll. The specified module could not be found".

I did a virus scan with Malware Bytes and AVG and after fidning and removing some threats, this message now pops up. How do I disable this pop up or better yet reinstert or restart the missing DLL?

I am running Windows 7 32 Bit Professional

Thanks

A:New Startup Message Error

I would suspect that you don't want to restart the missing DLL.
It's most likely a virus that was removed - and your anti-malware program didn't get all the remnants of it.

To stop it from starting, please use this free application: http://technet.microsoft.com/en-us/s.../bb963902.aspx

1 more replies
Answer Match 67.2%

Right, for a start I am not computer literate at all so do not understand technical terms...
Can someone help me PLEASE????

Once switching on pc, there ie an erroe message which reads something like, we are sorry for the inconvenience but are unable to satrup windows. Possible cause change to harware or software. What can I do to get in and find out which it is?

A:Error message on startup!

try pressing f8 when booting up and from the boot options choose
last known good configuration
if this does not work,then try safe mode from the boot option menu

2 more replies
Answer Match 67.2%

When i turn on my Compaq Presario it starts up ok, i get to the user chosing place, i pick "rob" (that's my name) and press ok. then everything starts up, it is all fine, but lately i have got an error message that plainly says "Cannot open file. May be corrupted. Replace the file with a new one and try again." i don't know what to do. i have just been pressing ok, and everthing works ok, but it is kinda an annoyance. So if you could help me, that would be great. Oh, i have windows ME if that is any help.
 

A:Error message at startup

8 more replies
Answer Match 67.2%

REceiving error message at startup McAfee said it was HP issue.The module, ending in Kinnect.dll, failed to load. Something about the binary path/begugging, and 'specified module could not be found'How do I check if this is necessary and fix?

More replies
Answer Match 67.2%

Hi all,
I am wondering how to get rid of an error message at startup.
I recently purchased a new computer and started to install internet software (sympatico) before I realized that windows XP takes care of that itself.
On startup the computer now looks for a file called vtruckdbg and asks for the setup disk to be installed, I can install the disk but an error message comes up which includes this vtruckdbg file not found message.
I can also hit cancel and the computer boots fine, it is just very annoying to get this message on each startup. How do I get rid of it?
Thanks for any help.
Rob
 

A:Error message on startup

6 more replies
Answer Match 67.2%

Hi there,

Every time I start XP a small window with the following error message occurs:

Exception Processing Message c0000013 Parameters 75b6bf9c 75b6bf9c 75b6bf9c

Whilst not a serious problem (hopefully), it is rather annoying, and I was just wondering how I might get rid of it.

Thanks,
Best regards,
Matt

A:Error Message on Startup

Hi Matt,

I just did a search for c0000013 and found a lot of problems showing up on the web. Seems something is trying to access one of your CD drives and complains when it finds nothing there. It's likely some adware that go on your machine. A good malware scan might get rid of it for you.

Best regards,
Mack1

3 more replies
Answer Match 67.2%

Hi,

My name is Jason and I'm brand new to the forum with a question. I have Windows XP and after logging in under my name to start Windows, I receive an error message saying
Error loading C:\WINDOWS\system32\gycesrkc.dll
the specified module could not be found

I've searched for the problem on google and yahoo. I found similar error messages with different endings after the system32\ such as system32\bridge.dll and others, but not my particular case.

Many various answers were given on how to fix the problem but I thought I'd go to the forum and get some one on one help to be sure I remove this correctly.

Any help would be greatly appreciated. Thank you!

Jason
 

A:Startup error message

You won't find it becuase it is a made-up name of some infection that you probably removed in a scan. You would do well to scan with more than one malware scanner to be sure that there are not others present.

For the problem you are having, download and run Autoruns. When it tells you in its status bar that it has finished scanning, look through the list (or use its search finction) to find the entry for that dll and delete it. It is no longer present, anyway.
 

1 more replies
Answer Match 67.2%

Hello,

I'm running XP pro on a Dell D820 laptop.

On startup I am receiving the error message " docmgr.exe - Unable to locate component This application has failed to start because wxvault.dll was not found. Re-installing the application may fix this problem."

I do not know which application the error message is referring to!

After a search, the file wxvault.dll is located at two places.

C:\i386 and

C:\Program Files\Dell\Embassy Trust Suite by Wave\Embassy Trust Suite\Document Manager Lite\System32

Any help would be appreciated.

Thanks

Skipper55
 

A:Error Message on Startup

hi, Looks like it would be part of the Intel motherboard programs that should be on a CD that came with the system or the motherboard if you purchased that as an upgrade at some point:
"""Embassy Trust suite uses the Trusted Platform Module (TPM) security chip on the motherboard to give you the latest in security combined with productivity features when protecting documents, securing passwords, generating digital certificates, encrypting email, logging on to Windows, managing security preferences, and more. """ (Quote from the site in link below)

http://www.intel.com/design/motherbd/software/ets/

check the site for tech support, maybe just simply reinstalling would fix it but there may be other steps to take first, I dont know...

If the program came installed as part of the Dell system, it may be able to be reinstalled through the Dell Application Recovery utility, check from Start> All Programs> Dell or Dell Application Recovery....

Start up the application recovery thing, look for "Reinstall one application" entry.

Or, it may be an a separate CD for Embassy> part of the motherboard's drivers CD since this is a chip installed on the motherboard you are dealing with. You should check the support documentation for the program and the motherboard>>> you may have the manual for the board, look in that since the chip is part of it.

Not to alarm you, but there has been a vulnerability found in DocMgr which is a... Read more

1 more replies
Answer Match 67.2%

Hi, I've been trying to get my computer to boot up (you can see the few threads I've made in order to get it to do this, haha).

Anyways, I've come across a new error, surprise surprise!

It reads:

Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation

For Realtek RTL8139(A/B/C)/RTL8130 PCI Fast Ethernet Controller v2.21 (010425)
PXE-E61: Media test failure, check cable
PXE-MOF: Exiting PXE ROM.

---------------------------------

And it just keeps repeating that - over and over and over.

Please help!
 

A:Error message on startup - PLEASE HELP!

Google search for "PXE-E61: Media test failure, check cable" gives this
http://delltalk.us.dell.com/supportforums/board/message?board.id=oplex_harddrive&message.id=5541

or this http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=526251
 

1 more replies
Answer Match 67.2%

Everytime i started up my computer i got a message saying "Windows was unable to load a cerntain file, a backup file has been loaded." I'd click "OK" and it would go away. Is this a sign of a bigger problem?

P.S. I have also had problems with video drivers and games crashing could this be related?
 

A:Startup error message

what is the name of the 'certain file' ? (and does windows name the backup file)
What is your operating system?
what are the specs of your pc? (not forgetting your graphics card)
what games are crashing?
 

3 more replies
Answer Match 67.2%

Hi folks, recently I found I had the subseven backdoor trojan/virus thingy, norton tried to repair it but couldnt, so it was left in quarantine, I deleted it from there.

Also when I look in startup from "msconfig" There are a few entries with: Winloader auyyukax.exe
run= auyyukax.exe

I have unchecked these and rebooted.
Yet still on startup I get an error message everytime
"Cannot find the file 'auyyukax.exe' (or one of its components)
This is somewhat annoying and I dont know if this trojan/virus is still working on my pc.
Any help would be very much appreciated.

Regards..
 

A:Error message on startup.

9 more replies
Answer Match 67.2%

Hello~

I haven't used my computer in three days but when i did everything was fine adn it has been turned off and unplugged from any network since. I got a new wireless router and went to turn my Fujitsu tablet pc on and the start up went fine. After ht windows logo where it loads, I get a message saying "an invlaid parameter was passed to a service or function" I am not sure what it is about and I can't even log into my computer to do anything with it. If you click of it reloads again but the message comes back. Thank you for the help and time.

Seth

A:Error Message While Startup

it comes up lsass.exe lower case l so i know its a virus.

3 more replies
Answer Match 67.2%

on almost a regular basis on opening my window I get a message after startup in my user screen
as such *****.Exe No Drive
There is no disk in drive
Please insert a disk into drive\devices\hard disk9\DR48

the **** can be anything from NCDStart, SPYSStart (and a few others) and the disk number and DR number also change with the different
***** values

Do I have a corrupt or missing dll file or what else?

I did run Norton Windoctor and no longer see any registery errors.

(I did see a missing dll file once)

I do had have a spyware program (ad-Adware) that I do run almost daily.

I also had spysweeper but because of the messages that seemed to relate the SPY I removed it. It did help alittle but I still get get some but not as many error messages as before

It really bugs me
I cant get rid of them!!!
 

More replies
Answer Match 67.2%

Hey...
i found a problem with ma computer recently.....just a few days before i started receiving an error report while starting windows.ie at the startup....like "Windows-Application error
failed to initialise properly click ok to terminate"
and wen i ok windows was bak to normal in functionality....
but the next day i found dat the windows was not booting like just the desktop was loading with ma walpaper but no taskbar and icons...
i tried restarting several times but the result was the same...
the only remedy 4 me was to kill "explorer.exe" openin ask manager(alt+cntrl+del) and rerunning the same..
still i couldnt load all my startupp apps(just the volume icon and lan icon was displayed in the system tray)..
i dint knew wat had happend actually(weather itz any kind of infections or something)...but doubtfully i uninstalled the ".net framework 4" i installed a day b4 i got d error....and the result was slight different..
this time i was able to load windows with all my icons and my desied apps in system tray...BUT my booting was taking a much more time and I WAS STILL GETTING THAT ERROR MESSAGE....
everything after booting is normal...
Can any one please help me to remove the error message thats blocking my startup(i'm attaching a screenshot here)
thanks in advance........

my pc,
intel pentium 4 processor,
1.5 gb ram,
2.66 ghz...

using
windows xp professional sp2.

A:Error message on startup!!!!!

any ways to remove the error message....itz a nuisence now a days.....tried several registry cleaners..stil the problem persists...
plzz help.....

1 more replies
Answer Match 67.2%

I had got a serious virus on my PC recently, and fixed it with little problem. However another arose when I rebooted my PC it gives me this message on startup

C:\DOCUME~1\ALLUSE~1\APPLIC~1\SPYWARE~1\sp_rsdel.exe program not found - sk1pping AUTOCHECK

http://i195.photobucket.com/albums/z158/Shutterbugg_Elite/IMG_0548.jpg

Any ideas on how to get rid of it or fix it?
Thanks in advance
 

A:Error message on startup. Need help!!1

Download ComboFix from Here to your Desktop.

**Note: It is important that it is saved directly to your desktop and run from the desktop and not any other folder on your computer**
--------------------------------------------------------------------
1. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.
Very Important! Temporarily disable your anti-virus, script blocking and any anti-malware real-time protection before performing a scan. They can interfere with ComboFix or remove some of its embedded files which may cause "unpredictable results"
Click on this link to see a list of programs that should be disabled. The list is not all inclusive. If yours is not listed and you don't know how to disable it, please ask.
Remember to re enable the protection again after combofix has finished
--------------------------------------------------------------------
2. Close any open browsers and any other programs you might have running
Double click on combofix.exe & follow the prompts.​If you are using windows XP It might display a pop up saying that "Recovery console is not installed, do you want to install?"
Please select yes & let it download the files it needs to do this
When finished, it will produce a report for you.
Please post the "C:\ComboFix.txt" along with a new HijackThis log for further review
****Note: Do not mouseclick combofix's window while it's r... Read more

1 more replies
Answer Match 67.2%

Can anyone help please as I don't have a clue what this message refers to.
Application has generated an exception that could not be handled.
Process id=0x950 (2384), Thread id=0x954 (2388),
Click OK to terminate the application,
Click CANCEL to debug the application.

When I Click cancel to debug the application, I get the following message.

" Registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0x2 (2). Please check computer settings.
cordbg.exe !a 0xf9c
Click on Retry to have the process wait while attaching a debugger manually,
Click on cancel to abort the JIT debug request
hitbit

A:Error Message at Startup

Logonhook.exe usually belongs to the McAfee data backup program. I'd suggest uninstalling it and checking to see if that fixed it. If so, you can download a fresh copy and install it and the errors should not reappear.

3 more replies
Answer Match 67.2%

I am getting a message that says, hardware monitor found an error. Enter power setup menu for details. help please, not very computer savy! thanks
 

A:error message on startup

11 more replies
Answer Match 67.2%

I get this error message when I start my computer:

Value cannot be null.
Parameter name: path1

I just click ok and it goes away. Computer will continue to startup and run. Any suggestions?
 

A:error message at startup

You might cure this by going to the Microsoft website and dowloading some up to date .Net packages. Have a look in your Control Panel>Add and remove Programmes with the Show Updates box ticked, to see which .Net packages you already have, and post back if you don't have anything after version 1.1.
 

1 more replies